NON-FUSIBLE DISCONNECT SWITCHES

SIRO NON-FUSILE DISONNET SWITHES Ferraz Shawmut SIRO disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-to-date disconnect switch technology available. Designed to suit the UL98 standard, the SIRO gives you a product that makes and breaks power circuits on load. The SIRO switches are tested and approved for use in the most demanding applications, such as Service Entrance. Up to 400, the switches come with visible blade contacts. wide array of handles are available to meet OSH padlocking requirements, NEM configurations, defeater options and NFP 79 requirements. HIGHLIGHTS: Service entrance rated ompact footprints Front operated switches Side operated switches Visible blade contacts up to 400 Line side Shrouding supplied with switch Defeatable pistol handles automatically re-latch when panel door is closed - no tool necessary to reset latch External or direct operation handles Flange operation (For use with side operated switches) PPLITIONS: Service entrance or main panel disconnects up to 600V, 1200 Make and reak power circuit applications on load NFP 79 Solutions Ratings 600 V, 250VD 30, 60, 100, 200, 400, 600, 800, 1000, and 1200 amperes Up to 200k Short ircuit Rating with Fuses pprovals ll SIRO switches meet the requirements of UL98 UL Listed Guide WHT, File E191605 S 22.2 # 4 lass 4652 04, File 703166 IE 947-3 E mark (other IE ratings up to 5000 available on request, please consult us) 11

SIRO FRONT OPERTED NON-FUSILE DISONNET SWITHES SELET SWITH SIRO RNGE: Non-Fusible Disconnect Switches from 30 to 1200 mperes MPERE RTING : 3 POLE : 4 POLE 30 SV30 60 SV60 SV604 100 SV100 SV1004 200 SV200 SV2004 400 SV400 SV4004 ETERNL OPERTION SELET HNDLE NEM TPE 1,3R, 12, 4 4 1, 3R, 12, 4, 4 IE TPE DEFETLE NO NO OLOR Red/ellow HMS HMSR or SELET SHFT SELET HNDLE SHFT LENGTH (inches/mm) 7.9 / 200 12.6 / 320 15.7 / 400 NEM TPE 1,3R, 12 1, 3R, 12 1, 3R,12 1, 3R, 12 IE TPE IP54 IP54 IP54 IP54 DEFETLE ES ES NO NO OLOR Red/ellow Red/ellow SM200-5 SM320-5 SM400-5 OR HDP HDPR HDPND HDPRND or SELET SHFT SELET HNDLE SHFT LENGTH (inches/mm) 4.7/120 7.9/200 12.6/320 15.7/400 19.7/500 NEM TPE 1,3R, 12 1, 3R, 12 1, 3R,12, 4, 4 1, 3R, 12, 4, 4 IE TPE IP54 IP54 DEFETLE ES ES ES ES OLOR Red/ellow Red/ellow SD120-5 SD200-5 SD320-5 SD400-5 SD500-5 OR HGP HGPR HGP4 HGPR4 HGPL HGPRL HGP4L HGPR4L HGPL HGPRL HGP4L HGPR4L HGPL HGPRL HGP4L HGPR4L HGPL HGPRL HGP4L HGPR4L SELET SHFT SHFT LENGTH (inches/mm) 7.9/200 12.6/320 15.7/400 19.7/500 SG200-5 SG320-5 SG400-5 SG500-5 SG200-10 SG320-10 SG400-10 SG500-10 SG200-10 SG320-10 SG400-10 SG500-10 SG200-10 SG320-10 SG400-10 SG500-10 SG200-10 SG320-10 SG400-10 SG500-10 DIRET OPERTION SELET HNDLE OLOR HD1 This function can be achieved using side operated 60-400 Non-Fusible Disconnect Switches with direct handle as on page 14 OPTIONS FOR ETERNL FRONT & DIRET OPERTION Terminal Lugs it (6 lugs per kit - for 3 poles switches) (8 lugs per kit - for 4 poles switches) 3-pole Terminal Shrouds kit (1) (for line or load side) 4-pole Terminal Shrouds kit (1) (for line or load side) 3-pole Terminal Screen (for line or load side) 4-pole Terminal Screen (for line or load side) uxiliary ontacts Holder (3) HD H (1) N/O, 10, 600V snap-on contact block, 600-Q600 3 3 (1) N/, 10, 600V snap-on contact block, 600-Q600 4 4 (1) NO + N side mount contact block, 600-N600 5 (2) NO + N side mount contact blocks, 600-N600 6 NFP 79 solutions (5) Operation of the switch (special handle) HD6 HD8 llows to operate & padlock Padlocking facility on the switch Included s standard the switch when door is open (in the kit HD6) (1) Line side Shrouding supplied as standard with switch (2) s replacement part (two Terminal Screens supplied as standard with switch) (3) HD accommodates up to 4 auxiliary contacts, H accommodates up to 8 auxiliary contacts (4) See NFP 79 requirements and our solutions page L33 (5) HD6 requires use of G type handle (IE: HGP) 12 H 3 4 5 6 HD8 s standard TL200 TL2004 TS200S TS2004S H 3 4 5 6 HD8 s standard TL400 TL4004 TS400S (2) TS4004S (2) H 3 4 5 6 HD8 s standard

