Disconnect switches Contents Section page Description Compact Circuit Protector (CCP) disconnect switches Class CC, UL supplemental and IEC 0x38mm (CCP) -3 Class CF CUBEFuse (CCP-CF) 4-5 Compact Circuit Protector Base (CCPB) 6 Low profile Class CC and G, UL supplemental and IEC 0x38mm (CCPLP) 7-8 UL 98 fused disconnect switches, 30 to 800 A Introduction and agency information 9 Product line summary UL 0 30 A Class CC and compact Class J - 30 A standard Class J 3-4 60 A compact Class J 5-6 60 A standard Class J 7-8 00 A standard Class J 9-0 00 A and 400 A standard Class J -3 600 A standard Class J and 800 A Class L 4-5 UL 98 non-fused disconnect switches, 30 to 00 A Introduction, agency information and product line summary IEC 6 Product line summary UL 7 30 A, 60 A and 00 A compact 8-9 00 A, 00 A and 400 A standard 30-3 600 A, 800 A, 000 A and 00 A standard 3-33 UL 508 non-fused disconnect switches, 6 to 80 A Introduction and agency information 34 Product line summary 35 6 A, 5 A, 40 A, 63 A and 80 A standard 36-38 Enclosed UL 98 and UL 508 disconnect switches Bussmann series Compact Circuit Protector (CCP) with CUBEFuse helps increase assembly SCCR in a compact, finger-safe design Introduction and agency information 39 Fused UL 98 enclosed disconnects, 30 to 800 A 40-4 Non-fused UL 98 enclosed disconnects, 30 to 00 A 4-43 Non-fused UL 508 enclosed disconnects, 6 to 80 A 44-45 Eaton.com/bussmannseries - BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Disconnect switches 00 ka SCCR in /3 the footprint of traditional fusible switches
Disconnect switches CCP Compact Circuit Protector fused disconnect switches for ferrule fuses With a small footprint, the CCP fused disconnect switch offers many advantages over other fused disconnects. Available in -, - and 3-pole versions, this smaller size CCP is offered in UL Class CC, UL supplemental and IEC 0x38mm fuses versions. Ratings See catalog number table Agency information Class CC fuse versions UL 98 Listed, Guide WHTY, File E30370 culus to CSA Standard. No. 4-04, Guide WHTY7, File 30370 UL midget and 0X38mm IEC fuse versions UL 508 Listed, Guide NRNT, File E3030 culus Certified. No. 4-05 IEC 60947-3 AC3A IEC 60947-3 DC3A RoHS compliant CE 0/65/EU Terminals Single/dual conductor box lug Fork terminal suitable for line, load or accessory connection Storage and operating temperature -0 C to 75 C* * For fuse performance under or above 5ºC, consult fuse performance derating charts in the Eaton publication titled Selecting Protective Devices (SPD), reorder #300. Lockout/tagout provisions 4mm shank lock or Brady pin-out device, part number 90850 Mounting 35mm DIN-Rail Local open fuse indication minimum voltage** 90 Vac for AC versions, Vdc for DC versions ** Open fuse indication requires an open fuse to be in the CCP and the switch in the ON position. Features IP0 Finger-safe construction with 0 AWG or larger wire interlock prohibits removing the fuse under load Accessories Auxiliary contacts PLC wired remote fuse indication -, - and 3-pole, Class CC, UL midget and 0x38mm IEC Fuse Max. Hp* (Vac) Conductors Amps class Poles Volts SCCR 0 40 480 600 AWG size Type Agency info. 0.5 CCP--30CC 30 CC 600 Vac 00 ka UL 98 Listed, culus., No. 4-04 CCP--30CC 3 0.75 3 5 7.5 CCP-3-30CC 30 UL Midget 40 Vac 0 ka CCP--30M 3* IEC 0x38 400 Vac 0 ka 30 3* 30 3* UL Midget IEC 0x38 UL Midget IEC 0x38 3 40 Vac 0 ka 400 Vac 0 ka 40 Vac 0 ka 400 Vac 0 ka 30 CC 80 Vdc 0 ka 30 CC 3* IEC 0x38 80 Vdc 0 ka * 3 A Class am, 5 A Class gg. SCCR