SP A, SP Submersible motors Accessories For raw water supply, irrigation systems, groundwater lowering, pressure boosting and various industrial applications. 5 Hz TM 7318 2298
Contents General data Performance range Page 3 Type key Page 4 Pumped liquids Page 4 Operating conditions Page 4 Curve conditions Page 4 Pump range Page 5 Motor range Page 5 Motor protection and controllers Page 5 Features and benefits Page 6 Material specification Page 8 Submersible motors Features and benefits Page 9 Shaft seal Page 11 Material specification for MS motors Page 12 Material specification for MMS motors Page 13 Performance curves Technical data Power curves SP 1A Page 14 SP 2A Page 16 SP 3A Page 18 SP 5A Page 2 SP 8A Page 22 SP 14A Page 24 SP 17 Page 26 SP 46 Page 36 SP 6 Page 41 SP 77 Page 46 SP 95 Page 51 SP 125 Page 56 SP 16 Page 61 SP 215 Page 66 Accessories CU 3 Page 75 R1 Page 79 G1 Page 82 MTP 75 motor protection Page 84 Connecting pieces Page 85 Cable termination kit with plug Page 86 Cable termination kit type KM Page 86 Zinc anodes Page 86 Flow sleeves Page 87 SA-SPM control boxes Page 87 Capacitors for MS 42B PSC Page 87 Pt1 Page 88 Energy consumption Energy consumption of submersible pumps Page 89 Cable sizing Cables Page 9 Table of head losses Head losses in ordinary water pipes Page 94 Head losses in plastic pipes Page 95 Technical data 1 x 23 V, submersible motors Page 71 3 x 23 V, submersible motors Page 71 3 x 23 V, submersible rewindable motors Page 71 3 x 4 V, submersible motors Page 72 3 x 4 V, submersible industrial motors Page 72 3 x 4 V, submersible rewindable motors Page 73 3 x 5 V, submersible motors Page 73 3 x 5 V, submersible industrial motors Page 74 3 x 5 V, submersible rewindable motors Page 74 2
General data SP A, SP Performance range p [kpa] 6 H [m] 6 SP 5 Hz 4 4 2 2 1 1 8 8 6 6 4 4 SP 1A SP 2A SP 3A SP 5A SP 8A SP 14A SP 17 SP 3 SP 46 SP 6 SP 77 SP 95 SP 125 SP 16 SP 215 2 2 1 1 1 2 4 6 8 1 2 4 6 8 1 2 4 Q [m³/h].4.6.8 1 2 4 6 8 1 2 4 6 Q [l/s] TM 7254 12 3
General data Type key Example SP 95-5 - A B N Type range (SP A, SP) Nominal flow rate in m³/h Number of impellers First impeller with reduced diameter (A, B or C) Second impeller with reduced diameter (A, B or C) Stainless steel parts of material = DIN W.-Nr. 1.431 N = DIN W.-Nr. 1.441 R = DIN W.-Nr. 1.4539 Pumped liquids Clean, thin, non-aggressive liquids without solid particles or fibres. The special SP A-N and SP-N versions made of stainless steel to DIN W.-Nr. 1.441 and SP A-R and SP-R versions made of stainless steel to DIN W.-Nr. 1.4539 are available for applications involving aggressive liquids. Operating conditions Flow rate, Q:.1-28 m³/h. Head, H: Maximum 66 m. Maximum liquid temperature: Motor Grundfos MS 4" and 6" Grundfos MS 4" and 6" Grundfos MS industry versions 4" and 6" Grundfos MMS 6" to 12" rewindable Flow velocity past motor Free convection m/s Installation Vertical 2 C Horizontal Flow sleeverecommended.15 m/s 4 C 4 C.15 m/s 6 C 6 C Free convection m/s 2 C 2 C.15 m/s 25 C 25 C.5 m/s 3 C 3 C Curve conditions SP A, SP The conditions below apply to the curves shown on the following pages: General Curve tolerances according to ISO 996, Annex A. The performance curves show pump performance at actual speed cf. standard motor range. The speed of the motors is approximately: 4" motors : n = 287 min -1 6" motors : n = 287 min -1 8" to 12" motors : n = 29 min -1 The measurements were made with airless water at a temperature of 2 C. The curves apply to a kinematic viscosity of 1 mm²/s (1cSt). When pumping liquids with a density higher than that of water, motors with correspondingly higher outputs must be used. The bold curves indicate the recommended performance range. The performance curves are inclusive of possible losses such as non-return valve loss. SP A curves Q/H: The curves are inclusive of valve and inlet losses at the actual speed. Power curve: P 2 shows pump power input at the actual speed for each individual pump size. Efficiency curve: shows pump stage efficiency. SP curves Q/H: The curves are inclusive of valve and inlet losses at the actual speed. Operation without non-return valve will increase the actual head at nominal performance by.5 to 1. m. NPSH: The curve is inclusive of suction interconnector and shows required inlet pressure. Power curve: P 2 shows pump power input at the actual speed for each individual pump size. Efficiency curve: shows pump stage efficiency. Note: For MMS 6, 37 kw, MMS 8, 11 kw, and MMS 1, 17 kw, the maximum liquid temperature is 5 C lower than the values stated in the table above. For MMS 1, 19 kw the temperature is 1 C lower. Operating pressure: Motor Grundfos MS 4" and 6" Grundfos MMS 6" to 12" rewindable Maximum operating pressure 6MPa(6bar) 2.5MPa(25bar) 4
General data SP A, SP Pump range Type SP1A SA SP3A SP5A SP8A SP14A SP17 SP3 SP46 SP6 SP77 SP95 SP125 SP16 S15 Steel: DIN 1.431 AISI 34 + + + + + + + + + + + + + + + Steel: DIN 1.441 AISI 316 + + + + + + + + + + + + Steel: DIN 1.4539 AISI 94L + + + + + Connection * Rp 1¼ Flange connection: Grundfos flange Rp 1¼ (R 1¼) Rp 1¼ Rp 1½ (R 1½) Rp 2 (R 2) * Figures in brackets ( ) indicate connection for pumps in sleeve. Rp 2 Rp 2½ (R 3) Rp 3 (R 3) Rp 3 Rp 4 (R 4) Rp 3 Rp 4 Rp 5 Rp 5 Rp 6 Rp 6 Rp 6 5" 5" 6" 6" 6" Motor range Motor output [kw].37.55.75 1.1 1.5 2.2 3. 3.7 4. 5.5 7.5 9.2 11 13 15 18.5 22 26 3 37 45 55 63 75 92 11 132 147 17 19 22 25 Single-phase + + + + + + Three-phase + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Industrial motor + + + + + + + + + + + + Rewindable motor + + + + + + + + + + + + + + + + + + + + + + + + Steel: DIN 1.431 AISI 34 + + + + + + + + + + + + + + + + + + + Steel: DIN 1.431 and cast iron + + + + + + + + + + + + + + + + + + + + + + + + + Steel: DIN 1.4539 AISI 94L + + + + + + + + + + + + + + + + + Built-in temperature transmitter in motor + + + + + + + + + + + + + + + + + Direct-on-line starting is recommended up to 75 kw. Soft starter or autotransformer is recommended above 75 kw. Motors with star/delta are available from 5.5 kw. Motor protection and controllers Motor output [kw].37.55.75 1.1 1.5 2.2 3. 3.7 4. 5.5 7.5 9.2 11 13 15 18.5 22 26 3 37 45 55 63 75 92 11 132 147 17 19 22 25 MTP 75 * + + + + + + + + + + + + + + + + + CU 3 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Pt1 + + + + + + + + + + + + + + + + + + + + + + + + + Zinc anode + + + + + + + + + + + + + + + + + + + + + + + + + + + Vertical flow sleeve + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Horizontal flow sleeve + + + + + + + + + + + + + + + + + + SA-SPM + + + + + + R1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + RS-485 communication module + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + G1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + SM1 sensor module + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + * Requires motor with built-in temperature transmitter. Motor protection af single-phase motor, see "Technical data" page 71. 5
SP A, SP Features and benefits Awidepumprange Grundfos offers submersible pumps with energy-efficient duty points ranging from 1 to 28 m 3 /h. The pump range consists of many pump sizes - and each pump size is available with an optional number of stages to match any duty point. High pump efficiency Often pump efficiency is a neglected factor compared to the price. However, the observant user will notice that price variations are without importance to water supply economics compared to the importance of pump and motor efficiencies. Example: When pumping 2 m 3 /h with a head of 1 m for a period of 1 years EURO 6, will be saved if a pump/motor having a 1% higher efficiency is chosen and the price is EURO.1 per kwh. Applications Grundfos offers a complete range of pumps and motors which as a standard are made completely of stainless steel to DIN W.-Nr. 1.431 (AISI 34). This provides for good wear resistance and a reduced risk of corrosion when pumping ordinary cold water with a minor content of chloride. A pump range made of upgraded stainless steel is available for more aggressive liquids: SP N: DIN W.-Nr. 1.441 (AISI 316) SP R: DIN W.-Nr. 1.4539 (AISI 94L) Alternatively, a complete range of zinc anodes for cathodic protection is available, see page 86. For example this may be advisable for sea water applications. For slightly polluted liquids containing for example oil, Grundfos offers a complete range (SP NE) in stainless steel to DIN W.-Nr. 1.441 (AISI 316) with all rubber parts made of FKM. Low installation costs Stainless steel means low weight facilitating the handling of pumps and resulting in low equipment costs and reduced installation and service time. In addition pumps will be as new after service due to the high wear resistance of stainless steel. [%] 1 9 8 7 6 5 4 3 2 1 1A 5 Hz 3A 5A 8A 14A 17 3 6 95 16 2A 46 77 125 215,1 1 5 1 5 1 5 Q [m³/h] TM 7255 1898 TM 73 1196 6
SP A, SP Bearings with sand channels All bearings are water-lubricated and have a squared shape enabling sand particles, if any, to leave the pump together with the pumped liquid. Inlet strainer The inlet strainer prevents particles over a certain size from entering the pump. Non-return valve All pumps are equipped with a reliable non-return valve in the vale casing preventing back flow in connection with pump stoppage. Furthermore, the short closing time of the non-return valve means that the risk of destructive water hammer is reduced to a minimum. The valve casing is designed for optimum hydraulic properties, to minimize the pressure loss across the valve and thus contributes to the high efficiency of the pump. Valve flap TM 731 196 TM 732 196 TM1 2499 1798 Priming screw All Grundfos 4" pumps are fitted with a priming screw. Consequently, dry running is prevented, because the priming screw will make sure that pump bearings are always lubricated. Due to the semi-axial impellers of large SP pumps this priming is automatically provided. However, it applies to all pump types that if the water table is lowered to a level below the pump inlet neither pump nor motor will be protected against dry running. Stop ring The stop ring prevents damage to the pump during transport and in case of up-thrust in connection with start-up. The stop ring, which is designed as a thrust bearing, limits axial movements of the pump shaft. The stationary part of the stop ring (A) is secured in the upper chamber. The rotating part (B) is fitted above the split cone (C). A B C TM 734 196 TM1 3327 3898 7
SP A, SP Material specification Example: SP 77 Pos. Components Materials Standard N-version 1 Valve casing Stainless steel 1.431 34 1.441 316 1d O-ring NBR 2 Valve cup Stainless steel 1.431 34 1.441 316 3 Valve seat Stainless steel 1.431 34 1.441 316 3a Lower valve seat retainer Stainless steel 1.431 34 1.441 316 3b Upper valve seat retainer Stainless steel 1.431 34 1.441 316 4 Bottom chamber Stainless steel 1.431 34 1.441 316 6b Upper bearing Stainless steel/ NBR 7 Neck ring NBR/PPS 8 Bearing NBR 8a Spacing washer for stop ring Carbon/graphite HY22 in PTFE mass 1.431 34 1.441 316 8b Stop ring Stainless steel 1.441 316 1.441 316 9 Chamber Stainless steel 1.431 34 1.441 316 1 Upper chamber with stop ring Stainless steel 1.431 34 1.441 316 11 Split cone nut Stainless steel 1.431 34 1.441 316 11c Nut for stop ring Stainless steel 1.441 316 1.441 316 12 Split cone Stainless steel 1.431 34 1.441 316 13 Impeller Stainless steel 1.431 34 1.441 316 14 Suction interconnector Stainless steel 1.431 34 1.441 316 15 Strainer Stainless steel 1.431 34 1.441 316 16 Shaft Stainless steel 1.457 431 1.446 329 17 Strap Stainless steel 1.431 34 1.441 316 18 Cabel guard Stainless steel 1.431 34 1.441 316 19 Nut for strap Stainless steel 1.431 34 1.441 316 24 Coupling Stainless steel 1.446 329 1.446 329 39 Spring for valve cup Stainless steel 1.431 34 1.441 316 7 Valve guide Stainless steel 1.431 34 1.441 316 71 Washer Stainless steel 1.441 316 1.441 316 72 Wear ring Stainless steel 1.431 34 1.441 316 8a 11c 16 7 17 71 19 1 7 39 2 3b 3 1d 3a 6b 8b 1 7 8 9 13 72 4 11 12 18 15 14 24 TM1 2359 22 8
