PRICE LIST 81. July Euros VAT not inlcuded

PRICE LIST 81 July 2015 Euros VAT not inlcuded general PRICE LIST www.m-x.eu

product summary Contents MX products summary 3-11 Recommendations for tractors & front linkages 12-197 A complete range of front loaders to answer all handling requirements MX develops and manufactures equipments & accessories to suit all needs and fit most tractors in the various handling market segments, being focused on the every day end-user satisfaction. Front linkages 198-199 Implements for loaders - Implements 200-203 - Manubal 204-207 - Feeding buckets 208-209 - Weights 210 - Brackets and interfaces 211 Implements for material handlers - Recommendations 212 - Implements 213-214 - Brackets and interfaces 215 - Mach Connectors 215 - Manubal 216-217 - Feeding buckets Loaders, front linkages & accessories for compact tractors 220-235 Loader retrofit - Individual brackets - Hydraulic control kits 218-219 236 237 T400 series range - MX T406 / T408 / T410 / T412 / T414 / T417 / T418 The loaders designed for intensive use As the latest development of the TECHNIC line, the T400 series loaders offer unequalled performance, comfort, safety and durability at work. U300 series range - MX U303 / U304 / U305 / U306 / U307 / U308 / U309 / U310 / U312 A versatile loader with or without mechanical self-leveling U300 series loaders are designed for farmers seeking a versatile and durable product for their everyday handling work. COMPACT range - MX C1 / C2 / C3u / C3+ / C3 / 30C+ Ideally suitable for the amenity tractor market With a simple & logical design based on MX fundamentals, the COMPACT loader suits your daily amenity requirements. 3 NEW MODELS Loader retrofit - Loaders - Optional equipment Retrofit couplers General Terms of Sale Loader Packs Loader technical data 238 239 240-241 242-244 245 F300 series range - MX F303 / F304 For Vineyard & orchard applications NEW RANGE The F300 loaders are the result of a taylor-made development to suit the short-wheel base tractors, offering the MX benefits & performances in spite of his compact design. 2 Contents 3

T400 series LOADERS The loader dedicated to intensive works A locking indicator visible from the cab AND from outside T400 series loaders have the FITLOCK2+ System as standard; this offers instant hitching and unhitching of the loader jib on and off the tractor. There is no room for confusion : once in the green zone, the loader is locked. In the red zone, the loader is unlocked. This permanent information on the loader locking status brings comfort and safety to the user. A wide range of versatile and durable loaders U300 series LOADERS The U300 series is the third generation of loaders with and without parallelograms, and meets all reliability and performance standards required for everyday tasks. These versatile new loaders are designed for users who need a simple and hardwearing handling tool. Hydraulic block: loader protected in forward and reverse gear The dumping rams are linked to a double pressure limiter, also known as an anti-impact valve. This new system guarantees the complete protection of the loader in forward and reverse gear (scraping). Double pressure limiter (anti-impact valves) Pivot pins for improved durability The loader pivots are now fitted with anti-rotation flat face pins, a well proven technique. Shock resistant «Sursulf» wear bushes are used on the front pivot points. forward gear PCH System patented option Self-leveling by hydraulic compensation The bucket angle is automatically retained by two hydraulic compensating rams, perfectly integrated and permanently linked with the crowd rams. Adaptive leveling Compensation rams with 2 positions to adapt the implement angle to the work being done. Bucket position Palet position Superior power The pressure in the crowd rams, generated by the weight in the implement, is transferred to the compensating rams and boost lifting ram power. PCH System increases actual lift capacity by up to 35 % without any extra energy requirements from the tractor (i.e. oil pressure or flow). Very efficient crowding The loader linkage and the size of the dumping rams have been designed to ensure an exceptional crowding angle of 71 up to a height of 1.20 metres. Ground crowding 47 Crowding at 1.20 metres +24 47 = 71 Forward gear protection With or without parallelogram (U-Link System) U300 Series loaders are available with mechanical parallelogram. Fully integrated in the loader arms, it guarantees good usability. The models equipped with a U-Link System parallelogram are the U304, U306, U308, U310 and U312. Reverse gear protection reverse gear Instant hitching and removal of the loader The FITLOCK 2+ System is a fully automatic hitching concept, which allows hitching and removal of the loader with only one single exit from the tractor cab. Twin lock mechanism Locking of the loader is fully automatic, unlocking is by a convieniently positioned lever. Now you just have to disconnect the MACH System and to lower the parking stands. Unlocking exclusive TO mx Integrated parking stands The parking stands are fully integrated into the underside of the loader arms, with a simple and effective lock/release mechanism. Automatic implement hitching With the MASTER-ATTACH System, or Euro hitch, it s enough to crowd back the implement to lock it automatically into position, thanks to a spring loaded lever cleverly located on the L.H. of the loader. Self-centering «V» A hitch that does not affect the loader performance Minimum implement overhang and maximum crowd angles have been looked after in this heavy duty frame carrier (locking pins of 30 with the M.A.) with instant connection through «V» shaped self-guiding ramps. Easy connection Equipped with ramp guides, tools are adjusting themselves on the implement carrier. Automatic locking lever Automatic hitching Locking pins «Clic» «Clac» Engage Guide It s locked 4 T400 / U300 series loaders 5

EXCLUSIVE OPTIONS OTHER OPTIONS Fully automatic hitching/unhitching of implements c/w hydraulic and option electric functions (excepted U300 series, T418, F300 series and mixed implement carriers) SPEED-LINK2 System allows inter-changeability of all implements, including those with hydraulic and electric connections without leaving the tractor seat. So no hesitation to instantly fit and use the right implement to suit your work. Comfortable A matter of seconds to change implements; no mistakes in hydraulic or electrical connections. All componentry fully protected All couplings are well protected with spring loaded covers which open & close during the (un)connecting process. MACH System option patented (not available with the ECOPILOT) Instant coupling of tractor to loader hydraulics and electric lines Simple Mach System offers a simple and effortless tractor-loader connection of all hydraulic and electric lines. Safe MACH System includes NS flat face couplers (see page 241) to care the tractor hydraulics and the environment. SHOCK Eliminator System Shock Absorber Whilst lowering the front loader, it eliminates any shocks caused by rapid frontloader movements. option With PROPILOT System, the MACH is fully integrated and supplied as standard. Without Shock Eliminator With Shock Eliminator The first wireless and portable weighing option system for front loaders (excepted U300 series) Essential to control the cattle foodstuff and material loading (cereal, fertilizer...). Always within reach The portable MPE3 is always available, in the tractor cab, on hand, in your pocket... Whatever you handle, weighing is optimal. Ideal for livestock farmers Another MX development for cattle farmers. The MPE3 includes several channels to use different implements and dedicated functions (buzzer, weight top-up...). Synchronisation of grab and bucket movements option (excepted U300 series) With the Synchro Control System (SCS ), the grab is automatically opened as the bucket dumps forward, simply activated by pressing an electronic button on the loader s joystick. ACS Activ Control System option Automatic return to implement pre-set position (included in the TECHPILOT pack) The ACS System automatically repositions the bucket to a predetermined position, with a simple press of a button. Reduces work load ACS button Ideal in repetitive operations to reposition the bucket before loading. Free time Operator s attention may be fully concentrated on tractor manoeuvering. Standard on TECHPILOT (excepted U300 series) FAST-LOCK System option (excepted mixed implement carrier) Automatic hitching and removal of non hydraulic / electric implements Added comfort to connect the right implement without leaving the tractor seat. Particularly interesting when frequent implement changes are required. FAST-LOCK button More comfort for the operator The ability to synchronize two operations (e.g. bucket dumping + opening the grab) saves 50% handling operations. More efficient time The 2d sequence (grab opening) is automatically started with one single movement of the lever. More precision at work Thanks to the synchronized cycles of the grab whilst dumping, the overall handling operation is more precise. MACH 2 patented option Instant hydraulic connection loader Strong, reliable and very easy-to-use, it enables all couplings to be connected simultaneously in one simple action, even under pressure. MACH 2 includes NS flat face couplers (see page 241) to care the tractor hydraulics and the environment. The MACH 2 box is conveniently located on the carrier to avoid any wearing of hoses between the implement and the loader. Engage implement Pull down the lever It s locked 6 Exclusive options / Other options 7

CONTROL SYSTEMS FRONT LINKAGES Double acting with maintained float position All MX control systems have double acting with a detent float position. They are designed to adjust to all types of hydraulic circuits on tractors currently available on the market. Combined multi-function movements become instinctive no matter what control system you choose. Electronic control (excepted U300 series, F300 series) Low pressure hydraulic control Double acting lowering Float position maintained at ground level Neutre Cable controls Make your tractor more productive and versatile Your technical requirement at work may depend greatly of your task in hand and the implement used. This is why, MX have developped a complete range of front linkages with 7 different models. Each one offers the best performance in line with the tractor category & horse-power. Cast-iron bottom frame It consists of a single compact piece to give outstanding resistance. It is unique on the market. A 2d adjustment position provides an extra 100 mm further height. High position Low position Front mounting board To hitch some specific front equipment (road maintenance or snow clearing - standard EN 15432-1 2011) An advanced electronic control system that uses stepper motor technology specifically developed by MX for increased accuracy. 3rd and 4th functions wiring, ACS System *, «bucket shake», flow restrictor for 3rd function and dumping are fitted standard with TECHPILOT. *ACS - Automatic return to pre-set position, see page 7. Unique to the market this is a popular upgrade. This system uses a low pressure hydraulic control lever that offers smooth, progressive and accurate control, and reduces operator fatigue. With no wearing parts it is maintenance free. Connection to the original tractor control valves MX loaders can be connected to the tractors original control valves, either mechanical or electronic. MULTI-ARM System : Multiposition adjustable monolever support NEW As control has to be comfortable in all circumstances, MX has developed the MULTI-ARM System, multiposition adjustable monolever support, the perfect complement to the ergonomic handle. Perfectly adapted to the cab space, the MX monolever support can be adjusted in three dimensions and enables six different movements: depth, height, front-rear angle, right-left angle, right-left rotation and wrist rotation. Note that the MULTI-ARM System forms a rigid assembly that moves with the seat. Its single premounted support, for fixing with two indexed handles to the armrest base, enables fast, simplified mounting by the dealer. Compatible with the TECHPILOT, the FLEXPILOT System and the PROPILOT System on T400 and U300 series loaders following tractor recommendations (see recommendation 248). A simple control system operated by conventional mechanical cables. Cost effective and basic. ECOPILOT Similar to the PROPILOT System (same joystick). However, it is not compatible with the MACH System and only offered with the U300 series loaders. Specifications Power take-off option High output and reliable option. All PTO systems have been severely tested to meet the hard working conditions. Rotation is clockwise or anti-clockwise to match the implement used. Available for tractors from 70 to 200 HP. CAUTION: For complete protection, use a torque limiter on the implement, set to the tractor s maximum torque given by the manufacturer. More versatility and more productivity of your tractor. The loader and the front linkage are using several similar components (chassis, rear supports, hydraulic components, control system, SHOCK Eliminator). The total cost of the whole unit is significantly reduced. Changing from loader to front linkage work or vice versa is done with minimum downtime R12 R10 R16 R20 R28 R38 R53 Front linkage category 1 to 2 2 Lifting power at couplers* (kg) 1200 1000 1600 2000 2800 3800 5300 Lifting power at implement center of gravity 610 mm from ball ends* (kg) 950 770 1050 1120 1800 3300 4800 Width between lifting arms (mm) 665 to 895 825 Lift arm clearance* lowest position (mm) < 200 < 200 highest position (mm) > 750 > 850 > 900 > 950 Catch hooks auto. cat 1 & 2 auto. Cat 3 S Ball ends Cat 2 Cat 3 / 2 Top link / length (mm) Cat 2 / 460 to 680 Cat 2 / 460 to 680 Power take-off (PTO)** PTO HP (according to tractor) 150 150 front shaft r.p.m. (depends on tractor) 1000 1000 standard rotation from cab clockwise clockwise PTO shaft profile (DIN 9611) 1 3/8 6 splines 1 3/8-6 splines PRICE LIST p.199 p. 199 *These are average data depending on tractor) ** This option depends on the tractor/front linkage compatibility For the specifications of COMPACT front linkages, refer to the specific section 8 Control systems / Front linkages 9

WEIGHTS WEIGHTS COMFORT RELIABILITY 4 5 6 7 8 NEW RANGE OF MULTIPURPOSE MX WEIGHTS 3 points and automatic MULTIMASS weights are equipped with a fast and automatic 3 point hitching system as standard. The choice of hitching system then depends on the work to be carried out. 4 Automatic hitching: you no longer need to attach the 3 point bar. Red indicator rod to correctly estimate the size of the weights. 5 Fast hitching in all categories Large range of lower pin vertical adjustment, with exclusive MX locking. Compatible with front and rear linkages in categories 2, 3 and 4 (pins supplied). 6 Deep lateral guide of arms (back of V weight). All MULTIMASS models are mechanically welded and fitted to the yoke for perfect impact-resistance and durability. 7 Lower pins fit to the yoke Loads are ideally spread over the entire surface, without overhang, for a safe hitching. 8 Unitary weight MULTIMASS weights are mechanically-welded and cannot break. Towing clevis fitted to the block with the pin. 10 FLEXIBILITY 11 12 1 modularity 2 3 4 More than a simple weight, the MULTIMASS is equipped with ingenious and unique storage to make farmer s lives easier. 12 2 sleeves to carry tools with 10 MULTIBOX handles (spades, brushes and forks) 168 L storage box compatible with the pr imar y weight and additional weight. Drum holder (cables, chains and hoses) 11 Chainsaw cases: the cab remains clean. DESIGN Designed for all needs, the MULTIMASS range has an exclusive progressive ballasting system. You can add 1 or 2 additional 400 kg weights to the primary weight. 1 Primary weight + additional weight Unspoiled design. 2 Quick to use Vertical interlocking system with conical end-pieces. 4 Parking support as standard Secure hitching/unhitching of the additional weights. With a range of 4 models and 12 possible configurations, add the weight you need, from 600 to 2,300 kg: MULTIMASS 400AD EXAMPLES MULTIMASS 1200 + MULTIMASS 1200 MULTIMASS 400AD 1,600 kg MULTIMASS 400AD 3 Locking with a single handle Easy access without tools. + + MULTIMASS 400AD = 2,000 kg The MULTIMASS range has rounded and smooth shapes to perfectly fit the tractor. It is available in high quality titanium grey paint, identical to the MX T400 and U300 loader series. 3 alternative colours are also available: green, grey and black. Technical specifications Multimass 600 Multimass 900 Multimass 1200 Multimass 1500 MULTIMASS a400 AD* Multibox Capacity 600 kg 900 kg 1,200 kg 1,500 kg 400 kg 168 L Width (W) 1,200 mm 1,200 mm 1,400 mm 1,400 mm 1,200 mm 1,200 mm Height (H) 500 mm 500 mm 500 mm 500 mm 500 mm 400 mm Depth (D) 585 mm 585 mm 675 mm 800 mm Overhang (F) 385 mm 385 mm 475 mm 600 mm Hitching type Category hitching 3 pts and automatic 3 pts and automatic 3 pts and automatic 3 pts and automatic cat 2 to 4 cat 2 to 4 cat 2 to 4 cat 2 to 4 PRICE p 210 *Additional weights compatible with MULTIMASS 600/900/1200/1500 + 270 mm + 380 mm H W D Technical characteristics of the weights Green spaces: refer to section F 10 Weights 11

Front linkages Push bar Extra bracing essential for high HP tractors in heavy duty applications. 3 function selector valve The 3 function selector valve makes it possible to optimize the MX front linkage operation as and whenever required : 1 - Double acting : power is required to dig into the ground 2 - Single acting : to follow the ground contours without pressuring the ground 3 - Locked : for carrying and transporting (ex.weights) It is mounted on a universal fitting support that suit any tractor rear. Power take-off For tractors from 70 to 200 HP. Clockwise rotation from the tractor cab. Only compatible with MX front linkages. Refer to us for retrofitting. External MX linkage control For easy hitching of implements. Tractor with original fitting : see recommendation142 Weight-carriers and A-frames Weight-carrier 2 types PMJ : - weight-carriers for Jerrican Standard weights PMS : - weight-carriers for tractor specific weights A-frame 2 types TU TS TU : Universal triangular weight-frame 1000 kg Can receive: - MX Jerrican weight-frame for MX Jerrican weight - MX specific weight-frame for additional tractor original weight TS : Specific triangular weight-frame can receive tractor original weight-frame. Jerrican weights on MX weight-frame Additional tractor original weights on MX specific weight-frame Additional tractor original weights on tractor original weight-carrier TU TU on TU Jerrican MX weight-carrier for Jerrican MX weights PMJ Rear supports Offering extra strength to the tractor s structure. FOCUS Front mounting board (standard EN 15432-1 2011) Standard front board to hitch snow clearance or road maintenance equipment ; to be mounted in place of the original lift arms. Only available with the front linkages MX R20, MX R28, MX R38 et MX R53. Standard Jerrican weights on TU MX specific weight-frame for additional tractor original weights PMS on TS Tractor specific weights on a MX counter weight Jerrican MX weight-carrier for Jerrican MX weights PMJ Standard Jerrican weights on a MX counter weight MX specific weight-frame for additional tractor original weights PMS TS : MX triangular weight A-frame Tractor original weight-carrier Tractor specific weights Tractor specific weights Front linkages and weights Optional equipment Front linkages (tractor with or without loader) Standard equipment : Strengthening bracket up to the clutch housing (except on tractors with chassis) - DA lift arms - Rigid & float positions - Top link - 3/2 coupling balls. Push bar and/or rear supports may be required for heavy duty applications. Front linkages for compact tractors : refer to section p.234. R S T U MX R12 D/A on tractor rear valve with couplings and on/off tap - compatible with front PTO 1950 2310 2580 - MX R10 D/A on tractor rear valve c/w T junction and on/off tap 1850 2160 2330 - MX R16 D/A on tractor rear valve c/w T junction and on/off tap 1900 2210 2410 - MX R20 D/A on tractor rear valve c/w T junction and on/off tap 1950 2340 2500 3080 MX R28 D/A on tractor rear valve c/w T junction and on/off tap 2160 2580 2720 3530 MX R38 D/A on tractor rear valve c/w T junction and on/off tap 2380 2820 2930 3750 MX R53 D/A on tractor rear valve c/w T junction and on/off tap 2650 3080 3200 4020 Rear supports (refer to recommendations) 850 Push bar - to be added to the price of the rear supports (refer to recommendations) 650 Shock absorber - Shock Eliminator on lift circuit (MX R12) 200 - Shock Eliminator on lift circuit(mx R10, MX R16, MX R20, MX R28, MX R38, MX R53) 300 - Shock Eliminator and pressure gauge on lowering circuit (MX R20, MX R28, MX R38, MX R53) 340 Hydraulics - Hydraulic kit via original tractor valve free - Hydraulic kit via Mach System (tractor fitted with MX loader) free - Hydraulic kit via MX loader valves (except ECOPILOT) free - 3 functions selector valve 160 - MX hydraulic valve + Monolever - 2 DA + Float. - Auxiliary DA feed line included 1200 - MX electro-hydraulic valve + Joystick - 2 DA/SA + Float. - External linkage control + auxiliary DA feed line included 2980 - Additional DA hydraulic line - to supply hydraulic function on implement or hydraulic top-link (from tractor valve or MX valve) 310 - Solenoid valve kit + auxiliary hydraulic valve - for an additional hydraulic function at the front 650 Front mounting board - Front mounting board - Assembled in place of MX front linkage lift arms (MX R20, MX R28, MX R38, MX R53) 980 External linkage control (at front) - On MX electro-hydraulic valve included - On Techpilot (MX loader / MX front linkage common valve) 210 - On tractor original electro-hydraulic valve (tractor with original disposition ; see recommendation142) 310 Power take-off - PTO with oil immersed multidisc clutch 1000 rpm Clockwise rotation seen from cab. Only compatible with MX front linkages. Please consult us for assembly. 2640 CAUTION: For complete protection, use a torque limiter on the implement, set to the tractor s maximum torque given by the manufacturer. A-weight frame (according to recommandations) - TU - universal 1000 kg for MX weight-frame (PMJ or PMS) 310 - TS - specific for tractor original weight-frame (specify tractor make and model) 350 Weight-frame to fit on counter weight or universal A-TU - For Standard Jerrican weight (PMJ) 160 - For original tractor weight (PMS) (specify tractor make and model) 260 Counter-weights (see description, specifications and photos pages 11 and 210) - Weight 400 kg (M400), categories 1 & 2 720 - MULTIMASS 600 (MM600) - 600 kg 1210 3 points and automatic as - MULTIMASS 900 (MM900) - 900 kg standard 1420 - MULTIMASS 1200 (MM1200) - 1200 kg Categories 2, 3 and 4 1820 - MULTIMASS 1500 (MM1500) - 1500 kg (with pins, without coupling balls) 2220 - Extra weight 400 kg (MM400AD) - (parking support included ; only compatible with the MULTIMASS range) 910 - Storage box 168L - MULTIBOX (MBX) - only compatible with the MULTIMASS range 300 Chassis S T U From front casting to clutch housing 660 870 1100 198 Front linkages 199