SIRO FRONT OPERTED NON-FUSILE DISONNET SWITHES SELET SWITH MPERE RTING : 3 POLE : 4 POLE 400 S400 S4004 600 S600 S6004 800 S800 S8004 1000 S1000 S10004 1200 S1200 S12004 ETERNL OPERTION SELET HNDLE NEM TPE 1,3R, 12, 4, 4 1, 3R, 12, 4, 4 1, 3R,12, 4, 4 1, 3R, 12, 4, 4 IE TPE DEFETLE ES ES NO NO OLOR Red/ellow Red/ellow HHP4S HHPR4S HHP4NDS HHPR4NDS HHP4S HHPR4S HHP4NDS HHPR4NDS HHP4S HHPR4S HHP4NDS HHPR4NDS HHP4S HHPR4S HHP4NDS HHPR4NDS HHP4S HHPR4S HHP4NDS HHPR4NDS SELET SHFT SHFT LENGTH (inches/mm) 7.9 / 200 15.7 / 400 S00-15 SH400-15 S00-15 SH400-15 S00-15 SH400-15 S00-15 SH400-15 S00-15 SH400-15 DIRET OPERTION SELET HNDLE OLOR HD5 HD5 HD5 HD5 HD5 OPTIONS FOR ETERNL FRONT & DIRET OPERTION Terminal Lugs it (6 lugs per kit - for 3 poles switches) (8 lugs per kit - for 4 poles switches) 3-pole Terminal Screen (1) (for line or load side) 4-pole Terminal Screen (1) (for line or load side) uxiliary ontacts Holder (2) (1) N/O, 10, 600V snap-on contact block, 600-Q600 (1) N/, 10, 600V snap-on contact block, 600-Q600 Padlocking facility on the switch TL400 TL4004 TS600S TS6004S HS 3 4 SWLO1 TL600 TL6004 TS600S TS6004S HS 3 4 SWLO1 TL800 TL8004 TS1200S TS12004S HS 3 4 SWLO1 TL800 TL8004 TS1200S TS12004S HS 3 4 SWLO1 TL1200 TL12004 TS1200S TS12004S HS 3 4 SWLO1 (1) Line side Terminal Screen supplied as standard with switch (2) HS accommodates up to 4 auxiliary contacts 13

