GB real quality made in italy circulation pumps
real quality made in italy E N E R G Y S A V I N G P U M P S PUMPING TECHNOLOGY Due to the diversity of nominal diameters, body lengths and speeds our extremely versatile pumps meet special requirements of the market. The pumps have been designed to pump warm water in central heating systems, however they can be used to pump liquid media in industrial and commercial usage. The devices can also be used in solar installations. All of our circulation pumps share a few common traits: cutting-edge technology, high quality and other advantages. WITA company uses cataphoretic coated cast iron and chromium-nickel steel, which are well-known for their extended durability and versatility. Each pump is delivered with insulation. Essential features of the product Mounting easy mounting thanks to a handy socket pump body equipped with a flat gasket Adjusting perfectly suited to the system needs thanks to a user-friendly control system useful lines (s) Operating silent running low energy consumption high reliability
E N E R G Y S A V I N G P U M P S real quality made in italy WITA Delta HE 35, HE 55 Page 4 WITA Delta Plus UE 35A, UE 55A Page 5 WITA Delta Plus UE 65A, UE 80A Page 6 WITA Delta Plus UE 70A, UE 75A Page 7 WITA Delta HE 75 Page 8 WITA Delta Plus UE 35A Aqua Page 9 WITA UPH 15 Page 10 Energy-saving IMAS WITA pumps In an average household conventional pumps contribute to about 10-15% of total energy consumption. Using an energy-saving WITA IMAS pump helps to reduce energy consumption up to 80%. Compared to a conventional pump, the hydraulic power is almost the same. operating voltage protection type ambient temperature media temperature temperature class system pressure permissible media fittings 1 x 230V 50Hz IP 42 0 C - 40 C 5 C - 110 C (d.h.w. UPH 15: up to 65 C) TF 110 according to CEN 335-2-51 max. 10 bar heating water (according to the VDI 2035 requirements) water-glycol mixture (1:1 max.); (while using an additive of 20% or higher, you need to verify pumping data) pipe union Product advantages high efficiency thanks to the ECM technology energy-saving pump intended for single-family and two-family as well as multi-family houses (up to six families) min. power consumption is 3 W various control modes of the following parameters: delta of p-c (constant differential pressure) and delta of p-v (variable differential pressure) integrated motor protection a pump head can be mounted on almost any pump body of earlier series.
real quality made in italy E N E R G Y S A V I N G P U M P S The "One touch" option allows you to choose from seven different performance curves. Aside from four proportional pressure curves there are three constant speed control s. Pumps are equipped with a night setback function, which is switched on automatically after the installation temperature drops for a particular amount of time. Moreover, it reduces power consumption. The LED display shows the current power consumption, the selected constant speed control and the night setback function status. speed control s power consumption proportional pressure curves curve selection button night setback function Technical data WITA Delta HE 35 HE 55 max. lifting height 4.0 m 6.0 m m a x. f l o w 2.600 l/h 3.200 l/h power consumption P1(W) 3-23 3-38 control function 3 constant speed control s 4 proportional pressure curves operating voltage 1 x 230V 50Hz motor protection external protection is not required protection type IP 42 ambient temperature 0 C - 40 C media temperature 5 C - 110 C temperature class TF110 according to CEN 335-2-51 max. operating pressure 10 bar connection DN 15, DN 20, DN 25, DN 32 body length 110 mm, 130 mm, 180 mm weight about 2.46 kg EEI <= 0.20 WITA Delta HE 35 WITA Delta HE 55 IMAS - Delta UE 35 IMAS - Delta UE 55
E N E R G Y S A V I N G P U M P S Energy-saving pumps real quality made in italy The "One touch" option allows you to choose from six different performance curves. Aside from three proportional pressure curves there are three constant speed control s. The button highlight color indicates the selected. Green color means, that you have selected the lowest speed, whereas red color stands for the highest one. utilizzare le foto della prima pag curve selection switch Te c h n i c a l d a t a WITA Delta max. lifting height max. flow power consumption P1(W) control function UE 35A UE 55A 4.0 m 6.0 m 2.600 l/h 3.200 l/h 3-23 3-38 3 constant speed control s 3 proportional pressure curves operating voltage motor protection protection type ambient temperature media temperature temperature class max. operating pressure connection body length weight EEI WITA -Delta IMAS DeltaPlus PlusUE UE35A 35A 1 x 230V 50Hz external protection is not required IP 42 0 C - 40 C 5 C - 110 C TF110 according to CEN 335-2-51 10 bar DN 15, DN 20, DN 25, DN 32 110 mm, 130 mm, 180 mm about 2.46 kg <= 0.20 WITA -Delta IMAS DeltaPlus PlusUE UE55A 55A
real quality made in italy E N E R G Y S A V I N G P U M P S The "One touch" option allows you to choose from six different performance curves. Aside from three proportional pressure curves there are three constant speed control s. The button highlight color indicates the selected. Green color means, that you have selected the lowest speed, whereas red color stands for the highest one. curve selection switch Technical data WITA Delta Plus UE 65A UE 80A max. lifting height 6.5 m 8.0 m m a x. f l o w 6.470 l/h 7.340 l/h power consumption P1(W) 4-75 4-80 EEI <= 0.24 <= 0.23 rotor rotor with permanent magnet neodymium rotor with permanent magnet control function 3 constant speed control s 3 proportional pressure curves operating voltage 1 x 230V 50Hz motor protection external protection is not required protection type IP 42 ambient temperature 0 C - 40 C media temperature 5 C - 110 C temperature class TF110 according to CEN 335-2-51 max. operating pressure 10 bar connection DN 25, DN 32 body length 180 mm pump body gray cast iron weight about 2.9 kg IMAS WITA - Delta Plus UE UE 65A WITA IMAS - Delta Plus Plus UE UE 80A 80A