Submersible motors SP A, SP Features and benefits A complete motor range Grundfos offers a complete submersible motor range in different voltages: Submersible motors, MS: 4" motors, single-phase up to 2.2 kw: 2wire 3wire PSC (permanent split capacitor) 4" motors, three-phase up to 7.5 kw 6" motors, three-phase from 5.5 kw to 3 kw Submersible rewindable motors, MMS: 6" motors, three-phase from 3.7 kw up to 37 kw 8" motors, three-phase from 22 kw up to 11 kw 1" motors, three-phase from 75 kw up to 19 kw 12" motors, three-phase from 147 kw up to 25 kw High motor efficiency Within the area of high motor efficiency Grundfos is a market leader. This is due to a newly developed motor concept which is introduced with the MS 4 and MS 6 motors. Rewindable motors The two pole Grundfos MMS submersible motors, which are all of the canned-rotor type, are easily rewinded. The windings of the stator are made of a special water-proof wire of pure electrolytic copper sheathed with special non-hydroscopic thermoplastic material. The high dielectric strength properties of this material allow direct contact between the windings and the liquid for efficient cooling of the windings. Industrial motors For heavy-duty applications Grundfos offers a complete motor range of industrial motors with up to 5% higher efficiency than that of Grundfos' standard motors. The industrial motors are available in sizes from 2.2 kw up to 22 kw. The cooling of the motor is very efficient due to the large motor surface. The efficient cooling makes it possible to increase the liquid temperature to 6 C at a flow of minimum.15 m/s past the motor.the industrial motors are for customers who value low operating costs and long life higher than price. Grundfos industrial motors are developed for difficult operating conditions. These motors will stand a higher thermal load than standard motors and thus have a longer life when subjected to high load. This applies whether the high load is caused by bad power supply, hot water, bad cooling conditions, high pump load etc. MS motors MMS motors TM 735 196 TM1 7873 4799 9
Submersible motors SP A, SP Overtemperature protection Both for Grundfos MS and MMS submersible motors accessories for protection against overtemperature is available. When the temperature becomes too high, the protection device will cut-out and damage to the pump and motor be avoided. Restart of the motor after cut-out can be achieved in two ways: manual restart or automatic restart. Automatic restart means that the CU 3 attempts to restartthemotorafter15min.ifthefirstattemptisnot successful, restarting will be reattempted at 3-minute intervals. MS: The Grundfos MS submersible motors are available with a built-in Tempcon temperature transmitter for protection against overtemperature. By means of the transmitter it is possible to read out and/or monitor the motor temperature via an MTP 75 or a CU 3 control unit. The Grundfos MS 6 submersible motors can be fitted with a Pt1. The Pt1 is fitted in the motor and connected via a relay (EDM 35 or PR 222), which can be connected to the CU 3 control unit. MMS: For the protection of the Grundfos MMS submersible motors against overtemperature Grundfos offers the Pt1 temperature sensor as an optional extra. The Pt1 is fitted in the motor and connected via a relay (EDM 35 or PR 222), which can be connected to the CU 3 control unit. Protection against upthrust In case of a very small counter pressure in connection with start-up there is a risk that the entire pump body may rise. This is called upthrust. Upthrust may damage both pump and motor. Therefore both Grundfos pumps and motors are protected against upthrust as standard, preventing upthrust from occurring in the critical startup phase. The protection consists of either a built-in stop ring or hydraulic balancing. Built-in cooling chambers In all Grundfos MS submersible motors an efficient cooling is ensured by cooling chambers at the top and at the bottom of the motor, and by an internal circulation of motor liquid. See drawing in right column. As long as the required flow velocity past the motor is maintained (see "Operating conditions" page 4) cooling of the motor will be efficient. Example: MS 4 TM 5698 996 1
Submersible motors SP A, SP Lightning protection The smallest Grundfos submersible motors, i.e. of the type MS 42, are all insulated in order to minimize the risk of motor burnout caused by stroke of lightning. Reduced risk of short-circuit The embedded stator winding in the Grundfos MS submersible motor is hermetically enclosed in stainless steel. The result is high mechanical stability and optimum cooling. Also, this eliminates the risk of shortcircuit of the windings caused by condensed water. Example: MS 4 Shaft seal MS 42 The shaft seal is of the lip seal type characterized by low friction against the rotor shaft. The choice of rubber offers good wear resistance, good elasticity and resistance to particles. The rubber material is approved for use in drinking water. MS 4, MS 6 The choice of material is ceramic/tungsten carbide providing optimum sealing, optimum wear resistance and long life. The spring loaded shaft seal is designed with a large surface and a sand shield. The result is a minimum exchange of pumped and motor liquids and no penetration of particles. MMS rewindable motors The standard shaft seal is a rubber lip type. The shaft seal is replaceable. The material features good wear resistance and resistance to particles. Together with the shaft seal housing, the sand shield forms a labyrinth seal, which during normal operating conditions prevents penetration of sand particles into the shaft seal. On request, motors can be supplied with a SiC/SiC seal, according to DIN 2496. TM 736 21 11
Submersible motors Material specification for MS motors Submersible motors Pos. Part MS 42 1 2 3 4 5 6 Shaft (DIN W.-Nr.) Shaft seal (DIN W.-Nr.) Motor sleeve (DIN W.-Nr.) Motor end shield (DIN W.-Nr.) Radial bearing Axial bearing Rubber parts R-version motor MS 4 MS 6 1.457 1.457 NBR rubber Tungsten carbide/ ceramic 1.431 1.431 Ceramic Ceramic/ carbon NBR rubber 1.431 Ceramic/ tungsten carbide Ceramic/ carbon NBR rubber Pos. Part MS 4 MS 6 1 Shaft (DIN W.-Nr.) 1.4462 2 Shaft seal NBR/ceramic 3 Motor sleeve (DIN W.-Nr.) 1.4539 4 Motor end shield (DIN W.-Nr.) 1.4539 5 Radial bearing Ceramic/ tungsten carbide 6 Thrust bearing Ceramic/carbon Rubber parts NBR Example: MS 4 SP A, SP 1 2 5 3 5 6 4 TM 7865 2196 12
Submersible motors SP A, SP Material specification for MMS motors Submersible rewindable motors Pos. no. 1 Component Bearing housing, upper Cast iron Material DIN W.-Nr. EN-JL14 1a Radial bearing 6"-1" Graphite 12" Stainless steel/nbr 13 Motor sleeve Stainless steel 1.431 14 Shaft Up to 75 kw Stainless steel 1.441 From 75 kw 1.4462 2 Motor cable EPDM 22 Bearing housing, lower Cast iron EN-JL14 28 Diaphragm CR 35 Housing Cast iron EN-JL14 41 Motor end shield Cast iron EN-JL14 54 Shaft seal Rubber lip type 68 Thrust bearing Hardened steel EPDM Example: MMS 1 TM1 4985 4799 13
Performance curves SP 1A p [kpa] H [m] 32 3-57 SP 1A 5 Hz ISO 996 Annex A 28 28-5 26 24 24-42 22 2 2-36 18 16 16-28 14 12 12-21 1-18 8 4 [hp].4.2. 8-14 6-9 4 2..2.4.6.8 1. 1.2 1.4 Q [m³/h]..1.2.3.4 Q [l/s] [kw].4.3.2.1...2.4.6.8 1. 1.2 1.4 Q [m³/h] [%] 4 3 2 1 TM 7271 21Performance curves Technical data Power curvessp 1A 14
Technical data SP 1A Dimensions and weights 11 Rp 1 1/4 Pump type Type Motor Power [kw] C 1x23V Dimensions [mm] B 3x23V 3x4V 1x23V A 3x23V 3x4V Net weight [kg] 1x23V 3x23V 3x4V SP 1A-9 MS 42.37 344 256 226 6 57 11 9 SP 1A-14 MS 42.37 449 256 226 75 675 12 1 SP 1A-18 MS 42.55 533 291 241 824 774 14 12 SP 1A-21 MS 42.55 596 291 241 887 837 14 12 B C 95 SP 1A-28 MS 42.75 743 36 276 149 119 16 15 SP 1A-36 MS 42 1.1 956 346 36 132 1262 25 23 SP 1A-42 MS 42 1.1 182 346 36 1428 1388 27 25 SP 1A-5 MS 42 1.5 125 346 346 1596 1596 3 29 SP 1A-57 MS 42 1.5 1397 346 346 1743 1743 32 32 TM 955 1196 A 11mm=Maximumdiameterofpump inclusive of cable guard and motor. 15
Performance curves SP 2A p [kpa] 56 H [m] 56-9 SP 2A 5 Hz ISO 996 Annex A 52 48 48-75 44 4 4-65 36 32 32-55 -48 28 24 24-4 2-33 16 16-28 -23 12-18 8 8-13 -9 4-6..4.8 1.2 1.6 2. 2.4 2.8 Q [m³/h] [hp].6.4..2.4.6.8 Q [l/s] [kw].5.4.3 [%] 5 4 3.2..2.1...4.8 1.2 1.6 2. 2.4 2.8 Q [m³/h] 2 1 TM 7272 21SP 2A 16
Technical data SP 2A Dimensions and weights 11 Rp 1 1/4 Pump type Type Motor Power [kw] C 1x23V Dimensions [mm] B 3x23V 3x4V 1x23V A 3x23V 3x4V Net weight [kg] 1x23V SP 2A-6 MS 42.37 281 256 226 537 57 1 9 SP 2A-9 MS 42.37 344 256 226 6 57 11 9 3x23V 3x4V SP 2A-13 MS 42.55 428 291 241 719 669 13 11 SP 2A-18 MS 42.75 533 36 276 839 89 15 13 B C 95 A SP 2A-23 MS 42 1.1 638 346 36 984 944 17 16 SP 2A-28 MS 42 1.5 743 346 346 189 189 19 18 SP 2A-33 MS 42 1.5 844 346 346 119 119 2 19 SP 2A-4 MS 4 2.2 14 573 1613 37 SP 2A-4 MS 42 2.2 14 346 1386 27 SP 2A-48 MS 4 2.2 128 573 1781 39 SP 2A-48 MS 42 2.2 128 346 1554 3 SP 2A-55 MS 4 3. 1355 493 1848 38 TM 955 1196 SP 2A-65 MS 4 3. 1565 493 258 41 SP 2A-75 MS 4 4. 1954 573 2527 57 SP 2A-9 MS 4 4. 2269 573 2842 64 11mm=Maximumdiameterofpump inclusive of cable guard and motor. SP 2A-75 and SP 2A-9 are mounted in sleeve for R 1¼ connection and with max. diameter 18 mm. 17
Performance curves SP 3A p [kpa] 36 H [m] 38 36-6 SP 3A 5 Hz ISO 996 Annex A 32 34 32-52 3 28 28-45 26 24 24-39 2 22 2-33 18-29 16 16-25 14-22 12 12-18 1-15 8 8-12 6-9 4 4-6 2..4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 4. Q [m³/h] [hp].12..2.4.6.8 1. 1.2 Q [l/s] [kw].9 [%] 6.8.6 4.4.3 2....4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 4. Q [m³/h] TM 7273 21SP 3A 18
Technical data SP 3A Dimensions and weights B C 11 95 Rp 1 1/4 A TM 955 1196 11mm=Maximumdiameterofpump inclusive of cable guard and motor. Pump type Type Motor Power [kw] C 1x23V Dimensions [mm] B 3x23V 3x4V 1x23V A 3x23V 3x4V Net weight [kg] 1x23V 3x23V 3x4V SP 3A-6 MS 42.37 281 256 226 537 57 1 9 SP 3A-6N MS 4R 2.2 326 573 899 26 SP 3A-6N MS 4R.75 326 398 724 18 SP 3A-9 MS 42.55 344 291 241 635 585 12 1 SP 3A-9N MS 4R 2.2 389 573 962 27 SP 3A-9N MS 4R.75 389 398 787 19 SP 3A-12 MS 42.75 47 36 276 713 683 13 12 SP 3A-12N MS 4R 2.2 452 573 125 28 SP 3A-12N MS 4R.75 452 398 85 2 SP 3A-15 MS 42 1.1 47 346 36 816 776 16 14 SP 3A-15N MS 4R 2.2 515 573 188 29 SP 3A-15N MS 4R 1.1 515 413 928 22 SP 3A-18 MS 42 1.1 533 346 36 879 839 16 15 SP 3A-18N MS 4R 2.2 578 573 1151 3 SP 3A-18N MS 4R 1.1 578 413 991 23 SP 3A-22 MS 42 1.5 617 346 346 963 963 18 17 SP 3A-22N MS 4R 2.2 662 573 1235 31 SP 3A-22N MS 4R 1.5 662 413 175 24 SP 3A-25 MS 42 1.5 68 346 346 126 126 18 18 SP 3A-25N MS 4R 2.2 725 573 1298 32 SP 3A-25N MS 4R 1.5 725 413 1138 25 SP 3A-29 MS 4 2.2 764 573 1337 29 SP 3A-29 MS 42 2.2 764 346 111 2 SP 3A-29N MS 4R 2.2 89 573 453 1382 1262 33 28 SP 3A-33 MS 4 2.2 848 573 1421 3 SP 3A-33 MS 42 2.2 848 346 1194 21 SP 3A-33N MS 4R 2.2 893 573 453 1466 1346 34 29 SP 3A-39 MS 4 3. 119 493 1512 32 SP 3A-39N MS 4R 3. 119 493 1512 32 SP 3A-45 MS 4 3. 1145 493 1638 34 SP 3A-45N MS 4R 3. 1145 493 1638 34 SP 3A-52 MS 4 4. 1292 573 1865 41 SP 3A-52N MS 4R 4. 1292 573 1865 41 SP 3A-6 MS 4 4. 146 573 233 43 SP 3A-6N MS 4R 4. 146 573 233 43 19
Performance curves SP 5A p [kpa] 56 H [m] 56-85 SP 5A 5 Hz ISO 996 Annex A 52 48 48-75 44 4 4-6 36 32 32-52 28-44 24 24-38 2-33 16 16-25 -21 12-17 8 8-12 4-8 -6-4..8 1.6 2.4 3.2 4. 4.8 5.6 6.4 Q [m³/h] [hp].16..4.8 1.2 1.6 Q [l/s] [kw].12 [%] 6.8.8.4 4 2....8 1.6 2.4 3.2 4. 4.8 5.6 6.4 Q [m³/h] TM 7274 21SP 5A 2
Technical data SP 5A Dimensions and weights B C E D Rp 1 1/2 A TM 956 1196 SP 5A-75 and SP 5A-85 are mounted in sleeve for R 1½ connection. Pump type Type Motor Power [kw] C 1x23V B Dimensions [mm] 3x23V 3x4V A 1x23V 3x23V 3x4V D E Net weight [kg] 1x23V 3x23V 3x4V SP 5A-4 MS 42.37 24 256 226 496 466 95 11 1 8 SP 5A-4N MS 4R 2.2 284 573 857 95 11 25 SP 5A-4N MS 4R.75 284 398 682 95 11 17 SP 5A-6 MS 42.55 282 291 241 573 523 95 11 11 1 SP 5A-6N MS 4R 2.2 326 573 899 95 11 26 SP 5A-6N MS 4R.75 326 398 724 95 11 18 SP 5A-8 MS 42.75 324 36 276 63 6 95 11 13 11 SP 5A-8N MS 4R 2.2 368 573 941 95 11 27 SP 5A-8N MS 4R.75 368 398 766 95 11 19 SP 5A-12 MS 42 1.1 48 346 36 754 714 95 11 15 13 SP 5A-12N MS 4R 2.2 452 573 125 95 11 28 SP 5A-12N MS 4R 1.1 452 413 865 95 11 21 SP 5A-17 MS 42 1.5 513 346 346 859 859 95 11 17 16 SP 5A-17N MS 4R 2.2 557 573 113 95 11 29 SP 5A-17N MS 4R 1.5 557 413 97 95 11 22 SP 5A-21 MS 4 2.2 597 573 117 95 11 27 SP 5A-21 MS 42 2.2 597 346 943 95 11 18 SP 5A-21N MS 4R 2.2 641 573 453 1214 194 95 11 3 25 SP 5A-25 MS 4 2.2 681 573 1254 95 11 28 SP 5A-25 MS 42 2.2 681 346 127 95 11 19 SP 5A-25N MS 4R 2.2 725 573 453 1298 1178 95 11 32 27 SP 5A-33 MS 4 3. 849 493 1342 95 11 26 SP 5A-33N MS 4R 3. 893 493 1386 95 11 3 SP 5A-38 MS 4 4. 998 573 1571 95 11 36 SP 5A-38N MS 4R 4. 998 573 1571 95 11 36 SP 5A-44 MS 4 4. 1124 573 1697 95 11 38 SP 5A-44N MS 4R 4. 1124 573 1697 95 11 38 SP 5A-52 MS 4 5.5 1292 673 1965 95 11 46 SP 5A-52N MS 4R 5.5 1292 673 1965 95 11 46 SP 5A-6 MS 4 5.5 146 673 2133 95 11 48 SP 5A-6N MS 4R 5.5 146 673 2133 95 11 48 SP 5A-52 MS 6 5.5 1354 541 1895 138 138 6 SP 5A-52N MS 6R 5.5 1354 541 1895 138 138 6 SP 5A-6 MS 6 5.5 1522 541 263 138 138 63 SP 5A-6N MS 6R 5.5 1522 541 263 138 138 63 SP 5A-75 MS 6 7.5 2146 571 2717 138 14 86 SP 5A-85 MS 6 7.5 2356 571 2927 138 14 92 E = Maximum diameter of pump inclusive of cable guard and motor. 21
