High Purity PVDF/PP Valves and Flowmeters

High Purity PVDF/PP Valves and Flowmeters Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS

Quality is important for us Your reliable partner Since 1988, GEMÜ has been an Industry leader in the production of high purity valves, actuators and control systems. Our dedication to quality has earned us many loyal customers in the semiconductor industry. Our High Purity products are developed and produced specifically for use in process equipment, ultra Source: Infineon pure water and chemical manufacturing and distribution systems, for microchip production. They are produced today under the strictest cleanroom conditions at our manufacturing site in Switzerland. 2

We develop, produce and supply: CleanStar PFA-HP valves, control systems and accessories FlareStar PFA-HP fittings and accessories The pureplus valve range is the result of close cooperation with designers, equipment manufacturers and end users / chip manufacturers in the semiconductor industry. HydraLine PFA-HP pressure measurement devices and transmitters, specifically designed for ultra high purity chemicals TubeStar PFA-HP tubing pureplus A product range including PVDF-HP and PP-HP diaphragm valves as well as PVDF-HP flowmeters We offer a complete High Purity PFA, PVDF and PP range of components for critical fluid management and control, that sets new standards. pureplus, the PVDF-HP and PP-HP valve range, provides advanced proven technical design to meet the challenges of your requirements. 3

Product overview 1 Technical information 2 Diaphragm valves 6 Nominal size 7 PVDF-HP valves 3 GEMÜ 617 manually operated 8 9 GEMÜ 677 manually operated 10 13 GEMÜ 610 pneumatically operated 14 15 GEMÜ 600 pneumatically operated 16 17 GEMÜ 690 pneumatically operated 18 21 GEMÜ 677 manually operated, T-valve 22 29 GEMÜ 690 pneumatically operated, T-valve 30 33 PP-HP valves 4 Flowmeters GEMÜ 677 manually operated 34 35 GEMÜ 690 pneumatically operated 36 39 GEMÜ 883, 833, 834 / PVDF float, O-Ring FPM 40 41 873, 823, 824 with/without magnet 4 Contents

5 Accessories GEMÜ 1041 Mounting plates for GEMÜ 600, 677, 690 42 GEMÜ 1300 Optical position indicator for GEMÜ 690 42 GEMÜ 1114 Stroke limiter for GEMÜ 690 42 GEMÜ FLAD Flare-Adapter, for transition from PVDF-HP 43 to PFA tube GEMÜ 1230/1201 Electrical position indicators 43 with microswitches for GEMÜ 600, 610, 690 GEMÜ 1231/1211 Electrical position indicators ATEX 44 with 2-wire Namur proximity switches for GEMÜ 600, 610, 690 GEMÜ 1232/1214 Electrical position indicators 45 with 3-wire proximity switches for GEMÜ 600, 610, 690 GEMÜ 1234 Electrical position indicator, 46 intelligent programming for GEMÜ 610 GEMÜ 1235 Electrical position indicator, 46 intelligent programming for GEMÜ 600, 610, 690 GEMÜ 1251/1252 Limit switches for GEMÜ flowmeters 48 (DN 25 50) GEMÜ 1256/1257 Limit switches for GEMÜ flowmeters 48 (DN 15 + 20) GEMÜ 1270-1273 Instrument sensor, 49 continuous measurement, for GEMÜ 833, 883 Contents 5

1 Diaphragm valves Technical information High Purity diaphragm valves have been specifically developed for ultra high purity water treatment and distribution plants as well as for process equipment for microchip production. All valves can be welded using common IR butt-welding machines. In addition, all PVDF-HP diaphragm valves up to d 63/DN 50 can also be welded with WNF/BCF welding machines. Product features Minimal contamination Use of High Purity materials Minimal dead legs Compact design Optional mounting position and flow direction Good Cv values Low maintenance actuators, long service life Extensive range of accessories Manufactured in class 100 clean room Flow characteristics Information about the control behavior of diaphragm valves is shown in the flow characteristic curve: 100 90 80 70 60 50 40 Flow rate in % 30 20 10 Pressure differential 1.0 bar 0 0 5 15 25 35 45 55 65 75 85 95 Valve stroke in % There is a nearly linear flow increase in the range from 5 65% valve stroke. Only a slight flow increase is achieved above 80% stroke. Application limits The maximum working temperature for diaphragm valves and flowmeters is 90 C/194 F. Pressure/Temperature diagram Pressure rating PN 6: Working pressure Pressure rating PN 10: Working pressure Temperature Temperature 6 Technical information

Nominal size 1 Flow capability in relation to nominal size Flow/Pressure differential curve Flow/Pressure differential curve (DN 15 40) (DN 50 100) 120 100 DN 40, Cv 29.2 1000 900 800 DN 100, Cv 221 80 60 DN 32, Cv 21.0 700 600 500 DN 80, Cv 140 Flow (gal/min) 40 20 0 0 2 4 6 8 10 12 14 DN 25, Cv 12.3 DN 20, Cv 9.6 DN 15, Cv 6.5 Flow (gal/min) 400 300 200 DN 65, Cv 91 DN 50, Cv 54 100 0 0 2 4 6 8 10 12 14 Pressure differential (psi) Pressure differential (psi) Coordination of sizes (mm) Conversion factor Nominal diam. (DN) Pipe (d) Size Kv (l/min) = Cv (gal/min) x 14.28 mm inch mm inch inch Cv (gal/min) = Kv (l/min) x 0.07 15 0.59 20 0.79 ½ 20 0.79 25 0.98 ¾ 25 0.98 32 1.26 1 32 1.26 40 1.57 1¼ 40 1.57 50 1.97 1½ 50 1.97 63 2.48 2 Spare parts 65 2.56 75 2.95 2 ½ Spare parts such as complete 80 3.15 90 3.54 3 actuators and diaphragms are 100 3.94 110 4.33 4 available upon request. Technical information 7

2 617 PVDF-HP valves 2/2 way diaphragm valve, manually operated, d 20 / DN 15 PVDF-HP / diaphragm material PTFE d DN PN Weight Cv Order code Size mm psi lbs gpm inch Valve body with butt weld spigots (BCF) White bonnet 20 15 90 0.57 4 617 15D28205A0 M HPW 1/2 Black bonnet 20 15 90 0.57 4 617 15D28205A0 M HP 1/2 Valve body with union ends and IR inserts White bonnet 20 15 90 0.57 4 617 15D78205A0 M HPW 1/2 Black bonnet 20 15 90 0.57 4 617 15D78205A0 M HP 1/2 Product features Stable, integrated mounting plate Max. working pressure: 90 psi (6 bar) Optical position indicator as standard Bonnet and handwheel in PVDF Also available with union ends for easy installation and removal. Dimensions Valve body with butt weld spigots (BCF) (inch) 8 PVDF-HP valves

617 2 Dimensions Valve bonnet and body mounting (inch) * * * Mounting holes 2 x M5, hole distance 1.38" * Mounting dimensions for use with mounting plate GEMÜ 1041 Dimensions Valve body with union ends and IR inserts (inch) PVDF-HP valves Inhalt 9

2 677 2/2 way diaphragm valve, manually operated d 20 110 / DN 15 100 PVDF-HP / diaphragm material PTFE d DN PN Weight Cv Order code Size mm psi lbs gpm inch White bonnet 20 15 150 1.54 6.6 677 15D28205E0 HPW ½ 25 20 150 1.54 9.6 677 20D28205E0 HPW ¾ 32 25 150 1.54 12.3 677 25D28205E0 HPW 1 40 32 150 3.08 21.0 677 32D28205E0 HPW 1¼ 50 40 150 3.08 29.2 677 40D28205E0 HPW 1½ 63 50 150 5.28 53.8 677 50D28205E0 HPW 2 Black bonnet 20 15 150 1.54 6.6 677 15D28205E0 HP ½ 25 20 150 1.54 9.6 677 20D28205E0 HP ¾ 32 25 150 1.54 12.3 677 25D28205E0 HP 1 40 32 150 3.08 21.0 677 32D28205E0 HP 1¼ 50 40 150 3.08 29.2 677 40D28205E0 HP 1½ 63 50 150 5.28 53.8 677 50D28205E0 HP 2 75 65 150 16.06 91.0 677 65D2020520 HP 2½ 90 80 150 16.06 140.0 677 80D2020520 HP 3 110 100 150 19.80 220.5 677 100D2020520 HP 4 Product features Optical position indicator as standard Lockable handwheel clamp option Electrical position indication (open) optional 10 PVDF-HP valves

