PARALLEL PROCESSING UPS E33A

PARALLEL PROCESSING UPS E33A

Low energy, high quality, high reliability parallel processing type UPS E33A Supporting network PARALLEL PROCESSING UPS Parallel operation backup time Input AC380, 400, 415, 420V Output AC380, 400, 415, 420V 100kVA (90kW) Output capacity 200kVA (180kW) 300kVA (270kW) 5 min Standard 8 min min Standard Parallel redundant operation Internal Input AC380, 400, 415, 420V Output AC380, 400, 415, 420V Output capacity 100kVA 200kVA (90kW) (180kW) min min min min Extended battery 1 High efficiency Achieves 98 % efficiency. Running costs can be drastically reduced. Contribute on protecting the environment. Power consumption comparison for one year (kwh) 2,000,000 Double conversion UPS 1,768,926kWh 1,621,945kWh Difference in yearly consumption 146,981kWh Conversion efficiency 98% 1,500,000 1,000,000 500,000 0 *When is supplied based on rated. *Includes consumption of facility equipment and air conditioning system used for UPS cooling. Facility equipment Data center equipment Factory equipment Power plant, etc. 2 High quality No interruption of output Supplies in sine wave and completely without interruption of output even when there is a outage, such as black out instantaneous break or voltage dip. When a surge generates by injection of a static capacitor, etc., the feeding is switched to temporally mode which supplies from the inverter. This supply is not from battery, so stress is not placed on the battery. Waveform during outage Waveform during surge addition Operational status Normal and inverter parallel operation Power outage Inverter supply (battery supply) Operational status Normal and inverter parallel operation During surge addition Inverter supply (capacitor supply) Normal and inverter parallel operation Input voltage Output voltage Completely without interruption of output. Input voltage Output voltage Removes surge and noise. 2

Active filter function A bi-directional inverter makes the UPS input current into a sine wave. It removes harmonic current from commercial supply and other equipment. At the same time, factor is improved and becomes approximately 1.0. UPS AC switch Cancel harmonic Input current The commercial side is a sine wave with no harmonic components Bi-directional inverter Compensation current Reverse current for harmonic current Output current Currents that include harmonics generated from equipment and devices Facility equipment Data center equipment Factory equipment Power plant, etc. 3 High reliability Parallel redundant operation E33A is the industry's first parallel processing UPS, that can perform parallel redundant operation. In addition, it is a completely individual control system by setting control units to each UPS for parallel operation. The parallel redundant operation with the independent control units makes it highly reliable. During parallel redundant operation When it is common control system When it is completely individual control system Control unit UPS No.1 UPS No.1 Control unit UPS No.2 UPS No.2 Control unit UPS No.3 Facility equipment Data center equipment Factory equipment Power plant, etc. UPS No.3 Control unit Facility equipment Data center equipment Factory equipment Power plant, etc. Automatic battery operation test The UPS runs periodic battery operation tests on its own to maintain the battery in a reliable operating condition in the event of an actual outage. During testing, is supplied from the commercial supply ensuring that supply can be maintained even if the battery is worn out. Start of operation check Normal operation supply check Filter AC switch Device Periodic check Filter AC switch Device Inverter Inverter 4 The battery test is performed while is supplied from the commercial supply. When the battery is worn out, a battery replacement alarm sounds. The automatic battery operation test cycle can be changed. Designed for factory equipment Designed with a high overload capacity of 800% (0.5 seconds) and can withstand rush currents of transformer, etc. 3

