data features ton (27,3 mton) capacity models 0C 4C 5-section 4' (37, m) proportional boom 4-section 0' (,5 m) proportional boom 134' " (41 m) maximum main boom tip height 2-section, ' " (9,3 m) to 55' (1, m) jib ' 11" (, m) maximum tip height 2-speed planetary hoist with 14,0 ( 591 kg) theoretical line pull on bottom layer Removable boom rest Load moment indicator with digital display and overload shutdown 22' 1." (,7 m) out-and-down outriggers at full extension Intermediate and fully extended outrigger charts are standard System pressure gauge Clamp-on mounting Rugged, weatherproof, automotive style electrical system Manitowoc CraneCARESM comprehensive support product guide contents Specifications Outline Dimensions 0C Fully Extended Boom/Jib Range Diagram 0C Fully Extended Boom/Jib Load Charts 0C Intermediate Boom/Jib Range Diagram 0C Intermediate Boom/Jib Load Charts 4C Fully Extended Boom/Jib Range Diagram 4C Fully Extended Boom/Jib Load Charts 4C Intermediate Boom/Jib Range Diagram 0C Intermediate Boom/Jib Load Charts Load Chart Data CraneCARE SM 2 4 7 9 11 13 14
specifications models 0C, 4C 2 Upperworks Boom Booms Inverted T-cross section, 4-or 5-section telescoping type, extended and retracted proportionally by a double-acting hydraulic cylinder and cable-crowd system. 0C 4-Section ' " (9,3 m) to 0' 0" (,5 m). Maximum main boom tip height 111' 4" (33,9 m). 2-section, 31' (9,5 m) to 55' (1, m) jib. Maximum tip height 1' " (, m). 4C 5-section 31' 5/" (9,5 m) to 3' 5/" (37,7 m). Maximum main boom tip height 134' "(41,1 m). 1-section, 31' (9,5 m) jib. Maximum tip height ' 11" (, m). Quick Reeve Boom Point Three high-density nylon sheaves mounted on heavy-duty roller bearings. Two removable pin-type rope guards. Boom Elevation Double-acting hydraulic cylinder. Working range from below horizontal to 0 above. Load Hook 5-ton (4,5 mton) capacity hook with heavyduty swivel and weight is provided for single-line operation. Hoist Hoist Maximum theoretical line speed fpm (1, mpm). Maximum theoretical bottomlayer line pull 14,0 ( 577 kg). Two-speed planetary reducer. Wet multi-disc internal brake is spring-applied, pressure-released. Wire Rope 3' (2,1 m) of 5/" (1 mm) rotation resistant type. Swing System Externally mounted, double-reduction planetary driven by hydraulic motor. Maximum theoretical swing speed 1.5 rpm. Wet multi-disk internal brake is springapplied, pressure-released. Oversized diameter balearing swing circle with external gear. 372 noncontinuous rotation. Outriggers Out-and-down style outriggers, operated independently for precise leveling. 22' 1 1/4" (, m) spread at full extension and 13' 4" (4,1 m) spread at intermediate extension. 1" ( mm) diameter floats. Bubble level located near outrigger controls. Mounting Mounting Pedestal and subframe are mounted to chassis by threaded rods and clamp plates. No welding, drilling, or bolting to truck frame is required. Underframe Out-and-Down Type Stabilizers ' (2,4 m) retracted; 1' " (5, m) extended. Operated independently for precise leveling. Double-acting hydraulic cylinders. Fixed pad size is " (5mm) diameter. Subframe Torsionally resistant, rigid 4-plate design. Mounted under crane full length of truck frame. Rear Underride Protection Supplied on factory-mounted cranes. Fabricated structure mounted under rear of bed. Complies with Bureau Motor Carrier Safety Standard 393.. Boom Rest Heavy-duty fabrication. Easily removed to simplify loading and unloading truck deck. Control System Dual operator platforms are equipped with four single-lever crane controls arranged to ANSI B.5 standards. Fully proportional control valves and system pressure gauge. Each station also includes outrigger and stabilizer controls, engine start/stop, foot throttle, signal horn, boom-angle indicator, bubble levels, load chart and range diagram. Hydraulics Hydraulic System A 3-section vane pump directmounted to power take-off on truck transmission provides 42 gpm (9 lpm) to the hoist, 2 gpm ( lpm) to the boom hoist and telescope circuit, and gpm ( lpm) to the swing and outrigger circuit. 