Position Indicators Valve Positioners
Apex 5000 The Apex 5000 Pneumatic Positioner provides accurate valve positioning with advanced features. It may be used with 3-15 psi pneumatic control signals, or fitted with one of three current-to-pressure transducers for 4-20 ma signal input. The Apex is available with many options including: limit switches, position feedback transmitter, speed controls, and our Pharos TM visual position indicator. Non-interactive Span Adjustment reduces calibration time. Patented Adjustable Gain allows positioner sensitivity adjustment without removing or replacing components. Heavy duty aluminum construction for durability and long life. Dichromate undercoat and polyester powder top coat provide atmospheric corrosion resistance. Captive Cover Screws permit calibration without potential for losing screws. Optional Pharos TM Visual Position Indicator provides fully adjustable, high contrast, fullangle viewing of valve position. Field Upgradeable. The Apex 5000 is fieldupgradeable to any of three electro-pneumatic options without removing the cover. Switches or a position transmitter are field installable by replacing the shaft and adding modular "cards." Vibration Resistant. Low spool mass, outboard spool bearings, and locking calibration adjustments provide reliable operation under high vibration. Coupler-free NAMUR mounting option. HOW TO ORDER MODEL INPUT POS. INDICATOR GAUGES SPOOL VALVE CAM OPTIONS A5 * Supplied as standard 3-15 PSIG 4-20mA (5100) Nema 4, 4X 4-20mA (5200) Nema 4, 4X, 7 FM 4-20mA (5400) Intrinsically Safe FM 0 1 2 4 Flat * Pharos 1 2 None * Gauges S. Stl. Ggs 3 4 5 Low Flow Hi Flow * Max Flow 6 7 8 Linear * Linear 30, 45, 60, 90 Characterized Sqr, SqrRt, Lin 60 Degree Special Cam/Shaft Linear Actuators A B C D L 4-20mA Feedback 0-1K Ohm Feedback 0-10K Ohm Feedback 2 SPDT Mech. Sw's. 2 SPST Prox. Sw's. 2 SPDT Prox. Sw's. High Temp./Viton Epoxy Coated Namur Shaft Hex Cover Screws Block/Bleed Module Flow Control Module F G H K M N P R T V X Y 2
ACCORD MISSION: Accord Controls will be recognized as the service leader in our industry. We will focus on fast, accurate, on time production and superior customer service from application/quotation through support after sale. Apex 6000 The Apex 6000 Pneumatic Positioner provides similar features and options as our Apex 5000. The housings and covers are constructed from engineered resin for superior corrosion resistance. Non-interactive Span Adjustment reduces calibration time. Corrosion Resistant Materials. All exposed parts are either stainless steel, or high strength engineered resins to permit use in highly corrosive environments. Captive Cover Screws permit calibration without potential for losing screws. Optional Pharos TM Visual Position Indicator provides fully adjustable, high contrast, full angle viewing of valve position. Field Upgradeable. The Apex 6000 is fieldupgradeable to an electro-pneumatic option without removing the cover. Switches or a position transmitter are field installable by replacing the shaft and adding modular "cards." Vibration Resistant. Low spool mass, outboard spool bearings, and locking calibration adjustments provide reliable operation under high vibration. Coupler-free NAMUR mounting option. HOW TO ORDER MODEL INPUT POS. INDICATOR GAUGES SPOOL VALVE CAM OPTIONS A6 * Supplied as standard 3-15 PSIG 4-20mA (6100) Nema 4, 4X 0 1 Flat * Pharos 1 2 None * Gauges S. Stl. Ggs 3 4 5 Low Flow Hi Flow * Max Flow 6 7 8 Linear * Linear 30, 45, 60, 90 Characterized Sqr, SqrRt, Lin 60 Degree Special Cam/Shaft Linear Actuators A B C D L 4-20mA Feedback 0-1K Ohm Feedback 0-10K Ohm Feedback 2 SPDT Mech. Sw's. 2 SPST Prox. Sw's. 2 SPDT Prox. Sw's. Namur Shaft Hex Cover Screws Block/Bleed Module Flow Control Module F G H K M N T V X Y 3