Implements for loaders Implements IMPORTANT : specify loader brand, model and hitch (MX or Euro) when confirming order. IMPORTANT : specify loader brand, model and hitch (MX or Euro) when confirming order. X x Recommended for loading earth, sand, gravel, slurry, etc. - maximum density 1.7 T/m 3 Tolerated for earthmoving, levelling and tearing work. Recommended for loading fertilisers, compost, woodchips, snow, etc. - maximum density 0.8 T/m 3 Not recommended for earthmoving, levelling and tearing work (off-axis loads). Digging bucket Original wearblade (hardness 300 HB), pre-drilled to take options: Options, bolted teeth or bolted counter-blade (hardness 400 HB) Integrated Euro or MX Master-Attach hitching NEW General purpose bucket Original wearing counter blade 400 HB Integrated Euro or MX Master-Attach hitching Weight (kg) Capacity (liter) BT 130 840 183 345 450 X X X X X X + Bolted counter-blade 400 HB 170 X X X X X X + Bolted teeth (5) 75 X X X X X X BT 150 950 200 400 515 X X X X X X + Bolted counter-blade 400 HB 190 X X X X X X + Bolted teeth (6) 90 x X X X X X BT 180 1090 230 480 625 X X X X X + Bolted counter-blade 400 HB 220 X X X X X + Bolted teeth (7) 105 x x X X X BT 200 1200 245 535 695 X X X X + Bolted counter-blade 400 HB 250 X X X X + Bolted teeth (7) 105 x X X BT 225 1300 265 600 780 X X X + Bolted counter-blade 400 HB 270 X X X + Bolted teeth (8) 120 x X NEW water heaped BR 180 1 140 266 605 785 x X X X X BR 200 1 250 284 675 875 x X X X BR 225 1 350 305 760 985 x X X BR 245 1460 322 825 1070 x X MX FR/ U303*/U304* MX T406/ U605*/U306* MX T408/U307*/U308* MX T410/U309*/U310* MX T412/T414/ U312* MX T417/ T418 X x Recommended for loading bovine manure, for example - maximum density 1.2 T/m 3 Recommended for loading chicken manure, for example - maximum density 0.8 T/m 33 Multipurpose bucket Versatile implement, without internal supports Integrated Euro or MX Master-Attach hitching & hoses Removable round tines Ø30mm Original wearing counter blade Optional SPEED-LINK or MACH 2 NS 1 extra D/A required plug Manure fork Curved back - top grab available Removable round tines Ø35mm Curved back with Euro or MX Master-Attach brackets Top grab for manure fork Removable round grab and side tines Ø28mm Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. Weight (kg) Capacity (liter) BMS 140 2180 325 810 x X X X X X BMS 160 2340 367 930 x X X X X BMS 180 2530 399 1050 x x X X X BMS 200 2920 423 1160 x X X X BMS 225 3370 466 1305 x X X BMS 245 3680 488 1420 x X 400 HBFactory welded wearing counter blade 320 SPEED-LINK plug 320 Side plates 120 BF 118 (6 tines) 920 128 X X X X X X GF 125 1290 110 BF 118 + GF 125 2210 238 X X X X X X BF 140 (7 tines) 1040 143 x X X X X X GF 150 1370 120 BF 140 + GF 150 2410 263 x X X X X X BF 160 (8 tines) 1140 158 x X X X X GF 170 1420 128 BF 160 + GF 170 2560 286 x X X X X BF 180 (9 tines) 1230 171 x X X X GF 190 1510 133 MX FR/ U303*/U304* MX T406/ U605*/U306* MX T408/U307*/U308* MX T410/U309*/U310* MX T412/T414/ U312* MX T417/ T418 4 in 1 bucket # Welded teeth Bolt-on Euro or Master-Attach MX hitching and hoses Optional SPEED-LINK or MACH 2 NS plug BQU 150 3400 370 320 420 x X X X X X BQU 180 3620 415 385 500 x x X X X 1 extra D/A required Manure fork + top grab Euro or MX Master-Attach brackets Optional SPEED-LINK or MACH 2 NS plug BF 180 + GF 190 2740 304 x X X X BF 200 (10 tines) 1330 185 X X X GF 205 1580 140 BF 200 + GF 205 2910 325 X X X BQU 210 3860 470 450 585 x X X BF 225 (11 tines) 1480 200 x X X GF 225 1650 147 SPEED-LINK plug 320 BF 225 + GF 225 3130 347 x X X 1 extra D/A required Extra-cost for specific hitching (see page 25) 100 1 extra D/A required SPEED-LINK plug 320 *For U300 series loaders, the tools listed are recommended for a maximum density of 0.8, but cannot be used on tractors without rear supports (except BR) - specificity 177. # Implements available for other makes of front loaders, of similar power to the MX front loaders *For U300 series loaders, the tools listed are recommended for a maximum density of 0.8, but cannot be used on tractors without rear supports (except BR) - specificity 177. 200 Implements for loaders 201

Implements for loaders Implements IMPORTANT : specify loader brand, model and hitch (MX or Euro) when confirming order. x Recommended for loading grain, compost, wood chips, snow, etc. - maximum density T/m 3 Not recommended for earthmoving, levelling and tearing work (off-axis loads). High capacity grain bucket No teeth Original wearing counter blade Curved back with Euro or MX Master-Attach brackets High-tip bucket # Provides an extra 1.10 m height beyond the maximum loader lift height Bolt-on Euro or Master-Attach MX hitching and hoses Original wearing counter blade Optional SPEED-LINK or MACH 2 NS plug 1 extra D/A required Silage bucket # 3 different silage systems available Bolt-on Euro or Master-Attach MX hitching and hoses Optional SPEED-LINK or MACH 2 NS plug 1 extra D/A required Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. Palet carrier c/w forks FEM 2A komologated forks - recommended parallelogram Adjustable fork spacing (crenellated deck) Width : 1245 mm / Height : 780 mm Loading backplate as standard Integrated Euro or Master-Attach MX hitching Weight (kg) Capacity (liter) water heaped BC 180 1 530 315 990 1300 x x x x BC 200 1 630 335 1100 1450 x x x BC 220 1 780 355 1200 1600 x x x BC 250 1 940 390 1370 1825 x x BRDS 180 3640 470 1000 1300 x x x x BRDS 210 3930 510 1200 1550 x x x BRDS 250 4200 570 1370 1800 x x SPEED-LINK plug 320 Extra-cost for specific hitching (see page 211) 100 BCA 210 + doigts fixes 2610 450 1050 1400 x x x x BCA 210 + griffe 3630 490 1050 1400 x x x x BCA 210 + rotor 4930 580 1050 1400 x x x SPEED-LINK plug 320 Extra-cost for specific hitching (see page 211) 100 MX FR/ U303*/U304* MX T406/ U605*/U306* MX T408/U307*/U308* Log grab Sugar cane, branches, seaweeds Integrated Master-Attach MX hitching Incompatible with Euro hitching and SPEED-LINK MX T410/U309*/U310* MX T412/T414/ U312* MX T417/ T418 Optional MACH 2 NS plug +100 IMPORTANT : specify loader brand, model and hitch (MX or Euro) when confirming order. X Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. Recommended for loading earth, sand, gravel, bovine manure, etc - maximum density 1.2 T/m 3 Tolerated for light earthmoving and levelling work. Implements for light works General purpose bucket Original wearing blade 150 x 16 mm Curved back C/w Euro or MX Master-Attach brackets Manure fork Ø 35 x 860 mm tines Flat back C/w Euro or MX Master-Attach brackets Combined top grab Ø 35 x 860 mm tines ; Ø 28 mm for the grab Flat back C/w Euro or MX Master-Attach brackets 1 extra D/A required Silage blade # Front blade with parking stands 3pt linkage inclusive x Weight (kg) Capacity (liter) water heaped T400 series loaders Hoisting hook Capacity of 2500 kg Integrated Master-Attach MX hitching U300 series loaders FR MX T406 MX T408 MX T410 MX T412/T414 MX T417 /T418 MX U303/U304 MX U305/U306 MX U307/U308 MX U309/U310 MX U312 BRU 150 800 175 470 625 x x x + x x X x x BRU 180 880 196 565 750 x x x x X X x BRU 200 990 208 630 840 x x X X X BRU 225 1130 212 708 945 x X X BFU 120 (6 tines) 760 100 - x x x x X x x x BFU 140 (7 tines) 830 115 - x x x x x x X x x BFU 160 (8 tines) 890 130 - x x x x X X x BFU 180 (9 tines) 980 145 - x x x X X CGU 120 (6 tines) 1990 170-515 x x x x X x x x CGU 140 (7 tines) 2080 195-600 x x x x x x X x x CGU 160 (8 tines) 2190 215-685 x x x x X X x CGU 180 (9 tines) 2290 240-765 x x x X X CGU 200 (10 tines) 2430 265-850 x x X Recommended for loading grain, fertilisers, compost, chicken manure, wood chips, snow, etc. - maximum density 0.8 T/m 3 Not recommended for earthmoving, levelling and tearing work (off-axis loads). TR 1650 (80 x 40 x 1 000 mm) 1650 kg (capacity given at 600 mm in front of the forks) TR 2500 (100 x 45 x 1 200 mm) 2500 kg (capacity given at 600 mm in front of the forks) GV 1 extra D/A required Kit 2 doigts supplémentaires 1090 1200 2850 400 Weight (kg) 170 195 350 Loader recommendations From MX F303/F304/U303/U304 From MX T408/U307/U308 +Lift/dump safety kit required Min. distance : 104 mm - maxi. : 1085 mm *For U300 series loaders, the tools listed are recommended for a maximum density of 0.8, but cannot be used on tractors without rear supports (except BR) - specificity 177. # # Implements available for other makes of front loaders, of similar power to the MX front loaders Implements available for other makes of front loaders, of similar power to the MX front loaders 202 Implements for loaders 203 Optional MACH 2 NS plug +100 LE 250 for front linkage LE 250 for MX loader Extra-cost for specific hitching (see p. 25) CL 2500 1580 1900 100 450 Weight (kg) 360 360 130 Loader recommendations From MX T410/U309/U310 From MX F303/F304/U303/U304 +Lift/dump safety kit required

Implements for loaders Manubal IMPORTANT : specify loader brand, model and hitch (MX or Euro) when confirming order. IMPORTANT : specify loader brand, model and hitch (MX or Euro) when confirming order. Manubal L40 for Euro or Master-Attach MX front loaders For round and square bales 2 fixed tines of Ø 35 x 1 050 mm (working length) Fixed spacing between tines : 820 mm C/w Euro or Master-Attach MX brackets MANUBAL L40 (weight : 50 kg) 380 Short tines (710 mm working length) available in place of standard tines; specify when placing order. No extra function required Manubal L500 for Euro or Master-Attach MX front loaders Handles maxi. 2 round bales or 3 square bales (80/90 cm) 2 tines of Ø 40 x 1 000 mm working length, 3 positions available : rigid, floating or transport Fixed spacing between tines : 760 or 1250 mm Height without back rest extension : 950 mm Height with back rest extension (option) : 2080 mm IC/w Euro or Master-Attach MX brackets MANUBAL L500 (weight without back rest extension : 120 kg) 850 Back rest extension 110 Short tines (800 mm working length) or long tines (1200 mm working length) available in place of standard tines; specify when placing order. No extra function required Manubal L6000 for all makes of front loaders equal to MX T410 power or higher Handles maxi. 3 round bales or 4 square bales (80/90 cm) 3 tines of Ø 40 x 1000 mm working length, 3 positions available : fixed, floating or transport Tines are fixed on a pivoting base predisposed to receive until 5 tines External center distance : 1700 mm Height without back rest extension : 1240 mm Height with back rest extension (option) : 2750 mm Bolt-on Euro or Master-Attach MX hitching and hoses MANUBAL L6000 (weight without options : 280 kg) 1500 Removable back rest extension, adjustable for height (between 2350 and 2750 mm) 270 with 2 retaining spikes, adjustable for height and length (560 mm maxi) Additional tine (Ø40 x 1000 mm working length) 5 tines maximum 70 4 L500 with height extension 5 L6000 with options of height extension and two additional tines 6 Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. Manubal C40 4 bales for all makes of front loaders equal to MX T406 power or higher For plastic-wrapped silage bales of Ø 0.90 to 1.80 m, weight up to 1200 kg 2 mobile clamping arms with synchronized opening/closing Multi-position rear support bars to perfectly hold the bale regardless of diameter Width : 1350 mm Standard non return valve Bolt-on Euro or Master-Attach MX hitching and hoses Optional SPEED-LINK or MACH 2 NS plug MANUBAL C40 (weight : 245 kg) 1940 POWER CONTROL SYSTEM Adjust the grip to the weight, density and size of the bale SPEED-LINK plug 320 Extra cost for specific hitching 100 White or grey FAUCHEUX/BAAS/TRIMA/PIN TYPE IMPLEMENT HITCHING FOR EVERY MAKE OF LOADERS 1 extra D/A required - Minimum front loader lifting height: 3.60 m at pivot Manubal V40 4 bales for all makes of front loaders equal to MX T406 power or higher For round bales of Ø 0.90 to Ø 1.80 m or square bales (double kinematics) Synchronized opening/closing of the claws as standard Compact (overall height : 1.05 m) 6 tine -grab (height : 800 mm) Bolt-on Euro or Master-Attach MX hitching Optional SPEED-LINK or MACH 2 NS plug MANUBAL V40 (weight without options : 160 kg) 1630 Quick fit wrapped bale kit (Ø 1.10 à Ø 1.60 m, 800 kg); see p. 207 570 Just a few seconds to fit or remove - no tools required Floating bale spike kit (2 x Ø 40 x 950 mm working length), adjustable spacing; see p. 207 350 SPEED-LINK plug 320 Extra cost for specific hitching 100 White or grey FAUCHEUX/BAAS/TRIMA/PIN TYPE IMPLEMENT HITCHING FOR EVERY MAKE OF LOADERS 1 extra D/A required - Minimum front loader lifting height: 3.45 m at pivot 140 4 4 BALE WEIGHT UP TO 1200 kg POWER CONTROL SYSTEM (option) Extra cost for specific hitching White or grey FAUCHEUX/BAAS/TRIMA/PIN TYPE IMPLEMENT HITCHING FOR EVERY MAKE OF LOADERS Short tines (800 mm working length) or long tines (1200 mm working length) available in place of standard tines; specify when placing order. No extra function required Manubal C30 3 bales for all makes of front loaders equal to MX T303 power or higher For plastic-wrapped silage bales of Ø 0.80 to 1.45 m, weight up to 800 kg 2 mobile clamping arms Width : 1180 mm Integrated Euro or Master-Attach MX hitching Optional MACH 2 NS plug MANUBAL C30 (weight : 135 kg) 1450 1 extra D/A required - Minimum front loader lifting height: 3.50 m at pivot New 100 3 BALE WEIGHT UP TO 800 kg Manubal V50 5 bales for all makes of front loaders equal to MX T408 power or higher For round bales of Ø 0.90 to Ø 1.80 m or square bales (double kinematics) Synchronized opening/closing of the claws as standard 2 mast positions, no need to leave the cab (lifting up to 850 mm) 3 rd function on the loader is sufficient (no addtional spool valve required) Patented locking and unlocking system PATENTED To stack 5 bales easily Bolt-on Euro or Master-Attach MX hitching and hoses Optional SPEED-LINK or MACH 2 NS plug MANUBAL V50 (weight without options : 195 kg) 2250 Quick fit wrapped bale kit (Ø 1.10 to Ø 1.60 m, 800 kg); see p. 207 570 Just a few seconds to fit or remove - no tools required Floating bale spike kit (2 x Ø 40 x 950 mm working length), adjustable spacing; see p. 207 350 SPEED-LINK plug 320 Extra cost for specific hitching 100 White or grey FAUCHEUX/BAAS/TRIMA/PIN TYPE IMPLEMENT HITCHING FOR EVERY MAKE OF LOADERS 5 1 extra D/A required - Minimum front loader lifting height: 3.85 m at pivot Implements available for other makes of front loaders, of similar power to the MX front loaders Implements available for other makes of front loaders, of similar power to the MX front loaders 204 Implements for loaders 205

Implements for loaders Manubal IMPORTANT : specify loader brand, model and hitch (MX or Euro) when confirming order. Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241 Manubal V500 5 bales for all makes of front loaders equal MX T410 power or higher For round bales of Ø 0.90 to Ø 1.80 m or square bales (double kinematics) Synchronized opening/closing of the claws as standard Big grab with 8 tines (height 1.50m) Handle 2 round bales or 3 square bales at the same time Manubal W500 5 bales for all makes of front loaders equal MX T410 power or higher For round bales of Ø 0.90 to Ø 1.80 m or square bales (double kinematics) Synchronized opening/closing of the claws as standard 2 claws operate independently, 1 after the other A sensor plate to detect the 2nd bale as standard Only one hydraulic function is required to operate the grab Manubal V7000 only for T417 und T418 front loaders For round bales of Ø 0.90 to Ø 1.80 m or square bales (double kinematics) Synchronized opening/closing of the claws as standard Very big grab with 14 tines (height 2.55 m) Handle 3 round bales or 4 square bales at the same time 3 pivoting lower tines (Ø40x1000mm) as standard Bumper on top of the Manubal to push the bales Bolt-on Euro or Master-Attach MX hitching and hoses MACH 2 NS plug MANUBAL V7000 (weight without options : 760 kg) 4450 Floating bale spike kit (Ø 40 x 1000 mm working length) 70 5 spikes maxi. SPEED-LINK plug 320 Short tines (800 mm working length) or long tines (1200 mm working length) available in place of standard tines; specify when placing order. Implements available for other makes of front loaders, of similar power to the MX front loaders Bolt-on Euro or Master-Attach MX hitching and hoses Optional SPEED-LINK or MACH 2 NS plug MANUBAL W500 (weight without options : 245 kg) 2 790 Quick fit wrapped bale kit (Ø 1.10 to Ø 1.60 m, 800 kg); see p. 207 570 Just a few seconds to fit or remove - no tools required Floating bale spike kit (2 x Ø 40 x 950 mm working length), adjustable spacing; see p. 207 350 SPEED-LINK plug 320 Extra cost for specific hitching 100 White or grey FAUCHEUX/BAAS/TRIMA/PIN TYPE IMPLEMENT HITCHING FOR EVERY MAKE OF LOADERS Independent operation of the 2 claws is possible. To be specifi ed when ordering In this case, requires hydraulic system: 2 D/A function 1 D/A function both claws and 2 D/A for independant claws required Minimum front loader lifting height: 3.60 m at pivot Bolt-on Euro or Master-Attach MX hitching Optional SPEED-LINK or MACH 2 NS plug MANUBAL V500 (weight without options : 220 kg) 2120 Floating bale spike kit (2 x Ø 40 x 950 mm working length), adjustable spacing; see p. 207 350 Additional inferior spike kit (1 x Ø 40 x 950 mm working length) 175 SPEED-LINK plug 320 Extra cost for specific hitching White or grey FAUCHEUX/BAAS/TRIMA/PIN TYPE IMPLEMENT HITCHING FOR EVERY MAKE OF LOADERS 1 extra D/A required - Minimum front loader lifting height: 3.60 m at pivot 100 V500 with lower tine kits (2+1 tines) 5 5 6 IMPORTANT : specify loader brand, model and hitch (MX or Euro) when confirming order. Manubal V60 patented 6 bales for all makes of front loaders equal MX T406 power or higher For all bales Ø0.90 to Ø1.80 m 6 tines grab (height : 800 mm) Synchronized opening/closing of the claws as standard Double acting tilt and turn ram Lift up to 650 kg with added lift of 2.50 m Hydraulic hoses included Bolt-on Euro or Master-Attach MX hitching and hoses Optional SPEED-LINK or MACH 2 NS plug Minimum front loader lifting height: 3.50 m at pivot points Loader must be equipped with a self levelling parallelogram A 3rd and a 4th hydraulic functions are necessary on the loader MANUBAL V60 (weight without options : 350 kg) 2990 206 Implements for loaders 207 Flow restrictor for MX loader (mandatory if the loader in service not equipped) 130 Quick fit wrapped bale kit (Ø 1.10 to Ø 1.60 m, 800 kg); see p. 207 570 Just a few seconds to fit or remove - no tools required SPEED-LINK plug 320 Extra cost for specific hitching 100 White or grey FAUCHEUX/BAAS/TRIMA/PIN TYPE IMPLEMENT HITCHING FOR EVERY MAKE OF LOADERS If loader only equipped with a 3rd function 4 rd function on MX loader see page 239 4 rd function on implement (MANUBAL) see page 239 Spike kit (1) 2 lower tines (Ø40 x 950 mm) optimise the use of the Manubal and allow easier manoeuvring of bales in the field. Unique, with 3 positions for the tines : rigid, floating and folding. Grab opening from 0.60 to 1.10m. MANUBAL V options 60 cm 110 cm 350 (1) except Manubal V60 (2) except Manubal V500 6 Wrapped silage bale kit (2) Kit provides soft hands to handle wrapped bales. From Ø0.90 to Ø1.60m and 800 Kg. This kit makes the Manubal even more versatile. Move from tines to soft hands in seconds. No tools required. 570