SIRO SIDE OPERTED NON-FUSILE DISONNET SWITHES SELET SWITH SIRO RNGE: Side operated Non-Fusible Disconnect Switches from 60 to 400 MPERE RTING : 3 POLE : 4 POLE 60 SV60SO SV604SO 100 SV100SO SV1004SO 200 SV200SO SV2004SO 400 SV400SO SV4004SO FLNGE OPERTED HNDLE (Square D type - class 9422) SELET HNDLE NEM TPE IE TPE DEFETLE PDLOLE (1) 1, 3, 3R, 4, 12 4, 4 IP54 ES ES ES ES HF1 (2) HF2 (3) HF1 (2) HF1 (2) HF1 (2) HF2 (3) HF2 (3) HF2 (3) SELET LE LE LENGTH (inches/mm) 36 / 914.4 60 / 1524 120 / 3048 HF36 HF60 HF120 HF36 HF60 HF120 HF36 HF60 HF120 HF36 HF60 HF120 DIRET OPERTION SELET HNDLE PDLOLE OLOR ES HD4 HD4 HD4 HD4 OPTIONS FOR FLNGE & DIRET OPERTION HNDLE Terminal Lugs it (6 lugs per kit - for 3 pole switches) (8 lugs per kit - for 4 pole switches) 3-pole Terminal Shrouds it (4) (for line or load side) 4-pole Terminal Shrouds it (4) (for line or load side) 3-pole Terminal Screen (for line or load side) 4-pole Terminal Screen (for line or load side) uxiliary ontacts (6) (1) NO + N side mount contact block, 600-N600 (2) NO + N side mount contact blocks, 600-N600 5 6 (1) Flange handle includes the flange operator and the coupling mechanism to connect switch and cable together (2) ll external metal parts are sheet steel (3) ll external metal parts are either stainless steel or a chrome-plated non-ferrous die casting (4) Line side Shrouding supplied as standard with switch (5) s replacement part (two Terminal Screens supplied as standard with switch) (6) Two auxiliary contacts maximum Note: Side-external handle and shaft available, consult with factory. TL200 TL2004 TS200S TS2004S 5 5 6 6 TL400 TL4004 TS400S (5) TS4004S (5) 5 6 14

SIRO NON-FUSILE DISONNET SWITHES FROM 30 TO 1200 UL, cul ND S TEHNIL HRTERISTIS FOR FRONT & SIDE OPERTION atalog number SV60/SV604 SV100/SV1004 SV200/SV2004 SV400/SV4004 SV30 SV60SO/SV604SO SV100SO/SV1004SO SV200SO/SV2004SO SV400SO/SV4004SO Rating 30 60 100 200 400 Operating voltage V 600 600 600 600 600 Max horsepower rating/ Max motor FL current Three phase 208 V 5/17.5 15/48.5 25/78.5 50/150 100/286 240 V 7.5/22 15/42 30/80 60/154 125/312 480 V 15/21 30/40 60/77 125/156 250/302 600 V 20/22 50/52 75/77 150/144 350/336 D 125 V (1) 3/25 (1) 3/25 (1) 7.5/58 (1) 15/112 (1) 20/148 D 250 V (1) 5/20 (2) 10/38 (2) 20/72 (2) 40/140 (2) 50/173 Short circuit rating with fuses k 65 200 200 200 200 ranch circuit fuse type or Max fuse rating () 30 60 100 200 400 Dimension 3 pole (front operated switches) H in 4.56 5.87 5.87 8.13 14.31 W in 3.78 6.69 6.69 9.52 11.93 D in 2.59 3.89 3.89 3.42 4.92 Shaft size square (front operated switches) in 0.2 x 0.2 0.4 x 0.4 0.4 x 0.4 0.4 x 0.4 0.4 x 0.4 mm 5 x 5 10 x 10 10 x 10 10 x 10 10 x 10 3-pole switch operating torque (front operation) lb. in. 21 88 88 106 130 Terminal lugs kit (# lugs per kit) Optional (6) Optional (6) Wire range WG (# wire holes per lug) #10-#14 (1) #3-#10 (1) #3-#10 (1) 3/0-#6 (1) 600 kcmil-#2 (2) Wire tightening torque lb. in. 27 58 58 200 500 (1) 2 pole in series (2) 3 pole in series IE 947-3 TEHNIL HRTERISTIS FOR FRONT & SIDE OPERTION atalog number SV60/SV604 SV100/SV1004 SV200/SV2004 SV400/SV4004 SV30 SV60SO/SV604SO SV100SO/SV1004SO SV200SO/SV2004SO SV400SO/SV4004SO Rating 32 63 100 200 400 Rated Insulation voltage Ui (V) V 800 750 750 750 800 Rated impulse voltage (Uimp) 8 kv 8 kv 8 kv 8 kv 8 kv Operation current Ie () 400 V 22 32 63 100 200 400 23 32 63 100 200 400 690 V 22 32 63 100 200 400 23 32 63 100 200 315 Motor Power (kw) 400 V 23 15 30 51 100 220 500 V 23 18.5 40 63 140 220 690 V 23 25 55 90 185 295 Max. peak let through current (gg) k peak 5.5 17.6 17.6 32 40 onnection Minimum u cable section mm 2 6 10 25 50 185 Minimum U busbar section mm 2 15