0-gallon (379-liter) baffled reservoir includes suction ball valve with strainer two -micron filters in the return line. Use of SAE O-ring and face seal O-ring hydraulic fittings throughout system. Hydraulic Cylinders All load-holding cylinders are equipped with integral holding valves. Warning Systems Load Moment Indicator Senses boom hoist cylinder pressure, boom length and boom angle. Audio-visual warning indicated overload conditions and overload shutoff feature prevents continuing overload. Operator can access all relative crane configuration and load conditions via display at the operator station. Anti-Two-Block System Audible warning and shutoff functions prevent hook from contacting boom point. Back-Up Alarm Supplied on factory-mounted cranes, electronic audible motion alarm activated when truck transmission is in reverse gear. General Electrical State-of-the-art, weather-resistant components throughout. Automotive style electrical system for easy
specifications installation. Designed to withstand high pressure washing and varying climates. Design/Welding Design conforms to ANSI B.5. Welding conforms to AWS D1.1. Tested to SAE 3 and SAE 75. Manuals Operator, service and parts manuals depict correct crane operation, maintenance procedures and parts listing. Warranty -month warranty covers parts and labor resulting from defects in material and workmanship.. Lifting off the main boom point while the swingaround jib is erected is not intended or approved. 11. All load ratings above the heavy line are based on machine structural competence and do not exceed 5% of tipping. Load ratings below are stability limited and do not exceed 5% of tipping.. Do not operate a Manitowoc truck-mounted crane or accessories within ' (3,05 m) of live power lines. 13. This capacity chart is for reference only and must not be used for specific serial number cranes. 3 Warning 1. The operator must read and understand the owner s manual before operating this crane. 2. Positioning or operation of crane beyond areas shown on this chart is not intended or approved except where specified in owner s manual. 3. Loaded boom angles at specified boom lengths give only an approximation of the operating radius. The boom angle before loading should be greater to account for deflections. Do not exceed the operating radius for rated loads. 4. The operating radius shown in the jib rating chart is for fully extended boom only. When boom is not fully extended, use only loaded boom angle to determine load rating of jib. 5. For boom angles shown on jib load rating chart, use rating of next lower boom angle.. For boom lengths not shown, use rating of next shorter or longer boom length, whichever is less. For radii not shown, use rating of next longer radius. 7. Crane load ratings on outriggers are based on freely suspended loads with the machine leveled and standing on a firm, uniform supporting surface. No attempt shall be made to move a load horizontally on the ground in any direction.. Practical working loads depend on supporting surface, wind, and other factors affecting stability such as hazardous surroundings, experience of personnel, and proper handling, all of which must be taken into account by the operator. 9. The maximum load which may be telescoped is limited by hydraulic pressure, boom angle, and boom lubrication. It is safe to attempt to telescope any load within the limits of the load rating chart. Information 1. Deductions must be made from rated loads for stowed jib, optional attachments, hooks, and loadblocks (see deduction chart). Weights of slings and all other loadhandling devices shall be considered a part of the load. 2. Load ratings above the heavy line are structurally limited capacities. Load ratings below the heavy line are stability limited capacities and do not exceed 5% of tipping. Definitions 1. radius (r ) is the horizontal distance from the axis of rotation to the center of the vertical hoist line or tackle with load applied (see below). 2. Loaded boom angle ( ), as shown in the column headed by, is the included angle between the horizontal and longitudinal axis of the boom base after lifting rated load at rated radius (see below). r models 0C, 4C NOTE: Due to continuing improvements, Manitowoc Boom Trucks reserves the right to change product specifications without notice.
