HT SERIES Trailer Air Suspensions Proven performance Proven productivity for every application
From the modern suspensi a design for every t HT Series Reliable, affordable, quality suspensions for years of dependable operation Top-Mount Air Suspensions HT190T, HT230T, HT250T and HT300T Available in 9 t, 10.4t, 11.1t and 13.6t capacities Ride heights from 304mm to 584mm High control versions available for certain models of all capacities Some models available for use with steerable axles Some models available for use with air disc brakes QUICK-ALIGN option available for all capacities HT250US is robotically welded design to promote consistent structural integrity Features and Benefits Designed for use with multiple brake sizes including 310 mm Multiple brake chamber orientations available TRI-FUNCTIONAL bushing with up to a three-year limited warranty* Three-year structural warranty* Off-the-shelf replacement parts * Contact your local Hendrickson representative for complete warranty terms, conditions and limitations. Y-Beam Air Suspensions HT250YS Next Generation Y-Beam 11.1t capacity 36kg lighter than original HT250Y Ride heights of 190mm to 228mm For use in conjunction with HT250US (11.1t) on applications such as lowboys, etc. Robotically welded design to promote consistent structural integrity Standard with the QUICK-ALIGN pivot connection HT300YB Y-Beam 13.6 t capacity Ride heights of 190mm to 228mm For use in conjunction with HT300UB (13.6 t) on applications such as lowboys, etc. Standard with the QUICK-ALIGN pivot connection Underslung Air Suspensions HT190U, HT250US and HT300U Available in 9t, 11.1t and 13.6t capacities Ride heights from 89mm to 431mm High control versions available for certain models of all capacities Some models available for use with steerable axles QUICK-ALIGN comes standard on the HT250US and is available as an option on other underslung models HT250US is robotically welded design to promote consistent structural integrity NEW HT250YS
on pioneer railer. Conventional Ride Heights Single-axle capacities from 9t 13.6t; ride heights from 305mm 585mm axle spacing from 1245mm 3100mm, tri- or quad-axle up to 3660mm. Low Ride Heights Single-axle capacities from 9t to 13.6t; ride heights as low as 89mm; excellent ground clearance on liftable models axle spacing from 1245mm to 3100mm. High Control Models For use on pup trailers and trailers with multi-articulation points like doubles, triples, B-trains, dollies and full trailers; 9t to 13.6t capacities; ride heights from 89mm to 585mm. Maximizing Cube MAXILIFT elevates high-cube, low deck trailers to standard dock height; suspension capacity of 9t at ride height and 7.7t when lifted. Available in 228mm ride height for fixed applications and 228mm 305mm ride heights for sliding applications. VANS PLATFORMS DUMPS DRY BULK TANKERS DOLLIES & PUPS LOWBOYS AUTO HAULERS TRAILERS ON FLAT CARS B-TRAINS MICHIGAN TRAINS CONTAINER CHASSIS LIQUID TANKERS GRAIN HOPPERS FORESTRY TRAILERS APPLICATIONS
Proven Design Superior Benefits Hendrickson stands behind you Unparalleled support Three-year structural warranty* Off-the-shelf replacement parts *See COMPREHENSIVE WARRANTY STATEMENT (Asian Warranty Statement 97117-167C). Contact your local Hendrickson representative for complete warranty terms, conditions and limitations. Lifts UBLs available for use on HT230, HT250T and HT300 suspensions CL, HTCL, VCL and HTBL lifts available for use on other models with 11t to 13.6t capacities Easily adjustable Center Lift available for HT250US models Side Beam Lift (SBL ) available for HT250US models Engineered to be trouble free Rigid trailing arm / solid axle connection Simplicity of design reduces the number of moving parts, bushings and fasteners for minimal maintenance Provides superior stability while eliminating torque rods and stabilizer bars Eliminates retorquing requirements Low spring rate for exceptional ride quality Compatible with industry standard axles Large bore shocks for longer life TRI-FUNCTIONAL Bushing Proven technology provides mile after mile of worry-free service Voids positioned to optimally absorb road forces UNDER BEAM LIFT (UBL ) Adds operational flexibility, helps extend tire life and improves maneuverability Combine with HT230, HT250T and HT300 No chains, cables or metal-on-metal parts to wear or bind The ideal combination of ride softness and roll stability Specially formulated rubber compound stands up to the toughest operating conditions Only two long-life bushings in each suspension no other design has