677 2 Handwheel with locking device d DN PN Weight Cv Order code Size mm psi lbs gpm inch White bonnet 20 15 150 1.54 6.6 677 15D28205EL HPW ½ 25 20 150 1.54 9.6 677 20D28205EL HPW ¾ 32 25 150 1.54 12.3 677 25D28205EL HPW 1 40 32 150 3.08 21.0 677 32D28205EL HPW 1¼ 50 40 150 3.08 29.2 677 40D28205EL HPW 1½ 63 50 150 5.28 53.8 677 50D28205EL HPW 2 Black bonnet 20 15 150 0.7 6.6 677 15D28205EL HP ½ 25 20 150 0.7 9.6 677 20D28205EL HP ¾ 32 25 150 0.7 12.3 677 25D28205EL HP 1 40 32 150 1.4 21.0 677 32D28205EL HP 1¼ 50 40 150 1.4 29.2 677 40D28205EL HP 1½ 63 50 150 2.4 53.8 677 50D28205EL HP 2 75 65 150 7.3 91.0 677 65D202052L HP 2½ 90 80 150 7.3 140.0 677 80D202052L HP 3 110 100 150 9.0 220.5 677 100D202052L HP 4 PVDF-HP valves 11

2 677 Dimensions Bonnet (inch) DN Ø B A A1 15 25 3.54 2.80 0.55 32 40 4.49 3.50 0.31 50 5.51 4.21 0.35 65 80 8.43 5.59 1.06 100 8.43 7.28 1.06 Dimensions Valve body DN 15 50 (inch) DN L H H1 Ø d c c1 s 15 6.06 1.97 1.02 0.79 1.10 1.46 0.07 20 6.06 1.97 1.02 0.98 1.10 1.46 0.07 25 6.06 1.97 1.02 1.26 1.10 1.46 0.09 32 7.64 2.91 1.57 1.57 1.46 1.81 0.09 40 7.64 2.91 1.57 1.97 1.46 1.81 0.12 50 8.82 3.23 1.57 2.48 1.46 1.81 0.12 Dimensions Valve body DN 65 100 (inch) DN L H H1 Ø d c s 65 11.18 4.61 2.17 2.95 1.69 0.14 80 11.81 4.61 2.17 3.54 2.01 0.17 100 13.39 5.51 2.56 4.33 2.32 0.21 12 PVDF-HP valves

677 2 Dimensions Body mounting DN 15 80 (inch) DN M f 15 M 6 0.98 20 M 6 0.98 25 M 6 0.98 32 M 8 1.75 40 M 8 1.75 50 M 8 1.75 65 M 12 3.94 80 M 12 3.94 Dimensions Body mounting DN 100 (inch) DN M f 100 M 10 4.72/2.36 PVDF-HP valves 13

2 610 2/2 way diaphragm valve, pneumatically operated d 20 / DN 15 PVDF-HP / diaphragm material PTFE d DN PN Weight Cv Order code Size mm psi lbs gpm inch Valve body with butt weld spigots (BCF) White actuator 20 15 90 0.64 4 610 15D28205A1 M HPW ½ Black actuator 20 15 90 0.64 4 610 15D2820521 M HP ½ Valve body with union ends and IR inserts White actuator 20 15 90 0.64 4 610 15D78205A1 M HPW ½ Black actuator 20 15 90 0.64 4 610 15D7820521 M HP ½ Technical data is valid for control function 1 (normally closed) Control pressure: 75-105 psi (5 7 bar), max. working pressure: 90 psi (6 bar) Control function 2 (normally open) Product features Stable, integrated mounting plate Optical position indicator as standard Stroke limiter and electrical position indicator available as accessories Also available with union ends for easy installation and removal and 3 (double acting) upon request Dimensions Valve body with butt weld spigots (BCF) (inch) 14 PVDF-HP valves

610 2 Dimensions Actuator and body mounting (inch) Mounting holes 2 x M5, hole distance 1.38" * Mounting dimensions for use with mounting plate GEMÜ 1041 Dimensions Valve body with union ends and IR inserts (inch) PVDF-HP valves 15

2 600 2/2 way diaphragm valve, pneumatically operated d 20 63 / DN 15 50 PVDF-HP / diaphragm material PTFE Product features Compact design Low maintenance piston actuator Stroke limiter, optical position indicator, minimum flow regulation and manual override as standard Connection for pilot valves acc. to Namur Control connection in-line with piping, thus installable in very restricted spaces d DN PN Weight Cv Order code Size mm psi lbs gpm inch 20 15 150 3.96 6.60 600 15D28205E1 HP ½ 25 20 150 3.96 9.60 600 20D28205E1 HP ¾ 32 25 150 3.96 12.30 600 25D28205E1 HP 1 40 32 150 8.80 21.00 600 32D28205E1 HP 1¼ 50 40 150 8.80 29.20 600 40D28205E1 HP 1½ 63 50 150 16.28 53.80 600 50D28205E1 HP 2 Technical data is valid for control function 1 (normally closed) Control function 2 (normally open) and 3 (double acting) upon request Control pressure: 60-90 psi (4 6 bar) max. working pressure: 90 psi (6 bar) 16 PVDF-HP valves

600 2 Dimensions Actuator (inch) DN Ø B B1 A A1 A2 15 25 3.94 0.43 5.55 2.87 0.94 32 40 4.92 0.35 7.56 3.66 2.56 50 5.91 0.31 9.06 4.33 2.56 Dimensions Valve body DN 15 50 (inch) DN L H H1 Ø d c c1 s 15 6.06 1.97 1.02 0.79 1.10 1.42 0.07 20 6.06 1.97 1.02 0.98 1.10 1.42 0.07 25 6.06 1.97 1.02 1.26 1.10 1.42 0.09 32 7.64 2.91 1.57 1.57 1.46 1.81 0.09 40 7.64 2.91 1.57 1.97 1.46 1.81 0.12 50 8.82 3.23 1.57 2.48 1.46 1.81 0.12 PVDF-HP valves 17

2 690 2/2 way diaphragm valve, pneumatically operated d 20 110 / DN 15 100 PVDF-HP / diaphragm material PTFE Product features Optical position indicator as standard Electrical position indication optional d DN PN Weight Cv Order code Size mm psi lbs gpm inch 20 15 150 3.96 6.6 690 15D28205E1 HP ½ 25 20 150 3.96 9.6 690 20D28205E1 HP ¾ 32 25 150 3.96 12.3 690 25D28205E1 HP 1 40 32 150 8.80 21.0 690 32D28205E1 HP 1¼ 50 40 150 8.80 29.2 690 40D28205E1 HP 1½ 63 50 150 16.25 53.8 690 50D28205E1 HP 2 75 65 150 35.86 91.0 690 65D2020521 HP 2½ 90 80 150 35.86 140.0 690 80D2020521 HP 3 110 100 150 53.90 220.5 690 100D2020521 HP 4 Technical data is valid for control function 1 (normally closed) Control function 2 (normally open) Max. working pressure: 90 psi (6 bar) (DN 15 80), 60 psi (4 bar) (DN 100) and 3 (double acting) upon request 18 PVDF-HP valves

690 2 Dimensions Actuator control function 1 (NC) (inch) DN Ø B A A1 15 25 4.92 5.16 1.85 32 40 6.10 6.97 2.95 50 8.27 8.46 3.54 65 80 10.24 11.02 5.00 100 10.24 12.09 5.87 Dimensions Actuator control function 2 + 3 (NO and DA) (inch) DN Ø B A A1 A2 15 25 4.92 3.86 1.85 1.06 32 40 6.10 5.31 2.95 1.06 50 8.27 6.46 3.54 1.14 65 80 10.24 8.90 5.00 1.61 100 10.24 10.35 5.79 1.81 Control pressure [psi] 90 75 60 45 30 15 15 30 45 60 75 90 105 120 135 150 Working pressure [psi] DN 65 DN 100 DN 32, 40 DN 50 DN 15, 20, 25 Measured values correspond to control function 2 (normally open). For control function 3 (double acting) control pressure values are approx. 15 psi (1 bar) lower. PVDF-HP valves 19