Implements for loaders Feeding buckets Single door OPTIMIZED Double door OPTIMIZED Default dumping to the left (request right hand side dumping when placing your order). The main dumping side is from the perspective of the driver s seat in the tractor s direction of travel. BD 1202 BD 1402 BD 2002 BD 2402 SPECIFICATIONS Inside width mm Outside width mm Level capacity l. Heaped capacity l. Weight kg (without options) MX T408 loader and over and other loaders of equal power 3 pt. rear linkage 2 110 2 150 900 1 200 510 mx T410 loader and over and other loaders of equal power 3 pt. rear linkage mx T410 loader and over and other loaders of equal power 3 pt. rear linkage 3 pt. rear linkage only STANDARD BUCKET 1 extra D/A function required 4910 5250 5610 7610 Implement hitching Euro or Master-Attach MX Euro or Master-Attach MX Euro or Master-Attach MX 3 pt. rear linkage Extra for implement hitching for other makes of loaders 100 100 100 - Fixed silage tines 8 TINES 9 TINES 9 TINES 9 TINES 440 500 500 500 Hydraulic silage top grab GBDF 1200 GBDF 1400 GBDF 2000 GBDF 2400 1 D/A or 1 electro-valve required 1 460 1530 1570 1740 opening (m) number of tines size of tines (mm) 1,27 10 Ø 28 x 560 2 440 2 480 1 040 1 400 565 1,27 12 Ø 28 x 560 2 440 2 480 1 500 2 000 680 1,50 12 Ø 28 x 560 2 440 2 480 1 800 2 400 705 1,95 11 Ø 30 x 760 Mobile rotor patented RR 1200 RR 1400 RR 2000 RR 2400 1 D/A or 1 electro-valve required 2760 3150 3 450 3 650 number of rams 1 1 1 2 these rams do not need an extra hydraulic function they work in conjunction with the rotor Electro-valve on bucket 410 410 410 410 Agitators AG 1400 AG 1400 AG 2400 AG 2400 Anti clog system, for more even distribution 440 440 670 670 number of discs 3 3 3 3 Baffle plate DM 1200 DM 1400 DM 2400 DM 2400 Not compatible with agitators 650 680 730 730 Root cutter assembly fodder beet - 13 blades - CR13 includes fixed cutter and rotary cutter 620 620 620 620 potatoes - 20 blades - CR20 includes fixed cutter and rotary cutter 690 690 690 690 Extra rotary cutter fodder beet 230 230 230 230 potatoes 280 280 280 280 Wearing counter blade Factory welded 360 400 400 included Hydraulics required Loader c/w 2 functions ON LOADERS See prices page 251 Loader c/w 3 functions Loader c/w 4 functions FOCUS... ON 3 PT. REAR LINKAGE 3 pt. linkage (rear tractor valves required) Standard bucket 3 rd function OK OK 1 SA + 1 DA Bucket with top grab or mobile rotor Solution A 3 rd + 4 th function 4 e function on loader 3 Solution B rd function on loader 4 e function & 4 th function on feeding bucket** on feeding bucket (BD)** OK *If fitted on original valves with mechanical control: +110 / If fitted on original valves with electrical control: see tractor specifications **4 th function electro-valve on bucket = 410 OK 1 SA + 2 DA 1 SA + 1 DA + electro-valve on bucket* 410 SPECIFICATIONS Inside width mm Outside width mm Level capacity l. Heaped capacity l. Weight kg (without options) BD 1402 BD 2002 BD 2402 mx T410 loader and over and other loaders of equal power 3 pt. rear linkage 2 440 2 480 1 040 1 400 565 mx T410 loader and over and other loaders of equal power 3 pt. rear linkage 2 440 2 480 1 500 2 000 680 3 pt. rear linkage only STANDARD BUCKET 1 extra D/A function required 6950 7340 9330 Implement hitching Euro or Master-Attach MX Euro or Master-Attach MX 3 pt. rear linkage Extra for implement hitching for other makes of loaders 100 100 - Fixed silage tines 9 DGTS 9 DGTS 9 DGTS 500 500 500 Hydraulic silage top grab GBDF 1400 GBDF 2000 GBDF 2400 1 D/A or 1 electro-valve required 1 530 1 570 1 740 opening (m) number of tines size of tines (mm) 1,27 12 Ø 28 x 560 1,50 12 Ø 28 x 560 1,95 11 Ø 30 x 760 Mobile rotor patented RR 1400 RR 2000 RR 2400 1 D/A or 1 electro-valve required 3150 3 450 3 650 number of rams 1 1 2 these rams do not need an extra hydraulic function they work in conjunction with the rotor Electro-valve on bucket 410 410 410 Agitators AG 1400 AG 2400 AG 2400 Anti clog system, for more even distribution 440 670 670 number of discs 3 3 3 Baffle plate DM 1400 DM 2400 DM 2400 Not compatible with agitators 680 730 730 Root cutter assembly consult us Wearing counter blade Factory welded 400 400 included Grass silage kit 3 PT. REAR LINKAGE (Feeding Bucket only) Including crowd ram (Master-Attach is required) SA function required Default prioritary dumping to the left (request right hand side dumping when placing your order). The main prioritary dumping side is from the perspective of the driver s seat in the tractor s direction of travel. BD 1202 BD 1402 BD 2002 2 440 2 480 1 800 2 400 705 140 140 140 1090 BD 2402 included 208 Implements for loaders 209

Implements for loaders Weights, implement brackets and interfaces Implement brackets and interfaces NEW RANGE OF MULTIPURPOSE MX WEIGHTS 3 points and automatic To fit other makes of implements on the MX loaders or MX attachements on other loaders. modularity comfort reliability FLEXIBILITY DESIGN - Fast hitching of 1 to 2 additional 400 kg weights - Parking support included - Easy locking with central handle - Unitary weight - Lower pins fit to yoke - Integrated towing clevis with Ø30 mm pin and safety locking pin - Storage sleeves for tools with handles - Drum holder - Chainsaw cases - MULTIBOX: large 168 L storage case, optional - 3 point automatic hitching of the primary weight - Compatible with category 2, 3 and 4 linkages - Lateral and deep arm guides - Lower Ø28 mm pins and Ø25 mm bracket pins with locking pins supplied (without coupling balls) - Red indicator rod - Modern design - Matt and grained MX titanium grey colour as standard - 3 other colours available: black, grey and green Brackets MASTER-ATTACH (MX) On MX loader for MX implements Bolt-on brackets 320 MASTER-ATTACH (MX) On MX loader for other makes of implements Weld-on brackets Specify curved or flat back implement 280 MX MX MX Other brands EURO On Euro loader for MX implements Bolt-on brackets 320 Euro MX Choose your weight according to your needs, up to 2,300 kg Specific hitching White or grey FAUCHEUX/BAAS/TRIMA/PIN TYPE IMPLEMENT HITCHING FOR EVERY MAKE OF LOADERS Bolt-on brackets 420 MULTIMASS 600 MULTIMASS 900 MULTIMASS 1200 MULTIMASS 1500 Interfaces MX Master-Attach loader and Euro implement Euro OPTIONS and/or or MULTIBOX MULTIMASS 400 AD MULTIMASS 400 AD x2 x1 Semi-automatic locking 450 MX Euro loader and MX Master-Attach implement Semi-automatic locking 450 Euro MX Reference Capacity Box width (L) Box height (H) Box depth (P) Overhang (F) MULTIMASS 600 MM600 600 kg 1200 mm 500 mm 585 mm 385 mm 1210 MX Master-Attach loader and ALO3 implement Semi-automatic locking 450 MX Alo3 H P F MULTIMASS 900 MM900 900 kg 1200 mm 500 mm 585 mm 385 mm 1420 MULTIMASS 1200 MM1200 1200 kg 1400 mm 500 mm 675 mm 475 mm 1820 MULTIMASS 1500 MM1500 1500 kg 1400 mm 500 mm 800 mm 600 mm 2220 MX Master-Attach loader and TENIAS implement Semi-automatic locking 450 MX Tenías L MULTIMASS 400AD * + parking support Storage box MULTIBOX MM400AD 400 kg 1200 mm 500 mm +270 mm 910 MBX 168 Litres 1200 mm 400 mm +380 mm 300 All MULTIMASS weights are compatible with category 2, 3 and 4 linkages. *Additional weights compatible with MULTIMASS 600/900/1200/1500. 210 Implements for loaders 211

Implements for handlers Implements Recommendations Only the brands recommended on this page are supplied by MX. water capacity 0000 L 0000 L heaped capacity Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. Handler make or mini-handler CATERPILLAR TH62 serial nb < 4TM4014 TH63 serial nb < 5WM6021 TH82 serial nb < 4JN1510 TH83 serial nb < 3RN4015 TH220 B TH220 B Agripac TH330 B TH330 B Agripac TH360 B TH210 TH215 TH216 TH255 TH336 TH337 TH406 TH407 CLAAS Precise serial number. Precise type of carrier : yellow, black or JD. Precise type of carrier : yellow, black or JD. Precise type of carrier : yellow, black or JD. Pressure limiter required NO NO YES Balance valve mandatory YES YES RANGER NO NO SCORPION 6030 SCORPION 6040 SCORPION 7030 SCORPION 7040 SCORPION 7045 SCORPION 9040 TARGO série K YES NO JCB ROBOT 520S 526S 526-56 528S 515-40 520-40 520-50 524-50 525-50 520-55 526-55 527-55 Série 58 535-60 536-60 Série 67 528-70 530-70 531-70 536-70 540-70 541-70 Série 95 520 525 530 532 à 540 530S(XL) à 540S(XL) TM 170 TM 220 AGRI TM 270 TM 300 TM 310 Precise type of carrier : - Skid loader : y=463mm - Quick-Hitch : y=247,5mm - Quick-Fit : y=630mm - Petit tablier : y=490mm y YES Contact us NO NO Handler make or mini-handler MANITOU Pressure limiter required Balance valve mandatory MANISCOPIC YES NO MERLO 30.6 MULTIFARMER 30.9 MULTIFARMER 34.7 34.10 36.7 36.10 37.10 38.10 40.7 41.7 P23.6 P25.9 P26.6 P27.7 P28.7KT P28.8 PLUS/L P28.8 TOP P28.9KT P30.7 P30.7KT P30.9KT P32.6 PLUS P32.6 TOP P33.7KT P34.7KT P34.7 PLUS P34.7 TOP P34.10 PLUS P34.10 TOP P35.7KT P36.7 PLUS P36.7 TOP P36.10 TOP P37.10 P38.10 P40.7 P41.7 P40.8K P40.9K SCHÄFFER 460T 470T 6370T 6390T 9310T 9330T 9530T NO YES YES NO Multi-purpose bucket Factory fitted wearing blade (400 HB) standard side plates Customised and integral welded attachment bracket Couplings supplied weight empty BMSA 230 # Flat tines (9) 1350 L 755 kg 3990 BMSA 245 # Flat tines (9) 1750 L 850 kg 4160 1 extra D/A function required Combi grab Specify the tines required when ordering 10 curved tines and 10-cranked tines Ø45 x 1000 mm Customised attachment bracket: bolt-on, it can be adapted to all makes Couplings supplied weight empty CGA 230 # (10 tines) GDPA grab - Flat tines (8) 1500 L 570 kg 4310 CGA 230 # (10 tines) GDRA grab - Loose round tines (12 front tines Ø 30 mm - 4 side tines Ø 28 mm) 570 kg 4580 CGA 250 # (11 tines) GDPA grab - Flat tines (10) 1700 L 630 kg 4630 CGA 250 # (11 tines) GDRA grab - Loose round tines (13 front tines Ø 30 mm - 4 side tines Ø 28 mm) 630 kg 4900 1 extra D/A function required High capacity bucket Reversible bolted 400 HB wearblade cap retainer Customised and integral welded attachment bracket NEW NEW weight empty BCA 230 1730 L 2250 L 635 kg 2650 BCA 245 2150 L 3010 L 710 kg 2830 Options for implements in use - Regulating valve compulsory for some makes of material handlers - Pressure limiter compulsory for some makes of material handlers 210 130 # - Regulating valve compulsory for some makes of material handlers (see recommendations page 212) Included - Pressure limiter compulsory for some makes of material handlers (see recommendations page 212) 212 Implements for material handlers 213

Implements for handlers Implements water capacity 0000 L 0000 L heaped capacity Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. INTERFACE FOR TELEHANDLER / LOADER IMPLEMENT MASTER-ATTACH MX Silage bucket Customised attachment bracket: bolt-on, it can be adapted to all makes Couplings supplied weight empty BCA 210 + 8 silage fixed tines 380 kg 2640 BCA 210 + GBDF 1200 # silage top grab 470 kg 3830 BCA 210 + RR 1200 # silage mobile rotor 540 kg 5130 Optional factory fitted wearing blade 210 320 BCA 240 + 9 silage fixed tines 610 kg 3480 BCA 240 + GBDF 2400 # silage top grab 790 kg 4890 BCA 240 + RR 2400 # silage mobile rotor 800 kg 6800 Optional factory fitted wearing blade 240 340 Mobile rotor (patented) with 1 or 2 rams Tilt rams do not require an extra function (tilt ram connected to the rotor) 1 extra D/A function required Outils chargeur MX Interface Attelage automoteur Simple quick device for converting your telescopic handler apron into an MX Master-Attach implement carrier and suited to the occasional use of MX loader implements. interface Interface c/w bracket (specify make and model of telehandler) 860 Interface only 510 Telehandler interface only (specify make and model of telehandler) 350 MX implement handler bracket Regulating valve and/or pressure limiter required for implements equipped with a grab (see recommendations p.212) Earth bucket 8 welded teeth Customized bolt-on attachement bracket; it can be adapted to all makes weight empty BTA 230 1050 L 1400 L 420 kg 2250 Options for implements in use Regulating valve 210 Pressure limiter 130 MACH Connectors Instant hydraulic connection Pallet carrier and forks Forks 100 x 45 x 1200 mm, floating or rigid, with side adjustment Customized bolt-on attachement bracket; it can be adapted to all makes weight empty TR 3000 kg 295 kg 2040 At 500 mm payload Min. distance : 550 mm - maxi. : 1340 mm MACH 2 - Kit for material handler (50L/min NS version) Box only c/w support 320 Plug 100 MACH 4 - Kit for material handler (50L/min NS version) Box only c/w support 540 Plug 180 ASK FOR THE COMPLETE MACH Connectors PRICE LIST # - Regulating valve compulsory for some makes of material handlers (see recommendations page 26) Included - Pressure limiter compulsory for some makes of material handlers (see recommendations page 26) 214 Implements for material handlers 215

Implements for handlers Manubal Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241 Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241 Manubal L6000 Handles maxi. 3 round bales or 4 square bales (80/90 cm) 3 tines of Ø 40 x 1000 mm working length, 3 positions available : fixed, floating or transport Tines are fixed on a pivoting base predisposed to receive until 5 tines External center distance : 1700 mm Standard back rest extension (removable and adjustable for height from 2350 bis 2750 mm) 2 retaining spikes fixed on the back rest (adjustable for height and length; 560 mm maxi.) Customised attachement bracket: bolt-on, it can be adapted to all makes MANUBAL L6000 with back rest extension (weight without options : 280 kg) 1800 Additionnal tine (Ø40 x 1000 mm working length) 5 tines maxi. Short tines (800 mm working length) or long tines (1200 mm working length) available in place of standard tines; specify when placing order. No extra function required 70 Manubal V500 For all bales Ø0.90 to Ø1.80m (double kinematics) Synchronised opening of the claws as standard Big grab with 8 tines (height 1.50m) Handle 2 round bales or 3 square bales at the same time Customised attachement bracket: bolt-on, it can be adapted to all makes Hydraulic hoses included Optional MACH 2 NS plug MANUBAL V500 # (weight without options : 220 kg) 2320 Floating bale spike kit (2 x Ø 40 x 950 mm working length), adjustable opening; see p. 207 350 Additional inferior spike kit (1 x Ø 40 x 950 mm working length) 175 1 extra D/A function required Manubal C40 For plastic-wrapped silage bales of Ø 0.90 to 1.80 m, weight up to 1200 kg 2 mobile clamping arms with synchronized opening/closing Multi-position rear support bars to perfectly hold the bale regardless of diameter Width : 1350 mm Standard non return valve (equivalent to a balance valve) Standard Power Control System (equivalent to an adjustable pressure limitor) Customised attachement bracket: bolt-on, it can be adapted to all makes Hydraulic hoses included Optional MACH 2 NS plug MANUBAL C40 (weight without options : 245 kg) 2110 1 extra D/A function required BALE WEIGHT UP TO 1200 kg Manubal W500 For all bales Ø0.90 to Ø1.80m (double kinematics) Synchronised opening of the claws as standard 2 claws operate independently, 1 after the other A sensor plate to detect the 2nd bale as standard Only one hydraulic function is required to operate the grab Customised attachement bracket: bolt-on, it can be adapted to all makes Hydraulic hoses included Optional MACH 2 NS plug MANUBAL W500 # (weight without options : 245 kg) 2990 Floating bale spike kit (2 x Ø 40 x 950 mm working length), adjustable opening; see p. 207 350 Quick fit wrapped bale kit (Ø 1.10 to Ø 1.60 m, 800 kg) ; see p. 207 570 Just a few seconds to fit or remove - no tools required Independent operation of the 2 claws is possible. To be specified when ordering In this case, requires hydraulic system: 2 D/A function 1 D/A function both claws and 2 D/A for independant claws required Manubal V40 For all bales Ø0.90 to Ø1.80m (double kinematics) Synchronised opening of the claws as standard Compact (overall height 1.05m) 6 tines (height 800mm) to handle 1 or 2 bales at the same time Customised attachement bracket: bolt-on, it can be adapted to all makes Hydraulic hoses included Optional MACH 2 NS plug MANUBAL V40 # (weight without options : 160 kg) 1830 Floating bale spike kit (2 x Ø 40 x 950 mm working length), adjustable opening; see p. 207 350 Quick fit wrapped bale kit (Ø 1.10 to Ø 1.60 m, 800 kg) ; see p. 207 570 Just a few seconds to fit or remove - no tools required 1 extra D/A function required Manubal V7000 only for T417 und T418 front loaders For round bales of Ø 0.90 to Ø 1.80 m or square bales (double kinematics) Synchronized opening/closing of the claws as standard Very big grab with 14 tines (height 2.55 m) Handle 3 round bales or 4 square bales at the same time 3 pivoting lower tines (Ø40x1000mm) as standard Bumper on top of the Manubal to push the bales Bolt-on Euro or Master-Attach MX hitching and hoses MACH 2 NS plug MANUBAL V7000 (weight without options : 760 kg) 4650 Floating bale spike kit (Ø 40 x 1000 mm working length) 5 spikes maxi. 70 Short tines (800 mm working length) or long tines (1200 mm working length) available in place of standard tines; specify when placing order. # - Regulating valve compulsory for some makes of material handlers (see recommendations page 212) Included - Pressure limiter compulsory for some makes of material handlers (see recommendations page 212) # - Regulating valve compulsory for some makes of material handlers (see recommendations page 212) Included - Pressure limiter compulsory for some makes of material handlers (see recommendations page 212) 216 Implements for material handlers 217