fewer Up to three-year warranty depending on application HT250US Side Beam Lift (SBL ) Features and Benefits Lighter weight than current center lifts by up to 9kg (20 lbs.) Patent pending design Maximizes ground clearance, more efficient to mount and frees up the middle of the trailer Improved design to ease installation Does not limit axle spacing Lift mounts independent of the trailer frame Same high quality NEW QUICK-ALIGN (standard on most models) Provides quick, easy axle realignment Save time and money should axle realignment become necessary TORQ-RITE shear bolt eliminates guesswork Realign using standard tools no torque wrench or welding required Helps optimize tire life
Our workhorse suspensions deliver value and profits by the trailer load. Hendrickson HT SERIES trailer air suspensions stand out as true trucking industry workhorses. You will find hundreds of thousands of HT suspensions on the road under every type of trailer from vans to autohaulers, from platforms to pups. They deliver value and additional profits by the trailer load. Fewer parts and precise state-of-the-art manufacturing techniques give HT s unmatched durability and reliability. Their light weight allows you to haul more cargo. Their smooth ride provides superior protection for your cargo and equipment while also boosting your bottom line by cutting downtime. We pioneered modern suspension systems and continue to define the frontiers of suspension technology. Drawing from more than 95 years of industry leadership, we bring an unequaled level of skill and experience to the table. We use only the highest quality raw materials and componentry while employing leading-edge design, testing and manufacturing technologies such as finite element modeling, dynamic testing and robotic manufacturing. Known for their rugged dependability, we build HT air suspensions for every application, and HT handles them all mile after mile, year after year, on and off highway. Our patented TRI-FUNCTIONAL BUSHING in unison with a rigid beam and solid axle connection provides the ideal combination of ride softness and roll stability. This level of performance combined with our commitment to quality and innovation makes Hendrickson the most specified trailer air suspension around the globe. HT SERIES suspensions have it all. All the benefits Bigger payloads; low maintenance; outstanding ride quality for protection of cargo,equipment and drivers; superior stability. All the flexibility Primary suspensions in all ride heights, slider systems and fixed subframes. Unlimited installation configurations: single axles, lift axles, close space and wide spread. All the strength and reliability Rugged construction, proven performance on and off road, exacting quality control, industry-leading warranties.
We can satisfy your special requirements Suspension lift kits Other ride heights Electronic controls Trailer raising, lowering and deck lock technology Air controls Specialized suspension travel and dampening HT Primary Specifications Model Ride Height Capacity 1 (mm) 2 HT190T 9t (20,000 lb) 355-430 HT230 10.4 t (23,000 lb) 355-480 HT250T 3 11.1t (25,000 lb) 305-480 HT300 13.6 t (30,000 lb) 380-585 HT190U 9t (20,000 lb) 150-305 HT250US 11.1t (25,000 lb) 90-355 HT300U 13.6 t (30,000 lb) 190-430 HT250YS 11.1t (25,000 lb) 165-228 HT300YB 13.6 t (30,000 lb) 190-228 1 2 3 Capacity of primary suspension only, axle not included. Suspension ride heights must be set within Hendrickson specifications in order to ensure proper suspension performance. Failure to maintain proper ride height settings can lead to suspension, axle or trailer damage. Varying ride heights between suspensions may impact equalization. The HT250T is intended for use as a liftable suspension, in combination with other HT primary models. It may also be used in place of an HT230 when the application calls for high travel or lower ride height. Actual product performance may vary depending upon vehicle configuration, operation, service and other factors. For more information, call your trailer dealer or Hendrickson at +61 3 8792 3600 www.hendrickson.com.au Hendrickson Asia Pacific 32-44 Letcon Drive Dandenong South, Victoria, 3175, Australia Tel: +61 3 8792 3600 Fax: +61 3 8792 3699 Email: sales@hendrickson.com.au L632AU Rev F 09-12 Information contained in this literature was accurate at the time of publication. Product changes may have been made after the copyright date that are not reflected. 2012 Hendrickson USA, L.L.C. All Rights Reserved Printed in United States of America