May be lower, refer to installed fuse data sheets. Fork terminal with a 4.3mm gap for a #8-3 stud, 30 A max, insulated flange, wire size -0 AWG. 8-0 AWG; 0 lb-in.3n m, 8-4 AWG; 35 lb-in 4.0N m Data sheet no. 57 Single/dual; 8-6 Sol/Str UL 508 Listed, culus., No. 4-05 CCP--30M Single; 4 Sol/Str 75 C Cu IEC 60947-3, AC-3A or higher Fork terminal CCP-3-30M Available Bussmann series fuses UL 98 Listed, CSA., No. 4-04 UL 508 Listed, culus., No. 4-05 IEC 60947-3, DC-3A CCP--DCC CCP--DCM Fuse class Type/description Fuse class Type/description LP-CC time-delay, current limiting Midget FNM time-delay CC FNQ-R time-delay FNQ time-delay KTK-R fast-acting KTK fast-acting gg/gl C0G BAF fast-acting am C0M KLM fast-acting - BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches CCP Compact Circuit Protector fused disconnect switches for ferrule fuses Dimensions mm (in) 45 (.8) 7.5 (0.7) 5.5 (.) 35 (.4) 49. (.9) 79.8 (3.) Disconnect switches 9.7 (3.7) handle Fuse holder knob Padlock provision Circuit marking area Open fuse indication light Fork terminal Box lug terminal Auxiliary contacts PLC indicator (Includes leads with spade terminals) CCP-_-30_ accessories Description Max. per CCP Signal output Auxiliary contacts NO+NC for switch status per CCP (-, - or 3-pole) 5 A/40 Vac PLC fuse monitor for open fuse indication * Refer to data sheet no. 57 for details. per CCP (-, - or 3-pole) 4 Vdc/ 0m A 00 Vac Min. circuit voltage Agency information UL 98 Recognized, curus. No. 4-04, IEC 60947-5- AC5 UL 98 Recognized, curus. No. 4-04 CCP- AUX* CCP-PLC-IND* BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Data sheet no. 57 Eaton.com/bussmannseries -3
Disconnect switches CCP Compact Circuit Protector CUBEFuse disconnect switches With a small footprint, the CCP fused disconnect switch offers many advantages over other fused disconnects. Available in -, - and 3-pole versions, the CUBEFuse CCP is offered in a larger size for the UL Class CF CUBEFuse available in time-delay and fastacting versions in ratings from to 00 amps. Agency information UL 98 Listed, Guide WHTY, File E30370 culus to CSA Standard. No. 4-04, Guide WHTY7, File 30370 RoHS compliant CE Terminals 0/65/EU Single/dual conductor box lug or spade terminal suitable for line, load or accessory connection Lockout/tagout provisions /4" shank lock Mounting 35mm DIN-Rail Local open fuse indication minimum voltage 90 V Open fuse indication requires an open fuse to be in the CCP and the switch in the ON position. Features Ampacity rejecting disconnects will not accept CUBEFuse amp ratings greater than switch rating IP0 Finger-safe construction with 0 AWG (6mm ) wire or larger Built-in switch interlock capability prohibits removing the fuse under load Accessories Auxiliary contacts PLC wired remote fuse indication CUBEFuse pullers (P/Ns: CFP-30, CFP-60, CFP-00) Fuses Time-delay CUBEFuse, see data sheet no. 9000 Fast-acting CUBEFuse, see data sheet no. 47 Storage and operating temperature -0ºC to 75ºC*** *** For fuse performance under or above 5ºC, consult fuse performance derating charts in the Bussmann Division publication Selecting Protective Devices (SPD) document no. 300. SCCR Max. Hp (Vac)* Conductor Amps Poles Volts (ka) 0 40 480 600 AWG size** Type Agency information 600 Vac 00.5 CCP--30CF 30 5 Vdc 00 3 Single/dual; 8-6 Sol/Str CCP--30CF 3 600 Vac 00 5 5 0 CCP-3-30CF Single; 4 Sol/Str 600 Vac 00 3 CCP--60CF Fork terminal 75 C Cu UL 98 Listed 60 5 Vdc 00 7.5 CCP--60CF or higher 3 600 Vac 00 7.5 0 0 culus., No. 