2 690 Dimensions Valve body DN 15 50 (inch) DN L H H1 Ø d c c1 s 15 6.06 1.97 0.94 0.79 1.10 1.46 0.07 20 6.06 1.97 0.94 0.98 1.10 1.46 0.07 25 6.06 1.97 0.94 1.26 1.10 1.46 0.09 32 7.64 2.91 1.57 1.57 1.46 1.81 0.09 40 7.64 2.91 1.57 1.97 1.46 1.81 0.12 50 8.82 3.23 1.57 2.48 1.46 1.81 0.12 Dimensions Valve body DN 65 100 (inch) DN L H H1 Ø d c s 65 11.22 4.61 2.17 2.95 1.69 0.14 80 11.81 4.61 2.17 3.54 2.01 0.17 100 13.39 5.51 2.56 4.33 2.32 0.21 20 PVDF-HP valves

690 2 Dimensions Body mounting DN 15 80 (inch) DN M f 15 M 6 0.98 20 M 6 0.98 25 M 6 0.98 32 M 8 1.75 40 M 8 1.75 50 M 8 1.75 65 M 12 3.94 80 M 12 3.94 Dimensions Body mounting DN 100 (inch) DN M f 100 M 10 4.72 / 2.36 PVDF-HP valves 21

2 677 2/2 way T-diaphragm valve, manually operated d 20 110 / DN 15 100 PVDF-HP / diaphragm material PTFE d2 d1** DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch White bonnet 20-20 15 15 150 5.60 677 15T28205E0 1528 HPW ½ - ½ 25-20 20 15 150 5.74 677 15T28205E0 2028 HPW ¾ - ½ 25-25 20 20 150 7.98 677 20T28205E0 2028 HPW ¾ - ¾ 32-20 25 15 150 5.81 677 15T28205E0 2528 HPW 1 - ½ 32-25 25 20 150 8.19 677 20T28205E0 2528 HPW 1 - ¾ 32-32 25 25 150 10.36 677 25T28205E0 2528 HPW 1-1 40-20 32 15 150 5.95 677 15T28205E0 3228 HPW 1¼ - ½ 40-32 32 25 150 10.71 677 25T28205E0 3228 HPW 1¼ - 1 40-40 32 32 150 26.96 677 32T28205E0 3228 HPW 1¼ - 1¼ 50-20 40 15 150 6.09 677 15T28205E0 4028 HPW 1½ - ½ 50-25 40 20 150 8.54 677 20T28205E0 4028 HPW 1½ - ¾ 50-32 40 25 150 10.50 677 25T28205E0 4028 HPW 1½ - 1 50-50 40 40 150 35.01 677 40T28205E0 4028 HPW 1½ - 1½ 63-20 50 15 150 6.51 677 15T28205E0 5028 HPW 2 - ½ 63-25 50 20 150 9.31 677 20T28205E0 5028 HPW 2 - ¾ 63-32 50 25 150 10.99 677 25T28205E0 5028 HPW 2-1 63-40 50 32 150 27.80 677 32T28205E0 5028 HPW 2-1¼ 63-50 50 40 150 35.36 677 40T28205E0 5028 HPW 2-1½ 63-63 50 50 150 37.82 677 50T28205E0 5028 HPW 2-2 Product features Optical position indicator as standard Lockable handwheel clamp option Injection molded T-body Minimized dead leg Saves welding time/cost 75-40 65 32 150 23.81 677 32T28205E0 6520 HPW 2½ - 1¼ 75-63 65 50 150 38.52 677 50T28205E0 6520 HPW 2½ - 2 90-20 80 15 150 6.09 677 15T28205E0 8020 HPW 3 - ½ 90-25 80 20 150 9.24 677 20T28205E0 8020 HPW 3 - ¾ 90-32 80 25 150 10.15 677 25T28205E0 8020 HPW 3-1 90-40 80 32 150 22.90 677 32T28205E0 8020 HPW 3-1¼ 90-50 80 40 150 30.88 677 40T28205E0 8020 HPW 3-1½ 90-63 80 50 150 38.66 677 50T28205E0 8020 HPW 3-2 110-20 100 15 150 6.09 677 15T28205E0 10020 HPW* 4 - ½ 110-25 100 20 150 9.24 677 20T28205E0 10020 HPW* 4 - ¾ 110-32 100 25 150 10.15 677 25T28205E0 10020 HPW* 4-1 110-40 100 32 150 22.90 677 32T28205E0 10020 HPW 4-1¼ 110-50 100 40 150 30.88 677 40T28205E0 10020 HPW 4-1½ 110-63 100 50 150 38.66 677 50T28205E0 10020 HPW 4-2 22 PVDF-HP valves

677 2 Handwheel with locking device d2 d1** DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch White bonnet 20-20 15 15 150 5.60 677 15T28205EL 1528 HPW ½ - ½ 25-20 20 15 150 5.74 677 15T28205EL 2028 HPW ¾ - ½ 25-25 20 20 150 7.98 677 20T28205EL 2028 HPW ¾ - ¾ 32-20 25 15 150 5.81 677 15T28205EL 2528 HPW 1 - ½ 32-25 25 20 150 8.19 677 20T28205EL 2528 HPW 1 - ¾ 32-32 25 25 150 10.36 677 25T28205EL 2528 HPW 1-1 40-20 32 15 150 5.95 677 15T28205EL 3228 HPW 1¼ - ½ 40-32 32 25 150 10.71 677 25T28205EL 3228 HPW 1¼ - 1 40-40 32 32 150 26.96 677 32T28205EL 3228 HPW 1¼ - 1¼ 50-20 40 15 150 6.09 677 15T28205EL 4028 HPW 1½ - ½ 50-25 40 20 150 8.54 677 20T28205EL 4028 HPW 1½ - ¾ 50-32 40 25 150 10.50 677 25T28205EL 4028 HPW 1½ - 1 50-50 40 40 150 35.01 677 40T28205EL 4028 HPW 1½ - 1½ 63-20 50 15 150 6.51 677 15T28205EL 5028 HPW 2 - ½ 63-25 50 20 150 9.31 677 20T28205EL 5028 HPW 2 - ¾ 63-32 50 25 150 10.99 677 25T28205EL 5028 HPW 2-1 63-40 50 32 150 27.80 677 32T28205EL 5028 HPW 2-1¼ 63-50 50 40 150 35.36 677 40T28205EL 5028 HPW 2-1½ 63-63 50 50 150 37.82 677 50T28205EL 5028 HPW 2-2 75-40 65 32 150 23.81 677 32T28205EL 6520 HPW 2½ - 1¼ 75-63 65 50 150 38.52 677 50T28205EL 6520 HPW 2½ - 2 90-20 80 15 150 6.09 677 15T28205EL 8020 HPW 3 - ½ 90-25 80 20 150 9.24 677 20T28205EL 8020 HPW 3 - ¾ 90-32 80 25 150 10.15 677 25T28205EL 8020 HPW 3-1 90-40 80 32 150 22.90 677 32T28205EL 8020 HPW 3-1¼ 90-50 80 40 150 30.88 677 40T28205EL 8020 HPW 3-1½ 90-63 80 50 150 38.66 677 50T28205EL 8020 HPW 3-2 110-20 100 15 150 6.09 677 15T28205EL 10020 HPW* 4 - ½ 110-25 100 20 150 9.24 677 20T28205EL 10020 HPW* 4 - ¾ ** d1 = branch d2 = main pipe 110-32 100 25 150 10.15 677 25T28205EL 10020 HPW* 4-1 110-40 100 32 150 22.90 677 32T28205EL 10020 HPW 4-1¼ 110-50 100 40 150 30.88 677 40T28205EL 10020 HPW 4-1½ * Available on request. 110-63 100 50 150 38.66 677 50T28205EL 10020 HPW 4-2 PVDF-HP valves 23

