Parts List Model 7800276 Revision 00 Rev. Date 03/2008
Table Of Contents PRODUCT COMPONENTS PAGES Steering... 4 Engine Mount... 6 Motion Drive... 8 Electrical System... 12 Chassis & Hood... 14 Decals... 18 Mower Housing... 20 Mower Housing Suspension... 24 Torque Specification Chart... Inside Back Cover
Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0007 4
Steering REF NO PART NO. 1 1001980MA 2 690625MA 3 1001982MA 4 094124MA 5 7090585MA 6 009x57MA 7 1001893MA 8 011x25MA 9 094121MA 10 094123MA 11 7027168SM 12 7300867ZMA 13 7300863ZMA 14 015x88MA 15 15x118MA 16 7300751ZMA 17 7300742ZMA 18 01x146MA 19 030x49MA 20 690150MA 21 7400232ZMA 22 01x111MA 23 710083MA 24 017x53MA 25 7091619SM 26 7500692ZMA 27 7101805ZMA 28 7400231ZMA 29 7101806ZMA 30 26x249MA 32 024373MA 33 091912MA -- 407924MA 34 7101798MA 35 17x195MA 36 17x192MA 37 17x113MA 38 094618MA 39 26x267MA 40 092059MA 41 0025x3MA 43 17x146MA DESCRIPTION WHEEL, Steering POST, Steering COVER, Steering Wheel Bearing (Included with Ref. No. 2) Nut, Flange ** BOLT, Shoulder GEAR, Pinion ** Ring, Snap ** GEAR, Sector BEARING BOLT PLATE, Steering PLATE, Engine NUT, Flange NUT, Flange BRACKET, Hanger AXLE, Hanger BOLT PIN, Cotter BEARING SPINDLE ASSEMBLY, Left BOLT NUT, Flange AXLE ASSEMBLY DRAG LINK, Left SPINDLE ASSEMBLY, Right DRAG LINK, Right STEM, Valve TIRE * TUBE WHEEL & TIRE ASSEMBLY HUB CAP BELLOWS Screw, Hex Footnotes Note* When you order a tire, make sure to give the brand name of the tire so that the tread pattern on the tire will match. Note** This part included when ordering Ref. No. 2. 5
Engine Mount NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0013 6
Engine Mount REF NO PART NO. 1 092317MA 2 7601092MA 3 095197MA 4 7601033MA 5 095197MA 6 26x201MA 7 7300863ZMA 8 092371MA 9 ----- 10 0025x7MA 11 690439MA 12 019x35MA 13 01x140MA 14 17x170MA 15 26x249MA 16 26x229MA 17 7300760AMA 18 26x277MA 19 7300817ZMA 20 26x213MA 21 094384MA 22 7090585MA 23 094066MA 24 1740502AMA 25 1001747MA 26 26X253MA 27 032618MA 28 1740502AMA 30 7500709AMA 31 094654MA 32 692236 33 06x103MA 34 018x15MA 35 06x104MA 36 1740504AMA 37 1740503MA 38 0019x8MA DESCRIPTION Fuel Cap (Included with Ref. No. 2) TANK, Fuel 1.4 Gal. Hose Clamp (Included with Ref. No. 2) Fuel Line (Must cut to length) (Included with Ref. No. 2) Hose Clamp (Included with Ref. No. 2) PLATE, Engine THROTTLE CONTROL Engine, Briggs & Stratton * (Model: 2198070150B1) BOLT, Engine Mount STACK PULLEY ASSEMBLY LOCK BOLT, Hex BRACKET, Muffler BRACKET, Muffler Mount GUIDE, Belt NUT, Flange GUIDE, Belt GUARD, Heat Shield EXHAUST TUBE, Single TIE, Strap, 5.38 Long GUARD, Heat Shield, Upper SHIELD, Heat MUFFLER GASKET BOLT, Washer Hex Head GUARD, Exhaust Pipe PLENUM, X1 M28/31, Star.38 0.68X Footnotes Note* For information on Replacement Parts for this engine contact the manufacturer. 7
Motion Drive NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0005 8
