Cemented Carbide Saw Tips for Forestry & Woodworking T& D Materials supplies whole cemented tungsten carbide saw blades, cemented tungsten carbide tipped saw blades, strobe blanks for circular saws and rectangular strip blanks. T&D manufactures different grades of cemented carbide tips for different working materials like frozen wood, soft wood, hard wood, laminated wood, MDF, and HDF. In addition to tungsten carbide tips, we also supply cermet saw tips. We supply the following materials for saw tips. All other properties requirements are available. Customer fabrication is available upon customer request. ISO HARDNESS HRA DENSITY g/cc BINDER % TRS VALUE psi K 01 93.80 15.25 3 305,000 K 10 92.90 15.00 5 333,000 K 20 92.30 14.80 6 406,000 K 40 89.10 14.35 11 464,000
GRADES, PROPERTIES, AND RECOMMENDED APPLICATIONS Physical & mechanical properties Grade Density g/cm 3 Hardness HRA Typical values TRSN/mm 2 (Sample B) YG6 14.95 91.0 2580 YG8 14.74 90.2 2710 YG6X 14.93 91.9 2480 YG6A 14.89 92.7 2350 YG8C 14.69 89.1 2850 YG11C 14.32 87.8 2940 YL10.2 14.45 91.8 2880 YD25 14.38 91.5 2850 YM80 14.76 90.9 2590 YS2T 14.45 92.4 2380 YS8 14.05 93.5 2170 Recommended applications Universal grades widely used in machining tools for castiron,nonferrous metals and their alloys and nonmetal materials, wear parts,and tools for machining other alloys Suitable for the semi-finishing of hard castiron,nonferrous metals and their alloys, and also suitable for the semifinishing and finishing of common castiron and high manganese steel work-pieces and for other tools. Mainly used for rock drilling, auger tips and well drilling tools and at the same time for drilling stone walls,cement in construction and installation work,and for machining stone materials. Mainly used for manufacturing strips and disc cutters and also for other tools. Mainly for manufacturing strips and also for other tools. Mainly used for disc cutters and also for other tools Suitable for the rough and finishing of stainless steel,finishing of high strength steel,finishing and semi-finishing of hardened steel,and the machining of iron based heat resistant alloys and glass articles.
ORDER PRODUCTS Type 001 002 003 004 005 006 007 L 22.1 25.2 28.4 31.6 34.8 37.9 41.1 L1 3.2 3.2 6 6 6 6 6 L2 18.9 22 8.09 12 12 12 12 L3 4.66 6.31 14.8 9.26 9.38 11.53 13.42 H 11.6 13.2 10 16.4 16.4 18 19.6 h 11.6 13.2 12.07 10 10 10 10 r 11.6 11.77 12.07 13 15.9 15.73 16.02 R 40 40 60 60 60 60 60
ORDER PRODUCTS Type 001 002 003 004 005 006 007 008 009 010 A 2 3 3 4.5 4.8 6 8 10.5 14.6 20.5 B 5.2 6 7.5 9.2 10.7 12.3 14 17.2 20.3 26.6 L 13.5 13.5 16.5 16.5 16.5 16.5 16.5 16.5 15.5 15.5 H 1.2 1.2 1.2 1.5 1.5 1.5 2 2 2 2 R 50 50 50 50 50 50 40 40 40 40
