PATCH FITTINGS. Universal, ARCOS & EA Patch Fittings for Tempered Glass Assemblies

PATCH FITTINGS Universal, ARCOS & EA Patch Fittings for Tempered Glass Assemblies

PATCH FITTINGS FOR TEMPERED GLASS ASSEMBLIES CONTENTS DORMA Patch Fittings Overview 3 Patch Fitting Selection Chart 4 Standard Assembly Types 5 Universal Patch Fittings General Information 6 Type Selection 7 Universal Patch Fittings 8 Universal Connectors 10 Glass Preparation Details 15 Construction 20 ARCOS Universal Patch Fittings General Information 21 Type Selection 22 ARCOS Universal Patch Fittings 23 ARCOS Universal Connectors 25 Glass Preparation Details 26 Construction 27 DORMA EA Patch Fittings General Information 28 DORMA EA Patch Fittings 30 DORMA EA Top Centers for Wood and Steel Frames 32 Glass Preparation Details 33 Accessories Floor Bearings, Floor Sockets 34 Pivots 35 Fixing Plates, Threaded Rod, Patch Lock 36 Fin Usage and Assembly 38 Mechanical Channel, Clamping Fittings 39 Clip-on Cover Profile, End Caps 39 2 DORMA

PATCH FITTINGS OVERVIEW DORMA PATCH FITTINGS For tempered glass assemblies DORMA offers one of the most comprehensive ranges of patch fittings available today, providing tempered glass assemblies that are technically sound and visually attractive. This range gives the architect or designer a wide variety of creative options for expression with tempered glasseither internally or externally. All DORMA fittings are based on a modular system, consisting of a base unit, functional inserts, and clip-on covers in a wide range of finishes. Glass preparations are quick and easy. Quality materials and thorough workmanship guarantee a long service life and a reflection of excellence for years to come. In addition to standard patch fitting solutions found in the DORMA USA, Inc offering, the DORMA family may have additional products available to address unusual, curved, angled or other application challenges. Please contact our Customer Service or Technical Service teams for assistance with application solutions not found in America's literature or price lists. Additional cost and lead-time may be required. General care instructions The surface finishes of the fittings are not maintenance-free and should be cleaned according to their material and design... For metallic surfaces (anodized finishes, stainless steel), please use only appropriate cleaning agents without abrasive additives... For varnished surfaces, please use only appropriate solventfree cleaning agents... Brass surfaces (without surface protection) have to be treated occasionally with an appropriate maintenance agent to avoid tarnishing. DORMA Universal With their broad range of options and configurations, DORMA Universal patch fittings are ideal for almost any design. Tempered glass assemblies are provided with fixed parts in a variety of arrangementswith corner fittings or fin fittings at different angles, and with double or single-action doors in single-leaf or double-leaf designs. ARCOS Universal The ARCOS Universal range offers patch fittings and connector hardware for transoms and sidelites, and fin fittings for particularly large systemswith the curved arc motif of the ARCOS design always incorporated into each component. Gentle reflections that change with the planes give both the glass and its fittings a uniform appearance. DORMA EA DORMA EA patch fittings are characterized by their slim, neat shape and skillful Euro hinge design. This com prehensive range of fittings allows the transparent elegance of singleacting doors to reach their full potentialwhether hung in frames or integrated into tempered glass openings. DORMA 3

PATCH FITTINGS SELECTION CHART PATCH FITTING SELECTION CHART Applications & features DORMA Universal ARCOS Universal DORMA EA For external assemblies +++ +++ +++ For internal assemblies +++ +++ +++ Accessories 3/8" (10), 3/8" (10), For standard tempered glass applications +++ +++ +++ For individually designed assemblies with corner fittings, fin fittings, etc. +++ + + +++ For double-acting doors For single-acting doors Glass thickness in (mm) 3/8" (10), 1/2" (12) 1 1/2" (12) 1 1/2" (12) 1 Max. door weight lb (kg) 275 lb (125 kg) 220 lb (100 kg) 220 lb (100 kg) Max. door width in (mm) 48" (1219) 43" (1092) 43" (1092) Materials & finishes Aluminum, silver anodized, EV1 (101) Similar to satin stainless (107) Aluminum, dark bronze anodized (108) Black anodized (109) Aluminum, EV1 (114) Special anodizing (199) Special clad plated (299) +++ Suitable + Partially Suitable Standard Optional 1 Under certain circumstances also 5/8" (16) and 3/4" (19) glass thickness 2 Available upon request NOTE: All measurements are shown in inches followed by (millimeters); for example: 3/8" (10). Brass, polished (503) 2 2 Brass, satin chrome plated (500) 2 Satin brass w/o lacquer (599) Satin bronze no lacquer (600) Polished bronze w/o lacquer (601) Stainless steel, satin (700) Stainless steel, polish (701) Special painter powder coating (999) 2 Page 6 21 28 34 4 DORMA

PATCH FITTINGS STANDARD ASSEMBLY TYPES STANDARD ASSEMBLY TYPES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 DORMA 5

PATCH FITTINGS UNIVERSAL DORMA UNIVERSAL Universal as the name says With their broad range of options and configurations, DORMA Universal patch fittings are ideal for almost any design. Tempered glass assemblies are provided with fixed parts in a variety of arrangementswith corner fittings or fin fittings at different angles, and with double or singleacting doors in single-leaf or double-leaf designs. Easy glass preparation, secure mounting DORMA understands the special properties of glass as a building material, designing fittings that require only minimal glass prepara tiona quick and easy cut-out with additional holes. Careful consideration and positive measures have been taken to create the maximum clamping surface with optimum clamping efficiency. Suitable for common glass thicknesses DORMA Universal fittings are available for 3/8" (10) through 3/4" (19) for most fittings. Reliability built in Quality materials and thorough workmanship mean that DORMA Universal fittings have the features necessary to meet the most demanding specifications. The fittings are designed to withstand large and heavy doors up to a maximum weight of 275 lb (125 kg). Rails are available for heavier doors (330 lb [150 kg] maximum), wider doors (48" [1219] maximum), and high traffic doors. Matching range of locks The DORMA Universal range includes every type of accessory, and of course, a variety of locks and strike boxes in a matching design concept, giving the designer plenty of options to choose from. Contact Customer Service for more details. Short delivery times Most common patch fittings and finishes are available quickly. 6 DORMA

