Emergency Stop Devices Description The cable/push button operated system can be installed along or around awkward machinery such as conveyors and provide a constant emergency stop access. The is the only device of its kind to incorporate the following features in one unit making it the most versatile cable switch on the market. 1. The positive mode mechanism ensures that the contacts are immediately latched open on actuation and can only be reset by the intentional action of turning the blue reset knob. The design also protects against nuisance tripping and the effects of thermal expansion. 2. A mushroom head emergency stop button is included on the unit to provide E-Stop access even at the extreme ends of the span. 3. The cable status indicator makes the system easy to set up and maintain for spans up to 125 meters. 4. Four sets of contacts are provided: 2 + 2 N.O., 3 + 1 N.O., or 4 contacts. 5. Sealed to IP 66 with rugged construction using die cast alloy and stainless steel to withstand harsh conditions. Features Switches up to 125 meter span Universal mounting and operation Lid mounted emergency stop button, designed to conform to EN418 Switch lockout on cable pulled and cable slack Cable status indicator on switch lid Specifications Standards EN60947-5-5, ISO13850, ISOTR 12100, IEC 60947-5-1, EN 418 Approvals CE marked for all applicable directive, culus and BG Safety Contact 2 or 3 or 4 direct opening action Designation/Utilization Cat. A600/AC-15 (Ue) (Ie) N600/DC-13 (Ue) (Ie) 600V 500V 240V 120V 1.2A 1.4A 3A 6A 600V 500V 250V 125V 0.4A 0.55A 1.1A 2.2A Thermal Current (lth) 10A Minimum Current 5V 5mA Safety Contact Gap >2 x 2mm (0.078in) Rtd. Insulation Voltage (Ui) 500V Rtd. Impulse withstand (Uimp) 2500V Voltage Pollution Degree 3 Max. Actuation Frequency 1 Cycle per sec Case Material Heavy duty die cast alloy Eye Nut Material Stainless Steel Emergency Stop & Indicator Acetal Material Protection IP66 Conduit Entry 3 x M20, 3 x 1/2in NPT, quickdisconnect style Operating Temperature -25 C to 80 C (-13 F to 176 F) Operation Force <125N (300mm deflection; 28.1lb deflection) Max Cable Span Between Switches 75m (246ft) standard model 75m to 125m extended length model Fixing 4 x M5 Mounting Any position Mechanical Life 1,000,000 Weight 630g (1.38lb) Colour Yellow body, Red E-Stop button, Blue reset button Important: It is recommended that the LRTS (Lifeline Rope Tensioning System) should be used with the cable rope switch. Lid mounted E-Stop button A mushroom head emergency stop button is included on the unit to provide total E-Stop access even at the extreme ends of the span. Cable status indicator on lid The cable status indicator makes the system easy to setup and maintain for spans up to 125 meters. 6-8
Product Selection Emergency Stop Devices Cable Span Safety Contacts Auxiliary Contacts Up to 75m 75 to 125m Catalogue Number 1/2in NPT Conduit M20 Conduit Quick Disconnect 2 2 N.O. 440E-L13133 440E-L13137 440E-L13140 3 1 N.O. 440E-L13043 440E-L13042 440E-L13141 4 440E-L13135 440E-L13139 440E-L13142 2 2 N.O. 440E-L13155 440E-L13153 440E-L13163 3 1 N.O. 440E-L13152 440E-L13150 440E-L13164 4 440E-L13149 440E-L13147 440E-L13165 Recommended Standard Cable Connector/Cordset (2m (6.5ft) (see page 15-13). 889M-F12X9AE-2 Accessories Description P. Bolt complete M8 x 1.25 Thread Size 58mm (2.28in) Threaded Length 12mm (0.47in) Dia. Eye 95mm (3.74in) Overall Length Tensioner spring 19mm (0.75in) Diameter 210mm (8.27in) Overall Length 50N Force Catalogue Number 440E-A17003 440E-A13078 Replacement cover 440E-A13054 Replacement cover no E-Stop 440E-A17115 Inside corner pulley 440A-A17101 Outside corner pulley 440A-A17102 Mounting Bracket 440E-A17130 6-9
