RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application Technical data Medium: Filtered, lubricated or nonlubricated, compressed air Maximum Operating Pressure: 25 psig (8.6 bar) Temperature Range: Standard Nitrile Seals: 32 to 60 F (0 to 72 ) Lubrication: ll RP cylinders are prelubricated during assembly with a Teflon based grease for nonlube service and long life. Materials ylinder Body: 304 Series stainless steel Head and ap: elrin cetal Resin Piston Rod: 300 Series chrome plated stainless steel Piston: nodized aluminum alloy or stainless steel Rod & Piston Seals: Nitrile Mounting ccessories: 300 Series stainless steel elrin is a registered trademark of.i. u Pont de Nemours and ompany for its brand of acetal resin. Options selector RP 06 x 3.250 - N - PS Series RP Series elrin end cap RP RP Series elrin with *RP cology Seals* * cology version not available on 9/6" bore RP cylinder Bore Size 9/6" 056 3/4" 075 -/6" 06 -/2" 50 2" 200 Stroke Increments of /6" up to 36" dditional Options lternate female thread FT (_) (Specify thread type) iton seals HT** Switch rail and position M, M2, M3, M4 Side ported end cap P (N mount only) lternate port location PL(_) Plain rod end PR Magnetic piston PS Rod extension over std. RX(_) (specify additional length) Rod wiper RW lternate male thread TM (_) (Specify thread type) Thread extension over std. TX(_) (specify additional length) Bumper both ends UB Mounting Options (all models are double acting) Nose N ouble nd (with pivot hole) ouble Rod nd R ** iton seals are for chemical compatibility applications, and are not available in cology -/6" bore Rod wiper not available on 9/6" bores Our policy is one of continued research and development. We therefore reserve the right to amend, 9/09 N/US - 5.4.720.0
Roundline Plus Stainless Steel ctuators RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators The Norgren RP Series ylinder utilizes a stainless steel body, a stainless steel rod, and elrin (acetal resin) end caps for corrosion resistance. This cylinder is designed to endure a variety of environmental conditions. The RP Series construction provides resistance to moisture, various solvents, and many other neutral chemicals. The Norgren RP Series is ideal in corrosive environment applications. dditionally, the Norgren RP Series ylinder is the only elrin end cap cylinder in the industry to offer the patented impact dampening cology Seal Technology. The cology Seal option, used in conjuction with a fixed cushion, eliminates the bacteria-collecting cushion screw orifice found in competing adjustable cushion model cylinders. 2 3 Head and ap: elrin (acetal resin) Piston Rod: hrome plated stainless steel Tube: Stainless steel 4 5 6 Piston: nodized aluminum (stainless steel on 9/6" bore R model) Piston Seals: Nitrile (iton optional) Optional magnet on piston for position sensing 5 2 3 6 4 elrin is a registered trademark of.i. u Pont de Nemours and ompany for its brand of acetal resin. For detailed technical specifications on the properties of elrin, please contact upont (www.dupont.com). N/US- 5.4.720.02 Our policy is one of continued research and development. We therefore reserve the right to amend, 9/09