4-04 CCP-3-60CF 00 600 Vac 5 Vdc 00 00 5 0 Single; 8-0 Sol/Str, 8- Str Dual; 6 Str CCP--00CF CCP--00CF 3 600 Vac 00 0 50 50 Fork terminal CCP-3-00CF * With time-delay Low-Peak CUBEFuse. ** 30-60 A 8-0 AWG 0 lb-in, 8-6 AWG 35 lb-in, 4 AWG 35 lb-in, 70-00 A 8-0 AWG Single 5 lb-in, 8- AWG Single 35 lb-in, 6 AWG Dual 45 lb-in. Fork terminal with a 4.3mm gap for a #8-3 stud, 30 A max, insulated flange, wire size -0 AWG. Up to 40 A max, >40 A is 4 Vdc. Up to 80 A max, >80 A is 4 Vdc. Data sheet no: 57-4 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches CCP Compact Circuit Protector CUBEFuse disconnect switches Dimensions mm (in) 5. (.0) 50.4 (.0) 75.7 (3.0) 5.5 (.0) 50.5 (.0) 79.5 (3.0) 75. (3.0) 49. (.9) 60.3 (.4) 30A CUBEFuse 83.3 (3.3) 60A CUBEFuse 89. (3.5) 9. (0.4) 56.6 (.) 9. (3.6) 67.7 (.7) 00.0 (3.9) Disconnect switches 30 and 60 amp 3.9 (4.5) 7.6 (0.3) 00 amp 47. (5.8) Circuit marking area handle Fuse holder Padlock provision Open fuse indication light Fork terminal Box lug terminal CCP-_-_CF accessories Auxiliary contacts PLC indicator (Includes leads with spade terminals) Description Auxiliary contacts NO+NC for switch status up to 60 A Auxiliary contacts NO+NC for switch status 70 to 00 A PLC fuse monitor for open fuse indication up to 60 A PLC fuse monitor for open fuse indication 70 to 00 A * Refer to data sheet no. 57 for details. Max. per CCP per CCP (-, -, 3-pole) Signal output Min. circuit voltage Agency information UL 98 Recognized, curus. 5 A/ 40 Vac No. 4-04, IEC 60947-5- AC5 CCP- AUX* UL 98 Recognized, CSA C. No. 4 CCP- AUX-00* 4 Vdc/ 0mA 00 Vac UL 98 Recognized, curus. No. 4-04 CCP-PLC-IND* UL 98 Recognized, CSA C. No. 4 CCP-PLC-00* BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Data sheet no: 57 Eaton.com/bussmannseries -5
Disconnect switches CCPB Compact Circuit Protector Base fused branch circuit disconnect Local indication Illumination requires closed circuit and minimum 90 V The Bussmann series CCPB is based upon the CCP-CF with modifications specific for application in fused panelboards as a branch circuit disconnect. It is most commonly used in the Bussmann series Quik-Spec Coordination Panelboard. Available in -, - and 3-pole versions, the CCPB features amp rating breaks that coincide with common conductor ampacities. As such, the CCPB is a rejection fused switch and will accept any CUBEFuse amp rating up to the switch's, but not more. This unique feature helps prevent overfusing the circuit and promotes electrical safety. For the most current information on these switches, please visit our website Eaton.com/ bussmannseries. Ratings Volts Up to 600 Vac Up to 5 Vdc 0/65/EU Features Uses finger-safe Class CF time-delay or fast-acting CUBEFuse High 00 ka short-circuit current ratings Disconnect rated to provide means for load isolation Full voltage rated at 600 Vac and 5 Vdc UL 98 Listed and suitable for branch circuit disconnect and branch circuit protection -, - and 3-pole versions are horsepower rated Patented rejection feature helps prevent overfusing Complies with UL and culus Open fuse indication light per pole Additional open fuse indication can be provided by using the indicating CUBEFuse version Built-in switch/fuse interlock prohibits removing the fuse while energized Permanent lockout/tagout provisions Amps/rejection breaks 5, 0, 30, 40, 50, 60, 70, 90 and 00 amps SCCR 00 ka AC 00 ka DC Agency information UL 98 Listed, Guide WHTY, File E30370, culus to CSA Standard. No. 4, Guide WHTY7, File E30370 RoHS