WHAT S NEW JPRO Professional Diagnostic Software Regen Zone Information providing detailed information concerning regeneration zones. JPRO Professional Diagnostic Software with NextStep Now integrates with Noregon s NextStep NET. o View troubleshooting information, wiring diagrams and step-by-step repair procedures for a fault with one click in JPRO Commercial Vehicle Diagnostics. o Enhanced integration features from the troubleshooting repair view: View fault related data while simultaneously viewing repair procedures. Clear faults to verify the repair without leaving the NextStep screen. Access Bi-Directional functionality directly from the troubleshooting repair view. o Works on vehicle without requiring a VIN. o Engines and Aftertreatment systems are currently supported. o Regular content updates to add more fault and component coverage. Continues to automatically link to troubleshooting guides for Wabco, Bendix and Haldex brakes as well as Eaton transmissions. 1
JPRO Heavy-Duty Support for Cummins Additional Bi-Directional support for Cummins engines: Bi-Directional Test DEF System Leak Test EPA 10 ISB, ISC, ISL, and ISX EPA 13 ISB, ISL, ISX (12L and 15L) Note: Cummins GHG17 engines are not currently supported. JPRO Heavy-Duty Support for Detroit Additional Bi-Directional support for Detroit engines: Bi-Directional Test DEF Quantity Test EPA 10 to EPA 13 for all DD13, DD15 and DD16 JPRO Heavy-Duty Support for International Additional Bi-Directional support for International engines: Bi-Directional Test or Calibration Fuel Pressure Adaptation Reset Idle Shutdown Time Road & Cruise Speeds NOTE: Access to this can be removed. Contact Noregon support for more information. EPA 07 to EPA 13 Maxxforce 7 engines EPA 07 Maxxforce 7, DT, 9, and 10 engines EPA 10 Maxxforce 7, DT, 9, 10, 11, 13 and 15 engines EPA 07 Maxxforce 7, DT, 9, and 10 engines EPA 10 Maxxforce 7, DT, 9, 10, 11, 13 and 15 engines JPRO Heavy-Duty Support for Mack and Volvo Additional Bi-Directional support for Mack and Volvo engines: Bi-Directional Test DEF Pressure System Test EPA 13 JPRO Heavy-Duty Support for Paccar Additional Bi-Directional support for Paccar engines: Bi-Directional Test DEF Doser Pump Test EPA 10 to EPA 13 MX engines Note: Paccar GHG17 engines are not currently supported. 2
JPRO Professional Diagnostic Software Includes all features provided by the following features: JPRO Heavy-Duty Features JPRO Heavy-Duty Support for Cummins JPRO Heavy-Duty Support for Detroit JPRO Heavy-Duty Support for International JPRO Heavy-Duty Support for Mack and Volvo JPRO Heavy-Duty Support for Paccar JPRO Medium-Duty Support for Ford JPRO Medium-Duty Support for GM JPRO Medium-Duty Support for Isuzu JPRO Medium-Duty Support for Sprinter FEATURE LIST Also, includes the following features: Dashboard Brake Lamp Tests on all Wabco and Bendix EC-80 braking systems. Wheel Speed Window Test and Wheel Speed Chart Test used to verify and test wheel speed sensors on all tractor and trailer braking systems. Access to historical fault data from previous JPRO connections which can be used to identify intermittent vehicle issues. NOTE: Requires internet access. Ability to remove access to setting road and cruise speed limits. If interested in limiting these capabilities, contact Noregon support (support@noregon.com). Fault Assistance providing technician friendly descriptions for fault status values from both the Fault Display and the Data Monitor. Overall vehicle health indicators including Active Faults Present, Battery Voltage Low, Consumable Fluid(s) Low, No J1939 Data, Cannot Detect ABS, DPF Regen Needed and DPF Regen Inhibited. Diagnostic connector pinout diagrams for Heavy-Duty and Medium-Duty cable connectors to aid in troubleshooting connection issues. 3