Performance curves SP 8A p [kpa] 64 H [m] 68 64-11 SP 8A 5 Hz ISO 996 Annex A 6-1 56 56-91 52 48 48-82 44-73 4 4-66 36-58 32 32-5 28-44 24 24-37 2-3 16 16-25 8 12 8 4-21 -18-15 -12-1 -7-5 1 2 3 4 5 6 7 8 9 1 Q [m³/h] [hp].3..5 1. 1.5 2. 2.5 3. Q [l/s] [kw].24 [%] 6.2.16 4.1.8 2.. 1 2 3 4 5 6 7 8 9 1 Q [m³/h] TM 7275 21SP 8A 22
Technical data SP 8A Dimensions and weights B C E D Rp 2 A TM 957 1196 SP 8A-58(N) to SP 8A-11(N) are mounted in sleeve for R 2 connection. Pump type Type Motor Power [kw] C 1x23V B Dimensions [mm] 3x23V 3x4V A 1x23V 3x23V 3x4V D E Net weight [kg] 1x23V 3x23V 3x4V SP 8A-5 MS 42.75 49 36 276 715 685 95 11 15 13 SP 8A-5N (R) MS 4R 2.2 49 573 982 95 11 27 SP 8A-5N (R) MS 4R.75 49 398 87 95 11 19 SP 8A-7 MS 42 1.1 493 346 36 839 799 95 11 17 16 SP 8A-7N (R) MS 4R 2.2 493 573 166 95 11 28 SP 8A-7N (R) MS 4R 1.1 493 413 96 95 11 21 SP 8A-1 MS 42 1.5 619 346 346 965 965 95 11 19 19 SP 8A-1N (R) MS 4R 2.2 619 573 1192 95 11 3 SP 8A-1N (R) MS 4R 1.5 619 413 132 95 11 23 SP 8A-12 MS 4 2.2 73 573 1276 95 11 3 SP 8A-12 MS 42 2.2 73 346 149 95 11 21 SP 8A-12N (R) MS 4R 2.2 73 573 453 1276 1156 95 11 3 25 SP 8A-15 MS 4 2.2 829 573 142 95 11 32 SP 8A-15 MS 42 2.2 829 346 1175 95 11 23 SP 8A-15N (R) MS 4R 2.2 829 573 453 142 1282 95 11 32 27 SP 8A-18 MS 4 3. 955 493 1448 95 11 29 SP 8A-18N (R) MS 4R 3. 955 493 1448 95 11 29 SP 8A-21 MS 4 4. 181 573 1654 95 11 35 SP 8A-21N (R) MS 4R 4. 181 573 1654 95 11 35 SP 8A-25 MS 4 4. 1249 573 1822 95 11 37 SP 8A-25N (R) MS 4R 4. 1249 573 1822 95 11 37 SP 8A-3 MS 4 5.5 1459 673 2132 95 11 45 SP 8A-3N (R) MS 4R 5.5 1459 673 2132 95 11 45 SP 8A-37 MS 4 5.5 1753 673 2426 95 11 49 SP 8A-37N (R) MS 4R 5.5 1753 673 2426 95 11 49 SP 8A-3 MS 6 5.5 1521 541 262 138 138 56 SP 8A-3N MS 6R 5.5 1521 541 262 138 138 56 SP 8A-37 MS 6 5.5 1815 541 2356 138 138 6 SP 8A-37N MS 6R 5.5 1815 541 2356 138 138 6 SP 8A-44 MS 4 7.5 251 773 2824 95 11 6 SP 8A-44N MS 4 7.5 251 773 2824 95 11 6 SP 8A-44 MS 6 7.5 219 571 268 138 138 66 SP 8A-44N MS 6R 7.5 219 571 268 138 138 66 SP 8A-5 MS 4 7.5 233 773 376 95 11 64 SP 8A-5N MS 4 7.5 233 773 376 95 11 64 SP 8A-5 MS 6 7.5 2361 571 2932 138 138 7 SP 8A-5N MS 6R 7.5 2361 571 2932 138 138 7 SP 8A-58 MS 6 9.2 313 61 3614 138 14 14 SP 8A-58N MS 6R 9.2 313 61 3614 138 14 14 SP 8A-66 MS 6 11. 3349 631 398 138 14 114 SP 8A-66N MS 6R 11. 3349 631 398 138 14 114 SP 8A-73 MS 6 11. 3643 631 4274 138 14 12 SP 8A-73N MS 6R 11. 3643 631 4274 138 14 12 SP 8A-82 MS 6 13. 421 661 4682 138 14 131 SP 8A-82N MS 6R 13. 421 661 4682 138 14 131 SP 8A-91 MS 6 15. 4399 696 595 138 14 143 SP 8A-91N MS 6R 15. 4399 696 595 138 14 143 SP 8A-1 MS 6 15. 4777 696 5473 138 14 15 SP 8A-1N MS 6R 15. 4777 696 5473 138 14 15 SP 8A-11 MS 6 18.5 5197 751 5948 138 14 164 SP 8A-11N MS 6R 18.5 5197 751 5948 138 14 164 E = Maximum diameter of pump inclusive of cable guard and motor. 23
Performance curves SP 14A p [kpa] 16 H [m] 17 16-25 SP 14A 5 Hz ISO 996 Annex A 15 14 14 13 12 12-18 11 1 1 9-13 8 8 7-1 6 6 5-7 4 4-5 3 2 2 1 2 4 6 8 1 12 14 16 18 Q [m³/h] [hp].4.2. 1 2 3 4 5 Q [l/s] [kw].3.2.1. 2 4 6 8 1 12 14 16 18 Q [m³/h] [%] 6 4 2 TM 7276 21SP 14A 24
Technical data SP 14A Dimensions and weights B C E D Rp 2 A TM 957 1196 Motor Dimensions [mm] Net weight [kg] Pump type B A Power Type C D E [kw] 3x23V 3x23V 3x23V 1x23V 1x23V 1x23V 3x4V 3x4V 3x4V SP 14A-5 MS 42 1.5 51 346 346 856 856 95 11 18 17 SP 14A-7 MS 4 2.2 64 573 1213 95 11 29 SP 14A-7 MS 42 2.2 64 346 986 95 11 19 SP 14A-1 MS 4 3. 835 493 1328 95 11 27 SP 14A-13 MS 4 4. 13 573 163 95 11 33 SP 14A-18 MS 4 5.5 1355 673 228 95 11 41 SP 14A-25 MS 4 7.5 181 773 2584 95 11 67 SP 14A-18 MS 6 5.5 1417 541 1958 138 138 52 SP 14A-25 MS 6 7.5 1872 571 2443 138 138 6 E = Maximum diameter of pump inclusive of cable guard and motor. 25
Performance curves SP 17 p [kpa] 18 H [m] 19 18-17 -16 SP 17 5 Hz ISO 996 Annex A 17-15 16 16-14 14 15 14-13 -12 12 13 12 11-11 -1 1 1-9 9-8 8 8-7 7-6 6 6-5 5-4 4 4-3 2 3 2 1-2 -1 2 4 6 8 1 12 14 16 18 2 Q [m³/h] p [kpa] 8 6 H [m] 8 6 1 2 3 4 5 6 Q [l/s] [%] 8 6 4 2 4 2 NPSH 2 4 6 8 1 12 14 16 18 2 Q [m³/h] 4 2 TM1 8757 21SP 17 26
Performance curves SP 17 p [kpa] 52 48 H [m] 52 5 48-48 -45-43 SP 17 5 Hz ISO 996 Annex A 44 4 36 32 46 44 42 4 38 36 34 32-4 -39-38 -37-36 -35-34 -33-32 -31-3 -29-28 28 24 2 3 28 26 24 22 2-27 -26-25 -24-23 -22-21 -2-19 -18 18 16 16 14 12 12 1 8 8 2 4 6 8 1 12 14 16 18 2 Q [m³/h] p [kpa] 8 6 H [m] 8 6 1 2 3 4 5 6 Q [l/s] [%] 8 6 4 2 4 2 NPSH 4 2 2 4 6 8 1 12 14 16 18 2 Q [m³/h] TM1 8758 21 27
Technical data SP 17 Dimensions and weights B C E D Rp 2 1/2 A TM1 2435 1798 SP 17-43 to SP 17-48 are mounted in sleeve for R 3 connection. Pump type Type Motor Power [kw] C 1x23V B Dimensions [mm] 3x23V 3x4V A 1x23V 3x23V 3x4V D E* E** Net weight [kg] 1x23V 3x23V 3x4V SP 17-1 MS 42.55 314 291 241 65 555 95 131 13 11 SP 17-1 N (R) MS 4 R.75 314 398 712 95 131 17 SP 17-1 N (R) MS 4 R 2.2 314 573 887 95 131 26 SP 17-2 MS 42 1.1 374 346 36 72 68 95 131 17 15 SP 17-2 N (R) MS 4 R 1.1 374 413 787 95 131 2 SP 17-2 N (R) MS 4 R 2.2 374 573 947 95 131 27 SP 17-3 MS 42 2.2 435 346 781 95 131 19 SP 17-3 N (R) MS 4 R 2.2 435 573 453 18 888 95 131 28 23 SP 17-4 MS 42 2.2 495 346 841 95 131 2 SP 17-4 MS 4 2.2 495 573 453 168 948 95 131 29 24 SP 17-5 MS 4 3. 556 494 15 95 131 26 SP 17-6 MS 4 4. 616 574 119 95 131 31 SP 17-7 MS 4 4. 677 574 1251 95 131 33 SP 17-8 MS 4 5.5 737 674 1411 95 131 39 SP 17-9 MS 4 5.5 798 674 1472 95 131 4 SP 17-1 MS 4 5.5 858 773 1631 95 131 41 SP 17-11 MS 4 7.5 919 773 1692 95 131 47 SP 17-12 MS 4 7.5 979 773 1752 95 131 49 SP 17-13 MS 4 7.5 14 773 1813 95 131 5 SP 17-8 MS 6 5.5 753 544 1297 138 142 142 5 SP 17-9 MS 6 5.5 814 544 1358 138 142 142 51 SP 17-1 MS 6 5.5 874 544 1418 138 142 142 53 SP 17-11 MS 6 7.5 935 574 159 138 142 142 55 SP 17-12 MS 6 7.5 995 574 1569 138 142 142 56 SP 17-13 MS 6 7.5 156 574 163 138 142 142 57 SP 17-14 MS 6 9.2 1116 64 172 138 142 142 64 SP 17-15 MS 6 9.2 1177 64 1781 138 142 142 65 SP 17-16 MS 6 9.2 1237 64 1841 138 142 142 66 SP 17-17 MS 6 9.2 1298 64 192 138 142 142 67 SP 17-18 MS 6 11 1358 634 1992 138 142 142 72 SP 17-19 MS 6 11 1419 634 253 138 142 142 73 SP 17-2 MS 6 11 1479 634 2113 138 142 142 74 SP 17-21 MS 6 13 154 664 224 138 142 142 78 SP 17-22 MS 6 13 16 664 2264 138 142 142 79 SP 17-23 MS 6 13 1661 664 2325 138 142 142 81 SP 17-24 MS 6 13 1721 664 2385 138 142 142 82 SP 17-25 MS 6 15 1782 699 2481 138 142 142 87 SP 17-26 MS 6 15 1842 699 2541 138 142 142 88 SP 17-27 MS 6 15 193 699 262 138 142 142 89 SP 17-28 MS 6 18.5 1963 754 2717 138 142 142 96 SP 17-29 MS 6 18.5 224 754 2778 138 142 142 97 SP 17-3 MS 6 18.5 284 754 2838 138 142 142 99 SP 17-31 MS 6 18.5 2145 754 2899 138 142 142 1 SP 17-32 MS 6 18.5 225 754 2959 138 142 142 11 SP 17-33 MS 6 18.5 2266 754 32 138 142 142 12 SP 17-34 MS 6 22 2326 814 314 138 142 142 19 SP 17-35 MS 6 22 2387 814 321 138 142 142 111 SP 17-36 MS 6 22 2447 814 3261 138 142 142 112 SP 17-37 MS 6 22 258 814 3322 138 142 142 113 SP 17-38 MS 6 22 2568 814 3382 138 142 142 114 SP 17-39 MS 6 22 2629 814 3443 138 142 142 115 SP 17-4 MS 6 22 2689 814 353 138 142 142 117 SP 17-43 MS 6 26 3118 874 3992 138 175 181 164 SP 17-45 MS 6 26 3239 874 4113 138 175 181 167 SP 17-48 MS 6 26 342 874 4294 138 175 181 172 * Maximum diameter of pump with one motor cable. ** Maximum diameter of pump with two motor cables. SP 17-1 to SP 17-48 are also available in N and R versions with motors in R version. Dimensions as above. Other types of connection are possible by means of connecting flanges, see page 85 28
Power curves SP 17 [hp] 13 12 11 1 9 [kw] 1. 9.6 9.2 8.8 8.4 8. 7.6 7.2 6.8 6.4 SP 17 5 Hz ISO 996 Annex A -17-16 -15-14 -13-12 8 7 6. 5.6 5.2 4.8-11 -1-9 6 4.4-8 5 4 3 2 1 4. 3.6 3.2 2.8 2.4 2. 1.6 1.2.8.4-7 -6-5 -4-3 -2-1. 2 4 6 8 1 12 14 16 18 2 Q [m³/h] 1 2 3 4 5 6 Q [l/s] TM1 8759 21 29
Power curves SP 17 [hp] 38 36 34 32 [kw] 28 27 26 25 24 23 SP 17 5 Hz ISO 996 Annex A -48-45 -43 3 28 26 24 22 2 18 16 14 12 1 22 21 2 19 18 17 16 15 14 13 12 11 1 9 8 7-4 -39-38 -37-36 -35-34 -33-32 -31-3 -29-28 -27-26 -25-24 -23-22 -21-2 -19-18 8 6 5 2 4 6 8 1 12 14 16 18 2 Q [m³/h] 1 2 3 4 5 6 Q [l/s] TM1 876 21 3
Performance curves SP 3 p [kpa] 16 H [m] 17 16-15 -14 SP 3 5 Hz ISO 996 Annex A 15-13 14 14-12 13-11 12 12-1 1 11 1-9 9-8 8 8-7 7-6 6 6-5 5-4 4 4-3 3-2 2 2 1-1 4 8 12 16 2 24 28 32 36 Q [m³/h] p [kpa] 8 6 H [m] 8 6 2 4 6 8 1 Q [l/s] [%] 8 6 4 4 4 2 2 NPSH 4 8 12 16 2 24 28 32 36 Q [m³/h] 2 TM1 8761 21SP 3 31
Performance curves SP 3 p [kpa] 56 52 H [m] 56 54 52-46 -49 SP 3 5 Hz ISO 996 Annex A 48 5 48-43 44 46 44-39 4 36 32 28 24 2 42 4 38 36 34 32 3 28 26 24 22 2 18-34 -32-3 -28-26 -24-22 -2-18 -16-35 -33-31 -29-27 -25-23 -21-19 -17 16 16 14 12 12 1 8 8 6 4 8 12 16 2 24 28 32 36 Q [m³/h] p [kpa] 8 6 4 H [m] 8 6 4 2 4 6 8 1 Q [l/s] [%] 8 6 4 2 2 NPSH 2 4 8 12 16 2 24 28 32 36 Q [m³/h] TM1 8762 21 32
Technical data SP 3 Dimensions and weights B C E D Rp 3 A TM 96 1196 SP 3-39 to SP 3-49 are mounted in sleeve for R 3 connection. Pump type Type Motor Power [kw] C 1x23V B Dimensions [mm] 3x23V 3x4V A 1x23V 3x23V 3x4V D E* E** Net weight [kg] 1x23V 3x23V 3x4V SP 3-1 MS 42 1.1 349 346 36 695 655 95 131 16 14 SP 3-1 N (R) MS 4 R 2.2 349 573 922 95 131 26 SP 3-2 MS 42 2.2 445 346 791 95 131 19 SP 3-2 N (R) MS 4 R 2.2 445 573 453 118 898 95 131 28 23 SP 3-3 MS 4 3. 541 494 135 95 131 25 SP 3-4 MS 4 4. 637 574 1211 95 131 31 SP 3-5 MS 4 5.5 733 674 147 95 131 38 SP 3-6 MS 4 5.5 829 674 153 95 131 39 SP 3-7 MS 4 7.5 925 773 1698 95 131 46 SP 3-8 MS 4 7.5 121 773 1794 95 131 48 SP 3-5 MS 6 5.5 749 544 1293 138 142 142 49 SP 3-6 MS 6 5.5 845 544 1389 138 142 142 51 SP 3-7 MS 6 7.5 941 574 1515 138 142 142 53 SP 3-8 MS 6 7.5 137 574 1611 138 142 142 55 SP 3-9 MS 6 9.2 1133 64 1737 138 142 142 62 SP 3-1 MS 6 9.2 1229 64 1833 138 142 142 64 SP 3-11 MS 6 9.2 1325 64 1929 138 142 142 65 SP 3-12 MS 6 11 1421 634 255 138 142 142 7 SP 3-13 MS 6 11 1517 634 2151 138 142 142 72 SP 3-14 MS 6 13 1613 664 2277 138 142 142 76 SP 3-15 MS 6 13 179 664 2373 138 142 142 78 SP 3-16 MS 6 15 185 699 254 138 142 142 84 SP 3-17 MS 6 15 191 699 26 138 142 142 85 SP 3-18 MS 6 18.5 1997 754 2751 138 142 142 93 SP 3-19 MS 6 18.5 293 754 2847 138 142 142 94 SP 3-2 MS 6 18.5 2189 754 2943 138 142 142 96 SP 3-21 MS 6 18.5 2285 754 339 138 142 142 98 SP 3-22 MS 6 22 2381 814 3195 138 142 142 15 SP 3-23 MS 6 22 2477 814 3291 138 142 142 17 SP 3-24 MS 6 22 2573 814 3387 138 142 142 19 SP 3-25 MS 6 22 2669 814 3483 138 142 142 11 SP 3-26 MS 6 22 2765 814 3579 138 142 142 112 SP 3-27 MS 6 26 2861 874 3735 138 142 142 119 SP 3-28 MS 6 26 2957 874 3831 138 142 142 121 SP 3-29 MS 6 26 353 874 3927 138 142 142 123 SP 3-3 MS 6 26 3149 874 423 138 142 142 124 SP 3-31 MS 6 26 3245 874 4119 138 142 142 126 SP 3-32 MS 6 3 3341 944 4285 138 144 145 136 SP 3-33 MS 6 3 3437 944 4381 138 144 145 137 SP 3-34 MS 6 3 3533 944 4477 138 144 145 139 SP 3-35 MS 6 3 3629 944 4573 138 144 145 141 SP 3-39 MMS 6 37 426 1425 5685 144 175 181 253 SP 3-43 MMS 6 37 4644 1425 669 144 175 181 264 SP 3-46 MMS 8 45 4881 127 6151 192 175 181 325 SP 3-49 MMS 8 45 5169 127 6439 192 175 181 332 * Maximum diameter of pump with one motor cable. ** Maximum diameter of pump with two motor cables. SP3-1toSP3-35arealsoavailableinNandRversionswithmotorsinRversion. Dimensions as above. Other types of connection are possible by means of connecting pieces, see page 85. 33
Power curves SP 3 [hp] 18 16 [kw] 13.6 12.8 12. 11.2 SP 3 5 Hz ISO 996 Annex A -15-14 14 1.4 9.6-13 -12 12 1 8 8.8 8. 7.2 6.4 5.6-11 -1-9 -8-7 6 4.8 4. -6-5 4 3.2 2.4-4 -3 2 1.6-2.8-1. 4 8 12 16 2 24 28 32 36 Q [m³/h] 2 4 6 8 1 Q [l/s] TM1 8763 21 34
Power curves SP 3 [hp] 6 56 [kw] 46 44 42 4 SP 3 5 Hz ISO 996 Annex A -49-46 52 38 48 44 36 34 32-43 -39 4 36 32 28 24 2 16 3 28 26 24 22 2 18 16 14 12-35 -34-33 -32-31 -3-29 -28-27 -26-25 -24-23 -22-21 -2-19 -18-17 -16 12 1 8 6 4 8 12 16 2 24 28 32 36 Q [m³/h] 2 4 6 8 1 Q [l/s] TM1 8764 21 35