compliant CE Buss connector Bolt-on 0-3 UNC hex flange Phillips screw, torque to 5 lb-in (.8N m) Loadside terminals/ AWG conductors Box lug (75 C, Cu/Al) 8-6 single and dual rated, solid or stranded 4 single Torque, 8-0 0 lb-in (. N m), 8-4 35 lb-in (3.9 N m) The CCPB fused branch circuit disconnect is used in the Bussmann series Quik-Spec Coordination Panelboard. For details, see the QSCP in Section. Loadside fork terminal Max. 30 A suitable for use with #8-3 screw Fuses Time-delay CUBEFuse Fast-acting CUBEFuse Data sheet no: 6-6 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches CCPLP UL 98 Listed low profile Compact Circuit Protector The revolutionary Bussmann series low profile Compact Circuit Protector (CCPLP) is a UL 98/508 Listed fused disconnect switch. This panel mount switch is available in -, - and 3-pole versions, and has the smallest footprint of any fused disconnect switch. It features an SCCR up to 00 ka to help improve equipment SCCR. Four fuse types 0/65/EU The CCPLP is available for UL Class CC and G, UL supplemental (3/3 x -/ ) and IEC 0x38mm fuses. Class CC and G versions are easily selectively coordinated with the upstream Bussmann series CUBEFuse using published fuse ampacity ratio tables. Agency information Class G fuse versions UL 98 Listed, Guide WHTY, File E30370 IEC 60947-3 AC-3A Class CC fuse versions UL 98 Listed, Guide WHTY, File E30370 culus to CSA Standard. No. 4-04, Guide WHTY7, File E30370 IEC 60947-3 AC-3A UL supplemental and IEC 0x38mm fuse versions UL 508 Listed, Guide NRNT, File E3030 culus Listed to CSA. No. 4-05, Guide NRNT7, File E3030 IEC 60947-3 AC-3A RoHS compliant CE Disconnect switches Design/application flexibility The CCPLP is easily integrated into many panel designs and provides a high SCCR alternative to low profile circuit breakers on the market. Ratings Volts 600 Vac (Class CC up to 30 A, Class G 0 A) 550 Vac (0x38mm IEC Class am 0.6-6 A) 500 Vac (0x38mm IEC Class gg 0.5-5 A) 400 Vac (0x38mm IEC Class am 0-3 A, gg 3 A) 40 Vac (3/3 x -/ UL supplemental 30 A) Amps Up to 30 A (UL) Up to 3 A (IEC) SCCR 00 ka (Class CC) 0 ka (0x38mm IEC Class gg and am) 00 ka (Class G) 0 ka (3/3 x -/ UL supplemental) Frequency 50/60 Hz Impulse voltage 8 kv Terminals and conductors 75 C/90 C Cu Screw terminal, 0-3 phil-slot screw with external tooth lock washer (use with properly rated/ul Listed ring or fork terminal) Pressure plate terminal, 0-3 phil-slot screw (single -6 AWG solid or stranded) Ambient storage and operating temperature -0 to 90 C, 85% relative humidity, non-condensing Poles -, - and 3-pole factory configured* Safety Finger-safe IP0 from panel front Mounting Front panel mounting with customer supplied M3 screws Open fuse indication* Local open fuse indication provided for each pole by an orange neon lamp (minimum 90 V) * Open fuse indication requires an energized, closed circuit with an open fuse in the CCPLP and the switch in the ON position. Lockout/tagout provision Brady pin-out device, part number 90844 Circuit labeling provision Accepts up to two universal marker labels, catalog number TM6CB Carton quantity poles (-pole: units, -pole: 6 units, 3-pole: 4 units) Minimum enclosure size 6 x 6 x 4 per UL 98 Listing * - and 3-pole versions supplied as ganged switches with phase barriers. BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Data sheet no.037 Eaton.com/bussmannseries -7