Implements for handlers Feeding bucket water capacity 0000 L 0000 L heaped capacity water capacity 0000 L 0000 L heaped capacity Single door OPTIMIZED Double door OPTIMIZED SPECIFICATIONS Inside width mm Outside width mm Water capacity l. Heaped capacity l. Weight kg (without options) BD 1202 BD 1402 BD 2002 BD 2402 BD 3102 Left hand side feeding (right hand side possible: specify when ordering) Bolt-on bracket available for most material handlers Couplings supplied 2 110 2 150 900 1 200 510 2 440 2 480 1 040 1 400 565 STANDARD BUCKET With bracket 5110 5450 5810 6720 7890 1 extra D/A function required Silage fixed tines 8 TINES 9 TINES 9 TINES 9 TINES 9 TINES 440 500 500 500 500 Silage top grab # GBDF 1200 GBDF 1400 GBDF 2000 GBDF 2400 GBDF 3100 1 extra D/A function required 1460 1530 1570 1740 1780 opening (m) number of tines size of tines (mm) 1,27 10 Ø 28 x 560 1,27 12 Ø 28 x 560 2 440 2 480 1 500 2 000 680 1,50 12 Ø 28 x 560 2 440 2 480 1 800 2 400 705 1,95 11 Ø 30 x 760 2 440 2 480 2 300 3 100 800 1,95 11 Ø 30 x 760 Mobile rotor # patented RR 1200 RR 1400 RR 2000 RR 2400 RR 3100 1 extra D/A function required 2760 3150 3450 3650 3700 number of rams 1 1 1 2 2 No extra hydraulic function required they work in conjunction with the rotor Electrovalve on BD 410 410 410 410 410 Agitators AG 1400 AG 1400 AG 2400 AG 2400 AG 2400 Anti clog system, for easier discharge 440 440 670 670 670 number of discs 3 3 3 3 3 Baffle plate DM 1200 DM 1400 DM 2400 DM 2400 DM 2400 Not compatible with agitators 650 680 730 730 730 Root cutter assembly fodder beet - 13 blades - CR13 includes fi xed cutter and rotary cutter 620 620 620 620 620 potatoes - 20 blades - CR20 ncludes fi xed cutter and rotary cutter 690 690 690 690 690 Extra rotary cutter fodder beet 230 230 230 230 230 potatoes 280 280 280 280 280 Wearing counter blade factory welded 360 400 400 included included SPECIFICATIONS Inside width mm Outside width mm Water capacity l. Heaped capacity l. Weight kg (without options) BD 1402 BD 2002 BD 2402 BD 3102 2 440 2 480 1 040 1 400 565 Left hand side feeding (right hand side possible: specify when ordering) Bolt-on bracket available for most material handlers Couplings supplied STANDARD BUCKET With bracket 7170 7560 8460 9640 1 extra D/A function required Silage fixed tines 9 TINES 9 TINES 9 TINES 9 TINES 500 500 500 500 Silage top grab # GBDF 1400 GBDF 2000 GBDF 2400 GBDF 3100 1 extra D/A function required 1530 1570 1740 1780 opening (m) number of tines size of tines (mm) 1,27 12 Ø 28 x 560 1,50 12 Ø 28 x 560 1,95 11 Ø 30 x 760 1,95 11 Ø 30 x 760 Mobile rotor # patented RR 1400 RR 2000 RR 2400 RR 3100 1 extra D/A function required 3150 3450 3650 3700 number of rams 1 1 2 2 No extra hydraulic function required they work in conjunction with the rotor Electrovalve on BD 410 410 410 410 Agitators AG 1400 AG 2400 AG 2400 AG 2400 Anti clog system, for easier discharge 440 670 670 670 number of discs 3 3 3 3 Baffle plate DM 1400 DM 2400 DM 2400 DM 2400 Not compatible with agitators 680 730 730 730 Root cutter assembly 2 440 2 480 1 500 2 000 680 consult us Wearing counter blade factory welded 400 400 included included Grass silage kit 2 440 2 480 1 800 2 400 705 2 440 2 480 2 300 3 100 800 140 140 140 140 HYDRAULICS REQUIRED Handler mast with 1 auxilliary service line Handler mast with 2 auxilliary service lines HYDRAULICS REQUIRED Handler mast with an auxilliary service line Handler mast with 2 auxilliary service lines incl. BD without top grab or rotor 1 single pressure limiter 1 single pressure limiter incl. inclus BD without top grab or rotor 1 single pressure limiter 1 double pressure limiter inclus BD with top grab or rotor 1 single pressure limiter + 1 electrovalve on BD* *Dealer fitting incl. 410 1 single pressure limiter 130 # - Regulating valve compulsory for some makes of material handlers (see recommendations page 212) Included - Pressure limiter compulsory for some makes of material handlers (see recommendations page 212) BD with top grab or rotor 1 single pressure limiter + 1 electrovalve on BD* *Dealer fitting 1 double pressure limiter inclus inclus + 1 single pressure limiter 410 130 # - Regulating valve compulsory for some makes of material handlers (see recommendations page 212) - Pressure limiter compulsory for some makes of material handlers (see recommendations page 212) Included 218 Implements for material handlers 219

Amenity With 6 loader models, the MX COMPACT range is the right solution to your amenity needs Loaders MX C1 & MX C2 The micro-loaders for tractors under 30 HP Compatible with Green Spaces tractors from 20 to 50 hp, the C3u, C3 and C3+ loaders meet the needs of most professionals in the sector. Like the C1 and C2 micro-loaders, they have curved lines and full integration of the hydraulic unit and circuit. The design of the CLEAR-LINK System, intended primarily to reduce maintenance costs, reinforces its pure lines. Furthermore, the style contributes to greater durability. Also developed to ensure user comfort, the C3u, C3 and C3+ loaders are easy to hitch and unhitch thanks to a bracket frame specially designed for each tractor type. The assembly is locked with a pin secured with a safety latch. A cable control with ergonomic multifunction monolever is also available for these three models. With crowding angle of 45, the C3 and C3+ loaders ensure the implement is fully filled. Also excellent lifting capacity enables easy dumping of material into a trailer and high pallet stacking, while retaining a compact tractor-loader unit. PATENTED Totally unique, the MX C1 and C2 are the first loaders designed with a continuous monocoque construction. With their innovative curved jib, these loaders have a truly modern appearance. Additionnally, the integrated hydraulic hoses and absence of a central crossbeam offer unrivalled visibility. Using 4 double acting rams for optimum performance, they are both a perfect mix between esthetics and funtionality Streamlined curves Built-in hydraulics Loaders MX C3u, C3 & C3+ Stylish loaders that are robust and efficient NEW Loader 30C+ The high specification loader for the amenity professionals With its user friendly features, 30C+ loader is specifically designed with professional amenity professionals in mind. This range of loaders benefits from a high level of standard equipement, including: mechanical self levelling to retain the implement angle as the loader is lifted or lowered, automatic implement hitching to allow easy and quick implement change over, and an extensive range of purpose built implements for a wide range of applications. Simple drive-in Mechanical self-levelling An exceptional visibility The BMSC 118 multipurpose bucket CLEAR-LINK System selflevelling Finally, implement hitching is automatic thanks to a presence detector located on the implement carrier. There is no need to get down from the tractor to lock it. Automatic implement carrier Last but not least, the COMPACT+ loaders have unrivalled performances criteria, hence you are always working with maximum efficiency and in complete safety. Implements - BRC / BMSC / BFC / TRC An extensive range of professional implements. Buckets (loose material, multi-purpose, 4 in 1...), pallet carrier,...a full range for the amenity professionals. Weights - M250 / M400 250 and 400 Kg weights with a Cat. I. Attractive design, flat base for easier hitching on uneven grounds. Loaders, Linkages, Implements, Weights COMPACT loaders - MX C1 / C2 / C3u / C3 / C3+ / 30C+ Specifically designed for amenity requirements MX MX MX MX MX MX C1 C2 C3u C3 C3+ 30C+ Mechanical self-levelling NO NO NO NO YES YES Automatic implement hitching NO NO NO YES YES YES Indicator rod NO NO NO YES YES YES Tractor power 15-25ch 18-30ch 20-50 ch 30-65ch Maximum height at implement pivot* 1,92 m 1,92 m 2,60 m 2,60 m 2,60 m 2,60 m Maximum height under horizontal bucket (1) 1,80 m 1,80 m 2,40 m 2,40 m 2,40 m 2,35 m Maximum height dumped bucket (2)# 1,50 m 1,50 m 2,05 m 2,05 m 2,05 m 2,00 m Digging depth # 0,10 m 0,10 m 0,15 m 0,15 m 0,15 m 0,15 m Dumping angle at full height (3)# 40 40 35 50 50 68 Dumping angle at ground level (7)# 125 125 127 140 140 122 Crowd angle at ground level (4)# 30 30 25 45 46 45 Forward reach available for discharge (6)# 900 mm 900 mm 960-1060 mm960-1060 mm960-1060 mm 1050-1150 mm Lift force at implement pivot* 450 kg 450 kg 750 kg 750 kg 750 kg 1400 kg Lift capacity at implement pivot over the entire lifting range* 420 kg 420 kg 740 kg 740 kg 740 kg 990 kg Payload** : > at ground level* 390 kg 390 kg 510 kg 420 kg 530 kg 1250 kg > at 1m from ground 370 kg 370 kg 520 kg 440 kg 530 kg 1 100 kg > at 2m from ground level - - 500 kg 430 kg 530 kg 930 kg > at full height 350 kg 350 kg 470 kg 380 kg 530 kg 710 kg Lifting time 3 s 3 s 4,5 s 4,5 s 4,5 s 3,8 s Relevages Dumping time - R05 / R08 3 s 3 s 2,1 s 2,2 s 2,2 s 3,3 s Weight (without equipment) 85 kg 90 kg 200 kg 220 kg 240 kg 205 kg Front linkages R05 R08 Front linkage category IN to 1 Lifting power at couplers (kg) 500 800 Lifting power at implement center of gravity 610 mm from ball ends (kg) 300 550 Width between lifting arms (mm) 365 to 715 Lift arm ground clearance lowest position (mm) < 200 highest position (mm) > 600 Couplers Cat 1 Ball ends cat 1 integrated Top link / length (mm) Cat 1 / 345 to 500 Front Power Take Off (PTO)* maximum PTO power (PS) depends on tractor** front PTO shaft speed (rpm) depends on tractor** direction of rotation (from cab seat) depends on tractor** PTO shaft profile (DIN 9611) 1 3/8 6 splines Width (L) Height (H) Depth (P) Overhang (F) Weight 250 kg 570 mm 340 mm 460 mm 190 mm Weight 400 kg 675 mm 420 mm 475 mm 210 mm Values may vary according to type of tractor used Characteristics measured at: - 140 bars at a fl ow rate of 15 L/min for MX C1-140 bars at a fl ow rate of 20 L/min for MX C2/C3u/C3/C3+ - 180 bars at a fl ow rate of 30 L/min for MX 30C+ * Only playbad lift capacity should be considered, valves at ground level and at implement pivot are not working data. ** MX C3/C3+ : Payload at 70 cm from implement pivot. MX C1/C2/C3u : Payload with loose material bucket. # Values given with loose material bucket. L 6 P 7 3 4 1 2 MX have developed a specific front linkage range for compact tractors. Their efficient performance and user friendly features provide the tractor with additional versatility to carry front mounted implements. * Average data. These are variable according to the tractor features. ** This option is available according to the compatibility tractor/front linkage. F H 220 Amenity 221

Recommendations for COMPACT loaders & front linkages PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number AEBI TERRATRAC - Standard TT170, TT180, TT270, TT275, TT280 Original cab, original front linkage 4 A X 525272 1-29-45 ANTONIO CARRARO ERGIT - TC 5400, 6400 / TN 5400, 8400 Foldable central original roll cage 4 A X 338308 1-45-68 ERGIT - TF 7400, 8400, 9400 Foldable central original roll cage, original cab 4 A X 338308 1-45-68-156 FORD 20 - Standard 2120 Original cab, original roll cage 4 A X 337984 5-30-55 GOLDONI BOXTER - Standard 20, 25 Foldable central original roll cage 4 A X 520469 1-30 RONIN - Standard 40, 45, 50, 55 ( ERGIT - TRF 6400, 7400, 8400, 9400 / TRG 7400, 9400 / TRX 8400, 9400 Foldable central original roll cage, original cab 4 A X 338308 1-45-68 ASTER - Standard 35, 40 Foldable central original roll cage, Lochmann GL8 cab 4 A X X Xt 510727 5-6-55-62-147 ERGIT - TTR 6400, 7400, 9400 Original cab 4 A X 338308 1-45-68 ERGIT - TGF 7400, 9400 Foldable central original roll cage 4 A X 338308 1-45-68-156 DEUTZ AGROKID 2 - Standard 210, 220, 230 Original cab, original front linkage 4 A X 514216 6-30-55 AGROKID 2 - Standard 210, 220, 230 Original cab 4 A X X Xt 514215 6-30-55-147 AGROKID 2 - Standard 210, 220, 230 Foldable central original roll cage, original front linkage 4 A X 514218 6-30-55 AGROKID 2 - Standard 210, 220, 230 Foldable central original roll cage 4 A X X Xt 514217 6-30-55-147 AGROKID 2 - Standard 35, 45, 55 Original cab, original front linkage 4 A X 514216 6-30-55 AGROKID 2 - Standard 35, 45, 55 Original cab 4 A X X Xt 514215 6-30-55-147 AGROKID 2 - Standard 35, 45, 55 Foldable central original roll cage, original front linkage 4 A X 514218 6-30-55 AGROKID 2 - Standard 35, 45, 55 Foldable central original roll cage 4 A X X Xt 514217 6-30-55-147 ASTER - Standard 45 Foldable central original roll cage, Lochmann GL8 cab 4 A X X Xt 507419 5-6-55-62-147 STAR TIER 3 - Standard 3050 Foldable central original roll cage ( STAR TIER 3 - Standard 3080 Original cab 4 A X 521690 5-6-55-62 STAR TIER 3 - Standard 3080 Foldable central original roll cage 4 A X 521689 5-6-55-62 STAR TIER 3 - Standard 100, 90 Lochmann GL11 cab 4 A X 519362 5-6-55-62 ENERGY - Standard 60 Original cab 4 A X 522435 5-6-55-62 ENERGY - Standard 60 Foldable central original roll cage ( ENERGY - Standard 80 Original cab 4 A X 521690 5-6-55-62 ENERGY - Standard 80 Foldable central original roll cage 4 A X 521689 5-6-55-62 STAR - NRG 75 Foldable central original roll cage, Lochmann GL6 cab, Mauser cab 4 A X 339144 5-6-55-62 STAR - NRG 85 Foldable central original roll cage, Lochmann GL6 cab 4 A X 339104 5-6-55-62 AGROKID 2 - Standard 30, 40, 50 Foldable central original roll cage, original front linkage, Sovema Agrital CS32 cab 4 A X 514218 6-30-55 IDEA - Synchro 26, 30 Original roll cage 2 rear point 4 A X 338784 5-6-30-55-62 AGROKID 2 - Standard 30, 40, 50 Foldable central original roll cage, Sovema Agrital CS32 cab 4 A X X Xt 514217 6-30-55-147 AGROKID 1 - HST 25 / Standard 25 Foldable central original roll cage, new engine, original cab 4 A X X 337957 6-29-49-62 AGROKID 1 - HST 25 / Standard 25 Foldable central original roll cage, old engine, original cab 4 A X X 337960 6-28-29-49-62 AGROKID 1 - Standard 35, 45 Foldable central original roll cage, old engine, original cab 4 A X 338817 6-28-29-62 AGROKID 1 - Standard 35 Foldable central original roll cage, new engine, original cab 4 A X 338796 6-29-62 AGROKID 1 - Standard 45 Foldable central original roll cage, new engine, original cab 4 A X 338815 6-29-62 IDEA - HST 26, 30 / Synchro 40 Original cab, original roll cage 2 rear point 4 A X 338783 5-6-30-55-62 STAR - Quadrifoglio 75 Foldable central original roll cage, Lochmann GL6 cab 4 A X 339144 5-6-55-62 STAR - Quadrifoglio 100, 85 Foldable central original roll cage, Lochmann GL6 cab 4 A X 339104 5-6-55-62 STAR - SL 3050 / Standard 3050, 3070 Foldable central original roll cage, Mauser PS261 cab, original cab 4 A X 339146 5-6-55-62 STAR - NRG 3050, 3070 Foldable central original roll cage, Lochmann GL7.2 Cab 4 A X 507282 5-6-55-62 HURLIMANN FIAT PRINCE - Standard 30, 40, 50 Foldable central original roll cage, original front linkage, Sovema Agrital CS32 cab 4 A X 514218 6-30-55 SƒRIE 66 - Standard 17.66 Original roll cage 4 A X 338778 30-55 SƒRIE 66 - Standard 23.66 Original roll cage 4 A X 338915 5-30-55 SƒRIE 66 - Standard 35.66 Original roll cage 4 A X 338282 55 FORD 20 - Standard 1120, 1220 Original roll cage 4 A X 338778 30-55 20 - Standard 1320, 1520 Original roll cage 4 A X 338915 5-30-55 20 - Standard 1720 Original cab, original roll cage 4 A X 338915 5-30-55 20 - Standard 1920 Arceau origine, cabine origine 4 A X 339016 5-30-55 PRINCE - Standard 30, 40, 50 Foldable central original roll cage, Sovema Agrital CS32 cab 4 A X X Xt 514217 6-30-55-147 PRINCE - Standard 35, 45, 55 Original cab, original front linkage 4 A X 514216 6-30-55 PRINCE - Standard 35, 45, 55 Original cab 4 A X X Xt 514215 6-30-55-147 PRINCE - Standard 35, 45, 55 Foldable central original roll cage, original front linkage 4 A X 514218 6-30-55 PRINCE - Standard 35, 45, 55 Foldable central original roll cage 4 A X X Xt 514217 6-30-55-147 PRINCE - Standard 325 / XV 325 Foldable central original roll cage, new engine, original cab 4 A X X 337957 6-29-49-62 PRINCE - Standard 325 / XV 325 Foldable central original roll cage, old engine, original cab 4 A X X 337960 6-28-29-49-62 PRINCE - Standard 435, 445 Foldable central original roll cage, old engine, original cab 4 A X 338817 6-28-29-62 Front loaders & front linkages 1 - Brackets fit to clutch housing without support to rear axle. 5 - Exact make and model of cab or roll cage required. 6 - State if tractor is fitted with an original front linkage. 28 - To fit loader bracket drill the side of front casting as required. 29 - Hydraulic connection on original control valve only. 30 - If tractor with a mid-mounted mower, please contact us. 45 - Shock eliminator is mandatory. 49 - A small oil filter (ref. 24419470.0 supplied by SLH) is required to allow the bracket to fit correctly to the tractor. 55 - Non retractable MX joystick, positioned adjacent to right hand side of seat. 62 - Bracket designed for tractors with front linkage. 68 - Retractable MX joystick without armrest, positioned adjacent to right hand side of seat. 147 - In order to fit our front pto with transmission shaft, tractor has to be fitted with original mid mounted PTO. 156 - For loader operated via original tractor spool valves on versions TGF and TF, specific installation is to be made by workshop engineer. Xt Central transmission PTO 222 Recommendations for COMPACT loaders and front linkages 223