Performance curves SP 46 p [kpa] H [m] SP 46 2 2-15 5 Hz ISO 996 Annex A -14 18-13 16 16-12 -11 14-1 12 12-9 -9-C -8 1-8-C -7 8 8-6 -5 6-4 4 4-4-C -3-3-C -2 2-2-BB -1-1-B 1 2 3 4 5 6 Q [m³/h] p [kpa] 8 6 H [m] 8 6 5 1 15 Q [l/s] [%] 8 6 4 4 4 2 2 NPSH 1 2 3 4 5 6 Q [m³/h] 2 TM1 8765 24SP 46 36
Performance curves SP 46 p [kpa] H [m] SP 46 44-33 5 Hz ISO 996 Annex A 4 4-3 -28 36-26 32 32-24 -23-22 28-21 -2 24 24-19 -18-17 -16 2 16 16 12 8 8 4 1 2 3 4 5 6 Q [m³/h] p [kpa] 8 6 H [m] 8 6 5 1 15 Q [l/s] [%] 8 6 4 4 4 2 2 NPSH 2 1 2 3 4 5 6 Q [m³/h] TM1 8766 24 37
Technical data SP 46 Dimensions and weights B C E D A Rp 3 Rp 4 SP 46-26 to SP 46-33 are mounted in sleeve for R 4 connection. TM 961 1196 Pump type Motor Dimensions [mm] Net Power Rp 3 connection Rp 4 connection weight Type B D [kw] [kg] A C E* E** A C E* E** SP 46-1-B MS 4 1.1 777 364 141 783 37 145 413 95 2 SP 46-1 MS 4 2.2 817 364 141 823 37 145 453 95 22 SP 46-2-BB MS 4 2.2 93 477 141 936 483 145 453 95 24 SP 46-2 MS 4 3. 97 477 141 976 483 145 493 95 25 SP 46-3-C MS 4 4. 1163 59 141 1169 596 145 573 95 32 SP 46-3 MS 4 5.5 1263 59 141 1269 596 145 673 95 37 SP 46-4-C MS 4 5.5 1376 73 141 1382 79 145 673 95 39 SP 46-4 MS 4 7.5 1476 73 141 1482 79 145 773 95 44 SP 46-5 MS 4 7.5 1589 816 141 1595 822 145 773 95 47 SP 46-3 MS 6 5.5 115 66 145 15 1156 612 147 152 544 138 48 SP 46-4 MS 6 7.5 1293 719 145 15 1299 725 147 152 574 138 52 SP 46-5 MS 6 7.5 146 832 145 15 1412 838 147 152 574 138 54 SP 46-6 MS 6 9.2 1549 945 145 15 1555 951 147 152 64 138 62 SP 46-7 MS 6 11 1692 158 145 15 1698 164 147 152 634 138 68 SP 46-8-C MS 6 11 185 1171 145 15 1811 1177 147 152 634 138 7 SP 46-8 MS 6 13 1835 1171 145 15 1841 1177 147 152 664 138 73 SP 46-9-C MS 6 13 1948 1284 145 15 1954 129 147 152 664 138 76 SP 46-9 MS 6 15 1983 1284 145 15 1989 129 147 152 699 138 8 SP 46-1 MS 6 15 296 1397 145 15 212 143 147 152 699 138 82 SP 46-11 MS 6 18.5 2264 151 145 15 227 1516 147 152 754 138 9 SP 46-12 MS 6 18.5 2377 1623 145 15 2383 1629 147 152 754 138 93 SP 46-13 MS 6 22 255 1736 145 15 2556 1742 147 152 814 138 11 SP 46-14 MS 6 22 2663 1849 145 15 2669 1855 147 152 814 138 14 SP 46-15 MS 6 22 2776 1962 145 15 2782 1968 147 152 814 138 16 SP 46-16 MS 6 26 2949 275 145 15 2955 281 147 152 874 138 114 SP 46-17 MS 6 26 362 2188 145 15 368 2194 147 152 874 138 117 SP 46-18 MS 6 3 3245 231 145 15 3251 237 147 152 944 138 128 SP 46-19 MS 6 3 3358 2414 145 15 3364 242 147 152 944 138 13 SP 46-2 MS 6 3 3551 267 145 15 3557 2613 147 152 944 138 132 SP 46-21 MMS 6 37 4145 272 145 15 4151 2726 147 152 1425 144 185 SP 46-22 MMS 6 37 4258 2833 145 15 4264 2839 147 152 1425 144 188 SP 46-23 MMS 6 37 4371 2946 145 15 4377 2952 147 152 1425 144 19 SP 46-24 MMS 6 37 4484 359 145 15 449 365 147 152 1425 144 193 SP 46-26 MMS 8 45 4673 343 192 192 127 192 278 SP 46-28 MMS 8 45 4899 3629 192 192 127 192 284 SP 46-3 MMS 8 45 5125 3855 192 192 127 192 29 SP 46-33 MMS 8 55 5544 4194 192 192 135 192 314 * Maximum diameter of pump with one motor cable. ** Maximum diameter of pump with two motor cables. AllpumpsarealsoavailableinNversionwithmotorsupto3kWinRversion. Dimensions as above. SP 46-1 to SP 46-2 are also available in R version with motors in R version. Dimensions as above. Other types of connection are possible by means of connecting pieces, see page 85. 38
Power curves SP 46 [hp] [kw] 22 SP 46 5 Hz ISO 996 Annex A 28 2-15 -14 24 18-13 2 16 14-12 -11-1 16 12 1-9 -9-C -8-8-C -7 12 8-6 -5 8 4 6 4-4 -4-C -3-3-C -2 2-2-BB -1-1-B 1 2 3 4 5 6 Q [m³/h] 5 1 15 Q [l/s] TM1 8767 24 39
Power curves SP 46 [hp] 7 [kw] 52 5 SP 46 5 Hz ISO 996 Annex A 65 48 46-33 6 44 42-3 55 4-28 5 38 36-26 45 4 35 3 34 32 3 28 26 24 22-24 -23-22 -21-2 -19-18 -17-16 2 25 18 2 16 14 1 2 3 4 5 6 Q [m³/h] 5 1 15 Q [l/s] TM1 8768 24 4
Performance curves SP 6 p [kpa] 14 H [m] 14-1 SP 6 5 Hz ISO 996 Annex A 13-9 12 12-9-B -8 11-8-B 1 1-7 9-6 8 8 7-5 6 6-4 5 4 4-3 3-2 2 2-2-B -1 1-1-A 1 2 3 4 5 6 7 8 Q [m³/h] p [kpa] 8 6 H [m] 8 6 5 1 15 2 Q [l/s] [%] 8 6 4 2 4 2 NPSH 1 2 3 4 5 6 7 8 Q [m³/h] 4 2 TM1 8826 24SP 6 41
Performance curves SP 6 p [kpa] H [m] 32-22 SP 6 5 Hz ISO 996 Annex A 3-21 28 28-2 -19 26-18 24 24-17 -16 22-15 2 2-14 -13 18-12 16 16-11 14 12 12 1 8 8 6 4 4 1 2 3 4 5 6 7 8 Q [m³/h] p [kpa] 8 6 H [m] 8 6 5 1 15 2 Q [l/s] [%] 8 6 4 2 4 2 NPSH 4 2 1 2 3 4 5 6 7 8 Q [m³/h] TM1 8827 24 42
Technical data SP 6 Dimensions and weights B C E D A Rp 3 Rp 4 TM 961 1196 Pump type Motor Dimensions [mm] Net Power Rp 3 connection Rp 4 connection weight Type B D [kw] [kg] A C E* E** A C E* E** SP 6-1-A MS 4 1.5 78 364 142 786 37 146 416 95 2 SP 6-1 MS 4 2.2 817 364 142 823 37 146 453 95 22 SP 6-2-B MS 4 3. 97 477 142 976 483 146 493 95 25 SP 6-2 MS 4 4. 15 477 142 156 483 146 573 95 29 SP 6-3 MS 4 5.5 1263 59 142 1269 596 146 673 95 37 SP 6-3 MS 6 5.5 1134 59 147 15 114 596 149 152 544 138 47 SP 6-4 MS 4 7.5 1492 719 142 1482 79 146 773 95 44 SP 6-4 MS 6 7.5 1293 719 147 15 1283 79 149 152 574 138 5 SP 6-5 MS 6 9.2 1436 832 147 15 1442 838 149 152 64 138 6 SP 6-6 MS 6 11 1584 95 147 15 1585 951 149 152 634 138 65 SP 6-7 MS 6 13 1722 158 147 15 1728 164 149 152 664 138 71 SP 6-8-B MS 6 13 1835 1171 147 15 1841 1177 149 152 664 138 73 SP 6-8 MS 6 15 187 1171 147 15 1876 1177 149 152 699 138 77 SP 6-9-B MS 6 15 1983 1284 147 15 1989 129 149 152 699 138 8 SP 6-9 MS 6 18.5 238 1284 147 15 244 129 149 152 754 138 85 SP 6-1 MS 6 18.5 2151 1397 147 15 2157 143 149 152 754 138 88 SP 6-11 MS 6 22 2324 151 147 15 233 1516 149 152 814 138 96 SP 6-12 MS 6 22 2437 1623 147 15 2443 1629 149 152 814 138 99 SP 6-13 MS 6 26 261 1736 147 15 2616 1742 149 152 874 138 17 SP 6-14 MS 6 26 2723 1849 147 15 2729 1855 149 152 874 138 19 SP 6-15 MS 6 26 2836 1962 147 15 2842 1968 149 152 874 138 112 SP 6-16 MS 6 3 319 275 147 15 325 281 149 152 944 138 122 SP 6-17 MS 6 3 3132 2188 147 15 3138 2194 152 156 944 138 125 SP 6-18 MMS 6 37 386 2381 15 154 3812 2387 152 156 1425 144 178 SP 6-19 MMS 6 37 3919 2494 15 154 3925 25 152 156 1425 144 18 SP 6-2 MMS 6 37 432 267 15 154 438 2613 152 156 1425 144 183 SP 6-21 MMS 6 37 4147 2722 15 154 4151 2726 152 156 1425 144 185 SP 6-22 MMS 8 45 454 2784 18 18 458 2788 18 18 127 192 239 * Maximum diameter of pump with one motor cable. ** Maximum diameter of pump with two motor cables. AllpumpsarealsoavailableinNversionwithmotorsupto3kWinRversion. Dimensions as above. SP 6-1 to SP 6-17 are also available in R version with motors in R version. Dimensions as above. Other types of connection are possible by means of connecting pieces, see page 85. 43
Power curves SP 6 [hp] 24 [kw] 18 17 SP 6 5 Hz ISO 996 Annex A 16-1 2 15 14 13-9 -9-B -8 16 12 11-8-B -7 12 1 9-6 8-5 8 7 6-4 5-3 4 4 3-2 -2-B 2 1-1-A -1 1 2 3 4 5 6 7 8 Q [m³/h] 5 1 15 2 Q [l/s] TM1 8828 24 44
Power curves SP 6 [hp] 52 [kw] 4 39 38 SP 6 5 Hz ISO 996 Annex A 48 37 36 35-22 34 44 4 33 32 31 3 29 28-21 -2-19 -18 36 27 26 25-17 -16 32 24 23 22-15 -14 28 21 2-13 19-12 24 18 17-11 16 15 1 2 3 4 5 6 7 8 Q [m³/h] 5 1 15 2 Q [l/s] TM1 8829 24 45
Performance curves SP 77 p [kpa] H [m] 18-9 SP 77 5 Hz 17 ISO 996 Annex A 16 16-8 15-8-B 14 14-7 13 12 12-6 11 1 1-5 9 8 8-4 -4-B 7 6 6-3 -3-B 5 4 4-2 -2-B 3 2 2-1 1 1 2 3 4 5 6 7 8 9 Q [m³/h] p [kpa] 8 6 H [m] 8 6 5 1 15 2 25 Q [l/s] [%] 8 6 4 4 4 2 2 NPSH 1 2 3 4 5 6 7 8 9 Q [m³/h] 2 TM1 8769 24SP 77 46
Performance curves SP 77 p [kpa] H [m] 4 38-2 -19 SP 77 5 Hz ISO 996 Annex A 36 36-18 34-17 32 32-16 3-15 28 28-14 -13 26 24 24-12 22-11 2 2-1 18 16 16 14 12 12 1 8 8 6 1 2 3 4 5 6 7 8 9 Q [m³/h] p [kpa] 8 6 H [m] 8 6 5 1 15 2 25 Q [l/s] [%] 8 6 4 4 4 2 2 NPSH 2 1 2 3 4 5 6 7 8 9 Q [m³/h] TM1 877 24 47
Technical data SP 77 Dimensions and weights B C E D A 8 x ø15 Rp 5 ø125 ø175 ø2 TM 7872 2196 TM 7323 1798 Pump type Motor Dimensions [mm] Net Power Rp 5 connection 5" Grundfos flange weight Type B D [kw] [kg] A C E* E** A C E* E** SP 77-1 MS 6 5.5 1162 618 178 186 1162 618 2 2 544 138 55 SP 77-2-B MS 6 5.5 129 746 178 186 129 746 2 2 544 138 59 SP 77-2 MS 6 7.5 132 746 178 186 132 746 2 2 574 138 63 SP 77-3-B MS 6 9.2 1478 874 178 186 1478 874 2 2 64 138 72 SP 77-3 MS 6 11 158 874 178 186 158 874 2 2 634 138 75 SP 77-4-B MS 6 13 1667 13 178 186 1667 13 2 2 664 138 82 SP 77-4 MS 6 15 172 13 178 186 172 13 2 2 699 138 86 SP 77-5 MS 6 18.5 1885 1131 178 186 1885 1131 2 2 754 138 95 SP 77-6 MS 6 22 273 1259 178 186 273 1259 2 2 814 138 15 SP 77-7 MS 6 26 2261 1387 178 186 2261 1387 2 2 874 138 114 SP 77-8-B MS 6 26 2389 1515 178 186 2389 1515 2 2 874 138 118 SP 77-8 MS 6 3 2459 1515 178 186 2459 1515 2 2 944 138 126 SP 77-9 MS 6 3 2587 1643 178 186 2587 1643 2 2 944 138 129 SP 77-1 MMS 6 37 3196 1771 178 186 3196 1771 2 2 1425 144 181 SP 77-11 MMS 6 37 3339 1914 178 186 3323 1898 2 2 1425 144 184 SP 77-12 MMS 8 45 3313 243 2 24 3313 243 29 29 127 192 24 SP 77-13 MMS 8 55 3522 2172 2 24 3522 2172 29 29 135 192 259 SP 77-14 MMS 8 55 365 23 2 24 365 23 29 29 135 192 263 SP 77-15 MMS 8 55 3779 2429 2 24 135 192 266 SP 77-16 MMS 8 63 447 2557 2 24 149 192 296 SP 77-17 MMS 8 63 4175 2685 2 24 149 192 3 SP 77-18 MMS 8 63 434 2814 2 24 149 192 34 SP 77-19 MMS 8 75 4532 2942 2 24 159 192 326 SP 77-2 MMS 8 75 466 37 2 24 159 192 33 * Maximum diameter of pump with one motor cable. ** Maximum diameter of pump with two motor cables. AllpumpsarealsoavailableinNversionwithmotorsupto3kWinRversion. Dimensionsasabove. Other types of connection are possible by means of connecting pieces, see page 85. 48
Power curves SP 77 [hp] [kw] 32 SP 77 5 Hz ISO 996 Annex A 4 3 28-9 35 26-8 24-8-B 3 22-7 25 2 18-6 16-5 2 15 14 12 1-4 -4-B -3 1 5 8 6 4-3-B -2-2-B -1 2 1 2 3 4 5 6 7 8 9 Q [m³/h] 5 1 15 2 25 Q [l/s] TM1 8771 24 49
Power curves SP 77 [hp] 1 [kw] 72 SP 77 5 Hz ISO 996 Annex A 9 68-2 64-19 8 6-18 56-17 7 52-16 -15 48-14 6 44-13 4-12 5 36-11 32-1 4 28 24 3 2 1 2 3 4 5 6 7 8 9 Q [m³/h] 5 1 15 2 25 Q [l/s] TM1 8772 24 5
Performance curves SP 95 p [kpa] H [m] 18-9 SP 95 5 Hz ISO 996 Annex A -8 16 16-7 14-6 12 12-5 1-5-AB -4 8 8-4-B -3 6-3-B -3-BB 4 4-2 -2-A 2-2-BB -1 2 4 6 8 1 12 Q [m³/h] p [kpa] 8 6 4 H [m] 8 6 4 1 2 3 Q [l/s] [%] 8 6 4 2 2 NPSH 2 4 6 8 1 12 Q [m³/h] 2 TM1 8773 24SP 95 51
Performance curves SP 95 p [kpa] H [m] -2 SP 95 4 4-19 5 Hz ISO 996 Annex A -18 36-17 -16 32 32-15 -14 28-13 -12 24 24-11 -1 2 16 16 12 8 8 4 2 4 6 8 1 12 Q [m³/h] p [kpa] 8 6 4 H [m] 8 6 4 1 2 3 Q [l/s] [%] 8 6 4 2 2 NPSH 2 2 4 6 8 1 12 Q [m³/h] TM1 8774 24 52
Technical data SP 95 Dimensions and weights B C E D A 8 x ø15 Rp 5 ø125 ø175 ø2 TM 7872 2196 TM 7323 1798 Pump type Motor Dimensions [mm] Net Power Rp 5 connection 5" Grundfos flange weight Type B D [kw] [kg] A C E* E** A C E* E** SP 95-1 MS 6 5.5 1162 618 178 186 1162 618 2 2 544 138 55 SP 95-2-BB MS 6 5.5 129 746 178 186 129 746 2 2 544 138 66 SP 95-2-A MS 6 7.5 132 746 178 186 132 746 2 2 574 138 63 SP 95-2 MS 6 9.2 135 746 178 186 135 746 2 2 64 138 68 SP 95-3-BB MS 6 9.2 1478 874 178 186 1478 874 2 2 64 138 72 SP 95-3-B MS 6 11 158 874 178 186 158 874 2 2 634 138 75 SP 95-3 MS 6 13 1538 874 178 186 1538 874 2 2 664 138 78 SP 95-4-B MS 6 15 172 13 178 186 172 13 2 2 699 138 86 SP 95-4 MS 6 18.5 1757 13 178 186 1757 13 2 2 754 138 91 SP 95-5-AB MS 6 18.5 1885 1131 178 186 1885 1131 2 2 754 138 95 SP 95-5 MS 6 22 1945 1131 178 186 1945 1131 2 2 814 138 11 SP 95-6 MS 6 26 2133 1259 178 186 2133 1259 2 2 874 138 11 SP 95-7 MS 6 3 2331 1387 178 186 2331 1387 2 2 944 138 122 SP 95-8 MMS 6 37 294 1515 178 186 294 1515 2 2 1425 144 173 SP 95-9 MMS 6 37 367 1642 178 186 367 1642 2 2 1425 144 177 SP 95-1 MMS 8 45 355 1785 196 24 355 1785 25 25 127 192 233 SP 95-11 MMS 8 55 3264 1914 196 24 3264 1914 25 25 135 192 251 SP 95-12 MMS 8 55 3393 243 196 24 3393 243 25 25 135 192 255 SP 95-13 MMS 8 55 3522 2172 196 24 3522 2172 25 25 135 192 259 SP 95-14 MMS 8 63 379 23 196 24 379 23 25 25 149 192 289 SP 95-15 MMS 8 75 419 2429 196 24 159 192 311 SP 95-16 MMS 8 75 4147 2557 196 24 159 192 315 SP 95-17 MMS 8 75 4275 2685 196 24 159 192 319 SP 95-18 MMS 8 92 4644 2814 196 24 183 192 369 SP 95-19 MMS 8 92 4772 2942 196 24 183 192 372 SP 95-2 MMS 8 92 49 37 196 24 183 192 376 * Maximum diameter of pump with one motor cable. ** Maximum diameter of pump with two motor cables. AllpumpsarealsoavailableinNversionwithmotorsupto3kWinRversion. Dimensions as above. Other types of connection are possible by means of connecting pieces, see page 85. 53
Power curves SP 95 [hp] [kw] 4 SP 95 5 Hz ISO 996 Annex A 5 36-9 32-8 4 28-7 24-6 3 2-5 2 16-5-AB -4-4-B 12-3 1 8-3-B -3-BB -2-2-A 4-2-BB -1 2 4 6 8 1 12 Q [m³/h] 1 2 3 Q [l/s] TM1 8775 24 54