PATCH FITTINGS UNIVERSAL TYPE SELECTION Tempered glass assemblies with fittings 2-3/4" (70) pivot point. For all standard assembly types, see page 5. PT 21 PT 25 PT 24 RTS88 PT 20 PT 20 PT 20 PT 22 1/8 (3) 1/16 (2) 5/32 (4) 1/16 (2) 5/32 (4) PT 10 PT 10 PT 10 PT 10 BTS 01.107 BTS 901.106 9/32 (7) 1/8 (3) PT 30 PT62 PT40 PT40 PT 41 PT 20 PT 20 PT 20 PT 20 1/16 (2) 5/32 (4) 1/16 (2) 5/32 (4) PT 10 PT 10 PT 10 PT 10 BTS = Floor closer PT = Center hung door fittings RTS = Header/Transom closer (see Technical Information DORMA RTS Series for details) Maximum door weight & width for DORMA Universal fittings Max. door weight 275 lb (125 kg) Max. door width 48" (1219) For door weights up to 330 lb (150 kg) and widths up to 48" (1219), DRS door rails should be used. Torque for mounting screws Screws M 6 7.5 lb-ft / 10 Nm (4)* Screws M 6 11 lb-ft / 15 Nm (5)* Screws M 8 15 lb-ft / 20 Nm (5)* *Allan key size NOTE: If angle fittings or fin fittings are used "Left" or "Right" has to be determined by view from outside and above. inside left right outside DORMA 7

2 (51) 2 (51) 2 (51) PATCH FITTINGS UNIVERSAL PATCH FITTINGS 6-7/16 (164) 2-9/16 2-23/32 (65 69) PT 10 bottom patch with insert for DORMA floor closer, pivot, or round pivot Ø 9/16" (14) Ref. No. 833.300 Ref. No. 833.100 Ref. No. 833.301 Ref. No. 833.101 Pivot location 2-3/4" (70) Aluminum 1.241 (0.564) Brass 1.496 (0.680) Stainless steel 1.456 (0.662) 6-7/16 (164) 2-9/16 2-23/32 (65 69) PT 20 top patch with safety insert for top pivot Ø 19/32" used with PT21 Ref. No. 833.310 Ref. No. 833.110 Ref. No. 833.311 Ref. No. 833.111 Pivot location 2-3/4" (70) Aluminum 1.049 (0.477) Brass 1.305 (0.593) Stainless steel 1.265 (0.575) 6-7/16 (164) 2-5/8 (67) PT 22 top patch with insert for DORMA RTS concealed overhead closer Ref. No. 833.312 Ref. No. 833.112 Ref. No. 833.313 Ref. No. 833.113 Pivot location 2-3/4" (70) Aluminum 1.272 (0.578) Brass 1.529 (0.695) Stainless steel 1.489 (0.677) 2 (51) 6-7/16 (164) 2-3/32 + 1/16 (53 + 2) 1/4 (6) 1-9/16 (40) 2-3/8 (60) PT 29 top patch with pivot fixing plate, wall mount Ref. No. 833.314 Ref. No. 833.109 Ref. No. n/a Ref. No. n/a Pivot location 2-3/16" (55) Aluminum 1.197 (0.544) Brass 1.522 (0.692) Stainless steel 1.483 (0.674) Max. door width 39-3/8" (1000) Max. door weight 155 lb (70 kg) 8 DORMA

PATCH FITTINGS UNIVERSAL 2 (51) 6-7/16 (164) ø 19/32 2-9/16 2-23/32 (65 69) M8 3/8 (10) PT 30 transom patch with pivot Ø 19/32", with M8 tapped hole at side Ref. No. 833.330 Ref. No. 833.131 Ref. No. 833.321 Ref. No. 833.121 Pivot location 2-3/4" (70) Aluminum 1.162 (0.528) Brass 1.439 (0.654) Stainless steel 1.399 (0.636) 2 (51) 6-7/16 (164) M 8 3/8 (10) PT 30 transom patch with stop insert, with M8 tapped hole at side Ref. No. 833.332 Ref. No. 833.132 Ref. No. 833.333 Ref. No. 833.133 Pivot location 2-3/4" (70) Aluminum 1.162 (0.528) Brass 1.439 (0.654) Stainless steel 1.276 (0.580) 2 (51) 6-7/16 (164) M 8 3/8 (10) PT 30 transom patch with blank insert, with M8 tapped hole at side Ref. No. 833.334 Ref. No. 833.134 Ref. No. 833.335 Ref. No. 833.135 Aluminum 1.142 (0.519) Brass 1.419 (0.645) Stainless steel 1.256 (0.571) 1-3/4 (45) 3/8 (2) 2-3/8 (60) ø 3/8 (8.5) M 8 4-9/16 (116) M 8 2-15/16 (75) 1-1/8 (28) Fixing plate for transom patch PT 30 Ref. No. 903.128 Aluminum 0.035 (0.016) Brass 0.084 (0.038) Stainless Steel not available, Satin Chrome on Brass supplied. Wall anchor with thread M 8 for transom patch PT 30 Ref. No. 901.133 0.088 (0.040) Threaded rod M 8 with plug for transom patch PT 30 Ref. No. 901.134 0.070 (0.032) DORMA 9

PATCH FITTINGS UNIVERSAL CONNECTORS PT 40 transom sidelite patch with pivot Ø 19/32 Pivot location 2-3/4" (70) 8-19/32 (218) ø 19/32 4-3/16 (106) Ref. No. 833.343 Ref. No. 833.143 Ref. No. 833.344 Ref. No. 833.144 Aluminum 2.955 (0.755) Brass 2.108 (0.958) Stainless steel 2.061 (0.937) 2-11/16 2-13/16 (68 72) 8-19/32 (218) 4-3/16 (106) PT 40 transom sidelite patch with stop insert Ref. No. 833.336 Ref. No. 833.136 Ref. No. 833.337 Ref. No. 833.137 Aluminum 1.661 (0.755) Brass 2.108 (0.958) Stainless steel 2.061 (0.937) 8-19/32 (218) 4-3/16 (106) PT 40 transom sidelite patch with blank insert Ref. No. 833.338 Ref. No. 833.138 Ref. No. 833.339 Ref. No. 833.139 Aluminum 1.641 (0.746) Brass 2.088 (0.949) Stainless steel 2.042 (0.928) * Left hand fin (illustration shows left hand) / Right hand fin. Left or right hand is determined by view from outside. 10 DORMA