ORDER PRODUCTS Type 001 002 003 004 005 006 007 L 7.8 9.4 11 12.5 14.1 15.7 17.3 H 17 21 24 28 31 34 36 B 9 12.2 15.4 18.5 21.6 24.8 28 h 4 4.4 4.3 4.75 4.7 4.6 4 r 2.38 3.17 3.56 3.96 5.55 6.35 7.15 R 40 40 40 40 40 50 60 B1 4.24 5.85 7.44 9 10.5 12.1 13.7
ORDER PRODUCTS Type 001 002 003 004 005 006 A 3.9 4.7 5.1 5.5 5.9 6.3 H 22.2 25.4 28.6 31.8 34.9 36.5 h 4.33 5.8 6.67 7.47 8.17 8.97 h1 2.6 2 2.3 2.7 2.7 2.3 h2 2 2 2 2 2.5 2.5 r 2.38 3.17 3.56 3.96 4.36 4.75 R 40 10 40 50 60 60
ORDER PRODUCTS Type 001 002 003 004 005 006 007 L 22.1 25.2 28.4 31.6 34.8 37.9 41.1 L1 3.2 3.2 6 6 6 6 6 L2 18.9 22 6 6 6 6 6 L3 19.72 22.82 26.02 29.22 23.42 34.73 37.93 H 10 11.6 13.2 14.8 16.4 16.4 16.4 h1 6.36 7.69 9.01 10.33 11.65 10.72 10.44 h2 10 11.6 10 10 10 10 10 r 2.38 2.38 2.38 2.38 2.38 3.17 3.17 R 40 10 60 60 60 60 60
ORDER PRODUCTS Type 001 002 003 004 005 006 007 L 12.7 16.2 17.8 19.4 21 22.6 25.6 L1 7.3 9.9 10.7 11.5 12.3 13 14.6 L2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 L3 3.7 4.75 4.75 5.55 7.1 7.95 9.4 H 26 29 29 32.2 38.5 41.7 48 h1 5.2 5.2 5.2 5.2 5.2 5.2 5.2 h2 3.96 4.76 6.2 5.55 7.92 9.5 11.1 h3 1.6 1.6 2.38 2.38 2.38 2.38 2.38 h4 2.38 3.17 3.17 3.17 3.96 4.75 5.55 h5 3.96 4.76 5.55 5.55 7.15 7.96 9.52 h6 3.4 6.4 6.2 2.38 9.5 12.6 18 r1 1.98 2.38 2.38 3.96 3.96 4.75 5.55 r2 2.38 3.17 3.17 3.96 3.96 4.75 5.55 r3 3.96 4.76 5.55 6.35 7.15 7.96 9.52 r4 8.73 9.52 10.3 11.1 11.9 12.7 14.3 R1 0 20 25 25 30 30 35 R2 0 20 25 25 25 25 25 R3 40 40 50 50 60 60 60
ORDER PRODUCTS Type 001 002 003 004 005 006 007 008 009 010 A1 3 3.5 3.5 4 5 6 6 7 8 10 A2 3 5 7 9 9.5 10 11.5 13 15 19 B 9.5 12 14.5 17 18.5 20 21.5 24 27 33 B1 5.3 7 8.5 10 11.5 13 15 16.5 19.5 26 L1 2.3 3 4 5 5 5 5 6 7 8 L2 2.6 3.6 5.2 6.4 6.5 7.8 8.3 9.0 9.5 10.4 L3 5 5 5 6 6 6 6 6 7 7 L 9 9.5 11 12.5 14 14.5 15 15.5 15.5 16.5 R1 5.7 7.5 8.7 10.2 12.7 14.3 16.5 17.75 23.35 36.1 R2 6.35 7.9 9.5 10.3 11.1 12.7 14.3 15.9 19.1 25.4 R3 40 40 40 40 40 40 40 40 40 40
ORDER PRODUCTS Type A B C R 01-0 10 6 3 4 01-1 13 9 3 5 01-2 16 11 4 5 01-3 19 13 5 5 01-4 22 15 6 8 01-5 25 17 7 8 01-6 30 20 8 8
ORDER PRODUCTS Type A B C 02-0 10,6,3 02-1 13,9,3 02-2 16,11,4 02-3 19 13 5 02-4 22,15,6 02-5 25,17,7 02-6 30,20,8
RECOMMENDED GRADES FOR CEMENTED CARBIDE CUTTERS Physical & mechanical properties Grade Density g/cm 3 Hardness HRA Typical values TRSN/mm 2 (Sample B) YS2T 14.45 92.4 2380 YL10.2 14.45 91.8 2880 Recommended applications An ultra fine cemented carbide with tungsten powder and binder cobalt. Good toughness and wear resistance, suitable for low speed cutting allowing a big rake angle, ensuring the sharpness of the edges, bearing a heavy cutting force and achieving good surface finish. With good transversal rupture strength and wear resistance, it is suitable for low-speed rough turning and milling of heat resistanct alloys, titanium alloys and of plastics glass well.