Recommendations for COMPACT loaders & front linkages PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number HURLIMANN PRINCE - Standard 445 Foldable central original roll cage, new engine, original cab 4 A X 338815 6-29-62 ISEKI TF - FH 321 Hydrostatic transmission, original roll cage 2 rear point 4 A X 338278 5-45-55-127-133-195 PRINCE - Standard 435 Foldable central original roll cage, new engine, original cab 4 A X 338796 6-29-62 ISEKI TF - FM 325, 330 Mechanical transmission, original roll cage 2 rear point 4 A X X Xt 339082 TF - FH 325, 330 Hydrostatic transmission, original roll cage 2 rear point 4 A X X Xt 339082 5-45-55-127-133-195-147 5-45-55-127-133-195-147 TXG - Standard 23, 237 Original roll cage 2 rear point 4 A X 522043 1-30 TM - FRE 3160 Mechanical transmission, original roll cage 2 rear point 4 A X 520042 30 TK - Standard 527, 532, 538 Mechanical transmission, original cab, original roll cage 4 A X X 338290 5-30-55-127 TK - Standard 546 Original cab, original roll cage 4 A X X 338270 30-55 Hydrostatic transmission, mechanical transmission, original roll cage 2 TM - Standard 3200, 3240 rear point 4 A X X Xt 338292 30-55-62-127-147 TM - FZE 3185 / FUZE 3185 ( 3100 - Standard 3125 Hydrostatic transmission, mechanical transmission, original cab 4 A X 338278 3100 - Standard 3130, 3135 Original cab 4 A X X Xt 339082 5-30-45-55-127-133- 195 5-30-45-55-127-133- 195-147 TM - FVRE 3215, 3245 Mechanical transmission, original roll cage 2 rear point 4 A X X Xt 525128 30-62-147 TM - FVRE 3215, 3245 Foldable central original roll cage, mechanical transmission 4 A X X Xt 521966 30-62-147 TM - FHSMWRE 3215, 3245 Hydrostatic transmission, original roll cage 2 rear point 4 A X X Xt 525128 30-55-62-147 TM - FWRE 3265 Foldable central original roll cage, mechanical transmission 4 A X X Xt 523167 30-55-62-196-147 TM - FHSMWRE 3265 Hydrostatic transmission, Lugstein LK 155.1 Cab 4 A X X Xt 524524 30-55-62-196-147 TM - FHSMWRE 3265 Hydrostatic transmission, original roll cage 2 rear point 4 A X X Xt 524528 30-55-62-196-147 TH - FVRE 4295, 4335 Foldable central original roll cage, mechanical transmission 4 A X X 522095 30-55-62-178 TH - FSKMWRE 4295, 4335, 4365 Mechanical transmission, original roll cage 2 rear point 4 A X X Xt 522794 30-55-62-147 TH - FHMWRE 4295, 4335, 4365 Hydrostatic transmission, original roll cage 2 rear point 4 A X X Xt 522794 30-55-62-147 5000 - Standard 5035, 5040 Mechanical transmission, original cab 4 A X X 338290 5-30-55 TA - Standard 525, 530 Original cab, original roll cage 4 A X X 338290 5-30-55 TA - Standard 525FSE Original cab, original roll cage 4 A X 338290 5-30-55 TA - Standard 545 Original cab, original roll cage 4 A X 338270 5-55 TX - Standard 1300, 1500 Original roll cage 4 A X 338284 30-55 TX - Standard 2140, 2160 Hydrostatic transmission, mechanical transmission, original roll cage 4 A X 337954 30-55 TE - Standard 3210 Original roll cage 4 A X 338203 30-55 TE - Standard 4320, 4370 Original roll cage 4 A X 338830 5-55 JCB TH - Standard 4260, 4290, 4330 Hydrostatic transmission, Lugstein LK 107 cab, mechanical transmission, original roll cage 4 A X X X Xt 513766 TG - Standard 6400, 6490, 6620 ( 5-45-55-62-127-195- 192 300 COMPACT - HST 323 Original roll cage 2 rear point, without mid- mounted mower 4 A 511616 29-30-62-147 300 COMPACT - HST 323 Mid-mounted mower JCB 1500M, original roll cage 2 rear point 4 A 511617 29-30-62-147 TG - Standard 5330, 5390 cage 2 rear point 4 A X X Xt 507434 5-30-55-62-127-147 300 COMPACT - HST 327 Original roll cage 2 rear point, without mid- mounted mower 4 A 511616 29-30-62-147-202 TG - Utility 5330 Foldable central original roll cage 4 A X X 510861 30-55-62-135-178 300 COMPACT - HST 327 Mid-mounted mower JCB 1500M, original roll cage 2 rear point 4 A 511617 29-30-62-147-202 TG - FHMCE 5395 Hydrostatic transmission, original cab 4 A X X Xt 507434 TG - FHMRE 5395 Hydrostatic transmission, original roll cage 2 rear point 4 A X X Xt 507434 TG - Standard 6400 ( TG - Standard 6490 ( 5-30-55-62-127-135- 147 5-30-55-62-127-135- 147 300 COMPACT - HST 331, 335 Original roll cage 2 rear point 4 A X X Xt 511419 30-55-62-147 300 COMPACT - MƒCANIQUE 354, 360 Original cab 4 A X X 514810 30-55-62 JOHN DEERE 1R - Standard 1026R Original roll cage 2 rear point 4 A X 536466 1-30 TG - FHMCYE 5475 Hydrostatic transmission, original cab 4 A X X Xt 535720 30-37-55-62-135-147 TG - Standard 5470 cage 2 rear point 4 A X X Xt 535720 5-30-37-55-62-135- 147 TG - Utility 5470 Foldable central original roll cage 4 A X X 515870 30-37-55-62-135-178 TM - FE 215, 217 / FMUE 215, 217 Mechanical transmission, original roll cage 4 A X X 338292 30-55-127 TM - FHMUE 215, 217 Hydrostatic transmission, original roll cage 4 A X X 338292 30-55-127 TM - Standard 223 Hydrostatic transmission, mechanical transmission, original roll cage 4 A X X 338292 30-55-127 TU - Standard 320, 324 Original roll cage 4 A X 338826 30-55 TF - FM 321 Mechanical transmission, original roll cage 2 rear point 4 A X 338278 5-45-55-127-133-195 COMPACT - Standard 20C, 25C Foldable central original roll cage 4 A X 520469 1-30 COMPACT - Standard 3036E Ems cab, hydrostatic transmission, original roll cage 2 rear point 4 A X X 524010 5-30-36-55-62 2R - Standard 2025R, 2027R, 2032R ( 2020 - Standard 2320, 2520, 2720 ( 3R - Standard 3033R, 3038R, 3045R ( 3020 - Standard 3320, 3520, 3720 Cabine Mauser KS 444, hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X X 515520 5-6-30-55-56-62-135 Cab RWC G004 with 4 supports, hydrostatic transmission, mechanical 3020 - Standard 3320, 3520, 3720 transmission 4 A X X 523061 6-55-62-133-135 4M - Standard 4049M, 4066M ( Front loaders & front linkages 1 - Brackets fit to clutch housing without support to rear axle. 5 - Exact make and model of cab or roll cage required. 6 - State if tractor is fitted with an original front linkage. 29 - Hydraulic connection on original control valve only. 30 - If tractor with a mid-mounted mower, please contact us. 37 - MX valve preferred. 45 - Shock eliminator is mandatory. 55 - Non retractable MX joystick, positioned adjacent to right hand side of seat. 62 - Bracket designed for tractors with front linkage. 127 - State if tractor has auxillary spool valves. 133 - Bracket not compatible with central mower. 135 - If tractor has front linkage, it is mandatory for the loader to be equipped with advanced locking system. Consult us if re-fitting original equipment. 147 - In order to fit our front pto with transmission shaft, tractor has to be fitted with original mid mounted PTO. 178 - Our loader condemns the use of the folding rops system. 192 - If tractor with original ventral mower, the fitting of our ventral PTO will require to dismount the mower fixing and lifting system. 195 - Shock Eliminator is mandatory with MX C2 and C3. 196 - For fitting a C2 loader onto tractor with cab, it is mandatory to fit a monolever with cable control. Xt Central transmission PTO 224 Recommendations for COMPACT loaders and front linkages 225

Recommendations for COMPACT loaders & front linkages PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number JOHN DEERE 4R - Standard 4049R, 4066R ( KUBOTA STV - Standard 32, 36, 40 Hydrostatic transmission, original cab, original roll cage 4 A X X Xt 531313 5-30-55-187-147 4020 - Standard 4320, 4520, 4720 4020 - Standard 4320, 4520, 4720 4000, 4010 - Standard 4100, 4110 Cabine Mauser KS 444, hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X X 528191 5-6-30-55-56 Cab RWC G004 with 4 supports, hydrostatic transmission, mechanical transmission 4 A X X 527625 5-6-30-55-56 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X 338089 5-6-30-55 MK - Standard 5000 ( L - Standard 3200 Foldable central original roll cage, original roll cage 2 rear point 4 A X X 508235 36-55-72-37 L - Standard 4100 Ems cab, original roll cage 2 rear point 4 A X X 521200 37-55-62-135 4000, 4010 - Standard 4115 Hydrostatic transmission, original roll cage 2 rear point 4 A X 338837 5-6-30-55 4000, 4010 - Standard 4200, 4300, 4310, 4400, 4410 4000, 4010 - Standard 4200, 4300, 4310, 4400, 4410 cage 2 rear point 4 A X X 515520 5-6-30-55-57-62-135 cage 2 rear point 4 A X X 515520 5-6-30-55-57-62 4000, 4010 - Standard 4500 Mechanical transmission, original cab, original roll cage 2 rear point 4 A X 528192 5-6-30-55-56 L - Standard 4100 Foldable central original roll cage 4 A X X 523500 37-55-62-135 L - Standard 4400 Original roll cage 2 rear point 4 A X X 521200 37-55-62-135 L - HST 4100, 4400 Original roll cage 2 rear point 4 A X X 521200 37-55-62-135 L40II - L4240, L5040, L5240, L5740 ( 4000, 4010 - Standard 4600, 4610, 4700, 4710 cage 2 rear point 4 A X X 528192 5-6-30-55-56 GRAND L40 - GST L3240, L3540 / HST L3240, L3540 / MƒCANIQUE L3240 ( 55 - Standard 855, 955 Original roll cage 4 A X 338257 5-29-30 KIOTI GRAND L40 - MƒCANIQUE L3940, L4240 Original roll cage 2 rear point 4 A X X 513470 55-62-135 GRAND L40 - MƒCANIQUE L3940, L4240 Original roll cage 2 rear point 4 A X X 513470 55-62-135 CK - HST 27, 35, 40 Hydrostatic transmission, original roll cage 2 rear point 4 A X 524991 5-29-30 CK - Standard 27, 35, 40 Mechanical transmission, original roll cage 2 rear point 4 A X 524991 5-29-30 GRAND L40 - GST L3940, L4240, L4740, L5040 / HST L3940, L4240, L4740, L5240, L5740 GRAND L40 - GST L3940, L4240, L4740, L5040 / HST L3940, L4240, L4740, L5240, L5740 Original cab, original roll cage 2 rear point 4 A X X 513470 55-62-135 Original cab, original roll cage 2 rear point 4 A X X 513470 55-62-135 CK - Standard 22 Mechanical transmission, original roll cage 2 rear point 4 A X 524990 5-29-30-196 CK - HST 22 Hydrostatic transmission, original roll cage 2 rear point 4 A X 524990 5-29-30-196 CK - Standard 2810 Mechanical transmission, original roll cage 2 rear point 4 A X X 530194 30-55-62 CK - HST 2810 Hydrostatic transmission, original roll cage 2 rear point 4 A X X 530194 30-55-62 EX - H 35 / Standard 35 ( EX - Standard 40, 50 Mechanical transmission, original cab, original roll cage 2 rear point 4 A X 525032 29-30-62 EX - H 40, 50 Hydrostatic transmission, original cab, original roll cage 2 rear point 4 A X 525032 29-30-62 DS - Standard 4110, 4510 Mechanical transmission, original cab, original roll cage 2 rear point 4 A X 525025 30-62 LX - LX500L Mechanical transmission, original cab, original roll cage 2 rear point 4 A X 525025 30-62 KUBOTA BX - Standard 2350 Original roll cage 2 rear point 4 A X 520118 1-30 B - Standard 1620, 1820 Original roll cage 2 rear point 4 A X 521099 30 B - Standard 2320, 2420, 2620, 2920 Original roll cage 2 rear point 4 A X 521982 30 B50 - D B2050, B2350, B2650 / DB B2050, B2350, B2650 B50 - HDB B2350, B2650, B3150 / HDB-C B2350, B2650, B3150 SUPER B PRƒMIUM - HST B2230, B2530 / MƒCANIQUE B1830, B2230, B2530 ( ( Original cab, original roll cage 2 rear point 4 A X X Xt 512981 30-55-62-187-147 SUPER B PRƒMIUM - HST B2630, B3030 Original cab 4 A X X Xt 512980 5-30-55-62-187-147 SUPER B PRƒMIUM - HST B2630, B3030 Original roll cage 2 rear point 4 A X X Xt 512980 5-30-55-62-187-147 SUPER B - Standard 1710, 2110, 2410 Hydrostatic transmission, mechanical transmission, original cab 4 A X 338973 5-30-55 SUPER B - Standard 1710, 2110, 2410 Hydrostatic transmission, mechanical transmission, original roll cage 4 A X X 338973 5-30-55 SUPER B - Standard 2710 Hydrostatic transmission, original cab 4 A X 338973 5-30-55 SUPER B - Standard 2710 Hydrostatic transmission, original roll cage 4 A X X 338973 5-30-55 SUPER B - Standard 2910 Hydrostatic transmission, original cab, original roll cage 4 A X 338973 5-30-55 B - Standard 1410, 1610 Original roll cage 2 rear point 4 A X 520972 30 B - Standard 6100, 7100 Mechanical transmission, without roll cage 4 A X 337952 30-55 B - HST 6100, 7100 Hydrostatic transmission, without roll cage 4 A X 337952 30-55 B - Standard 6200, 7200 Mechanical transmission, without roll cage 4 A X 337759 30 B - HST 6200, 7200 Hydrostatic transmission, without roll cage 4 A X 337759 30 B - Standard 8200 Mechanical transmission, without roll cage 4 A X 337975 30-55 B - HST 8200 Hydrostatic transmission, without roll cage 4 A X 337975 30-55 B - Standard 1550, 1750 Mechanical transmission, original roll cage 2 rear point 4 A X 337762 30 B - HST 1550, 1750 Hydrostatic transmission, original roll cage 2 rear point 4 A X 337762 30 B - Standard 2150 Mechanical transmission, original roll cage 2 rear point 4 A X 337975 30-55 B - HST 2150 Hydrostatic transmission, original roll cage 2 rear point 4 A X 337975 30-55 B - Standard 1700, 2100, 2400 Buisard cab, mechanical transmission 4 A X 338973 5-30-55 B - Standard 1700, 2100, 2400 Mechanical transmission, original roll cage 2 rear point 4 A X X 338973 5-30-55 STW - Standard 34, 37, 40 Hydrostatic transmission, original cab, original roll cage 4 A X X Xt 535023 5-30-55-112-154-187- 249-147 B - HST 1700, 2100, 2400 Buisard cab, hydrostatic transmission 4 A X 338973 5-30-55 Front loaders & front linkages 1 - Brackets fit to clutch housing without support to rear axle. 5 - Exact make and model of cab or roll cage required. 6 - State if tractor is fitted with an original front linkage. 29 - Hydraulic connection on original control valve only. 30 - If tractor with a mid-mounted mower, please contact us. 55 - Non retractable MX joystick, positioned adjacent to right hand side of seat. 56 - Retractable MX joystick, positioned at front right hand side of cab. 57 - Non retractable MX joystick, positioned at front right hand side of cab. 62 - Bracket designed for tractors with front linkage. 112 - For loaders with an electric 3rd function operated through the original tractor spool valves with an electric push button on the tractor joystick, we supply special wiring kit. 135 - If tractor has front linkage, it is mandatory for the loader to be equipped with advanced locking system. Consult us if re-fitting original equipment. 147 - In order to fit our front pto with transmission shaft, tractor has to be fitted with original mid mounted PTO. 154 - For loaders or front linkages operated via original control valves, state if lateral spools. 187 - If the tractor has original monolever cable controlled lateral valves, it can only be operated by these valves (operation with an MX valve is incompatible). 196 - For fitting a C2 loader onto tractor with cab, it is mandatory to fit a monolever with cable control. 249 - If the tractor has 2 side spool valves with mechanical monolever + 1 electrohydraulic spool valve, the loader with 3rd function is not compatible. Xt Central transmission PTO 226 Recommendations for COMPACT loaders and front linkages 227