JPRO Professional Diagnostic Software with NextStep Includes all features in JPRO Professional Diagnostics Software. Also, includes the following features: Integrates with Noregon s NextStep NET. o View troubleshooting information, wiring diagrams and step-by-step repair procedures for a fault with one click in JPRO Commercial Vehicle Diagnostics. o Enhanced integration features from the troubleshooting repair view: View fault related data while simultaneously viewing repair procedures. Clear faults to verify the repair without leaving the NextStep screen. Access Bi-Directional functionality directly from the troubleshooting repair view. o Works on vehicle without requiring a VIN. o Engines and Aftertreatment systems are currently supported. o Regular content updates to add more fault and component coverage. Automatically link to troubleshooting guides for Wabco, Bendix and Haldex brakes as well as Eaton transmissions. JPRO Professional Diagnostic Software for AU Includes all features provided by the following: JPRO Heavy-Duty Features JPRO Heavy-Duty Support for Cummins JPRO Heavy-Duty Support for Detroit JPRO Heavy-Duty Support for International JPRO Heavy-Duty Support for Paccar JPRO Medium-Duty Support for Isuzu JPRO Medium-Duty Support for Sprinter NOTE: Mack and Volvo, Ford, GM and JPRO NextStep are not supported in Australia. Also, includes the following features: Dashboard Brake Lamp Tests on all Wabco and Bendix EC-80 braking systems. Wheel Speed Window Test and Wheel Speed Chart Test used to verify and test wheel speed sensors on all tractor and trailer braking systems. Access to historical fault data from previous JPRO connections which can be used to identify intermittent vehicle issues. NOTE: Requires internet access. Ability to remove access to setting road and cruise speed limits. If interested in limiting these capabilities, contact Noregon support (support@noregon.com). Fault Assistance providing technician friendly descriptions for fault status values from both the Fault Display and the Data Monitor. Overall vehicle health indicators now include DPF Regen Needed and DPF Regen Inhibited. Diagnostic connector pinout diagrams for Heavy-Duty and Medium-Duty cable connectors to aid in troubleshooting connection issues. 4
JPRO Heavy-Duty Features Heavy Duty supports all standard Heavy Duty vehicles. Supports the heavy duty SAE J1587/J1708, J1939, ISO 15765 and KWP2000 messages. Support for trailer diagnostics using the JPRO Trailer Diagnostic adapter or the JPRO DLA+ PLC and the PLC 7- way connector. Graphically displays data using thermometers, gauges, etc. on the Data Monitor. Display of data related to reported faults in Data Monitor. Ability to define custom groups of related data parameters to display in Data Monitor. Power Diagram and Electrical Assistance available in Data Monitor to aid in the diagnosis of electrical problems. FMI Assistance providing technician friendly descriptions for fault code FMI values from both the Fault display and the Data Monitor. Aftertreatment screen display of data, including EGR data for rapid troubleshooting of the aftertreatment system. Emissions Assistance from the Aftertreatment screen to aid in troubleshooting emissions problems. Clear indication of overall vehicle health taking into account: Active Faults Present Consumable Fluid(s) Low Cannot Detect ABS (on 2001 or newer vehicles) Battery Voltage Low No 1939 Data (on 2009 or newer vehicles) DPF Regen Needed DPF Regen Inhibited Search mechanism to link to troubleshooting guides. Provides data bus utilization statistics on live heavy duty vehicle connections. Diagnostic connector pinout diagrams for Heavy-Duty and Medium-Duty cable connectors. Launches OEM component diagnostic applications in Fault Code Information. Simply click on the OEM application icon to launch the application for more information about that component. Displays the trailer lamp status on tractor brake key data point s window. Consumable Fluid screen to monitor fluids used by vehicle and inform user of low levels. Support for reading and display of HD-OBD Emissions faults in standard fault display. Support reading Bendix Proprietary Fault Codes on all EC-80 braking systems. Regen Zone Information providing detailed information concerning regeneration zones. 5