outline dimensions 4 2.5" (73 mm) 0C ' " 0' 0" (9, m) (,4 m) RETRACTED EXTENDED 4C 31' 1" 4' 0" (9,47 m) (37,0 m) RETRACTED EXTENDED ' 9" OAH (3,9 m) 4'." (1,4 m) 22' 4" (,1 m) " (1 01 mm) 32" (13 mm) 13.4" (3 mm) 192" CT (4 77 mm) 9.1" (1 755 mm) 11.3" (27 mm).2" (1 14 mm) 52.5" (1 334 mm) 32." (2 mm) " WB ( 553 mm) " OAL (,19 m) 114" AF (2 9 mm) 27.3" (93 mm) Chassis Data Minimum Truck Requirements 0C 4C Wheease (WB) Cab to Tandem (CT) " ( 553 mm) 192" (4 77 mm) " ( 553 mm) 192" (4 77 mm) models 0C, 4C After Frame (AF) Frame Section Modulus at Area of Operation Frame Section Modulus at Area of Operation* Front Axle Gross Weight Rating Rear Axle Gross Weight Rating Minimum Truck Axle Weight Front** Minimum Truck Axle Weight Back** Nominal Frame Width Weights Total Crane - Out-and-Down Outriggers 22'(,71 m) Flat Bed ' (9, m) Fixed Length Jib 31' (9, m) Fixed Length Jib ' -55' (9, m-1,0 m) Telescopic Jib 114" (2 9 mm).0 in 3 1,000 psi (75 0 kpa) 33.0 in 3 1,000 psi (75 0 kpa) 1,000 ( kg),000 (1 144 kg),0 (3 74 kg),0 (3 75 kg) 34 " (4 mm) 0C 27,1 ( 323 kg) 2,000 (907 kg) 1, (511 kg) 1,754 (79 kg) 114" (2 9 mm).0 in 3 1,000 psi (75 0 kpa) 33.0 in 3 1,000 psi (75 0 kpa) 1,000 ( kg),000 (1 144 kg) 9,0 (4 173 kg),0 (3 75 kg) 34 " (4 mm) 4C 2,5 ( 97 kg) 2,000 (907 kg) (3 kg) *Frame section modules at area of operation requires front bumper stabilizer. **Minimum chassis weight is required to meet 5% stability requirements. Chassis data is general not for engineering. Some dimensions depend on truck selection. OAH Overall Height CT Cab to Tandem CA Cab to Axle WB Wheel Base OAL Overall Length BBC Bumper to Back of Cab AF Afterframe
outline dimensions 5 A 0 Configuration 9." (244 mm) Extended Boom Fixed or Retracted Jib Extended Jib " (3 mm) Maximum Tip Height " " (4 mm) (2 mm) 0C Boom 0' (,5 m) 111' 4" (33,9 m) 142' 1" (43,3 m) 1' " (, m) 1' " (5,4 m) 22' 1." (,74 m) 4C Boom 4' (37, m) 134' " (41,1 m) ' 11" (, m) models 0C, 4C
boom/jib range diagram 0C Range Diagram - Fully Extended model 0C FIRST SECTION SECOND SECTION Pins must be disengaged for this outrigger configuration These marks indicate when beams are fully extended GROUND OUTRIGGERS 222.0 REF - 1' " (5,4 m) 24.0 REF - 22' 0" (,71 m) STABILIZERS All outrigger beams must be extended to full extend mark NOTE: Use this chart only when outriggers and stabilizers are fully extended.
boom/jib load charts 0C Load Ratings - Fully Extended Outrigger Spread Boom A B C D 31 52 4 0 (9,5) (,9) (,7) (,) (,5) 0C Jib Load Ratings Fixed Jib Telescopic Jib 31 31 55 (9,5) (9,5) (1,) Boom 7 (1,) 0 0,000 (27 21) (1,) 75,0 ( 2) (3,1) 71 3,700 (17 554) (3,1) 7 33,00 7 27,0 ( 331) ( 292) (4,) 1 2,00 74,0 79 23,0 ( 973) (11 431) ( 59) (4,) (,1) 4 22,0 19,00 74 1,3 7 17,0 0 14,000 ( ) ( 91) ( 3) (7 729) ( 0) (,1) (7,) 32 1,970 2 1,2 70 14,9 74 13,9 7, (7 97) (7 7) ( 777) ( 323) (5 51) (7,) 55 13,0 5, 71 11, 75,0 ( 19) (5 70) (5 24) (4 44) 79,700` 79,0 (3 039) (2 903) (,7) 4 11,1 0, 7,0 72 9, (5 053) (4 921) (4 559) (4 9) 7,0 7 5, 0 4,000 (2 ) (2 54) (1 14) (,7) (,2) 39, 55,790 3,700 9,1 (3 924) (3 97) (3 94) (3 79) 74 5, 74 5,0 7 3, (2 554) (2 31) (1 74) (,2) 2,7 49,9 59 7,0 5 7,00 (3 02) (3 134) (3 19) (3 211) 72 5,00 72 4,70 7 3,700 (2 295) (2 11) (1 7) (,2) 43 5,0 55 5, 2 5,700 (2 495) (2 554) (2 55) 70 4, 70 4, 74 3,5 (2 