Superior by Design. Euro-C2 Aluminum Folding Door System www.euro-wall.com 888.989.EURO (3876)
Specifications Euro-C2 Exterior Aluminum Folding Door System Maximum / Minimum Specifications Max Panel Weight: 240 lbs each panel Min Panel Width: 18 Max Panel Width: 40 Min Panel Height: 32 Max Panel Height: 144 Door Thickness: 2-1/4 Max # of Panels: Unlimited NOTE: When using maximum panel width & height 40 x 144 panel may exceed maximum panel weight of 240 lbs. Calculated weight check should be done. Euro-C2 Extrusions: Extruded Aluminum 6063-T5. Euro-C2 Extrusion Finishes: 1. a) Clear & b) Bronze anodized Class 1. 2. a) Standard Mill Finish available for custom colors from Euro-Wall. 3. a) White and bronze Kynar Coat finish: D2000-AAMA 2605. 4. a) Custom Powder Coat finishes available D3000-AAMA 2604 and 2605. 5. a) Wood Grain finishes (custom): AAMA 2604. Euro-C2 Hardware: Stainless Steel (316SS) Components with Aluminum hinges. Euro-C2 Twinpoint Hardware: Stainless Steel (304SS) & Aluminum Components. Euro-C2 Lever Lock Sets: F-2 Sets Powder Coat over Brass. Euro-DSD Multi-point Door Locks: Faceplate, latch and hooks are 304SS. WARRANTY Euro-Wall 10 Year Warranty Euro-Wall offers a complete 10 Year Warranty. Component deletions and/or substitutions are strictly prohibited. Warranty is void if system has missing or substitute products. Please refer to www.euro-wall.com/ for our full warranty information, terms & conditions, returns & allowances, claims policy, and other general information. 3 STANDARD FRAME & DOOR PANEL FINISHES White Clear Bronze Anodized, Powder Coat or Kynar are available 40 Custom Wood Grain finishes available (not shown) 30 Solid Colors: Custom powder coat finishes available (not showwn) 40 Metallic Custom Powder coat finishes available (not shown) NOTE: The colors shown in this brochure give only an approximation of color and finish. Actual colors and finishes may vary. 1
Folding door panel options Code Opening configuration 2l 2R 2l1r 1l2r 3l 3R 3l1r 1l3r 4l 2l2R 4l1r 3l2r 5l NOTE: Please note that the configurations below are just a few examples of the limitless possibilities for Euro-Wall Folding Door layout options. 3l3r 7l 4l3r 5l2r 5l5r 5l7r 5l9r 5l11r 2
Outswing Inswing Euro-C2 Cross Section 3
Euro-C2 Glazing details 0.09 1 Insulated Glass 3/16 5/8 3/16 Laminated Monolithic Impact Glass 1/4 1/4 Sentryglas Interlayer Sentryglas Interlayer 1 9/16 Panel Stile Panel Stile Top & Bottom Rail Top & Bottom Rail Insulated Impact Glass 11/16 Glass Bite 1/8 Tempered 1/4 Annealed 1 O.A. SUPERIOR by design 0.090 Sentryglas 1/4 Annealed 19/64 11/16 3/8 finished floor line 7/16 19/64 brushed sweep brushed sweep 1/2 3/8 11/16 7/8 7/16 Panel to Floor Channel Detail finished floor line blockout flooring for sill channel Panel to ADA Sill Detail finished floor line 4
Features of the euro-c2 Folding Door System 3L1R NOTE: A, B & C available in white, satin, black & bronze powder coat finishes. top pivot door panel corner key active lock set B intermediate carrier 8 C2 multi-pont astragal wall pivot weatherseals 8 top pivot 6 8 9 C 4 bottom pivot hinge with handle 7 1-3 5 10 concealed intermediate guide Euro-C2 hinge gasket lever lock set A twinpoint bottom pivot weatherseals Multi-point Door Lock (3 hooks) + top & bottom shootbolts = 5 point 3 Hook Model for door heights of up to 8 4 Hook Model for door heights higher than 8 1. 11. All aluminum profiles are available in anodized class 1 acid etch clear & bronze 22. All aluminum profiles are available in powder coat or WCI coat finishes 33. Door panels designed for laminated impact and IG and IG impact glass A Lever Lock Set 2. 44. Twinpoint hardware in stainless steel (304SS) 3. 4. 5. Door panels designed to hold impact lamnible, I-G and I-G Impact 55. Door panel corner key for strength and security Twinpoint hardware in stainless steel (304SS) 66. Dual weatherstripping on all door panels and frames Door Panel Corner Key for strenght and security 77. 6063-T5 aluminum profiles in all Euro-C2 extrusions 6. Dual weatherseals on head, jamb, sill & between each panel 88. Matching color lever lock sets for panels and frame 7. 99. Stainless steel (304SS) 5 or 6 point MK2 multi-point door lock 8. Color coordinated lever lock sets for active & adjoining panels B Carrier & Hinge C Twinpoint Handle 9. Five 5 point or six point MK2 Multi-point door lock (304SS) Stainless Steel
Options Twinpoint assembly is used in securing each pair of folding door panels in the closed position. Not used on the swing (active) panel. FINISH OPTIONS 1 2 3 4 White Powder Coat Satin Aluminum Powder Coat Clear Anodized Bronze Anodized DF3 (Aluminum TwinPoint Swing Handle) Finishes Euro Series Lever Lock Set Multi-Point Lock Euro Intermediate Carrier (Shown) Available Finishes 1, 2, 4, 5 Available Finishes (Powder Coat over Brass) 1, 2, 4, 5 Available Finishes (Powder Coat over Brass) 1, 2, 4, 5 Available Finishes (Hinges) 1, 3, 4, 5 NOTE: The colors shown in this brochure give only an approximation of color and finish. Actual colors and finishes may vary. SUPERIOR by design 6
Test Performance Met all requirements AAMA / WDMA / CSA 101 / I.S.2 / A440-08 NAFS-08 Air Infiltration: A2 Water Leakage Resistance: DP45 or PG45 Wind Load Resistance: DP45 SUP ERIOR BY DESIGN 888.989.EURO (3876) Euro-Wall Systems, LLC 24100 Tiseo Blvd Port Charlotte, FL 33980 www.euro-wall.com info@euro-wall.com Proud Member of the American Architectural Manufacturers Association.