Non-fusible DISONNET SWITHES from 30 TO 1200 UL, cul ND S TEHNIL HRTERISTIS FOR FRONT & SIDE OPERTION atalog number Rating Operating voltage Max horsepower rating/ Max motor FL current Three phase 208 V 240 V 480 V 600 V D 125 V D 250 V Short circuit rating with fuses ranch circuit fuse type Max fuse rating () Dimension 3 pole (front operated switches) Shaft size square (front operated switches) 3-pole switch operating torque (front operation) Terminal lugs kit (#lugs per kit) Wire range WG (# wire holes per lug) Wire tightening torque (1) 2 pole in series (2) 3 pole in series S400 / S4004 S600 / S6004 S800 / S8004 S1000 / S10004 S1200 / S12004 400 600 800 1000 1200 600 600 600 600 600 125/360 150/415 200/554 200/554 200/554 125/312 200/480 250/602 250/602 250/602 250/302 400/447 500/590 500/590 500/590 350/336 350/336 500/472 500/472 500/472 (1) 20/148 (1) 20/148 (2) 50/173 (2) 50/173 200 200 100 100 100 L L L 400 600 800 1000 1200 12.60 12.60 13 13 13 11.02 11.02 14.64 14.64 14.64 5.51 5.51 5.51 5.51 5.51 0.59 x 0.59 0.59 x 0.59 0.59 x 0.59 0.59 x 0.59 0.59 x 0.59 15 x 15 15 x 15 15 x 15 15 x 15 15 x 15 320 320 320 320 320 Optional (6) Optional (6) Optional (6) Optional (12) Optional (12) 600 kcmil-#2 (2) 600 kcmil-#2 (2) 600 kcmil-#2 (3) 600 kcmil-#2 (2) 600 kcmil-#2 (2) 500 500 500 500 500 IE 947-3 TEHNIL HRTERISTIS FOR FRONT & SIDE OPERTION atalog number Rating Rated Insulation voltage Ui (V) Rated impulse voltage (Uimp) Operation current Ie () 400 V 690 V Motor Power (kw) 400 V 500 V 690 V Max. peak let through current (gg) onnection Minimum u cable section Minimum U busbar section S400 / S4004 S600 / S6004 S800 / S8004 S1000 / S10004 S1200 / S12004 400 600 800 1000 1250 1000 1000 1000 1000 1000 12 kv 12 kv 12 kv 12 kv 12 kv 400 630 800 1000 1200 400 630 800 1000 1000 400 500 630 630 630 200 200 400 400 400 220 355 450 560 560 280 450 560 560 560 185 185 400 400 400 48 48 75 75 75 185 2 x 150 2 x 185 2 x 240 2 x 30 x 5 2 x 40 x 5 2 x 50 x 5 2 x 60 x 5 16

FRONT OPERTED Non-fusible DISONNET SWITHES DIMENSIONS (dual dimensions: in/mm) SIRO V 30 SV30 1 1 SIRO V 60-100 SV60 SV604 SV100 SV1004 0.40 10.3 1.14 29 1 1 5 126.5 RTING NUMER H H1 H3 1 1 OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm V 30 3 P 3.78 96 4.56 116 2.59 66 1.47 37.5 0.59 15 3.13 79.5 1 25.5 1.12 28.5 V 60 3 P 6.69 170 5.87 149 3.89 99 1.5 38 2.75 69.5 5.25 133.5 2.63 66.5 0.95 24.5 4 P 8.19 208 3 P 6.69 170 V 100 5.87 149 3.89 99 1.5 38 2.75 69.5 5.25 133.5 2.63 66.5 0.95 24.5 4 P 8.19 208 17