Expanding the capacity with unit extensions The capacity can be expanded by adding a 100kVA unit when required. Up to 300kVA of expansion is possible. *Consider the I/O cabinet that match the maximum capacity of the expected UPS, from the beginning of the installation. I/O cabinet I/O cabinet Parallel operation Output capacity 100kVA 200kVA 300kVA Parallel redundant operation Output capacity (N+1 units) ー 100kVA 200kVA Parallel processing type The conventional On-line UPS is a double conversion UPS, however this product, SANUPS E33A, using parallel processing type always operates a utility source and the inverter in parallel redundant at normal mode. It supplies superior quality to information communications devices and so on. Since this operation, feeding of SANUPS E33A is highly efficient and reliable. Specifications Item Model E33A104 E33A204 E33A304 E33AR104 E33AR204 Remarks System Parallel operation Parallel redundant operation Rated output capacity Apparent 100 kva 200 kva 300 kva 100 kva 200 kva Effective 90 kw 180 kw 270 kw 90 kw 180 kw Operation system Parallel processing type Number of phases / wires Rated voltage 415 V (380, 400, 420 V) Rate frequency 50 / 60Hz AC Required capacity 120 kva 240 kva 360 kva 120 kva 240 kva input Distorted Compensation capacity Within rated capacity current Compensation order 2 to 20 order harmonic compensation Compensation rate 75% In case of 3 phase 3 wires Input factor 0.97 or higher At rated operations Number of phases / wires Same as AC input Rated voltage 415 V (380, 400, 420 V) Same as AC input At commercial parallel Voltage precision operation Within +10% and -8% At battery operation Within 2% Rate frequency 50 / 60 Hz Same as AC input At commercial parallel Rated Within 5% operation frequency precision At battery operation Within 0.5% AC output Rating 0.9 (lagging) Load factor Variation range 1.0 to 0.7 (lagging) Voltage wave form At linear load 2% or less distortion factor At rectifier load 5% or less At battery operation Instantaneous voltage variation Variation rate Within 5% At battery operation At commercial parallel Overload capacity operation 200% (30 seconds), 800% (0.5 seconds) At battery operation 150% (1 minute), 125% (10 minutes) ing to battery operation Without momentary break Efficiency Single characteristics, load 98% or higher (commercial parallel operation) factor 1.0 Acoustic noise 70 db 73 db 76 db 73 db 76 db 1 m from front, height 1 m Installation Indoor Environment Ambient temperature 0 C to 40 C Relative humidity 20% to 90% (no condensation) Altitude 1000 m or below * Contact us about the changes on voltage precision and frequency precision. Options Networks LAN interface card *A card that connects to LAN (100Base-T). UPS management software (SANUPS SOFTWARE) 4

Heating value and cooling flow rate Items E33A104 E33A204 E33A304 E33AR104 E33AR204 Input capacity 120kVA 240kVA 360kVA 120kVA 240kVA Heating value 2.5kW 5.0kW 7.5kW 3.4kW 5.9kW Cooling flow rate 12.8m 3 /min 25.6m 3 min 38.4m 3 /min 17.2m 3 /min 30.0m 3 /min *The calculated values for this chart are 0.9 load factor, 40 C room temperature and 30 C outside air temperature. The heating value and cooling flow rate are the values of the rated output after the battery completes charging. Ventilation rate Individual battery Combination Backup time Ventilation rate Remarks E33A104 5 minutes 2.6m 3 /min E33A204 5 minutes 2.6m 3 /min 2 sets E33A304 5 minutes 2.6m 3 /min 3 sets E33AR104 5 minutes 2.6m 3 /min 2 sets E33AR204 5 minutes 2.6m 3 /min 3 sets Common battery Combination Backup time Ventilation rate Remarks E33A104 5 minutes 2.6m 3 /min E33A204 5 minutes 5.4m 3 min 10 minutes 8.2m 3 /min E33A304 5 minutes 8.0m 3 /min 8 minutes 10.8m 3 /min E33AR104 5 minutes 5.4m 3 /min 10 minutes 8.2m 3 /min E33AR204 5 minutes 8.0m 3 /min 10 minutes 10.8m 3 /min External dimensions Dimension (mm) W D H 700 800 1900 I/O Power cabinet Combination Dimension (mm) W D H Individual battery Common battery (built-in DC branching circuit) Standard type External type Standard type External type E33A104 500 E33A204 800 800 1300 1300 E33A304 1000 1000 1500 1500 800 1900 E33AR104 800 800 1300 1300 E33AR204 1000 1000 1500 1500 cabinet individual battery (for a 0.8 load factor) Combination Backup time Dimension (mm) W D H E33A104 5 minutes 700 10 minutes 1100 E33A204 5 minutes 700x2 10 minutes 1100x2 E33A304 5 minutes 700x3 10 minutes 1100x3 800 1900 E33AR104 5 minutes 700x2 10 minutes 1100x2 E33AR204 5 minutes 700x3 10 minutes 1100x3 *The backup time for 25 C ambient temperature and the initial value. *Contact us about the 30, 60, 120, 180 minute backup times and the 0.9 load factor. cabinet common battery (for a 0.8 load factor) Combination Backup time Dimension (mm) W D H E33A104 5 minutes 700 10 minutes 1100 E33A204 5 minutes 1400 10 minutes 2200 E33A304 5 minutes 2200 8 minutes 2700 800 1900 E33AR104 5 minutes 700 10 minutes 1100 E33AR204 5 minutes 1400 10 minutes 2200 I/O cabinet (Parallel redundant operation) 50 1900 700 800 50 H W D cabinet I/O cabinet (Parallel operation) 50 H W D 50 H W D 5