Power curves SP 95 [hp] 12 [kw] 88 SP 95 5 Hz ISO 996 Annex A 84 11 8-2 1 76 72-19 -18 9 68 64-17 -16 8 6-15 56-14 7 52-13 48-12 6 44-11 4-1 5 36 32 4 28 2 4 6 8 1 12 Q [m³/h] 1 2 3 Q [l/s] TM1 8776 24 55
Performance curves SP 125 p [kpa] 16 H [m] 17 16-6-A -6-AA SP 125 5 Hz ISO 996 Annex A 15-5 14 14-5-A 13-5-AA 12 12-4 11-4-A 1 1-4-AA 9-3 8 8-3-A 7-3-AA 6 6-2 5-2-A 4 4-2-AA 3-1 2 2-1-A 1 2 4 6 8 1 12 14 16Q [m³/h] p [kpa] 8 6 H [m] 8 6 1 2 3 4 Q [l/s] [%] 8 6 4 2 4 2 NPSH 2 4 6 8 1 12 14 16Q [m³/h] 4 2 TM1 8777 24SP 125 56
Performance curves SP 125 p [kpa] H [m] SP 125 3-1 5 Hz ISO 996 Annex A 28 28-1-A -1-AA -9 26-9-A 24 24-9-AA -8-8-A 22-8-AA -7 2 2-7-A -7-AA 18-6 16 16 14 12 12 1 8 8 6 2 4 6 8 1 12 14 16Q [m³/h] p [kpa] 8 6 H [m] 8 6 1 2 3 4 Q [l/s] [%] 8 6 4 4 4 2 2 NPSH 2 2 4 6 8 1 12 14 16Q [m³/h] TM1 8778 24 57
Technical data SP 125 Dimensions and weights B C E D Rp 6 A 8 x ø15 ø17 ø196 ø22 TM 876 3596 TM 7324 1798 Pump type Motor Dimensions [mm] Net Power Rp 6 connection 6" Grundfos flange weight Type B D [kw] [kg] A C E* E** A C E* E** SP 125-1-A MS 6 7.5 1225 651 211 218 1225 651 222 226 574 138 7 SP 125-1 MS 6 11 1285 651 211 218 1285 651 222 226 634 138 79 SP 125-2-AA MS 6 13 1471 87 211 218 1471 87 222 226 664 138 88 SP 125-2-A MS 6 18.5 1561 87 211 218 1561 87 222 226 754 138 97 SP 125-2 MS 6 22 1621 87 211 218 1621 87 222 226 814 138 13 SP 125-3-AA MS 6 22 1777 963 211 218 1777 963 222 226 814 138 19 SP 125-3-A MS 6 26 1837 963 211 218 1837 963 222 226 874 138 115 SP 125-3 MS 6 3 197 963 211 218 197 963 222 226 944 138 123 SP 125-4-AA MMS 6 37 2544 1119 211 218 2544 1119 222 226 1425 144 176 SP 125-4-A MMS 6 37 2544 1119 211 218 2544 1119 222 226 1425 144 176 SP 125-4 MMS 6 37 2544 1119 211 218 2544 1119 222 226 1425 144 176 SP 125-5-AA MMS 8 45 2545 1275 213 218 2545 1275 223 226 127 192 236 SP 125-5-A MMS 8 45 2545 1275 213 218 2545 1275 223 226 127 192 236 SP 125-5 MMS 8 55 2595 1275 213 218 2595 1245 223 226 135 192 251 SP 125-6-AA MMS 8 55 2781 1431 213 218 2781 1431 223 226 135 192 257 SP 125-6-A MMS 8 55 2781 1431 213 218 2781 1431 223 226 135 192 257 SP 125-6 MMS 8 63 2921 1431 218 227 2921 1431 229 232 149 192 283 SP 125-7-AA MMS 8 63 377 1587 218 227 377 1587 229 232 149 192 289 SP 125-7-A MMS 8 63 377 1587 218 227 377 1587 229 232 149 192 289 SP 125-7 MMS 8 75 3177 1587 218 227 3177 1587 229 232 159 192 38 SP 125-8-AA MMS 8 75 3333 1743 218 227 159 192 314 SP 125-8-A MMS 8 75 3333 1743 218 227 159 192 314 SP 125-8 MMS 8 75 3333 1743 218 227 159 192 314 SP 125-9-AA MMS 8 92 3729 1899 218 227 183 192 366 SP 125-9-A MMS 8 92 3729 1899 218 227 183 196 366 SP 125-9 MMS 8 92 3729 1899 218 227 183 196 366 SP 125-1-AA MMS 8 92 3885 255 218 227 183 196 372 SP 125-1-A MMS 8 92 3885 255 218 227 183 196 372 SP 125-1 MMS 8 92 3885 255 218 227 183 196 372 * Maximum diameter of pump with one motor cable. ** Maximum diameter of pump with two motor cables. AllpumpsarealsoavailableinNversionwithmotorsupto3kWinRversion. Dimensionsasabove. Other types of connection are possible by means of connecting pieces, see page 85. 58
Power curves SP 125 [hp] [kw] 56 SP 125 5 Hz ISO 996 Annex A 7 52-6-A 48-6-AA -5 6 44-5-A 4-5-AA 5 36-4 4 32 28-4-A -4-AA -3 3 24 2-3-A -3-AA -2 2 16-2-A 1 12 8-2-AA -1-1-A 4 2 4 6 8 1 12 14 16Q [m³/h] 1 2 3 4 Q [l/s] TM1 8779 24 59
Power curves SP 125 [hp] 13 [kw] 96 SP 125 5 Hz ISO 996 Annex A 92 12 88-1 11 84 8-1-A -1-AA -9 1 76 72-9-A -9-AA -8 9 68 64-8-A -8-AA -7 8 6 56-7-A -7-AA -6 7 52 48 6 44 4 5 36 32 2 4 6 8 1 12 14 16Q [m³/h] 1 2 3 4 Q [l/s] TM1 878 24 6
Performance curves SP 16 p [kpa] 14 H [m] 15 14-5-A -5-AA SP 16 5 Hz ISO 996 Annex A 13-4 12 12-4-A 11-4-AA 1 1-3 9-3-A 8 8-3-AA 7-2 6 6-2-A 5-2-AA 4 4-1 3-1-A 2 2 1 2 4 6 8 1 12 14 16 18 2 Q [m³/h] p [kpa] 16 12 H [m] 16 12 1 2 3 4 5 6 Q [l/s] [%] 8 6 8 4 8 4 NPSH 2 4 6 8 1 12 14 16 18 2 Q [m³/h] 4 2 TM1 8781 24SP 16 61
Performance curves SP 16 p [kpa] H [m] SP 16 28 3 28-9 -9-A 5 Hz ISO 996 Annex A -9-AA 26-8 24 24-8-A -8-AA -7 22-7-A 2 2-7-AA -6-6-A 18-6-AA 16 16-5 14 12 12 1 8 8 6 4 4 2 4 6 8 1 12 14 16 18 2 Q [m³/h] p [kpa] 16 12 8 H [m] 16 12 8 1 2 3 4 5 6 Q [l/s] [%] 8 6 4 4 4 NPSH 2 4 6 8 1 12 14 16 18 2 Q [m³/h] 2 TM1 8782 24 62
Technical data SP 16 Dimensions and weights B C E D Rp 6 A 8 x ø15 ø17 ø196 ø22 TM 876 3596 TM 7324 1798 Pump type Motor Dimensions [mm] Net Power Rp 6 connection 6" Grundfos flange weight Type B D [kw] [kg] A C E* E** A C E* E** SP 16-1-A MS 6 9.2 1255 651 211 218 1255 651 222 226 64 138 76 SP 16-1 MS 6 13 1315 651 211 218 1315 651 222 226 664 138 82 SP 16-2-AA MS 6 18.5 1561 87 211 218 1561 87 222 226 754 138 97 SP 16-2-A MS 6 22 1621 87 211 218 1621 87 222 226 814 138 13 SP 16-2 MS 6 26 1681 87 211 218 1681 87 222 226 874 138 19 SP 16-3-AA MS 6 3 197 963 211 218 197 963 222 226 944 138 123 SP 16-3-A MMS 6 37 2388 963 211 218 2388 963 222 226 1425 144 17 SP 16-3 MMS 6 37 2388 963 211 218 2388 963 222 226 1425 144 17 SP 16-4-AA MMS 8 45 2389 1119 218 227 2389 1119 229 232 127 192 23 SP 16-4-A MMS 8 45 2389 1119 218 227 2389 1119 229 232 127 192 23 SP 16-4 MMS 8 55 2469 1119 218 227 2469 1119 229 232 135 192 245 SP 16-5-AA MMS 8 55 2625 1275 218 227 2625 1275 229 232 135 192 251 SP 16-5-A MMS 8 55 2625 1275 218 227 2625 1275 229 232 135 192 251 SP 16-5 MMS 8 63 2765 1275 218 227 2765 1275 229 232 149 192 277 SP 16-6-AA MMS 8 63 2921 1431 218 227 2921 1431 229 232 149 192 283 SP 16-6-A MMS 8 75 321 1431 218 227 321 1431 229 232 159 192 32 SP 16-6 MMS 8 75 321 1431 218 227 321 1431 229 232 159 192 32 SP 16-7-AA MMS 8 75 3177 1587 218 227 159 192 32 SP 16-7-A MMS 8 92 3417 1587 218 227 183 192 354 SP 16-7 MMS 8 92 3417 1587 218 227 183 192 354 SP 16-8-AA MMS 8 92 3573 1743 218 227 183 192 36 SP 16-8-A MMS 8 92 3573 1743 218 227 183 192 36 SP 16-8 MMS 8 92 3573 1743 218 227 183 192 36 SP 16-9-AA MMS 8 11 3959 1899 218 227 26 192 416 SP 16-9-A MMS 8 11 3959 1899 218 227 26 192 416 SP 16-9 MMS 8 11 3959 1899 218 227 26 192 416 * Maximum diameter of pump with one motor cable. ** Maximum diameter of pump with two motor cables. AllpumpsarealsoavailableinNversionwithmotorsupto3kWinRversion. Dimensions as above. Other types of connection are possible by means of connecting pieces, see page 85. 63
Power curves SP 16 [hp] 8 [kw] 6 SP 16 5 Hz ISO 996 Annex A 56 7 52 48-5-A -5-AA -4 6 44-4-A 5 4 4 36 32 28-4-AA -3-3-A -3-AA 3 24 2-2 -2-A 2 16 12-2-AA -1 1 8-1-A 4 2 4 6 8 1 12 14 16 18 2 Q [m³/h] 1 2 3 4 5 6 Q [l/s] TM1 8783 24 64
Power curves SP 16 [hp] 14 [kw] 18 14 SP 16 5 Hz ISO 996 Annex A 1-9 13 96-9-A 92-9-AA 12 88-8 84-8-A 11 1 8 76 72-8-AA -7-7-A -7-AA 9 68 64-6 -6-A 8 6 56-6-AA -5 7 52 48 6 44 4 2 4 6 8 1 12 14 16 18 2 Q [m³/h] 1 2 3 4 5 6 Q [l/s] TM1 8784 24 65
Performance curves SP 215 p [kpa] 24 H [m] 24-6 SP 215 5 Hz ISO 996 Annex A 22-6-A -6-AA 2 2-5 -5-A 18-5-AA 16 16-4 -4-A 14-4-AA 12 12-3 -3-A 1-3-AA 8 8-2 -2-A 6-2-AA 4 4-1 -1-A 2 4 8 12 16 2 24 28 Q [m³/h] p [kpa] 16 12 H [m] 16 12 2 4 6 8 Q [l/s] [%] 8 6 8 4 8 4 NPSH 4 8 12 16 2 24 28 Q [m³/h] 4 2 TM1 8785 24SP 215 66
Performance curves SP 215 p [kpa] H [m] 4 38-1 -1-A -1-AA SP 215 5 Hz ISO 996 Annex A 36 36-9 -9-A 34-9-AA 32 32-8 -8-A 3-8-AA 28 28-7 -7-A 26-7-AA 24 24 22 2 2 18 16 16 14 12 12 1 8 8 4 8 12 16 2 24 28 Q [m³/h] p [kpa] 16 12 8 H [m] 16 12 8 2 4 6 8 Q [l/s] [%] 8 6 4 4 4 NPSH 2 4 8 12 16 2 24 28 Q [m³/h] TM1 8786 24 67
Technical data SP 215 Dimensions and weights B C E D Rp 6 A 8 x ø15 ø17 ø196 ø22 TM 876 3596 TM 7324 1798 Pump type Motor Dimensions [mm] Net Power Rp 6 connection 6" Grundfos flange weight Type B D [kw] [kg] A C E* E** A C E* E** SP 215-1-A MS 6 15 1489 79 241 247 1489 79 241 247 699 138 92 SP 215-A MS 6 18.5 1544 79 241 247 1544 79 241 247 754 138 97 SP 215-2-AA MS 6 3 191 966 241 247 191 966 241 247 944 138 127 SP 215-2-A MMS 6 37 2126 966 241 247 2126 966 241 247 116 144 174 SP 215-2 MMS 8 45 2236 966 241 247 2236 966 241 247 127 192 228 SP 215-3-AA MMS 8 55 2492 1142 241 247 2492 1142 241 247 135 192 253 SP 215-3-A MMS 8 55 2492 1142 241 247 2492 1142 241 247 135 192 253 SP 215-3 MMS 8 63 2632 1142 241 247 2632 1142 241 247 149 192 279 SP 215-4-AA MMS 8 75 298 1318 241 247 298 1318 241 247 159 192 38 SP 215-4-A MMS 8 75 298 1318 241 247 298 1318 241 247 159 192 38 SP 215-4 MMS 8 75 298 1318 241 247 298 1318 241 247 159 192 38 SP 215-5-AA MMS 8 92 3324 1494 241 247 3324 1494 241 247 183 192 364 SP 215-5-A MMS 8 92 3324 1494 241 247 3324 1494 241 247 183 192 364 SP 215-5 MMS 8 92 3554 1494 241 247 3554 1494 241 247 26 192 364 SP 215-6-AA MMS 8 11 373 167 241 247 373 167 241 247 26 192 424 SP 215-6-A MMS 8 11 373 167 241 247 373 167 241 247 26 192 424 SP 215-6 MMS 8 11 373 167 241 247 373 167 241 247 26 192 424 SP 215-7-AA MMS 1 132 3716 1846 241 247 187 237 536 SP 215-7-A MMS 1 132 3716 1846 241 247 187 237 536 SP 215-7 MMS 1 132 3716 1846 241 247 187 237 536 SP 215-8-AA MMS 1 147 492 222 241 247 27 237 611 SP 215-8-A MMS 1 147 492 222 241 247 27 237 611 SP 215-8 MMS 1 147 492 222 241 247 27 237 611 SP 215-9-AA MMS 1 17 4418 2198 276 276 222 237 661 SP 215-9-A MMS 1 17 4418 2198 276 276 222 237 661 SP 215-9 MMS 1 17 4418 2198 276 276 222 237 661 SP 215-1-AA MMS 12 19 4354 2374 276 276 198 286 781 SP 215-1-A MMS 12 19 4354 2374 276 276 198 286 781 SP 215-1 MMS 12 19 4354 2374 276 276 198 286 781 * Maximum diameter of pump with one motor cable. ** Maximum diameter of pump with two motor cables. AllpumpsarealsoavailableinNversionwithmotorsupto3kWinRversion. Dimensionsasabove. Other types of connection are possible by means of connecting pieces, see page 85. 68
Power curves SP 215 [hp] [kw] 112 SP 215 5 Hz ISO 996 Annex A 14 14-6 96-6-A -6-AA 12 88-5 8-5-A 1 72-5-AA -4 8 64 56-4-A -4-AA -3 6 48 4-3-A -3-AA 4 32-2 -2-A 24-2-AA 2 16 8-1 -1-A 4 8 12 16 2 24 28 Q [m³/h] 2 4 6 8 Q [l/s] TM1 8787 24 69
Power curves SP 215 [hp] 26 [kw] 192 SP 215 5 Hz ISO 996 Annex A 184 24 176-1 168-1-A -1-AA 22 16-9 2 152 144-9-A -9-AA -8 18 136 128-8-A -8-AA 16 12-7 -7-A 112-7-AA 14 14 96 12 88 8 4 8 12 16 2 24 28 Q [m³/h] 2 4 6 8 Q [l/s] TM1 8788 24 7
Technical data Submersible motors SP A, SP 1 x 23 V, submersible motors Electrical data Dimensions Motor Full load Motor efficiency [%] Power factor current I Control box for Capacitor for Length Weight Power Type Size I n [A] Ë 3-wire motors PSC motors [mm] [kg] [kw] 5% Ë 75% Ë Cos Ê Cos Ê Cos Ê ----- st 1% 5% 75% 1% I n MS 42 4".37 3.95 48. 54. 57..58.68.77 3.4* SA-SPM2 16µF, 4V, 5Hz 256 6.8 MS 42 4".55 5.8 49.5 56.5 59.5.52.65.74 3.5* SA-SPM2 2µF, 4V, 5Hz 291 8.2 MS 42 4".75 7.45 52. 58. 6..57.69.79 3.6* SA-SPM2 3µF, 4V, 5Hz 36 8.9 MS 42 4" 1.1 7.3 62. 69.5 72.5.99.99.99 4.3* SA-SPM3 4µF, 4V, 5Hz 346 1.5 MS 42 4" 1.5 1.2 56.5 66.5 71..91.96.98 3.9 SA-SPM3 346 11. MS 4 (R) 4" 2.2 14. 67. 73. 75..91.94.96 4.4 SA-SPM3 576 21. * Applies to 3-wire motors. MS422-wiremotorsincorporatemotorprotectionandcanthereforebeconnecteddirectlytothemains. 3 x 23 V, submersible motors Electrical data Dimensions Motor Full load Motor efficiency [%] Power factor current I Length Weight Type Size Power [kw] I n [A] Ë 5% Ë 75% Ë Cos Ê Cos Ê Cos Ê ----- st 1% [mm] [kg] 5% 75% 1% I n MS 42 4".37 2.55 51. 59.5 64..44.55.64 3.7 226 5.5 MS 42 4".55 4. 48.5 57. 64..42.52.64 3.5 241 6.3 MS 42 4".75 4.2 64. 69.5 73..5.62.72 4.6 276 7.7 MS 4 (R) 4".75 3.35 66.8 71.1 72.9.66.76.82 5.1 41 13. MS 42 4" 1.1 6.2 62.5 69. 73..47.59.72 4.6 36 8.9 MS 4 (R) 4" 1.1 5. 69.1 73.2 75..57.7.78 5.2 416 14. MS 42 4" 1.5 7.65 68. 73. 75..5.64.75 5. 346 1.5 MS 4 (R) 4" 1.5 7.4 66.6 71.4 72.9.53.66.74 4.5 416 14. MS 42 4" 2.2 1. 72.5 75.5 76..56.71.82 4.7 346 11.9 MS 4 (R) 4" 2.2 11.6 64.5 7.8 73.3.44.58.69 4.2 456 16. MS 4 (R) 4" 3. 14.6 67.5 72.8 74.6.48.62.73 4.4 496 17. MS 4 (R) 4" 4. 17.6 73.9 77.4 77.9.52.67.77 4.9 576 21. MS 4 (R) 4" 5.5 24.2 76. 78.8 79.6.51.66.76 4.9 676 26. MS 6 (R) 6" 5.5 24.8 77. 79. 8..51.64.73 4.5 544 35.5 MS 6 (R) 6" 7.5 32. 79. 82. 82..55.68.77 4.6 574 37. MS 6 (R) 6" 9.2 39.5 77. 8. 8..56.7.78 4.8 64 42.5 MS 6 (R) 6" 11 45. 81. 82.5 82.5.6.72.79 4.8 634 45.5 MS 6 (R) 6" 13 54.5 81. 82.5 82.5.58.71.78 4.8 664 48.5 MS 6 (R) 6" 15 62. 82. 83.5 83.5.59.71.78 5.2 699 52.5 MS 6 (R) 6" 18.5 76.5 82.5 84.5 84..56.69.77 5.3 754 58. MS 6 (R) 6" 22 87.5 84.5 85. 84..61.74.81 5.2 814 64. MS 6 (R) 6" 26 14 83.5 84. 83.5.61.73.81 5. 874 69.5 MS 6 (R) 6" 3 12 83. 84. 83..59.72.8 5. 944 77.5 MS 42 : Data apply to 3 x 22 V. 3 x 23 V, submersible rewindable motors Electrical data Dimensions Motor Full-load Motor efficiency [%] Power factor current I Length Weight Power Type Size I n [A] Ë [mm] [kg] [kw] 5% Ë 75% Ë Cos Ê Cos Ê Cos Ê ----- st 1% 5% 75% 1% I n MMS 6 6" 3.7 17.2 67.3 7.5 7..64.75.82 4.7 63 45 MMS 6 6" 5.5 24.2 75. 76.2 74.2.63.75.81 4.2 66 48 MMS 6 6" 7.5 32. 77.6 78.8 77.1.61.74.8 4.3 69 5 MMS 6 6" 9.2 38.5 76.9 78.2 76.7.64.76.82 4.6 72 55 MMS 6 6" 11 45.5 78.1 79.2 77.6.66.77.83 4.4 78 6 MMS 6 6" 13 52.5 8.8 81.5 79.8.65.77.82 4.8 915 72 MMS 6 6" 15 58.5 82. 82.8 81.3.66.78.83 5. 975 78 MMS 6 6" 18.5 67. 84.8 85. 83.3.76.85.88 5.7 185 9 MMS 6 6" 22 79.5 85. 85.3 83.8.75.84.87 5.8 1195 1 MMS 6 6" 26 1 84.3 85. 83.6.63.76.83 5.3 1315 115 MMS 6 6" 3 112 85. 85.4 84..66.78.84 5.5 1425 125 MMS 6 6" 37 146 84.7 85.5 84.4.59.73.8 5.9 1425 125 MMS 8 8" 22 82.5 8.4 83.5 84.1.71.8.84 5.4 11 126 MMS 8 8" 26 95.5 8.6 83.5 83.9.76.83.86 5.1 15 134 MMS 8 8" 3 11 82.5 85.2 85.6.71.8.84 5.9 111 146 MMS 8 8" 37 134 83.2 85.7 86..73.82.85 5.8 116 156 MMS 8 8" 45 168 84.3 87.1 87.8.62.74.81 6.3 127 177 MMS 8 8" 55 214 83.7 86.7 87.6.57.7.77 6.2 135 192 MMS 8 8" 63 21 87.2 88.7 88.5.81.87.9 7. 149 218 MMS 1 1" 75 27 83.4 85.7 85.9.72.81.85 5.2 15 33 MMS 1 1" 92 345 82.9 85.4 85.7.65.77.82 5.2 169 385 MMS 1 1" 11 385 84.7 86.2 85.7.8.86.88 5.5 187 435 71