0) (1 7) (1 ) (,2) 55 (1,) 3 4,0 4,5 59 4, (1 99) (2 055) (2 091) 7 4,1 7 3,7 72 3,3 (1 73) (1 3) (1 1) 55 (1,) 0 (1,3) 27 3,5 4 3, 55 3,7 (1 01) (1 5) (1 9) 5 3,7 5 3,0 70 3,0 (1 92) (1 497) (1 370) 0 (1,3) 5 (19,) 2,790 2,9 51 3,0 (1 2) (1 33) (1 374) 3 3,0 3 2,0 2,7 (1 497) (1 297) (1 23) 5 (19,) 70 (21,3) 34 2,0 47 2,4 (1 0) (1 7) 0 2,7 0 2,0 2, (1 229) (1 043) (1 5) 70 (21,3) 75 (22,9) 27 1, 43 1,9 (39) (0) 57 2,0 57 1,00 4 2,2 (99) (1) (1 01) 75 (22,9) 0 (24,4) 5 (,9) 90 (27,4) 95 (29,0) 0 (,5) Deduction* Deduction** *for stowed fixed jib **for stowed telescopic jib 1,4 3 1,5 () (5) 33 1,1 (513) 2 00 (33) 00 0 270 2 (272) (9) (2) (0) (2) 900 5 0 3 290 () (2) (11) (0) (132) 55 1,70 55 1,370 2 2,0 (79) (21) (921) 52 1,390 52 990 0 1,70 () (449) (757) 49 1,00 49 0 57 1,3 (41) (299) (0) 4 770 55 1,0 (349) (472) 53 70 (4) 0 (24,4) 5 (,9) 90 (27,4) 95 (29,0) 0 (,5) model 0C Meets ANSI B.5 Requirements - Do not operate crane or accessories within ' (3.05m) of live power lines. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
boom/jib range diagram 0C Range Diagram - Intermediate model 0C OUTRIGGERS & STABILIZERS GROUND.0 REF - 13' 4" (11,22 m) Mark indicates beams are mid extended Pins must be engaged for this outrigger and stabilizer configuration Both outrigger and stabilizer beams must be extended to mid extend mark NOTE: Lifting personnel with crane in this outrigger configuration is strictly prohibited. Use only fully extended outrigger configuration when lifting personnel. Use this chart only when front outriggers and rear stabilizers are in the intermediate position.
boom/jib load charts 0C Load Ratings - Intermediate Outrigger Spread Boom/Jib A B C D 31 52 4 0 (9,5) (23,0) (,7) (,) (,5) 0C Jib Load Ratings Fixed Jib Telescopic Jib 31 31 55 (9,5) (9,5) (1,) Boom/Jib 9 (1,) 0 0,000 (27 21) (1,) 75,0 ( 3) (3,0) 71 3,700 (17 554) (3,0) 7 33,00 7 27,0 ( 332) ( 293) (4,3) 1 21,900 74 22, 79 22,0 (9 934) ( 270) ( 37) (4,3) (5,2) 4 11,9,5 74,7 7,0 0,9 (5 2) (5 4) (5 774) (5 33) (5 70) (5,2) (,1) 32 7, 2 7,9 70,0 74,2 7,0 (3 33) (3 02) (3 3) (3 733) (3 75) (,1) (7,) 55 5,3 5 5, 71 5, 75 5, (2 9) (2 4) (2 531) (2 53) 79 5, 79 5,4 (2 44) (2 4) (7,) 4 3, 0 3,770 7 3,70 72 3,9 (1 37) (1 7) (1 755) (1 73) 7 4,1 7 3,0 0 4,000 (1 4) (1 9) (1 14) (,7) 39 2,4 55 2, 3 2,70 9 2,7 (1 09) (1 170) (1 211) (1 23) 74 2,900 74 2,470 7 3,2 (1 3) (1 0) (1 ) (,7) (,2) 2 1,5 49 1,90 59 1,70 5 1, (99) (77) (07) () 72 2,000 72 1, 7 2,0 (907) (717) (1 043) (,2) 43 1,0 55 1,0 2 1, () (499) (52) 70 1,3 70 90 74 1,00 (599) (4) (72) 55 (,2) Deduction* 00 0 270 2 (272) (9) (2) (0) (2) 72 1,0 (472) 55 (,2) Deduction** *for stowed fixed jib **for stowed telescopic jib 900 5 0 3 290 () (2) (11) (0) (132) model 0C Meets ANSI B.5 Requirements - Do not operate crane or accessories within ' (3.05m) of live power lines. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
boom/jib range diagram 4C Range Diagram - Fully Extended model 4C FIRST SECTION SECOND SECTION Pins must be disengaged for this outrigger configuration These marks indicate when beams are fully extended GROUND OUTRIGGERS 222.0 REF - 1' " (5,4 m) 24.0 REF - 22' 0" (,71 m) STABILIZERS All outrigger beams must be extended to full extend mark NOTE: Use this chart only when outriggers and stabilizers are fully extended.
