Capstone Turbine Heat Recovery Equipment Back Flow Valves Silencers Exhaust Ducting Exhaust Blankets Emissions Controls Manifolds Plate Heat Exchanges
Western EPG Product, Inc. is a manufacture representative for a vast amount of products related to the electric power generation markets for both standby and prime power applications. Our sales engineers have an average of 30 years of experience in this field. This experience allows Western EPG to provide customers with design solutions and recommend parts for new or existing systems. We offer a complete line of mechanical and electrical products that include heat recovery, exhaust ducting, manifolds, plate heat exchangers, back flow valves, silencers and more. Corporate Headquarters Western EPG Products Inc. 16632 Maverick Court Poway, California 92064 Ph: (858) 485-1622 Fx: (858) 876-3144
Heat Recovery Systems Heat Recovery Systems Turbine and compression ignition engines waste enormous amounts of energy due to heat. This heat energy can be recovered by installing a heat recovery system. Heat recovery systems are designed to recapture heat waste given off by these engines, thus overall increasing the output efficiency of the system. Heat recovery systems can use either a steam or water system to recover lost energy due to heat.
Heat Recovery Systems Heat Recovery Silencers Cain Heat Recovery Silencer-Radial (HRS-R) systems are designed to take total exhaust flow, transferring the exhaust heat to the process fluid and minimizing the exhaust noise. HRS-R systems have an integral bypass valve which modulates the damper through a PID loop by monitoring the output process fluid temperature. - Full Stainless Steel Exhaust Bypass Assembly - PID Process Fluid Temperature Control - Vertical or Horizontal Exhaust Flow Connection - Sound Attenuation - Factory Insulation - Easy Access for Total Tube Inspection, Cleaning and Tube Replacement Optional Features: - Modbus Communication - ASME Stamp - Timed Automatic Soot Blower - Extra Thermocouples and Flow Sensors
Heat Recovery Systems Exhaust Steam Generation Cain Exhaust Steam Generation (ESG-1) systems are designed to take the total exhaust flow, transferring exhaust heat to process steam and minimize exhaust noise. The ESG-1 has an internal exhaust bypass valve which modulates the damper through a PID loop monitoring the output steam pressure. - Full Stainless Steel Exhaust Bypass Assembly - PID Process Stream Pressure Controller - Modulating Stainless Steel Exhaust Bypass Damper - Capable of 100% Turn Down - NEMA 12 Control Panel - Circulation Pump - Fined Tube Heat Transfer - ASME Steam Safety Valve - Modulating Feedwater Valve - Excess Steam Pressure Switch - Operating Steam Pressures From 3 to 360 PSIG - 5 to 10 Minute Startup to Full Output
Heat Recovery Systems Plate Heat Exchanger Mueller plate heat exchangers allow customers to isolate simple fluids, viscous solutions or particulates from non-process fluids. This keeps the caustic or fowled liquid separate. Mueller s plate heat exchangers containing up to 200 herringbone-pattern-embossed stainless steel plates. Every other plate is rotated 180 degrees result in the adjacent plate to intersect the ridges of the other plates creating lattice points. These lattice points can be brazed together to create a compact pressure-resistant heat exchanger. - Highly Efficient Heat Transfer Coefficient. - Multiple Alloys Available to Meet Each Applications Exact Needs - Easy Cleaning and Inspection - Compact Size - Cross Contamination Eliminated
Silencers and Support Packages Complete Silencer Package Harco manufacturer is a premier manufacturer of complete silencer packages for the micro turbine market. Standard designs are adapted to meet specific project requirements (sound reduction, space, exhausted ducting paths and aesthetic requirements) Items to Consider: - Stainless Steel or Carbon Steel - Mounting Bands - Extension Tubes - Rain Caps
Silencers and Support Packages Micro Turbine Silencers Harco Manufacturing is a premier manufacturer of micro turbine specific silencers and silencer packages. With a long history of successfully solving the most demanding sound specifications, Harco has developed a high frequency reduction silencer for the turbine market. Depending on the turbine output frequency, reductions of 25 to 38 Db can be expected with minimal back pressure. - Carbon or Stainless Steel - Low Back Pressure - Specific Sound Requirements Available - Side Or and Inlets and Outlets - Flange or Slip Fitting Available