Motion Drive REF NO PART NO. 1 009x39MA 2 015x89MA 3 7400241MA 4 094041ZMA 5 7090585MA 6 17x102MA 7 1741756MA 8 030x20MA 9 094043ZMA 10 017x47MA 11 094044ZMA 12 021920ZMA 13 1741757MA 14 1001245ZMA 15 094815ZMA 16 1001303ZMA 17 26x249MA 18 7091619SM 19 094042ZMA 20 009x54MA 21 165x116MA 22 7300824ZMA 23 7300870ZMA 24 002x53MA 25 7300869ZMA 26 094045ZMA 27 021544MA 28 7400256ZMA 29 1001117E701MA 30 7101749MA 31 094031ZMA 32 0031x6MA 33 017x38MA 34 690369MA 35 06x105MA 36 ----- 37 015x88MA 38 020697MA 39 01x155MA 40 7300769ZMA 41 690409MA 42 7300845ZMA 43 0011x7MA DESCRIPTION BOLT, Shoulder NUT, Hex ARM, Idler ROD, Clutch NUT GRIP PIN, Cotter LEVER, Shift LINK, Shift NUT, Adjuster GRIP ROD, Parking Brake NUT, Adjuster BRACKET, Shift Pivot NUT MOUNT, Stud Spring BOLT, Shoulder SPRING, Extension BRACKET, Right Shifter FRAME, Right BOLT, Carriage FRAME, Left LATCH, Parking Brake PEDAL LEVER, Brake/Clutch BRACKET, Pedal BELT, Motion Drive YOKE, Shift PIN, Hair SPACER BOLT Transaxle ** NUT KEY, Woodruff BOLT BRACKET, Transaxle PULLEY BRACKET, Torque Strap, LH RING RETAINER Footnotes Note* When you order a tire, make sure to give the brand name of the tire so that the tread pattern on the tire will match. Note** For Replacement Parts see the Transaxle manufacturer. 9
Motion Drive NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0005 10
Motion Drive REF NO PART NO. 44 095094MA 45 021553MA 46 17x160MA 47 1401103MA 48 024373MA 49 091923MA -- 407049MA 50 092288601MA 51 17x195MA 52 0011x3MA 53 094618MA 54 093349MA 55 0031x4MA 56 165x115MA 57 165x92MA 58 26x216MA 59 17x148MA 60 26x267MA 61 17x169MA 62 015x98MA 63 017x53MA DESCRIPTION PULLEY Drive KEY, Square SPACER, Transaxle STEM, Valve Tire * TUBE (Not Illustrated) WHEEL & TIRE ASSEMBLY E-Ring HUB CAP GUIDE, Belt PIN, Hair SPRING, Extension SPRING, Extension NUT, Hex Footnotes Note* When you order a tire, make sure to give the brand name of the tire so that the tread pattern on the tire will match. Note** For Replacement Parts see the Transaxle manufacturer. 11
Electrical System NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0021 12
Electrical System REF NO PART NO. 1 250x92MA -- 1001716MA -- 090084MA 2 250x113MA 3 092377MA -- 020729MA -- 091489MA -- 091488MA 4 1001575MA 5 302031MA -- 407078MA 6 1002004MA -- 26x229MA -- 15x116MA 7 024x32MA -- 26x229MA 8 ----- -- 002x82MA -- 014x79MA -- 690604MA 9 250x149MA 10 094159MA 11 024x31MA DESCRIPTION HARNESS, Light Wire SOCKET, Light BULB, Light HARNESS, Chassis Wire SWITCH, Ignition KEY, Ignition NUT, Hex CAP, Ignition SWITCH, Limit FUSE HOLDER, Fuse SOLENOID, Mounting LOCKNUT CABLE, Battery Ground, Ground Cable BATTERY 165 CCA 7.2V min. 7.57 x 5.25 x 6.33 BOLT, Carriage WINGNUT BOOT, Battery Terminal, Positive HARNESS, Seat Switch Wire SWITCH, Seat Sensor CABLE Footnotes 13
Chassis & Hood NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0003 14