Recommendations for COMPACT loaders & front linkages PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number KUBOTA B - HST 1700, 2100, 2400 Hydrostatic transmission, original roll cage 2 rear point 4 A X X 338973 5-30-55 ST - Standard 30 Buisard cab, hydrostatic transmission, original roll cage 2 rear point 4 A X 338254 5-30-55 ST ALPHA - Standard 30, 35 Buisard cab, hydrostatic transmission, original roll cage 2 rear point 4 A X X Xt 339106 5-30-55-147 GRAND L - Standard 3130, 3430 Mechanical transmission, original roll cage 4 A X X 513470 5-6-30-55-135 GRAND L - Standard 3830 Mechanical transmission, original cab, original roll cage 4 A X X 513470 5-6-30-55-135 GRAND L - Standard 4630 Gst transmission, mechanical transmission, original cab, original roll cage 4 A X X 513470 5-6-30-55-135 LANDINI SƒRIE 1 - M 1-40, 1-50 Mechanical transmission, original roll cage 2 rear point 4 A X 525032 29-30-62 SƒRIE 1 - H 1-40, 1-50 Hydrostatic transmission, original cab, original roll cage 2 rear point 4 A X 525032 29-30-62 SƒRIE 1 - F1-50 Mechanical transmission, original roll cage 2 rear point 4 A X 525025 30-62 MISTRAL - TIER 3 - Standard 40, 45, 50 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510159 5-6-30-55-62-135-147 MISTRAL - TIER 3 - Standard 55 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510160 5-6-30-55-62-135-147 MISTRAL - Standard 40, 45, 50 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510159 5-6-30-55-62-135-147 GRAND L - Standard 5030 Gst transmission, hydrostatic transmission, mechanical transmission, original cab, original roll cage 4 A X X 513470 5-6-30-55-135 MISTRAL - Standard 55 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510160 5-6-30-55-62-135-147 GRANDEL - Standard 2900, 3300 Buisard cab, original cab, original roll cage 2 rear point 4 A X 338267 5-6-30-55-62 GRANDEL - Standard 3600, 4200 Buisard cab, original cab, original roll cage 2 rear point 4 A X 338268 5-6-30-55-62 L - Standard 2500, 3000 Original roll cage 4 A X 337775 36-55 L - SƒRIE II 245 Original roll cage 4 A X 337775 55 L - SƒRIE I 295 Original roll cage 4 A X 338805 55 L - Standard 2250, 2550 Original roll cage 2 rear point 4 A X 338267 5-6-30-55-62 L - Standard 2850, 3250 Original roll cage 2 rear point 4 A X 338268 5-6-30-55-62 LAMBORGHINI GREEN PRO - H G40H, G50H Original cab, original roll cage 2 rear point 4 A X X 530960 55-62-112-135 MISTRAL - America 40, 45, 50 Original cab, original roll cage 2 rear point 4 A X X Xt 510170 5-6-30-55-62-135-147 DISCOVERY - Climber 65, 85 / Multitrac 65, 85 Original roll cage 4 A X 338793 1-45-68 LS HST - J23, J27 ( RIO - HST R28, R32, R36 Original roll cage 2 rear point 4 A X X Xt 511563 55-147 RIO - HST R41, R50 Original roll cage 2 rear point 4 A X X Xt 515245 55-135-147 NEO - Standard N41, N47 Original roll cage 2 rear point 4 A X X 514533 55-135 MASSEY FERGUSON 1700 - Standard 1740, 1747 ( R1 - Standard 30, 40, 50 Foldable central original roll cage, original front linkage, Sovema Agrital CS32 cab 4 A X 514218 6-30-55 1500 - Compact 1519, 1523 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X X Xt 338292 30-55-127-30-147 R1 - Standard 30, 40, 50 Foldable central original roll cage, Sovema Agrital CS32 cab 4 A X X Xt 514217 6-30-55-147 R1 - Standard 35, 45, 55 Original cab, original front linkage 4 A X 514216 6-30-55 R1 - Standard 35, 45, 55 Original cab 4 A X X Xt 514215 6-30-55-147 R1 - Standard 35, 45, 55 Foldable central original roll cage, original front linkage 4 A X 514218 6-30-55 R1 - Standard 35, 45, 55 Foldable central original roll cage 4 A X X Xt 514217 6-30-55-147 RUNNER - Jet 250 / Standard 250 Foldable central original roll cage, new engine, original cab 4 A X X 337957 6-29-49-62 RUNNER - Jet 250 / Standard 250 Foldable central original roll cage, old engine, original cab 4 A X X 337960 6-28-29-49-62 RUNNER - Standard 350, 450 Foldable central original roll cage, old engine, original cab 4 A X 338817 6-28-29-62 RUNNER - Standard 350 Foldable central original roll cage, new engine, original cab 4 A X 338796 6-29-62 RUNNER - Standard 450 Foldable central original roll cage, new engine, original cab 4 A X 338815 6-29-62 LANDINI 1500 - Compact 1520A Foldable central original roll cage, mechanical transmission 4 A X X Xt 521966 30-62-30-147 1500 - Compact 1525H Hydrostatic transmission, original roll cage 2 rear point 4 A X X Xt 524528 30-55-62-196-30-147 1500 - Compact 1528, 1531 Hydrostatic transmission, Lugstein LK 107 cab, original roll cage 2 rear point 4 A X X X Xt 513766 5-45-55-62-127-192 1500 - Compact 1529, 1532 1500 - Compact 1533, 1540 1500 - Compact 1533 1500 - Compact 1547 1500 - Compact 1547 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X X Xt 522794 30-55-62-30 cage 2 rear point 4 A X X Xt 507434 5-30-55-62-127-147 cage 2 rear point 4 A X 507434 5-30-55-62-127 cage 2 rear point, ssm 72 mid- mounted mower 4 A X X Xt 535720 cage 2 rear point 4 A X X Xt 512668 5-30-37-55-62-135- 147 5-30-37-55-62-135- 147 1500 - Agricole 1529, 1532 Foldable central original roll cage, mechanical transmission 4 A X X 522095 30-55-62-178-30 1500 - Agricole 1540 Foldable central original roll cage 4 A X X 510861 30-55-62-178 1500 - Agricole 1547 Foldable central original roll cage 4 A X X 515870 30-37-55-62-135-178 SƒRIE 1 - M 1-25 Mechanical transmission, original roll cage 2 rear point 4 A X 524990 5-29-30-196 SƒRIE 1 - H 1-25 Hydrostatic transmission, original roll cage 2 rear point 4 A X 524990 5-29-30-196 SƒRIE 1 - M 1-30, 1-35 Mechanical transmission, original roll cage 2 rear point 4 A X 524991 5-29-30 SƒRIE 1 - H 1-30, 1-35 Hydrostatic transmission, original roll cage 2 rear point 4 A X 524991 5-29-30 1200 - Standard 1205, 1215 1200 - Standard 1210, 1220 1200 - Standard 1230, 1235 1200 - Standard 1250, 1260 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X X 338292 30-55-127 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X 338278 cage 2 rear point 4 A X X Xt 339082 5-30-45-55-127-133- 195 5-30-45-55-127-133- 195-147 cage 2 rear point 4 A X X 338290 5-15-30-127 Front loaders & front linkages 5 - Exact make and model of cab or roll cage required. 6 - State if tractor is fitted with an original front linkage. 28 - To fit loader bracket drill the side of front casting as required. 29 - Hydraulic connection on original control valve only. 30 - If tractor with a mid-mounted mower, please contact us. 36 - MX valve essential. 49 - A small oil filter (ref. 24419470.0 supplied by SLH) is required to allow the bracket to fit correctly to the tractor. 55 - Non retractable MX joystick, positioned adjacent to right hand side of seat. 62 - Bracket designed for tractors with front linkage. 112 - For loaders with an electric 3rd function operated through the original tractor spool valves with an electric push button on the tractor joystick, we supply special wiring kit. 135 - If tractor has front linkage, it is mandatory for the loader to be equipped with advanced locking system. Consult us if re-fitting original equipment. 147 - In order to fit our front pto with transmission shaft, tractor has to be fitted with original mid mounted PTO. 196 - For fitting a C2 loader onto tractor with cab, it is mandatory to fit a monolever with cable control. Xt Central transmission PTO 228 Recommendations for COMPACT loaders and front linkages 229

Recommendations for COMPACT loaders & front linkages PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number MASSEY FERGUSON 1300 - Standard 1325 Foldable central original roll cage, mechanical transmission, original cab 4 A X 337957 6-29-49-62 NEW HOLLAND BOOMER 3000 - Standard 3040, 3045, 3050 Cvt transmission (Easydrive), original cab, original roll cage 2 rear point 4 A X X Xt 522280 5-6-30-55-203-147 1300 - Standard 1335 Foldable central original roll cage, mechanical transmission, original cab 4 A X 338796 6-29-62 BOOMER 3000 - Supersteer 3040, 3045, 3050 cage 2 rear point 4 A X 522498 5-6-30-55-134 1300 - Standard 1345 Foldable central original roll cage, mechanical transmission, original cab 4 A X 338815 6-29-62 BOOMER 3000 - Supersteer 3040, 3045, 3050 Cvt transmission (Easydrive), original cab, original roll cage 2 rear point 4 A X 522280 5-6-30-55-134 2400 - Standard 2405, 2410, 2415 Original cab, original front linkage 4 A X 514216 6-30-55 TD3 - Standard TD3.50 Cabine Lochmann nh10, down exhaust on left-hand side, original roll cage 2 rear point 4 A X X 524443 5-55-62 2400 - Standard 2405, 2410, 2415 Original cab 4 A X X Xt 514215 6-30-55-147 2400 - Standard 2405, 2410, 2415 Foldable central original roll cage, original front linkage 4 A X 514218 6-30-55 2400 - Standard 2405, 2410, 2415 Foldable central original roll cage 4 A X X Xt 514217 6-30-55-147 MCCORMICK X10 - M X10.25 Mechanical transmission, original roll cage 2 rear point 4 A X 524990 5-29-30-196 X10 - M X10.30, X10.35 Mechanical transmission, original roll cage 2 rear point 4 A X 524991 5-29-30 X10 - H X10.25 Hydrostatic transmission, original roll cage 2 rear point 4 A X 524990 5-29-30-196 X10 - H X10.30, X10.35 Hydrostatic transmission, original roll cage 2 rear point 4 A X 524991 5-29-30 X10 - M X10.40, X10.50 Mechanical transmission, original roll cage 2 rear point 4 A X 525032 29-30-62 T3F - Standard T3.50F, T3.55F, T3.65F, T3.75F Down exhaust on left-hand side, foldable central original roll cage 4 A X X 535163 5-45-55-62 T400 - Standard T480 Down exhaust on left-hand side, original roll cage 2 rear point 4 A X X 524443 5-55-62 F400 - Standard F480 Down exhaust on left-hand side, original roll cage 2 rear point 4 A X X 524443 5-55-62 TCDA - Standard 24 TCDA - Standard 35 TCDA - Standard 35 TCDA - Standard 40, 45 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X 338779 30-55 Hydrostatic transmission, Mauser KS445 cab, mechanical transmission, original cab, original roll cage 2 rear point, standard front axle Hydrostatic transmission, Mauser KS445 cab, mechanical transmission, original cab, original roll cage 2 rear point, Supersteer front axle ( ( Hydrostatic transmission, Mauser KS445 cab, mechanical transmission, original cab, original roll cage 2 rear point, standard front axle 4 A X 522498 5-6-30-55-62 Hydrostatic transmission, Mauser KS445 cab, mechanical transmission, TCDA - Standard 40, 45 original cab, original roll cage 2 rear point, Supersteer front axle 4 A X 522498 5-6-30-55-62-134 TCA - Standard 35 ( X10 - H X10.40, X10.50 Hydrostatic transmission, original cab, original roll cage 2 rear point 4 A X 525032 29-30-62 TCA - Standard 40, 45 Mechanical transmission, original cab, original roll cage 2 rear point, standard front axle 4 A X 522498 5-6-30-55-62 X10 - F X10.50 Mechanical transmission, original roll cage 2 rear point 4 A X 525025 30-62 T3000 - Standard 3010, 3020, 3030 Foldable central original roll cage, original cab 4 A X X Xt 510159 5-6-30-55-62-135-147 GM TIER 3 - Standard 40, 45, 50 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510159 5-6-30-55-62-135- 135-147 T3000 - Standard 3040 Foldable central original roll cage, original cab 4 A X X Xt 510160 5-6-30-55-62-135-147 GM TIER 3 - Standard 55 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510160 5-6-30-55-62-135-147 GX - Standard 40, 45, 50 Original cab, original roll cage 2 rear point 4 A X X Xt 510170 5-6-30-55-62-135-147 TCE - Standard 40, 45, 50 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510159 5-6-30-55-62-135-147 TCE - Standard 55 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510160 5-6-30-55-62-135-147 GX - Standard 40H, 45H, 50H C39 cab, CS36 cab, Mauser cab, original roll cage 2 rear point 4 A X X Xt 510170 5-6-30-55-62-135-147 GM - Standard 40, 45, 50 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510159 5-6-30-55-62-135-147 25 - Standard 1725, 1925 30 - Standard 1530, 1630 cage 2 rear point, standard front axle, Supersteer front axle 4 A X 338915 5-30-55 cage 2 rear point, standard front axle, Supersteer front axle 4 A X 338915 5-30-55 GM - Standard 55 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510160 5-6-30-55-62-135-147 MITSUBISHI MT - HST 1800 / Standard 1800 Original roll cage 2 rear point 4 A X 526091 20 - Standard 1920 Original cab, original roll cage 2 rear point 4 A X 339016 5-30-55 20 - Standard 2120 Original cab, original roll cage 2 rear point 4 A X 337984 5-30-55 66 - Standard 35.66 Foldable central original roll cage 4 A X 338282 55 MT - Standard 2600 Original roll cage 2 rear point 4 A X 513799 30-55-62 MT - Standard 3000, 3500 Original roll cage 2 rear point 4 A X 513798 30-55-62 NEW HOLLAND TZ - Standard 21, 24 Original roll cage 2 rear point 4 A X 523171 30 T3000 TIER 3 - Standard T3010, T3020, T3030 Foldable central original roll cage, original cab 4 A X X Xt 510159 5-6-30-55-62-135-147 TCD - Standard 18, 21, 24 TCD - Standard 25, 27, 29, 33 TCD - Standard 40, 45 TCD - Standard 40, 45 RANSOMES Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X 338779 30-55 cage 2 rear point, standard front axle, Supersteer front axle 4 A X 338915 5-30-55 Hydrostatic transmission, Mauser KS445 cab, mechanical transmission, original cab, original roll cage 2 rear point, standard front axle 4 A X 522498 5-6-30-55-62 Hydrostatic transmission, Mauser KS445 cab, mechanical transmission, original cab, original roll cage 2 rear point, Supersteer front axle 4 A X 522498 5-6-30-55-62-134 T3000 TIER 3 - Standard T3040 Foldable central original roll cage, original cab 4 A X X Xt 510160 5-6-30-55-62-135-147 BOOMER COMPACT - Standard 20, 25, 30, 35, 40, 50 ( BOOMER - Standard 45D, 54D ( CT - Standard 318, 320 CT - Standard 325, 333 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X 338778 30-55 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X 338915 30-55 CT - Standard 435 Mechanical transmission, original roll cage 2 rear point 4 A X 339016 5-30-55 BOOMER 3000 - Standard 3040, 3045, 3050 cage 2 rear point 4 A X X 522498 5-6-30-55-203 CT - Standard 445 Mechanical transmission, original roll cage 2 rear point 4 A X 337984 5-30-55 Front loaders & front linkages 5 - Exact make and model of cab or roll cage required. 6 - State if tractor is fitted with an original front linkage. 29 - Hydraulic connection on original control valve only. 30 - If tractor with a mid-mounted mower, please contact us. 49 - A small oil filter (ref. 24419470.0 supplied by SLH) is required to allow the bracket to fit correctly to the tractor. 55 - Non retractable MX joystick, positioned adjacent to right hand side of seat. 62 - Bracket designed for tractors with front linkage. 135 - If tractor has front linkage, it is mandatory for the loader to be equipped with advanced locking system. Consult us if re-fitting original equipment. 147 - In order to fit our front pto with transmission shaft, tractor has to be fitted with original mid mounted PTO. 196 - For fitting a C2 loader onto tractor with cab, it is mandatory to fit a monolever with cable control. 203 - For tractors with Lewis 180E mid-mounted mowers, the modification kit ref.5241 - If a MX bracket is already fitted on the tractor, please state its reference. Also order a specific front guard ref.533273 to MX spare parts department.33 Must be ordered from us. Xt Central transmission PTO 230 Recommendations for COMPACT loaders and front linkages

Recommendations for COMPACT loaders & front linkages PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number PRICE C1 C2 C3u/C3/C3+ 30C+ R05 R08 PTO Bracket reference number RENAULT MULTIS - Standard 136, 146, 156 SAME Foldable central original roll cage, original cab, original roll cage 4 points on clutch + rear axle 4 A X 338308 1-45-68 VALPADANA VP1500 TIER 3 - Standard 1555 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510160 5-6-30-55-62-135-147 1500 - Standard 1540, 1545, 1550 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510159 5-6-30-55-62-135-147 SOLARIS 2 - Standard 30, 40, 50 Foldable central original roll cage, original front linkage, Sovema Agrital CS32 cab 4 A X 514218 6-30-55 SOLARIS 2 - Standard 30, 40, 50 Foldable central original roll cage, Sovema Agrital CS32 cab 4 A X X Xt 514217 6-30-55-147 SOLARIS 2 - Standard 35, 45, 55 Original cab, original front linkage 4 A X 514216 6-30-55 SOLARIS 2 - Standard 35, 45, 55 Original cab 4 A X X Xt 514215 6-30-55-147 SOLARIS 2 - Standard 35, 45, 55 Foldable central original roll cage, original front linkage 4 A X 514218 6-30-55 SOLARIS 2 - Standard 35, 45, 55 Foldable central original roll cage 4 A X X Xt 514217 6-30-55-147 1500 - Standard 1555 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510160 5-6-30-55-62-135-147 1600 - HTS 1640, 1645, 1650 / Standard 1640, 1645, 1650 Original cab, original roll cage 2 rear point 4 A X X Xt 510170 5-6-30-55-62-135-147 9500 - Climber 9565, 9585 / Multitrac 9565, 9585 Original roll cage 4 A X 338793 1-45-68 AUTRES GAMMES - Standard 4035 Foldable central original roll cage 4 A X 338547 5-37-55 YAGMUR EFSANE - Standard 40 W, 50 W, 55 W Foldable central original roll cage 4 A X 338547 5-37-55 SOLARIS 1 - Standard 25 SOLARIS 1 - Standard 25 Foldable central original roll cage, hydrostatic transmission, mechanical transmission, new engine, original cab 4 A X X 337957 6-29-49-62 Foldable central original roll cage, hydrostatic transmission, mechanical transmission, old engine, original cab 4 A X X 337960 6-28-29-49-62 YANMAR GK - Standard 16, 18, 200 Mechanical transmission, original roll cage 2 rear point 4 A X 524909 30 SOLARIS 1 - Standard 35, 45 Foldable central original roll cage, old engine, original cab 4 A X 338817 6-28-29-62 SOLARIS 1 - Standard 35 Foldable central original roll cage, new engine, original cab 4 A X 338796 6-29-62 SOLARIS 1 - Standard 45 Foldable central original roll cage, new engine, original cab 4 A X 338815 6-29-62 SHIBAURA SX - Standard 21, 24 Original roll cage 2 rear point 4 A X 523171 30 GK - R 200 Mechanical transmission, original roll cage 2 rear point 4 A X 531312 30 EB - Standard 3100 Original roll cage 2 rear point 4 A X X Xt 535490 6-30-55-30-147 SX - Standard 3100 Original roll cage 2 rear point 4 A X X Xt 535490 6-30-55-30-147 KE - Standard 140, 160 Original roll cage 2 rear point 4 A X 528314 30 EF - H 227, 230, 235 / M 233 Original roll cage 2 rear point 4 A X 522062 6-30-55 ST - Standard 318, 321, 324 ST - Standard 329, 333 S - HST 318, 320 / Standard 318, 320 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X 338779 30-55 Hydrostatic transmission, Mauser KS-329 cab, mechanical transmission, original roll cage 2 rear point 4 A X 338915 30-55 Hydrostatic transmission, mechanical transmission, original roll cage 2 rear point 4 A X 338778 5-30-55 S - Standard 325 Mauser KS-329 cab, mechanical transmission, original roll cage 2 rear point 4 A X 338915 5-30-55 S - HST 325, 33 Hydrostatic transmission, Mauser KS-329 cab, original roll cage 2 rear point 4 A X 338915 5-30-55 S - Standard 330 Original roll cage 2 rear point, VCI cab 4 A X 338915 5-30-55 S - Standard 435 Original roll cage 2 rear point, VCI cab 4 A X 339016 5-30-55 S - Standard 445, 455 Original roll cage 2 rear point, VCI cab 4 A X 337984 5-30-55 TYM T200 - HST T273 Original roll cage 2 rear point, without mid- mounted mower 4 A 511616 29-30-62-147-202 T300 - HST T353 Original roll cage 2 rear point 4 A X X Xt 511419 30-55-62-147 T3 - HST T503 / Mécanique T433, T503 Original cab, original roll cage 2 rear point 4 A X X 530960 55-62-112 T3 - HST T503 / Mécanique T433, T503 Original cab, original roll cage 2 rear point 4 A X X 530960 55-62-112-135 UNIVERSAL AUTRES GAMMES - Standard 4035, 4050 Foldable central original roll cage 4 A X 338547 37-55 VALPADANA VP1500 TIER 3 - Standard 1540, 1545, 1550 Foldable central original roll cage, Mauser cab, original cab 4 A X X Xt 510159 5-6-30-55-62-135-147 Front loaders & front linkages 1 - Brackets fit to clutch housing without support to rear axle. 5 - Exact make and model of cab or roll cage required. 6 - State if tractor is fitted with an original front linkage. 28 - To fit loader bracket drill the side of front casting as required. 29 - Hydraulic connection on original control valve only. 30 - If tractor with a mid-mounted mower, please contact us. 37 - MX valve preferred. 45 - Shock eliminator is mandatory. 49 - A small oil filter (ref. 24419470.0 supplied by SLH) is required to allow the bracket to fit correctly to the tractor. 55 - Non retractable MX joystick, positioned adjacent to right hand side of seat. 62 - Bracket designed for tractors with front linkage. 68 - Retractable MX joystick without armrest, positioned adjacent to right hand side of seat. 112 - For loaders with an electric 3rd function operated through the original tractor spool valves with an electric push button on the tractor joystick, we supply special wiring kit. 135 - If tractor has front linkage, it is mandatory for the loader to be equipped with advanced locking system. Consult us if re-fitting original equipment. 147 - In order to fit our front pto with transmission shaft, tractor has to be fitted with original mid mounted PTO. 202 - The MX C2 loader is not recommended onto this tractor. Xt Central transmission PTO 232 Recommendations for COMPACT loaders and front linkages 233