Emergency Stop Devices Accessories Description Indicator, M20 Conduit Pilot Light Amber Lens T-3 1/4 Insert Use T-3 ¼ Bulb (Sold Separately) Indicator, 1/2in NPT Conduit Pilot Light Amber Lens T-3 1/4 Insert Use T-3 1/4 Bulb (Sold Separately) Indicator, M20 Conduit Pilot Light Amber Lens Bayonet Style Insert Indicator, 1/2in NPT Conduit Pilot Light Amber Lens Bayonet Style Insert Indicator, M20 Conduit Pilot Light Red Lens T-3 1/4 Insert Use T-3 1/4 Bulb (Sold Separately) Indicator, 1/2in NPT Conduit Pilot Light Red Lens T-3 1/4 Insert Use T-3 1/4 Bulb (Sold Separately) Indicator, M20 Conduit Pilot Light Red Lens Bayonet Style Insert Indicator, 1/2in NPT Conduit Pilot Light Red Lens Bulb, 24V for Conduit Pilot Light 2.8W T-3 1/4 Bulb, Miniature Screw Base Bulb, 110V for Conduit Pilot Light 2.6W T-3 1/4 Bulb, Miniature Screw Base Bulb, 240V for Conduit Pilot Light 2.75W T-3 1/4 Bulb, Miniature Screw Base Red LED Bulb, 24V AC/DC for Conduit Pilot Light Amber LED Bulb, 24V AC/DC for Conduit Pilot Light Red LED Bulb, 120V AC for Conduit Pilot Light Amber LED Bulb, 120 AC for Conduit Pilot Light Catalogue Number 440A-A19001 440A-A19005 440A-A17124 440A-A17122 440A-A19002 440A-A19007 440A-A17125 440A-A17123 440A-A09056 440A-A09055 440A-A09054 800E-N157R 800E-N157A 800E-N169R 800E-N169A 6-10
Approximate Dimensions mm (inches) Dimensions are not intended to be used for installation purposes. Emergency Stop Devices Standard Model 85 (3.35) 51 (2.01) 81 (3.19) min. to 94.5 (3.72) max. 115 (4.53) 37 (1.46) 10.5 (0.41) 48 (1.89) 62 (2.44) 25.5 (1.0) 4 Mounting Holes Clearance for M5 Screws 101 (3.98) 7.0 (0.28) Extended Length Models (75 to 125m cable span) 48 (1.89) 62 (2.44) 51 (2.0) 85 (3.35) Emergency Stop Button Reset Button 4 Mounting Holes Clearance for M5 Screws 101 (3.98) 7.0 (0.28) 85 (3.35) 51 (2.01) 81 (3.19) min. to 94.5 (3.72) max. 115 (4.53) 37 (1.46) 10.5 (0.41) 25.5 (1.0) 6-11
Emergency Stop Devices Typical Wiring Diagrams Connector Pinout 8 9 1 7 12 10 2 6 11 3 5 4 4 3 + 1 N.O. 2 + 2 N.O. Terminal Contact Terminal Contact Terminal Contact 1 11 11 11 3 12 12 12 4 21 21 21 6 22 22 22 7 31 31 33 8 32 32 34 N.O. 9 41 43 43 N.O. 10 42 44 44 N.O. 12 Ground Contact Action Contact Open 0mm 11/12 21/22 31/32 41/42 Contact Closed 4 style 3 + 1 N.O. style 2 + 2 N.O. style 3 6 9 10.5 13.5 0mm 11/12 21/22 31/32 43/44 3 6 9 10.5 13.5 0mm 11/12 21/22 33/34 43/44 3 6 9 10.5 13.5 Cable Slack Cable Tension Range Cable Pulled Cable Slack Cable Tension Range Cable Pulled Cable Slack Cable Tension Range Cable Pulled 6-12
Application Detail mm (inches) Mounting Specifications Cable Grips Steel Cable Tensioner Emergency Stop Devices P. Bolts E-Stop Button Tension Indicator 300 (11.81) 2-3m (6.5-9ft) 75m (246ft) Reset Knob Mounting Specifications with Spring Tensioner Cable Grips Steel Cable Tensioner P. Bolts Lifeline Tensioner Spring Tension Indicator 300 (11.81) 2-3m (6.5-9ft) 10m (32ft) Wall Mounting Specifications for Extended Length Models Cable Grips Steel Cable Tensioner Tensioner P. Bolts E-Stop Button Tension Indicator 300 (11.81) 2-3m (6.5-9ft) 75-125m (246-410ft) Reset Knob 6-13