2 677 2/2 way T-diaphragm valve, manually operated d 20 110 / DN 15 100 PVDF-HP / diaphragm material PTFE d2 d1** DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch Black bonnet 20-20 15 15 150 5.60 677 15T28205E0 1528 HP ½ - ½ 25-20 20 15 150 5.74 677 15T28205E0 2028 HP ¾ - ½ 25-25 20 20 150 7.98 677 20T28205E0 2028 HP ¾ - ¾ 32-20 25 15 150 5.81 677 15T28205E0 2528 HP 1 - ½ 32-25 25 20 150 8.19 677 20T28205E0 2528 HP 1 - ¾ 32-32 25 25 150 10.36 677 25T28205E0 2528 HP 1-1 40-20 32 15 150 5.95 677 15T28205E0 3228 HP 1¼ - ½ 40-32 32 25 150 10.71 677 25T28205E0 3228 HP 1¼ - 1 40-40 32 32 150 26.96 677 32T28205E0 3228 HP 1¼ - 1¼ 50-20 40 15 150 6.09 677 15T28205E0 4028 HP 1½ - ½ 50-25 40 20 150 8.54 677 20T28205E0 4028 HP 1½ - ¾ 50-32 40 25 150 10.50 677 25T28205E0 4028 HP 1½ - 1 50-50 40 40 150 35.01 677 40T28205E0 4028 HP 1½ - 1½ 63-20 50 15 150 6.51 677 15T28205E0 5028 HP 2 - ½ 63-25 50 20 150 9.31 677 20T28205E0 5028 HP 2 - ¾ 63-32 50 25 150 10.99 677 25T28205E0 5028 HP 2-1 63-40 50 32 150 27.80 677 32T28205E0 5028 HP 2-1¼ 63-50 50 40 150 35.36 677 40T28205E0 5028 HP 2-1½ Product features Optical position indicator as standard Lockable handwheel clamp option Injection molded T-body Minimized dead leg Saves welding time/cost 63-63 50 50 150 37.82 677 50T28205E0 5028 HP 2-2 75-40 65 32 150 23.81 677 32T28205E0 6520 HP 2½ - 1¼ 75-63 65 50 150 38.52 677 50T28205E0 6520 HP 2½ - 2 90-20 80 15 150 6.09 677 15T28205E0 8020 HP 3 - ½ 90-25 80 20 150 9.24 677 20T28205E0 8020 HP 3 - ¾ 90-32 80 25 150 10.15 677 25T28205E0 8020 HP 3-1 90-40 80 32 150 22.90 677 32T28205E0 8020 HP 3-1¼ 90-50 80 40 150 30.88 677 40T28205E0 8020 HP 3-1½ 90-63 80 50 150 38.66 677 50T28205E0 8020 HP 3-2 110-20 100 15 150 6.09 677 15T28205E0 10020 HP* 4 - ½ 110-25 100 20 150 9.24 677 20T28205E0 10020 HP* 4 - ¾ 110-32 100 25 150 10.15 677 25T28205E0 10020 HP* 4-1 110-40 100 32 150 22.90 677 32T28205E0 10020 HP 4-1¼ 110-50 100 40 150 30.88 677 40T28205E0 10020 HP 4-1½ 110-63 100 50 150 38.66 677 50T28205E0 10020 HP 4-2 24 PVDF-HP valves

677 2 Handwheel with locking device d2 d1** DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch Black bonnet 20-20 15 15 150 5.60 677 15T28205EL 1528 HP ½ - ½ 25-20 20 15 150 5.74 677 15T28205EL 2028 HP ¾ - ½ 25-25 20 20 150 7.98 677 20T28205EL 2028 HP ¾ - ¾ 32-20 25 15 150 5.81 677 15T28205EL 2528 HP 1 - ½ 32-25 25 20 150 8.19 677 20T28205EL 2528 HP 1 - ¾ 32-32 25 25 150 10.36 677 25T28205EL 2528 HP 1-1 40-20 32 15 150 5.95 677 15T28205EL 3228 HP 1¼ - ½ 40-32 32 25 150 10.71 677 25T28205EL 3228 HP 1¼ - 1 40-40 32 32 150 26.96 677 32T28205EL 3228 HP 1¼ - 1¼ 50-20 40 15 150 6.09 677 15T28205EL 4028 HP 1½ - ½ 50-25 40 20 150 8.54 677 20T28205EL 4028 HP 1½ - ¾ 50-32 40 25 150 10.50 677 25T28205EL 4028 HP 1½ - 1 50-50 40 40 150 35.01 677 40T28205EL 4028 HP 1½ - 1½ 63-20 50 15 150 6.51 677 15T28205EL 5028 HP 2 - ½ 63-25 50 20 150 9.31 677 20T28205EL 5028 HP 2 - ¾ 63-32 50 25 150 10.99 677 25T28205EL 5028 HP 2-1 63-40 50 32 150 27.80 677 32T28205EL 5028 HP 2-1¼ 63-50 50 40 150 35.36 677 40T28205EL 5028 HP 2-1½ 63-63 50 50 150 37.82 677 50T28205EL 5028 HP 2-2 75-40 65 32 150 23.81 677 32T28205EL 6520 HP 2½ - 1¼ 75-63 65 50 150 38.52 677 50T28205EL 6520 HP 2½ - 2 90-20 80 15 150 6.09 677 15T28205EL 8020 HP 3 - ½ 90-25 80 20 150 9.24 677 20T28205EL 8020 HP 3 - ¾ 90-32 80 25 150 10.15 677 25T28205EL 8020 HP 3-1 90-40 80 32 150 22.90 677 32T28205EL 8020 HP 3-1¼ 90-50 80 40 150 30.88 677 40T28205EL 8020 HP 3-1½ 90-63 80 50 150 38.66 677 50T28205EL 8020 HP 3-2 110-20 100 15 150 6.09 677 15T28205EL 10020 HP* 4 - ½ 110-25 100 20 150 9.24 677 20T28205EL 10020 HP* 4 - ¾ ** d1 = branch d2 = main pipe 110-32 100 25 150 10.15 677 25T28205EL 10020 HP* 4-1 110-40 100 32 150 22.90 677 32T28205EL 10020 HP 4-1¼ 110-50 100 40 150 30.88 677 40T28205EL 10020 HP 4-1½ * Available on request. 110-63 100 50 150 38.66 677 50T28205EL 10020 HP 4-2 PVDF-HP valves 25