FRONT OPERTED Non-fusible DISONNET SWITHES DIMENSIONS (dual dimensions: in/mm) SIRO V 200 SV200 SV2004.40 10.3 1.14 29 1 M 8 1 5 126.5 6.53 166 H3 SIRO V 400 SV400 SV4004.40 10.3 1.14 29 1 M 10 1 5 126.5 6.93 176 H3 RTING NUMER H H1 H3 1 1 OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm V 200 3 P 9.52 242 3.68 93.5 8.13 206.5 3.42 87 6.87 174.5 4.39 111.5 2.44 62 4 P 11.97 304 4.66 118.5 7.5 190.5 3.74 95 0.95 24.5 V 400 3 P 11.93 303 14.31 363.5 4.92 125 7.04 179 6.59 167.5 2.84 72 2.04 52 8.82 224 4.41 112 1.06 27 4 P 14.76 375 18

FRONT OPERTED Non-fusible DISONNET SWITHES DIMENSIONS (dual dimensions: in/mm) SIRO 400-600 S400 S4004 S600 S6004 1 Ø 0.5 Ø 13 H 1 2 H H1 3.15 80 SIRO 800-1000-1200 S800 S8004 S1000 S10004 S1200 S12004 0.78 20 0.78 20 1.57 40 Ø 0.43 Ø 11 1 H 1 2 11.42 290 2 8.48 215.5 1 8.85 225 H 1 2 H1 4.72 120 RTING NUMER H H1 1 1 2 OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm 400 3 P 11.02 280 10.04 255 5 127.5 12.60 320 5.51 140 9.05 230 5.43 138 8.66 220 6.88 175 2.34 59.5 1.10 600 4 P 14.17 360 13.19 335 6.59 167.5 28 1.85 47 800 3 P 14.64 372 13.66 347 6.83 173.5 1000 13 330 5.51 140 9.05 230 5.43 138 6.88 175 2.34 59.5 1.10 1200 4 P 19.37 492 18.38 467 9.19 233.5 28 1.85 47 19

SIDE OPERTED Non-fusible DISONNET SWITHES DIMENSIONS (dual dimensions: in/mm) SIRO V 60-100 SV60SO SV604SO SV100SO SV1004SO 1.40 10.3 1.14 29 1 1 5 126.5 SIRO V 200 SV200SO SV2004SO 1.40 10.3 1.14 29 1 M 8 1 5 126.5 6.53 166 H3 RTING NUMER 1 H3 1 1 OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm V 60 V 100 V 200 3 P 5.45 138.5 5.86 149 3.89 99 1.57 40 1.49 38 2.32 59 5.25 133.5 2.62 66.5 0.96 24.5 4 P 6.95 176.5 3 P 7.09 180 5.86 149 3.89 99 1.47 37.5 1.49 38 2.32 59 5.25 133.5 2.62 66.5 0.96 24.5 4 P 9.13 232 3 P 9.47 240.5 8.13 206.5 3.42 87 1.47 37.5 6.87 174.5 4.39 111.5 2.44 62 4.47 113.5 7.5 190.5 3.74 95 0.96 24.5 4 P 11.9 302.5 20

SIDE OPERTED Non-fusible DISONNET SWITHES DIMENSIONS (dual dimensions: in/mm) SIRO V 400 SV400SO SV4004SO 1.49 38 0.40 10.3 1.14 29 1 M 10 1 5 126.5 6.93 176 H3 RTING NUMER H3 1 1 OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm V 400 3 P 10.9 277 14.31 363.5 4.92 125 7.04 179 6.59 167.5 2.84 72 1.89 48 8.82 224 4.41 112 1.06 27 4 P 13.74 349 21