Disconnect switches Available CCPLP versions SCCR Horsepower (Vac) Screw terminal Pressure plate terminal Poles Volts AC Amps (ka) 0 40 480 600 UL Class G fuse CCPLP--0G-S CCPLP--0G-P CCPLP--0G-S CCPLP--0G-P 600 0 00 CCPLP-3-0G-S CCPLP-3-0G-P 3 UL Class CC fuses CCPLP--30CC-S CCPLP--30CC-P 0.5 CCPLP--30CC-S CCPLP--30CC-P 600 30 00 CCPLP-3-30CC-S CCPLP-3-30CC-P 3 3 4 7. 5 UL 3/3 x-/ midget fuses CCPLP--30M-S CCPLP--30M-P CCPLP--30M-S CCPLP--30M-P 40 30 0 CCPLP-3-30M-S CCPLP-3-30M-P 3 IEC 0x38 gg and am fuses CCPLP--30M-S CCPLP--30M-P gg fuses: 0 CCPLP--30M-S CCPLP--30M-P up to 5 A @ 500 V 3 A @ 400 V am fuses: 0 CCPLP-3-30M-S CCPLP-3-30M-P 3 up to 6 A @ 550 A 0-3 A @ 400V 0 handle (ganged on - and 3-pole versions) Fuse access door Open fuse indicating light Mounting holes for customer supplied M3 screws Lockout/tagout provision* Circuit marking area Phase barrier 0/3 phil-slot screw or pressure plate terminal * Use Brady pin-out device, P/N 90844 Available Bussmann series fuses Fuse class CC G M gg am Catalog symbol FNQ-R, KTK-R, LP-CC SC BAF, FNM, FNQ, KLM, KTK C0G C0M Data sheet no.037-8 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches UL 98 fused disconnect switches up to 800 A Bussmann series UL 98 and UL 489 fused disconnect switches break and make power circuits ON and OFF load. The switches employ double break contacts per pole that help ensure complete isolation of the fuse when the switch is in the "OFF" position. Agency information UL 98, Guide WHTY, File E5530 UL 489, Guide WJAZ, File E35980 CSA. No. 4, File 5700 Conforms with IEC 60947-3 Disconnect switches NFPA 79 Features Make and break power under load Double break by pole 30-60 A DIN-Rail or panel mount, 00-800 A panel mount only Up to 00 ka short-circuit current rating Finger-safe covers Compact footprints available Defeatable handles automatically re-latch when the panel door is closed Most disconnect switches are front, right side, flange or direct handle operable NFPA 79 compliant handle kits Online resources available at Eaton.com/bussmannseries CAD drawings Instruction sheets UL information Available Bussmann series fuses Fuse class CC J L BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Catalog symbol/type LP-CC time-delay, current limiting FNQ-R time-delay KTK-R fast-acting LPJ time-delay, current limiting JKS fast-acting fuses DFJ high speed drive fuse KRP-C time-delay, current limiting KTU fast-acting KLU time-delay KRP-CL (5-600 A) Eaton.com/bussmannseries -9
Disconnect switches UL 98 fused disconnect switches 30 to 800 A RDF30CC-3 RDF30J-3 / RDF60J-3-COMP RDF60J-3 RDF00J-3 RDF600J-3 Poles -pole RDF30J- RDF60J--COMP RDF60J- RDF00J- RDF00J- RDF400J- RDF600J- RDF800L- 3-pole RDF30CC-3 RDF30J-3- COMP RDF30J-3 RDF60J-3-COMP RDF60J-3 RDF00J-3 RDF00J-3 RDF400J-3 RDF600J-3 RDF800L-3 RDF30J- 3-pole + neutral RDF30CC-3N 3N-COMP 4-pole RDF30J-4 RDF60J-4-COMP RDF60J-4 RDF00J-4 RDF00J-4 RDF400J-4 RDF600J-4 RDF800L-4 UL standard UL 489 UL 489 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 Fuse class CC J J J J J J J J L Max fuse/ampacity 30 30 30 60 60 00 00 400 600 800 type Compact Compact Standard Compact Standard Standard Standard Standard Standard Standard Handle operation Front Front Front/Side Front/Side Front/Side Front/Side, Front/Side, Front/Side, Flange Flange Flange Front, Flange Front, Flange UL electrical ratings Max AC volts 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac Max DC volts* 50 Vdc 50 Vdc 50 Vdc 50 Vdc 50 Vdc 600 Vdc 600 Vdc -phase, 40 3 0 0 0 0 0 Std. AC Hp 3-phase, 40 3 3 3 7.5 7.5 5 5 50 75 75 ratings 3-phase, 480 5.0 5.0 5.0 5 5 5 50 00 50 00 3-phase, 