Apex M odular P ositioning S ystem Apex Options All of the options shown below may be factory or field installed in either Apex models. Limit Switch Options: Apex Limit Switch Options provide reliable indication of full open and full closed positions. Features include spring loaded quick-set cams and detachable terminal block. Three switch configurations are available: Type K Type M Type N (2) SPDT Mechanical Form C (2) SPST Proximity Form A (2) SPDT Proximity Form C Position Transmitter: Apex Position Transmitter allows full stroke valve position indication with 4-20 ma signal. Features include LED indication of loop power and internal zero and span adjustment. Output Options: Block and Bleed Module - Blocks positioner output and vents actuator for manual override. Flow Control Module Flow Control Module - Adjustable flow restriction allows actuator speed adjustment. Block/Bleed Module 1/4 NPT Block 4
ACCORD PRODUCT PHILOSOPHY: Accord's product offering is unique in our industry. We have developed both positioner and limit switch technology. This means we can meet all of your valve automation control needs. Our products are high quality and differentiated providing superior value. Apex I/P Transducer Option Apex I/P Transducers convert 4-20 ma input signals into 3-15 psi pneumatic signals for the Apex positioners. Any of these options may be factory or field installed. Apex 5100 I/P Module Designed for NEMA 4 applications, this model features: Automatic supply pressure and ambient temperature compensation. LED loop power indication. Internal zero and span calibration. Internal I/P filter/regulator. Apex 5200/5400 I/P Module These options permit use in hazardous locations. The 5200 is FM approved explosion-proof and the 5400 is FM approved intrinsically safe. Features include: Automatic supply pressure and ambient temperature compensation Internal zero and span calibration Internal I/P filter/regulator. 5
UltraSwitch AXL Series Our AXL Series rotary limit switch enclosure provides visual and remote electrical indication of valve position. Constructed of diecast aluminum and powder coated, the AXL Series provides explosion proof protection. It is available with a wide range of limit switches and position transmitters. FEATURES: Large, red and green Pharos TM visual indicator for wide angle viewing. Tool-free, spring loaded, quick set cams provide 4 o adjustment. Pre-wired multipoint terminal strip. Dual potting wells. Dual 3/4" conduit entries. Captive, stainless steel cover screws. Heavy duty aluminum construction for durability and long life. Dichromate undercoat and polyester powder top coat provide atmospheric corrosion resistance. Coupler-free NAMUR mounting option. 6
ACCORD SERVICES: Applications Assistance. In-factory and on-site training sessions. Custom-designed options to fit special applications. Published technical reference manual. UltraSwitch APL Series Emergency 48-hour factory repair/ return service. The APL Series offers similar features as the AXL series with an engineered resin enclosure for chemical resistance. It is designed for NEMA 4x applications, featuring a unique labyrinth cover seal. HOW TO ORDER (Select from each column) PREFIX 1 OPTIONAL PREFIX ULTRASWITCH MODEL COVER A - When ordering, begin all No.'s with the prefix A N - NAMUR Shaft E - Epoxy Coated B - Namur/Epoxy XL - Aluminum PL - Zytel 1 - Flat 2 - Pharos C - Pharos 90 o 3-way D - Pharos 180 o 3-way E - Pharos 180 o Block Center SWITCHES 1 - (2) 15 amp SPDT 2 - (4) 15 amp SPDT 3 - (2) 15 AMP DPDT 4 - (2) Proximity SPST 5 - (2) Proximity SPDT 6 - (4) Proximity SPST 8 - (2) P & F Proximity NAMUR A - (4) 15 amp SPDT with cams for 3-way position control U - (2) "Go" Proximity SPDT Z - AS-i option *for (2 or 4) heavy duty Phazer Proximity switch options, see page 9 0 - (0) Empty ANALOG OUTPUT T - 4-20 ma Transmitter A - Potentiometer 0-1K ohm B - Potentiometer 0-5K ohm C - Potentiometer 0-10K ohm ASCO SOLENOID VALVES 3-WAY 4-WAY A - EF8320G184 F - EF8345G3 B - EF8321G1 G - EF8342C1 C - EF8316G64 H - EF8344G72 E - EF8316G74 J - EF8344G74 K - EF83444G76 0 - None POTTED LEADS P - Potted Leads Specify which conduit, number of leads, length and wire color 0 - None 7
