PPUH AUTO-HAK Sp.J. Towing hitch (without electrical set) Towbar accessories: Approval number according to Directive 94/20/EC: e20*94/20*0631*00

Similar documents
The instruction of the assembly NOTE

The instruction of the assembly

FITTING INSTRUCTION. The instruction of the assembly

PPUH AUTO-HAK Sp.J. Towing hitch (without electrical set) Approval number acc. to regulations EKG/ONZ 55.01: E20-55R

Original hole. Fig. 1

FITTING INSTRUCTION. The instruction of the assembly

The instruction of the assembly FITTING INSTRUCTION

NOTE FITTING INSTRUCTION

FITTING INSTRUCTION. The instruction of the assembly

The instruction of the assembly

PPUH AUTO-HAK S.J. Towing hitch (without electrical set) Towing hitch equipment: Approval number according to Directive 94/20/EC: e20*94/20*0593*00

Fig.2 Fig.3 Fig.4 FITTING INSTRUCTION

FITTING INSTRUCTION. Torque settings for nuts and bolts (8,8): M 8-25 Nm M Nm M Nm M Nm NOTE

The instruction of the assembly FITTING INSTRCUTION

FITTING INSTRUCTION. The instruction of the assembly

INSTALLATION INSTRUCTIONS

Montage- und Betriebsanleitung Sattelkupplung JSK 26 D 5. Installation and operating instrutions for fifth wheel coupling JSK 26 D 17

VOLKSWAGEN AMAROK TOWBAR FITTING INSTRUCTION

INSTALLATION INSTRUCTIONS

KNOTT-AVONRIDE LTD. Welcomes You To Our Trailer Type Approval Seminar. O 1 & O 2 Trailers

TRAILER PASSPORT. instruction manual maintenance warranty

Instruction Manual Montage- und Betriebsanleitung Notice d utilisation

Montage- und Betriebsanleitung Installation and operating instructions Instructions de montage et d utilisation. Member of JOST-World

JSK 34. Installation and operating instructions

-Montage- und Betriebsanleitung

11 Important: Use only the BMW X5 (E70) ball mount kit, available from BMW centers, with the following specifications:

Installation and Operation Instructions RINGFEDER Type 2050 AM RINGFEDER Type 2050 AP

Offshore manufacturing and fabrication: guidelines for heavy trailers (class TC and TD)

INSTALLATION INSTRUCTIONS

December Transporter

ISTRUZIONI DI MONTAGGIO

Alfa Romeo 156 Q4 Service Manual

Manuelle Kugelkupplung Non-automatic ball coupling Attelage à boule verrouillage manuel

Repairing a salvage vehicle

A basic distinction is made between rigid, removable and swivel hitches to suit the requirements of the user.

Towing units. General information on towing units PGRT

-Montage- und Betriebsanleitung

Rear end adaptations. Adapted length of rear overhang. Variant codes for some commonly occurring dimensions

Safety and Installation Instructions For Fluitecnik PV Modules

TYPE APPROVAL DOCUMENTS EXPLANATIONS

SAFETY. Injury hazard

Installation Instructions

2018 Rocky Mountain Raceways TRAILER RACE RULES

Original BMW Accessories. Installation Instructions.

R O A D S A F E T Y E D U C A T I O N

Safety Sentry Electronic Breakaway Switch

Contents. Page. Page 2 of 9

Electric wiring kit for towbars / 7-pin / 12N / 12 Volt / ISO 1724

EXTRACT of chapter XXXIV coupling devices (version of ) ANNEX XXXIV Requirements on mechanical couplings

KRONE - Profi Liner. Quantity: 2 Type: SDP 27 elp3-cs. Technical specification/description

Electric wiring kit for towbars / 13-pin / 12 Volt / ISO 11446

Explosion protected terminal boxes type, GHG 72.