Chassis & Hood REF NO PART NO. 1 094161MA 2 028X23MA 3 094057MA 4 26X229MA 5 1001054MA 6 017X47MA 7 009X56MA 8 7300875ZMA 9 094156ZMA 10 7300794ZMA 11 001X45MA 12 015X89MA 13 009X55MA 14 094155ZMA 15 164X31MA 16 26X249MA 17 26X263MA 18 164X30MA 19 7300843ZMA 20 15X123MA 21 7300839ZMA 23 094999MA 24 094998MA 25 7300786ZMA 26 7300778ZMA 27 1001806MA 28 1001805MA 29 1740530ZMA 30 7300741ZMA 31 26X270MA 32 26X238MA 33 1001491MA 34 7300774TMA 35 26X201MA 36 7300750TMA 37 7300872TMA 38 7300751ZMA 39 1740529MA 40 7300742ZMA 41 26X263MA 42 009X58MA 43 7300870ZMA 44 7300869ZMA Footnotes DESCRIPTION SEAT CAP, Push On SPRING BOLT, Wing BOLT, Shoulder SUPPORT, Seat ROD, Pivot BRACKET, Pivot BOLT NUT BOLT, Shoulder SPRING SPRING DECK, Seat NUT PLATE, Index MAT, Left MAT, Right HOOD, WM1 GRILLE LENS HOUSING, Headlamp BRACKET, Lower Pivot SUPPORT, Battery BEARING, Steering DASH PANEL, Access SUPPORT, Dash BRACKET, Rear Hanger BRACKET, Support AXLE, Hanger BOLT, Shoulder FRAME, Right FRAME, Left 15
Chassis & Hood NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0003 16
Chassis & Hood REF NO PART NO. 45 690424MA 46 7300864ZMA 47 7300832ZMA 48 7500709AMA 49 015X81MA 50 26X277MA 51 7091619SM 53 1741762MA 54 1741763MA 55 1741764MA 56 1741760MA 57 1741761MA 58 094376MA 59 1001755MA 60 015X82MA 61 028x83MA 62 009x49MA 70 1741770MA -- 1002050MA -- 7101912 -- DESCRIPTION CONTAINER, Battery PLATE, Hitch PANEL, Rear SHIELD, Heat NUT NUT INSERT, Center Grille INSERT, Left Grille INSERT, Right Grille INSERT, Left Hood INSERT, Right Hood BUMPER GROMMET, Parking Brake NUT S-CLIP, Black BOLT HOLDER, Cup PARTS BAG, Assembly INSTRUCTION BOOK MANUAL, Parts List Footnotes 17
Decals NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0023 18
Decals REF NO PART NO. 1 48X4033MA 2 1740552MA 3 7101905MA 4 48X4032MA 5 44X7026MA 6 44X7027MA 7 48X4034MA 8 44X5437MA 9 44X6277MA 10 48X5451MA 11 44X5936MA 12 48X511MA 13 44X6828MA 14 44X6817MA 15 48X5911MA 16 44x6595MA DESCRIPTION DECAL, Cut Finger Symbols DECAL, Murray R.H. & L.H. DECAL, 125/96 R.H. & L.H. DECAL, Warning Export DECAL, 7 Position Cut Height DECAL, Deck Level DECAL, No Step Export DECAL, Brake/Clutch Export DECAL, B&S Logo DECAL, 5 Speed DECAL, Heat Shield Warning DECAL, Warning Load Limit Export DECAL, Warning Pinch Point DECAL, Dash/Symbols X-W Styles DECAL, 100db Export DECAL, Gas Gauge Footnotes 19
Mower Housing NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0009 20
Mower Housing REF NO PART NO. 1 092852MA 2 15x140MA 3 037x86MA 4 091801MA 5 7091619SM 6 1001197MA 8 7300749ZMA 9 094137MA 10 009x52MA 11 7300826ZMA 12 7400244ZMA 13 094068MA 14 009x51MA 15 7300878ZMA 16 166x43MA 17 7090585MA 18 7300735ZMA 19 095194MA 20 017x91MA 21 0031x4MA 22 0025x6MA 23 7300859ZMA 24 009x39MA 25 1001499MA 26 166x41MA 27 7400243ZMA 28 7300732ZMA 29 166x42MA 30 7300738ZMA 31 7300834ZMA 32 015x88MA 33 002x53MA 34 1001200MA 35 7300767ZMA 36 690411MA 37 7101751AMA 38 17x166MA 39 17x165MA 40 15x100MA 41 0166x4MA 42 028x23MA 43 094957ZMA 44 094707MA Footnotes DESCRIPTION PULLEY, Jackshaft NUT, Hex BELT, Mower Drive PULLEY, Idler NUT, Flange SPACER, Pulley (Included with Ref. No. 34) LINK, Lift PAD, Friction BOLT, Shoulder BRACKET, Suspension PAD ASSEMBLY, Left Brake KNOB BOLT, Shoulder PLATE, Suspension SPRING NUT, Flange BRACKET, Left Suspension PIN, Hanger PIN, Cotter BOLT BELT, Guide BOLT, Shoulder ARM, Idler SPRING PAD ASSEMBLY, Right Brake BRACKET ASSEMBLY, Brake SPRING BRACKET, Right Suspension PLATE NUT, Flange BOLT, Carriage MANDRELL (Includes Ref. No. 6) BRACKET, Suspension ADAPTER, Blade BLADE NUT SPRING CAP, Push On ROD, Pivot DEFLECTOR ASSEMBLY 21