JPRO Heavy-Duty Support for Cummins Support reading Cummins Proprietary Fault Codes on all EPA 07 and newer Cummins engines. Support for proprietary sensor data on all EPA 07 and newer Cummins engines. Bi-Directional support for Cummins engines: Bi-Directional Test or Calibration Aftertreatment Maintenance Reset Cylinder Cut Out DEF Doser Pump Override Test DEF System Leak Test DPF Service Regen Fuel Injector Calibration Fuel Injector Reset Fuel Leakage Test Idle Shutdown Road & Cruise Speed Limits NOTE: Access to this can be removed. Contact Noregon support for more information. Trip Reset VGT Electronic Actuator Installation and Calibration VGT Hysteresis Test EPA 07 to EPA 13 all ISB, ISC, ISL, ISM and ISX EPA 02 to EPA 13 all ISB, ISC, ISL, ISM and ISX EPA 10 ISB, ISC, ISL, and ISX EPA 13 ISB, ISL, ISX (12L and 15L) EPA 10 ISB, ISC, ISL, and ISX EPA 13 ISB, ISL, ISX (12L and 15L) EPA 07 to EPA 13 all ISB, ISC, ISL, ISM and ISX NOTE: Can be started from either the Bi-Directional test selection or the Aftertreatment Diagnostics screen. EPA 07 and 10 ISC, ISL, and ISX (12L and 15L) with Common Rail Fuel Systems EPA 13 all ISB, ISL, and ISX EPA 10 and 13 Common Rail Fuel Systems EPA 07 to EPA 13 all ISB, ISC, ISL, ISM and ISX EPA 07 to EPA 13 all ISB, ISC, ISL, ISM and ISX EPA 07 to EPA 13 all ISB, ISC, ISL, ISM and ISX EPA 10 and 13 ISB, ISC, ISL, and ISX (12L and 15L) EPA 10 and 13 ISB, ISC, ISL, and ISX (12L and 15L) with Common Rail Fuel Systems Note: Cummins GHG17 engines are not currently supported. 6
JPRO Heavy-Duty Support for Detroit Support for reading Detroit proprietary Fault Codes on all 2000 model year and newer Detroit engines. Support for proprietary sensor data on all 2000 model year and newer Detroit engines. Bi-Directional support for Detroit engines: Bi-Directional Test or Calibration Cruise Speed Limits NOTE: Access to this can be removed. Contact Noregon support for more information. Cylinder Cut Out DEF Quantity Test DPF Ash Accumulator Reset DPF Service Regen Idle Shutdown Enable/Disable and Time Set Road Speed Limits NOTE: Access to this can be removed. Contact Noregon support for more information. SCR Airless Doser System (ADS) Self Check SCR Output Component Test EPA 10 to EPA 13 for all DD13, DD15 and DD16 2000 to 2017 all Series 50, 55, 60, DD13, DD15, and DD16 EPA 10 to EPA 13 for all DD13, DD15 and DD16 EPA 07 Series 60 and DD15 EPA 10 to EPA 13 for all DD13, DD15, and DD16 EPA 07 to EPA 13 all DDEC VI Series 60, DD13, DD15 and DD16 NOTE: Can be started from either the Bi-Directional test selection or the Aftertreatment Diagnostics screen. EPA 10 to EPA 13 for all DD13, DD15, and DD16 EPA 10 to EPA 13 for all DD13, DD15 and DD16 EPA 13 all DD13, DD15, and DD16 EPA 10 to EPA 13 for all DD13, DD15, and DD16 7
