Controladores de Carga Solar - MPPT

Controladores de Carga Solar - MPPT

Séries All-in-one - Luz solar de rua SR-MES60 Name adjustable Default Output power Output current No load loss Charging current Solar panel power PV Voc MPPT efficiency LED driver efficiency Over-voltage protection Over-charging voltage+2v; Charging limited voltage Over-charging voltage+1v; Over-charging voltage Over-charging recovery voltage Over discharge voltage Discharging recovery voltage Current precision ±3%(Load current>300ma) Load output voltage Over-temperature protection(environment) Over-temperature protection(inner) Light- control voltage Environment temperature:80 (Load power decreased) Inner temperature: 120 (Load closed) Light-control delayed time Induction delayed time Working temperature Induction range Vertical: 8M Horizontal: 10M Vertical: 6M Horizontal:7M Waterproof degree Weight Dimension( mm) The probe lead length( mm) Remark: setting: over-charging voltage > over-charging recovery voltage > over-discharging recovery voltage > over-discharging voltage.

TEM. SEN 8 advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point. maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic raise the charging efficiency by 15% to 20% compared with the conventional PWM method. ation of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an ort time. ct boasts an optimum MPPT tracking efficiency of up to 99.9%. digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, ries, etc. oller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging ger than the rated current, the controller will automatically lower the charging power and bring the charging current to el. ous large current startup of capacitive loads is supported. recognition of battery voltage is supported. t indicators and an LCD screen which can display abnormality information help users to quickly identify system faults. l data storage function is available, and data can be stored for up to a year. Séries ML - Regulador de carga e descarga solar de potencia máxima roller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also 151 roller parameters. roller supports standard Modbus protocol, fulfilling the communication needs of various occasions. troller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the rrent will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively controller from being damaged by overheat. a temperature compensation function, the controller can automatically adjust charging and discharging parameters in end the battery's service life. ting protection. ww.srnesolar.com SR-ML2420 210 59.5 17 6XΦ7 9.3 111 143.6 154 131 4XΦ9 4XΦ4.5 Ml2420 Product dimensions:210 151 59.5mm Hole positions:154 131mm Hole diameter:φ3mm Applicable wire: max. 8 AWG Under-Voltage Alarming Restoring Voltage>Under-Voltage Alarming Voltage Discharging Limit Voltage; Rated charging current Rated load current Max. capacitive load capacity Max. photovoltaic system input power MPPT tracking efficiency Operating temperature Weight Altitude Product dimensions ML2 12V/2 0.7 W 9V t 100V(25 Battery Volta 260W/12V 2 2 100 9 >9-3mv/ /2-35 IP 1.4 RS Shuori New Energy/ www.srneso 30 210 151 ML2420 12V/24VAuto 0.7 W to 1.2W 9V to 35V 100V(25 90V(-25 1. With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails Battery Voltage+2V to 75V resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point. 2. A Rated built-in charging maximum current power point tracking algorithm can significantly improve the energy utilization 20A efficiency of photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method. 3. A Rated combination load current of multiple tracking algorithms enables accurate tracking of the optimum working 20A point on the I-V curve in an extremely Max. capacitive short time. load capacity 10000uF 4. The product boasts an optimum MPPT tracking efficiency of up to 99.9%. 5. Advanced Max. photovoltaic digital power system supply technologies input power raise the circuit's energy conversion 260W/12V efficiency to as high 520W/24V as 98%. 6. Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, 98% lithium batteries, etc. 7. The MPPT controller tracking features efficiency a limited current charging mode. When the solar panel power exceeds >99% a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to -3mv/ /2V(default) the rated level. 8. Instantaneous Operating temperature large current startup of capacitive loads is supported. -35 to +45 9. Automatic recognition of battery voltage is supported. IP32 10. LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults. 11. Weight Historical data storage function is available, and data can be stored for up to a year. 1.4Kg 12. The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also RS232 modify controller parameters. 13. Altitude The controller supports standard Modbus protocol, fulfilling the communication needs of various 3000m occasions. 14. The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the Product dimensions 210 151 59.5mm charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat. 15. Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery's service life. 16. TVS lighting protection. The User battery is customized battery. The system s default voltage para battery parameters. When modifying battery charging and discharging pa Overvoltage Disconnect Voltage>Charging Limit Voltage Equalizin Overvoltage Disconnect Voltage>Overvoltage Disconnect Restoring Low Voltage Disconnect Restoring Voltage>Low Voltage Disconnec Under-Voltage Alarming Restoring Voltage>Under-Voltage Alarming Boost Restoring Voltage>Low Voltage Disconnect Restoring Voltage 9 Shuori New Energy/ www.srnesolar.com