2 677 Dimensions T-valve body DN 15 50 (inch) * No dimension given as from DN 65 and larger, there is no registration ring for BCF weld on the spigot. DN2 DN1 Ø d2 s2 LB LB1 LB2 T1 T2 T3 T4 Size Pipe Branch inch inch inch inch inch inch inch inch inch inch 15 15 0.79 0.07 6.54 1.10 1.42 2.13 2.91 1.81 2.68 ½ - ½ 20 15 0.98 0.07 6.54 1.10 1.42 2.13 2.91 1.81 2.68 ¾ - ½ 25 15 1.26 0.09 6.54 1.10 1.42 2.13 2.91 1.81 2.68 1 - ½ 32 15 1.57 0.09 7.24 1.46 1.81 2.13 2.91 1.81 2.68 1¼ - ½ 40 15 1.97 0.12 7.24 1.46 1.81 2.13 2.91 1.81 2.68 1½ - ½ 50 15 2.48 0.12 7.24 1.46 1.81 2.13 2.91 1.81 2.68 2 - ½ 80 15 3.54 0.17 7.72 * 2.01 2.13 2.91 1.81 2.68 3 - ½ 20 20 0.98 0.07 6.54 1.10 1.42 2.13 2.91 1.81 2.68 ¾ - ¾ 25 20 1.26 0.09 6.54 1.10 1.42 2.13 2.91 1.81 2.68 1 - ¾ 40 20 1.97 0.12 7.24 1.46 1.81 2.13 2.91 1.81 2.68 1½ - ¾ 50 20 2.48 0.12 7.24 1.46 1.81 2.13 2.91 1.81 2.68 2 - ¾ 80 20 3.54 0.17 7.72 * 2.01 2.13 2.91 1.81 2.68 3 - ¾ 25 25 1.26 0.09 6.54 1.10 1.42 2.13 2.91 1.81 2.68 1-1 32 25 1.57 0.09 7.64 1.46 1.81 2.13 2.91 1.81 2.68 1¼ - 1 40 25 1.97 0.12 7.64 1.46 1.81 2.13 2.91 1.81 2.68 1½ - 1 50 25 2.48 0.12 7.64 1.46 1.81 2.13 2.91 1.81 2.68 2-1 65 25 2.95 0.14 7.72 * 1.81 2.13 2.91 1.81 2.68 2½ - 1 80 25 3.54 0.17 7.72 * 2.01 2.13 2.91 1.81 2.68 3-1 32 32 1.57 0.09 7.64 1.46 1.81 2.13 2.91 1.81 2.68 1¼ - 1¼ 50 32 2.48 0.12 9.25 1.46 1.81 3.23 5.04 3.07 4.33 2-1¼ 65 32 2.95 0.14 10.00 * 1.81 3.23 5.04 3.07 4.33 2½ - 1¼ 80 32 3.54 0.17 10.00 * 2.01 3.23 5.04 3.07 4.33 3-1¼ 40 40 1.97 0.12 7.64 1.46 1.81 2.13 2.91 1.81 2.68 1½ - 1½ 50 40 2.48 0.12 9.25 1.46 1.81 3.23 5.04 3.07 4.33 2-1½ 80 40 3.54 0.17 10.00 * 2.01 3.23 5.04 3.07 4.33 3-1½ 50 50 2.48 0.12 9.25 1.46 1.81 3.23 5.04 3.07 4.33 2-2 65 50 2.95 0.14 10.00 * 1.81 3.23 5.04 3.07 4.33 2½ - 2 80 50 3.54 0.17 10.00 * 2.01 3.23 5.04 3.07 4.33 3-2 100 32 4.33 0.21 10.78 * 2.44 3.22 5.04 3.07 4.33 4-1¼ 100 40 4.33 0.21 10.78 * 2.44 3.22 5.04 3.07 4.33 4-1½ 100 50 4.33 0.21 10.78 * 2.44 3.22 5.04 3.07 4.33 4-2 26 PVDF-HP valves

677 2 Dimensions T-valve body DN 15 50 (inch) DN2 DN1 Ø d1 s1 L L1 L2 L4 L5 L7 L8 H H1 H2 Size Pipe Branch inch inch inch inch inch inch inch inch inch inch inch inch inch 15 15 0.79 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 ½ - ½ 20 15 0.79 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 ¾ - ½ 25 15 0.79 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 1 - ½ 32 15 0.79 0.07 5.51 1.10 1.42 1.26 1.42 3.27 1.18 2.95 1.65 0.94 1¼ - ½ 40 15 0.79 0.07 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 1½ - ½ 50 15 0.79 0.07 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 2 - ½ 80 15 0.79 0.07 7.32 1.10 1.42 1.26 1.42 3.27 2.01 5.00 2.95 1.97 3 - ½ 20 20 0.98 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 ¾ - ¾ 25 20 0.98 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 1 - ¾ 40 20 0.98 0.07 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 1½ - ¾ 50 20 0.98 0.09 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 2 - ¾ 80 20 0.98 0.09 7.32 1.10 1.42 1.26 1.42 3.27 2.01 5.00 2.95 1.97 3 - ¾ 25 25 1.26 0.09 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 1-1 32 25 1.26 0.09 5.51 1.10 1.42 1.26 1.42 3.27 1.18 2.95 1.93 0.94 1¼ - 1 40 25 1.26 0.09 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 1½ - 1 50 25 1.26 0.09 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 2-1 65 25 1.26 0.09 7.32 1.10 1.42 1.26 1.42 3.27 2.01 5.00 2.95 1.97 2½ - 1 80 25 1.26 0.09 7.32 1.10 1.42 1.26 1.42 3.27 2.01 5.00 2.95 1.97 3-1 32 32 1.57 0.09 8.07 1.46 1.81 1.38 1.81 4.65 1.85 4.21 2.64 1.18 1¼ - 1¼ 50 32 1.57 0.09 8.07 1.46 1.81 1.38 1.57 4.65 1.85 4.21 2.64 1.18 2-1¼ 65 32 1.57 0.09 8.90 1.46 1.81 1.38 1.57 4.65 2.20 5.51 3.46 1.97 2½ - 1¼ 80 32 1.57 0.09 8.90 1.46 1.81 1.38 1.57 4.65 2.20 5.51 3.46 1.97 3-1¼ 40 40 1.97 0.12 8.07 1.46 1.81 1.38 1.81 4.65 1.85 4.21 2.64 1.18 1½ - 1½ 50 40 1.97 0.12 8.07 1.46 1.81 1.38 1.57 4.65 1.85 4.21 2.64 1.18 2-1½ 80 40 1.97 0.12 8.90 1.46 1.81 1.38 1.57 4.655 2.20 5.51 3.46 1.97 3-1½ 50 50 2.48 0.12 8.07 1.46 1.81 1.57 1.81 4.65 1.85 4.21 2.64 1.18 2-2 65 50 2.48 0.12 8.90 1.46 1.81 1.30 1.57 4.65 2.20 5.51 3.46 1.97 2½ - 2 80 50 2.48 0.12 8.90 1.46 1.81 1.30 1.57 4.65 2.20 5.51 3.46 1.97 3-2 100 32 1.57 0.09 9.37 1.46 1.81 1.58 1.81 5.39 1.77 5.23 3.03 1.55 4-1¼ 100 40 1.69 0.12 9.37 1.46 1.81 1.58 1.81 5.39 1.77 5.23 3.03 1.55 4-1½ 100 50 2.48 0.12 9.37 1.46 1.81 1.58 1.81 5.39 1.77 5.23 3.03 1.55 4-2 PVDF-HP valves 27

2 677 Dimensions Bonnet with handwheel (inch) DN A A1 Ø B 15 25 2.83 0.55 3.54 32 50 4.21 0.35 5.51 28 PVDF-HP valves

677 2 Dimensions Diaphragm (inch) (PTFE with EPDM backing) DN L B H 15 25 2.83 2.64 0.24 32 50 4.72 4.25 0.28 PVDF-HP valves 29

2 690 2/2 way T-diaphragm valve, pneumatically operated d 20 110 / DN 15 100 PVDF-HP / diaphragm material PTFE d2 d1 DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch Black actuator 20 20 15 15 150 5.60 690 15T28205E1 1528 HP ½ - ½ 25 20 20 15 150 5.74 690 15T28205E1 2028 HP ¾ - ½ 25 25 20 20 150 7.98 690 20T28205E1 2028 HP ¾ - ¾ 32 20 25 15 150 5.81 690 15T28205E1 2528 HP 1 - ½ 32 25 25 20 150 8.19 690 20T28205E1 2528 HP 1 - ¾ 32 32 25 25 150 10.36 690 25T28205E1 2528 HP 1-1 40 20 32 15 150 5.95 690 15T28205E1 3228 HP 1¼ - ½ 40 32 32 25 150 10.71 690 25T28205E1 3228 HP 1¼ - 1 40 40 32 32 150 26.96 690 32T28205E1 3228 HP 1¼ - 1¼ 50 20 40 15 150 6.09 690 15T28205E1 4028 HP 1½ - ½ 50 25 40 20 150 8.54 690 20T28205E1 4028 HP 1½ - ¾ 50 32 40 25 150 10.50 690 25T28205E1 4028 HP 1½ - 1 50 50 40 40 150 35.01 690 40T28205E1 4028 HP 1½ - 1½ 63 20 50 15 150 6.51 690 15T28205E1 5028 HP 2 - ½ 63 25 50 20 150 9.31 690 20T28205E1 5028 HP 2 - ¾ 63 32 50 25 150 10.99 690 25T28205E1 5028 HP 2-1 63 40 50 32 150 27.80 690 32T28205E1 5028 HP 2-1¼ 63 50 50 40 150 35.36 690 40T28205E1 5028 HP 2-1½ Product features Injection molded T-body Minimized dead leg Saves welding time/cost 63 63 50 50 150 37.82 690 50T28205E1 5028 HP 2-2 75 40 65 32 150 23.81 690 32T28205E1 6520 HP 2½ - 1¼ 75 63 65 50 150 38.52 690 50T28205E1 6520 HP 2½ - 2 90 20 80 15 150 6.09 690 15T28205E1 8020 HP 3 - ½ 90 25 80 20 150 9.24 690 20T28205E1 8020 HP 3 - ¾ 90 32 80 25 150 10.15 690 25T28205E1 8020 HP 3-1 90 40 80 32 150 22.90 690 32T28205E1 8020 HP 3-1¼ 90 50 80 40 150 30.88 690 40T28205E1 8020 HP 3-1½ 90 63 80 50 150 38.66 690 50T28205E1 8020 HP 3-2 110 20 100 15 150 6.09 690 15T28205E1 10020 HP* 4 - ½ 110 25 100 20 150 9.24 690 20T28205E1 10020 HP* 4 - ¾ 110 32 100 25 150 10.15 690 25T28205E1 10020 HP* 4-1 110 40 100 32 150 22.90 690 32T28205E1 10020 HP 4-1¼ 110 50 100 40 150 30.88 690 40T28205E1 10020 HP 4-1½ 110 63 100 50 150 38.66 690 50T28205E1 10020 HP 4-2 30 PVDF-HP valves