PATCH FITTINGS UNIVERSAL 2-11/16 2-13/16 (68 72) 8-19/32 (218) ø 19/32 4-3/8 (111) PT 41 transom sidelite patch with fin fitting inside with pivot Ø 19/32 (shown) (LH)/(RH) Ref. No. *833.355/833.354 Ref. No. *833.155/833.154 Ref. No. *833.356/833.357 Ref. No. *833.156/833.157 Pivot location 2-3/4" (70) Aluminum 2.094 (0.952) Brass 2.708 (1.231) Stainless steel 2.633 (1.197) PT 41 transom sidelite patch with fin fitting inside with stop insert (not shown) (LH)/(RH) Ref. No. *833.391/833.393 Ref. No. *833.191/833.193 Ref. No. *833.392/833.394 Ref. No. *833.192/833.194 PT 41 transom sidelite patch with fin fitting inside with blank insert (not shown) (LH)/(RH) Ref. No. *833.395/833.397 Ref. No. *833.195/833.197 Ref. No. *833.396/833.398 Ref. No. *833.196/833.198 19/32 1-5/32 (29) 1-3/16 15/16 (23) 1-5/32 (29) 4-3/16 (106) 4-3/16 (106) PT 60/61 transom sidelite connector for double or single acting doors, includes 1 stop and 2 blank inserts Ref. No. 803.150 Ref. No. 803.150 Ref. No. 803.452 Ref. No. 803.452 Specify glass thickness. Aluminum 0.755 (0.343) Brass 1.014 (0.461) Stainless steel 0.959 (0.436) DORMA 11

PATCH FITTINGS UNIVERSAL (52 ) 19/32 1-5/32 (29) 1-3/16 29/32 (23) 4-3/8 (111) 1-5/32 (29) 4-3/16 (106) 1-3/16 PT 60/61 transom sidelite connector with fin fitting inside for double or single acting doors, includes 1 stop and 2 blank inserts (LH)/(RH) Ref. No. 803.158/803.157 Ref. No. 803.158/803.157 Ref. No. n/a Ref. No. n/a Aluminum 0.986 (0.448) Brass 1.415 (0.643) Stainless steel 1.320 (0.600) Left hand fin (illustration shows left hand) / Right hand fin. Left or right hand is determined by view from outside. 4-3/16 (106) 4-3/16 (106) PT 62 transom sidelite connector with fixed stop Ref. No. 803.173 Ref. No. 803.173 Ref. No. n/a Ref. No. n/a Aluminum 1.045 (0.475) Brass 1.507 (0.685) Stainless steel 1.474 (0.670) 1 (26) 1-3/16 29/32 (23) 4-9/16 (116) 1-5/32 (29) 1-5/32 (29) 19/32 PT 70 transom connector includes 2 stop and 2 blank inserts Ref. No. 801.150 Ref. No. 801.150 Ref. No. 801.158 Ref. No. 803.158 Specify glass thickness. Aluminum 0.598 (0.272) Brass 0.766 (0.348) Stainless steel 0.737 (0.335) 12 DORMA

1 (26) 2-1/16 PATCH FITTINGS UNIVERSAL 4-9/16 (116) PT 71 transom connector with fin fitting Ref. No. 801.161 Ref. No. 801.161 Aluminum 1.008 (0.458) Brass 1.375 (0.625) Stainless steel 1.338 (0.608) 4-9/16 (116) 4-3/16 (106) 4-3/16 (106) PT 80 connector Ref. No. 803.170 Ref. No. 803.170 Ref. No. 803.472 Ref. No. 803.472 Aluminum 1.221 (0.555) Brass 1.760 (0.800) Stainless steel 1.716 (0.780) Specify glass thickness 4-3/8 (111) 1-3/16 PT 81 connector with fin fitting Ref. No. 803.175 Ref. No. 803.175 Aluminum 1.725 (0.784) Brass 2.372 (1.078) Stainless steel 2.343 (1.065) 4-3/16 (106) 4-3/16 (106) 2-7/8 (73) 2-7/8 (73) 4-3/16 (106) PT 80-90 connector angled 90 Ref. No. 803.171 Ref. No. 803.171 Aluminum 1.027 (0.467) Brass 1.232 (0.560) Stainless steel 1.188 (0.540) DORMA 13

PATCH FITTINGS UNIVERSAL 2-7/8 (73) 2-7/8 (73) PT 80-90 short connector shortened, angle 90 Ref. No. 803.470 Ref. No. 803.470 Aluminum 0.519 (0.236) Brass 0.616 (0.280) Stainless steel 0.594 (0.270) 1-1/8 (28) 2-3/32 (53) PT 90 screw on fitting Ref. No. 807.021 Ref. No. 807.021 Ref. No. 807.210 Ref. No. 807.210 Aluminum 0.264 (0.120) Brass 0.352 (0.160) Stainless steel 0.341 (0.155) Specify glass thickness. 1-1/8 (28) 2-3/32 (53) PT 91 corner fitting Ref. No. 807.023 Ref. No. 807.023 Ref. No. 807.211 Ref. No. 807.211 Aluminum 0.264 (0.120) Brass 0.352 (0.160) Stainless steel 0.341 (0.155) Specify glass thickness. 1 (26) 4-9/16 (116) 1/8 (3) 3-11/32 2-3/8 (85 60) Side connector with wall mounting plate Ref. No. 801.153 Ref. No. 801.153 Aluminum 0.689 (0.313) Brass 0.856 (0.389) Stainless steel 0.827 (0.376) 14 DORMA

PATCH FITTINGS UNIVERSAL GLASS PREPARATION DETAILS PT 10, PT 20, PT 22, PT 29, PT 30 Top and bottom patches, transom patch 6-11/32 (161) 5-27/32 (148) 2-11/16 (68) 1-13/32 (36) R 2-5/32 (55) R 3-5/32 (80) 1-15/32 (37) Ref. No. 833.300 833.310 833.312 803.114 833.330 833.332 833.334 833.100 833.110 833.112 833.109 833.131 833.132 833.134 833.301 833.311 833.313 833.321 833.333 833.335 833.101 833.111 833.113 833.121 833.133 833.135 PT 40 Patch for transom and sidelite 6-11/32 (161) 5-27/32 (148) 1/32 (1) 1-31/32 (36) 2-11/16 (68) 1-31/32 (36) R 2-5/32 (55) R 3-5/32 (80) 1-15/32 (37) 1-31/32 (36) 2-7/8 (73) Ref. No. 833.343 833.333 833.335 833.143 833.133 833.135 833.344 833.334 833.336 833.144 833.134 833.136 DORMA 15