600 7.5 7.5 7.5 5 5 30 60 5 00 50 Max. AC Hp ratings DC Hp ratings 3-phase, 40 7.5 7.5 7.5 5 5 30 60 5 00 00 3-phase, 480 5 5 5 30 30 60 5 50 400 500 3-phase, 600 0 0 0 50 50 75 50 350 500 500 5 Vdc 3 5 5 7.5 0 50 Vdc 5 0 0 0 50 Electrical characteristics SCCR 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka Terminal lugs/kits Integral Integral Integral Integral Integral Integral Mounting torque - lb-in (N m) 60 (8) 30 (35) 30 (35) 30 (35) Wire type 75 C Cu 75 C Cu 75 C Cu 75 C Cu 75 C Cu 75 C Cu 75 C Cu/ Al 75 C Cu/ Al 75 C Cu/ Al 75 C Cu/ Al Wire range, torque - lb-in (N m) Solid Stranded 4-0, 7 (3.) 4-0 7 (3.) 4-0, 7 (3.) 4-0 7 (3.) 4-0, 3 (3.5) 4-6, 3 (3.5) 4-0, 3 (3.5) 4-6, 3 (3.5) -0, 35.4 (4) -, 35.4 (4) -0, 35.4 (4) -, 35.4 (4) 6-300 kcmil, 75 (3) 4-600 kcmil, 550 (6), Dual /0-50 kcmil 550 (6) () -600 kcmil, 375 (4.4) Mechanical characteristics Endurances/cycles 0,000 0,000 0,000 0,000 0,000 0,000 8000 6000 5000 5000 Physical characteristics Dimensions Weight - lbs (kg) () -600 kcmil, 375 (4.4) See drawings on product pages -pole 3.0 (.3) 3. (.4) 4. (.8) 4. (.8) 5.7 (.6).4 (5.) 3.7 (4.4) 3.7 (4.4) 3-pole.3 (0.6).4 (0.6) 3.8 (.7) 4. (.8) 5.3 (.4) 5.3 (.4) 7.8 (3.5) 6.6 (7.6) 44. (0.) 44. (0.) 3-pole + neutral.4 (0.6).5 (0.7) 4-pole 4.7 (.) 4.8 (.) 6.49 (.9) 6.49 (.9) 0.8 (4.9).8 (9.9) 56.8 (5.8) 56.8 (5.8) Environmental Operating temp. range -0-70 C -0-70 C -0-70 C -0-70 C -0-70 C -0-70 C -0-70 C -0-70 C -0-70 C -0-70 C Flammability rating UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 Accessories Lug Kit Integral Integral Integral Integral Integral Integral Direct Front Handles selector Front pistol Side pistol Cable Flange Shaft NFPA through door handle Shafts c/s - mm 5x5 5x5 0x0 0x0 0x0 0x0 0x0 0x0 X X Terminal shrouds Not Not Not Required Required Required Not Required Not Not Required Required Auxiliary () NO contacts () NC Volts 600 600 600 600 600 600 600 600 600 600 AC ratings Amps 0 0 0 0 0 0 0 0 0 0 Available, see product page for details and catalog numbers. Not available. * General purpose only, not photovoltaic rated. -0 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches UL 98 fused rotary disconnect switches 30 A Standard 30 amp Class CC and compact 30 amp Class J For a complete assembly, select: Fuse SCCR Max Hp rating, 3-phase Conductor Amps class Poles (ka) 0/40 440/480 600 AWG size /type 30 3 00 7.5 5 0 RDF30CC-3 CC 30 3 + Ntrl.* 00 7.5 5 0 4-0 Sol/Str RDF30CC-3N 30 3 00 7.5 5 0 75 C Cu RDF30J-3-COMP J 30 3 + Ntrl.* 00 7.5 5 0 RDF30J-3N-COMP * Neutral is switched. Plus Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable RDF30CC-_ RDF30J-_-COMP Y Y DIR-05 DIR-06 Disconnect switches Select for standard applications Handle + or External front operated selector handle - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-04B N Y Y, 3R, 4, 4X, Red/yellow H4X-04R Shafts for selector handles Length - in (mm) Mounting depth (X) - in (mm) 7.9 (00) 4.0~9.65 (0~45) SH-00.6 (30) 4.0~4.37 (0~365) SH-30 5.7 (400) 4.0~7.5 (0~445) SH-400 External front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, H-05B, 3R, Red/yellow H-05R N, 3R, 4, 4X, H4X-05B Y Y, 3R, 4, 4X, Red/yellow H4X-05R, 3R, 4, 4X, H4X-05TB Y, 3R, 4, 4X, Red/yellow H4X-05TR Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-05BHD N Y Y, 3R, 4, 4X, Red/yellow H4X-05RHD + Shafts for pistol handles Length - in (mm) Mounting depth (X) - in (mm) 7.9 (00) 4.0~9.65 (0~45) SH-00.6 (30) 4.0~4.37 (0~365) SH-30 5.7 (400) 4.0~7.5 (0~445) SH-400 NFPA through