data sheet Series Torque Flange Sensor FETURES Complete torque measuring system consisting of: Measuring flange with signal amplifier HF transmitter Conditioner 4 m coaxial cable Contactless signal transmission: via telemetry Torque range: 2 N m to 1, N m High accuracy:.1% to.2% Overload capacity: up to 2% Overload limit: 4% Compact, easy-to-mount design High torsional stiffness Bearingless: maintenance and wear-free Excellent noise immunity and shock resistance Protection class: IP 42 (IP 4 optional) 24 V DC standard power supply Integrated speed sensor and conditioner (option): for rotational speed measurement High temperature capability: up to 12 C (optional) HF Transmitter Coaxial Cable Measuring Flange Conditioner (mounted on heatsink) Model Torque Flange Sensor Kit DESCRIpTION With its compact, bearingless, maintenance-free design, the new Torque Flange Sensor from Magtrol brings many appealing advantages to torque measurement applications. The s high torsional rigidity supports direct mounting on the machine shaft or flange, avoiding the use of couplings on one side. This allows easy integration into a test system, shortens the overall length of the test bench and reduces costs. Based on strain-gauge technology, the Sensor s precise telemetry system enables highly accurate signal transmission. signal amplifier mounted in the measuring flange amplifies the measuring signal, modulates it to high frequency and transmits it inductively (via the HF transmitter) to the conditioner. In the conditioner, the digitized torque signal is transformed into an analog output signal of ± V DC. Rotational speed can be measured and converted to a TTL output signal with the optional speed sensor. The contactless design of the Torque Flange Sensor permits a gap of up to mm (typically 1 to 3 mm) between the rotor antenna and HF transmitter, which makes the signal acquisition insensitive to any axial or radial misalignment. nother advantage of this torque measurement system is its insusceptibility to signal interference due to the fact that, unlike other designs, the antenna does not need to be looped around the measuring flange. dditionally, a protective cover can be mounted close to the Sensor with no effect on the signal. pplictions Torque Flange Sensors measure both static and dynamic torque on stationary and rotating shafts. They are used in general combustion engine, electric motor and gearbox test benches; and can also be mounted inline for active torque monitoring of transmissions, powertrains, wind generators, gas turbines, boat engines, etc. 1 www.magtrol.com
Diagrams BLOCK DIGRM HF TRNSMITTER Switch 4 m Coaxial Cable RG-8 ( Ω) MESURING FLNGE TORQUE CONDITIONER Signal mplifier toothed rim* SPEED SENSOR* Z pulses/ revolution Speed Sensor Connection Cable* Torque Rotational Speed SPEED CONDITIONER* Torque ± VDC (max: ±1 VDC) Power Supply 24 VDC ±1% 3 m Rotational Speed TTL Strain Gauge Bridge for torque measurement * dditional components included with speed measurement option SYSTEM CONFIGURTION Brake HF Transmitter Measuring Flange TORQUE FLNGE SENSOR Motor under test Model 341 Torque Display 4m Coaxial Cable ER116 Connection Cable Conditioner
Specifications Model Ratings Rated Torque * Overload Capacity Maximum Speed * Number of Teeth ** Torsional Stiffness Deformation ngle Model ccuracy N m % of R.T. Class * rpm Z N m/rad 29 2 2%.1% 14, 7 3.82 1 4.3 21 2%.1% 14, 7 7.16 1 4.4 211 1 2%.1% 14, 7 1.2 1.46 212 2 2%.1% 14, 7 2. 1.6 213 2%.1% 8, 91 7.16 1.4 214 1, 2%.1% 8, 91 9. 1.6 21 2, 2%.1% 8, 113 2.86 1 6.4 216, 2%.1% 4, 133 7.16 1 6.4 217 1, 1%.1% 4, 133 1.2 1 7.46 218 2, 2%.2%.2% 1, 283 2.86 1 7.4 219, 18%.2%.2% 1, 283 6.82 1 7.42 22 1, 2%.2%.3% 1, 27 3.37 1 8.17 Sensor Model Weight *** Moment of Inertia kg kg m² lb ft s² 29 2. 2.917 1-3 2.12 1-3 21 2.1 2.996 1-3 2.211 1-3 211 2.2 3.172 1-3 2.341 1-3 212 2.2 3.138 1-3 2.316 1-3 213 3.3 7.83 1-3.78 1-3 214 3.3 7.818 1-3.769 1-3 21.2 1.868 1-2 1.378 1-2 216 9.3 4.747 1-2 3.3 1-2 217 9.3 4.76 1-2 3.472 1-2 218 42.7 9.63 1-1 7.19 1-1 219 43.3 9.724 1-1 7.17 1-1 22 36. 1.7 1 7.89 1-1 * vailable upon request: Torque up to 1, N m.% accuracy High speed versions ** Inductive speed detection available on request. *** dd.8 kg to 2.8 kg to weight, depending on configuration, for electronic devices attached to the sensor (transmitter, receiver, speed conditioner). Dynamic torque peak values for Models 217 and 219 are due to force transmission limit of mounting screws. Moment of Inertia (X axis) Ratings common to all Sensors Torque Measurement Maximum Dynamic Torque Without Damage (Overload Limit) 4% of Rated Torque Speed Measurement Resolution 14-bit Environment Rated Temperature Range +1 C to +8 C Storage Temperature Range -2 C to +8 C Extended Temperature Range (option) -3 C to +12 C Temperature Influence on Zero.1% / C Protection Class IP 42 (optional IP 4) Input and Output Signals Power Supply 24 V DC ±1%, max 3 m Torque Output Signal (rated / max) ± V DC / ±1 V DC Speed Output (option) TTL (pulses per revolution corresponds with number of teeth) Passband Frequency to 1 khz (-3 db)