UltraSwitch AGL Series Our AGL series switch enclosure is a more compact, less expensive package with similar features as our AXL series. It is designed to NEMA4 standards and may be configured for sanitary applications. Pharos visual indicator. Quick set cams. Dual 1/2" conduit entries. Captive, stainless steel cover screws. Durable aluminum construction with internal and external polyester powder coating. Coupler-free NAMUR mounting option. Sanitary Applications The AGL Series is available with white food-grade epoxy coating and captive, stainless steel hexhead cover screws. The housing features no nooks or crannies to facilitate washdown. HOW TO ORDER (Select from each column) PREFIX 1 OPTIONAL PREFIX MODEL COVER SWITCHES ASCO VALVES OPTIONS A - (Always "A") N - NAMUR Shaft E - Epoxy Coated H - 1/4" H.H. Bolts GL 1 - Flat Top 2 - Pharos Dome 1 - (2) 15 amp SPDT Mech. 3 - (2) 10 amp DPDT Mech. 4 - (2) SPST Prox. 5 - (2) SPDT Prox. 8 - (2) P & F/Namur Prox. * for (2) heavy duty Phazer Proximity switch options, see page 9 0 - (0) Empty A - EF8320G184 B - EF8321G001 C - EF8316G064 F - EF8345H003 G - EF8342C001 0 - NONE 3-3 Conduit Entries 8
UltraSwitch Internal Switch Options UltraSwitch Mechanical Switches Type 1 Type 2 Type 3 (2) SPDT Mechanical Form C 15 amp @ 125 VAC, 1/2 amp @ 125VDC (4) SPDT Mechanical Form C 15 amp @ 125 VAC, 1/2 amp @ 125VDC (2) DPDT Mechanical Form CC 15 amp @ 125 VAC UltraSwitch Proximity Switches Type 4 (2) SPST Proximity Form A 0.35 amp @ 140 VAC, 1 amp @ 50 VDC Specify Type 6 for(4)switches Type 5 (2) SPDT Proximity Form C 1/4 amp @ 120 VAC, 1/4 amp @ 28 VDC Type 8 (2) Solid State Pepperl & Fuchs Proximity UltraSwitch Phazer II High Performance Proximity Switches Phazer II switches are hermetically and environmentally sealed for severe service and long life. They are available with LED indication to facilitate calibration and trouble shooting. Type P Phazer II (2) SPDT Form C 3 amp @ 120 VAC, 2 amp @ 24 VDC Specify Type H for (4) switches Type L Phazer II LED (2) SPDT Form C w/led 1/2 amp @ 120 VAC, 0.3 amp@ 24 VDC * Minimum current = 50 ma Specify Type M for (4) switches Phazer II BRS Switches Phaser II BRS switches feature bifurcated contacts for both high and very low current (>8mA) applications. They are also hermetically and environmentally sealed for severe service and long life. Type T Phazer II BRS (2) SPST Form A 3 amp VAC, 1/2 amp VDC Specify Type W for(4)switches Type X Phazer II BRS LED (2) SPST Form A w/led 1/2 amp @ 120 VAC, 0.3 amp @ 24 VDC * Minimum current = 50mA Specify Type Y for(4)switches 9
Mounting Kits NAMUR MOUNTING KITS Accord NAMUR Mounting Kits and NAMUR shaft options permit direct coupling of our limit switches or positioners to NAMUR actuators without a shaft adapter. Our NAMUR shaft options include alignment pins to ensure accurate fit between accessory and actuator. The kits feature stainless steel construction at an economical price. To order Kits: Specify "NAMUR Kit" and actuator make, model and size. UNIVERSAL MOUNTING KITS These non-metallic, adjustable mounting kits provide corrosion protection for severe applications. They are available for virtually all rotary actuators. To order Kits: Specify part number XP2 for our Universal kit, including (1) bracket with 1.5" center hole and (5) couplers with flats for 8mm, 10mm, 14mm, 20mm and 28mm actuator shafts. Actuator hardware not included. For custom kits including machined coupler flats and actuator hardware, consult factory. STEEL MOUNTING KITS Accord also offers a full line of steel mounting kits for any rotary actuator. These kits feature epoxy powder coating for corrosion resistance. To order: Consult factory. 10
Insofar as possible, every effort has been made to ensure that the information contained herein was correct at the time of printing. Products may differ as the result of the company policy of continuous product improvement. B00138a1 (AC-1) 01/03 Flowserve Corporation, 2003 Printed in U.S.A. 1350 North Mountain Springs Parkway Springville, Utah 84663-3004 (801) 489-8611 Fax (801) 489-2591