Non-fusible DISONNET SWITHES HNDLES FOR ETERNL FRONT OPERTION SELETOR HNDLE TPE M 2.44 62 0.49 12.4 5 8" 16 90 -ON 1 16" ø 2.2 PISTOL HNDLE TPE D 2.58 65.5 1.83 46.5 1 1 4" ø 31 DOOR DRILLING 1 8" 2 ø 4.5 2.44 62 0.69 17.5 1.5 38 0.31 8 -OFF 7 8" ø 23 2.48 63 -ON 90 2" 50 OFF PISTOL HNDLE TPE G PISTOL HNDLE TPE H 2.87 73 2.75 70 1 8" 4 ø 4.5 DOOR DRILLING 2" 50 3.15 80 DOOR DRILLING 50 2" 2.78 70.5 G1 4.98 126.5 2" 50 1 1 4" ø 31 -ON o-off 90 7.48 190 4.5 1 8" 50 2" 31 1 1 4" G2 3.93 100 PLTE TO DOOR DISTNE WITH SHFT ETENSION (in/mm) MINIMUM DISTNE (in/mm) h h minimum dimension SIRO V 30 SIRO V 60-100 SIRO V 200 SIRO 400-600 SIRO 800-1000-1200 HNDLE TPE M In mm HNDLE TPE D In mm HNDLE TPE G 4.14 105 4.53 115 3.74 95 - - - - - - 4.73 120 - - - - - - 4.33 110 - - - - - - - - 8.35 212 - - - - - - 8.35 212 In mm PISTOL HNDLE TPE D PISTOL HNDLE TPE G 0.74 19 ±2 1.02 26 ±4 door door HNDLE TPE H In mm SHFT TRIMMING LENGTH (=DIMENSION L) SELETOR HNDLE TPE M SV30 SV30 SV30 0.47 12 ±2 door L L = -2 L = -51 min. L L = -2.5 L = -63 0.39 10 min. L L = -1.45 L = -37 0.39 10 22

SOOME Non-fusible DISONNET SWITHES PISTOL HNDLE TPE G PISTOL HNDLE TPE G SV60 SV6004 SV100 SV1004 SV200 SV2004 1.18 min. 30 L L = -1.18 L = -30 SV400 SV4004 min. 1.18 30 L L = -1.18 L = -30 PISTOL HNDLE TPE H 0.87 min. 22 1.2 max. 30.5 0.87 min. 22 1.2 max. 30.5 S400 S4004 S600 S6004 S800 S8004 S1000 S10004 S1200 S12004 L = -0.86 L = -22 L HNDLES FOR DIRET FRONT OPERTION PISTOL HNDLE TPE P HD1 3.86 98 PISTOL HNDLE TPE H HD5 2.36 60 7.48 190 3.35 85 23

Non-fusible DISONNET SWITHES HNDLES FOR DIRET SIDE OPERTION HNDLE TPE F HD4 R 0.96 24.5 0.70 18 5.59 142 0.84 21.5 1.29 33 0.94 24 0.12 3 HNDLE FOR FLNGE OPERTION SQURE D TPE FLNGE HNDLE - LSS 9422 (1 & 2) 24

TERMINL LUGS tl200 For use with SIRO V 200 7 16 ø 11.6 Non-fusible DISONNET SWITHES tl400 For use with SIRO 400 15 16 ø 23.8 17 32 ø 13.5 25 2 38.8 8 28.6 tl600 and tl1200 3 8 ø 10.2 tl800 7 16 ø 11 9 16 2 2 63 2 38 3 32 2.4 9 1 16 39.7 2 38.1 3 3 16 81 1 wire 3/0 - #6 1 wire 600 MM-2 TL600: For use with SIRO 400 & 600 (1 lug per terminal) TL1200: For use with SIRO 800, 1000 & 1200 (2 lugs per terminal) For use with SIRO 800-1000 3 8 80 9 3 16 90.5 7 2 8 73 3 76 2 wires 600 MM-2 3 wires 600 MM-2 25