Loaders, linkages and weights Implements Order a pack C1/C2 packs Micro-loaders Standard pack: - Loader jib c/w 4 D/A rams - Tractor bracket - 2 function joystick (D/A+float) with direct control from valves near steering wheel (tractors with roll cage only) A MX C1 2670 MX C2* 3340 *Cable control joystick required for tractors with cab. Extra cost: 240. C3u pack Economical loader Standard pack: - Loader jib c/w 4 D/A rams - Tractor bracket - Hydraulic connection on original valves (2 D/A) A MX C3u 3690 NEW C3 pack User-friendly loader Standard pack: - Loader jib c/w 4 D/A rams - Automatic implement carrier - Tractor bracket - Hydraulic connection on original valves (2 D/A) A MX C3 4300 C3+/30C+ packs Loaders for professionals Standard pack: - Loader jib c/w 4 D/A rams - Self-levelling (1) - Automatic implement carrier - Tractor bracket - Hydraulic connection on original valves (2 D/A) A MX C3+ 5200 NEW MX 30C+ 5630 water capacity 0000 L 0000 L heaped capacity IMPORTANT : contact us for prior loader series (MX 20C, 20Cu, 25C, 25Cu, 30C) BRCu 120, BMSCu 130, BQU 120, BFCu 115 prior to April 2015 not compatible with C3u, C3 and C3+ loaders Loose material bucket - without teeth Multi-purpose bucket Width (mm) BRC 92 120 L 155 L 580 920 x BRC 118 (1) (can receive the grab GFC 118) 160 L 460 1200 x (1) BRC 120 / BRCu 120 (1) 160 L 210 L 630 1200 x (1) x x BRC 140 190 L 250 L 690 1400 x x BRC 160 210 L 270 L 760 1600 x BMSC 118 250 L 1 100 1200 x (1) BMSC 130 / BMSCu 130 (1) 296 L 1 420 1300 x (1) x x BMSC 150 342 L 1 490 1500 x 1 D/A function required Optional MACH 2 NS plug +100 MX C1/C2 MX C3u MX C3/C3+ MX 30C+ (1) CLEAR-LINK System only available on MX C3+ Order optional equipment C1 C2 C3u/C3/C3+/30C+ On original valves With Pack : included 1 st and 2 nd Not available Not available hydraulic function (lift + crowd) 2 D/A required : Without Pack : 280 With Pack : incl. With Pack : incl. Direct control 2 function monolever D/A + float - Without Pack : 520Without Pack : 520 Cable control 2 function monolever D/A + float - With Pack : 280 Without Pack : 800 With Pack : 520 Without Pack : 800 3 rd function (only with a Pack - for Retrofit, consult us) 460 460 460 Mach 2 Box - - 240 Plug - - 110 Shock Eliminator (loader/tractor shock absorber) - - 210 Anti-drop device (on the 4 rams) 280 280 330 Loader specific colour (consult us to know the available RAL-colour) 110 110 110 Individual prices Loaders Loader jibs only C1 C2 C3u C3 C3+ 30C+ Loader 1460 1460 2050 2660 3560 3820 Linkages A MX R05 1250 MX R08 1480 Optional PTO central transmission 980 MX hydraulic valve + Monolever 1200 2 DA + FP - Additionnal DA hydraulic line included Maximum width of blade : 1,50 m Tractor brackets Without hydraulics (- : not available) A MX C1 690 MX C2 / C3u / C3 / C3+ 1360 MX 30C+ 1530 Weights For 3 pt rear linkage category 1 M 250 500 M 400 720 4 in 1 bucket - without teeth Manure fork Top grab BQU 120 160 L 210 L 1 850 1200 x BQU 140 185 L 240 L 2 200 1400 x x 1 D/A function required Pallet carrier and forks Manubal (1) C1, C2 & 25 Cu are standard with pin-type hitch. 6 dismountable tines of Ø 25 mm BFC 110 (1) (Implement not designed for grab) 510 1000 x (1) BFCu 115 (1) (Implement not designed for grab) 830 1200 x (1) BFC 115 (can receive the grab GFC 120) 830 1200 x x dismountable tines of Ø 25 mm GFC 118 for BRC 118 (=BMSC 118) 640 1200 x GFC 120 for BFC 115 680 1200 x x dismountable tines of Ø 25 mm capacity of 800 kg maxi TRC 800 (anti-drop device mandatory) 620 1180 x x 2 spikes (35 x 860 mm) to pick up round or square bales Tine spacing: 750 mm Stacking height : 3 bales Optional MACH 2 NS plug +100 Optional MACH 2 NS plug +100 MANUBAL LC 30 270 750 x x Loaders, implements, weights & linkages

Individual tractor brackets & control systems Tractor brackets and control systems 236 Tractor brackets (without hydraulic kit <---> loader connection) Conversion kits R S T U AD 05 - for loader on FITLOCK 2+ AD FR AD05 (since 2005) AD90 (from 1990 to 2005) New loader retrofitting on a AD90 bracket : Loader in service to be fitted on a AD05 bracket : AD 90 ---> AD 05 Control selector loader/rear tractor couplers This kit enables the driver to operate either the loader ofr another rear equipment when using the tractor rear spool valves. (Important : since it is a universal kit, the fittings to the rear valves are not included) 700 1 850 2150 2470 2800 Fitlock 2+ Fitlock 1 For loaders MX 40.5, 60.5, 80.5, 100.5, 120.5, 150.5 MX T6, T8, T10, T12, T15, T406, T408, T410, T412, T414, T417, T418, MX 155.5 MX U303, U304, U305, U306, U307, U308, U309, U310, U312 SHOCK Eliminator Set of FITLOCK 2+ side beams 620 MX 40, 60, 80, 100, 120, 150, 155, T6s, T8s, T10s, T12s, 700 AD90 without frame : consult us 300 Electrical on/off 150 MX Joystick For original valve with electrical control To fit loader on original tractor valves, with electrical control, MX supply a specific joystick (refer to recommendations). See recommendations AD90 now available for a limited number of tractors. For loaders T15s, T406s, T408s, T410s, T412s, T417s MX 20 55, 20 70, 40 55, 40 70, 40 85, 6000 MX U305s, U306s, U307s, U308s, U309, U310s, U312s without SHOCK Eliminator with SHOCK Eliminator Fitlock 2+ Fitlock 1 FOCUS ON Le MACH System It consists of 2 parts c/w non drip NS flat couplers, the top which may be initially included with the loader and the base to be fitted on the tractor bracket. Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. - MACH clutch on loader in use 230 - MACH base for control system of a tractor in use 300 MACH clutch on the loader MACH base on the bracket Control system for loader in use* Connection to original tractor control valve 2 D/A hydraulic lines on original tractor spool valves (mechanical or electric) - Includes : 3 th and 4 th function electrical wiring - Options : MACH System base with new «non-drip» NS couplers SHOCK Eliminator (when loader in use equipped with a clutch) Original tractor valve kit 930 - Options : Control diverter valve kit (only on original tractor control valve) ACS electrical wiring on tractor (only on original tractor control valve) Electrical wiring for lifting/dumping safety system on tractor Tractor retrofitting 237 When ordering, Load-Sensing (LS) tractors must be mentionned - recommendations 10 and 63 WARNING : PROPILOT control valve 2 functions - 2DA + maintained floating position cable control - Includes : MACH System base with new «non-drip» NS couplers 3 th and 4 th function electrical wiring 3 button monolever (3F, 4F/SCS wiring) Multi-Arm System (according to recommendation 248 - see p.8) SHOCK Eliminator - Options : 6 buttons monolever (3F, 4F/SCS, FAST-LOCK/SPEED-LINK wiring, 2 auxiliary buttons) Electrical wiring for lifting/dumping safety system on tractor FLEXPILOT control valve 2 functions - 2DA + maintained floating position low pressure hydraulic control - Excepted MX F300 series - Includes : Integrated MACH System base with new «non-drip» NS couplers 3 th and 4 th function electrical wiring 6 button monolever (3F, 4F/SCS, ACS, FAST-LOCK/SPEED-LINK wiring, 2 auxiliary buttons) Multi-Arm System (according to recommendation 248 - see p.8) SHOCK Eliminator - Options : ACS electrical wiring on tractor Electrical wiring for lifting/dumping safety system on tractor TECHPILOT control valve 2 functions - 2DA + maintained floating position electronic control - Excepted U300 and F300 series - Included : MACH System base with new «non-drip» NS couplers 3 rd /4 th functions and ACS electrical wiring Flow restrictor for 3 rd/ 4 th functions and dumping 8 button monolever (3F, 4F/SCS, ACS, FAST-LOCK/SPEED-LINK wiring, On/Off, flow restrictor, 2 auxiliary buttons) Multi-Arm System (according to recommendation 248 - see p.8) SHOCK Eliminator - Options : Electrical wiring for lifting/dumping safety system on tractor ECOPILOT control valve 2 functions - 2DA + maintained floating position cable control - U300 series only - Not compatible with MACH System - Includes : 3 th and 4 th function electrical wiring 3 button monolever (3F, 4F wiring) Multi-Arm System (according to recommendation 248 - see p.8) - Options : SHOCK Eliminator ECOPILOT control valve kit 1390 - Options : 6 button monolever (3F/4F wiring, 2 auxiliary buttons) +100 Electrical wiring for lifting/dumping safety system on tractor +150 *For loaders other than F303, F304, T406, T408, T410, T412,T414, T417, T418, U303, U304, U305, U306, U307, U308, U309, U310 and U312 : consult us. Wiring looms & joysticks (depend on control system fitted on tractor) Original elec. control tractor valve (according to tractor recommendations) PROPILOT FLEXPILOT TECHPILOT ECOPILOT Control system fitted on tractor in use 3F 3F, 4F 3F, 4F, SCS 3F, 4F, SCS, Fast-Lock or Speed-Link mech. control +110 +110 +110 3F, 4F wiring loom +140 +140 +140 +140 +140 3F, 4F wiring loom + joystick +210 +210 +210 +210 +210 FAST-LOCK/SPEED-LINK wiring loom + button - - - +70 +70 1 button (before January 2000) +50 +110 +110 +210 2 buttons (after January 2000) +50 +50 +50 +210 4 buttons - - - - 3 buttons (after April 2013) - - - +160 6 buttons (after April 2013) - - - - 380 +250 +300 +700 +280 +150 1510 +100 +150 2430 +280 +150 3240 +150 1090 + 300 3F, 4F, SCS, Fast-Lock or Speed-Link, ACS 2 buttons +50 +50 +50 +210 +210 4 buttons - - - - - 6 buttons (after April 2013) - - - - - 6 buttons - - - - - 8 buttons (after April 2013) - - - - - 1 button (before January 2000) +50 +110 2 buttons (after January 2000) +50 +50 3 buttons (after April 2013) - - 6 buttons (after April 2013) - - +280 +280

Loader retrofit Individual loaders and options Loaders with Euro implement carrier (For Master-Attach, specify when placing the order) T400 series T406 T408 T410 T412 T414 T417 T418 Loader jib 4350 4710 5110 5690 6660 7200 7730 MACH with NS coupler (clutch) 170 170 170 170 170 170 170 On AD05 bracket PCH 620 620 620 620 620 620 620 3 rd Function 410 410 410 410 410 410 410 TOTAL 5550 5910 6310 6890 7860 8400 8930 T406s T408s T410s T412s T414s T417s Loader jib 4700 5110 5540 6140 7160 7670 MACH with NS coupler (clutch) 170 170 170 170 170 170 On AD90 bracket PCH 620 620 620 620 620 620 3 rd Function 410 410 410 410 410 410 TOTAL 5900 6310 6740 7340 8360 8870 U300 series U303 U304 U305 U306 U307 U308 U309 U310 U312 Loader jib 3040 3610 3190 3790 3380 4010 3770 4400 5090 On AD05 bracket MACH with NS coupler (clutch) 170 170 170 170 170 170 170 170 170 3 rd Function 410 410 410 410 410 410 410 410 410 TOTAL 3620 4190 3770 4370 3960 4590 4350 4980 5670 U305s U306s U307s U308s U309s U310s U312s Loader jib 3530 4300 3730 4520 4200 5000 5690 MACH with NS coupler (clutch) 170 170 170 170 170 170 170 On AD90 bracket 3 rd Function 410 410 410 410 410 410 410 TOTAL 4110 4880 4310 5100 4780 5580 6270 F300 series F303 F304 Loader jib 3200 3750 MACH with NS coupler (clutch) 170 170 On ADFR bracket 3 rd Function 410 410 TOTAL 3780 4330 Fitlock 2+ Fitlock 1 Flow restrictor To reduce the oil flow when crowding or dumping. Bale stacking remains under easier control. Optional equipment U300 series Lifting/dumping safety system According to the regulation EN12525-A2 2010, this device must be fitted when people are staying near the load while the loader is operated. If nobody is there, it can be switched off. It is compatible with the SHOCK Eliminator and the maintained float position. Only factory fitted loaders. 130 (T400 series 880 loaders only) MACH with «non-drip» NS couplers Extra cost if factory fitted Extra cost if loader in service* (RETROFIT) (clutch alone) - Hydraulic connection tractor <--> loader Incompatible with ECOPILOT 170 230 - Base (if not fitted on the tractor in use) +300 +300 3 rd function 410 410 4 th function - 4th function Fitted on loader or on implement - 3 rd function required Wiring loom for electrovalve on implement - 3 rd function required Flow restrictor - Required for bale handler (example : MANUBAL V60) - Included in TECHPILOT control system; not available for U300 series range MACH 2 with «non-drip» NS couplers (box + plug) 1 MACH 2 per hydraulic function 4F on loader: 500 4F on loader: 500 4F on implement: 410 (+ mandatory extra cost for electrical wiring on implement: +90) 4F on implement: 410 (+ mandatory extra cost for electrical wiring on implement: +90) 90 90 130 130 320 320 Box 220 220 Additional plug 100 100 Lifting/dumping safety system - Conform to standard EN12525-A2 2010 - Required as soon as someone stays near the load - C/w on/off electrical switch - Compatible with SHOCK ELIMINATOR - Compatible with float maintained position (MX controls launched before 2013) Loader side (price of the whole kit) 730 - FOCUS ON cab ON/OFF Combined implement carriers To use non MX implements, it s an easy swap MX/Euro implement carrier Not compatible with FAST-LOCK, SPEED-LINK2 and MX T418 AD05 with loader T400 ou U300 series Euro/SMS implement carrier Not compatible with SPEED-LINK2 and MX T418 SMS position AD90 with loader T400s or U300s (consult us) FOCUS ON 390 (when factory fitted) T400 series FAST-LOCK - Implement hydraulic locking/unlocking - PRO/FLEX/TECH control system or original elecro-hydraulic control valve required - 3 rd function required - Not compatible with combined implement carrier Implement carrier - Manual unhitching of implement Choice : MX or Euro Combined implement carrier Either: MX/Euro (except T418, FAST-LOCK, SPEED-LINK2) or Euro/SMS (except T418, SPEED-LINK2) 480 570-690 390 1 080 (precise if loader equipped with 3F or 4F) Specific loader colour (contact us re. RAL-colours available) 150 - PCH - Self-leveling by hydraulic compensation (T400 range only) 620 730 SPEED-LINK 2 (box only) Fully automatic hitching/unhitching of your implemnts c/w hydraulic & electric functions - PRO/FLEX/TECH control system or Original valves with electro hydraulic control is required - Except U300 series, F300 series and MX T418-3 rd function required 1500 - Plug for MX implement c/w bracket (factory fitted) 320 - Implement plug and bolt-on bracket for implement already in use - 640 ACS - Automatic return to preset implement position - PCH required - Except U300 series, MX F300 series, PROPILOT and mechanical original valves - Sensor and electrical wiring included Loader side Loader side 150 150 238 MX position Euro position Euro position Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. SCS - Synchronisation of grab and bucket movements - Except U300 series and F300 series - 3 rd function required 310 - - MACH System required MPE3 (Box unit & sensors) - Electronic weighing system - MACH System required - Static mode is not available with antidrop safety system 1590 1590 - For T400 line only MPE3 console 650 Sensors 940 940 *Precise serial number when ordering. Please call for loaders other than F303, F304, T406, T408, T410, T412,T414, T417, T418, U303, U304, U305, U306, U307, U308, U309, U310 and U312. Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. Loader retrofit 239

Barême General de conditions Port France of sale Introducing the Non Drip NS Flat Face Couplers for T400 series U300 series F300 series loaders APPLICABILITY The acceptance of our price offers or of our order receipts automatically implies the Buyer s unreserved acceptance of our general conditions of sale. These general conditions of sale nullify and replace all previous conditions and prevail over any other document previously released and, where applicable, over the Buyer s general conditions of sale if its provisions differ, in compliance with commercial practices. PRICES The prices applicable are those which correspond to our rates in place on the day of the order. Our prices are given excluding tax. There is a surcharge for packaging, transport and assembly. Any order duly placed, even if it does not come with a deposit, formally engages the Buyer in relation to the Seller. PAYMENT In the event of non-payment of a single deposit or invoice within its time limit, we reserve the right to demand immediate restitution of the products or material delivered, or the immediate payment of the entirety of the debt owed. All invoices not paid within the time limit will accumulate interest at the ECB s refinancing rate + 10 points, in accordance with the provisions of article L441-6 of the Commercial Code. In the event of recovery via legal proceedings, the sums owed shall be increased by 10% in order to cover the costs of the recovery procedure. In accordance with Articles L441-6 c. com and D.441-5 c. com, any delay in payment shall ipso jure and without the necessity of a reminder, in addition to the aforementioned late penalty fees, result in the debtor having to pay a fixed charge of 40 for debt collection costs. Our recovered bills of exchange are presented directly upon receipt. No discount shall be granted for early payment RETENTION OF PROPERTY The products sold remain the property of the Seller until full payment of the sum owed and, in accordance with provisions of article L621-122 of the Commercial Code, even in the event of the commencement of insolvency or legal liquidation proceedings. The Buyer pledges to bring this clause on the retention of property to the attention of its clients. The above provisions to not affect the transfer, which shall take place at the point of delivery or removal of the equipment from our warehouses, of risks of loss or deterioration of those products subject to the retention of property, as well as any damages they may cause. Consequently, the Buyer pledges to immediately take out insurance covering them, in particular, against risks of loss, theft or destruction of products. In the event of non-payment, be it total or partial, within any of the time limits set or in the event of the violation of this clause, the Buyer expressly permits the Seller to recover the products in stock or wherever they may be. These products shall be deemed to regard the invoices which have not been paid to our company. The restitution of unpaid products and material belonging to the company shall be carried out at the expense and risks of the Buyer within a maximum time period of 8 days, counting from the date of a registered letter with acknowledgement of receipt regarding the aforementioned circumstances, without affecting any damages and interest that our company may legally claim. WARRANTY Our equipment carries a warranty of one year from the date of invoice against all manufacturing deficiencies. This warranty is limited to the replacement of those parts acknowledged as being defective. This warranty is subject to the free-of-charge shipment return of defective parts which must be accompanied by a copy of the delivery receipt of the new replacement parts, the type and serial number of the equipment. Postage due returns of parts or equipment will not be accepted. This warranty does not apply to deterioration caused by unforeseen circumstances or a force majeure, poor maintenance or incorrect usage by the end user. Any suspension in the use of equipment due to the activation of the warranty, for any reason whatsoever, can in no case be grounds for a compensation or damages claim against the Seller. Any visit from a technician of the company on the request of the Buyer for reasons not covered by the warranty will be at the expense of the Buyer. JURISDICTION AND APPLICABLE LAW Litigation of any kind as well as any claim regarding the formation, execution or interpretation of the order or of these general conditions of sale shall be subject to the exclusive competence of those Courts under the jurisdiction of the High Court of Rennes. This clause shall be applied even in the case of referral, incidental claim, multiple defendants or activation of warranty without any contrary clauses which may feature in general conditions of sale preventing this application. French law is the law applicable to these general conditions of sale which, as stated above, prevail over any general conditions of sale which may contain contrary provisions. To improve product performance and respect the environment all MX MACH Systems (MACH 2000 and MACH 2) will be delivered with NS type flat face couplers from April 2013. The current ISO type couplers and not compatible with the new NS type couplers, hence for compatibility with MACH System before April 2013 a coupling modification kit will be required. Please refer to the chart below for further information and send orders to MX SPARE PARTS. Tel: +33 (0)2 99 62 28 87 - Fax: +33 (0)2 99 62 28 89 - Internet: www.m-x.eu. Apply standard spare parts general conditions of sale. ISO Couplers On original valves On MX Propilot / Flexpilot / Techpilot control valves On loader to connect implement MACH System MX delivered after April 2013 NS Couplers For connection to MACH System MX delivered before April 2013 The NS coupler kit to be required after April 2013 Female MACH 2000 (NS) Male MACH 2000 (ISO A) Kit 5 couplers reference: 527431 Price: 70 Male MACH 2000 (NS) Female MACH 2000 (ISO A) Kit 5 couplers reference: 527430 Price: 100 Female MACH 2000 (NS) Distributeur (ISO A) Kit 5 couplers reference: 527432 Price: 70 Valve unit (NS) Female MACH 2000 (ISO A) Kit 5 couplers reference: 527430 Price: 100 Mach 2 (NS) socket Mach 2 (ISO A) plug Kit 2 couplers reference: 527605 Price: 28 Mach 2 (NS) plug Mach 2 (ISO A) socket Kit 2 couplers reference: 527606 Price: 40 240 Loader performance 241