Sensor Dimensions 29 to 212 3 2 1 2x 4. 3 ir gap 2 mm ir gap 1. mm 1 39 H7 2. 2. 39 H7 1 86 ±. 8x M6 11 18 4 8x M6x1 4. -.2 213 and 214 1 2 2x 4. 8x M1 3 3 8x 1.1 ir gap 2 mm 8x 18 11.±. ir gap 1. mm 3 3 132 7 H7 7 H7 136. 11 2. 18 46 -.2
Sensor Dimensions 21 2 2x 4. 1 ir gap 2 mm 3 3 8x 12.2 8x 2 ir gap 1. mm 164 9 H7 3 3 9 H7 169.4 8x M12 13 ±. 11 6. 18 47 -.2 216 2 ir gap 2mm 2x 4. 1 3 3 8x 14.2 8x 21. ir gap 1.mm 194 11 H7 11 H7 199. 8x M14 11 3 1.±. 11 19 16 -.2
Sensor Dimensions 217 2 ir gap 2 mm 2x 4. 1 3 3 ir gap 1. mm 194 11 H7 11 H7 199.4 8x 16.2 8x 24. 8x M16 1.±. 11 11 3 19 16 6.-.2 218 and 219 4 6 1 3 2 ir gap 3 mm M12x1 ir gap 1. mm 424. 29 H7 29 H7 42 8x 3. 8x 47 16x M3 11 3 7 3 ±. 24 -.2 4
Sensor Dimensions 22 1 6 4 2 ir gap 3 mm 3 2x 4. 16x M 3 32 ±.1 11 M12x1 6 6 4 27H7 268 27H7 4 ir gap 1. mm 2. 24 14-.3
Speed Sensor Dimensions Standard Speed Sensor The standard speed sensor is delivered with Torque Flange Sensors ordered with the speed measurement option. HF Transmitter 9 Connection Cable (to speed conditioner) Speed Sensor 11 1. mm 1 SW17 44 2. 19 44 17 High-temperature Speed Sensor The high-temperature speed sensor is delivered with Torque Flange Sensors ordered with both the speed measurement and extended temperature range options. HF Transmitter High-temperature Speed Sensor Ø 6.4 R. R1. 1 9. mm 2 mm 4 2 O-Ring 4. 2.4 9 4 Ø1 Ø12
Conditioner Dimensions 29 to 217 - Standard 29 to 217 - with speed Option 83 78 14 86 13 22 216 9 121 211 6 9 83 78 2 4x 4. 14 4x 8. 86 1 6 Heatsink 47 Conditioner Conditioner - standard version (1. W) mounted on heatsink for heat dissipation 2 8x 4. 8x 8. 47 Torque Conditioner Speed Conditioner Heatsink Conditioner - speed version (1. W) mounted on heatsink for heat dissipation
Conditioner Dimensions 218, 219 and 22 16 6 13 4x 11 4x 6.6 2 9 1 3 36 Conditioner ( W) mounted inside electronics module 1
Ordering Information OPTIONS ND ORDERING INFORMTION MODEL NUMBER: 2 / 1 MODEL 2 9 2 2 SPEED MEUSUREMENT without (standard) 1 with (option) 2 System Options Model 341 Torque Transducer Display Magtrol offers the new Model 341 Display which supplies power to any Sensor and displays torque, speed and mechanical power. Features include: djustable English, metric and SI torque units Large, easy-to-read vacuum fluorescent display Built-in self-diagnostic tests Overload indication Tare function RS-232 interface Torque and speed outputs Closed-box calibration Includes Magtrol Torque 1. Software Torque 1. Software Magtrol s Torque 1. Software is an easy-to-use Windows executable program, used to automatically collect torque, speed and mechanical power data. The data can be printed, displayed graphically or quickly saved as a Microsoft Excel spreadsheet. Standard features of Magtrol s Torque 1. Software include: peak torque capture, multi-axes graphing, measured parameter vs. time, adjustable sampling rates and polynomial curve fitting. Connection Cables MODEL NUMBER: er 1 - CBLE END 14-Pin Connector 16 (For use with 341 Display or DSP61 Controller) Pigtail Wires 17 CBLE LENGTH m 1 1 m 2 2 m 3 Couplings For the 29 219 Torque Flange Sensors, Magtrol offers double-element high-speed couplings to provide compensation for axial, angular and radial misalignments. Engaged by friction, they are torsionally-stiff and minimize reaction forces. BSD 92 Series couplings are wear and maintenance-free and feature a compact design. Torque Sensor BSD Moduflex 92 Couping 29 to 211 BSD 92-2.8-2 212 BSD 92-4.-2 213 and 214 BSD 92-17-2 21 BSD 92-28-2 216 BSD 92-64-2 217 BSD 92-11-2 218 and 219 BSD 92-64-2 Due to the continual development of our products, we reserve the right to modify specifications without forewarning. www.magtrol.com Magtrol Inc 7 Gardenville Parkway Buffalo, New York 14224 US Phone: +1 716 668 Fax: +1 716 668 87 E-mail: magtrol@magtrol.com Magtrol S Centre technologique Montena 1728 Rossens / Fribourg, Switzerland Phone: +41 ()26 47 3 Fax: +41 ()26 47 31 E-mail: magtrol@magtrol.ch Subsidiaries in: Germany France Great Britain China Worldwide Network of Sales gents -US 6/8