Roundline Plus Stainless Steel ctuators ouble cting Nose Mount (N) + STROK K MM (ROSS TS) cology Bore K or P Bumpers MM 9/6" (056) 0.50 -- -- 0.6 #0-32 0.38 0.50 0.9 #0-32 2.28 -- 2.4 0.9 7/6-20.434/.437 0.06 0.38 3/4" (075) 0.50 -- -- 0.8 /8 NPT 0.50 0.63 0.9 /4-28 2.97 3.4 2.97 0.25 5/8-8.62/.624 0.09 0.47 -/6" (06) 0.50 0.3 0.25.3 /8 NPT 0.50 0.88 0.9 5/6-24 3.25 3.50 3.38 0.3 5/8-8.62/.624 0.09 0.56 -/2" (50) 0.75 0.25 0.38.56 /8 NPT 0.63 0.88 0.25 7/6-20 3.69 3.88 3.82 0.44-4.996/.999 0.09 0.63 2" (200) 0.88 0.38 0.50 2.08 /4 NPT 0.8.25 0.3 /2-20 4.69 5.06 4.94 0.63 -/4-2.37/.374 0.3 0.73 PS (Magnetic Piston) length adder: -/6" & -/2" bores = 0.25". 9/6", 3/4", and 2" bores = 0.25". When PS (magnetic piston) and cology options are ordered in combination, use cology length only - do not add extra length for the magnet. ouble cting Pivot Mount () + STROK L M B MM (ROSS TS) Bore B L cology Bumpers M MM 9/6" (056) 0.50 -- 0.3 0.6 -- 0.6 #0-32 0.38 0.38 #0-32 0.25 2.56 2.69 0.9 0.9 7/6-20.434/.437 0.06 0.38 3/4" (075) 0.50 -- 0.38 0.25 -- 0.8 /8 NPT 0.63 0.50 /4-28 0.34 3.75 3.75 3.75 0.28 0.25 5/8-8.62/.624 0.09 0.47 -/6" (06) 0.50 0.3 0.38 0.25 0.25.3 /8 NPT 0.63 0.50 5/6-24 0.34 3.84 3.84 3.97 0.28 0.3 5/8-8.62/.624 0.09 0.56 -/2" (50) 0.75 0.25 0.63 0.38 0.38.56 /8 NPT 0.78 0.63 7/6-20 0.50 4.38 4.38 4.50 0.38 0.44-4.996/.999 0.09 0.63 2" (200) 0.88 0.38 0.74 0.38 0.50 2.08 /4 NPT.03 0.8 /2-20 0.56 5.63 5.63 5.88 0.44 0.63 -/4-2.37/.374 0.3 0.73 PS (Magnetic Piston) length adder: -/6" & -/2" bores = 0.25". 9/6", 3/4", and 2" bores = 0.25". When PS (magnetic piston) and cology options are ordered in combination, use cology length only - do not add extra length for the magnet. ouble cting ouble Rod nd Mount (R) + (2 x STROK) Ø MM Ø MM (ROSS TS) (ROSS TS) Bore cology Bumpers MM 9/6" (056) 0.50 -- -- 0.6 #0-32 0.38 #0-32 2.94 3.06 0.9 7/6-20.434/.437 0.06 0.38 3/4" (075) 0.50 -- -- 0.86 /8 NPT 0.50 /4-28 4.00 4.00 4.00 0.25 5/8-8.62/.624 0.09 0.47 -/6" (06) 0.50 0.3 0.25.3 /8 NPT 0.50 5/6-24 4.00 4.00 4.50 0.3 5/8-8.62/.624 0.09 0.56 -/2" (50) 0.75 0.25 0.38.56 /8 NPT 0.63 7/6-20 5.3 5.3 5.25 0.44-4.996/.999 0.09 0.63 2" (200) 0.88 0.38 0.50 2.08 /4 NPT 0.8 /2-20 6.56 6.56 6.8 0.63 -/4-2.37/.374 0.3 0.73 PS (Magnetic Piston) length adder = 0.25" for all bore sizes. When PS (magnetic piston) and cology options are ordered in combination, use cology length only - do not add extra length for the magnet. N/US- 5.4.720.03
Roundline Plus Stainless Steel ctuators Stainless steel Rod levis (includes nut and pin) L H LH Ø B T H Bore P/N B H L LH T 9/6" (056) R-056 0.9 0.9 0.94 0.75 0.38 0.56 0.56 #0-32 0.3 3/4" (075) R-075 0.25 0.25.9 0.94 0.50 0.69 0.69 /4-28 0.6 -/6" (06) R-06 0.25 0.25.9 0.94 0.50 0.69 0.69 5/6-24 0.9 -/2" (50) R-50 0.38 0.38.69.3 0.75 0.94.03 7/6-20 0.25 2" (200) R-200 0.38 0.38.69.3 0.75 0.94.03 /2-20 0.3 Stainless steel Foot Bracket B B Ø F Bore P/N B B F 9/6" 056 RPFB-056 0.69 0.38 0.97 0.3 0.44 0.9.38 0.09 0.56 0.84 3/4" 075 RPFB-075.00 0.56.44 0.23 0.63 0.27.88 0.2 0.8.38 -/6" 06 RPFB-075.00 0.56.44 0.23 0.63 0.27.88 0.2 0.8.38 -/2" 50 RPFB-50.50 0.75.88 0.72.00 0.28 2.50 0.2.00.75 2" 200 RPFB-200.63.00 2.25 0.6.38 0.34 3.3 0.25.50 2.50 N/US- 5.4.720.04
Roundline Plus Stainless Steel ctuators imensions in inches Stainless steel Pivot Bracket (includes pin) M B Ø B B F Ø Bore P/N B B B F M 9/6" (056) PB-056 0.44 0.3 0.50 0.6 0.20 0.75 0.3 0.76 0.06 0.56 0.20 3/4" (075) PB-075 0.63 0.38 0.75 0.25 0.22.3 0.9.9 0.2 0.88 0.3 -/6" (06) PB-075 0.63 0.38 0.75 0.25 0.22.3 0.9.9 0.2 0.88 0.3 -/2" (50) PB-50 0.9 0.63.00 0.38 0.28.50 0.25.75 0.3.38 0.38 2" (200) PB-200.25 0.75.00 0.38 0.28.50 0.25.75 0.25.38 0.38 Stainless steel Mounting Nut T N Bore P/N N T Maximum torque (in-lbs.) 9/6" (056) 52025-SS 0.69 7/6-20 0.25 4 3/4" (075) 52027-SS 0.94 5/8-8 0.38 2 -/6" (06) 52027-SS 0.94 5/8-8 0.38 2 -/2" (50) 52030-SS.50-4 0.55 30 2" (200) 52085-SS.88 -/4-2 0.50 45 N/US- 5.4.720.05