Technical data Submersible motors SP A, SP 3 x 4 V, submersible motors Electrical data Dimensions Motor Full load Motor efficiency [%] Power factor current I Length Weight Power Type Size I n [A] Ë [mm] [kg] [kw] 5% Ë 75% Ë Cos Ê Cos Ê Cos Ê ----- st 1% 5% 75% 1% I n MS 42 4".37 1.4 51. 59.5 64..44.55.64 3.7 226 5.5 MS 42 4".55 2.2 48.5 57. 64..42.52.64 3.5 241 6.3 MS 42 4".75 2.3 64. 69.5 73..5.62.72 4.7 276 7.7 MS 4R 4".75 1.84 68.1 71.6 72.8.69.79.84 4.9 41 13. MS 42 4" 1.1 3.4 62.5 69. 73..47.59.72 4.6 36 8.9 MS 4R 4" 1.1 2.75 7.3 74. 74.4.62.74.82 5.1 416 14. MS 42 4" 1.5 4.2 68. 73. 75..5.64.75 5. 346 1.5 MS 4R 4" 1.5 4. 69.1 72.7 73.7.55.69.78 4.3 416 14. MS 42 4" 2.2 5.5 72.5 75.5 76..56.71.82 4.7 346 11.9 MS 4 (R) 4" 2.2 6.5 67.9 73.1 74.5.49.63.74 4.5 456 16. MS 4 (R) 4" 3. 7.85 71.5 74.5 75.2.53.67.77 4.5 496 17. MS 4 (R) 4" 4. 9.6 77.3 78.4 78..57.71.8 4.8 576 21. MS 4 (R) 4" 5.5 13. 78.5 8.1 79.8.57.72.81 4.9 676 26. MS 4 (R) 4" 7.5 18.8 75.2 78.2 78.2.52.67.78 4.5 776 31. MS 6 (R) 6" 5.5 13.6 78. 8. 8.5.55.67.77 4.4 544 35.5 MS 6 (R) 6" 7.5 17.6 81.5 82. 82..6.73.8 4.3 574 37. MS 6 (R) 6" 9.2 21.8 78. 8. 79.5.61.73.81 4.6 64 42.5 MS 6 (R) 6" 11 24.8 82. 83. 82.5.65.77.83 4.7 634 45.5 MS 6 (R) 6" 13 3. 82.5 83.5 82..62.74.81 4.6 664 48.5 MS 6 (R) 6" 15 34. 82. 83.5 83.5.64.76.82 5. 699 52.5 MS 6 (R) 6" 18.5 42. 83.5 84.5 83.5.62.73.81 5.1 754 58. MS 6 (R) 6" 22 48. 84.5 85. 83.5.67.77.84 5. 814 64. MS 6 (R) 6" 26 57. 84.5 85. 84..66.77.84 4.9 874 69.5 MS 6 (R) 6" 3 66.5 84.5 85. 84..64.77.83 4.9 944 77.5 3 x 4 V, submersible industrial motors Electrical data Dimensions Motor Full load Motor efficiency [%] Power factor current I Length Weight Type Size Power [kw] I n [A] Ë 5% Ë 75% Ë Cos Ê Cos Ê Cos Ê ----- st 1% [mm] [kg] 5% 75% 1% I n MS 4 (R) 4" 2.2 5.9 72.5 76.5 77..59.71.8 5. 496 17. MS 4 (R) 4" 3. 7.5 75. 79. 8..58.71.79 5.4 576 21. MS 4 (R) 4" 4. 9.75 75.5 79.5 79.5.67.78.84 5.3 676 26. MS 4 (R) 4" 5.5 14.4 77.5 79.6 79.8.55.69.79 5. 776 42.5 MS 6 (R) 6" 5.5 13.2 75. 79. 8..63.74.8 6. 64 42.5 MS 6 (R) 6" 7.5 17. 79.5 81. 81.5.71.8.84 4.9 634 45.5 MS 6 (R) 6" 9.2 2.2 8. 82.5 82.5.72.8.85 5.5 664 48.5 MS 6 (R) 6" 11 24.2 82. 83. 83..74.83.86 5. 699 52.5 MS 6 (R) 6" 13 28.5 82. 83.5 84..71.8.84 5.4 754 58. MS 6 (R) 6" 15 33. 82. 83.5 84..68.79.84 5.9 814 64. MS 6 (R) 6" 18.5 39.5 84. 85.5 85..71.8.85 5.8 874 69.5 MS 6 (R) 6" 22 48. 83.5 84.5 84.5.71.8.85 5.6 944 77.5 72
Technical data Submersible motors SP A, SP 3 x 4 V, submersible rewindable motors Electrical data Dimensions Motor Full-load Motor efficiency [%] Power factor current I Length Weight Power Type Size I n [A] Ë [mm] [kg] [kw] 5% Ë 75% Ë Cos Ê Cos Ê Cos Ê ----- st 1% 5% 75% 1% I n MMS 6 6" 3.7 9.85 67.1 7.4 7..63.75.81 4.6 63 45 MMS 6 6" 5.5 14. 74.8 76.1 74.2.62.75.81 4.2 66 48 MMS 6 6" 7.5 18.4 77.4 78.7 77.1.6.73.8 4.2 69 5 MMS 6 6" 9.2 22.4 76.8 78.2 76.7.64.76.81 4.6 72 55 MMS 6 6" 11 26. 78. 79.2 77.7.65.77.82 4.4 78 6 MMS 6 6" 13 3. 8.6 81.4 79.8.64.76.82 4.8 915 72 MMS 6 6" 15 34. 81.5 82.3 8.7.66.78.83 5. 975 78 MMS 6 6" 18.5 4.5 83.4 84.7 84..64.77.83 5.5 185 9 MMS 6 6" 22 47.5 83.6 84.8 83.9.65.77.83 5.6 1195 1 MMS 6 6" 26 56. 84.8 85.2 83.7.68.79.85 5.4 1315 115 MMS 6 6" 3 64. 85. 85.4 83.8.67.79.84 5.5 1425 125 MMS 6 6" 37 85.5 83.6 84.6 83.6.57.71.79 5.8 1425 125 MMS 8 8" 22 48. 79.5 82.1 82.1.72.81.84 5.3 11 126 MMS 8 8" 26 56.5 79.6 82. 81.9.76.83.85 5. 15 134 MMS 8 8" 3 64. 81.9 83.9 83.6.74.82.85 5.8 111 146 MMS 8 8" 37 78.5 82.4 84.4 84.2.74.82.85 5.7 116 156 MMS 8 8" 45 96.5 83.9 86. 86.2.65.76.82 6.3 127 177 MMS 8 8" 55 114 83.8 86. 86.1.72.81.85 6.4 135 192 MMS 8 8" 63 132 84.7 86.6 86.7.66.78.83 6.4 149 218 MMS 8 8" 75 152 85.6 87. 86.7.71.82.86 6.4 159 237 MMS 8 8" 92 186 86.8 87.6 86.8.72.82.86 6.7 183 283 MMS 8 8" 11 224 85.9 87. 86.5.73.83.87 6.6 26 333 MMS 1 1" 75 156 83.8 86.4 86.8.7.8.84 5.2 14 28 MMS 1 1" 92 194 84.3 86.8 87.1.67.78.82 5.2 15 33 MMS 1 1" 11 228 84.8 87. 87.5.7.79.84 5.5 169 385 MMS 1 1" 132 27 85.3 87.5 87.8.71.81.84 5.4 187 435 MMS 1 1" 147 315 83.9 86.8 87.4.64.75.81 5.8 27 5 MMS 1 1" 17 365 83.8 86.3 86.9.64.75.81 5.6 222 54 MMS 1 1" 19 425 83.2 86.1 86.7.6.72.79 5.7 24 58 MMS 12 12" 147 35 83.7 86.7 87.6.66.77.83 6.8 179 565 MMS 12 12" 17 345 84.5 87.2 87.9.69.79.85 6.7 188 65 MMS 12 12" 19 39 84.7 87.4 88.1.68.79.84 6.7 198 65 MMS 12 12" 22 445 84.8 87.3 87.9.69.8.85 6.9 214 7 MMS 12 12" 25 55 84.8 87.2 87.7.69.8.85 7. 229 775 3 x 5 V, submersible motors Electrical data Motor Full load Motor efficiency [%] Power factor Type Size Power [kw] current I n [A] Ë 5% Ë 75% Ë Cos Ê Cos Ê 1% 5% 75% Dimensions MS 4R 4".75 1.5 69.1 72.7 73.7.55.69.78 4.7 41 13. MS 4R 4" 1.1 2.2 7.3 74. 74.4.62.74.82 5. 416 14. MS 4R 4" 1.5 3.2 69.1 72.7 73.7.55.69.78 4.4 416 14. MS 4 (R) 4" 2.2 4.9 67.9 73.1 74.5.49.63.74 4.3 456 16. MS 4 (R) 4" 3. 6.3 71.5 74.5 75.2.53.67.77 4.6 496 17. MS 4 (R) 4" 4. 7.7 77.3 78.4 78..57.71.81 4.8 576 21. MS 4 (R) 4" 5.5 1.4 78.5 8.1 79.8.57.72.81 4.9 676 26. MS 4 (R) 4" 7.5 15. 75.2 78.2 78.2.52.67.78 4.5 776 31. MS 6 (R) 6" 5.5 1.8 78. 8. 8.5.56.67.77 4.4 544 35.5 MS 6 (R) 6" 7.5 14. 81. 82.5 82.5.6.72.8 4.5 574 37. MS 6 (R) 6" 9.2 17.4 78. 8. 8..62.73.81 4.6 64 42.5 MS 6 (R) 6" 11 19.8 82. 83.5 82..65.77.83 4.7 634 45.5 MS 6 (R) 6" 13 24. 82.5 83.5 82.5.62.74.81 4.6 664 68.5 MS 6 (R) 6" 15 27. 82. 83. 83..65.76.82 5. 699 52.5 MS 6 (R) 6" 18.5 33.5 83.5 84.5 84..61.73.81 5.1 754 58. MS 6 (R) 6" 22 38.5 84.5 85. 84..67.77.84 5. 814 64. MS 6 (R) 6" 26 45.5 84.5 85. 84..66.77.84 4.9 874 69.5 MS 6 (R) 6" 3 53. 85. 84.5 83.5.64.76.83 4.9 945 77.5 Cos Ê 1% I ----- st I n Length [mm] Weight [kg] 73
Technical data Submersible motors SP A, SP 3 x 5 V, submersible industrial motors Electrical data Motor Full load Motor efficiency [%] Power factor Type Size Power [kw] current I n [A] Ë 5% Ë 75% Ë Cos Ê Cos Ê 1% 5% 75% 3 x 5 V, submersible rewindable motors Cos Ê 1% Dimensions MS 4 (R) 4" 2.2 4.7 72.5 76.5 77..59.71.8 4.9 496 17. MS 4 (R) 4" 3. 6.2 75. 79. 8..58.71.79 5.4 576 21. MS 4 (R) 4" 4. 7.8 75.5 79.5 79.5.67.78.84 5.2 676 26. MS 4 (R) 4" 5.5 11.6 77. 79.5 8..55.68.78 5. 776 31. MS 6 (R) 6" 5.5 1.6 75. 78.5 8..63.74.8 6. 64 42.5 MS 6 (R) 6" 7.5 13.6 79.5 81. 81.5.71.8.84 4.9 634 45.5 MS 6 (R) 6" 9.2 16.2 8. 83. 83..72.81.84 5.5 664 48.5 MS 6 (R) 6" 11 19.4 82. 83.5 83.5.74.82.86 5. 699 52.5 MS 6 (R) 6" 13 22.8 82.5 83.5 84..71.8.84 5.4 754 58. MS 6 (R) 6" 15 26.4 82. 84. 84.5.71.79.84 5.9 814 64. MS 6 (R) 6" 18.5 31.5 84.5 85.5 85..71.81.85 5.8 874 69.5 MS 6 (R) 6" 22 38.5 84. 84.5 84.5.71.8.85 5.6 944 77.5 Electrical data Motor Full load Motor efficiency [%] Power factor Type Size Power [kw] current I n [A] Ë 5% Ë 75% Ë Cos Ê Cos Ê 1% 5% 75% Length [mm] Weight [kg] Dimensions MMS 6 6" 7.5 14.4 78. 77.6 73.9,73.82.85 4.2 69 5 MMS 6 6" 9.2 17.4 77.4 78.1 76..69.8.84 4.6 72 55 MMS 6 6" 11 15. 78.8 79.3 77.1.71.81.85 4.6 78 6 MMS 6 6" 13 23.4 82. 82.4 8.4.69.98.84 5. 915 72 MMS 6 6" 15 26.5 82.7 82.5 79.9.76.84.86 5.2 975 78 MMS 6 6" 18.5 31.5 83.9 84.8 83.7.7.81.85 5.6 185 9 MMS 6 6" 22 36.5 85.3 85.5 83.9.77.85.87 5.8 1195 1 MMS 6 6" 26 44.5 84.8 85.2 83.6.68.79.85 5.5 1315 115 MMS 6 6" 3 5.5 85.7 85.6 83.8.72.82.86 5.6 1425 125 MMS 6 6" 37 63. 86. 86.1 84.5.68.79.84 6.3 1425 125 MMS 8 8" 22 37.5 8.7 83.1 82.9.79.85.87 5.5 11 126 MMS 8 8" 26 44. 81. 83.5 83.4.8.85.86 5.2 15 134 MMS 8 8" 3 49.5 83.3 85.4 85.3.78.85.86 6. 111 146 MMS 8 8" 37 6.5 83.8 85.4 84.8.82.87.87 5.9 116 156 MMS 8 8" 45 72. 85.2 87.3 87.4.73.82.86 6.7 127 177 MMS 8 8" 55 88.5 85.8 87.9 88.1.71.81.86 6.9 135 192 MMS 8 8" 63 96.5 87.2 88.6 88.3.82.88.9 7. 149 218 MMS 8 8" 75 114 87.8 88.7 88.1.85.89.9 7. 159 237 MMS 8 8" 92 142 88. 88.6 87.7.81.87.89 7. 183 283 MMS 8 8" 11 182 86. 88. 88.2.67.78.84 6.5 26 333 MMS 1 1" 75 122 84.6 86.7 86.8.77.84.86 6.5 14 28 MMS 1 1" 92 15 85. 87. 87.1.74.82.85 6.5 15 33 MMS 1 1" 11 178 85.4 87.4 87.5.76.84.86 6.9 169 385 MMS 1 1" 132 21 86.3 87.8 87.4.82.87.88 6.7 187 435 MMS 1 1" 147 236 85.4 87.6 87.9.74.83.86 7.2 27 5 MMS 1 1" 17 27 85.8 87.6 87.5.78.85.87 7. 222 54 MMS 1 1" 19 35 86.1 87.7 87.4.8.86.87 7.1 24 58 MMS 12 12" 147 218 86.1 88.8 89.7.8.88.91 7.6 179 565 MMS 12 12" 17 265 86.7 89.3 9.1.74.82.86 6.7 188 65 MMS 12 12" 19 22 87.8 9. 9.5.85.91.93 7.7 198 65 MMS 12 12" 22 335 87.5 89.7 9.2.79.86.88 7. 214 7 MMS 12 12" 25 375 87. 89.7 9.6.75.85.89 7.6 229 775 Cos Ê 1% I ----- st I n I ----- st I n Length [mm] Weight [kg] 74
Accessories SP A, SP CU 3 The CU 3 control unit is an electronic motor starter for monitoring and protecting installations with rated voltages of 2-575 V, 5-6 Hz, and a maximum power consumption of 4 A. R1 CU 3 The CU 3 monitors the following parameters: System insulation resistance to earth before start. Motor temperature. Motor current consumption and current unbalance. Voltage supply. Phase sequence. The CU 3 protects against: TM 737 196 Dry running (not for certain MS 42 motors). Incipient motor defect. Too high motor temperature (not for certain MS 42 motors). Motor burnout. CU 3 192.5 mm 54.5 mm As standard, the CU 3 incorporates: Time relay for star-delta starting and autotransformer starting. Relay output for external fault indication. In addition CU 3 can be expanded to offer the following functions: Remote control R1: Wireless infra-red remote control by means of the R1. This function enables the user to change factory settings and to monitor the installation by calling up actual operating data, e.g. current consumption, supply voltage and operating hours. External sensors SM 1: Reception of data from external sensors by means of an SM 1 sensor module and control according to the data received, e.g. flow rate, pressure, water level and conductivity. Communication module: Monitoring and communication via a data BUS (GENIbus), a modem or radio, e.g. PC-based control/monitoring. Technical data 2 mm SM 1 2 mm 192.5 mm 54.5 mm TM 738 196 TM1 42 4798 Enclosure class: IP 2. Ambient temp.: 2 C to+6 C. Relative humidity: 99%. Voltage variation: 25/+15% of nominal voltage. Frequency: 45 Hz to 65 Hz. Max. back-up fuse: 1 A. Relay output: Max. 415 V, 3 A, AC 1. Approvals: The CU 3 complies with: VDE, DEMKO, EN, UL and CSA. Marking: CE. 89 mm 5 mm 16 mm Single-turn transformers, 1-4 A. No monitoring of motor temperature. 1 mm 33 mm Signal converter, 1-12 A/2-12 A, with monitoring of motor temperature. 5 mm TM 7866 196 75