Packs U300 series Packs T400 Series Pack U300 series Control unit FOCUS ON... U310 loader Pack T400 series Control unit FOCUS ON... LoaderT410 *Except Pack ECOPILOT (not compatible); **according to recommendations 1 & 177 Packs U300 series (loader + bracket) All loaders are delivered as standard with the FITLOCK 2 System and the Euro implement carrier (for Master-Attach, specify when placing the order) Pack Original valves* U303 U304 U305 U306 U307 U308 U309 U310 U312 Without SL SL Without SL SL Without SL SL Without SL 5 690 6 260 5 840 6 440 6 030 6 660 6 420 7 050 7 740 Pack ECOPILOT 5 980 6 550 6 130 6 730 6 320 6 950 6 710 7 340 8 030 R Pack PROPILOT 6 270 6 840 6 420 7 020 6 610 7 240 7 000 7 630 8 320 Pack FLEXPILOT 7 190 7 760 7 340 7 940 7 530 8 160 7 920 8 550 9 240 Pack Original valves* 5 990 6 560 6 140 6 740 6 330 6 960 6 720 7 350 8 040 Pack ECOPILOT 6 280 6 850 6 430 7 030 6 620 7 250 7 010 7 640 8 330 S Pack PROPILOT 6 570 7 140 6 720 7 320 6 910 7 540 7 300 7 930 8 620 Pack FLEXPILOT 7 490 8 060 7 640 8 240 7 830 8 460 8 220 8 850 9 540 Pack Original valves* 6 310 6 880 6 460 7 060 6 650 7 280 7 040 7 670 8 360 Pack ECOPILOT 6 600 7 170 6 750 7 350 6 940 7 570 7 330 7 960 8 650 T Pack PROPILOT 6 890 7 460 7 040 7 640 7 230 7 860 7 620 8 250 8 940 Pack FLEXPILOT 7 810 8 380 7 960 8 560 8 150 8 780 8 540 9 170 9 860 Pack Original valves* Rear supports** MACH System* Bracket 6 640 7 210 6 790 7 390 6 980 7 610 7 370 8 000 8 690 Pack ECOPILOT 6 930 7 500 7 080 7 680 7 270 7 900 7 660 8 290 8 980 U Pack PROPILOT 7 220 7 790 7 370 7 970 7 560 8 190 7 950 8 580 9 270 Pack FLEXPILOT 8 140 8 710 8 290 8 890 8 480 9 110 8 870 9 500 10 190 Optional equipment SL SL Pack Original valves Loader c/w : - MACH System - Bracket - Hydraulic lines on original valves* Pack ECOPILOT Loader c/w : - ECOPILOT System monolever (2 functions - Da + Float.), 3 buttons - Multi-Arm System (according to recommendation 248 - see page 8) - Bracket Important : not compatible with MACH System Pack PROPILOT Loader c/w : - MACH System - PROPILOT System monolever (2 functions - DA + Float.), 3 buttons - Multi-Arm System (according to recommendation 248 - see page 8) - Bracket Pack FLEXPILOT Cable control Cable control Low pressure hydraulic control Loader c/w : - MACH System - FLEXPILOT System monolever (2 functions - DA + Float.), 6 buttons (2 auxiliary buttons included) - Multi-Arm System (according to recommendation 248 - see page 8) - Bracket SHOCK Eliminator page 7 300 3 rd Function 410 4 th Function 500 Wiring loom for electrovalve on implement 90 Mach System NS (on Original valve) clutch 170 page 7 - Tractor / loader hydraulic multicoupler (standard with PROPILOT & FLEXPILOT ; not compatible with ECOPILOT) base 250 MACH 2 NS - Loader / implement hydraulic multicoupler page 7 box 220 plug 100 FAST-LOCK - Hydraulic implement locking (except on mech. original valves & combined implement carrier ; 3 rd function required) page 7 480 6 buttons monolever (inc. 2 extra buttons) (standard with FLEXPILOT, optional with ECOPILOT & PROPILOT) 100 Combined implement carrier (MX-Euro) (not compatible with FAST-LOCK) Combined implement carrier (Euro-SMS) page 238 390 Lift/dump safety system c/w on/off electrical switch (compatible with SHOCK Eliminator & float position) page 239 880 Control diverter valve kit (universal kit for elec. controlled original valves) page 236 700 Loader specific colour (specify the RAL required) 150 Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. Shock Eliminator MACH System Bracket PCH System 3 rd function Packs T400 series (loader + bracket) All loaders are delivered as standard with the FITLOCK 2+ System and the Euro implement carrier (for Master-Attach, specify when placing the order) Pack Original valves* T406 T408 T410 T412 T414 T417 T418 8 330 8 690 9 090 9 670 10 640 11 180 - Pack PROPILOT 8 910 9 270 9 670 10 250 11 220 11 760 - R Pack FLEXPILOT 9 830 10 190 10 590 11 170 12 140 12 680 - Pack TECHPILOT 10 790 11 150 11 550 12 130 13 100 13 640 - Pack Original valves* 8 630 8 990 9 390 9 970 10 940 11 480 - Pack PROPILOT 9 210 9 570 9 970 10 550 11 520 12 060 - S Pack FLEXPILOT 10 130 10 490 10 890 11 470 12 440 12 980 - Pack TECHPILOT 11 090 11 450 11 850 12 430 13 400 13 940 - Pack Original valves* 8 950 9 310 9 710 10 290 11 260 11 800 - Pack PROPILOT 9 530 9 890 10 290 10 870 11 840 12 380 - T Pack FLEXPILOT 10 450 10 810 11 210 11 790 12 760 13 300 - Pack TECHPILOT 11 410 11 770 12 170 12 750 13 720 14 260 - Pack Original valves* 9 280 9 640 10 040 10 620 11 590 12 130 12 660 Pack PROPILOT 9 860 10 220 10 620 11 200 12 170 12 710 13 240 U Pack FLEXPILOT 10 780 11 140 11 540 12 120 13 090 13 630 14 160 Pack TECHPILOT 11 740 12 100 12 500 13 080 14 050 14 590 15 120 Optional equipment Pack Original valves Loader c/w : - MACH System - PCH System - 3 rd function* - SHOCK Eliminator * - Bracket - Hydraulic lines on original valves* Pack PROPILOT Loader c/w : - MACH System - PCH System - 3 rd function* - PROPILOT System monolever (2 functions DA + Float.), 3 buttons - Multi-Arm System (according to recommendation 248 - see page 8) - SHOCK Eliminator * - Bracket Pack FLEXPILOT Loader c/w : - MACH System - PCH System - 3 rd function* - FLEXPILOT System monolever (2 functions - AE + Float),6 buttons (inc. 2 extra buttons) - Multi-Arm System (according to recommendation 248 - see page 8) - SHOCK Eliminator * - Bracket Pack TECHPILOT Electrohydraulic control Loader c/w : - MACH System - PCH System - 3 rd function* - TECHPILOT System monolever (2 functions - DA + Float.), 8 buttons (inc. 2 extra buttons) - Multi-Arm System (according to recommendation 248 - see page 8) - Flow restrictor - ACS System - SHOCK Eliminator * - Bracket 3 rd Function (standar with Original valves/propilot/flexpilot/techpilot Packs) 410 4 th Function (flow restrictor required on MANUBAL V60) 500 Wiring loom for electrovalve on implement 90 Flow restrictor (required on MANUBAL V60) 130 MACH 2 NS - Loader / implement hydraulic multicoupler page 7 box 220 plug 100 FAST-LOCK - Hydraulic implement locking (except on mech. original valves & combined implement carrier ; 3d function required) page 7 480 SPEED-LINK 2 - Automatic implement hitching with hydraulic and electronic functions (box + plug) (except mech. original valves, T418) page 6 box 1500 plug 320 ACS - Implement return to preset position (except on PROPILOT, mech. original valves) page 7 430 SCS - Synchronized implement opening/dump 310 Electrical on/off for Shock Eliminator 150 6 buttons monolever (inc. 2 extra buttons) (standard with FLEXPILOT & TECHPILOT control systems, optional with PROPILOT) 100 Combined implement carrier (MX-Euro) (not compatible with FAST-LOCK, SPEED-LINK & T418) Combined implement carrier (Euro-SMS) (not compatible with SPEED-LINK, T418) page 238 390 Lift/dump safety system c/w on/off electrical switch (compatible with SHOCK Eliminator and float position) page 239 880 MPE 3 - MX wireless electronic weighing system 1 590 Control diverter valve kit (universal kit for elec. controlled original valves) page 236 700 Loader specific colour (specify the RAL required) 150 *Packs without : SHOCK Eliminator = -300 / 3 rd function = -410. Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see page 241. Cable control Low pressure hydraulic control PACKS

Packs F300 series Packs F300 series All loaders are delivered as standard with the Euro implement carrier (for Master-Attach, specify when placing the order) Technical data F300 series U300 series T400 series MX MX MX MX MX MX MX MX MX MX MX MX MX MX MX MX MX F303 F304 U303 U304 U305 U306 U307 U308 U309 U310 U312 T417/ T406 T408 T410 T412 T414 no self-leveling no self-leveling no self-leveling self-leveling no self-leveling self-leveling no self-leveling self-leveling no self-leveling self-leveling self-leveling T418 Tractor HP 50-120 ch 50-120 ch 35-65 ch 35-65 ch 45-70 ch 45-70 ch 60-90 ch 60-90 ch 75-110 ch 75-110 ch95-150 ch 45-70 ch 60-90 ch 75-110 ch 95-160 ch 120-180 ch 130-280 ch Maximum height at implement pivot* 3,20 m 3,20 m 3,50 m 3,50 m 3,75 m 3,75 m 3,85 m 3,85 m 4,00 m 4,00 m 4,15 m 3,75 m 3,85 m 4,00 m 4,15 m 4,50 m 4,60 m Maximum height under horizontal bucket 1 2,95 m 2,95 m 3,25 m 3,25 m 3,50 m 3,50 m 3,60 m 3,60 m 3,75 m 3,75 m 3,90 m 3,50 m 3,60 m 3,75 m 3,90 m 4,25 m 4,35 m Maximum height under dumped bucket 2 # 2,40 m 2,40 m 2,70 m 2,70 m 2,95 m 2,95 m 3,05 m 3,05 m 3,20 m 3,20 m 3,35 m 2,95 m 3,05 m 3,20 m 3,35 m 3,70 m 3,80 m Dumping angle at full height 3 # 48 48 52 52 55 52 55 55 55 52 55 52 55 55 55 50 50 Crowd angle 4 # 45 45 47 47 47 47 47 47 47 47 47 47 52 52 52 51 51 Digging depth 5 0,15 m 0,15 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m 0,20 m Lift capacity at implement pivot over 1550 kg 1550 kg 1600 kg 1600 kg 1900 Kg 1900 kg 2100 Kg 2100 kg 2400 Kg 2400 kg 2400 kg 1600 kg 2100 kg 2400 kg 2750 kg 2670 kg 3430 kg the full lift height* Lift force at implement pivot, ground level 1400 kg 1400 kg 1400 kg 1400 kg 1500 Kg 1500 kg 1900 Kg 1900 kg 2200 Kg 2200 kg 2200 kg 1250 kg 1890 kg 2190 kg 2450 kg 2320 kg 3050 kg over the full lift height* Payload on pallet 0.60m out on forks : 244 Pack Original valves* F303 F304 without SL - at ground level 950 kg 1200 kg 950 kg 1180 kg 1150 kg 1400 kg 1750 kg 1650 kg 1600 kg 1780 kg 1825 kg 1 450 kg 1 800 kg 2 080 kg 2 410 kg 2 360 kg 3040 kg - at 2m from ground level 875 kg 1175 kg 970 kg 1220 kg 1000 kg 1380 kg 1650 kg 1650 kg 1550 kg 1780 kg 1825 kg 1 380 kg 1 720 kg 2 000 kg 2 290 kg 2200 kg 2 820 kg - at 3m from ground level 770 kg 1175 kg 850 kg 1200 kg 900 kg 1350 kg 1650 kg 1550 kg 1525 kg 1780 kg 1825 kg 1 350 kg 1 630 kg 1 980 kg 2 230 kg 2 150 kg 2660 kg - at maximum height level 750 kg 1175 kg 850 kg 1180 kg 860 kg 1350 kg 1650 kg 1500 kg 1500 kg 1780 kg 1825 kg 1 350 kg 1 610 kg 1 960 kg 2 200 kg 2150 kg 2 550 kg Lifting lime 3 Sek 3 Sek 3,3 Sek 3,3 Sek 3,9 Sek 3,9 Sek 5,4 Sek 4,6 Sek 5,4 Sek 5,4 Sek 5,4 Sek 3,9 Sek 4,6 Sek 5,4 Sek 6,2 Sek 6,4 Sek 8,2 Sek Dumping time 1,4 Sek 1,4 Sek 1,4 Sek 1,4 Sek 1,4 Sek 1,4 Sek 1,8 Sek 1,8 Sek 1,8 Sek 1,9 Sek 1,9 Sek 0.7 Sek 1,0 Sek 1,0 Sek 1,4 Sek 1,4 Sek 1,4 Sek Weight (exc. implement) 375 kg 422 kg 400 kg 455 kg 445 kg 500 kg 475 kg 475 kg 510 kg 575 kg 595 kg 460 kg 480 kg 535 kg 550 kg 630 kg 660 kg / 697 kg Couplers re-equipment 3 with SL 5 850 6 400 R Pack PROPILOT 6 430 6 980 Pack Original valves* 6 150 6 700 S Pack PROPILOT 6 730 7 280 Pack Original valves* 6 470 7 020 T Pack PROPILOT 7 050 7 600 Pack Original valves* 6 800 7 350 U Pack PROPILOT 7 380 7 930 4 2 1 5 NEw Pack Original valves Loader c/w : - MACH System - Bracket - Hydraulic lines on original valves* Pack PROPILOT Cable control Loader c/w : - MACH System - PROPILOT System monolever (2 functions - DA + Float.), 3 buttons - Multi-Arm System (according to recommendation 248 - see page 8) - Bracket Data stated at : pressure 190 bars - flow 60 liters/min. These may vary according to tractor specifications. * Figures at ground level and implement pivot points cannot be considered as working data. # Values given with loose material bucket. For specifications of COMPACT loaders, refer to section Optional equipment SHOCK Eliminator p. 7 300 3rd Function 410 4rd Function 500 Wiring loom for electrovalve on implement 90 MACH System NS (on Original valve) clutch 170 p. 7 Tractor / loader hydraulic multicoupler (standard with PROPILOT) base 250 MACH 2 NS - Loader / implement hydraulic multicoupler p. 7 box plug 220 100 FAST-LOCK** - Hydraulic implement locking (except on mech. original valves & combined implement carrier ; 3 rd function required) p. 7 480 6 button monolever (optional mit der PROPILOT Einhebelbedienung) 100 Combined implement carrier (MX-Euro) (not compatible with FAST-LOCK) Combined implement carrier (Euro-SMS) p. 238 390 Lift/dump safety system c/w on/off electrical switch (compatible with SHOCK Eliminator & float position) p. 239 880 Control diverter valve kit (universal kit for elec. controlled original valves) p. 236 700 Loader specific colour (specify the RAL required) 150 **6 button monolever mandatory Check the type of couplers fitted on the tractor bracket, loader & implement(s) used - see p. 241. Find MXPower application on your tablet Find all MX apps on tht App Store and Google Play. More on the move with MX Play 4 MX applications MXpower on your tablet MXCONFIG Available soon App for configuring MX products based on the tractor to be equipped and for finding its recommended retail price in a few clicks. Program with reserved access, available on PC and tablet, online and offline. The access and connection methods will be sent to you later. MXSHAREFILE ShareFile is a safe uploading plateform where all the MX marketing & sale supports are made available for you : sales & technical brochures, tractor recommendations, prices, product benefits, benchmarking information, pictures, videos, product exploded views. *Please ask your login and password to your zone manager. Enjoy a practical and user friendly display of the MX loader technical data on your tablet. Also compare the old MX model spec. & performance with the latest ranges available. Last but not least, you can match the corresponding models of the competition via a secured passord & login. MXbalance MXBalance enables you to determine the counterweight required on the tractor of your next customer, another valuable marketing tool. Ballasting your tractor properly avoids tyre wear and saves petrol. Find all MX applications on And always in the dealer section on www.m-x.eu : Order tracing spare parts ordering litterature free ordering Permanent information on the latest tractors covered

teams at your service 19, rue de Rennes BP 83221 FR-35690 ACIGNE Please send your orders on the address orders@m-x.eu Sales director Gilles FAUVIN gfauvin@m-x.eu +33 (0)2 99 62 52 60 +33 (0)2 99 62 28 80 Export manager Guillaume HUGUET ghuguet@m-x.eu Zone managers Factory sales advisors +33 (0)2 99 04 30 88 Valérie BUSNEL vbusnel@m-x.eu Aurélie DELABROISE adelabroise@m-x.eu Isabelle DUPIN idupin@m-x.eu Marketing Coralie JAGU cjagu@m-x.eu +33 (0)2 99 62 23 81 tél : +33 (0)2 99 62 52 60 fax : +33 (0)2 99 62 50 22 email : contact@m-x.eu internet : www.m-x.eu +33 (0)7 77 69 02 84 (Rest of Europe, Oceania, Africa, Japan, Overseas) 33 (0)2 99 04 30 97 (French / English / German) 33 (0)2 99 62 28 81 (French / English / German) 33 (0)2 99 62 28 59 (French / English / Spanich) +33 (0)2 99 04 30 88 Spares and after-sale support 33 (0)2 99 62 28 87 +33 (0)2 99 62 28 89 Manager : Maxime BROCHARD mbrochard@m-x.eu Bruno HERFRAY bherfray@m-x.eu (Technical issues) Samuel SAUVE ssauve@m-x.eu (Spares) +33 (0)2 99 04 30 88 Elisaveta LISTUNOVA elistunova@m-x.eu +33 (0)6 27 85 14 96 (Baltic States, Belarus, Ukraine, Russia, Norway, Finland, Sweden, Bulgaria, Romania, Hungary) Romain CALVEZ rcalvez@m-x.eu +33 (0)6 11 97 22 89 (Czech Republic, Slowakia, Ireland, Poland, Uruguay, Chile, Serbia, Bosnia and Herzegovina, Croatia, Slovenia) Mailleux company copyright MX - 07/2015 MX se réserve le droit de modifier sans préavis les caractéristiques, équipements, et prix des modèles présentés. Cette documentation ne constitue en aucun cas un document contractuel. Reproduction même partielle interdite.