PATCH FITTINGS UNIVERSAL R 3/8 (10) 1/32 (1) PT 41 Patch for transom and sidelite with fin fitting inside Ref. No. see below. A-B 1-13/32 (36) 1-3/16 R 2-5/32 (55) R 3-5/32 (80) 1-3/4 (45) 6-11/32 (161) 5-27/32 (148) 2-3/8 (60) 1-13/16 2-11/16 (68) 1/32 (1) A B 3/8 (10) 1-13/32 (36) 1-15/32 (37) 1-13/32 (36) 2-7/8 (73) Ref. No. 833.355/833.354 833.155/833.154 833.356/833.357 833.156/833.157 833.391/833.393 833.191/833.193 833.392/833.394 833.192/833.194 833.395/833.397 833.195/833.197 833.396/833.398 833.196/833.198 PT 51 Transom fin fitting for back to back doors.5 Ref. No. 833.369/833.169 A B R 3/8 (10) 1/32 (1) Special Order for 833.368/833.168 1-3/16 2-3/8 (60) 1-3/4 (45) 1-13/16 3/8 (10) 6-11/32 (161) 1/32 (1) 6-11/32 (161) 5-27/32 (148) 5-27/32 (148) 2-11/16 (68) 2-11/16 (68) 1-13/32 (36) R 2-5/32 (55) 1-15/32 (37) 1-15/32 (37) R 3-5/32 (80) R 3-5/32 (80) A B R 2-5/32 (55) 1-13/32 (36) 16 DORMA

PATCH FITTINGS UNIVERSAL 1-13/32 (36) 1/32 (1) 2-1/8 (73) 1-13/32 (36) 2-1/8 (73) 1/32 (1) 1-13/16 PT 60/61, PT 62 Connectors for transoms and sidelites Ref. No. 803.150/803.452 and connector with stop Ref. No. 803.173 Ref. No. 803.157/803.158 Glass preparation for fin fitting see PT 81 (page 18) PT 70 Transom connector Ref. No. 801.150/801.158 2-1/8 (73) A PT 71 Transom connector with fin fitting Ref. No. 801.161 B 1-13/16 1/32 (1) 1-13/32 (36) 1-13/32 (36) A-B 1-13/32 (36) 1/32 (1) 1-13/32 (36) 1-13/16 A 1/32 (1) 1-17/32 (39) 1-3/4 (45) PT 80 Connector Ref. No. 803.170/803.472 DORMA 17

PATCH FITTINGS UNIVERSAL PT 81 Connector with fin fitting Ref. No. 803.175 PT 80-135 Angled connector, 135 Ref. No. 803.172 (Special order only) Glass preparation examples for angles between 91 134 /136 179 (Check for availabilty) 1/32 (1) 3/8 (10) R 3/8 (10) A 1/32 (1) 1-13/32 (36) 1-13/32 (36) 2-3/8 (60) 1-13/16 1-3/4 (45) 1-13/16 2-7/8 (73) 1-13/32 (36) 1-13/32 (36) ø 2-7/8 (73) 1-13/32 (36) 1-13/32 (36) 1/32 (1) 1-3/16 1/32 (1) 1-3/16 1-13/32 (36) ø ø 1-1/8 (29) 1-9/16 (40) 1-1/8 (29) 1-9/16 (40) PT 80 Angled connector, 90 Ref. No. 803.171 Glass preparation examples for angles between 91 134 /136 179 (Check for availability) PT 80 shortened Angled connector, 90 shortened Ref. No. 803.470 Glass preparation examples for angles between 91 134 /136 179 (Check for availability) 18 DORMA

1-3/16 PATCH FITTINGS UNIVERSAL PT 90 Screw on fitting Ref. No. 807.021/807.210 PT 91 Corner fitting Ref. No. 807.023/807.211 15/16 (24) 1/4 (6) R 3/8 (10) 1-3/16 R 1/8 (3) ø 1/4 (6.5) R 1/8 (3) ø 1/4 (6.5) R 3/8 (10) 1-3/8 (35) 9/16 (14) 1-9/16 (40) Side connector with fixing plate Ref. No. 801.153 1-3/16 3-21/32 (93) 1/32 (1) ø 1/4 (6.5) R 3/8 (10) DORMA 19

ø 1/8 (3) PATCH FITTINGS UNIVERSAL CONSTRUCTION ø 1/4 (6) Mounting of pivots and top pivot pins ø 19/32 PT 24 ø 19/32 PT 24 PT 25 PT 25 Mounting of top pivots and top pivot pins for PT 20 Mounting of floor closers or pivot bearings for PT 10 PT 21 PT 20 2-11/16 2-13/16 (68 72) PT 10 BTS 901.106 901.107 20 DORMA

PATCH FITTINGS ARCOS UNIVERSAL ARCOS UNIVERSAL Unique design with in-built system versatility The ARCOS Universal range offers patch fittings and connector hardware for transoms and side panels, and fin fittings for particularly large systems with the curved arc motif of the ARCOS design incorporated into each component. Gentle reflections that change with the planes give the glass and its fittings a uniform appearance. Easy glass preparation, secure fixing DORMA understands the special properties of glass as a building material, designing fittings that require only minimal glass prepara tiona quick and easy cut-out with additional holes. Careful consideration and positive measures have been taken to create the maximum clamping surface with optimum clamping efficiency. Suitable for common glass thicknesses ARCOS Universal fittings are available for 3/8" (10) and 1/2" (12) glass thicknesses. Reliability built in Quality materials and thorough workmanship mean that ARCOS Universal fittings have the features necessary to meet the most demanding of specifications. The fittings are designed to withstand large and heavy doors up to a maximum weight of 220 lb (100 kg). Rails are available for heavier doors330 lb (150 kg) maximum, for wider doors 48" (1219) maximum, and for high traffic doors. Clip-on technique The innovative clip-on technique incorporated into the hardware ensures that the cover caps are secured to the basic components, so that the fixing pin is virtually invisible. Matching range of locks The ARCOS Universal range includes every type of accessory, and of course, a variety of locks and strike boxes in a matching design concept, giving the designer plenty of options to choose from. Contact Customer Service for more details. DORMA 21

PATCH FITTINGS ARCOS UNIVERSAL TYPE SELECTION Tempered glass assemblies with fittings 2-3/4" (70) pivot point. For all standard assembly types, see page 5. PT 21 PT 25 PT 24 RTS 88 PT 20 PT 20 PT 20 PT 22 1/8 (3) 1/16 (2) 1/16 (2) 1/16 (2) 5/32 (4) PT 10 PT 10 PT 10 PT 10 BTS 01.107 BTS 901.106 9/32 (7) 1/8 (3) PT PT30 PT PT 40 40 3 PT PT 41 41 PT 40 PT20 PT 20 PT 20 PT 20 1/16 (2) 1/16 (2) 1/16 (2) 5/32 (4) PT 10 PT 10 PT 10 PT 10 9/32 (7) BTS = Floor closer PT = Center hung door fittings RTS = Header/Transom closer (see Technical Information DORMA RTS Series for details) Maximum door weight & width for DORMA Universal fittings Max. door weight 220 lb (80 kg) Max. door width 43" (1100) For door weights up to 330 lb (150 kg) and widths up to 48" (1219), DRS door rails should be used. Torque for mounting screws Screws M 6 7.5 lb-ft / 10 Nm (4)* Screws M 6 11 lb-ft / 15 Nm (5)* Screws M 8 15 lb-ft / 20 Nm (5)* *Allan key size NOTE: If angle fittings or fin fittings are used "Left" or "Right" has to be determined by view from outside and above. left inside outside right ARCOS Universal is available in the following surface finishes Aluminum, EV1 (114) Satin stainless steel (700) Polished stainless steel (701.. Aluminum, dark bronze anodized (108).. Black Anodized (109) Special finishes may be available upon request. 1. Available upon request 22 DORMA

3/8 (10) PATCH FITTINGS ARCOS UNIVERSAL PATCH FITTINGS Shown with 3/8" (10) and 1/2" (12) glass. For accessories, see page 34. 7-1/32 (179.5) 2-15/32 (53 63) ARCOS PT 20 top patch with plastic socket for top pivot Ø 19/32, used with PT21 Ref. No. 826.110 Ref. No. 833.210 Pivot location 2-5/8" (67) Aluminum 1.049 (0.477) Stainless steel 1.265 (0.575) 7-1/32 (179.5) 2-15/32 (53 63) ARCOS PT 22 top patch with insert for DORMA RTS overhead concealed closer (see also Technical Information DORMA RTS Series) Pivot location 2-5/8" (67) Aluminum 1.272 (0.578) Stainless steel 1.489 (0.677) Ref. No. 826.112 Ref. No. 833.208 7-1/32 (179.5) 2-15/32 (53 63) ARCOS PT 10 bottom patch with insert for DORMA floor closer spindle, or round pivot Ø 9/16" (14) Ref. No. 826.100 Ref. No. 833.200 Pivot location 2-5/8" (67) Aluminum 1.241 (0.564) Stainless steel 1.456 (0.662) 7-1/32 (179.5) M 8 ARCOS PT 30 transom patch with pivot Ø 19/32, with M 8 tapped hole at side Ref. No. 826.120 Ref. No. 833.220 Pivot location 2-5/8" (67) Aluminum 1.161 (0.528) Stainless steel 1.399 (0.636) Ø 19/32 2-31/32 (53 63) DORMA 23

3/8 (10) 3/8 (10) PATCH FITTINGS ARCOS UNIVERSAL 7-1/32 (179.5) ARCOS PT 30 transom patch with stop insert M 8 Ref. No. 826.420 Ref. No. 833.222 Aluminum 1.161 (0.528) Stainless steel 1.276 (0.580) 1-1/32 (27) 1-1/32 (27) 7-1/32 (179.5) ARCOS PT 30 transom patch with blanking insert M 8 Ref. No. 826.421 Ref. No. 833.223 Aluminum 1.141 (0.519) Stainless steel 1.256 (0.571) 1/16 (2) 1-3/4 (45) 2-3/8 (60) 1-13/32 (36) ø 11/32 (8.5) M 8 4-9/16 (116) Fixing plate for transom patch PT 30 Ref. No. 903.128 Aluminum 0.035 (0.016) Brass 0.083 (0.038) Wall anchor with thread M 8 for transom patch PT 30 Ref. No. 901.133 0.088 (0.040) Stainless steel not available, satin chrome on brass supplied. M 8 2-15/16 (75) 1-1/8 (28) Threaded rod M 8 with plug for transom patch PT 30 Ref. No. 901.134 0.070 (0.032) 24 DORMA

1-1/32 (27) PATCH FITTINGS ARCOS UNIVERSAL CONNECTORS 9-13/16 (249) Ø19/32 4-7/32 (107) ARCOS PT 40 patch for transom and sidelite with pivot Ø 19/32 Ref. No. 826.140 Ref. No. 833.240 Pivot location 2-5/8" (67) Aluminum 1.661 (0.755) Stainless steel 2.061 (0.937) 2-3/16 2-9/16 (55 65) 1-1/32 (27) 9-13/16 (249) 4-7/32 (107) ARCOS PT 40 patch for transom and sidelite with stop insert Ref. No. 826.440 Ref. No. 833.241 Aluminum 1.661 (0.755) Stainless steel 2.061 (0.937) 2-1/32 9-13/16 (249) 4-7/32 (107) ARCOS PT 40 patch for transom and sidelite with blanking insert Ref. No. 826.441 Ref. No. 833.242 Aluminum 1.641 (0.746) Stainless steel 2.041 (0.928) 2-3/16 2-9/16 (55 65) Ø19/32 9-13/16 (249) 4-11/32 (110) 4-7/32 (107) ARCOS PT 41 patch for transoms and sidelite with fin fitting inside with pivot Ø 19/32" Ref. No. *826.162/826.163 Ref. No. *833.245/833.246 With stop insert (not illustrated) Ref. No. *826.262/826.263 Ref. No. *833.248/833.249 With blanking insert (not illustrated) Ref. No. *826.264/826.265 Ref. No. *833.250/833.251 Pivot location 2-5/8" (67) Aluminum 2.094 (0.952) Stainless steel 2.633 (1.197) * Left hand fin (illustration shows left hand) / Right hand fin. Left or right hand is determined by view from outside. DORMA 25

2-3/8 (60) 1-13/32 (36) 1-15/32 (37) PATCH FITTINGS ARCOS UNIVERSAL GLASS PREPARATION DETAILS ARCOS PT 10, PT 20, PT 22, PT 30 R 2-5/32 (55) 6-11/32 (161) 5-27/32 (148) R 3-5/32 (80) 2-11/16 (68) 1-15/32 (37) Top and bottom patches, transom patch Ref. No. 826.100 826.120 833.200 833.220 826.110 826.420 833.210 833.222 826.112 826.421 833.208 833.223 ARCOS PT 40 6-11/32 (161) 1/32 (1) 1-13/32 (36) 5-27/32 (148) 2-11/16 (68) 1-13/32 (36) Patch for transom and sidelite R 2-5/32 (55) Ref. No. R 3-5/32 (80) 1-13/32 (36) 2-7/8 (73) 826.140 833.240 826.440 833.241 826.441 833.242 ARCOS PT 41 R 3/8 (10) 1/32 (1) A-B 1-3/16 6-11/32 (161) 5-27/32 (148) 1-3/4 (45) 1-3/16 1/32 (1) 3/8 (10) 1-13/32 (36) 2-11/16 (68) Patch for transom and sidelite with fin fitting inside 1-13/32 (36) R 2-5/32 (55) R 3-5/32 (80) Ref. No. 826.162 826.263 833.245 833.249 826.163 826.264 833.246 833.250 826.262 826.265 833.248 833.251 A B 1-15/32 (37) 1-13/32 (36) 2-7/8 (73) 26 DORMA

1/4 (6) PATCH FITTINGS ARCOS UNIVERSAL CONSTRUCTION Mounting of pivots and top pivot pins 1/8 (3) Mounting of top pivots and top pivot pins for ARCOS 20 ø 19/32 PT 24 ø 19/32 PT 24 PT 25 PT 25 Mounting of floor closers, floor bearings for ARCOS 10 PT 21 ARCOS PT 20 2-3/16 2-9/16 (55 65) ARCOS PT 10 BTS 901.106 901.107 DORMA 27

PATCH FITTINGS DORMA EA DORMA EA The expansive range with slimline bodies for offset hung doors DORMA EA patch fittings are characterized by their slim, neat shape and skillful European hinge design. This com prehensive range of fittings allows the transparent elegance of single-action doors to reach their full potential whether hung in frames or integrated into tempered glass openings. Easy glass preparation, secure mounting DORMA understands the special properties of glass as a building material, designing fittings that require only minimal glass prepara tiona quick and easy cut-out with additional holes. Careful consideration and positive measures have been taken to create the maximum clamping surface with optimum clamping efficiency. Suitable for common glass thicknesses DORMA EA patch fittings are available for 3/8" (10) and 1/2" (12) glass thicknesses. Reliability built in Quality materials and thorough workmanship mean that DORMA EA patch fittings have the features necessary to meet the most demanding of specifications. Matching range of locks The DORMA EA range includes every type of accessory, and of course, a variety of locks and strike boxes in a matching design concept, giving the designer plenty of options to choose from. Contact Customer Service for more details. DORMA EA corner patches are available in the following finishes.. Aluminum, silver anodized EV1, (101).. Similar to satin stainless steel (107).. Aluminum, dark bronze anodized DB (108) Black anodized (109) Polished chrome plated (501) Brass, polished (503).. Brass, satin chrome plated (500) 28 DORMA

PATCH FITTINGS DORMA EA Offset hung doors in tempered glass assemblies 902.140 902.110 901.150 1/8 (3) 902.121 902.111 Max. door weight 220 lb (100 kg) Max. door width 43" (1100) For door weights up to 220 lb (100 kg) and widths up to 47" (1200), DRS door rails should be used. 1-13/32 (36) 1/16 (2) 1/16 (2) 1-13/32 (35.5) 902.100 X 1-3/4 (45) 9/32 (7) 1/16 (2) 902.101 1-13/32 (36) 1-11/16 (43) DORMA EA patch fittings for offset hung doors in tempered glass assemblies have a 1-13/32" (36) offset = 1-11/16" (43) from pivot point to glass surface. Torque for fixing screws Scre ws M 8 15 lb-ft / 20 Nm 3/16 (5) DORMA 29

4-7/32 (107) PATCH FITTINGS DORMA EA PATCH FITTINGS 1-13/32" (36) offset = 1-11/16" (43) from pivot point to glass surface, complete, for 3/8" (10) and 1/2" (12) glass thickness. 1 (26) Bottom patch to suit DORMA floor closer spindle, or round pivot Ø 9/16" (14) Ref. No. *902.100/902.101 (LHR)(RHR) 4-9/16 (116) Aluminum 1.606 (0.730) Stainless steel 2.807 (1.276) 1 (26) 4-9/16 (116) Top patch Ref. No. *902.110/902.111 (LHR)(RHR) Aluminum 1.452 (0.660) Stainless steel 2.734 (1.243) 4-9/16 (116) M 8 Transom patch bushing outside Ø ", pivot Ø 19/32" Ref. No. *902.120/902.121 (LHR)(RHR) Aluminum 1.401 (0.637) Stainless steel 2.624 (1.193) 5/8 (16) 1 (26) See page xx for wall connector plate Ref. No. 801.127 6-11/16 (170) Patch for transom and sidelite bushing outside Ø ", pivot Ø 19/32" Ref. No. *902.140/902.141 (LHR)(RHR) Aluminum 1.830 (0.832) Stainless steel 3.099 (1.409) 1 (26) 30 DORMA

2-11/16 (68) 2-11/16 (68) 7/8 (22) FT = 3/8 (10) PATCH FITTINGS DORMA EA 7/8 (22) 1-13/32 (35.5) 1-3/4 (45) 1-7/8 (47.5) 1-3/4 (45) 1-3/16 Top patch complete with pivot for sidelite Ref. No. *902.200/902.201 (LHR)(RHR) Aluminum 3.113 (1.415) Stainless steel 5.678 (2.581) 1-11/16 (43) 1-13/32 (36) 1/16 (2) 3/16 (5) 1-11/16 (43) 1-13/32 (36) 1/16 (2) 3/16 (5) 1-11/16 (43) 4-9/16 (116) Top patch complete with pivot for wall mounting Ref. No. *902.202/902.203 (LHR)(RHR) Aluminum 2.809 (1.277) Stainless steel 5.561 (2.528) 1-3/16 1-11/16 (43) 1-13/32 (36) 1-3/4 (45) 3/8 (10) 11/16 (17) 1-13/32 (35.5) 1/16 (2) 1-3/8 (35) 1-13/16 (46) 3/8 (9) 1-13/32 (36) 3/16 (5) 7/16 (11) 1-3/8 (35) 1-13/16 (46) 7/16 (11) Top patch complete with pivot for frame mounting Ref. No. *902.204/902.205 (LHR)(RHR) Aluminum 1.969 (0.895) Stainless steel 3.850 (1.750) (LHR) (RHR) * Left/right hand reverse is determined by view from hanging pull side. DORMA 31

19/32 7/8 (22.5) 19/32 23/32 (18) 7/8 (22.5) 19/32 PATCH FITTINGS DORMA EA TOP CENTERS FOR WOOD & STEEL FRAMES 1-1/32 (27) 1-1/32 (27) 1-1/32 (27) 1-1/32 (27) 7/8 (22.5) 3-1/2 (89) 11/16 (17.5) 1-3/16 5/32 (4) 3-1/2 (89) 9/32 (7) 2-11/16 (68) 7/16 (11) 1-3/16 1-13/32 (36) FT 15/16 (24) max. 1-9/16 (40) 1-13/32 (36) 1 (25) FT 15/16 (24) max. 1-9/16 (40) 5/32 (4) 1-21/32 (42) max. 2-9/32 (58) 1-21/32 (42) max. 2-9/32 (58) Frame top center with fixing block Ref. No. 902.150 Aluminum 1.036 (0.471) Stainless steel 2.149 (0.977) (If corner fittings/door rails are combined with frame top centers described below, please indicate rebate depth with order.) Frame top center with angle bracket Ref. No. 902.151 Aluminum 0.996 (0.453) Brass 2.109 (0.959) 1-13/32 (36) FT 15/16 (24) max. 1-9/16 (40) M8 3/8 (9) Frame top center only for steel frames, with special wedge screw mounting Ref. No. *902.152/902.153 (LHR)(RHR) Aluminum 0.858 (0.390) Brass 4.171 (1.896) 1-21/32 (42) max. 2-9/32 (58) * Left/right hand (illustration below shows right hand reverse) are 7/8 (22.5) determined by view from hanging pull side. 3-1/2 (89) 1-3/16 32 DORMA

1-13/32 (36) 1-13/32 (36) 1-9/16 (40) PATCH FITTINGS DORMA EA GLASS PREPARATION DETAILS 1-3/16 1- (45) 1-13/32 (35.5) Bottom patches Ref. No: left hand 902.100 right hand 902.101 1-3/16 Top patches Ref. No: left hand 902.110 right hand 902.111 1- (45) 1-13/32 (35.5) Overhead patches R 3/8 (10) Ref. No: left hand 902.120 right hand 902.121 4-1/32 (103) 1-9/16 (40) 4-1/32 (103) 1/32 (1) 1-13/32 (36) Patches for transom and sidelite Ref. No: left hand 902.140 R 3/8 (10) 1/32 (1) right hand 902.141 DORMA 33

3/16 (5) PATCH FITTINGS ACCESSORIES ACCESSORIES Accessories for patch fittings perfection in detail DORMA offers a wide range of original patch fitting accessories to optimize the technical excellence and cost effectiveness of tempered glass systems of all types. As well as functional components, such as special floor pivots, DORMA offers security-relevant options that enhance the exceptional functional efficiency, reliability, and long service life expected of DORMA glass systems and solutions. Floor bearings & floor socket 3-5/8 (92) Ø 9/16 (14) 15/16 (24) 19/32 Floor pivot bearing (355.6) with round pivot Ø 9/16" (14), and cover plate; height adjustable by 3/16" (5) max. door weight 220 lb (100 kg) Ref. No. 901.106 Aluminum 0.341 (0.155) Brass 0.374 (0.170) Stainless steel 0.372 (0.169) 1-3/4 (45) 3-31/32 (101) F.F.S. 5/32 (4) Floor bearing (355.5) with DORMA profile spindle (longer spindle on request) max. door weight 440 lb (200 kg) Ref. No. 904.602 0.559 (0.254) Stainless Steel max. door weight 440 lb (200 kg) Ref. No. 904.603 0.563 (0.256) F.F.S.= Finished Floor Surface Ø 5/8 (15.5) Ø 1-9/16 (40) (31) Floor socket eccentric, zinc coated brass, with adjustable plastic socket insert Ref. No. 805.194 0.044 (0.020) Ø 1 (25) 34 DORMA

PATCH FITTINGS ACCESSORIES Pivots 1 (25) 6-1/2 (165) Ø 19/32 1-11/32 (34) 1-11/16 (42.5) 3/16 (5) PT 21 frame hung portion top center hung with removable pin Ø 19/32" Ref. No. 901.117 0.737 (0.335) 1 (25) 1/32 (1) PT 21 cover plate Ø 19/32 Ref. No. 227.004 6-1/2 (165) Ø 19/32 3-15/16 (100) 1-3/4 (45) 1/4 (6) 1 (25) PT 24 pivot (325. 6-6) Ø 19/32 with mounting plate, material thickness 6 mm countersink base plate in ceiling Ref. No. 901.116 Aluminum 0.128 (0.058) Ø 19/32 3-15/16 (100) 1-3/4 (45) 1/8 (3) 1 (25) PT 24 pivot (325.6-3) Ø 19/32, with mounting plate, material thickness 3 mm, to screw on the ceiling Ref. No. 901.923 Aluminum 0.092 (0.042) Brass 0.171 (0.078) Stainless steel 0.163 (0.074) Ø 3/8 (10) M8 1-1/8 (28) PT 25 pivot (325.3) Ø 19/32, with plug Ref. No. 901.115 0.097 (0.044) Ø 19/32 1-21/32 (42) 5/8 (16) Ø 1/16 (2) DORMA 35

M 8 PATCH FITTINGS ACCESSORIES Fixing Plate, Threaded Rod & Cylinder 1/16 (2) 1-3/4 (45) 2-3/8 (60) Ø 11/32 (8.5) Mounting plate for transom patch PT 30 Ref. No.903.128 Aluminum 0.035 (0.016) Brass 0.083 (0.038) Stainless steel not available, satin chrome on brass supplied. 2-15/16 (75) 1-1/8 (28) Threaded rod M 8 with plug for transom patch Ref. No. 901.134 0.070 (0.032) 2-5/8 (67) 6-5/32 (156) Patch Lock AR20 Ref. No. 801.124 Ref. No. 801.122 Ref. No. 801.126 Ref. No. 801.125 3- (96) Thumbturn with blocking ring Ref. No. 225.996 Key Cylinder with blocking ring Ref. No. 225.997 36 DORMA

8-5/8 (219) 2 (51) PATCH FITTINGS ACCESSORIES Glass PreparationPatch Lock Ø C L 2 (51) C L 5-1/2 (140) 5-5/8 (143) Ref. No. 801.124 Ref. No. 801.122 R 3/4 (19) C L C L 5-1/8 (130) 5-9/16 (141) Ref. No. 801.126 Ref. No. 801.125 DORMA 37

168 (4267) MAX. PATCH FITTINGS ACCESSORIES Fin Usage & Assembly Stabilizer fins C 3-31/32 (101) MIN. A B 6 (152) MIN. Note: Tapered fins are not a requirement typically only aesthetic Entrance structurally supported at the head and sill Risk of excessive deflection increases as the distance from the door s upper pivot to struc ture increases. To reduce deflection, glass fins mounted perpendicular to the glass wall should be employed. Refer to the graph below for fin usage recommendations. NOTE: When fins are used, they must be mechanically fastened to adequate support. If transom weight exceeds 100 lbs (45 kg), it should also be mechanically fastened to structure above to provide additional support. This graph constitutes general recommendations only. Individual situations and site conditions may require additional support to adequately reduce deflection. Exterior applications up to 13' (4 m) should have jobspecific calculations processed. Exterior applications over 13' (4 m) require a set of full engineering specifications. To use the graph, determine the height of the transom (dimension A) as well as the width of the sidelite (dimension B as shown in the elevationor a total width to nearest support point in the Interior stabilizer Fin Size Chart A TRANSOM HEIGHT (in) 60" 50" 40" 30" 20" 10" case of multiple sidelites). Locate the intersecting point of these two grids on the graph. If this intersecting point falls within the shaded area of the graph, fins are required. Next, determine fin top width (dimension C) on the fin width scale by matching transom height (dimension A). B SIDELITE WIDTH (mm) 508 mm 1016 mm 1524 mm 2032 mm 254 mm 762 mm 1270 mm 1778 mm 1524 mm FINS REQUIRED 1270 mm 1016 mm 762 mm 506 mm 254 mm A TRANSOM HEIGHT (mm) C FIN WIDTH (mm) 254 mm 508 mm 127 mm 381 mm 0" 0" 10" 20" 30" 40" 50" 60" 70" 80" B SIDELITE WIDTH (in) Example: If A=44" (1118 mm) and B=36" (914 mm), then C=17" (432 mm) 0" 5" 10" 15" 20" C FIN WIDTH (in) 38 DORMA

PATCH FITTINGS ACCESSORIES Mechanical channel Consists of base section with bore holes every 11-13/16" (300), including clamping parts with screws and gasket strips. Application All around frame system for tempered glass assemblies, with fittings on sides and ceiling. The safety type prevents free hanging glass panels from falling down by mounting the clamping fitting through glass holes. 33 lb (15 kg) load for each clamping part, torque for fixing screws 7.5 lb-ft / 10 Nm (M 6 = hex key size 4). Standard type Base profile standard type 157" (4000) stock length Weight in lb/ft (kg/m) Aluminum 0.037 (0.055) Base profile Clamping part 807.045 See right for price numbers Weight in lb/ft (kg/m) Aluminum.805 (1.200) for 3/8" (10) through 3/4" (19) glass thickness Ref. No. 807.045 Clamping part standard type 2-3/8" (60) long with screw and gasket Ref. No. 807.004 Ref. No. 807.085 Ref. No. 807.087 Ref. No. 807.089 1-9/16 (40) 23/32 (18) Tempered monolithic 3/8" (10) glass only Glass preparation for safety type mechanical channel Non-stock Base profile as safety type 807.061 3/4 (19) Ø 1/2 (12) Clamping part for safety type 807.064 5-29/32 ± 1/32 (150 ± 0.5) 11-13/16 ± 1/32 (300 ± 0.5) 1/16 (2) 11-13/16 ± 1/32 (300 ± 0.5) 1-5/32 (29) 1-9/16 (40) Clip on cover, end caps & filler block 1-9/16 (39.5) 1-9/16 (40) 1-9/16 (40) 1-5/8 (41) Clip on cover profile 157" (4000) stock length, brass, stainless steel, satin and stainless steel polished available Ref. No. 807.003 Weight in lb/ft (kg/m) Aluminum 0.137 (0.203) Brass 0.252 (0.373) Stainless Steel 0.252 (0.373) End cap for 3/8" (10) and 1/2" (12) glass thickness Ref. No. 807.007 Aluminum 0.484 (0.220) Brass 1.383 (0.629) Stainless Steel 1.348 (0.613) End cap for 5/8" and 3/4" (19) glass thickness Ref. No. 807.065 DORMA 39

07000361 2.15 USA EO www.dorma.com DORMA USA, Inc. Dorma Drive, Drawer AC Reamstown, PA 17567 Tel: 800 523 8483 Fax: 800 274 9724 archdw@dorma-usa.com DORMA Canada 1680 Courtney Park Drive, Unit 13 Mississauga, Ontario L5T 1R4 Tel: 800 387 4938 Fax: 905 670 5850 www.dormacanada.com DORMA Mexico Calle Sur 110 no. 63, Col. Tolteca 01150 México, D.F. Tel: 5255 5272 6937 Fax: 5255 5272 6948 operacion@dorma.com.mx