690 2 Dimensions Actuator (inch) DN A A1 Ø B 15 25 5.87 2.64 4.92 32 50 8.74 3.98 8.27 Dimensions Diaphragm (inch) (PTFE with EPDM backing) DN L B H 15 25 2.83 2.64 0.24 32 50 4.72 4.25 0.28 Technical data is valid for control function 1 (normally closed) Control pressure: 82-105 psi (5,5 7 bar), max. working pressure: 90 psi (6 bar) Control function 2 (normally open) and 3 (double acting) upon request * Available on request. PVDF-HP valves 31

2 690 Dimensions T-valve body DN 15 50 (inch) * No dimension given as from DN 65 and larger, there is no registration ring for BCF weld on the spigot. DN2 DN1 Ø d2 s2 LB LB1 LB2 T1 T2 T3 T4 Size Pipe Branch inch inch inch inch inch inch inch inch inch inch 15 15 0.79 0.07 6.54 1.10 1.42 2.13 2.91 1.81 2.68 ½ - ½ 20 15 0.98 0.07 6.54 1.10 1.42 2.13 2.91 1.81 2.68 ¾ - ½ 25 15 1.26 0.09 6.54 1.10 1.42 2.13 2.91 1.81 2.68 1 - ½ 32 15 1.57 0.09 7.24 1.46 1.81 2.13 2.91 1.81 2.68 1¼ - ½ 40 15 1.97 0.12 7.24 1.46 1.81 2.13 2.91 1.81 2.68 1½ - ½ 50 15 2.48 0.12 7.24 1.46 1.81 2.13 2.91 1.81 2.68 2 - ½ 80 15 3.54 0.17 7.72 * 2.01 2.13 2.91 1.81 2.68 3 - ½ 20 20 0.98 0.07 6.54 1.10 1.42 2.13 2.91 1.81 2.68 ¾ - ¾ 25 20 1.26 0.09 6.54 1.10 1.42 2.13 2.91 1.81 2.68 1 - ¾ 40 20 1.97 0.12 7.24 1.46 1.81 2.13 2.91 1.81 2.68 1½ - ¾ 50 20 2.48 0.12 7.24 1.46 1.81 2.13 2.91 1.81 2.68 2 - ¾ 80 20 3.54 0.17 7.72 * 2.01 2.13 2.91 1.81 2.68 3 - ¾ 25 25 1.26 0.09 6.54 1.10 1.42 2.13 2.91 1.81 2.68 1-1 32 25 1.57 0.09 7.64 1.46 1.81 2.13 2.91 1.81 2.68 1¼ - 1 40 25 1.97 0.12 7.64 1.46 1.81 2.13 2.91 1.81 2.68 1½ - 1 50 25 2.48 0.12 7.64 1.46 1.81 2.13 2.91 1.81 2.68 2-1 65 25 2.95 0.14 7.72 * 1.81 2.13 2.91 1.81 2.68 2½ - 1 80 25 3.54 0.17 7.72 * 2.01 2.13 2.91 1.81 2.68 3-1 32 32 1.57 0.09 7.64 1.46 1.81 2.13 2.91 1.81 2.68 1¼ - 1¼ 50 32 2.48 0.12 9.25 1.46 1.81 3.23 5.04 3.07 4.33 2-1¼ 65 32 2.95 0.14 10.00 * 1.81 3.23 5.04 3.07 4.33 2½ - 1¼ 80 32 3.54 0.17 10.00 * 2.01 3.23 5.04 3.07 4.33 3-1¼ 40 40 1.97 0.12 7.64 1.46 1.81 2.13 2.91 1.81 2.68 1½ - 1½ 50 40 2.48 0.12 9.25 1.46 1.81 3.23 5.04 3.07 4.33 2-1½ 80 40 3.54 0.17 10.00 * 2.01 3.23 5.04 3.07 4.33 3-1½ 50 50 2.48 0.12 9.25 1.46 1.81 3.23 5.04 3.07 4.33 2-2 65 50 2.95 0.14 10.00 * 1.81 3.23 5.04 3.07 4.33 2½ - 2 80 50 3.54 0.17 10.00 * 2.01 3.23 5.04 3.07 4.33 3-2 100 32 4.33 0.21 10.78 * 2.44 3.22 5.04 3.07 4.33 4-1¼ 100 40 4.33 0.21 10.78 * 2.44 3.22 5.04 3.07 4.33 4-1½ 100 50 4.33 0.21 10.78 * 2.44 3.22 5.04 3.07 4.33 4-2 32 PVDF-HP valves

690 2 Dimensions T-valve body DN 15 50 (inch) DN2 DN1 Ø d1 s1 L L1 L2 L4 L5 L7 L8 H H1 H2 Size Pipe Branch inch inch inch inch inch inch inch inch inch inch inch inch inch 15 15 0.79 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 ½ - ½ 20 15 0.79 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 ¾ - ½ 25 15 0.79 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 1 - ½ 32 15 0.79 0.07 5.51 1.10 1.42 1.26 1.42 3.27 1.18 2.95 1.65 0.94 1¼ - ½ 40 15 0.79 0.07 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 1½ - ½ 50 15 0.79 0.07 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 2 - ½ 80 15 0.79 0.07 7.32 1.10 1.42 1.26 1.42 3.27 2.01 5.00 2.95 1.97 3 - ½ 20 20 0.98 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 ¾ - ¾ 25 20 0.98 0.07 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 1 - ¾ 40 20 0.98 0.07 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 1½ - ¾ 50 20 0.98 0.09 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 2 - ¾ 80 20 0.98 0.09 7.32 1.10 1.42 1.26 1.42 3.27 2.01 5.00 2.95 1.97 3 - ¾ 25 25 1.26 0.09 5.12 1.10 1.42 1.26 1.42 3.27 0.98 2.48 1.65 0.67 1-1 32 25 1.26 0.09 5.51 1.10 1.42 1.26 1.42 3.27 1.18 2.95 1.93 0.94 1¼ - 1 40 25 1.26 0.09 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 1½ - 1 50 25 1.26 0.09 6.42 1.10 1.42 1.26 1.42 3.27 1.65 3.86 2.36 1.42 2-1 65 25 1.26 0.09 7.32 1.10 1.42 1.26 1.42 3.27 2.01 5.00 2.95 1.97 2½ - 1 80 25 1.26 0.09 7.32 1.10 1.42 1.26 1.42 3.27 2.01 5.00 2.95 1.97 3-1 32 32 1.57 0.09 8.07 1.46 1.81 1.38 1.81 4.65 1.85 4.21 2.64 1.18 1¼ - 1¼ 50 32 1.57 0.09 8.07 1.46 1.81 1.38 1.57 4.65 1.85 4.21 2.64 1.18 2-1¼ 65 32 1.57 0.09 8.90 1.46 1.81 1.38 1.57 4.65 2.20 5.51 3.46 1.97 2½ - 1¼ 80 32 1.57 0.09 8.90 1.46 1.81 1.38 1.57 4.65 2.20 5.51 3.46 1.97 3-1¼ 40 40 1.97 0.12 8.07 1.46 1.81 1.38 1.81 4.65 1.85 4.21 2.64 1.18 1½ - 1½ 50 40 1.97 0.12 8.07 1.46 1.81 1.38 1.57 4.65 1.85 4.21 2.64 1.18 2-1½ 80 40 1.97 0.12 8.90 1.46 1.81 1.38 1.57 4.655 2.20 5.51 3.46 1.97 3-1½ 50 50 2.48 0.12 8.07 1.46 1.81 1.57 1.81 4.65 1.85 4.21 2.64 1.18 2-2 65 50 2.48 0.12 8.90 1.46 1.81 1.30 1.57 4.65 2.20 5.51 3.46 1.97 2½ - 2 80 50 2.48 0.12 8.90 1.46 1.81 1.30 1.57 4.65 2.20 5.51 3.46 1.97 3-2 100 32 1.57 0.09 9.37 1.46 1.81 1.58 1.81 5.39 1.77 5.23 3.03 1.55 4-1¼ 100 40 1.69 0.12 9.37 1.46 1.81 1.58 1.81 5.39 1.77 5.23 3.03 1.55 4-1½ 100 50 2.48 0.12 9.37 1.46 1.81 1.58 1.81 5.39 1.77 5.23 3.03 1.55 4-2 PVDF-HP valves 33

