ECOVAC ECO EVO EXO ECOVAC SERIES - 1
THE ULTIMATE PIECE OF HEAVY DUTY EQUIPMENT At KOKS Special Products everything revolves around the development and production of vehicles for vacuum, suction and blowing technique. The combination of our experience with and knowledge of this equipment makes us a reliable partner for the industrial cleaning sector for years on end. The ECOVAC vacuum truck was created and brought to perfection as a result of close cooperation and regular consultation between our customers (the specialists from the field!) and our team of experts in the area of engineering, production and after-sales. ENGINEERING for development of the ECOVAC with: Large capacity. Reliability. Low fuel consumption. Easy control. Top-class ergonomics and safety system. Strength calculation according to the Boiler Inspection Agency and FEM strength calculation. PRODUCTION for production of the ECOVAC with: Application of high-quality sustainable materials. Certified welding system. Selected technical X-ray inspection. Sound final inspection with signed checklist. Unique preservation method. AFTER-SALES for supply of service to you by way of: Well documented instruction/ component manuals with drawings, parts lists and failure analysis. Periodic feedback of after-sales to our engineering and production for further perfection. PLC control with easy failure diagnosis. 3D inventor design. The ECOVAC can be used in aggressive environments and has a long lifecycle, as after construction all components are disassembled, separately blasted, zincmetallized and spray-painted. PLC control makes it easy for you to remedy possible trouble on site, in consultation with our after-sales service department. Safety: Due to the rear door safety lock and 2-hand rear door control, it is possible to clean the inner tank in a safe way. 2 - ECOVAC SERIES
KOKS ECOVAC SERIES This series consists of three standard models: ECOVAC ECO, ECOVAC EVO and ECOVAC EXO. The trucks are identical when it comes to quality but are equipped differently on the basis of optional kits which are in line with your requirements and industrial applications. Carefree suction and pressurizing The trucks of the KOKS ECOVAC series were especially developed for heavy industrial applications and, depending on the chosen model, are suitable for handling liquid and hazardous substances, such as: Liquids. Sludge. Grease. Oil. Fuels. Chemical substances. The ECOVAC The ECOVAC design was effected thanks to our long experience and offers the optimal balance between: The chassis with a maneuverable, short wheel base and a maximum tank volume. Application of solid constructions & heavy duty components and a maximum payload. High-quality & a long life span and a competitive investment & low running costs. Especially for working with hazardous and contaminated substances the trucks are available in the following editions: GGVSE, ADR, PED and ATEX. The KOKS ECOVAC is standard equipped with a high air flow liquid ring vacuum pump, which will secure processing large quantities of liquids or heavy sludges in a very short period of time. Time and cost saving will be your benefit. General specifications ECOVAC Tank : vacuüm; 12 m 3. Pump : liquid ring vacuum pump from 2.400 m 3 /h to 3.000 m 3 /h. Tank : service water; 1,2 m 3. Tipping device : 45-50 tipping angle. Rear door : hydraulic opening cylinder/clamps. ECOVAC ECO The perfect unit for everyday use for general vacuum applications. The ECOVAC ECO is suitable for handling various liquids and sludges and can be used for sewer cleaning, emptying septic tanks and grease traps. ECOVAC EVO The right, multifunctional unit for sludge and hazardous substances. The ECOVAC EVO is specially designed for aspirating and handling sludges and hazardous products and will be the best choice when the most economic and powerful machine with high capacities and operators convenience is demanded. ECOVAC EXO The ultimate unit for the petrochemical industry and refineries. The ECOVAC EXO is suitable for aspirating, handling and transportation of hazardous and nonhazardous liquids and sludges and will be the best solution when the highest standard of safety, quality and operators convenience is expected. ECOVAC SERIES - 3
ECOVAC ECO Rear door with manually operated clamps. 4 - ECOVAC SERIES
Special features ECOVAC ECO body: Vacuum pump with a capacity of min. 2.400 m 3 /h. Pressure/vacuum tank with a volume of 12 m 3, excl. service water tank. Service water tank of 1,2 m 3. Suited for assembly on a 3-axle chassis with a min. engine power of 320 hp. Vacuum pump drive by means of a gear box p.t.o. Tool/coupling box, hose box. 4 suction/discharge connections. Rear door with manually operated clamps. Control box. Discharging by means of tipping (45 ). Pressurizing by means of a 4-way valve. Fixed bumper. 4-way valve. Floating stainless steel shutt off ball. ECOVAC SERIES - 5