Accessories SP A, SP Control functions This table describes the protection provided by CU 3. Control parameters Function Problem Advantages Ground failure Temperature Overvoltage/ undervoltage Overload Dry running Current unbalance Phase sequence Insulation resistance is measured only when motor is not operating. A high-impedance voltage is applied to the motor leads and leakage to ground is measured. If the factory-set value is higher than the one measured the motor cannot be started. MS The actual motor temperature is measured by means of the built-in Tempcon temperature transmitter and a signal is sent to CU 3 via the phaseleads.incu3themeasuredtemperatureis compared with the factoryset value. MMS The actual motor temperature is measured by means of the Pt1. Via a relay, the signal is sent to the CU 3 where the measured temperature is compared with the factory-set value. Temperature protection requires a submersible motor with a Pt1. If the factory-set values are exceeded, a fault indication is given. If the CU 3 receives a temperature signal, the voltage is no longer monitored, but the motor will continue to run. Therefore, the motor and consequently the pump operation will be affected by voltage variations critical to the life of the motor. If there is no temperature signal, the motor will be stopped in case of overvoltage/undervoltage. The motor power input is measured on each of the three phases. The registered power input is average of these three values. If the factory-set value is exceeded, the motor will stop. The motor power input is measured on each of the three phases. The registered power input is an average of these three values. If the average value is lower than the factory-setting value, the motor will stop. The power input of the motor is measured on each of the three phases. CU3andmotorareinstalledsothatthephase sequence corresponds to correct direction of rotation. CU 3 monitors changes in the phase sequences. Damaged or decomposed insulation in motor, cable or cable joint. Overload, frequent starts/ stops, operation against blocked discharge pipe, insufficient flow velocity past the motor. The installation is close to a transformer, the mains do not absorb load variations. Incorrect dimensioning of pump/motor, voltage supply failure, defective cable, blocking, wear or corrosion. Pump exposed to dry running or underload, for example caused by wear. Mains load is uneven, incipient motor defect, phase voltages diverging. Two phases are wrongly connected. Possibility of failure indication on motor, cable and cable joint, service indication. Longer motor life, safe operating conditions, service indication. Important installation parameter, possibility of improving operating conditions. Longer pump lift, safe operating conditions, service indication. Traditional dry-running protection is no longer necessary, no extra cables. Motor protection against overload, service indication. Ensures correct pump performance. 76
Accessories SP A, SP Features and benefits Selecting the right pump The Grundfos CU 3 control unit and a flowmeter provide for a constant monitoring of energy consumption and performance of the pump thus making it possible to ensure that the right pump is selected for the application in question. The CU 3 control unit makes it possible to choose the borehole(s) to be in operation which offer(s) the lowest operating costs. kwh Time TM 7296 196 Choosing the right time for service The constant monitoring by the CU 3 control unit makes it possible to service the pump, i.e. clean it and replace wear parts, at the best possible time. Today service and maintenance work is often carried out at regular intervals or when actual downtime occurs. Both are unlikely to result in an optimum energy-efficient operation. Operating costs Time for service kwh Time Time TM 7297 196 Avoiding overpumping Using the Grundfos CU 3 control unit and a water level sensor it is possible to carry out test pumping of each borehole. This is done by measuring the water table level and the volume of water which is pumped. The purpose is to ensure that only the water naturally running to the borehole is pumped. As a result operations will provide for optimum efficiency. Consequently, the lives of both borehole and pump will increase, since both water aeration and the risk of ingress of aggressive water are reduced. Reducing costs of water treatment By minimizing the risk of overpumping and thus the pumping of impure ground water the costs of water treatment can be reduced to a minimum. Using the Grundfos CU 3 control unit and a sensor it is possible to measure water conductivity in each borehole. This provides for the possibility of selecting the borehole (or boreholes) to be in operation which supplies the best water quality at any time. Conductivity Time TM 7298 196 TM 7299 196 77
Reset Netz ein Motor læuft Massefehler Motortemperatur Trockenlauf (blinkt) /!berlast (leuchtet) Unterspannung (blinkt) /!berspannung (leuchtet) Stromasymmetrie Phasenfolge Reset Netz ein Motor læuft Massefehler Motortemperatur Trockenlauf (blinkt) /!berlast (leuchtet) Unterspannung (blinkt) /!berspannung (leuchtet) Stromasymmetrie Phasenfolge Accessories Motor protection via CU 3 Monitoring parameters (Diodes) Power on Motor on Motor temperature Ground failure Overload/dry running Overvoltage/undervoltage Current unbalance Direction of rotation SP A, SP Control unit CU 3 with R1 remote control and printer Monitoring parameters (Diodes) Power on Motor on Motor temperature Ground failure Overload/dry running Overvoltage/undervoltage Current unbalance Direction of rotation CU 3 CU 3 Wireless infra-red communication R 1 Signal converter 1-12 [A], 1-12 [A] or single transformers 1-4 A 3x4V,5Hz 3x5V,5Hz Signal converter Signal 1-12 [A], 1-12 [A] or single transformers 1-4 A 3x4V,5Hz 3x5V,5Hz Control cabinet Control cabinet Connection to pump No extra cable required High-frequency signals Connection to pump No extra cable required High-frequency signals Ground level Ground level Inductive flowmeter Water level Water level Riser pipe Riser pipe Submersible pump Submersible motor with Tempcon or Pt1 TM 7977 2293 Submersible pump Submersible motor with Tempcon or Pt1 TM 7978 2293 78
OK Accessories SP A, SP R1 Menus. General 1. Operation 1.1 Warning and stop indication 1.2 Indication of automatically reset fault indications Possibility of start and stop. 2. Status Indication of: 2.1 Motor temperature 2.2 Current and voltage values 2.3 Average supply voltage 2.4 Average input current of the three phases 2.5 Actual current unbalance 2.6 Actual insulation resistance to earth 2.7 Phase sequence and frequency 2.8 Actual power input and total power consumption 2.9 Accumulated number of operating hours 2.1 Value measured by an external sensor 2.11 Energy consumption per m³ pumped liquid 2.12 Actual flow 2.13 Accumulated flow. The R1 offers a number of setting possibilities: 3. Limits Indication and setting of: 3.1 Motor temperature 3.2 Current stop limits 3.3 Current warning limits 3.4 Voltage variations 3.5 Insulation resistance 3.6 Current unbalance 3.7 Stop for external sensor. 3.8 Warning limits for external sensor 4. Installation Setting possibilities: 4.1 Automatic or manual resetting of fault indications 4.2 Release time for fault indications 4.3 Star connection time for star-delta or auto-transformer starting 4.4 Starting delay when first started, e.g. after supply failure 4.5 Minimum start cycle time 4.6 On/off of groundwater lowering function 4.7 Run/stop times for groundwater lowering 4.8 Electronic numbering of CU 3 units 4.9 On/off of power and temperature measuring function 4.1 External sensor type On/off of external analog sensor with or without zero offset Maximum value of external analog sensor 4.11 Groundwater lowering by means of level sensors Filling and emptying function 4.12 On/off of external digital sensor. Status Report All settings and measured values can be transferred to a portable printer via wireless infra-red communication and be printed in a status report. CU 3 IR -- Printer Drucker Wireless infra-red drahtlose communication Infrarot Kommunikation R R1 R R1 1 TM 7981 2293R1 TM 7982 2293 79
Accessories SP A, SP Menu structure of the R1 remote control Start Set Light Contrast. General 1. Operation 2. Status 3. Limits 4. Installation 1.1 2.1 3.1 4.1 1.2 2.2 3.2 4.2 2.3 3.3 4.3 2.4 3.4 4.4 2.5 3.5 4.5 2.6 3.6 4.6 2.7 3.7 4.7 2.8 3.8 4.8 2.9 4.9 2.1 4.1 2.11 4.11 2.12 4.12 2.13 TM1 226 21 8
Accessories Complete borehole monitoring system with CU 3 and SM 1 Monitoring parameters (Diodes) Power on Motor on Motor temperature Ground failure Overload/dry running Overvoltage/undervoltage Current unbalance Direction of rotation SM 1 SP A, SP The SM 1 sensor module can be connected to eight analog sensors and have eight digital inputs for sensors, e.g. monitoring - ph value - conductivity -O 2 - pressure -etc. Gateway (not Protokollumsetzer supplied with the unit) (bauseits) CU3 CU3 CU3 SM1 GRUNDFOS-GENIbus max. 12 m PC (not supplied with the unit) PC TM 798 2293 Communication module CU 3 SM 1 Gateway (not supplied with the unit) Maximum connection to the GENIbus: 28 CU 3 units, or 14 CU 3 units and 14 SM 1 units, or 27 CU 3 and 1 SM 1. Signal converter 1-12 [A], 1-12 [A] or single-turn transformers 1-4 A 3x4V,5Hz 3x5V,5Hz Connection to pump No extra cable required High-frequency signals RS-485 Control cabinet Digital inputs For analog sensors Product numbers CU3-3x4V Product Current range for signal converter [A] number 1-12 1-12 1-4 62 5 2 93 62 5 2 94 62 5 2 95 Ground level Inductive flowmeter Water level Riser pipe Submersible pump Submersible motor with Tempcon or Pt1 TM 7979 2293 Single-turn transformers CU 3 expansion possibilities Product Range Product number SensormoduleSM1 3x4[V] 626191 CommunicationmoduleRS485-626159 Remote control R1 HP printer for R1 Signal converter - - 62 53 33 62 4 8 1-12[A] 62497 1-12[A] 62498 1-4 [A] 62 61 48 81
Accessories SP A, SP G1 - Gateway for communication with Grundfos products Through G1 Grundfos offers optimum integration of Grundfos products into main control and monitoring systems. G1 is a product meeting future requirements of optimum pump operation, e.g. as to reliability and low operating costs. TM1 1787 198G1 Management system (SCADA) Radio Modem PLC Direct Interbus-S Profibus-DP Radio 4 digital inputs Main network G 1 GATEWAY GENIbus DI Service Bus In POWER POWER MNC POWER GENI GENI TxD GENI RxD FAULT Main Network Connection RBDA TR BA RC Bus Out RS-232 Service port for pc Heating UPE TPE UPS Water treatment Industry CU 3 BMQE- NE CU 3 BMB CU 3 CU 3 CU 3 BM BMET CRN Water supply E- pump GENIbus Control 2 MGE E- pump CU 3 Wastewater MG Hydro 2 SM1 CU 3 CU 3 CU 3 CU 3 CU 3 SM SM 1 CU 3 1 CR NK SP-G SP SQE Sensors Sensors AP TM1 184 35 Sensors 82
Accessories SP A, SP Product description G1 is a gateway enabling communication of operating data, e.g. measured values and setpoints, between Grundfos products equipped with a Grundfos GENIbus interface and a main network for control, adjustment and monitoring of operation. Furthermore, G1 has 4 digital inputs for optional use. As an example, a digital input could be used for the monitoring of an Uninterruptible Power Supply (UPS). Data logging Besides the possibility of data communication, G1 also offers data logging of up to 35, time-stamped data. Subsequently, the logged data can be transmitted to the main system or PC for further analysis for instance in a spreadsheet or the like. For the data logging the software tool "PC Tool G1 Data Log" is used. This is a part of the PC Tool G1 package which must be ordered seperately. Applications As shown in the illustration on page 82, G1 can be used within various areas, e.g. water supply, water treatment, wastewater, building automation and industry. Such applications are characterized by the fact that downtime causes high costs and that extra investments are often made to achieve maximum reliability. G1 is made for customers requiring continuous, optimum operation, and who need to know specific operating data from each individual pump unit and who are not satisfied by calculated operating data or total measurings that are often based on many units. Installation G1 is installed by the system integrator. G1 is connected to Grundfos GENIbus and to the main network. From a management system on the main network all units on the Grundfos GENIbus can then be controlled. The floppy disks "G1 Support Files" comprises examples of programs to be used when G1 is connected to the various main network systems, and a description of the data points available in Grundfos products with GENIbus interface. When G1 is installed, the software tool "PC Tool G1" can be used. This is a part of the PC Tool G1 package which must be ordered seperately. 227 mm G1 GATEWAY Bus In POWER POWER MNC POWER GENI GENI TxD GENI RxD FAULT GENIbus DI Service Bus Out Main Network Connection Technical data Overview of protocols Main system Software protocol Interbus-S PCP Profibus-DP DP Radio Satt Control COMLI/MODbus Modem Satt Control COMLI/MODbus PLC Satt Control COMLI/MODbus Future systems... Other connection features RBDA TR BA RC GENIbus RS-485: Up to 32 units can be connected. Service port RS-232:For direct connection to PC or via modem. Digital inputs: 4. Logging capacity 2 Mb ~ approx. 35, time-stamped data Voltage supply: 1 x 11-24 V, 5/6 Hz Ambient temperature: In operation: 2 C to+6 C Enclosure class: IP 2 Weight: 1.8 kg Product numbers 73 mm 165 mm Product Product number G1 with Interbus-S expansion board* 96 41 11 34 G1 with Profibus-DP expansion board* 96 41 11 35 G1withRadio/Modem/PLC-expansionboard* 96411136 G1BasicVersion* 96411137 PC Tool G1 package 96 41 57 83 *Floppy disk with G1 Support Files included. TM1 621 398 Accessories PC Tool G1 package (ordered separately) G1 Support Files (supplied with product) 83