Mower Housing NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0009 22
Mower Housing REF NO PART NO. 45 7300812ZMA 46 7300734ZMA 47 017x45MA 48 094781MA 50 7300766ZMA 51 26x249MA 52 165x118MA 53 690369MA 54 7300788ZMA 55 015x98MA 56 009x72MA 57 17x174ZMA 62 7300781ZMA 63 7300782ZMA 64 26x263MA DESCRIPTION BRACKET, Deflector BRACKET, Front Hanger GUIDE, Belt BRACKET, Support SPRING, Extension SPACER HOUSING, Export Blade (Includes Ref. No. 17, 18, 30, 31, 32, 33, 45, 46, 47 & 51.) NUT, Flange BOLT, Shoulder GUARD, Belt L.H. GUARD, Belt R.H. Footnotes 23
Mower Housing Suspension NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0011 24
Mower Housing Suspension REF NO PART NO. 1 1741757MA 2 094157ZMA 3 094022ZMA 4 0025x3MA 5 1741756MA 6 166x40MA 7 17x103MA 8 690533MA 9 094017ZMA 10 009x39MA 11 030x20MA 12 017x57MA 13 094004YZMA 14 7091619SM 15 26x249MA 16 166x39MA 17 7300821TMA 18 165x118MA 19 7101804MA 20 7300749ZMA 21 7300877ZMA 22 17X168ZMA 23 017x57MA 24 0031x4MA 25 017x91MA 26 002x85MA 27 7500525ZMA 30 094067MA 31 7300826ZMA 32 690151MA 33 009x53MA 34 7300819ZMA 36 17x191MA 37 7091619SM 38 165x131MA 39 015x68MA 40 7300796ZMA 41 7300860ZMA 42 7300861ZMA 43 094158ZMA 44 7300767ZMA 45 7300868ZMA DESCRIPTION GRIP HANDLE, PTO PAD, Switch Screw, Hex GRIP SPRING HANDLE, Lift LEVER, PTO BOLT, Shoulder PIN, Cotter LINK, PTO NUT, Flange SPRING BRACKET, PTO SPRING, PTO CRANK, PTO LINK, Lift LINK, Lift Handle PIN, Hair BOLT, Carriage LEVER ASSEMBLY, Lift PIN BRACKET, Rear Suspension SPACER, Lifter BOLT, Shoulder BRACKET, Pivot NUT, Flange SPRING NUT, Flange BRACKET, PTO HANGER, Left Deck HANGER, Right Deck ROD, Hanger BRACKET, Suspension PLATE, Stiffening Footnotes 25
Hardware Identification & Torque Specifications Common Hardware Types Hex Head Capscrew Washer Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Carriage Bolt Lockwasher Hex Nut Standard Hardware Sizing When a washer or nut is identified as 1/2, this is the Nominal size, meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2-16 x 2, this means the Nominal size, or body diameter is 1/2 inch; the second number represents the threads per inch (16 in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. 0 1/4 1/2 3/4 1 1/4 1/2 3/4 2 1/4 1/2 3/4 3 1/4 1/2 3/4 Screw, 1/2 x 2 Body Diameter Body Length Nut, 1/2 Inside Diameter Hardware Grade No Marks SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8.6 10 13.6 14 19.0 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. 4 Wrench & Fastener Size Guide 1/4 5/16 3/8 7/16 DIA. 1/2 DIA. 1/4 Bolt or Nut Wrench 7/16 5/16 Bolt or Nut Wrench 1/2 3/8 Bolt or Nut Wrench 9/16 7/16 Bolt or Nut Wrench (Bolt) 5/8 Wrench (Nut) 11/16 1/2 Bolt or Nut Wrench 3/4