JPRO Heavy-Duty Support for International Support for proprietary sensor data on all EPA 07 and newer International engines. Bi-Directional support for EPA 07 to EPA 13 engines: Bi-Directional Test or Calibration Actuator Test Aftertreatment Reset CDPF Reset Cylinder Cut Out DEF Doser Pump Override Test DOC/DPF Replacement Reset DPF Service Regen Fuel Pressure Adaptation Reset Idle Shutdown Time KOEO Injector Test KOEO Standard Test Aftertreatment (AFT) Fuel Shutoff Valve o EPA 10 Maxxforce 11, and 13 engines Aftertreatment (AFT) Fuel Doser o EPA 10 Maxxforce 11, and 13 engines Engine Throttle Valve Position o EPA 10 Maxxforce 11, and 13 engines o N13 SCR engines Exhaust Gas Recirculation (EGR) Valve Position o EPA 10 Maxxforce 11, and 13 engines o N13 SCR engines Exhaust Back Pressure Valve o EPA 10 Maxxforce 11, and 13 engines o N13 SCR engines EPA 07 and EPA 10 Maxxforce 11 and 13 engines EPA 10 Maxxforce 7, DT, 9 and 10 engines EPA 07 Maxxforce 7, DT, 9, 10, 11, and 13 engines EPA 10 Maxxforce 9, DT, 10, 11, and 13 engines N9, N10, and N13 engines N9, N10, and N13 engines N9, N10, and N13 engines EPA 07 Maxxforce 7, DT, 9, 10, 11, and 13 engines EPA 10 Maxxforce 7, DT, 9, 10, 11, and 13 engines NOTE: Can be started from either the Bi-Directional test selection or the Aftertreatment Diagnostics screen. EPA 07 to EPA 13 Maxxforce 7 engines EPA 07 Maxxforce 7, DT, 9, and 10 engines EPA 10 Maxxforce 7, DT, 9, 10, 11, 13 and 15 engines EPA 07 Maxxforce 7, DT, 9, and 10 engines EPA 10 Maxxforce DT, 9, and 10 engines N9 and N10 engines EPA 07 Maxxforce 7, DT, 9, and 10 engines EPA 10 Maxxforce 7, DT, 9, and 10 engines N9 and N10 engines 8
KOER Air Management Test KOER Standard Test Road & Cruise Speeds NOTE: Access to this can be removed. Contact Noregon support for more information. SCR Faults Reset EPA 07 Maxxforce 7, DT, 9, and 10 engines EPA 10 Maxxforce 7, DT, 9, 10, 11, and 13 engines EPA 07 to EPA 13 Maxxforce 7, 9 and 10 engines N9 and N10 engines EPA 07 Maxxforce 7, DT, 9, and 10 engines EPA 10 Maxxforce 7, DT, 9, 10, 11, 13 and 15 engines N9, N10, and N13 engines JPRO Heavy-Duty Support for Mack and Volvo Supports all Mack, Volvo and Prevost vehicles. Displays all standard and proprietary fault codes for all components. Ability to resolve partial Chassis ID to full VINs on Mack/Volvo vehicles. Improved powertrain fault readings on EPA 13 Mack/Volvo vehicles. Mack and Volvo Specific Reports including: Trip Report Life of Vehicle Report NOTE: Reports only available on Mack EPA07 and newer vehicles with the DataMax parameter enabled. NOTE: Reports only available on Volvo 2012 and newer with the DataMax parameter enabled. Bi-Directional support for Mack and Volvo EPA07, EPA10 and EPA13 engines includes: Bi-Directional Test or Calibration Cylinder Cut Out EPA 07 to EPA 13 DEF Pressure System Test EPA 13 DPF Service Regen EPA 07 to EPA 13 DPF System Reset EPA 07 to EPA 13 EGR Function Test EPA 13 Enable or Disable Cruise Control EPA 07 to EPA 13 Learned Data Reset EPA 07 to EPA 13 Set Cruise Max and Min Speeds NOTE: Access to this can be removed. Contact Noregon support for more information. EPA 07 to EPA 13 9
Set Road Speed Limit NOTE: Access to this can be removed. Contact Noregon support for more information. EPA 07 to EPA 13 Set Idle Shutdown Time EPA 07 to EPA 13 Trip Reset Mack EPA 07 and newer vehicles with the DataMax parameter enabled. Volvo 2012 and newer with the DataMax parameter enabled. VGT Function Test EPA 13 VGT Monitor Test EPA 13 NOTE: Mack and Volvo Coverage requires internet access at least once a month. Failure to provide internet access will result in the application limiting use and eventually shutting off the features. NOTE: Mack and Volvo Coverage only supports the following adapters: Noregon DLA+ 2.0, DLA+, DLA+ 2.0 Wireless, DLA+ Wireless and DLA+ PLC Vocom 88890300 NEXIQ USB-Link NEXIQ USB Link 2 JPRO Heavy-Duty Support for Paccar Support for all Paccar Body Controllers and engines including clearing faults. NOTE: Paccar Body Controller faults are only supported on 2007 and newer Kenworth and Peterbilt trucks. NOTE: Paccar Body Controller faults on the KWP2000 protocol can only be read when using the JPRO DLA+, DLA+ Wireless, DLA+ 2.0 or DLA+ 2.0 Wireless adapter. If using the JPRO DLA+ or JPRO DLA+ Wireless