Silencers and Support Packages Standard Exhaust Stack Harco Manufacturing is a complete manufacture of standard exhaust stacks for the Capstone Turbine family. Many designs and options are available. - Carbon or Stainless Steel Components - NFPA Code Designed Wall and Roof Thimbles - Rain Caps - Exhaust Sample Ports
Silencers and Support Packages Silencer and Exhaust Support Structures Harco manufacturing is a complete manufacturer of silencer and exhaust support structures for the standalone C 30 and C 65 family of Capstone products many designs and options are available. The complete package is designed to produce minimum back pressure on the turbine allowing for higher efficiency and maximum sound reduction all through a simple, clean and complete mounting package. - Carbon or Stainless Steel Components - Many Designs Are Available - Rain Caps - Horizontal or Vertical Designs 1 18 2 155 60 44.5 79 3 4 1. 2. 3. 4. Rain Cap, 10" - HD10 1860IRTS-8x10 EI-EO Silencer w/ welded "C" mounts 32812-66 Support Frame 8" pipe Clamp Band PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HARCO MANUFACTURING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HARCO MANUFACTURING IS PROHIBITED. Harco Manufacturing Co. 1000 Industrial Parkway Newberg, OR 97132 phone: 503.537.0600 fax: 503.537.0601 ALL UNITS SHOWN ARE INCHES UNLESS OTHERWISE SPECIFIED: DO NOT SCALE DRAWING DRAWN BY: CHECKD BY: APPROVED BY: MATERIAL: Dennis Gann Joe Harkness DATE TITLE: - Low BP Silencer SIZE A DWG. NO. -32912 SCALE: 1:24 WEIGHT: 5 4 3 2 1 xx Mr/29/12 Mr/29/12 xx REV SHEET 1 OF 1
Silencers and Support Packages Manifold Systems Harco Manufacturing is a leading fabricator of exhaust manifold systems for the Capstone C 30 through C 1000 micro turbine line. A flow simulation software package is used to determine the lowest manifold back pressure design available for the specific application. - Carbon or Stainless Steel Construction - Low Back Pressure Design - East Installation Procedure - Complete System Includes Gaskets, Bolt Hardware, Clamps and Mounting Bands Optional Features: - Output Expansion Joints - Complete Exhaust Duct System - Complete Blanket/Insulation Package - Champion Low Back Pressure Check Valve - Exhaust Stack From The Heat Recovery Unit
Back Flow Valves Back Flow Valves The Champion back flow valve is ideal for preventing reverse exhaust flow to the turbine. This wafer check valve uses a special closing spring designed for the flow of Capstone turbine exhaust. Each valve is sized for the appropriate exhaust flow, temperature, flange size, and back pressure capability of the turbine system. Champion Valves are manufactured in the United States. - Low Back Pressure Design - Stainless Steel Dual Discs And Valve Seats (316 SS) For Corrosion Protection - Rated to 1000ºF - Special Turbine Low Torque Dual Valve Spring - Short Body Length - Valve Cracking Pressure of 0.03 PSI Compliance: NACE Standard API6D
Emission Control Products Emission Control Products Johnson Matthey is a worldwide leader in developing and manufacturing of catalyst and various technologies to control harmful turbine pollutants. CO, VOC, NOx and H2S levels can be controlled through the use of low back pressure catalysts. Special formulations and control systems are available for specific air-quality requirements. - Stainless steel housing - Low back pressure design - Multiple catalyst layer configurations - Combination catalyst and silencer available - Exhaust temperature and back pressure monitor available - Removable catalyst for easy cleaning or replacement
Exhaust Blankets Exhaust Blankets Temptec is a manufacturer of industrial grade exhaust blankets. Temptec's standard exhaust blanket is a 1 inch thick mat with stainless steel mesh and Kevlar thread, having lagging hooks for ease of installation. Computer cuts are made to the material specific to the project requirements. Temptec's exhaust blankets are lightweight, reusable, easy to install and fire resistant. - 1/2 to 2 Mat Thickness - Maximum Mat Insulation Temperature1200ºF - Various Attaching Hardware Options, Including Snaps, D-rings, Draw String And More. - Light Weight - Asbestos Free & Fire Resistant - Major Components Meet Military Grade - Easy Installation And Reusable - Stainless Steel Knitted Mesh And Kevlar Thread