3 677 PP-HP valves 2/2 way diaphragm valve, manually operated d 20 63 / DN 15 50 PP-HP / diaphragm material PTFE d DN PN Weight Cv Order code Size mm psi lbs gpm inch Black bonnet: Body inliner PP grey / outliner PP, reinforced 20 15 150 0.7 6.5 677 15D20715E0 HP ½ 25 20 150 0.7 9.6 677 20D20715E0 HP ¾ 32 25 150 0.7 12.3 677 25D20715E0 HP 1 40 32 150 1.4 21.0 677 32D20715E0 HP 1¼ 50 40 150 1.4 29.2 677 40D20715E0 HP 1½ 63 50 150 2.4 53.7 677 50D20715E0 HP 2 Black bonnet: Body inliner PP natural / outliner PP, reinforced 20 15 150 1.54 6.5 677 15D20705E0 HP ½ 25 20 150 1.54 9.6 677 20D20705E0 HP ¾ 32 25 150 1.54 12.3 677 25D20705E0 HP 1 40 32 150 3.08 21.0 677 32D20705E0 HP 1¼ 50 40 150 3.08 29.2 677 40D20705E0 HP 1½ 63 50 150 5.28 53.7 677 50D20705E0 HP 2 Product features Optical position indicator as standard Lockable handwheel clamp option Electrical position indication (open) optional 34 PP-HP valves

677 3 Dimensions Bonnet (inch) DN Ø B A A1 15 25 3.54 2.80 0.55 32 40 4.49 3.50 0.31 50 5.51 4.21 0.35 Dimensions Valve body DN 15 50 (inch) DN L H H1 Ø d c s 15 6.06 1.97 1.02 0.79 1.30 0.07 20 6.06 1.97 1.02 0.98 1.30 0.09 25 6.06 1.97 1.02 1.26 1.30 0.12 32 7.64 2.91 1.57 1.57 1.30 0.15 40 7.64 2.91 1.57 1.97 1.30 0.18 50 8.82 3.23 1.57 2.48 1.30 0.23 Dimensions Body mounting DN 15 50 (inch) DN M f 15 M 6 0.98 20 M 6 0.98 25 M 6 0.98 32 M 8 1.75 40 M 8 1.75 50 M 8 1.75 PP-HP valves 35

3 690 2/2 way diaphragm valve, pneumatically operated d 20 63 / DN 15 50 PP-HP / diaphragm material PTFE Product features Electrical position indication (open) optional d DN PN Weight Cv Order code Size mm psi lbs gpm inch Black actuator: Body inliner PP grey / outliner PP, reinforced 20 15 150 3.96 6.51 690 15D20715E1 HP ½ 25 20 150 3.96 9.59 690 20D20715E1 HP ¾ 32 25 150 3.96 12.23 690 25D20715E1 HP 1 40 32 150 8.80 21.01 690 32D20715E1 HP 1¼ 50 40 150 8.80 29.20 690 40D20715E1 HP 1½ 63 50 150 16.28 53.71 690 50D20715E1 HP 2 Technical data is valid for control function 1 (normally closed) Control pressure: 82-105 psi (5,5 7 bar) Max. working pressure: 90 psi (6 bar Control function 2 (normally open) and 3 (double acting) upon request Black actuator: Body inliner PP natural / outliner PP, reinforced 20 15 150 3.96 6.51 690 15D20705E1 HP ½ 25 20 150 3.96 9.59 690 20D20705E1 HP ¾ 32 25 150 3.96 12.23 690 25D20705E1 HP 1 40 32 150 8.80 21.01 690 32D20705E1 HP 1¼ 50 40 150 8.80 29.20 690 40D20705E1 HP 1½ 63 50 150 16.28 53.71 690 50D20705E1 HP 2 36 PP-HP valves

690 3 Dimensions Actuator control function 1 (NC) (inch) DN Ø B A A1 15 25 4.92 5.16 1.85 32 40 6.10 6.97 2.95 50 8.27 8.46 3.54 Dimensions Actuator control function 2 + 3 (NO and DA) (inch) DN Ø B A A1 A2 15 25 4.92 3.86 1.85 1.06 32 40 6.10 5.31 2.95 1.06 50 8.27 6.46 3.54 1.14 Control pressure [psi] 90 75 60 45 30 15 Steuerfunktion 2 + 3 15 30 45 60 75 90 105 120135 150 Working pressure [psi] DN 32, 40 DN 50 DN 15, 20, 25 Measured values correspond to control function 2 (normally open). For control function 3 (double acting) control pressure values are approx. 15 psi (1 bar) lower. PP-HP valves 37

3 690 Dimensions Valve body DN 15 50 (inch) DN L H H1 Ø d c s 15 6.06 1.97 1.02 0.79 1.30 0.07 20 6.06 1.97 1.02 0.98 1.30 0.09 25 6.06 1.97 1.02 1.26 1.30 0.12 32 7.64 2.91 1.57 1.57 1.30 0.15 40 7.64 2.91 1.57 1.97 1.30 0.18 50 8.82 3.23 1.57 2.48 1.30 0.23 Dimensions Body mounting DN 15 50 (inch) DN M f 15 M 6 0.98 20 M 6 0.98 25 M 6 0.98 32 M 8 1.75 40 M 8 1.75 50 M 8 1.75 38 PP-HP valves

690 3 PP-HP valves 39

4 883, 833, 834 / 873, 823, 824 Flowmeters PVDF float, O-ring FPM with/without magnet d DN Meas. range PN Weight Order code Size mm gpm psi lbs inch with magnet 20 15 0.09 1.10 150 0.35 883 15D 7820 42024 250 HP ½ 25 20 0.26 2.82 150 0.62 883 20D 7820 42034 640 HP ¾ 32 25 0.44 4.40 150 0.81 883 25D 7820 42044 1000 HP 1 40 32 0.88 11.00 150 2.16 833 32D 7820 42063 2500 HP 1¼ 63 50 1.76 17.61 150 4.29 833 50D 7820 42072 4000 HP 2 63 50 0.44 4.40 150 4.11 833 50D 7820 42073 6400 HP 2 63 50 4.40 44.03 150 4.86 834 50D 7820 42073 10000 HP 2 without magnet 20 15 0.09 1.10 150 0.35 873 15D 7820 42024 250 HP ½ 25 20 0.26 2.82 150 0.62 873 20D 7820 42034 640 HP ¾ 32 25 0.44 4.40 150 0.81 873 25D 7820 42044 1000 HP 1 40 32 0.88 11.00 150 2.16 823 32D 7820 42063 2500 HP 1¼ 63 50 1.76 17.61 150 4.29 823 50D 7820 42072 4000 HP 2 63 50 0.44 4.40 150 4.11 823 50D 7820 42073 6400 HP 2 63 50 4.40 44.03 150 4.86 824 50D 7820 42073 10000 HP 2 Product features Extensive range of accessories for detection of measured values and flow rate control Dovetail sections for mounting limit switches and instrument sensors Easy installation and removal Magnet is imbedded in liquid tight PVDF float 40 Flowmeters