adapter, please ensure the label on the back of the adapter indicates it is Rev P Compatible. Support for 2016 Peterbilt and Kenworth trucks with or without the Paccar Y-cable (PACCAR P/N 42-02848) available from the PACCAR dealer network. Bi-Directional support for EPA 10 to EPA 13 engines: Bi-Directional Test Automated Cylinder Performance Test DEF Doser Pump Test DPF Service Regen Install a New or Cleaned DPF EPA 10 to EPA 13 MX engines EPA 10 to EPA 13 MX engines EPA 10 to EPA 13 MX engines NOTE: Can be started from either the Bi-Directional test selection or the Aftertreatment Diagnostics screen. EPA 10 to EPA 13 MX engines 10
Note: Paccar GHG17 engines are not currently supported. JPRO Medium-Duty Support for Ford Supports 2004 to 2016 Ford models: F-series Econoline E-series Transit Connect Transit vehicles Supports the medium duty ISO 15765 and ISO 14229 messages. Gives users the ability to read and clear faults, read freeze frames, read sensor data, and display emission test results. Enables users to run diagnostic tests on components such as the KOEO On Demand Self Test. JPRO Medium-Duty Support for GM Supports the following vehicle models from 2002 to 2017: GMC and Chevy Full Sized Trucks 1500, 2500 and 3500 GMC Express and Chevy Savana All GM Medium Duty vehicles NOTE: Only the powertrain components are supported on 2014-2017 GM vehicles. Supports the medium duty J1850 VPW and GMLAN messages. Gives users the ability to read and clear faults, read freeze frames, read sensor data, and display emission test results. Tests for 2010-2012 Express/Savana with 6.0L Gas Engines. Bi-Directional support for GM engines: Bi-Directional Test Cylinder Cutout DPF Service Regen 2002 to 2017 all diesel and gasoline engines (except GM vehicles with CAT engines) 2010 to 2017 vehicles with a 6.6L Diesel engine 2017 GMC Savana and Chevy Express with a 2.8L Diesel engine 11
JPRO Medium-Duty Support for Isuzu Supports the following vehicle models from 2008-2017 with either the 5.2L (4HK1) or 3.0L (4JJ1) engine in both North America and Australia: N-Series faults and data (engine, DEF and transmission only) F-Series faults (engine and DEF only) Supports the medium duty GMLAN messages. Gives users the ability to read and clear faults and read freeze frames. Displays emission test results in North America. Bi-Directional support for: Bi-Directional Test Cylinder Cut Out DPF Service Regen 5.2L (4HK1) or 3.0L (4JJ1) engine in North America 5.2L (4HK1) or 3.0L (4JJ1) engine in North America JPRO Medium-Duty Support for Sprinter Supports 2007 to 2015 Sprinter vehicles. Sprinter support gives users the ability to read and clear faults, read sensor data, and display emission test results. Bi-Directional support for: Bi-Directional Test or Calibration Cylinder Cut Out Compression Test DPF Service Regen Injector Quantity Adjustment Initialize Rail Pressure Oil Change Reset Display Dimmer Test Routine Gauge Sweep Test LCD Display Test Routine Speaker Test Routine Tire Pressure Monitor Test EPA 07 Diesel Engine EPA 07 Diesel Engine EPA 07 Diesel Engine EPA 07 Diesel Engine EPA 07 Diesel Engine 2007 2015 Instrument Cluster 2007 2015 Instrument Cluster 2007 2015 Instrument Cluster 2007 2015 Instrument Cluster 2007 2015 Instrument Cluster 2007 2015 TPM 12
JPRO Heavy-Duty with OnCommand Connection Upload vehicle connection data to Navistar's OnCommand service. Ability to edit and correct mileage and VIN information upon data submission to OnCommand service. JPRO with ASIST Upload vehicle connection data (of any vehicle make) to the ASIST platform, developed by Decisiv for Volvo and Mack Trucks. Link back to the ASIST case available in Vehicle History and the submission confirmation dialogs. Ability to Select New or Update existing case upon ASIST submission. Additional data is now sent to ASIST system including ECU Software Version. Ability to edit and correct mileage and VIN information upon data submission to ASIST service. NOTE: Installing ASIST will require personnel with ASIST Admin level access to provide ASIST Username and Password. 13