the door handle kit - to be used with front pistol handle Color Test function Padlockable Defeatable Red N Y N H79- Accessories Auxiliary contacts AND... Auxiliary contacts Contact No. of Continuous Maximum number of auxiliary contacts per type contacts amp rating Voltage (Vac) disconnect switch catalog number NO RDF30CC-_: 4 / 8 with BAC-HOLDER BAC05 () NC 0 600 BAC05 () RDF30J-_-COMP: /6 with BAC-HOLDER BAC06 () Auxiliary contact holder Accepts 4 Auxiliary contacts: BAC05 or BAC06 BAC-HOLDER () BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -
Disconnect switches Dimensions in (mm) RDF30CC-_ 3.8 83.3. 8.5 3.78 96.47 37.5 0.59 5 3.3 84 4.56 6 5.5 5.9 (3.8) Fuse Cover Fully Open RDF30J-_-COMP 3.89 99. 8.5 4.3 05.47 37.5 0.59 5 3.3 84 4.56 6 5.5 External front selector handle Selector handle type Direction of front operation I.57 40 Door drilling layout Ø3.07 Ø78 90 4 Ø 0.7 4 Ø 7 0. 3 3.46 88 0.0 8 0.53 3.5 H4X-04_.45 37 Ø. Ø 3 With 4 Mounting Screws Ø 0.88 Ø.5 With mounting nut External front pistol handles Pistol handle type Ø3.07 Ø78 Direction of front operation 90 I Door drilling layout 4 Ø 0.7 4 Ø 7 Ø.46 Ø 37 0.78 0.75 70 0 H4X-05 H-05.73 44 65 TEST 0.55 4 0.55 4 0.78 0 - BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Standard 30 amp Class J For a complete assembly, select: Max horsepower rating Fuse SCCR -phase 3-phase DC* Conductors Amps class Poles (ka) 0/40 0/40 440/480 600 5 50 AWG size / type 30 J 3 - - - 3 5 RDF30J- 4-0 Sol/4-6 Str 3 00-7.5 5 0 3 5 RDF30J-3 75 C Cu 4-7.5 5 0 3 5 RDF30J-4 * DC ratings use two poles in series. PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable Disconnect switches All switches Y Y - On switch DIR-07 Select for standard applications Handle 4 3 External front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable H-05B, 3R, Red/yellow H-05R N H4X-05B Y Y Red/yellow H4X-05R, 3R, 4, 4X, H4X-05TB Y Red/yellow H4X-05TR Or Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-05BHD N Y Y Red/yellow H4X-05RHD External right side operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-05SB N Y N/A Red/yellow H4X-05SR + Shafts for pistol handles Length in (mm) Mounting depth (X) in (mm) 7.9 (00) 5.30~9.06 (35~30) SH5-00.6 (30) 5.30~3.78 (35~350) SH5-30 5.7 (400) 5.30~6.93 (35~430) SH5-400 Flange handle () - requires shaft operated mechanism or cable operated mechanism + cable NEMA type Flange style Test function Padlockable Defeatable, 3R, 4, Standard FLH N Y Y, 3R, 4, 4X, Chrome plated FLH Shaft operated flange mechanism () - includes shaft For enclosure depth - in (mm) 6~4 (5~63) FLRM Cable operated flange mechanism and cable - must select mechanism (3) and cable (4) Item / length in (mm) Cable mechanism FLCM 36 (900) cable FLC36 60 (500) cable FLC60 0 (3000) cable FLC0 NFPA through the door handle kit - to be used with front pistol handle Color Test function Padlockable Defeatable Red N Y N H79- Accessories Aux. contacts AND... Auxiliary contacts Contact No. of contacts Continuous amp rating Voltage (Vac) Max. aux contacts per switch type NO NC 0 600 4 BAC05 BAC06 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -3