E N E R G Y S A V I N G P U M P S Energy-saving pumps real quality made in italy The "One touch" option allows you to choose from six different performance curves. Aside from three proportional pressure curves there are three constant speed control s. The button highlight color indicates the selected. Green color means, that you have selected the lowest speed, whereas red color stands for the highest one. curve selection switch Technical data WITA Delta Plus UE 70A UE 75A max. lifting height 7.0 m 7.5 m m a x. f l o w 4.760 l/h 4.300 l/h power consumption P1(W) 4-79 4-75 EEI <= 0.24 <= 0.24 rotor neodymium rotor with permanent magnet rotor with permanent magnet control function 3 constant speed control s 3 proportional pressure curves operating voltage 1 x 230V 50Hz motor protection external protection is not required protection type IP 42 ambient temperature 0 C - 40 C media temperature 5 C - 110 C temperature class TF110 according to CEN 335-2-51 max. operating pressure 10 bar connection DN 20, DN 25, DN 32 body length 110 mm, 130 mm, 180 mm pump body 130 mm, 180 mm gray cast iron 110 mm brass weight about 2.9 kg IMAS WITA - Delta Plus UE 70A IMAS WITA - Delta Plus UE UE 75A
real quality made in italy E N E R G Y S A V I N G P U M P S The "One touch" option allows you to choose from seven different performance curves. Aside from four proportional pressure curves there are three constant All functions can be controlled with just two buttons. speed control s. Pumps are equipped Aside from six proportional pressure curves there are with a night setback function, which is switched on five constant speed control s. The pump is automatically after the installation temperature drops for equipped with a night setback function, which is switched a particular amount of time. Moreover, it reduces power on automatically after the installation temperature drops consumption. The LED display shows the current power for a particular amount of time. The function additionally consumption, the selected constant speed control reduces power consumption. The LCD display shows and the night setback function status. the current power consumption, the selected constant speed control and the night setback function status. speed control s power consumption proportional pressure curves curve selection button night setback function Technical data WITA Delta HE HE 7535 HE 55 max. lifting height 7.5 4.0 m 6.0 m m m a x a. x f. l o f l w o w 7.850 2.600 l/h l/h 3.200 l/h power consumption P1(W) 5-98 3-23 3-38 control function rotor neodymium 3 constant speed rotor with control permanent s magnet control function operating voltage 54 constant proportional speed pressure control curves s 61 proportional x 230V 50Hzpressure curves operating motor protection voltage 1 external x 230V 50Hz protection is not required motor protection type external IP 42 protection is not required ambient protection temperature type IP 0 C 42-40 C ambient media temperature 0 C 5 C - 40 C - 110 C media temperature class 5 C TF110-110 C according to CEN 335-2-51 max. temperature operating pressure class TF110 10 bar according to CEN 335-2-51 max. operating connection pressure 10 DN bar 15, DN 20, DN 25, DN 32 connection body length DN 11025, mm, DN 130 32 mm, 180 mm body length weight 180 about mm2.46 kg pump body EEI gray <= cast 0.20iron weight about 3.2 kg EEI <= 0.23 WITA Delta HE 35 WITA Delta HE 55 WITA Delta HE 75 IMAS - Delta HE 75
E N E R G Y S A V I N G P U M P S real quality made in italy The pump has been designed for drinking water circulation systems and similar systems used in industry and building technology. This domestic water pump can be used in single-family and two-family houses. In order to prevent water from going back to the pump, it is necessary to mount the check valve on the pump delivery side. Whereas the ball valve should be mounted on the pump suction side to make maintenance easier. The "One touch" option allows you to choose from three different performance curves. The button highlight color indicates the selected. Green: the lowest speed; yellow: medium speed; red: the highest speed. These options allow you to adjust the pump performance to your needs. Technical data WITA Delta Plus UE35 Aqua protection type IP 42 m o t o r p r o t e c t i o n none, the product is short-circuit-proof marking CE number of speeds 3 power consumption 3-23W max. lifting height 4 m m a x. f l o w 2.600 l/h max. operating pressure 10 bar motor casting aluminum rotor shaft ceramic wear ring (rotor) engineering polymer media temperature 5 C - 110 C ambient temperature 0 C - 40 C pump body brass WITA Delta Plus UE 35A Aqua IMAS - Delta Plus HE 35A Aqua
real quality made in italy E N E R G Y S A V I N G P U M P S The pump has been designed for drinking water circulation systems and similar systems used in industry and building technology. This domestic water pump can be used in single-family and two-family houses. In order to prevent water from going back to the pump, it is necessary to mount the check valve on the pump delivery side. Whereas the ball valve should be mounted on the pump suction side to make maintenance easier. The "One touch" option allows you to choose from three different performance curves. The button highlight color indicates the selected. Green: the lowest speed; yellow: medium speed; red: the highest speed. These options allow you to adjust the pump performance to your needs. Technical data WITA Delta Plus UPH 15 protection type IP 42 m o t o r p r o t e c t i o n none, the product is short-circuit-proof marking CE number of speeds 3 power consumption 2.5-8.0 W max. lifting height 1 m m a x. f l o w 800 l/h max. operating pressure 10 bar motor casting aluminum rotor shaft ceramic wear ring (rotor) engineering polymer media temperature 65 C ambient temperature 0 C - 40 C pump body brass IMAS WITA UPH - UPH 15 15
N O T E S real quality made in italy
real quality made in italy NUOVA IMAS Srl 31020 San Zenone degli Ezzelini (TREVISO) ITALY - Street Roma, 163 - Tel. +39 0423 968402 - Fax +39 0423 567216 info@imasradiators.com - www.imasradiators.com