General Features Displays fault codes for all components on the supported data bus protocols. Displays manufacturer flash codes and descriptions for faults when available. Provides key data points in graphical displays for vehicle and components. Prints reports containing faults and key data. Automatically displays all component parameters of interest in the Data Monitor. o Search, sort or filter capabilities to easily identify parameters of interest. o Graph parameter changes over time. Automatically detects OEM applications and provides convenient methods to launch them. Diagnoses all vehicle components in a single application. Automatically connects to all supported and available data buses on the vehicle. Vehicle Readiness List displays information about each identified component. Enables support for GM, Sprinter, Isuzu, Fuso and Hino OBD II emissions faults and data. Troubleshooting information to help resolve issues connecting to a truck. Easy access to JPRO DLA+ Adapter Family test tools to aid in diagnosing connection problems. Links to contact Noregon support or sales from within the application. Support for automatic updates. Ability to perform customized Preventative Maintenance Inspections. Inspection available in XML format as well as in PDF report format. Ability to configure the application to launch at computer startup. Demo mode in Vehicle History enables users to explore JPRO features quickly and easily without needing access to vehicles. Access to What s New document showing all supported features from the Connection Selection and Help menu. Ability to automatically switch between USB or Wireless when connecting with a DLA+ Wireless or DLA+ 2.0 Wireless adapter. Link to download ServiceMaxx and Bendix ACom diagnostic applications from OEM Application Portal. 14
Hardware / Software Configuration The following operating systems are supported: Windows 7 (both 32 and 64 bit versions) Windows 8 and 8.1 Pro (both 32 and 64 bit versions) Windows 10 (both 32 and 64 bit versions) Note: Spanish operating systems are supported. Notes 1) Registration is required before the JPRO Commercial Vehicle Diagnostics application can be used. Valid license key(s) will be required in order to register the application. Please ensure you have license key information available before you install. Registration over the internet is required; offline registration is not supported. 2) The appropriate vehicle adapter driver must be installed in order to connect to a vehicle adapter device. This installation is separate and independent of the JPRO Commercial Vehicle Diagnostics installation. 3) The vehicle adapter driver must be RP1210C compliant and support a minimum of 2 CAN Channels to be used with the JPRO Commercial Vehicle Diagnostics application. 4) The JPRO DLA+ 2.0, DLA+, DLA+ 2.0 Wireless or DLA+ Wireless adapters are required in order to connect to the Ford, GM, Isuzu or Sprinter Medium Duty vehicles. Please ensure you have the latest driver and firmware loaded. To connect to Ford use the OBDII Cable for Ford (red). To connect to GM use the OBDII Cable for GM (yellow). To connect to Sprinter use the OBD Cable for Sprinter (blue for DLA+ adapter family or gray for DLA+ 2.0 adapter family). To connect to Isuzu use the Generic OBD Cable (blue or gray) 5) The JPRO Heavy-Duty Support for - Mack and Volvo only supports the following adapters: Noregon DLA+ 2.0, DLA+, DLA+ 2.0 Wireless, DLA+ Wireless and DLA+ PLC Vocom 88890300 NEXIQ USB-Link NEXIQ USB-Link 2 15