TEM. SENSO 1. With the advanced dual-peak multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point. Séries ML - Regulador de carga e descarga solar de potencia máxima 2. A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method. 3. A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an extremely short time. 4. The product boasts an optimum MPPT tracking efficiency of up to 99.9%. 5. Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. 6. Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, lithium batteries, etc. 7. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level. 8. Instantaneous large current startup of capacitive loads is supported. 9. Automatic recognition of battery voltage is supported. 10. LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults. 11. Historical data storage function is available, and data can be stored for up to a year. 12. The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also modify controller parameters. 13. The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions. 14. The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat. 15. Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery's service life. 16. TVS lighting protection. 238 180 173 72.5 4XΦ4.5 4XΦ10 147 72.5 22 6XΦ8 ML2430/ML2440 Product dimensions:238 173 72.5mm Hole positions:180 147mm 123.5 Hole diameter:φ3mm 11 Shuori New Energy/ www.srnesolar.com 168 Applicable wire: max. 8 AWG Shuori New Energy/ www.srnesolar.c SR-ML2430 Rated charging current Rated load current Max. capacitive load capacity Max. photovoltaic system input power MPPT tracking efficiency Operating temperature Weight Altitude Product dimensions ML2430 12V/24VAuto 0.7 W to 1.2W 9V to 35V 100V 25 90V 25 Battery Voltage+2V to 75V 30A 20A 10000uF 400W/12V 800W/24V 98% 99% -3mv/ /2V(default) -35 to 45 IP32 2Kg RS232 3000m 238 173 72.5mm

TEM. SENSO dvanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails ultiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point. aximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic raise the charging efficiency by 15% to 20% compared with the conventional PWM method. tion of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an rt time. t boasts an optimum MPPT tracking efficiency of up to 99.9%. igital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. rogram options are available for different types of batteries including gel batteries, sealed batteries, open batteries, ies, etc. ller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging er than the rated current, the controller will automatically lower the charging power and bring the charging current to l. us large current startup of capacitive loads is supported. Séries ML - Regulador de carga e descarga solar de potencia máxima ecognition of battery voltage is supported. 151 ndicators and an LCD screen which can display abnormality information help users to quickly identify system faults. data storage function is available, and data can be stored for up to a year. ller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also ller parameters. ller supports standard Modbus protocol, fulfilling the communication needs of various occasions. oller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the nt will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively ontroller from being damaged by overheat. a temperature compensation function, the controller can automatically adjust charging and discharging parameters in d the battery's service life. g protection. 210 154 8 131 4XΦ9 4XΦ4.5 59.5 17 6XΦ7 9.3 111 143.6 Ml2440 Product dimensions:210 151 59.5mm Hole positions:154 131mm Hole diameter:φ3mm Applicable wire: max. 8 AWG ww.srnesolar.com SR-ML2440 Shuori New Energy/ www.srnes Ml2440 12V/24VAuto 0.7 W to 1.2W 9V to 35V 100V 25 90V 25 Battery Voltage+2V to 75V 1. With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting Rated in charging multiple peaks current on the I-V curve, the controller is still able to accurately track the 40A maximum power point. 2. A Rated built-in load maximum current power point tracking algorithm can significantly improve the energy 20Autilization efficiency of photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method. 3. A Max. combination capacitive of load multiple capacity tracking algorithms enables accurate tracking of the optimum 10000uF working point on the I-V curve in an extremely Max. photovoltaic short time. system input power 550W/12V 1100W/24V 4. The product boasts an optimum MPPT tracking efficiency of up to 99.9%. 5. Advanced digital power supply technologies raise the circuit's energy conversion efficiency 98% to as high as 98%. 6. Charging MPPT tracking program efficiency options are available for different types of batteries including gel batteries, 99% sealed batteries, open batteries, lithium batteries, etc. -3mv/ /2V(default) 7. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging current Operating is larger temperature than the rated current, the controller will automatically lower the charging -35 power to 45 and bring the charging current to the rated level. 8. Instantaneous large current startup of capacitive loads is supported. 9. Automatic Weight recognition of battery voltage is supported. IP32 2Kg 10. LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults. RS232 11. Historical data storage function is available, and data can be stored for up to a year. 12. Altitude The controller is equipped with an LCD screen with which users can not only check device 3000m operating data and statuses, but also modify Product controller dimensions parameters. 238 173 72.5mm 13. The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions. 14. The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat. 15. Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery's service life. 16. TVS lighting protection.

Séries KIT - Comando Fábrica: Travessa da Zona Industrial - 1, 95 - Rossio 3730-601 Vale de Cambra PORTUGAL. Tel. (+351) 256 472 888 Fax: (+351) 256 425 794 Email: comercial@chatron.pt Url: www.chatron.pt Distribuidor: