Product Catalogue. Well Servicing Products. Special Machines

Product Catalogue Well Servicing Products Wireline Units & Accessories Fluid Pump Units & Accessories Coiled Tubing Units & Accesorries Workover & Drilling Equipment Special Machines Test Equipment Hydraulic Power Units Workshop Equipment Special Equipment Rev. 12 July 2017

Content Wireline Units & Accessories Truck-mounted Wireline Units Wireline Unit PTO Swap Body 24ft Wireline Unit PP Swap Body 24 ft Wireline Unit Fixed Body 15ft Logging Unit Fixed Body 24ft Wireline Skid Units Offshore Wireline Unit 3-Split Offshore Wireline Unit Lightweight Wireline Unit 2-Split Offshore Wireline Unit Slickline Alu Unit Containerized Wireline Units Wireline Container Unit 20ft Wireline Crane Units Wireline Crane Unit Wireline Accessories Grease Injection Pump Crane Support Truck Wireline Spooling Unit Wireline Spooling Stand Wireline Mast Well Servicing Products

Truck-mounted Wireline Units Wireline Units & Accessories Wireline Unit PTO Swap Body 24ft Profile The KOLLER Wireline Truck has been developed for carrying out measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. Flexibility, high speed and high pull force at any depth characterize our Wireline Winches. Our designs are developed by close association with our customers. The unit can be placed on trucks from various manufacturers. The layout of the workshop and operator area is free configurable by the customer. stepless hydraulic drive by truck power take off (PTO) high pull force in combination with high operation speed high performance along the whole depth KOLLER quick drum change system parallel-working independent electrical and hydraulic backup tension system on measuring head air or manual driven hydraulic pump with backup function ergonomically designed operator area mounting possible on different truck chassis sliding roof above winch area provide an unrestricted view on operations racks for tools with pneumatic locking system for secure transportation CE conform design Options integrated pressure and grease control panel workshop area individually equipped according to customer requirements constant speed Well Servicing Products A1-001

Wireline Unit PTO Swap Body 24ft Specifications Speed m/min / ft/min (SL Drum Size 1) Max. pullforce kg / lbs (SL Drum Size 1) Speed m/min / ft/min (SL Drum Size 2) Max. pullforce kg / lbs (SL Drum Size 2) Speed m/min / ft/min (EL Drum Size 1) Max. pullforce kg / lbs (EL Drum Size 1) Winch driven by Range of ambient C OD 660 / 2,165 ID 385 / 1,263 OD 2,518 / 5,551 ID 4,317 / 9,517 OD 768 / 2,520 ID 527 / 1,728 OD 2,159 / 4,759 ID 3,148 / 6,940 OD 768 / 2,520 ID 287 / 943 OD 2,159 / 4,759 ID 5,767 / 12,714 PTO (120 kw / 163 HP) -20 / +40 (+55 optional) Drum dimensions and capacities Slickline Drum Dimension mm / inch (size 1) OD 600 / 23.62 ID 350 / 13.78 W 692 / 27.24 Slickline capacity inch: m / ft 0.092: 22,800 / 74,800 0.108: 16,800 / 55,000 0.125: 12,500 / 41,000 Slickline Drum Dimension mm / inch (size 2) OD 700 / 27.56 ID 480 / 18.90 W 692 / 27.24 Slickline capacity inch: m / ft 0.150: 9,300 / 30,500 0.160: 8,500 / 28,000 E-Line Drum Dimension mm / inch (size 1) OD 700 / 27.56 ID 262 / 10.31 W 692 / 27.24 E-Line capacity inch: m / ft 3/16: 11,000 / 36,000 7/32: 8,400 / 27,500 1/4: 6,300 / 20,650 Dimensions Length mm / ft 7,300 / 23.95 Width mm / ft 2,550 / 8.37 Height mm / ft 2,775 / 9.10 Weight without wire and truck kg / lbs 14,500 / 32,000 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A1-001 Rev.01

Truck-mounted Wireline Units Wireline Unit PP Swap Body 24ft Wireline Units & Accessories back Profile The KOLLER Wireline Truck has been developed for carrying out measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. Flexibility, high speed and high pull force at any depth characterize our Wireline Winches. Our designs are developed by close association with our customers. The unit can be placed on trucks from various manufacturers. The layout of the workshop and operator area is free configurable by the customer. stepless hydraulic drive by own power pack (PP) high pull force in combination with high operation speed high performance along the whole depth KOLLER quick drum change system parallel-working independent electrical and hydraulic backup tension system on measuring head air or manual driven hydraulic pump with backup function ergonomically designed operator area mounting possible on different truck chassis sliding roof above winch area provide an unrestricted view on operations racks for tools with pneumatic locking system for secure transportation CE conform design Options integrated pressure and grease control panel workshop area individually equipped according to customer requirements constant speed Well Servicing Products A1-002

Wireline Unit PP Swap Body 24ft Specifications Speed m/min / ft/min (SL Drum Size 1) Max. pullforce kg / lbs (SL Drum Size 1) Speed m/min / ft/min (SL Drum Size 2) Max. pullforce kg / lbs (SL Drum Size 2) Speed m/min / ft/min (EL Drum Size 1) Max. pullforce kg / lbs (EL Drum Size 1) OD 660 / 2,165 ID 385 / 1,263 OD 2,518 / 5,551 ID 4,317 / 9,517 OD 768 / 2,520 ID 527 / 1,728 OD 2,159 / 4,759 ID 3,148 / 6,940 OD 768 / 2,520 ID 287 / 943 OD 2,159 / 4,759 ID 5,767 / 12,714 Winch driven by power pack (96,5 kw / 131 HP) Range of ambient C -20 / +40 (+55 optional) Drum dimensions and capacities Slickline Drum Dimension mm / inch (size 1) OD 600 / 23.62 ID 350 / 13.78 W 692 / 27.24 Slickline capacity inch: m / ft 0.092: 22,800 / 74,800 0.108: 16,800 / 55,000 0.125: 12,500 / 41,000 Slickline Drum Dimension mm / inch (size 2) OD 700 / 27.56 ID 480 / 18.90 W 692 / 27.24 Slickline capacity inch: m / ft 0.150: 9,300 / 30,500 0.160: 8,500 / 28,000 E-Line Drum Dimension mm / inch (size 1) OD 700 / 27.56 ID 262 / 10.31 W 692 / 27.24 E-Line capacity inch: m / ft 3/16: 11,000 / 36,000 7/32: 8,400 / 27,500 1/4: 6,300 / 20,650 Dimensions Length mm / ft 7,300 / 23.95 Width mm / ft 2,550 / 8.37 Height mm / ft 2,775 / 9.10 Weight without wire and truck kg / lbs 14,500 / 32,000 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A1-002 Rev.01

Truck-mounted Wireline Units Wireline Unit Fixed Body 15ft Wireline Units & Accessories back Profile KOLLER Wireline Units have been developed for carrying out measurements and workover activities with wire requirements above 7,650 m / 25,000 ft. Flexibility, high speed and high pull force at any depth characterize our Wireline Winches. Our designs are developed by close association with our customers. These type of unit can be placed on trucks from various manufacturers. The layout of the workshop and operator area is free configurable by the customer. Options control equipment with integrated pressure and grease control panel workshop area individually equipped according to customer requirements constant speed for winch drive double drum system (special truck requirements) single drum system stepless hydraulic drive by truck engine via power take off (PTO) high pull force in combination with high operation speed high performance along the whole depth KOLLER quick drum change system parallel-working independent electrical and hydraulic backup tension system on measuring head ergonomically designed operator area mounting possible on different truck chassis sliding roof above winch area provide an unrestricted view on operations racks for tools compact dimensions 4 x 4 chassis high manoeuvrability CE conform design Well Servicing Products A1-003

Wireline Unit Fixed Body 15ft Specifications Speed m/min / ft/min (SL Drum Size 1) Max. pullforce kg / lbs (SL Drum Size 1) Speed m/min / ft/min (SL Drum Size 2) Max. pullforce kg / lbs (SL Drum Size 2) Speed m/min / ft/min (EL Drum Size 1) Max. pullforce kg / lbs (EL Drum Size 1) Winch driven by Range of ambient C OD 660 / 2,165 ID 385 / 1,263 OD 2,518 / 5,551 ID 4,317 / 9,517 OD 768 / 2,520 ID 527 / 1,728 OD 2,159 / 4,759 ID 3,148 / 6,940 OD 768 / 2,520 ID 287 / 943 OD 2,159 / 4,759 ID 5,767 / 12,714 power take off (PTO) -20 / +40 (+55 optional) Drum dimensions and capacities Slickline Drum Dimension mm / inch (size 1) OD 600 / 23.62 ID 358 / 14.09 W 692 / 27.24 Slickline capacity inch: m / ft 0.092: 22,800 / 74,800 0.108: 16,800 / 55,000 0.125: 12,500 / 41,000 Slickline Drum Dimension mm / inch (size 2) OD 700 / 27.56 ID 480 / 18.90 W 692 / 27.24 Slickline capacity inch: m / ft 0.150: 9,300 / 30,500 0.160: 8,500 / 28,000 E-Line Drum Dimension mm / inch (size 1) OD 700 / 27.56 ID 262 / 10.31 W 692 / 27.24 E-Line capacity inch: m / ft 3/16: 11,000 / 36,000 7/32: 8,400 / 27,500 1/4: 6,300 / 20,650 Dimensions Length mm / ft 4,552 / 14.93 Width mm / ft 2,500 / 8.2 Height mm / ft 2,238 / 7.34 Weight incl. truck without wire kg / lbs 11,110 / 24,493 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A1-003 Rev.01

Truck-mounted Wireline Units Logging Unit Fixed Body 24ft Wireline Units & Accessories back Profile The KOLLER Logging Unit has been developed for carrying out measurements and workover activities with wire capacities up to 7,650 m / 25,000 ft. Flexibility, slow and high speeds as well as high pull force at any depth characterize our Logging Winches. Electrically or hydraulically driven pumps & motors, controlled by joysticks. Our designs are developed by close association with our customers. The unit can be placed on trucks from various manufacturers. The layout of the workshop and operator area is free configurable by the customer. Options integrated grease injection pump inclusive grease control panel workshop area equipped as indicated by customer 19 computer rack with safety switch if required constant drum speed function 12 kva hydraulic generator & 15 kva diesel genrator as backup 230 V / 110 V converter air conditioner Diesel park heater stepless hydraulic drive by truck power take-off (PTO) high pull force in combination with high operation speed high performance along the whole depth 2 step gear for speeds of 0.5 m - 150 m/min KOLLER quick drum change system independent parallel-working electrical depth and tension backup systems on measuring head very slow speeds for logging operation ergonomically designed operator area truck engine controlled from operator station mounting possible on different truck chassis sliding roof above winch area provides an unrestricted view of operations racks for tools with pneumatic locking system for secure transportation - optional up to 7 m long tools CE conform design storage box for radioactive sources storage box with vice slip ring collector LED lights & sockets 230 V AC / 24 V DC, configurable by customer intercom system also with ATEX approved speaker and cable reel wire oiler, cable cleaner constant speed Well Servicing Products A1-004

Logging Unit Fixed Body 24ft Specifications Speed m/min / ft/min (Multi Conductor Drum) Max. pullforce kg / lbs (Multi Conductor Drum) Speed m/min / ft/min (BL / Mono Conductor Drum) Max. pullforce kg / lbs (BL / Mono Conductor Drum) Winch drive by Range of ambient C 0.5-150 / 1.64-492 4,535 / 10,000 OD 500 / 1,640 ID 200 / 656 OD 2,600 / 8,530 ID 6,500 / 21,325 PTO -20 / +40 (-40 / +55 optional) Drum dimensions and capacities Multi Conductor Drum Dimension mm / inch OD 1,372 / 54.00 ID 521 / 20.50 W 864 / 34.00 Capacity inch: m / ft 3/8: 13,900 / 45,603 7/16: 10,600 / 35,777 15/32: 9,100 / 29,855 17/32: 7,100 / 23,293 BL / Mono Conductor Drum Dimension mm / inch OD 1000 / 39.37 ID 400 / 15.75 W 666 / 26.22 Capacity inch: m / ft 7/32: 16,300 / 53,477 9/32: 9,700 / 31,824 5/16: 7,100 / 23,293 Different split drum configurations available. Dimensions Length mm / ft 10,600 / 34.78 Width mm / ft 2,550 / 8.37 Height mm / ft 3,950 / 12.96 Weight max. kg / lbs 26,000 / 57.320 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A1-004 Rev.01

Wireline Skid Units Offshore Wireline Unit Wireline Units & Accessories back Profile The KOLLER Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic system. The optional available battery startup makes the system independent of any external power supply. high pull force in combination with a high operation speed high performance along the whole depth KOLLER quick drum change system ergonomically designed operator area pneumatic system startup powerful hydraulic winch system roof flap (winch room) with gas springs parallel-working independent electrical, hydraulic and mechanic backup system on the measuring head lifting eyes and forklift pockets enable easy moving DNV 2.7-1 Frame, third party approval Options Atex 94/9/EC, Zone II, T3, Gas Group II A integrated pressure and grease control panel electric starter by battery winch modul up to 5/16 constant speed Well Servicing Products A2-001

Offshore Wireline Unit Specifications Speed m/min / ft/min (SL Drum Size 1) Max. pullforce kg / lbs (SL Drum Size 1) Speed m/min / ft/min (SL Drum Size 2) Max. pullforce kg / lbs (SL Drum Size 2) Speed m/min / ft/min (EL Drum) Max. pullforce kg / lbs (EL Drum) Winch driven by OD 3-660 / 9.85-2,165 ID 1-385 / 3.28-1,263 OD 2,518 / 5,551 ID 4,317 / 9,517 OD 768 / 2,520 ID 527 / 1,728 OD 2,159 / 4,759 ID 3,148 / 6,940 OD 768 / 2,520 ID 287 / 943 OD 2,159 / 4,759 ID 5,767 / 12,714 power pack (96.5 kw / 131 hp) Fuel tank capacity l 120 Drum dimensions and capacities Slickline Drum Dimension mm / inch (size 1) OD 600 / 23.62 ID 350 / 13.78 W 692 / 27.24 Slickline capacity inch: m / ft 0.092: 22,800 / 74,800 0.108: 16,800 / 55,000 0.125: 12,500 / 41,000 Slickline Drum Dimension mm / inch (size 2) OD 700 / 27.56 ID 480 / 18.90 W 692 / 27.24 Slickline capacity inch: m / ft 0.150: 9,300 / 30,500 0.160: 8,500 / 28,000 E-Line Drum Dimension mm / inch OD 700 / 27.56 ID 262 / 10.31 W 692 / 27.24 E-Line capacity inch: m / ft 3/16: 11,000 / 36,000 7/32: 8,400 / 27,500 1/4: 6,300 / 20,650 Dimensions Length mm / ft 3,500 / 11.48 Width mm / ft 1,400 / 4.59 Height mm / ft 2,600 / 8.53 Tare weight of single drum setup kg / lbs 4,700 / 10,362 Tare weight of double drum setup kg / lbs 5,200 / 11,464 Max. gross weight kg / lbs 8,500 / 18,739 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A2-001 Rev.02

Wireline Skid Units Offshore Wireline Unit Benefits Designed and manufactured in Germany. Wireline Units & Accessories back High efficient ATEX modification: Maintenance free flame traps with ceramic surface High operational availability Fault analytic engine system: Installed in operator cab Better analyze of the following security function of: Overpressure Oil temperature Low oil pressure Exhaust temperature Over speed Coolant temperature Engine monitoring system Customer specific programmable Monitoring of all relevant engine data Heavy duty 16 or optional 20 Measuring head: 9,000 / 18,000 pounds line tension Hydraulic and electrical load cell for independent security of operation date Hydraulic supported guide bar for lift and lowering of 20 measuring head Heavy duty duplex chain drive Quick drum change system Easy and fast drum change through forced guidance during assembly and disassembly No drum adjustments necessary Heavy duty duplex chain drive Well Servicing Products

Offshore Wireline Unit Benefits Powerful engine with 131 HP in continuous operation: For basic and advanced slickline/e-line operations or heavy duty fishing operations Higher flexibility and full performance over the whole well depth Enable a higher pull force in combination with a higher operation speed Faster acceleration with heavy tools Hydraulic-driven cooling fan Different engine start options Electrical start Hydraulic start Air pressure start Jump start Powerful hydraulic winch drive T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone

Wireline Skid Units 3-split Offshore Wireline Unit Wireline Units & Accessories back Profile The KOLLER 3-split Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. The 3-skid layout is separated in a winch, an operators and a hydraulic power pack container. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. winch skid with a minimal footprint of 2.5 sq m hydraulic power pack with 96,5 kw 4-cylinder diesel engine powerful hydraulic winch system high performance along the whole depth high pull force in combination with a high operation speed KOLLER quick drum change system hydraulic tension gauge mechanical depth counter frames in DNV 2.7-1 standard, third party approval lifting eyes and forklift pockets enable easy moving Options Atex 94/9/EC, Zone II, T3, Gas Group II A winch modul up to 5/16 constant speed Well Servicing Products A2-002

3-split Offshore Wireline Unit Winch container Operators place Power pack Specifications Speed m/min / ft/min (SL Drum Size 1) Max. pullforce kg / lbs (SL Drum Size 1) Speed m/min / ft/min (SL Drum Size 2) Max. pullforce kg / lbs (SL Drum Size 2) Speed m/min / ft/min (EL Drum) Max. pullforce kg / lbs (EL Drum) Winch driven by Dimensions (3-split layout) Winch container Operators container Power pack Length mm / ft 1,800 / 5.90 1,400 / 4.59 1,400 / 4.59 Width mm / ft 1,400 / 4.59 1,400 / 4.59 1,400 / 4.59 Height mm / ft 2,500 / 8.20 **2,500 / 8.20 2,500 / 8.20 Tare weight kg / lbs *2,210 / 4,872 1,650 / 3,638 2,500 / 5,512 Max. gross weight kg 4,800 / 10,582 2,500 / 5,512 2,800 / 6,173 / lbs *without drum **without air conditioning OD 3-660 / 9.85-2,165 ID 1-385 / 3.28-1,263 OD 2,518 / 5,551 ID 4,317 / 9,517 OD 768 / 2,520 ID 527 / 1,728 OD 2,159 / 4,759 ID 3,148 / 6,940 OD 768 / 2,520 ID 287 / 943 OD 2,159 / 4,759 ID 5,767 / 12,714 power pack (96.5 kw / 131 hp) Fuel tank capacity l 120 Drum dimensions and capacities Slickline Drum Dimension mm / inch (size 1) Slickline capacity inch: m / ft Slickline Drum Dimension mm / inch (size 2) Slickline capacity inch: m / ft E-Line Drum Dimension mm / inch OD 600 / 23.62 ID 350 / 13.78 W 692 / 27.24 0.092: 22,800 / 74,800 0.108: 16,800 / 55,000 0.125: 12,500 / 41,000 OD 700 / 27.56 ID 480 / 18.90 W 692 / 27.24 0.150: 9,300 / 30,500 0.160: 8,500 / 28,000 OD 700 / 27.56 ID 262 / 10.31 W 692 / 27.24 E-Line capacity inch: m / ft 3/16: 11,000 / 36,000 7/32: 8,400 / 27,500 1/4: 6,300 / 20,650 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A2-002 Rev.02

Wireline Skid Units Lightweight Wireline Unit Wireline Units & Accessories back Profile The KOLLER Light Weight Wireline Unit has been designed for workover activities with wire capacities above 7,650 m / 25,000 ft. The 2-skid layout is separated in a winch / operators container and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The startup by spring starter makes the system independent of any external power supply. winch skid with a minimal footprint of 2.5 sq m hydraulic power pack with 59 kw 4-cylinder diesel engine independent system start by spring starter, battery free system powerful closed loop hydraulic winch system high performance along the whole depth high pull force in combination with a high operation speed KOLLER quick drum change system hydraulic tension gauge mechanical depth counter winch skid frame in DNV 2.7-3 standard, power pack frame in DNV 2.7-1 standard, third party approval lifting eyes and forklift pockets enable easy moving jacking wheels for easy moving on the platform on request Options Atex 94/9/EC, Zone II, T3, Gas Group II A Well Servicing Products A2-003

Lightweight Wireline Unit Specifications Speed m/min / ft/ min Max. pull force kg / lbs Winch driven by OD 3-450 / 9.85-1,476 ID 1-240 / 3.28-787 OD 2,518 / 5,551 ID 4,317 / 9,517 Diesel hydraulic power pack (59 kw) Fuel tank capacity l 110 Drum dimensions and capacities Slickline Drum Dimension mm / inch OD 600 / 23.62 ID 350 / 13.78 W 692 / 27.24 Slickline capacity inch: m / ft 0.092: 22,800 / 74,800 0.108: 16,800 / 55,000 0.125: 12,500 / 41,000 Winch skid dimensions Length mm / ft 2,070 / 6.78 Width mm / ft 1,240 / 4.07 Height mm / ft 1,450 / 8.53 Weight without drum kg / lbs 1,250 / 2,756 Hydraulic power pack dimensions Length mm / ft 2,000 / 6.56 Width mm / ft 1,100 / 3.61 Height mm / ft 1,415 / 4.63 Weight kg / lbs 1,600 / 3,527 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A2-003 Rev.02

Wireline Skid Units 2-split Offshore Wireline Unit Wireline Units & Accessories back Profile The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic system. The optional available battery startup makes the system independent of any external power supply. high pull force in combination with a high operation speed high performance along the entire well depth KOLLER quick drum change system ergonomically designed operator area pneumatic system startup powerful hydraulic winch system roof flap (winch room) with gas springs parallel-working independent electrical, hydraulic and mechanic backup system on the measuring head lifting eyes and forklift pockets enable easy moving DNV 2.7-1 Frame, third party approval Options ATEX 94/9/EC, Zone II 3G IIA T3 control equipment with integrated pressure and grease control panel electric starter by battery winch modul up to 5/16 constant speed for winch drive Well Servicing Products A2-004

2-split Offshore Wireline Unit Specifications Speed m/min / ft/min (SL Drum Size 1) Max. pullforce kg / lbs (SL Drum Size 1) Speed m/min / ft/min (SL Drum Size 2) Max. pullforce kg / lbs (SL Drum Size 2) Speed m/min / ft/min (EL Drum) Max. pullforce kg / lbs (EL Drum) Winch driven by OD 3-660 / 9.85-2,165 ID 1-385 / 3.28-1,263 OD 2,518 / 5,551 ID 4,317 / 9,517 OD 768 / 2,520 ID 527 / 1,728 OD 2,159 / 4,759 ID 3,148 / 6,940 OD 768 / 2,520 ID 287 / 943 OD 2,159 / 4,759 ID 5,767 / 12,714 power pack (96.5 kw / 131 hp) Fuel tank capacity l 120 Drum dimensions and capacities Slickline Drum Dimension mm / inch (size 1) OD 600 / 23.62 ID 350 / 13.78 W 692 / 27.24 Slickline capacity inch: m / ft 0.092: 22,800 / 74,800 0.108: 16,800 / 55,000 0.125: 12,500 / 41,000 Slickline Drum Dimension mm / inch (size 2) OD 700 / 27.56 ID 446 / 17,56 W 692 / 27.24 Slickline capacity inch: m / ft 0.150: 9,300 / 30,500 0.160: 8,500 / 28,000 E-Line Drum Dimension mm / inch OD 700 / 27.56 ID 262 / 10.31 W 692 / 27.24 E-Line capacity inch: m / ft 3/16: 11,000 / 36,000 7/32: 8,000 / 26,246 1/4: 6,300 / 20,650 Dimensions (2-split layout) Winch container Operator s container/ Power pack Length mm/ft 1,800 / 5.90 2,250 / 7.38 Width mm/ft 1,400 / 4.59 1,400 / 4.59 Height mm/ft 2,500 / 8.20 2,850 / 9.35 Tare weight kg/lbs *2,400 / 5,291 3,760 / 8,289 Max. gross weight kg/lbs 5,000 / 11,023 5,000 / 11,023 *without drum T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A2-004 Rev.01

Wireline Skid Units Slickline Alu Unit Wireline Units & Accessories back Profile The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular system is very flexible enabling a set up with or without cabin. Not using the cabin, more or thicker wire can be spooled before the weight restrictions are reached. winch skid incl. cabine with a minimal footprint of 3.8 sq m hydraulic power pack with 59 kw 4-cylinder diesel engine independent system, start by spring starter, battery free system powerful closed loop hydraulic winch system high performance along the whole well depth high pull force in combination with high speed KOLLER quick drum change system hydraulic tension gauge mechanical depth counter skid frame design for boat or helicopter transport lifting eyes and forklift pockets enable easy transport jacking wheels enable free movement on the platform Options Atex 94/9/EC, Zone II, T3, Gas Group II A digital winchman`s panel (electric rig supply required) AC for cabine (electric rig supply required) Well Servicing Products A2-005

Slickline Alu Unit Specifications Speed m/min / ft/min OD 3-470 / 9.85-1,541 ID 2-340 / 6.56-1,115 Max. pull force kg / lbs OD 2,518 / 5,551 ID 3,500 / 7,710 Winch driven by Diesel hydraulic power pack (59 kw) Fuel tank capacity l 65 Drum dimensions and capacities Slickline Drum Dimension mm / inch OD 500 / 19.69 ID 350 / 13.78 W 692 / 27.24 Slickline capacity inch: m / ft 0.092: 11,430 / 37,500 0.108: 8,380 / 27,500 0.125: 6,100 / 20,000 Winch skid dimensions Length mm / ft 2,825 / 9.27 Width mm / ft 1,342 / 4.40 Height mm / ft 1,780 / 5.84 Weight without wire kg / lbs 930 / 2,050 Hydraulic power pack dimensions Length mm / ft 1,670 / 5.48 Width mm / ft 1,360 / 4.46 Height mm / ft 1,630 / 5.35 Weight kg / lbs 1,220 / 2,689 (ready for use) T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A2-005 Rev.01

Containerized Wireline Units Wireline Container Unit 20ft Wireline Units & Accessories back Profile The KOLLER Wireline 20 ft Container Unit has been developed for carrying out measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the features are the high quality hydraulic components. A Rig Safe configuration of the Wireline Units available as an option. high pull force in combination with high operation speed high performance along the whole depth KOLLER quick drum change system ergonomically designed operator area powerful hydraulic winch system hydraulic roof flap (85 for drum change and optional view) parallel-working independent electrical and hydraulic backup tension system on measuring head 20 ft high cube container (ISO Dimensions) Options Rig-safe configuration 20 ft standard height container (ISO Dimensions) integrated pressure and grease control panel winch modul up to 5/16 constant speed Well Servicing Products A3-001

Wireline Container Unit 20ft Specifications Speed m/min / ft/min (SL Drum Size 1) Max. pullforce kg / lbs (SL Drum Size 1) Speed m/min / ft/min (SL Drum Size 2) Max. pullforce kg / lbs (SL Drum Size 2) Speed m/min / ft/min (EL Drum) Max. pullforce kg / lbs (EL Drum) Winch driven by OD 3-660 / 9.85-2,165 ID 1-385 / 3.28-1,263 OD 2,518 / 5,551 ID 4,317 / 9,517 OD 768 / 2,520 ID 527 / 1,728 OD 2,159 / 4,759 ID 3,148 / 6,940 OD 768 / 2,520 ID 287 / 943 OD 2,159 / 4,759 ID 5,767 / 12,714 power pack (96.5 kw / 131 hp) Fuel tank capacity l 120 Drum dimensions and capacities Slickline Drum Dimension mm / inch (size 1) OD 600 / 23.62 ID 350 / 13.78 W 692 / 27.24 Slickline capacity inch: m / ft 0.092: 22,800 / 74,800 0.108: 16,800 / 55,000 0.125: 12,500 / 41,000 Slickline Drum Dimension mm / inch (size 2) OD 700 / 27.56 ID 480 / 18.90 W 692 / 27.24 Slickline capacity inch: m / ft 0.150: 9,300 / 30,500 0.160: 8,500 / 28,000 E-Line Drum Dimension mm / inch OD 700 / 27.56 ID 262 / 10.31 W 692 / 27.24 E-Line capacity inch: m / ft 3/16: 11,000 / 36,000 7/32: 8,400 / 27,500 1/4: 6,300 / 20,650 Container Dimensions (high cube) Length mm / ft 6,096 / 20 Width mm / ft 2,438 / 8 Height mm / ft 2,926 / 9.6 Weight without wire kg / lbs 11,000 / 24,251 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A3-001 Rev.02

Wireline Crane Units Wireline Crane Unit Wireline Units & Accessories back Profile The KOLLER Wireline crane unit combines a wireline unit and a telescope crane mounted on a heavy duty off-road chassis. It has been designed for measurement and workover activities with wire capacities above 7,650 m / 25,000 ft. Both Slickline and E-Line jobs can be performed. Flexibility, high speed and high pull force at any depth characterize our wireline winches. Our designs are developed by close association with our customers. stepless hydraulic drive by power take off (PTO) extremely short rig-up time (less than 10 min.) KOLLER quick drum change system winch area protected with roll-up tarpaulin cover turnable cabin up to +/- 20 mounting on a HD MAN chassis air or manual driven hydraulic pump with backup function (PCE) covered trays for hose reels in different variations available CE conform design Options turnable cabin up to +/- 60 comfortable pressure control panel, selectable functions constant speed Well Servicing Products A4-001

Wireline Crane Unit Specifications Speed m/min / ft/min (SL Drum Size 1) Max. pullforce kg / lbs (SL Drum Size 1) Speed m/min / ft/min (SL Drum Size 2) Max. pullforce kg / lbs (SL Drum Size 2) Speed m/min / ft/min (BL Drum Size 1) Max. pullforce kg / lbs (EL Drum) Winch driven by OD 3-660 / 9.85-2,165 ID 1-385 / 3.28-1,263 OD 2,518 / 5,551 ID 4,317 / 9,517 OD 768 / 2,520 ID 527 / 1,728 OD 2,159 / 4,759 ID 3,148 / 6,940 OD 768 / 2,520 ID 287 / 943 OD 2,159 / 4,759 ID 5,767 / 12,714 PTO (120 kw / 161 hp) Drum dimensions and capacities Slickline Drum Dimension mm / inch (size 1) OD 600 / 23.62 ID 350 / 13.78 W 692 / 27.24 Slickline capacity inch: m / ft 0.092: 22,800 / 74,800 0.108: 16,800 / 55,000 0.125: 12,500 / 41,000 Slickline Drum Dimension mm / inch (size 2) OD 700 / 27.56 ID 480 / 18.90 W 692 / 27.24 Slickline capacity inch: m / ft 0.150: 9,300 / 30,500 0.160: 8,500 / 28,000 E-Line Drum Dimension mm / inch OD 700 / 27.56 ID 262 / 10.31 W 692 / 27.24 E-Line capacity inch: m / ft 3/16: 11,000 / 36,000 7/32: 8,400 / 27,500 1/4: 6,300 / 20,650 Dimensions Total length mm / ft 12,000 / 39.37 Width mm / ft 2,550 / 8.37 (without outriggers) 6,170 / 20.24 (with outriggers) Height mm / ft 4,190 / 13.75 Gross weight kg / lbs 28,000 / 61,730 (without wire) Specifications of Cabin / Crane Swivel radius of cabin Crane capacity Crane radius Boom length Max. hook load +/- 20 (+/- 60 optional) 1.5 t / 3,300 lbs at radius of 15 m / 49 ft 370 (continous rotation available) 27.5 m / 90 ft 3.49 t / 7,694 lbs T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A4-001 Rev.01

Wireline Accessories Grease Injection Pump Wireline Units & Accessories back Profile The KOLLER Grease Injection Double Pump Unit has been designed for grease injection activities around the blow out preventer arrangements in the harsh oilfield environment The compact carbon steel skid with the extra small footprint carries 2 high performance grease pumps for up to 5,076 psi (350 bar), a 208 l (full barrel size) grease tank, a full size barrel to collect the rejected dump grease, two hose reels and a stainless steel operator panel. Air maintenance unit close to air connection including pressure regulator, water separator and air oiler Two independent operating grease pumps Two ½ spring reverted 20 m hose reels with guide bars Stainless steel operator panel with engraved symbols Weather and transport protection for the operator panel ½ Air inlet connection Safe storage for a full size barrel Well Servicing Products A9-001

Grease Injection Pump Dimensions Length Width Height Max. gross weight 710 mm / 2.33 ft 1,266 mm / 4.15 ft 1,809 mm / 5.93 ft 475 kg / 1,047 lbs Specification Air inlet Max. grease pressure Grease type 8 bar / 116 psi 350 bar / 5,076 psi Aviacticon GX-FL or similar T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A9-001 Rev.01

Wireline Accessories Crane Support Truck Wireline Units & Accessories back Profile KOLLER Crane Support Truck is used to lift and transport loads up to 3.5 tonnes. The crane can be used as an auxiliary crane to assist with wireline jobs in the oil field. This includes, for example, the construction and dismantling of the lubricator and the BOP`s. A BOP-rack and a Tool-rack are mounted on the trailer. The automatic trailer coupling is designed for trailers with a vertical load up to 1000 kg. It is possible to transport a 10 ft ISO standard containers on this trailer. Transport-Basket for BOP-Rack with return and suction connections Tool-Rack for Lubricator-Pipe removable transport frame for the BOP with oil tank crane tested according to ISO 4305-1991 loading area for equipment with lashing points foldable platform gates with steps crane control with double-sided access PTO drive for crane and compressor stowage compartments on both sides additional compressor (example for using air operated tools) designed according to: SAE J1063 - structural dimensioning SAE J765 - stability dimensioning ASME 30.5 -crane standard Well Servicing Products A9-002

Crane Support Truck Dimensions Length Width incl. mirrors Height Total weight 11,500 mm / 37.72 ft 2,900 mm / 9.51 ft 4,127 mm / 13.54 ft 33,000 kg / 72,752 lbs Ambient temperature < 50 C Engine Engine power PTO 1 crane PTO 2 compressor Diesel tank 400 PS / 294 kw 2,400 rpm 1,300 rpm 400 l Hydraulic Hydraulic tank 250 l Hydraulic oil HLP 68 Max. pressure crane 270 bar Max. pressure compressor 160 bar Air pressure system Air pressure bar Delivery Compressor Delivery Truck Air Circuit 8,5 bar 745 l/min / 12.4 l/s 390 l/min / 6.5 l/s Crane Max. hook load 3,5 t / 7,716 lbs Tool Rack Tool Sizes 2 x 7, 2 x 5, 4 x 3 Transport Rack Tank volume 55 l T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A9-002 Rev.01

Wireline Accessories Wireline Spooling Unit Profile Wireline Units & Accessories back The KOLLER Spooling Unit serves to spool slickline or wireline from a transport drum onto a winch drum. It`s a skid-mounted design with electro/hydraulic drive. compact skid design intergrated electric driven hydraulic system simple operation with over tension protection adaptable to wide range of transport drums suitable for slickline up to 0.180 suitable for braided line up to 5/16 maximum transport drum diameter 1,250 mm CE-marked movable drip pan unter the transport drum mounting plates on each corner for proper fixture to the ground weather tarpaulin cover in RAL 3002 for the entire unit (or other available RAL shade) Dimensions Length mm / ft 2,800 / 9.19 Width mm / ft 2,150 / 7.05 Height mm / ft 1,909 / 6.26 Transport drum dimensions Drum width, max. mm / ft 1,050 / 3.44 Transport drum weight max. kg / lbs 1,200 / 2,645 Weight Spooling Unit kg / lbs 3,000 / 6,613 Transport drum weight max. kg / lbs 2,500 / 5,511 Forces / speeds Wireline/cable speed Tensions head m/min ft/min 60 197 Transport drum m/min 40-100 (dependet upon the drum diameter) Slickline diameter, max. 0.180 Cable diameter, max. 5/16 Wireline/cable pull force. max. (braking force) N/kg/lbs 20,000/ 2,038/4.490 Torque at the transport drum, max. Nm 340 Electric motor Power supply VAC/A 400 / 3*125 Frequency Hz 50 Speed 1/min 1,475 Power kw 15 Enviroment Ambient temperature C -20 to +50 Well Servicing Products A9-003

Wireline Accessories Wireline Spooling Stand Wireline Units & Accessories back Profile The Koller spooling stand can be used to spool and unspool cable from a drum mounted in the Spooling Unit or a Wireline Unit. To maintain the tension on the wire is winded around two large capstan wheels. Dimensions Length mm/ft 6,010/19.72 Width mm/ft 2,230/7.32 Height mm/ft 2,060/6.76 Weight kg/lbs 3,850/8,487.79 (depending on chassis and equipment) Data in tensioning mode (with ATS = automatic tensioning system) Maximum tensioning force dan 4,000 Speed m/min ft/min 90 295 Speed m/min ft/min 90 295 (at maximum tensioning force) Minimum tensioning force with ATS dan Approx. 400 Data in pulling mode Maximum pulling force dan 4,000 Maximum speed m/min ft/min 90 295 at 400 dan pulling force Speed at maximum 20 66 pulling force Grooved wheel drive Grooved wheel diameter mm/in 1,400/55,12 Groove diameter mm/in 15/0,59 Number of grooves 5 Electric motor Power supply VAC A 400 3*125 Frequency Hz 50 Speed 1/min 1,475 Power kw 15 Drum stand Drum diameter max mm/in 1,800/70,87 Drum width. max. mm/in 1,440/56,69 Drum weight max kg/lbs 6,000/13,227 Drum borehole mm/in 80-125 / 3,15-4,92 Rope Diameter max. mm/in 12,5 / 0,49 Well Servicing Products A9-004

Wireline Accessories Aluminum 70 ft Articulated Mast for Slickline and Wireline Wireline Units & Accessories back Transport position Profile The KOLLER Aluminum Articulated Mast has been designed to support slickline and wireline well intervention. The support of rig up, rig down and operational forces are the main purpose of the mast. One main and two auxiliary winches assist the operator by lifting pressure control equipment. The slickline wire or the wireline cable can be taken by the mast top sheave, by a separate top sheave lifted by one auxiliary winch or by a top sheave mounted on top of the PCE. The lightweight aluminum design allows helicopter transports and low capacity crane lifts. A hydraulic rig up and rig down of the mast makes the mast operation easy for the crew. Aluminum lattice mast design DNVGL-ST-0378 certificate for Standard for offshore and platform lifting appliances (former DNV 2.22) DNVGL-ST-E273 certificate for Portable offshore units (former DNV 2.7-3; Class R30 for 3 m wave height) 6,500 lbs / 3.000 kg hydraulic main winch (with dual line block; 2,800 lbs / 1.300 kg single line lift) 1,100 lbs / 500 kg hydraulic auxiliary winch (with dual line block; 550 lbs / 250 kg single line lift) 220 lbs / 100 kg manual auxiliary winch Hydraulic controls Hydraulic supply by separate power pack or by KOLLER winch power pack Foldable outriggers for mast support Options Machinery Directive 2006/42/CE declaration of conformity ATEx 2014/34/EU, Zone I declaration of conformity 45 ft and 90 ft mast heights Hydraulic second auxiliary winch Jacking wheels Well Servicing Products A9-005

Aluminum 70 ft Articulated Mast for Slickline and Wireline Specifications Max. Slickline / Wireline pull Safe total mast load Hydr. main winch capacity single line pull dual line pull Hydr. auxiliary winch capacity single line pull dual line pull Manual auxiliary winch capacity Max. wind speeds guyed not guyed rig up / down 2,700 kg / 6,000 lbs 5,450 kg / 12,000 lbs 1,300 kg / 2,800 lbs 2,950 kg / 6,500 lbs 250 kg / 550 lbs 500 kg / 1,100 lbs 100 kg / 220 lbs 60 mph / 27 m/s / 96 km/h / 52 Knots 30 mph / 13 m/s / 47 km/h / 39 Knots 25 mph / 11 m/s / 40 km/h / 21 Knots Temperature range -20 / 50 C / -4 / 122 F Operation dimensions Length incl. outriggers Width incl. outriggers Height Height PCE Max. mast reach 6,700 mm / 21.98 ft 5,100 mm / 16.73 ft 21,900 mm / 79.50 ft 19,800 mm / 65.00 ft (from ground to hook incl. 1,000 mm / 3.28 ft lift) 1,020 mm / 3.90 ft (from mast base structure to PCE center line) Transport dimensions Length Width Height Weight without auxiliary equipment with auxiliary equipment (sheaves, guy wires, etc.) 7,800 mm / 25.60 ft 1,530 mm / 5.00 ft 1,940 mm / 1.94 ft 1,500 kg / 3,300 lbs 1,620 kg / 3,570 lbs Hydraulic supply required Pressure Flow rate 210 bar / 3,000 psi 40 l/min / 10.5 USGal/min T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone A9-005 Rev.01

Content Fluid Pump Units & Accessories Truck & Trailer-mounted Fluid Pump Units Single Pump Trailer 600-580 Liquid Additive Trailer Double Pump Trailer Skid-mounted Fluid Pump Units Offshore Pump Unit K1 Double Pump Skid Unit Single Pump Skid Unit Single Pump Container 600-480 Well Servicing Products

Trailer & Truck-mounted Fluid Pump Units Single Pump Trailer 600-580 Fluid Pump Units & Accessories back Profile The KOLLER Trailer mounted Well Servicing Unit is used for pumping services by the Oil- and Gas industry for wells in harsh environments. The pumping unit is adaptable to permit various liner sizes to be fitted for either high pressure low rate or low pressure high operations within the constraints of the available BHP. Caterpillar C15 engine, 433 kw / 580 HP Allison OFS 4700 transmission SPM TWS 600 S plunger pump ambient temperature 0 C to + 55 C hydraulic driven air condition operator cabine with shock absorbers to prevent harmful vibrations equipped with a hydraulic driven on board booster pump - integrated booster / fill pump to feed the SPM TWS 600 S - possibility of pumping from an external source displacement tank with two components - each 11 bbl H2S resistant Well Servicing Products B1-001

Single Pump Trailer 600-580 Dimensions Length mm / ft (Supplier to provide) 9,950 / 33 Width mm /ft 2,600 / 9 Height mm / ft 4,100 / 13 Weight kg / lbs 16,600 / 36,597 Technical Data Engine Power hp / kw 580 / 433 Shift Engine Speed rpm 2,100 Hydraulic Reservoir l 200 Fuel Reservoir l 400 Lubrication Reservoir l 250 Ambient Temperature C 0 to + 55 Pump Performance with 3.5 Plunger (other diameters on request) Flow Rate / Pressure with 3.5 Plunger 1. gear 2. gear 3. gear 4. gear 5. gear Engine rpm flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar 1400 113.2 1,417.6 246.1 652.1 452.2 354.9 604.0 265.7 863.7 185.8 1600 129.4 1,355.6 281.2 623.6 516.8 339.3 690.3 254.1 987.7 177.7 1800 145.5 1,256.1 316.4 577.9 581.4 314.4 776.6 235.4 1,110.5 164.6 2000 161.7 1,130.5 351.5 520.1 646 283 862.9 211.9 1,233.9 148.2 2070 167.4 1,092.3 363.8 520.5 668.6 273.4 893.1 204.7 1,277.1 143.2 Engine Power Caterpillar C15 580 HP / 433 kw power (kw) 252 288 347 388 406 418 428 433 433 433 433 speed (rpm) 1,100 1,200 1,300 1,400 1,500 1,600 1,700 1,800 1,900 2,000 2,100 torque Nm 2,190 2,292 2,549 2,647 2,585 2,495 2,404 2,297 2,176 2,068 1,967 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone B1-001 Rev.01

Trailer & Truck-mounted Fluid Pump Units Liquid Additive Trailer Fluid Pump Units & Accessories back Profile The KOLLER Liquid Additive Trailer (LA-Trailer) can be used to transport and add onsite additives to the frac fluid. The pumps have a manual and automatic mode. Manual mode: the additives are added manually via a touchpanel and can be adjusted as required. Automatic mode: depending on the volumes the frac pumps are pumping, the additives pumps adjust automatically to ensure a constant concentration of additives in the frac fluid. The pre-programmed concentration can be changed using the control panel. The trailer has a built-in generator making it independent of an additional power source. In the integrated laboratory the parameters of the additives can be continuously observed. The trailer is at present operational in Europe. During the job all relevant data is collected & saved, and thus available for future reference Laboratory and control room with heating / airconditioning Electrical operated Agitators for mixing additives + 8 x IBC s / 1,100 l Electrical level detectors Touchpanel enables control and observation of the pumps, pumped volumes and Shut-off valves CE certified + 2006/42/EG + 94/9/EG Gas warning system monitors the laboratory & tanks Monitoring of potentially explosive atmosphere with a green or red light indication in and outside the trailer Dry clutches for several connections to the Intermediate Bulk Container (IBC) Pneumatic operated hose reels IBC can be loaded-unloaded by forklift over the side doors Well Servicing Products B1-002

Liquid Additive Trailer Dimensions Total length Width Height Gross weight (empty) Max. operating weight 13,600 mm / 44.62 ft 2,520 mm / 8.27 ft 4,000 mm / 13.12 ft 21 t / 46,297 lbs 35 t / 77,161 lbs External ports on Trailer for flushing and filling the tanks with fresh water permanent power supply Generator room Generator (extendable for service) Generator (var. continuous power) Voltage DEUTZ generator drive Screw compressor Fresh water Container volume Separate fresh water tank Storeroom 47,9 / 59,7 kva 400 V AC BF4M2011C 3 kw 2 x 100 l Shower / Labor supply 2 x Mixing tank Content / drive 1,100 l / 1,5 kw 8 x IBC / tank Content 1,100 l (can be filled from the outside with additive) Pump room Pumps for high visc. fluids Viscosity, max. h = 700 mpa s Delivery rate / pressure 6-68 l/min / 15 bar Output power 3.0 kw Pumps for low visc. fluids Viscosity, max. h = 100 mpa s Delivery rate / pressure 1-40 l/min / 15 bar Output power 1.5 kw Hose reel with pneumatic drive 4 x hose (Waukesha) DN 1 1 /4 in 4 x hose (CAT) DN 1 in Hose length 20 m T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone B1-002 Rev.01

Trailer & Truck-mounted Fluid Pump Units Double Pump Trailer Fluid Pump Units & Accessories back Profile The KOLLER Double Pump Trailer is built for pumping fluids. The pump unit is adaptable to permit various liner sizes to be fitted for either high pressure / low rate or low pressure / high rate operations within the constraints of the available BHP. The unit is capable of pumping for prolonged durations. The unit is equipped with two hydraulic driven on board booster/fill pumps. The unit has a displacement tank with two compartments - each 11 bbl. The tanks are installed in such a way that the operator can view the entire tank volume from the operator`s platform. 2x Caterpillar C15 engine, 433 kw / 580 HP 2x Allison OFS 4700 transmission 2x SPM TWS 600S plunger pump equipped with two hydraulic driven on board booster pumps - integrated booster / fill pump to feed the SPM TWS 600 S - possibility to pump from an external source Well Servicing Products B1-003

Double Pump Trailer Dimensions Transport length mm / ft 13,921 / 45.67 (without high-pressure piping) Overall length mm / ft 14,214 / 46.63 (with assembled high-pressure piping) Transport width mm /ft 2,875 / 9.43 Overall width mm / ft 3,926 / 12.88 (completely assembled) Height mm / ft 4,100 / 13.45 Weight kg / lbs 26,500 / 58,422 Technical Data Engine Power hp / kw 2 x 580 / 433 Engine Speed rpm max. 2,070 Hydraulic Reservoir l 350 Fuel Reservoir l 2 x 950 Lubrication Reservoir l 2 x 200 Ambient Temperature C -20 / +50 Flow Rate / Pressure with 3.0 Plunger 1. gear 2. gear 3. gear 4. gear 5. gear engine rpm flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar 1400 83 1,810 181 833 332 453 444 339 635 237 1600 95 1,740 207 801 380 436 507 326 725 228 1800 107 1,617 232 744 427 405 570 303 816 212 2000 119 1,455 258 669 475 364 634 273 906 191 2070 123 1,406 267 647 491 352 656 264 938 184 Flow Rate / Pressure with 3.5 Plunger 1. gear 2. gear 3. gear 4. gear 5. gear engine rpm flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar 1400 113 1,418 246 652 452 355 604 266 864 186 1600 129 1,356 281 624 517 339 690 254 988 178 1800 146 1,256 316 578 581 314 777 235 1,110 165 2000 162 1,130 351 520 646 283 863 212 1,234 148 2070 167 1,092 364 520 669 273 893 205 1,277 143 Engine Power Caterpillar C15 433 kw / 580 HP power (kw) 252 288 347 388 406 418 428 433 433 433 433 speed (rpm) 1,100 1,200 1,300 1,400 1,500 1,600 1,700 1,800 1,900 2,000 2,100 torque Nm 2,190 2,292 2,549 2,647 2,585 2,495 2,404 2,297 2,176 2,068 1,967 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone B1-003 Rev.01

Skid-mounted Fluid Pump Units Offshore Pump Unit K1 Fluid Pump Units & Accessories back Profile The KOLLER Pump Unit K1 is mainly developed for offshore cementing and circulation jobs but also a lightweight, compact solution for onshore operations. The high-performance pump unit is splitted in two easy connect able containers. It is packed with the latest but proven technology. The K1 is movable connected or separately and thus a perfect solution for each well site. MTU 12V 2000 P92 Engine, 700 kw / 938 hp Allison S9806M transmission HT-400 pump, max. 15,000 psi / 1,034 bar Quick locking device for easy mounting and dismounting of the containers CE certified, 94/9/EC (ATEX 95) Zone II 3 G IIA T3 DNV 2.7-1, En BS 12079 & complete DNV approval Max. 27,600 lbs / 12.52 t per container Well Servicing Products B2-001

Offshore Pump Unit K1 Dimensions Total length mm / ft (Motor- / Pump Container) 9,750 / 32.00 (5,250 / 17.22 / 4,460 / 14.63) Width mm / ft 2,000 / 6.56 Height mm / ft 2,600 / 8.53 Gross weight t / lbs (Motor- / Pump Container) approx. 24.54 / 54,100 (approx. 12.52 / 27,600 approx. 12.02 / 26,500) Flow Rate / Pressure Shift 1 l/min / psi 240-300 / 15,000 Shift 2 l/min / psi 330-458 / 10,900 Shift 3 l/min / psi 410-560 / 8,900 Shift 4 l/min / psi 510-700 / 7,150 Shift 5 l/min / psi 570-780 / 6,400 Shift 6 l/min / psi 715-975 / 5,130 Shift 7 l/min / psi 900-1,235 / 4,050 Values are valid for 2,100 rpm (engine) and power input of HT-400 of 800 hp / 590 kw Technical Data Engine power hp / kw 938 / 700 Shift Engine Speed rpm 2,100 Hydraulic reservoir l 150 Fuel reservoir l 1,000 Lubrication reservoir l 70 Fuel consumption 50% power (350 kw) l/h 100% power (700 kw) l/h 90 95 180 190 Ambient temperature C -20 C / +40 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone B2-001 Rev.01

Skid-mounted Fluid Pump Units Double Pump Skid Unit Fluid Pump Units & Accessories back Profile The KOLLER Double Pump Skid Unit is build for pumping fluids. The pump unit is adaptable to permit various liner sizes to be fitted for either high pressure / low rate or low pressure / high rate operations within the constraints of the available BHP. The unit is capable of pumping for prolonged durations. The unit is equipped with two hydraulic driven on board booster/fill pumps. The unit has a displacement tank with two compartments - each 11 bbl. The tank are installed in such a way that the operator can view the entire tank volume from the operator`s platform. 2x Caterpillar C15 engine, 433 kw / 580 HP 2x Allison OFS 4700 transmission 2x SPM TWS 600S plunger pump equipped with two hydraulic driven on board booster pumps - integrated booster / fill pump to feed the SPM TWS 600 S - possibility to pump from an external source complete sun roof to protect the operator and the unit components It is possible to use the unit mounted on a trailer during operation. operator panel protected with doors and shock absorbers Well Servicing Products B2-002

Double Pump Skid Unit Dimensions Length mm / ft 7,200 / 24.00 Width mm /ft 3,000 / 10.00 Height mm / ft 3,182 / 10.40 Weight kg / lbs 23,000 / 50,706 Technical Data Engine Power hp / kw 2x 580 / 433 Shift Engine Speed rpm 2 x 2,100 Hydraulic Reservoir l 350 Fuel Reservoir l 950 Lubrication Reservoir l 2 x 200 Ambient Temperature C 0 / + 55 Pump Performance with 3.5 Plunger (other diameters on request) Flow Rate / Pressure with 3.5 Plunger 1. gear 2. gear 3. gear 4. gear 5. gear engine rpm flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar 1400 113.2 1,417.6 246.1 652.1 452.2 354.9 604.0 265.7 863.7 185.8 1600 129.4 1,355.6 281.2 623.6 516.8 339.3 690.3 254.1 987.7 177.7 1800 145.5 1,256.1 316.4 577.9 581.4 314.4 776.6 235.4 1,110.5 164.6 2000 161.7 1,130.5 351.5 520.1 646.0 283.0 862.9 211.9 1,233.9 148.2 2070 167.4 1,092.3 363.8 520.5 668.6 273.4 893.1 204.7 1,277.1 143.2 Engine Power Caterpillar C15 433 kw / 580 HP power (kw) 252 288 347 388 406 418 428 433 433 433 433 speed (rpm) 1,100 1,200 1,300 1,400 1,500 1,600 1,700 1,800 1,900 2,000 2,100 torque Nm 2,190 2,292 2,549 2,647 2,585 2,495 2,404 2,297 2,176 2,068 1,967 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone B2-002 Rev.01

Skid-mounted Fluid Pump Units Single Pump Skid Unit Fluid Pump Units & Accessories back Profile KOLLER Single Pump Unit to be used for pumping services at Oil & Gas wells in harsh oilfield environments, with temperatures ranging from 0 C to + 55 C. The Single Pump Unit is used to increase the pressureliquid media (inhibited acids, cement slurries, sand ladden fluids, etc.) to an operating pressure of max. 10,000 psi (690 bar). Caterpillar C15 engine, 433 kw / 580 HP Allison OFS 4700 transmission SPM TWS 600S plunger pump equipped with a hydraulic driven on board booster pump - integrated booster / fill pump to feed the SPM TWS 600 S - possibility to pump from an external source complete sun roof to protect the operator and the unit components It is possible to use the unit mounted on a trailer during operation. operator panel protected with doors and shock absorbers Well Servicing Products B2-003

Single Pump Skid Unit Dimensions Length mm / ft 6,058 / 20.00 Width mm /ft 2,438 / 8.00 Height mm / ft (without exhaust) approx. 2,700 / 9.00 Weight kg / lbs 11,500 / 25,353 Technical Data Engine Power hp / kw 580 / 433 Shift Engine Speed rpm 2,100 Hydraulic Reservoir l 200 Fuel Reservoir l 400 Lubrication Reservoir l 250 Ambient Temperature C 0 / + 55 Pump Performance with 3.5 Plunger (other diameters on request) Flow Rate / Pressure with 3.5 Plunger 1. gear 2. gear 3. gear 4. gear 5. gear engine rpm flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar flow / min in l pressure bar 1400 113.2 1,417.6 246.1 652.1 452.2 354.9 604.0 265.7 863.7 185.8 1600 129.4 1,355.6 281.2 623.6 516.8 339.3 690.3 254.1 987.7 177.7 1800 145.5 1,256.1 316.4 577.9 581.4 314.4 776.6 235.4 1,110.5 164.6 2000 161.7 1,130.5 351.5 520.1 646.0 283.0 862.9 211.9 1,233.9 148.2 2070 167.4 1,092.3 363.8 520.5 668.6 273.4 893.1 204.7 1,277.1 143.2 Engine Power Caterpillar C15 433 kw / 580 HP power (kw) 252 288 347 388 406 418 428 433 433 433 433 speed (rpm) 1,100 1,200 1,300 1,400 1,500 1,600 1,700 1,800 1,900 2,000 2,100 torque Nm 2,190 2,292 2,549 2,647 2,585 2,495 2,404 2,297 2,176 2,068 1,967 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone B2-003 Rev.01

Skid-mounted Fluid Pump Units Single Pump Container 600-480 Fluid Pump Units & Accessories back Figure with additional trailer Profile The KOLLER Single Container is designed to pump water, additives, acids and other liquids. The Unit is constructed to operate at a working pressure of 5,000 psi / approx. 345 bar, and is manufactured according to the strict quality guidelines of KOLLER. Dimensions with extensions Length 7,040 mm 23.10 ft Width 2,438 mm 8.00 ft Height 2,800 mm 9.19 ft Weight 12,000 kg 26,455 lbs Caterpillar CX31 transmission Caterpillar C13 engine, 354 kw / 480 HP Triplex Plunger Pump: MSI TI 600 with 4.5 Plunger Booster pump hydraulically driven Container 20 ft Mobile operator panel (built-in operated or wired) Engine room sound-proofed Digital pressure display and pump switch-off at a specific user selected excess pressure Battery charger with external 230 V connection Pre-heating system for 230 V motor Data logger for pressure Ambient temperature -20 C +40 C Possible plunger diameters 2, 2.5, 3, 3.5 or 4, 4.5 depending the fluid end Well Servicing Products B2-004

Single Pump Container 600-480 Flow rate l/min MSI TI600 GD-CX31-ratio 4.6:1 4 plunger engine rpm flow/min in l Caterpillar C13 354 kw 4.4 1. gear 2.33 2. gear 1.53 3. gear 1 4. gear pressure bar flow/min in l pressure bar flow/min in l pressure bar Power (kw) 251 280 307 320 332 344 354 354 354 Speed (rpm) 1,200 1,300 1,400 1,500 1,600 1,700 1,800 1,900 2,000 Torque Nm 1,998 2,062 2,095 2,041 1,987 1,934 1,880 1,781 1,692 flow/min in l pressure bar 1,200 220 468 415 248 632 163 967 106 1,300 238 497 450 263 685 173 1,048 113 1,400 256 516 484 273 737 180 1,128 117 1,600 293 497 553 263 843 173 1,289 113 1,800 330 476 622 252 948 166 1,450 108 2,000 366 428 691 227 1,053 149 1,612 97 2,070 380 414 716 219 1,090 144 1,668 94 Flow rate l/min MSI TI600 GD-CX31-ratio 4.6:1 4.5 plunger 4.4 1. gear 2.33 2. gear 1.53 3. gear 1 4. gear engine rpm flow/min in l pressure bar flow/min in l pressure bar flow/min in l pressure bar flow/min in l pressure bar 1,200 278 370 525 196 800 129 1,224 84 1,300 301 393 569 208 867 137 1,326 189 1,400 325 407 613 216 933 142 1,428 93 1,600 371 393 700 208 1,066 137 1,632 89 1,800 417 376 788 199 1,200 131 1,836 85 2,000 464 339 875 179 1,333 118 2,040 77 2,070 480 327 906 173 1,380 114 2,111 74 At 2,070 r / min, the respective maximum input speed of the MSI-pump reaches according to data sheet T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone B2-004 Rev.01

Content Coiled Tubing Units & Accessories Truck and Trailer-mounted Units Coiled Tubing Trailer Skid-mounted Units Coiled Tubing Skid 100 Offshore Coil Tubing Unit Well Servicing Products

Truck & Trailer-mounted Coiled Tubing Units Coiled Tubing Trailer Coiled Tubing Units & Accessories back Profile The KOLLER Coiled Tubing Trailer has been developed for well stimulation operations in the oilfield. The reel is equipped with a standard pumping swivel. Furthermore the injector has a closed loop hydraulic drive system. For safety requirements the unit is equiped with an emergency air shutdown. heavy duty semi trailer with changeable kingpin (2 /3.5 ) high reel capacity (5,000 m of 1.75 tubing) 80k Injector with closed lube (other possible) hydraulic driven control reels variable displacement pumps, hydraulic controlled liftable operator cabin by scissor jack air condition for environment temperatures up to +60 C Well Servicing Products C1-001

Coiled Tubing Trailer General specifications Tubing reel capacity Engine type Engine output 5,000 m of 1.75 tubing Caterpillar C11 385 hp / 287 kw Injector Max. pullforce Max. hydraulic pressure Max. flow rate BOP control Number of circuits 5 Pressure per circuit Transport dimensions 80,000 lbs / 36,287 kg 5,076 psi / 350 bar 90 US.gal/min / 340 l/min Power reel hoses 2 x 1.5 Max. length of hoses 50 m 3,000 psi / 207 bar Length Width Height Weight (incl. 5,000 m 1.5 tubing) 51.67 ft / 15,750 mm 9.84 ft / 3,000 mm 14.76 ft / 4,500 mm approx. 51.5 t T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone C1-001 Rev.01

Skid-mounted Coiled Tubing Units Coiled Tubing Skid 100 Coiled Tubing Units & Accessories back Profile This KOLLER Coiled Tubing Skid was developed to cement freeze holes up to 350 m depth. The system is designed to use injectors with up to 9 tons / 20,000 lbs pull force. In the present configuration the injector pulls 5 tons / 11,023 lbs. The maximum tubing length on the reel is 1000 m. All the drive and control instruments are placed within a 20ft container. It contains the hydraulic power pack, the air-conditioned operator s cabin, as well as the supply hoses and the test leads. The supply hose reels are hydraulic-driven. The unit is fitted with a safety shutdown (deadman switch). high reel capacity (400 m of 1.25 tubing) heatable hydraulic tank air conditioning and electric heating in the operator s cabin ambient temperature -30 C up to +50 C Caterpillar C6.6 engine, 129 hp / 96,2 kw (engine pre-heater for low temperature applications) Well Servicing Products C2-001

Coiled Tubing Skid 100 Power Pack Container Length 6,058 mm / 19.87 ft Width 2,438 mm / 7.99 ft Height 2,720 mm / 8.92 ft Tare weight 9,260 kg / 20,414 lbs Max weight 10,260 kg / 22,619 lbs Engine type Caterpillar C6.6 Engine output 129 hp / 96.2 kw Ambient temperature -30 C / +50 C Noise level outside 82 db Noise level cabine 72 db Coiled Tubing Reel Length 3,220 mm / 10.56 ft Width 2,000 mm / 6.56 ft Height 2,992 mm / 8.92 ft Tare weight 4,232 kg / 9,329 lbs Max weight 5,127 kg / 11,303 lbs Swivel range 20 Tube diameter 1,25 Tube length 400 m Tube length (useful) 350 m Injector Length Width Height Max weight incl. extra weight Max. pull force Max. speed Grease tank capacity 2,093 mm / 6.86 ft 1,450 mm / 4.75 ft 2,817 mm / 9.24 ft 4,382 kg / 9,660 lbs 5 t 15 m/min 6 l T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone C2-001 Rev.01

Skid-mounted Coiled Tubing Units Offshore Coil Tubing Unit Coiled Tubing Units & Accessories back Profile The modular KOLLER offshore Coil Tubing Unit has been developed as a flexible, fit-for-purpose system that is easily adaptable for various offshore structures i.e. barges, platforms, spars, floaters, and tension-leg platforms. The unit works with tubing sizes ranging from 1 1/4 to 2 3 /8, and can be equipped as well with e-line tubing. It contains four main modules: control cabin hydraulic power pack coil tubing reel transport baskets that contains well-control equipment and the injector head. Modular in design, the hydraulic power pack, the control cabin, and the transport basket are built in DNV certified frames and the control cabin can be placed on top of the hydraulic power pack. This design reduces the total weight and footprint of the entire CT system. modular skid design high reel capacity (6,000 m of 1 1 /4 tubing)* max. pressure of 10,000 psi air conditioning and electric heating in the operator s cabin hydraulic driven control reels ambient temperature -30 C up to +55 C Caterpillar C15 engine, 504 hp / 376 kw* ATEX 201/34/EU Zone 2 3G DNV 2.7-1 carbon steel frames *configurable by customer Well Servicing Products C2-002

Offshore Coil Tubing Unit Power Pack Container Dimensions Length 21.95 ft / 6,690 mm Width 9.84 ft / 3,000 mm Height 9.48 ft / 2,890 mm Weight Tare weigth 41,888 lbs / 19,000 kg Max. weight 48,502 lbs / 22,000 kg Engine Type Caterpillar C15 ATEX Output 504 HP / 376 kw Ambient temperature Min. max. -30 C / -22 F 55 C / 131 F Coil Tubing Reel Skid* Dimensions Length 16.40 ft / 5,000 mm Width 9.84 ft / 3,000 mm Height 13.37 ft / 4,075 mm Weight Tare weigth 27,117 lbs / 12,300 kg Max. weight 97,003 lbs / 44,000 kg Swivel Range 20 *without reel and tube Operator Container Dimensions Length 14.33 ft / 4,370 mm Width 9.84 ft / 3,000 mm Height 9.50 ft / 2,896 mm Weight Tare weigth 16,976 lbs / 7,700 kg Max. weight 22,046 lbs / 10,000 kg Reel Dimensions Outer diameter 12.00 ft / 3,685 mm Core diameter 8,00 ft / 2,440 mm Width 7.05 ft / 2,150 mm Weight Tare weigth 9,259 lbs / 4,200 kg Tube diameter range 1 1 /4-2 3 /8 Auxiliary Equipment Transport Skid Dimensions Length 16.40 ft / 5,000 mm Width 8.20 ft / 2,500 mm Height 13.37 ft / 4,075 mm Weight Tare weigth 4,630 lbs / 2,100 kg Max. weight 44,093 lbs / 20,000 kg Content (configurable by customer) 80k Injector 108 Gooseneck Single/Dual BOP Stripper Lubricator Tooling T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone C2-002 Rev.01

Content Workover & Drilling Equipment Mobile heavy duty Double Workover Rig 90 tons Well Servicing Products

Workover & Drilling Equipment Mobile heavy duty Double Workover Rig 90 tons back SISU heavy duty truck with Caterpillar engine, 10x10 drive for extreme off-road capabilities road approval (Germany, Romania) dimensions and weight within the permitted legal limits for special trucks 6 hydraulical supports, mechanically locked 90 tons hook load drawworks with closed-loop cooling and API 7K monogram sand-line drum for 3000 m working depth (higher depths possible) powerful hydraulic by truck engine via Allison transmission 4700 OFS mast with automatic lock in end position (retracted and extended) and API 4F monogram electric safety according to EN 60204 automatically uplifting working platform while mast telescoping stairs foldable for transport store capacity for 140 double tubings up to 3 1 /2 turning circle under < 20 m working temperature range -29 C / +45 C (+55 C for special operations) Well Servicing Products D-001

Mobile heavy duty Double Workover-Rig 90 tons Spezifications max. hook load 90 tons working depth 3,000 m max. capacity of double tubings 140 x 3 1 /2 working temperature range -29 C / 45 C (55 C for special operations) Engine type of engine output Caterpillar C15 Diesel 550 HP Classifications machine ex-classification mast drawworks corresponds machinery directive 2006/42/EC ATEX 94/9/EC II 2/3 IIA T3 API 4F monogram API 7K monogram Dimensions length width height weight depends on axles (5 or 6) and equipment 18,300 mm 2,550 mm 4,000 mm 50t - 60t Safety controller functions with motor emergency stop according to EN 13849 electronic hook load monitoring (max. 90 tons) monitoring of drawworks cooling and lubrication (ATEX) monitoring of mast locking pneumatic crown block saver dead man switch T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone D-001 Rev.01

Content Test Equipment DPS - Calibration Device WOB Mobile HP Workshop 30k Test Stand for Downhole Motors Pump Test Stand High Temperature Faraday Cage 10 5/8 Wellsite Equipment

Test Equipment DPS - Calibration Device WOB back Profile The DPS (Drilling Performance Sub) calibration device is used to determine measurement data in drilling tools in order to calibrate them using the internal data of the DPS calibration device. Generates up to 5 tons of hydraulic forces for calibrating the drilling tool accordingly. Tools are clamped into the unit with a hydraulic cylinder, and tested. Maximum work piece diameter 3 1 /8. Measures hydraulic forces up to 5 tons Variable measuring force adjustment Protective cover with macrolon safety glass Calibrated measuring box Work piece sizes from 2 3/8 to 3 1 /8 Programmable automatic calibration process control CE per machinery directive 2006/42/EC and lowvoltage directive 2006/95/EC Wellsite Equipment N-001

DPS - Calibration Device WOB Dimensions Length 3,030 mm / 9.94 ft Width 700 mm / 2.30 ft Height 1,600 mm / 5.25 ft Weight 480 kg / 1,058 lbs Tool sizes 2 3 /8, 3, 3 1 /8 Hydraulic specifications Max. hydraulic pressure Delivery rate Measuring forces 180 bar / 2,611 psi 2 l/min 10, 15, 25, 40 and 45 kn Electric control system Programmable logic control (PLC) Main switch Hand switch Press button Emergency stop button for the automatically calibration process for the electric supply for setting the hydraulic forces for start the cylinder drive direction T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone N-001 Rev.01

Test Equipment Mobile HP Workshop 30k back Profile The Koller Pressure Cart is a high pressure test station for sensor technology processed in drilling tool manufacturing. Tests various sensor types. The testing chamber features two permanently attached sensor readers. It also features an area where the sensor reader/sensors are mounted onto modular plates for testing. The maximum approved operating pressure of the pieces to be tested is 30,000 PSI (2,070 bar). A suitable transmitter can record the pressure history. The control elements of the individual hydraulic circuits are visually separated. Each circuit features a needle valve (Block/Supply Return/Bleed) to bleed the circuits for the pressure test. A flow turbine further allows for the air bubble amount inside the test fluid to be checked. The testing pressure is indicated on a calibrated high-pressure manometer. It also features a hydraulics interface for a high-pressure transmitter. Mobile design for flexible high-pressure test station use Very compact size and simple application Independently pressure build-up by manual pump External connection with quick-disconnect couplers for testing large pressure sensors Gauge and optional recorder for reading and recording the test pressure reached. Drip tray for hydraulic fluids drains into the collection box Drawers and spacious shelf space Hydraulic lines and fittings according to pressure directive 97/23/EC Stainless steel spring with copper cable inside for antistatic protection Wellsite Equipment N-002

Mobile HP Workshop 30k Dimensions Length Width Height Weight 1,150 mm / 3.77 ft 600 mm (784) / 1.97 ( 2.57) ft 1,278 (1,502) mm / 4.19 (4.93) ft 250 kg / 551 lbs Operating conditions Range of working temperature 0-65 C Antistatic hydraulic system Max. working pressure Hydraulic circuits Pipe & fitting system HP-pump Valves Flow turbine 2,070 bar / 30,000 psi 4 pcs. Autoclave high pressure system High pressure hand pump Needle valves for a exactly control to control the air bubbles 1 HP test connection for high pressure transmitter & chart recorder 1 HP gauge to check the test pressure Working fluid Hydraulic oil Enerpac HF-95X/Y/Z Supply water / Drinking water Transaqua HT / HT2 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone N-002 Rev.01

Test Equipment Test Stand for Downhole Motors back Profile The test stand is used to hold and tighten a size of 3-9 downhole motors to test them for maximum permissible torque. A hydraulic cylinder clamps the downhole motors. The movement is actualized by a hydraulic motor with chain drive. The torque to be applied (depending on the motor size) is generated by an eddycurrent brake or disc brake. Machine bed Hydro vices with built-in hydraulic power unit Water hood Eddy-current brake/disc brake The operating and control elements are located on a separate, stand-alone control console. Closed hydrovices control via remote control Options Pump and tube system for downhole motor drive mediums according to DGRL 97/23/EG Wellsite Equipment N-003

Test Stand for Downhole Motors Dimensions Length 9,120 mm / 29.92 ft Width 1,200 mm / 3.94 ft Height 1,800 mm / 5.91 ft Safety class IP 54 Ambient temperature +5 C / +40 C Test engine sizes Design size 3-9 Torque limits Max. torque 31,000 Nm T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone N-003 Rev.01

Test Equipment Pump Test Stand High Temperature back Profile The pump test stand is used to test submersible pumps under load whilst applying pressure and temperature. This is done in line with final pump inspection to simulate the actual operating conditions. Approvals Pressure equipment directive 97/23/EC Low voltage directive 2006/95/EC Machinery directive 2006/42/EC Workshop: Assembly area for equipping the reference tube Container I III 40ft: Reference tube with circulation line Container IV 40ft: Reservoir, equalizing tank, control and regulating valves, pump units and tube bundle heat exchanger Container V 20ft: heating- and cooling unit Programmable logic controller (PLC) with safety control (SRECS) Electro-hydraulic loading system for pumps The monitoring and control elements as well as the monitoring screens are located in a specially isolated control room. Wellsite Equipment N-004

Pump Test Stand High Temperature Dimensions Length Width Height (including open-air cooler) System housing 40,000 mm / 131.23 ft 4,900 mm / 16.08 ft 4,500 mm / 14.76 ft The system components are in the four containers (40 feet)housed Safety class IP 65 Ambient temperature +4 C / +50 C Test chamber Diameter 397 mm / 1.3 ft Usable length 33,000 mm / 108.27 ft Test medium water Max. operating pressure 100 bar / 200 bar Max medium temperature 190 C Limits Maximum operating pressure (form) 200 bar before the adjustment valve Maximum operating pressure 100 bar (Reprint) by the adjustment valve Max. operating temperature 190 C Max. flow rate 9,000 l/min Containers Volume storage tank Volume expansion tank 15,500 l 330 l Pipeline PN16 Ø 48,3 x 3,2 mm PN100 Ø 219,1 x 17,5 mm PN200 Ø 168,3 x 20,0 Ø 219,1 x 25,0 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone N-004 Rev.01

Test Equipment Faraday Cage 10 5/8 back Profile The Faraday cage is intended to screen the internal HF-field and extrinsic radio frequencies. It consists of two thin-walled drum halves connected at the top by two guide bars. An attachment point for fixing a lifting eye is located at the top for hoisting/lowering. The Faraday drum halves can be opened and closed using handles at the side and on the face. The top guide ensures the drum halves are opened evenly. Attachment points / rubber buffers limit the opening width of the drum halves. The cage features a base frame with individually adjustable leg supports. To adjust, loosen the clamping knob and adjust the leg supports to the respective height. Precision guiding system Aluminium cage halves, welded and riveted Transportable via crane or forklift Feet with variable height adjustment Guide pins and fastening tensioners ensure accurately seated cage halves Handles for shifting the Faraday cage halves Lever with locking plate for locking and unlocking the lift attachment bolt Hand lever for variable support leg clamping Approvals Machinery directive 2006/42/EC (CE marking) Wellsite Equipment N-005

Faraday Cage 10 5/8 Dimensions Depth, closed Depth, open Width Height Gross weight Aperture dimensions Ambient temperature 2,016 mm / 6.61 ft 2,732 mm / 8.96 ft 1,400 mm / 4.59 ft 2,095 mm / 6.76 ft 240 kg 714 mm / 2.34 ft +4 C / +40 C Tool dimensions 5 ¼, 7 ¼, 8 7 /8, 10 5 /8 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone N-005 Rev.01

Content Hydraulic Power Units BOP Control Unit Hydraulic Power Unit 3k 150L Wellhead Control Panel 10K Hydraulic Power Unit - Power Tong Hydraulic Power Unit - Rotary Table Wellsite Equipment

Hydraulic Power Units BOP Control Unit back BOP Control Unit with remote control Profile The KOLLER BOP Control Unit is a complete electrohydraulic system designed for the control and the operation of a BOP stack in the hazard area. One (1) Annular BOP 7 1 /16 x 3.000 psi One (1) Pipe Ram BOP 7 1 /16 x 3.000 psi One (1) Blind Ram BOP 7 1 /16 x 3.000 psi The design and calculation for: Accumulator Volumetric Capacity Pump Rating Reservoir Volume The BOP Control Unit is in accordance with API Specification 16D. CE conform according machinery directive 2006/42/EG One (1) 480 liter fluid reservoir Five (5) 50 liter hydropneumatic accumulators acc. PED Two (2) electric motor driven pumps with automatic pressure switch for start / stop One (1) air operated double acting piston pump with automatic air pressure switch for start / stop Wellsite Equipment P-001

BOP Control Unit Specifications Form factor Range of ambient temperature ATEX identification CE conform according Hydraulic System Maximum working pressure Pump flow rate Close capacity for BOP s Fluid reservoir Pressure regulator Control Panels Pressure gauges Signal / Control lamps Hand operated pneumatic valve Remote control panel Dimensions Length Width Height Gross weight 10 ft steel frame -20 / +40 C EX II 2G II B T3 machinery directive 2006/42/ EG 207 bar / 3,000 psi 20 liter/min 5.3 gallon/min 38,8 liter/min 10.25 gallon/ min 480 liter One for Annular Pressure One for BOP Manifold Pressure 6 piece with OD 100 mm 6 piece for alarm / signal for regulation of the annular working pressure fully-electric operation of all three functions 2,990 mm / 9.80 ft 2,448 mm / 8.03 ft 2,863 mm / 9.39 ft 4,000 kg / 8,818 lbs Hydraulic storages and hoses Operator panel Remote control covered for transport BOP connectors T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone P-001 Rev.01

Hydraulic Power Units Hydraulic Power Unit 3K 150L back Profile The Koller Hydraulic power Unit 3k150L is a complete electro- hydraulic system to supply a power-swivel and a power-tong with hydraulic pressure. The operator controls the HPU with the control panel into the container or by remote control from the rig floor. Hydraulic control panel Electric control panel Remote control with 30 m cable Emergency remote control with 30 m cable Two internal hydraulic hose reels Connection area for hydraulic supply / return and electric supply 4-cylinder Diesel power pack Water and hydraulic oil coolers Hydraulic pumps 4-cylinder diesel engine Wellsite Equipment P-002

Hydraulic Power Unit 3K 150L Specifications Form factor 10 ft steel container Range of ambient temperature -20 / +40 C CE conform according machinery directive 2006/42/EG, low voltage directive 2006/42/EG Hydraulic System Maximum working pressure Pump flow rate Fluid reservoir Functions Control Panels Pressure gauges Pressure regulator with engraved flow diagramm Remote control Dimensions Length Width Height Gross weight 210 bar / 3,045 psi 150 liter/min / 39.6 gallon/min 300 liter one for power swivel one for power tong 2 pieces with OD 60 mm 2 pieces, 1 per function wired, with 30 m cable 2,990 mm / 9.80 ft 2,450 mm / 8.03 ft 2,581 mm / 8.47 ft 6,500 kg / 14,330 lbs Electric control panel Hydraulic control panel Electric Control Panel Emergency stop Disturbance display Turn-switch for control panel or remote control Turn-switch for tong operation ON / OFF Turn-switch for electric lighting Three control lamps for motor information Control lamp for electric supply Fuel gauge Information display with start-switch for motor Electric Power Sources Supply Frequency 230V AC / 16 A 50 Hz Remote control Container closed Connection area T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone P-002 Rev.01

Hydraulic Power Units Wellhead Control Panel 10K back Profile These type of wellhead control panel have electrically driven hydraulic pumps to generate hydraulic power source for wellhead valves operational requirements. Hydraulic logic header pressure is derived from the main hydraulic header by using hydraulic regulators and the required control & shutdown logics are developed. The panels can be controlled either locally or remotely. Wellhead control panels are provided with level gauge, level transmitter for oil storage tank, pressure transmitters for hydraulic main header, fusible loop header and wellhead valves control line pressure header. Direct acting high pressure solenoid valves (EEx d) are provided to control the wellhead valve open/close operations. Electrical control panel is provided with start/stop push buttons, ESD push button, indication lamps and selector switches for local & remote controls. Closed stainless steel cabinet with seven doors for protection (IP 65) and maintenance Four lifting points and two forklift pockets for transport Outside installed accumulator bank Stainless steel fluid reservoir with level control Two hydraulic piston pumps for normal operation One hydraulic hand pump for emergency One hydraulic pressure filter with gauge for dust indication Two hydraulic control areas Approvals ATEX 94/9/EC Ex II 3G IIB T3 Low voltage directive 2006/95/EC Machinery directive 2006/42/EC Wellsite Equipment P-003

Wellhead Control Panel 10K Controlled Functions Once Master Valve (MV) Once Wing Valve (WV) Once Surface controlled Subsurfave Safety Valve (SCSSV) Twice High Integrity Pressure System (HIPPS) Dimensions Length Width Height Gross weight 2,825 mm 1,185 mm 2,210 mm 2,150 kg Operating Elements Hydraulic and electric control panes, on per function Pressure regulators Different valves, turn-switches and information lamps per function Power Sources available Electrical supply Electrical control voltage Ambient Conditions once 400 V, 50 Hz once 24 V DC for the internal junction boxes Ambient temprature -20 / +40 C Relative humidity 65 % Hydraulic System Two electic piston pumps Hydraulic tube system Fuction lines Working fluid Electric System Once junction box Ex e Once junction box Ex e (i) 2.7 l/min, MWP 700 bar HP Autoclave, LP Swagelok double ferrule 5 times supply (MV,WV,SCSSV,HIPPS twice) Twice return (HIPPS 1+2) Shell Tellus 22 / Transaqua HT for supply voltage and motor control and customer connections for supply voltage and circuits control and customer connections T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone P-003 Rev.01

Hydraulic Power Units Hydraulic Power Unit - Power Tong back Profile The Koller Hydraulic Power Unit - Power Tong is a location-independent unit which is used for supplying hydraulically-operated tongs for connecting and releasing drill pipes. auxiliary electric heater for hydraulic oil two internal hydraulic hose reels hydraulic oil coolers hydraulic control panel three-stage adjustment of the hydraulic volume flow Two internal hydraulic hose reels Wellsite Equipment P-004

Hydraulic Power Unit - Power Tong Dimensions Length Width Height Net weight 3,300 mm / 10.83 ft 1,980 mm / 6.5 ft 1,747 mm / 5.73 ft 3,200 kg / 7,055 lbs Hydraulic performance data Max. volumetric flow Max. hydraulic pressure Hydraulic tank capacity Length of connecting lines Connections 192 l/min (speed dependent-refer table below) 170 bar 300 l 20 m quick coupling 1 + 1 1 /4 Female Diesel engine speed rpm Volumetric flow (l/min) Pump 2 Pump 1 Pump 1+2 1800 73 118 192 1700 69 111 181 1600 65 105 170 1500 61 98 160 1400 57 92 149 1300 53 85 138 Engine Type Caterpillar C4.4 Fuel Tank capacity Rated power Nominal speed Max. permissible speed Diesel 150 l 70 bkw 1,600 rpm 1,800 rpm Fulfills CO 2 standard U.S. EPA Tier 3, EU Stage IIIA Noise level Ambient temperature 85 db(a) -20 C to +40 C T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone P-004 Rev.01

Hydraulic Power Units Hydraulic Power Unit - Rotary Table back Profile The Koller Hydraulic Power Unit - Rotary Table is a location-independent unit which is used to operate rotary tables that drive drill pipes. The direction of rotation, target speed and target torque of the rotary table are preselected via the remote operating panel. This remote operating panel has two 30-m-long connecting cables and is approved for use in ATEX Zone 1. auxiliary electric heater for hydraulic oil three internal hydraulic hose reels hydraulic oil coolers hydraulic control panel remote control with 30 meter cable Wellsite Equipment P-005

Hydraulic Power Unit - Rotary Table Dimensions Length Width Height Net weight Hydraulic performance data Max. volumetric flow Max. hydraulic pressure Hydraulic tank capacity Length of connecting lines 4,000 mm / 13.12 ft 1,980 mm / 6.5 ft 1,747 mm / 5.73 ft 4,350 kg / 9,590 lbs 220 l/min 200 bar 300 l 25 m Connections quick coupling Return: 3 /4 Male Connection B: 1 1 /4 Female Connection A: 1 1 /4 Male Engine Drive Type Caterpillar C6.6 Fuel Tank capacity Rated power Nominal speed Operating speed Diesel 300 l 129 bkw 2,200 rpm 1,600 rpm Fulfills CO 2 standard U. S. EPA Tier 3, EU Stage IIIA Noise level Ambient temperature 85 db(a) -20 C to +40 C T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone P-005 Rev.01

Content Workshop Equipment Washing Plant Power Torque Workbench 1700/2000 Hydraulic Vice 220 kn Wellsite Equipment

Workshop Equipment Washing Plant back Profile The KOLLER Washing Plant L700 is used for cleaning component parts up to a maximum weight of 250 kg / 551 lbs. The washing case is filled with 170 l cleaning fluid, which can be heated up to 65 C. You are able to clean the component parts with a special oscillation program or by hand with a separate cleaning brush. For the cleaning brush program the case will be lifted to working height. The KOLLER Washing Plant L700 is especially designed to fit into the KOLLER Green Line. Due to the cleaning fluid is continuously circulated through a flushing pump, then filtered and at the end oxygenated with a separate oxygen pump. Therefore the cleaning fluid can be used multiple times. Runs with two different programs: Automatic (oscillation) with washing-table drive up and down Hand-drive (cleaning brush) Available in two versions L700 for component parts up to 150 kg / 331 lbs L900 for component parts up to 250 kg / 551 lbs Two control panels for electric and pneumatics Economically and maintenance-friendly Construction and assembling according to machinery directive 2006/42/EC Electrical installations according to low voltage directive 2006/95/EC Wellsite Equipment R-001

Washing Plant Dimensions Total length Width Height Gross weight 1,425 mm / 4.68 ft 891 mm / 2.92 ft 880 mm / 2.89 ft 320 kg / 705.5 lbs Specifications Electric supply Pneumatic supply Case Volume Load capacity Washing Plant L700 Washing Plant L900 400V, 16A, 50Hz Max. 13 bar / 189 psi 700 / 900 l 150 kg / 331 lbs 250 kg / 551 lbs Heating max. 65 C Timer for start/stop the heater Temperature Control by thermostat, 30 85 C safety temperature set for 70 C Circulating pump approx. 12 m³/h (200 l/min) Double pressure filter system with 3-way ball valve stainless steel, 500 μ, cleanable one filter each for the working process and substitute T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone R-001 Rev.01

Workshop Equipment Power Torque back Profile The KOLLER Power Torque was designed for the fast and precise making or breaking of threaded connections on completion strings. The base frame supports a turnable chuck that contains one of two vises that can be rotated by hydraulic cylinders. The second stationary vise can be moved horizontally on rollers and driven by a hydraulic motor. Rocking movements during the fitting of connections are avoided by the adjustable guides. Each vise is equipped with it s own hydraulic power unit for the hydraulic supply. The Power Torque is controlled from a operation panel outside the hazard area. It is equipped with all necessary buttons/switches, a touch screen for setting the parameters of the hydraulic pressures and torques and a joystick for moving the sliding chuck. Including separate hydraulic power unit with 15 kw / 20.4 HP and a working pressure of 350 bar / 5,075 psi Pipe diameter up to 14 Operation Panel with touch screen, which shows exactly the target and performance Ethernet connection to run external comparisons CE mark according machinery directive 2006/42/EC Extendable with a pull/push mounting cylinder and a moveable support jack Quick-action coupling system for the easy mounting or dismounting Wellsite Equipment R-002

Power Torque Dimensions Total length Width Height Gross weight 7,000 mm / 22.97 ft 1,540 mm / 5.05 ft 1,930 mm / 6.33 ft 7,983 kg / 17,600 lbs Specifications Torque, max (make) Torque, max (breake) Hydraulic pressure Clamping force, F max Hydraulic pressure Tool diameter min. / max. 251 knm 367 knm 250 bar 594 kn 295 bar / 4,279 psi 144 mm / 441 mm Environmental influences Ambient temperature -20 C - +50 C Air humidity, max. 96 % Hydraulic system Motor output Rated rpm Operating pressure (low) Operating pressure (high) Return pressure, approx. Pump delivery 15 kw / 20.4 HP 1,450 rpm 5 bar / 73 psi 315 bar / 4569 psi 5 bar / 73 psi 110 l/min Electric connection Voltage Frequency Amperage 400 V AC 50 Hz 16 A T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone R-002 Rev.01

Workshop Equipment Workbenches 1700 / 2000 back Workbench 2000 with Equipment Profile The KOLLER Workbenches are assembly and disassembly benches for screwing or loosening threaded connections of down hole tools. The maximum diameter of the parts to screw is 5 3 /8 (137 mm). The extremly robust design of the workbenches allows to work with torques up to 20,000 Nm (type 2000). The tools can be moved in the dovetail guide over the entire length of the bench and rotated by 180. This feature allows handling from both sides of the benches. Pneumatic-driven hydraulic power pack with maintenance unit Working pressure stepless adjustable and visible on a gauge Vertical and lateral adjustable vee Removable drip trays for liquids with drain valve Well dimensioned trays for tools and small parts Feet with bore holes for floor mounting Optional base plate when floor mounting is impossible Workbench 1700 Workbench 2000 General Specifications Max. torque 6.000 Nm 20.000 Nm Working width 1,700 mm / 66.93 in 2,000 mm / 78.74 in Dimensions L / W / H 1,700 / 725 / 831 mm 66.93 / 28.54 / 32.72 in 2,000 / 725 / 861 mm 78.74 / 28.54 / 32.72 in Weight 280 kg / 617 lbs 400 kg / 882 lbs Hydraulic Group Drive pneumatic by pressure air Air pressure 2,8-8,3 bar / 40-120 psi Max. hydraulic pressure 350 bar / 5,075 psi 220 bar / 3,191 psi Max. working pressure 200 bar / 2,900 psi 210 bar / 3,046 psi Wellsite Equipment R-003

Workbenches 1700 / 2000 Friction vise and tong wrench Hydraulic power pack with maintenance unit Equipment for Workbenches Order- No. Type Description 008660 Equipment Set 1 Surgrip friction vise ZV35-54 for vise bushing halfshells 1 1 /16 to 3 1 /4 008269 Equipment Set 2 Surgrip friction vise ZV35-54 for vise bushing halfshells 3 to 5 1 /4, with adapter bushing 35-55 for 1 1 /16 to 3 1 /4 008270 Equipment Set 3 Vise bushing halfshells 1 3 /4 and 2 3 /8, with friction tong type ZT3 for 2 3 /8 012596 Equipment Set 4 Vise bushing halfshells 1 3 /4 and 3, with friction tong type ZT5 for 3 008271 Equipment Set 5 Vise bushing halfshells 64 mm, with friction tong type ZT4 for 64 mm 008273 Equipment Set 6 Vise bushing halfshells 70 mm, with friction tong type ZT4 for 70 mm 008274 Equipment Set 7 Vise bushing halfshells 1 3 /4, 3 1 /8 and 3, with friction tongs type ZT5 for 3 1 /8 and 3 008298 Equipment Set 8 Surgrip friction vise ZV55-54 for vise bushing halfshells 5 15 /64 and 5 1 /4 008272 Base plate 50 mm thick steel plate to stabelise the workbench without floor mounting (430 kg 930 lbs) 008278 Torque wrench Surgrip torque wrench ZT3T for 2 3 /8 008279 Torque wrench Surgrip torque wrench ZT4T for 3 020258 Torque wrench Gearench surgrip torque wrench ZT4T:2.520 015791 Torque wrench Gearench surgrip torque wrench ZT4T:2.750 010925 Hydraulic unit ENERPAC hydraulic unit 008317 Conversion kit for changing hydraulic unit from ENERPAC to LUCAS 010931 Conversion kit Gearench surgrip friction vise ZV35 008324 Conversion kit Gearench surgrip friction vise ZV55 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone R-003 Rev.01

Workshop Equipment Hydraulic Vice 220 kn back Profile The Hydraulic Bench Vice is designed for hydropneumatic clamping of pipes and tubular workpieces. Environmental Conditions Ambient temperature: +5 C / +40 C Power Sources Available Air supply: 283-991 l/min Pneumatic pressure regulator for pump air supply Hydraulic pressure regulator for working pressure Enerpac air driven pump with foot peddles For additional information please refer to our respective Workshop Equipment catalogue. Approvals Machinery directive 2006/42/EC (CE marking) Wellsite Equipment R-004

Hydraulic Vice 220 kn Dimensions Depth, closed 1,150 mm / 3.77 ft Depth, open 1,800 mm / 5.91 ft Width 680 mm / 2.23 ft Height 1,900 mm / 6.23 ft Gross weight 730 kg Tool dimensions 3 9 Hydraulic system Air hydraulic pump 0.25 l/min, MWP 700 bar / 10,150 psi, with integrated 3/3 way function valve Function lines Hydraulic hoses for supply and return line Hydraulic cylinder for the prism (V-block) / clamping function T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone R-004 Rev.01

Content Special Equipment Batch Mixer Mud Solid Control Unit Coiled Tubing Tower Core Saw Wellsite Equipment

Special Equipment Batch Mixer back Profile The KOLLER Batch Mixer is used to manufacture cement mixes in ready-to-use batches. The batch tank required for this is subdivided into two chambers, one with a capacity of 20 m³, and one with a capacity of 10 m³. If bagged goods are being used, the media are fed in via a hopper attached to the batch tank in the circulation line; if loose bulk material is being used, the media are fed in via bulk connections or tank truck connections on the batch tank. Integrated power generator no need for an external power supply Three agitators Discharge in the tank floor easy to clean manually Four lights Centrifugal pump for circulation and conveyance with suitable pipelines Forklift pockets and eye bolts Twist lock mechanism Wellsite Equipment S-001

Batch Mixer Dimensions Total length Width transport Width operation Height transport Height operation Empty weight 12,759 mm / 41.8 ft 2,540 mm / 8.33 ft 3,095 mm / 10.15 ft approx. 3,950 mm / 12.96 ft approx. 4,155 / 13.63 ft 11,692 kg / 25,776 lbs Electrical connection power Mixer 1-3 Centrifugal pump Tank volumes Batch tank Chamber 1 Chamber 2 Connections Bulk line Water line Water line for hopper Water line for tank 20 m³ Emptying of chambers Removal of samples Hopper bulk line Tank truck connection 3 x 22 kw 30 kw 20 m³ / 706 ft³ 10 m³ / 353 ft³ 2 x 4 in 1 in 2 in 2 in 2 x 4 in 2 x 2 in 6 in 2 x 3 in Max. operating pressure of the pipelines 5 bar Range of ambient +5 / +40 C T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone S-001 Rev.01

Special Equipment Mud Solid Control Unit back Profile The Mud Solid Control Unit is mainly used in the active flushing system for weighted flushes. This is known as the dual-stage principle. It is based on the principle that two centrifuges are switched after each other. The first centrifuge is loaded with a partial flow of the circulation flushing. The separated solids, essentially weighted matter, is fed back to the flushing system. The remaining centrate (liquid phase) is not rejected but fed to the second centrifuge. Normally, the first centrifuge is run more slowly (low-speed) than the second (high speed). The harmful drilled solids and the just as harmful barite crushed to fine grain are now segregated and rejected (in cutting box) in the second centrifuge. On the other side, the liquid centrate containing the dissolved chemicals and largely freed from the fine solids is fed to the flushing system. However, a good cut point - particularly in the second centrifuge - can generally only be achieved by flocculation of the hydratable solids. Therefore, barite recovery takes place in the first (low-speed) centrifuge and discharge of the fine solids in the second (high-speed) centrifuge. 20 ft Poly Dissolution Container Flocculation station, SST 304 stainless steel - Vessel / tank 3,000 L, three different chambers (one for preparation, one for maturation & one as stock chamber - Meetering, hopper 100 L with inspection glass, material SST 304, variable speed delivery chute, adjustable speed motor, ATEX proved - Mixers, three electric agitators, 0.37 kw ATEX proved, reduction gear, SST shaft with mixing-screw - Operation Panel, ATEX proved Barite tank and ATEX pumps Metering ATEX pump, BTE 10-20, 5 m³/h Centrifuges ATEX feed pumps with gearbox, 5,7 22,7 m³ ATEX Electric Control System 20 ft Centrifuge Container Two Brand HS 3400 VSD centrifuges, bowl dimension 350 mm diameter x 1260 mm, speed 1500 4000 rpm Option: centrifuges high-frequency electric driven ATEX electric boxes for centrifuges Approvals by TÜV Nord Systems ATEX Ex II 3G IIB T3 Elektrobergverordnung ElBergV- Tiefbohrverodnung BVOT DIN VDE 0100, DIN VDE 0165, BGV A3 Wellsite Equipment S-002

Mud Solid Control Unit Dimensions Length Width Height Weight Container 1 Weight Container 2 6,096 mm / 20 ft 2,438 mm / 8.0 ft 2,591 mm / 8.5 ft 3,000 kg / 6,614 lbs 10,500 kg / 23,149 lbs Ambient and Ex-Protection ATEX specification Range of ambient Ex II 3G IIB T3-20 / +40 C Electric parameters Connected load Centrifuge Flocculation station Voltage / Frequency 2 x 38 kw 2 x 125 A 1 x 20 kw 1 x 63 A 400 V (AC) / 50 Hz Connections Tank system - mono pump I+II 2 coupler FE Tank system - mono pump III (barite) 2 coupler FE Centrifuges - mud tank 6 KG pipe Fresh water 1 T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone S-002 Rev.01

Special Equipment Coiled Tubing Tower back Profile The Coiled Tubing Tower is designed for inserting a tube, rolled up on the ground as a coil, which is guided by the injector or by tools fitted at the front end of the tube into the bore hole. The tower consists of the base frame, onto which various intermediate segments are fitted in order to achieve variable heights, and the lift frame for holding the injector. The intermediate segments fitted on top of the base frame can be laterally displaced for changing the tools. Components Base frame - The outside support feet are hydraulically height adjustable and the inside support feet are height adjustable via trapezoidal spindles. Base segment Intermediate segment, 3,000 mm height Intermediate segment, 2,500 mm height Intermediate segment, 2,000 mm height Intermediate segment, 1,500 mm height Lift frame for injector, height adjustable up to 700 mm Operating elements Hydraulic control panel base frame The individual adjustment of the four lift cylinders and the joint actuation of the two horizontal displacement cylinders are performed from the control panel. Hydraulic control panel lift frame The joint/synchronous actuation of the four lift cylinders is performed from the control panel. Approvals ATEX 94/9/EC Ex II 2G c IIB T3 Elektrobergverordnung ElBergV- Tiefbohrverordnung BVOT Machinery directive 2006/42/EC Wellsite Equipment S-003

Coiled Tubing Tower Weights Base frame Base segment Lift frame Dimensions (L x W x H) Base frame Base segment Lift frame 9,138 x 2,520 x 3,200 mm 29.98 x 8.27 x 10.50 ft 2,500 x 2,500 x 2,430 mm 8.20 x 8.20 x 7.97 ft 3,957 x 2,550 x 2,455 mm 12.98 x 8.37 x 8.05 ft Support feed (base frame) Hydraulically and manually height adjustable Infinitely variable lift adjustment Lift adjustment in 3 detent positions Total stroke 12,600 kg / 27,778 lbs 1,450 kg / 3,197 lbs 4,150 kg / 9.149 lbs 200 mm 450 mm Hydraulic operation data (external unit) Operation pressure Volume flow rate Hydraulic line connection Supply line pressure Supply line diameter Return line pressure Return line diameter 2 in min. 117 / max. 172 bar min. 12 l/min 190 bar 3/8 20 bar 1/2 2 hydraulic cylinders, lateral displacement Diameter piston / piston rod 100 / 70 mm Stroke 2,500 mm Max pushing speed 5 mm / sec Function mechanically coupled 4 hydraulic cylinders, base frame support feed Diameter piston / piston rod 80 / 50 mm Stroke 200 mm Max pushing speed 5 mm / sec Function individual selectable 4 hydraulic cylinders, lift frame rising Diameter piston / piston rod 80 / 56 mm Stroke 700 mm Max pushing speed 5 mm / sec Function synchronized Injector (not by KOLLER) Max. pull force 360 kn Max diagonal pull on pipe 6.3 kn 3 detent positions 450 mm Weight approx. 12,000 kg Anchoring, basis structure Weight anchorage foundation 5,000 kg Prestressing force 5 kn Anchoring, complete unit Weight anchorage foundation 7,500 kg Prestressing force 10 kn Atex identification Ex II 2G c IIB T3 Range of ambient -20 / +40 C Injector platform with centering bolts Control panel on base frame T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone S-003 Rev.01

Special Equipment Core Saw back Profile The Koller Core Saw is used to cut the inner tube with drill core into 900 1,000 mm sections. The conical drums of the connected lay down frame feeds the inner tube to the saw, where an air-powered diamond or corundum saw blade cuts it into the sections described above. The inner tubes can be made of aluminum alloy, fibreglass or heat-treatable steel. In most cases, aluminum tubes are used, so the equipment is optimised to effectively cut filled-core aluminium tubes. The core saw is suitable for offshore and onshore applications. Built-in dust extraction 2-hand safety control 4-point height adjustment operated by socket key (alignment toward lay-down frame) Self-opening, enclosed blade guard Roller guided workpiece rack Semi-automatic, wax-powder lubrication DNV 2.7-1 frame and lifting gear CE compliant design Good access to controls Clear and simple control Long maintenance intervals Space-saving internal constructions High corrosion resistance Up to 5 miter cuts Spare blade holder Colour-coded blade cover (fluorescent orange) Wellsite Equipment S-004

Core Saw Dimensions Height Width Width expanded Depth Weight 1,988 mm / 6.52 ft 1,578 mm / 5.17 ft 3,134 mm / 10.28 ft 1,860 mm / 6.10 ft 1,270 kg / 2,799 lbs Technical Data Engine Power Ambient Temperature 14.75 hp / 11 kw - 20 C / +40 C Miter angle 0-5 Air consumption Saw blade diameter Circumferential speed Air supply Coupling disc 2x Internal thread 1 x 2 Inner Tube with core Compressed air system 370 l/s 600 mm 50 m/s Outside diameter max. 176 mm / 0.58 ft Outside diameter min. 60 mm / 0.2 ft Length max. (extension possible) 10,668 mm / 35 ft Stop position for cutting length 3 ft and 1,000 mm Weight max. 990 kg / 2,182 lbs Inner tube material Steel, aluminium, GFK, plastics Operating pressure Supply pressure 6 bar max. 10 bar T: +49 5141 9898-0 F: +49 5141 9898-98 Bruchkampweg 5 29227 Celle/Germany info@koller-celle.de www.koller-celle.com scan with your smartphone S-004 Rev.01

Bruchkampweg 5, 29227 Celle/Germany +49 5141 9898-0 +49 5141 9898-98 info@koller-celle.de www.koller-celle.com