boom/jib load charts 4C Load Ratings - Fully Extended Outrigger Spread Boom/Jib A B C D 31 5 0 2 4 (9,5) (17,7) (24,4) (31,1) (37,) 4C Jib Load Ratings 31 (9,5) Boom/Jib 11 (1,) (3,0) (4,) (,1) (7,) 1 0,000 (27 21) 7 4,00 (21 137) 72 39,0 (17 2) 34,0 79,000 ( 513) (11 3) 1 2, 7,000 1 21,000 ( 92) (11 3) (9 5) 49 21,0 71 19,490 7 1,5 1 14,000 (9 752) ( 41) ( 1) ( 0) 34 1,1 5,70 74 14,700 79 13,000 1,0 (7 7) (7 149) ( ) (5 97) (3 33) (1,) (3,0) (4,) (,1) (7,) 0 13,0 70,070 7 11,4 79,0 (5 9) (5 475) (5 ) (3 97) 1 4,000 (1 14) (,7) 53,4,1 73 9,00 7 7,00 (4 731) (4 595) (4 4) (3 53) 79 3, (1 74) (,7) (,2) 47,470 2, 9,0 74 7, (3 42) (3 9) (3 3) (3 2) 77 3,700 (1 7) (,2) 39, 57,7, 72,5 (2 97) (3 02) (3 7) (2 9) 75 3,5 (1 ) (,2) 29 5,1 52 5,3 3 5,4 9 5, (2 327) (2 9) (2 4) (2 477) 73 3,0 (1 542) (,2) 55 (1,) 13 4,0 47 4,0 59 4,290 4,3 (1 23) (1 905) (1 94) (1 99) 71 3,0 (1 474) 55 (1,) 0 (1,3) 42 3,3 5 3,0 4 3,0 (1 1) (1 542) (1 55) 9 3,00 (1 397) 0 (1,3) 5 (19,) 3 2,590 52 2,0 1 2,7 (1 175) (1 21) (1 23) 7 2,9 (1 3) 5 (19,) 70 (21,3) 2 1,990 4 2,00 5 2,0 (903) (943) (92) 2,490 (1 9) 70 (21,3) 75 (22,9) 1 1, 44 1,570 55 1, (71) (7) (7) 4 1,970 (94) 75 (22,9) 0 (24,4) 39 1,1 52 1, (513) (5) 2 1,5 (94) 0 (24,4) 5 (,9) 90 (27,4) 95 (29,0) Deduction* *for stowed fixed jib 34 70 49 00 (3) (33) 0 2 1 0 (4) (9) (2) (4) (54) 0 1,0 (522) 57 (372) 55 5 (2) 5 (,9) 90 (27,4) 95 (29,0) model 4C Meets ANSI B.5 Requirements - Do not operate crane or accessories within ' (3.05m) of live power lines. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
boom/jib range diagram 4C Range Diagram - Intermediate model 4C Mark indicates beams are mid extended Pins must be engaged for this outrigger and stabilizer configuration NOTE: Lifting personnel with crane in this outrigger configuration is strictly prohibited. Use only fully extended outrigger configuration when lifting personnel. OUTRIGGERS & STABILIZERS GROUND.0 REF - 13' 4" (11,22 m) Both outrigger and stabilizer beams must be extended to mid extend mark Use this chart only when front outriggers and rear stabilizers are in the intermediate position.