System Configuration Diagram Single Operation Without external With external Parallel Operation (200kVA) / Parallel Redundant Operation (100kVA) Each shares a battery (common battery) Each is connected to a separate battery (individual battery) Without external *For parallel operation if the output is 200kVA or less, the can be separated into a single unit. With external 6

Parallel Operation (300kVA) / Parallel Redundant Operation (200kVA) Each shares a battery (common battery) Each is connected to a separate battery (individual battery) Without external With external *Contact us about the 2-system input, the output branching, and other system configurations. 7

Notes when investigating use of this product in your applications Before starting installation, assembling and use, read the Operation Manual carefully and use the product correctly in your applications. When you are going to use this product in the following application, the special considerations are required for operation, running, maintenance and control. Be sure to consult with our company as a part of your investigations. (a) Medical equipment and other equipment that are related directly to human life. (b) Train or elevator that can give injury to human body. (c) Socially and publicly important computer systems. (d) And other equipment that are related to safety of human life and that can affect severe effects on maintenance of public functions. For the applications that undergo vibration such as vehicles, ships and transportation facilities, please consult with our company. Never modify this product or give additional processing to this product. For the installation andmaintenance work, please consult with our company or with specialized company. For any inquiry or consultation, please contact our sales representative. https://www.sanyodenki.com 3-33-1 Minami-Otsuka, Toshima-ku, Tokyo 170-8451, Japan P.A. Paris Nord Ⅱ, 48 Allée des Erables-VILLEPINTE, BP.57286, F-95958 ROISSY CDG Cedex, France 468 Amapola Avenue Torrance, CA 90501, U.S.A. Room 2106-2110, Bldg A, Far East International Plaza, No.319, Xianxia Road, Shanghai, 200051, China Beijing Branch Room1222, Tower B, Beijing COFCO Plaza, No.8 Jianguomennei Dajie, Dong Cheng District, Beijing 100005 China Room 2305, 23/F, South Tower, Concordia Plaza, 1 Science Museum Road, TST East, Kowloon, Hong Kong N-711, 7F, Chia Hsin 2nd Bldg., No.96, Sec.2, Zhongshan N. Rd., Taipei 10449, Taiwan (R.O.C.) 988 Toa Payoh North, #04-08, Singapore 319002 Indonesia Representative Office Summitmas II 4th Floor, Jl. Jend. Sudirman Kav.61-62, Jakarta 12190, Indonesia Frankfurter Strasse 80-82, 65760 Eschborn, Germany 15F, KDB Building, 372, Hangang-daero, Yongsan-gu, Seoul, 04323, Korea Busan Branch 8F, CJ Korea Express Bldg., 119, Daegyo-ro, Jung-gu, Busan, 48943, Korea 2F 02-11, Shenzhen International Chamber of Commerce Tower, No.168 Fuhua 3 Road, Futian District, Shenzhen, 518048 China Tianjin Branch Room AB 16th Floor TEDA Building, No. 256 Jie Fang Nan Road, Hexi District, Tianjin 300042 China Chengdu Branch Room2105B, Block A, Times Plaza, 2 Zongfu Road, Jinjiang District, Chengdu, 610016 China 388 Exchange Tower, 25th Floor, Unit 2501-1, Sukhumvit Road, Klongtoey, Klongtoey, Bangkok 10110 Thailand TEL: +81 3 5927 1020 TEL: +33 1 48 63 26 61 TEL: +1 310 783 5400 TEL: +86 21 6235 1107 TEL: +86 10 6522 2160 TEL: +852 2312 6250 TEL: +886 2 2511 3938 TEL: +65 6223 1071 TEL: + 62 21 252 3202 TEL: +49 6196 76113 0 TEL: +82 2 773 5623 TEL: +82 51 796 5151 TEL: +86 755 3337 3868 TEL: +86 22 2320 1186 TEL: +86 28 8661 6901 TEL: +66 2261 8670 The names of companies and/or their products specified in this catalogue are the trade names, and/or trademarks and/or registered trademarks of such respective companies. *Remarks : Specifications Are SubjectTo Change Without Notice. CATALOG No. P0947B004 17.11.IT