Accessories MTP 75 motor protection Long motor life The MTP 75 protects against too high motor temperature. This is the most simple and the cheapest way of ensuring long motor life. The customer is certain that operating conditions are observed and is given indication of the time when a service check should be made. Too high motor temperature may be caused by: Overload Frequent starting/stopping (hunting) Operation against closed valve/frozen discharge pipe Insufficient flow of liquid past the motor Pumping of too hot water Deposits on the motor Overvoltage Undervoltage Current unbalance Dry running (Note that the pump is not protected if the water table is below the pump inlet. For example this may occur if several boreholes are located close to each other). Application and installation The MTP 75 can be used only for motors with built-in temperature transmitter and should be installed for instance in a control cabinet. The MTP 75 may be installed in any type of control cabinet containing a thermal relay with differential release and contactor. The thermal relay is necessary to protect against blocking or phase failure, since this will cause the temperature to rise much faster than the MTP 75 is able to register. The MTP 75 is supplied with base for mounting on DIN rail. Operation The temperature transmitter will send a high-frequency signal indicating the motor temperature through the motor supply cable. The MTP 75 will stop the motor via the contactor if the temperature rises above 75 C. The temperature limit is factory-set and cannot be changed. Display: No light: Motor stopped. No supply voltage or electrical fault at temperature measuring. Green light: Motor in operation and motor temperature OK, i.e. below 75 C. Red light: Motor stopped and motor temperature too high, i.e. above 75 C. The MTP 75 is reset manually by pressing the reset button on the front cover or by switching off the voltage supply to the MTP 75. SP A, SP No unnecessary downtime Since the MTP 75 measures only the temperature and no other parameters causing a temperature rise, the motor and thus the pump will stop only when the motor temperature is too high. Reliability The MTP 75 is reliable due to its simple construction and because it requires no extra cables in the borehole. TM 739 196 78 mm 35 mm Technical data of MTP 75 14 mm Supply voltage: 2 variants: 1 x 2-24 V ±1%, 5/6 Hz. 3 x 38-415 V ±1%, 5/6 Hz. A transformer is required for voltages over 415 V. Control voltage: Contact load: Maximum 415 V/3 A. Minimum 12 V/2 ma. Enclosure class: IP 2. Operating conditions: Min. temperature: 2 C. Max. temperature: +6 C. Relative humidity: 99%. Storage: Min. temperature: 2 C. Max. temperature: +6 C Relative humidity: 99%. Approvals: Complying with the regulations of VDE and DEMKO. Product numbers MTP 75 without plug-in base, capacitor and signal transformer: Voltage range [V] Product number 1x2-24 625178 3x38-415 625179 MTP 75 complete with plug-in base, capacitor and signal transformer: Voltage range [V] Product number 1x2-24 62584 3x38-415 62585 TM 7874 2196 84
Accessories SP A, SP Connecting pieces The tables below show the range of connecting pieces for connection of thread to flange and thread to thread. Thread - Flange Thread - Thread D v1 v2 B A L A C E x n B F TM1 2396 1698 L TM1 2397 1698 Type Pump outlet Connecting piece Thread - Flange Product number Dimensions [mm] A v 1 v 2 n DIN W.-Nr. DIN W.-Nr. B C D E F L 1.431 1.441 R2½ JIS 2 R 2½ 1 5.5 3 ø11 125 2 3 12 6 12 51 22 12 56 18 R2½ JIS 2.5 R 2½ 115 57 3 ø11 14 2 22.5 9 8 125123 125619 R2½ DIN5PN16 R2½ 125 62.5 22 ø18 165 95 45 18 4 ID 81 42 SP 17 Rp 2.5 R2½ DIN5PN4 R2½ 125 62.5 22 ø18 165 97 45 18 4 ID 81 43 R2½ DIN65PN16 R2½ 145 72.5 22 ø18 185 1 45 18 4 ID 81 44 R2½ DIN65PN4 R2½ 145 72.5 25 ø18 185 11 22.5 18 8 ID 81 45 R2½ DIN8PN16 R2½ 16 8 25 ø18 2 95 22.5 18 8 ID 81 46 R2½ DIN8PN4 R2½ 16 8 25 ø18 2 99 22.5 18 8 ID 81 47 R3 JIS 3 R 3 136 66 35 ø15 165 2 22.5 9 8 135121 135617 R3 DIN65PN16 R3 145 72.5 22 ø18 185 15 45 18 4 ID 81 52 R3 DIN65PN4 R3 145 72.5 25 ø18 185 19 22.5 18 8 ID 81 53 SP 3 Rp 3 R3 DIN8PN16 R3 16 8 25 ø18 2 11 22.5 18 8 ID 81 54 R3 DIN8PN4 R3 16 8 25 ø18 2 12 22.5 18 8 ID 81 55 R3 DIN 1 PN 16 R 3 18 9 25 ø18 22 17 22.5 18 8 ID 81 56 R3 DIN 1 PN 4 R 3 19 95 25 ø22 22 19 22.5 18 8 ID 81 57 R4 JIS 4 R 4 155 72 35 ø15 18 2 22.5 9 8 155124 155622 R3 DIN65PN16 R3 145 72.5 22 ø18 185 15 45 18 4 ID 81 52 R3 DIN65PN4 R3 145 72.5 25 ø18 185 19 22.5 18 4 ID 81 53 R3 DIN8PN16 R3 16 8 25 ø18 2 11 22.5 18 8 ID 81 54 SP 46 Rp 3 R3 DIN8PN4 R3 16 8 25 ø18 2 12 22.5 18 8 ID 81 55 SP 6 Rp 4 R3 DIN 1 PN 16 R 3 18 9 25 ø18 22 17 22.5 18 8 ID 81 56 R3 DIN 1 PN 4 R 3 19 95 25 ø22 22 19 22.5 18 8 ID 81 57 R4 DIN 1 PN 16 R 4 18 9 25 ø18 22 12 22.5 18 8 ID 81 58 R4 DIN 1 PN 4 R 4 19 95 25 ø22 235 13 22.5 18 8 ID 81 59 SP 77 SP 95 SP 125 SP 16 SP 215 Rp 5 Rp 6 R5 JIS 4 R 5 155 75 35 ø15 18 313 22.5 9 8 19542 195545 R5 JIS 5 R 5 19 97 45 ø19 225 315 22.5 9 8 19543 195546 R5 DIN 1 PN 16 R 5 18 95 45 ø18 225 315 22.5 9 8 198926 198976 R5 DIN 1 PN 4 R 5 19 12.5 45 ø22 24 314 22.5 9 8 198927 198977 R5 DIN 125 PN 16 R 5 21 11 45 ø18 25 317 22.5 9 8 198914 198964 R5 DIN 125 PN 4 R 5 22 12 45 ø26 27 317 22.5 9 8 198915 198965 R5 DIN 15 PN 16 R 5 24 127.5 45 ø22 285 317 22.5 9 8 19894 198954 R5 DIN 15 PN 4 R 5 25 135 45 ø26 3 323 22.5 9 8 19895 198955 R6 JIS 5 R 6 19 97 45 ø19 225 316 22.5 9 8 25128 25628 R6 JIS 6 R 6 224 111 45 ø19 252 317 22.5 9 8 25129 25629 R6 DIN 125 PN 16 R 6 21 11 45 ø18 25 317 22.5 9 8 198928 198978 R6 DIN 125 PN 4 R 6 22 12 45 ø26 27 321 22.5 9 8 198929 198979 R6 DIN 15 PN 16 R 6 24 127.5 45 ø22 285 317 22.5 9 8 198916 198966 R6 DIN 15 PN 4 R 6 25 135 45 ø26 3 323 22.5 9 8 198917 198967 R6 DIN 2 PN 16 R 6 295 155 45 ø22 34 317 15 9 12 19 89 6 19 89 56 R6 DIN 2 PN 4 R 6 32 172.5 45 ø3 375 327 15 9 12 19 89 7 19 89 57 Type SP 77 SP 95 SP 125 SP 16 SP 215 Thread - Thread Product number Pump Dimensions Connecting piece outlet A DIN W.-Nr. DIN W.-Nr. Length [mm] 1.431 1.441 Rp 5 R5 Rp4 R 5 121 19. 63 19.5 85 R5 Rp6 R 5 15 19. 69 19.5 91 NPT 5 NPT 5 NPT 4 NPT 5 121 19. 64 19.5 86 NPT 5 NPT 6 NPT 5 15 19. 7 19.5 92 Rp 6 R 6 Rp 5 R 5 15 2.1 3 2.6 4 NPT6 NPT6 NPT 5 NPT 6 15 2.1 35 2.6 45 85
Accessories SP A, SP Cable termination kit with plug Description Version Prod. no. TM 7883 2296 For watertight joining of motor cable and submersible drop cable in an acrylic tube filled with resin. Used for both single and multi-core cables during installation of submersible pumps. 24 hours of hardening is required. MS 42 and MS 4 up to 7.5 kw: For cables up to 4 x 2.5 mm 2 79 99 1 For cables up to 4 x 6 mm 2 79 99 2 Cable termination kit type KM TM 7885 2296 Description For watertight shrink-joining of motor cable and submersible drop cable. Enables the joining of: - cables of equal size. - cables of different sizes. - acableleadandasingle-lead. The joint is ready for use after a few minutes and requires no long hardening time as do resin joints. The joint cannot be separated. Version Motor cable [mm 2 ] Flat cable Flat cable 1.5-6. 1.5-4. 6-1 1-16 Number of leads 3 4 4 3 Prod. no. 11 62 51 11 62 52 Flat cable 16-25 3 4 11 62 55 3 single leads 1.5-6. 3 11 62 53 3 single leads 1-25 3 11 62 54 4 single leads 1.5-4. 4 11 62 57 4singleleads 6-16 4 116258 Zinc anodes Application Cathodic protection by means of zinc can be used for corrosion protection of SP pumps in chloride-containing liquids such as brackish water and sea water. Sacrificial anodes are placed on the outside of the pump and motor as protection against corrosion. The number of anodes required depends on the pump and motor in question. Please contact Grundfos for further details. Liquid temperatures Seawater:Upto35 C. Brackish water (min. 15 g/m 3 chloride): Up to 35 C. Anode life The zinc anodes have a life of one to four years, depending on operating conditions (temperature, flow and chloride content). Product numbers of zinc anodes Product number SP 17 Zinc anodes for pumps SP 3 SP 46 Used for pump type 96 42 14 45 96 42 14 47 96 42 14 48 96 42 14 49 96 42 14 5 Zinc anodes for motors 4" Motors 6" Motors 8" Motors 12" Motors 96 42 14 44 96 42 14 46 96 42 14 5 96 42 14 51 SP 6 SP 77 SP 95 SP 125 SP 16 SP 215 86
Accessories SP A, SP Flow sleeves Grundfos offers a complete range of stainless steel flow sleeves for both vertical and horizontal operation. Flow sleeves are recommended for all applications in which motor cooling is insufficient. The result is a general extension of motor life. Flow sleeves are to be fitted: if the submersible pump is exposed to high thermal load like current unbalance, dry running, overload, high ambient temperature, bad cooling conditions. if aggressive liquids are pumped, since corrosion is doubled for every 1 C the temperature rises. If sedimentation or deposits occur around and/or on the motor. Note: More information about accessories is available on request. SA-SPM control boxes Application SA-SPM control boxes are used as starting units for single-phase, 3-wire motors, types MS 42B and MS 4. SA-SPM 2 is used for single-phase MS 42B motors with a power input lower than or equal to.75 kw. SA-SPM 3 is used for single-phase MS 42B and MS 4 motors with a power input higher than or equal to 1.1 kw. SA-SPM 3 incorporates a motor starter and thus protects the motor against overload. Technical data Enclosure class: IP 42. Ambient temperature: 2 C to6 C. Relative humidity: Maximum 95%, normal nonaggressive atmosphere. Capacitors for MS 42B PSC MS 42B PSC motors must be connected to the mains via a run capacitor that is permanently connected during operation. Product numbers Capacitors for MS 42B PSC Capacitor size Power [kw] Capacitor part no. Control box part no. 16 µf, 4 V 5 Hz.37 ID 29 7 96 2 37 91 2 µf, 4 V 5 Hz.55 ID 29 71 96 2 37 92 3 µf, 4 V 5 Hz.75 ID 29 73 96 2 37 93 4 µf,4v5hz 1.1 ID2974 9623794 TM1 751 2197 - TM1 75 2197 Product numbers Product number 5 Hz SA-SPM control box MS 42B MS 4 1 x 22-23 V 1x24V SA-SPM 2 SA-SPM 3.37 kw.55 kw.75 kw 1.1 kw 1.5 kw 2.2 kw 82 21 95 12 82 21 95 13 82 21 95 14 82 21 93 15 82 21 93 6 82 21 93 7 82 24 95 12 82 24 95 13 82 24 9514 82 24 93 15 82 24 93 6 82 24 93 7 87
Accessories SP A, SP Pt1 The Pt1 sensor allows continuous monitoring of the motor temperature protection against too high motor temperature. Protecting the motor against too high motor temperature is the simplest and cheapest way of avoiding that motor lifetime is reduced. Pt1 ensures that operating conditions are not exceeded and indicates when it is time for service of the motor. Monitoring and protection by means of Pt1 require the following parts: Pt1 sensor. Relay type EDM 35 or PR 222. Cable. The EDM 35 relay is fitted with a Pt1 module. For both relays the following temperature limits are pre-set on delivery: 6 C warning limit. 75 C stop limit. Technical data Relay type EDM 35 PR 222 Enclosure class IP 65 IP 5 Ambient temp. C to+5 C 2 C to+6 C Relative humidity 9% 9% Voltage variation Frequency Approvals Mark 1/+1% of nominal voltage 5/6 Hz UL, CSA, SEV CE 24 VDC 2/+2% of nominal voltage Example: Pt1 for Grundfos MMS submersible motors TM1 8141 599 Product numbers Pt1 sensor including EDM 35 relay and cable Product number Voltage Cable length 24 V, 5/6 Hz 115 V, 5/6 Hz 23 V, 5/6 Hz MS 6 MMS MS 6 MMS MS 6 MMS 2m 9642869 96437277 9642864 96437282 9648953 96437287 4m 964287 96437278 9642865 96437283 9648681 96437288 6m 9642871 96437279 9642866 96437284 9648954 96437289 8m 9642872 9643728 9642867 96437285 9648955 9643729 1 m 96 42 8 73 96 43 72 81 96 42 8 68 96 43 72 86 96 4 89 56 96 43 72 91 EDM 35 relay Voltage Product number 24 VAC, 5/6 Hz 96 42 7 19 115 VAC, 5/6 Hz 96 42 7 18 23 VAC, 5/6 Hz 96 4 86 88 PR 222 relay Voltage Product number 24VDC,5/6Hz 9643985 Pt1 sensor including cable Product number Cable length MS 6 MMS 2m 9648957 96437784 4m 9648684 96437785 6m 9648958 96437786 8m 9648959 96437787 1 m 96 4 89 6 96 43 77 88 88