883, 833, 834 / 873, 823, 824 4 Dimensions Flowmeters (inch) DN Ø D Ø d s L1 L2 L3 15 1.69 0.79 0.07 6.65 7.64 10.83 20 2.09 0.98 0.07 7.17 8.15 11.57 25 2.36 1.26 0.09 7.77 8.86 12.40 32 2.91 1.57 0.09 13.46 14.57 18.35 50 4.06 2.48 0.12 13.46 14.96 18.82 Legend Item Designation Pieces 1 Measuring tube 1 2 Float 1 3 Float stop 2 4 Union nut 2 5 Union hub 2 6 O-ring 2 7 Flow indicator 2 Flowmeters 41

5 1041, 1300, 1114 Accessories Flare adapter For transition from PVDF-HP to PFA tube d Tube PN e D L l Order code inch inch psi inch inch inch inch 0.78 ¼ 150 0.07 0.80 3.28 1.5 FLAD 20D2020 10 475 HP 0.78 3 / 8 150 0.07 0.93 2.27 1.5 FLAD 20D2020 10 675 HP 0.78 ½ 150 0.07 1.06 3.42 1.5 FLAD 20D2020 10 875 HP 0.78 ¾ 150 0.07 1.35 3.59 1.5 FLAD 20D2020 10 1275 HP 0.98 ¼ 150 0.07 0.80 3.28 1.5 FLAD 25D2020 10 475 HP 0.98 3 / 8 150 0.07 0.93 3.37 1.5 FLAD 25D2020 10 675 HP 0.98 ½ 150 0.07 1.06 3.42 1.5 FLAD 25D2020 10 875 HP 0.98 ¾ 150 0.07 1.35 3.59 1.5 FLAD 25D2020 10 1275 HP 0.98 1 150 0.07 1.81 3.75 1.5 FLAD 25D2020 10 1675 HP 1.25 ½ 150 2.4 1.06 3.42 1.5 FLAD 32D2020 10 875 HP 1.25 ¾ 150 2.4 1.35 3.59 1.5 FLAD 32D2020 10 1275 HP 1.25 1 150 2.4 1.81 3.75 1.5 FLAD 32D2020 10 1675 HP 1.57 ½ 150 2.4 1.06 3.42 1.5 FLAD 40D2020 10 875 HP 1.57 ¾ 150 2.4 1.35 3.59 1.5 FLAD 40D2020 10 1275 HP 1.57 1 150 2.4 1.81 3.75 1.5 FLAD 40D2020 10 1675 HP Mounting plates for GEMÜ 600, 677*, 690* d DN Order code Size mm inch 20 32 15 25 1041 000Z0305 1½ - 1 20 32 32 40 1041 000Z0305 HP** 1¼ - 1½ * valid for PVDF-HP valves, for PP-HP valves upon request ** HP cleaned and packaged 42 Accessories

1041, 1230/1201 5 Stroke limiter/ indicator for GEMÜ 690 d DN Order code Size mm inch 20 32 15 25 1114 000Z1 ½ - 1 40 50 32 40 1114 000Z2 1¼ - 1½ 63 50 1114 000Z3 2 Optical position indicator for GEMÜ 690 d DN Order code Size mm inch 20 32 15 25 1300 000Z13 ½ - 1 40 50 32 40 1300 000Z14 1¼ - 1½ 63 50 1300 000Z15 2 75 90 65 80 1300 000Z16 2½ - 3 110 100 1300 000Z17 4 Electrical position indicators with microswitches for GEMÜ 600, 610, 690 d DN Function Type Size mm inch Position indicator without mounting kit 20 63 15 50 Open-Closed 1230 ½ - 2 75 110 65 100 Open-Closed 1201 2½ - 4 Mounting kit for GEMÜ 1230 for GEMÜ 1201 1230 S01Z 1201 S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. Accessories 43

5 1231/1211 Electrical position indicators ATEX with 2-wire Namur proximity switches for GEMÜ 600, 610, 690 d DN Function Type Size mm inch Position indicator without mounting kit 20 63 15 50 Open-Closed 1231 ½ - 2 75 110 65 100 Open-Closed 1211 2½ - 4 Mounting kit for GEMÜ 1231 for GEMÜ 1211 1231 S01Z 1211 S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. 44 Accessories

1232/1214 5 Electrical position indicators with 3-wire proximity switches for GEMÜ 600, 610, 690 d DN Function Type mm Position indicator without mounting kit 20 63 15 50 Open-Closed 1232 ½ - 2 75 110 65 100 Open-Closed 1214 2½ - 4 Mounting kit for GEMÜ 1232 for GEMÜ 1214 1232 S01Z 1214 S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. Accessories 45

5 1234 Electrical position indicator, intelligent programming for GEMÜ 610 d DN Function Type Size mm inch Position indicator without mounting kit 20 15 Open-Closed 1234 ½ Mounting kit for GEMÜ 1234 1234 S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. 46 Accessories

1235 5 Electrical position indicator, intelligent programming for GEMÜ 600, 610, 690 d DN Function Type Size mm inch Position indicator without mounting kit 20 110 15 100 Open-Closed 1235 ½ - 4 Mounting kit for GEMÜ 1235 4222 S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. Accessories 47

5 1251/1252, 1256/1257 Limit switches for GEMÜ 833, 834, 883 (DN 25 50) Version Max. contact Min. contact Order code 1251 000Z 1252 000Z Limit switches for GEMÜ 883 (DN 15 + 20) Version Max. contact Min. contact Order code 1256 000Z 1257 000Z 48 Accessories

1270 1273 5 Instrument sensor, continuous measurement for GEMÜ 833, 834, 883 d DN Function Order code Size mm inch 20 25 15 20 for GEMÜ 883 1271 000Z1001 ½ - ¾ 32 25 for GEMÜ 883 1271 000Z2501 1 40 63 32 50 for GEMÜ 833/834 1270 000Z2501 1¼ - 2 with integrated 2-wire measuring transducer 20 25 15 20 for GEMÜ 883 1273 000Z1001 ½ - ¾ 32 25 for GEMÜ 883 1273 000Z2501 1 40 63 32 50 for GEMÜ 833/834 1272 000Z2501 1¼ - 2 Accessories 49

Purity, Perfection, Safety The highest quality assurance is our standard To guarantee absolute purity, we manufacture, clean, assemble and pack all High Purity products in cleanroom environments. Injection molding In separate rooms (only HP materials) under Laminar Flow, class 1000. Cleaning of High Purity products Fully automatic 3-chamber purifier, prewash with DI water/ tenside, ultrasonic cleaning and final rinse with DI water (»all wetted parts«in PVDF and Halar), drying (hot air cleanroom class 1000) 18.2 M DI water. DI water treatment plant 18.2 M DI water for cleaning and testing, pendulum softening, reverse osmosis, UV sterilization, MB ion exchanger, polishing, submicron filter, PVDF-HP loop, recirculation. 50

Assembly, test, packing The entire process comprising cleaning, assembly, test and mounting takes place in cleanroom class 100. Quality assurance The production of the GEMÜ High Purity products are subject to a state-of-the-art continuous quality management system. Use of specified/tested raw materials SPC-statistical process control Training of our personnel Third-party inspection Customer audits Continuous improvements ensure a constant high quality which corresponds to the requirements of our customers and their product applications. 51

VALVES, MEASUREMENT AND CONTROL SYSTEMS GEMÜ Valves INC. 3800 Camp Creek Parkway Suite 120, Building 2600 Atlanta, Georgia 30331 Phone: +1-678-5 53 34 00 Telefax: +1-404-3 44 93 50 e-mail: info@gemu.com http://www.gemu.com Subject to alteration 03/2006 88090546