boom/jib load charts 4C Load Ratings - Intermediate Outrigger Spread Boom/Jib A B C D 31 5 0 2 4 (9,5) (17,7) (24,4) (31,1) (37,) 4C Jib Load Ratings Fixed Jib 31 (9,5) Boom/Jib 13 (1,) 1 0,000 (27 21) (1,) 7 4,00 (21 13) (3,1) 72 39,0 (17 2) (3,1) 34,0 79,000 ( 513) (11 3) (4,) 1 22,5 7 23,390 1 21,000 ( 2) ( ) (9 52) (4,) (,1) 49,070 71,00 7 13,0 1 13,1 (5 475) (5 0) (5 90) (5 90) (,1) (7,) 34 7,0 5 7,990 74, 79,290 1,0 (3 311) (3 24) (3 7) (3 70) (3 7) (7,) 0 5,2 70 5,4 7 5,5 79 5,570 (2 372) (2 9) (2 499) (2 527) 1 4,000 (1 14) (,7) 53 3,0 3, 73 3,7 7 3,770 (1 55) (1 47) (1 7) (1 7) 79 3, (1 74) (,7) (,2) 47 2,0 2 2, 9 2, 74 2,5 (99) (1 00) (1 11) (1 139) 77 2, (1 279) (,2) 39 1, 57 1,0 1,5 72 1, (51) (5) (94) (717) 75 1,90 (57) (,2) 73 1,170 (531) (,2) Deduction* *for stowed fixed jib 0 2 1 0 (4) (9) (2) (4) (54) model 4C Meets ANSI B.5 Requirements - Do not operate crane or accessories within ' (3.05m) of live power lines. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
load chart data 14 Deductions Auxillary Block Load Block Overhaul Ball Hose Reel Swing Around Jib* (Stowed) (23 kg) See manufacturer s nameplate See manufacturer s nameplate (11 kg) See load rating chart Warning Anti-two-block system must be in good operating condition before operating crane. Refer to the owner s manual. Keep at least three wraps of load line on the drum at all times. Area of Operation Full Capacity Work Area Line through the centerline of rotation Allowable Line Pull 0C 1 Part Line 2 Part Line 3 Part Line 4 Part Line 5 Part Line Part Line models 0C, 4C 9,00 1, 27,2 3,3,000 54, (4 119 kg) ( 237 kg) ( kg) (1 474 kg) ( 593 kg) (24 7 kg),000,000,000,000,000 0,000 (4 53 kg) (9 072 kg) (13 0 kg) (1 144 kg) (22 0) (27 21 kg) Allowable Line Pull 4C 1 Part Line 2 Part Line 3 Part Line 4 Part Line 5 Part Line Part Line 7 Part Line 9,00 1, 27,2 3,3,0 54, 0,000 (4 119 kg) ( 237 kg) ( kg) (1 474 kg) ( 593 kg) (24 7 kg) (27 21 kg) 9,0 19,000 2,0 3,000 47,0 57,000 0,000 (4 9 kg) ( 1 kg) ( 927 kg) (17 237 kg) (21 54) ( 55 kg) (27 21 kg) 5/" Rotation Resistant (5.0:1 SF),0 Min Breaking Strength 5/" x IWRC (3.5:1 SF),000 Min Breaking Strength
SM CraneCARE CraneCARE is Manitowoc Boom Trucks complete service and support program. Incorporated into this program are service training, immediate parts availability, professional field service, and technical support and documentation. CraneCARE is available for every one of the thousands of cranes still operating all over the world. That s dedication and devotion that you won t get anywhere else. That s CraneCARE. Technical Support Manitowoc Boom Trucks dealer network and factory personnel are available 24 hours a day, 7 days a week, days a year to answer your technical questions and more. For a worldwide listing of dealer locations, please consult our website at: www.manitowocbt.com. Service Training A certified Manitowoc Boom Trucks service specialist works with you in your training facility or in the field to ensure that you know how to achieve maximum performance, dependability, and years from your cranes. A reputable Manitowoc Boom Trucks Service technician comes to you to provide valuable training to all distributors on the crane s LMI system. Technical Documentation Manitowoc Boom Trucks boast an extensive, easy-tounderstand library of documentation. A complete set of Operator s parts and service manuals are included with each crane. Additional copies are available through your Authorized Manitowoc Boom Trucks Distributor. Parts Availability Genuine Manitowoc Boom Trucks replacement parts may be obtained through your MBT distributor on a regular basis. Hydraulic Test Kit with Case Part No. 499792-9 Small national O-ring kit Pressure gauges Fluke multi-meter Hydraulic flow meters Multi-load grease gun -drawer tool box 17-piece wrench set Field Service Factory-trained service experts are always ready to help maintain your crane s peak performance. For a worldwide listing of dealer locations, please consult our website at: www.manitowocbt.com. models 0C, 4C