BMW, 3er Coupè / Cabrio (E92/E93) Montage- und Betriebsanleitung. Montážní a provozní návod

Blec Bar grader Serial number: User manual and parts handbook

AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W Trailer Hitches 1216 Hawaii Rd / PO Box 186 Humboldt, KS P: F:

INDEX FULL SERVICE FOR YOUR FULLBACK. Pag 04 FULL PERSONALIZATION. Pag 14 FULL FUNCTIONALITY

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W Trailer Hitches 1216 Hawaii Rd / PO Box 186 Humboldt, KS P: F:

HAYMAN REESE PART No: 03099RW BMW X4 F26 Series May 2014 Onwards INSTALLATION INSTRUCTIONS

Installation Instructions

Installation and Operational Instructions for ROBATIC -clutch Type and Type Sizes 3 9

Information Sheet

Electric wiring kit for towbars / 7-pin / 12N / 12 Volt / ISO 1724

Vista TM from Volkswagen and Allied Mobility

2/2 way Angle-Seat Valve for medium up to C, DN15-50

PALLET TRUCK PAINTED OPERATING INSTRUCTIONS MAINTENANCE MANUAL PARTS CATALOGUE DECLARATIONS OF CONFORMITY

Technical Information

Operating instructions Safety sensor BNS About this document. Content. 6 Disassembly and disposal 6.1 Disassembly Disposal...

Parkit360 Transformer

Installation and Operating Instructions Electric Vibrators HV/VFL Series

Stolen and Wrecked Vehicle Monitoring Program

Motors and Gearboxes for Warehouse Logistics. Energy efficient Compact Sustainable

VINYL WINDOWS & DOORS

Contactors. CH1130/02 Series Single pole high-voltage contactor up to 3 kv Catalogue C170.en. Connect - Contact - Control

AEROTRANSPORT LASHING


Price list 8 February The Caddy

ISTRUZIONI DI MONTAGGIO FITTING INSTRUCTIONS INSTRUCTIONS DE MONTAGE MONTAGEANLEITUNG INSTRUCCIONES DE MONTAJE

Motors and Gearboxes for Warehouse Logistics. Energy efficient Compact Sustainable

2001 (Aug) Toyota Supra VVTi Tiptronic. Black

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> BASE BOLT BAG (RVB3500) ITEM DESCRIPTION QTY. 1 2 " X 1 1 2" Hex Cap Screws 16

Reliable fuel effi cient engines. Energy effi cient compressor rotor design built to close engineering tolerances.

Dummy Trailer Hitch Instructions

Electric wiring kit for towbars / 7-pin / 12N / 12 Volt / ISO 1724

MAKE THE RIDE THE BEST PART OF YOUR DAY

11422 INSTALLATION INSTRUCTIONS

SECTION 11 INTERMODAL EQUIPMENT

Subject: ACEA proposal for Euro 6 OBD and Euro 6 PN limit for gasoline direct injection engines.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

DRUM STANDS & TRAILERS STRINGING EQUIPMENT CATALOGUE

11422 INSTALLATION INSTRUCTIONS

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W Trailer Hitches 1216 Hawaii Rd / PO Box 186 Humboldt, KS P: F:

NOTICE Maximum allowed length=7" (178mm)

Installation Instructions GOOSENECK MOUNTING KIT Toyota Tundra

Body assembly guidelines Volkswagen Nutzfahrzeuge


Electric wiring kit for towbars / 13-pin / 12 Volt / ISO 11446

SAFETY. Read and understand all safety precautions and instructions before installing this product.

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W

RINGFEDER. Automatic Trailer Couplings for connecting to 40 mm drawbar eyes according to DIN Type 604/ 605/ 6041/ 6051/ 6061.