ECOVAC EVO Control box. 6 - ECOVAC SERIES
Special features ECOVAC EVO body: Vacuum pump with a capacity of 2.400 m 3 /h - 3.000 m 3 /h. Pressure/vacuum tank with a volume of 12 m 3, excl. service water tank. Service water tank of 1,2 m 3. Suited for assembly on a 3-axle chassis with a min. engine power of 320 hp. Vacuum pump drive by means of a gear box p.t.o. Walkway on the left hand side. Tool/coupling box, hose box of unpainted stainless steel. 6 suction/discharge connections. Rear door with hydraulic clamps. Control box made of stainless steel. Discharging by means of tipping (45 ). Compressor. Designed and certified for ADR hazardous substances within classes 2009-6.10, tank codes S4AH and L4AH. Walkway. Suction/discharge connections. ECOVAC SERIES - 7
ECOVAC EXO Rising tube. 8 - ECOVAC SERIES
Special features ECOVAC EXO body: Vacuum pump with a capacity of 2.400 m 3 /h - 3.000 m 3 /h. Pressure/vacuum tank with a volume of 12 m 3, excl. service water tank. Service water tank of 1,2 m 3. Tank material stainless steel 316 grade. Suited for assembly on a 3-axle chassis with a min. engine power of 320 hp. Vacuum pump drive by means of a gear box p.t.o. Walkway on the left and right hand side. Tool/coupling box, hose box of stainless steel. 6 suction/discharge connections. Rear door with hydraulic clamps. Control box made of stainless steel. Discharging by means of tipping (50 ). Hinged bumper, hydraulically operated. Designed and certified for ADR hazardous substances within classes 2009-6.10, tank codes S4AH and L4AH. Compressor. High pressure kit. Piping course through the tipping point, which enables the vehicle to perform suction activities with the tank in tipped position. Compressor. High pressure hose reel. ECOVAC SERIES - 9
VARIOUS OPTION KITS HIGH PRESSURE KIT High pressure pump 70 l/min.; 120 bar. Hose reel, manually operated. Clean water tank 1.500 litres, integrated in the service water tank. Forced water drain. SAFETY KIT Fire extinguisher. Emergency stop reel. Tank tipping control. Rear door safety lock. Repair cross beam. SIR SAFETY KIT 2-hand control rear door safety lock. Earth grounding device, incl. earth cable. Earth reel. Book of certificates, incl. all required documents. Inspection. Remaining SIR requirements. TANK MATERIAL OPTIONS Stainless steel AISI 304 grade. Stainless steel AISI 316 grade. DISPLACEMENT SYSTEM Fluid/sludge pump. For continuous transport of fluids. VACUUM PUMP OPTIONS 3.000 m 3 /h vacuum pump. 2.400 m 3 /h vacuum pump. 10 - ECOVAC SERIES
SCRUBBER For adsorption of hazardous and/or malodorous fumes out of the return air from the vacuum pump in 2 phases. Stainless steel. Volume approx. 350 litres adsorption liquid in each compartment. 2 compartments, equipped with inspection opening. Filling connection. Drain. Level indication. EXPLOSION SAFETY KIT ATEX zone II execution. Explosion safety system. ATEX vacuum pump, incl. min. level protection. ATEX butterfly valves. ATEX level detection switches on behalf of the various tanks. ATEX nonreturn valves. ATEX electric system according to EN 13463-1-2001 / EN 13463-5-2003. ATEX beacon, warning and working lights. ATEX emergency stop system. ATEX ball valves, incl. couplings. ATEX spark arrestor. ATEX earth grounding device, incl. cable reel. Risk analysis and inspection list. ADR PRESSURE/VACUUM KIT GGVSE/ADR pressure/vacuum tank. Body designed and certified for operation with ADR hazardous substances within classes 2009-6.10, tank codes S4AH and L4AH. Roll bars. Pneumatic lock on the tank and valves. GGVSE/ADR pressure/vacuum tank. Explosion pressure 8,7 bar, according to the ADR directions (from 01-01-1999). GGVSE/ADR number plates. GGVSE/ADR label holders. Fire extinguishers 2x 6 kg, plastic housing. Double insulated wiring. GGVSE/ADR final inspection. Project design calculations. Pressure test. Nitrogen connection. X-ray of the longitudinal and round welded joints. TANK 16 m 3, suited for assembly on a 4-axle chassis. COMPRESSOR KITS Compressor max 200 m 3 /h. Compressor max 350 m 3 /h. COOLER Cooling system in order to improve performance of the vacuum pump. ECOVAC SERIES - 11
KOKS SPECIAL PRODUCTS Diamantweg 1 1812 RC Alkmaar, Holland Tel. : +31 (0)72 540 66 99 Fax : +31 (0)72 540 55 40 E-mail : info@koksspecialproducts.com Internet : www.koksspecialproducts.com Subject to alterations. Copyright KOKS bv 8/2010 12 - ECOVAC SERIES