Designation of the Types : ΦD Φd H TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS Type Dimensions O.D(D) I D(d) Thickness(H) Φ11 Φ5 4.3 11 5 4.3 Φ14 Φ5 3.5 14 5 3.5 Φ14 Φ7.5 3.5 14 7.5 3.5 Φ14 Φ7.5 53 14 7.5 5 Φ15.5 Φ7.8 0.8 15.5 7.8 1.8 Φ15.5 Φ7.8 1.0 15.5 7.8 1.0 Φ15 Φ5.5 3.5 15 5.5 3.5 Φ16.5 Φ6.5 5 16.5 6.5 5 Φ17 Φ5.2 1.0 17 5.2 1.0 Φ17 Φ5.2 1.2 17 5.2 1.2
TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ17 Φ5 1.0 17 5 1.0 Φ17 Φ7.2 1.0 17 7.2 1.0 Φ17 Φ7 1.0 17 7 1.0 Φ18.5 Φ7.8 0.8 18.5 7.8 0.8 Φ18.5 Φ7.8 1.0 18.5 7.8 1.0 Φ18 Φ7 1.0 18 7 1.0 Φ19 Φ5.2 1.0 19 5.2 1.0 Φ19 Φ7 1.0 19 7 1.0 Φ20 Φ4 3 20 4 3 Φ20 Φ8.5 3.5 20 8.5 3.5 Φ20 Φ9 3.5 20 9 3.5 Φ20.5 Φ7.8 0.8 20.5 7.8 0.8 Φ20.5 Φ7.8 1.0 20.5 7.8 1.0 Φ21 Φ7 1.0 21 7 1.0 Φ22 Φ5.2 1.0 21 5.2 1.0 Φ25 Φ12 1.0 25 12 1.0 Φ26 Φ7.2 1.0 26 7.2 1.0
TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ26 Φ7.2 1.2 26 7.2 1.2 Φ26 Φ7.2 1.5 26 7.2 1.5 Φ26 Φ7.2 2.0 26 7.2 2.0 Φ26 Φ7.2 2.5 26 7.2 2.5 Φ26 Φ7.2 3.0 26 7.2 3.0 Φ26 Φ7.2 3.3 26 7.2 3.3 Φ26 Φ7.2 3.3 26 7.2 3.3 Φ26 Φ7.2 5.3 26 7.2 5.3 Φ30 Φ12 1.0 30 12 1.0 Φ33 Φ7.2 1.2 33 7.2 1.2 Φ33 Φ7.2 1.5 33 7.2 1.5 Φ41.7 Φ11.2 3.0 41.7 11.2 3.0 Φ41.7 Φ11.2 3.5 41.7 11.2 3.5 Φ47 Φ14.5 1.0 47 14.5 1.0 Φ47 Φ14.5 1.2 47 14.5 1.2 Φ52 Φ12 1.5 52 12 1.5 Φ52 Φ12 6.5 52 12 6.5
TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ52 Φ12 7.5 52 12 7.5 Φ57 Φ24.4 2.85 57 24.4 2.85 Φ61.5 Φ11.5 1.2 61.5 11.5 1.2 Φ61.5 Φ15 1.2 61.5 15 1.2 Φ64 Φ14 2.0 64 14 2.0 Φ64 Φ14 2.5 64 14 2.5 Φ64 Φ14 3.0 64 14 3.0 Φ64 Φ14 3.4 64 14 3.4 Φ64.5 Φ15 1.2 64.5 15 1.2 Φ65 Φ14 1.4 65 14 1.4 Φ65 Φ14 1.5 65 14 1.5 Φ72 Φ12 1.5 72 12 1.5 Φ72 Φ15 1.2 72 15 1.2 Φ72 Φ15 1.8 72 15 1.8 Φ72 Φ15 2.3 72 15 2.3 Φ72 Φ15 3.4 72 15 3.4 Φ73 Φ14.5 1.5 73 14.5 1.5
TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ73 Φ21 1.4 73 21 1.4 Φ73 Φ24 1.2 73 24 1.2 Φ73 Φ24 1.5 73 24 1.5 Φ73 Φ24 2.0 73 24 2.0 Φ76 Φ20.5 2.0 76 20.5 2.0 Φ76.5 Φ15 1.5 76.5 15 1.5 Φ76.5 Φ15 2.0 76.5 15 2.0 Φ76.5 Φ20.5 1.2 76.5 20.5 1.2 Φ76.5 Φ20.5 1.5 76.5 20.5 1.5 Φ76.5 Φ20.5 2.0 76.5 20.5 2.0 Φ76.5 Φ20.5 2.5 76.5 20.5 2.5 Φ76.5 Φ20.5 3.0 76.5 20.5 3.0 Φ76.5 Φ24 1.5 76.5 24 1.5 Φ76.5 Φ24 2.0 76.5 24 2.0 Φ76.5 Φ24 2.5 76.5 24 2.5 Φ76.5 Φ24 3.0 76.5 24 3.0 Φ78 Φ23 3.5 78 23 3.5
TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ83 Φ16 1.4 83 16 1.4 Φ83 Φ20 1.4 83 20 1.4 Φ83 Φ20.5 1.5 83 20.5 1.5 Φ83 Φ24 1.3 83 24 1.3 Φ83 Φ24 1.5 83 24 1.5 Φ83 Φ24 1.8 83 24 1.8 Φ83 Φ24 2.0 83 24 2.0 Φ83 Φ24 2.3 83 24 2.3 Φ83 Φ24 2.5 83 24 2.5 Φ83 Φ30 1.5 83 30 1.5 Φ83 Φ30 1.8 83 30 1.8 Φ83 Φ30 2.0 83 30 2.0 Φ83 Φ30 2.2 83 30 2.2 Φ83 Φ30 2.5 83 30 2.5 Φ83 Φ30 3.0 83 30 3.0 Φ102 Φ20 1.5 102 20 1.5 Φ102 Φ20 2.0 102 20 2.0
TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ102 Φ20 2.3 102 20 2.3 Φ103 Φ24 2.8 103 24 2.8 Φ103 Φ30 1.5 103 30 1.5 Φ103 Φ30 2.0 103 30 2.0 Φ103 Φ30 2.5 103 30 2.5 Φ103 Φ30 2.8 103 30 2.8 Φ103 Φ30 3.0 103 30 3.0 Φ103 Φ30 3.3 103 30 3.3 Φ103 Φ30 4.0 103 30 4.0 Φ103 Φ30 4.5 103 30 4.5 Φ103 Φ30 6.3 103 30 6.3 Φ108 Φ30 1.5 108 30 1.5 Φ108 Φ30 1.8 108 30 1.8 Φ108 Φ30 2.0 108 30 2.0 Φ108 Φ30 2.5 108 30 2.5 Φ108 Φ30 3.0 108 30 3.0 Φ112 Φ30.5 1.3 112 30.5 1.3
TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ113 Φ30 1.5 113 30 1.5 Φ113 Φ30 2.0 113 30 2.0 Φ113 Φ30 2.5 113 30 2.5 Φ113 Φ30 3.3 113 30 3.3 Φ113 Φ30 4.3 113 30 4.3 Φ115 Φ30 1.5 115 30 1.5 Φ115 Φ30 1.8 115 30 1.8 Φ115 Φ30 2.0 115 30 2.0 Φ115 Φ30 2.5 115 30 2.5 Φ118 Φ22 1.5 118 22 1.5 Φ118 Φ22 2.0 118 22 2.0 Φ118 Φ22 2.5 118 22 2.5 Φ118 Φ30 1.5 118 30 1.5 Φ118 Φ30 2.0 118 30 2.0 Φ128 Φ23 1.5 128 23 1.5 Φ128 Φ23 2.0 128 23 2.0 Φ128 Φ23 2.5 128 23 2.5 Φ203 Φ68 4.3 203 68 4.3 Φ250 Φ70 3.5 250 70 3.5