Transcription:

Towbar accessories: PPUH AUTO-HAK Sp.J. Produkcja Zaczepów Kulowych Henryk & Zbigniew Nejman 6-200 SŁUPSK ul. Słoneczna 16K tel/fax (059) 8-414-414; 8-414-413 e-mail: office@autohak.com.pl www. autohak.com.pl Towing hitch (without electrical set) Class: A50-X Cat. no. H11A Designed for: SKODA FELICIA PICK-UP and VOLKSWAGEN CADDY PICK-UP both produced since 1996 Technical data: D-value: 6,5 kn maximum trailer weight: 1000 kg maximum vertical cup load: 50 kg Approval number according to Directive 94/20/EC: e20*94/20*0631*00 Foreword This towbar is designed according to rules of safety traffic regulations. The towing hitch is a safety component and can be install only by qualified personnel. Any alteration or conversion of the towing hitch is prohibited and would lead to cancellation of design certification. Remove insulating compound and underseal from vehicle (if present) in the area of the matting surfaces of the towing hitch. The vehicle manufacturer s specifications regarding trailer load and max. vertical cup load are decisive for driving, and values for the towing hitch cannot be exceeded. D-value formula: Max trailer weight [kg] x Max trailer weight [kg] + Max vehicle weight [kg] Max vehicle weight [kg] X 9,81 1000 = D [kn]

Clamp mark in acc. with Cables joining ISO PN 1 L Left directional lights 2 + Rear fog lights 3 31 Ground 4 R Right directional lights 5 58R Right side parking lights 6 54 Stoplights 58L Left side parking lights FITTING INSTRUCTION 1 5 5 5 6 The instruction of the assembly 1. From bottom of the car position the main bar of the towbar (pos. 1) to the chassis members and fix it through the original two holes (per side) using bolts M10x35mm pos. (Jibs with the nut put through the ellipse holes in the chassis members from bottom of the chassis members). 2. To so prepared car fix body of the automat (pos. 8) and the socket plate (pos. 3) using bolts M12x25mm (pos. 6) from accessories. Place tow-ball (pos. 2) according to supplied instruction. 3. Tighten all nuts and bolts according to the torque shown in the table. 4. Connect electric wires of -poles socket according to the instruction of the car. (Recommend to make at authorized service station). 5. Complete the paint cover of towbar (during the mounting paint cover could be destroyed). 3 8 2 Torque settings for nuts and bolts (8,8): M6-11 Nm M 8-25 Nm M 10-50 Nm M 12-8 Nm M 14-138 Nm M16-210 Nm This towbar is designed to assembly in following cars: SKODA FELICIA PICK-UP and VOLKSWAGEN CADDY PICK-UP, both produced since 1996, catalogue no. H11A and is prepared to tow trailers max total weight 1000 kg and max vertical mass 50 kg. From manufacturer Thank you for buying our product. Their reliability has been confirmed in many tests. Reliability of towbar depends also on correct assembly and right operation. For this reasons we kindly ask to read carefully this instruction and apply to hints. NOTE After install the towbar you should get adequate note in registration book (at authorised service station).the car should be equipped with: Indicators Tow mirrors After 1000km of exploitation check all bolts and nuts. The ball of towbar must be always kept clear and conserve with a grease. The towbar should be install in points described by a car producer.

Aesthetic Design Stylish slim, sleek, discreet and sophisticated Highest European Quality EU Made Designed and installed according to mounting points marked by your car manufacturer. OEM Quality No welding, drilling or changes to your car chassis. Our tow bars are a "Perfect Fit" Strong Robust Safe Quick & Easy to use State of the art technology Fully EU (European and UK) approved. Tested over 2 million times. ISO 9001:2008 Certified.

Invisible Quick Release Fixed State of the art, slim, sleek, discreet and sophisticated. After detaching the tow ball, the system is completely invisible. Recommended for those who value aesthetics, as the design of your vehicle remains intact. Our QR detachable tow bar system is currently the most popular in the market. The beauty of this type of bar is that the neck simply un-clips (Quick Release) when not in use it, leaving little or nothing of the tow bar to see. Slim, sleek and sophisticated, our fixed tow bar combines quality with excellent value for money. Our fixed tow bar is permanently attached, recommended for those who frequently tow..

Invisible Quick Release