Disconnect switches Dimensions in (mm).4 36 5.87 49.3.46 37..4 36 4.84 3 5.35 36 4.0 0..68 68.07 Direct mount handle.57 40.79 45.5 5.3 35 DIR-07 Flange handle 3.50 (88.9).6 (54.9) 0.86 (.8).06 (6.9) Ø0.50 (Ø.7) Ø0.8 (Ø7.).55 (39.4) 6. (58.0) 5.66 (43.8).00 (5.4).00 (5.4) 0.88 (.3) 4.68 (8.9) 7.0 (80.3) FLH_.3 (58.9).70 (68.6) External front and right side pistol handle Handle type Direction of front operation Direction of right side operation Door drilling layout Ø3.07 Ø78 90 I 90 I 4 Ø 0.7 4 Ø 7 Ø.46 Ø 37 0.78 0.75 70 0 0 H4X-05 H-05.73 44 65 TEST 0.55 4 0.55 4 0.78 0-4 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Compact 60 amp Class J For a complete assembly, select: Max horsepower rating Fuse SCCR -phase 3-phase DC* Conductor Amps class Poles (ka) 0/40 0/40 440/480 600 5 50 AWG size / type 60 J 0 - - - 5 0 RDF60J--COMP 4-0 Sol/4-6 Str 3 00-5 30 50 5 0 RDF60J-3-COMP 75 C Cu 4-5 30 50 5 0 RDF60J-4-COMP * DC ratings use two poles in series. PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable All switches Y Y - on switch DIR-07 Disconnect switches Select for standard applications Handle 4 3 External front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, H-05B, 3R, Red/yellow H-05R N, 3R, 4, 4X, H4X-05B Y Y, 3R, 4, 4X, Red/yellow H4X-05R, 3R, 4, 4X, H4X-05TB Y, 3R, 4, 4X, Red/yellow H4X-05TR Or Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-05BHD N Y Y, 3R, 4, 4X, Red/yellow H4X-05RHD External right side operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-05SB N Y N/A, 3R, 4, 4X, Red/yellow H4X-05SR + Shafts for pistol handles Length in (mm) Mounting depth (X) - in (mm) 7.9 (00) 5.30~9.06 (35~30) SH5-00.6 (30) 5.30~3.78 (35~350) SH5-30 5.7 (400) 5.30~6.93 (35~430) SH5-400 Flange handle () - requires shaft operated mechanism or cable operated mechanism + cable NEMA type Flange style Test function Padlockable Defeatable, 3R, 4, Standard FLH N Y Y, 3R, 4, 4X, Chrome plated FLH Shaft operated flange mechanism () - includes shaft For enclosure depth - in (mm) 6~4 (5~63) FLRM Cable operated flange mechanism and cable - must select mechanism (3) and cable (4) Item / length in (mm) Cable mechanism FLCM 36 (900) cable FLC36 60 (500) cable FLC60 0 (3000) cable FLC0 NFPA through the door handle kit - to be used with selector handle or front pistol handle Color Test function Padlockable Defeatable Red N Y N H79- Accessories Aux. contacts Auxiliary contacts Contact type No. of contacts NO NC Continuous amp rating AND... 0 600 4 Voltage (Vac) Max. aux contacts per switch BAC05 BAC06 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -5
Disconnect switches Dimensions in (mm) 3.89 99. 8.5 4.3 05.47 37.5 0.59 5 3.3 84 4.56 6 5.5 Direct mount handle.57 40.79 45.5 5.3 35 DIR-07 Flange handle 3.50 (88.9).6 (54.9) 0.86 (.8).06 (6.9) Ø0.50 (Ø.7) Ø0.8 (Ø7.).55 (39.4) 6. (58.0) 5.66 (43.8).00 (5.4).00 (5.4) 0.88 (.3) 4.68 (8.9) FLH_ 7.0 (80.3).3 (58.9).70 (68.6) External front and right side pistol handle Handle type Direction of front operation Direction of right side operation Door drilling layout I I Ø.46 Ø3.07 4 Ø 0.7 Ø 37 Ø78 4 Ø 7 90 90 0.78 0.75 70 0 0 H4X-05 H-05.73 44 65 TEST 0.55 4 0.55 4 0.78 0-6 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Standard 60 amp Class J For a complete assembly, select: Max horsepower rating Fuse SCCR -phase 3-phase DC* Conductor AWG Amps class Poles (ka) 0/40 0/40 440/480 600 5 50 size/type 60 J 00 0 - - - 5 0 RDF60J- -0 Sol/- Str 3 00-5 30 50 5 0 RDF60J-3 75 C Cu 4 00-5 30 50 5 0 RDF60J-4 * DC ratings use two poles in series. PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable All switches Y Y DIR-07 Disconnect switches Select for standard applications Handle 4 3 Or External front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, H-03B, 3R, Red/yellow H-03R N, 3R, 4, 4X, H4X-06B Y Y, 3R, 4, 4X, Red/yellow H4X-06R, 3R, 4, 4X, H4X-06TB Y, 3R, 4, 4X, Red/yellow H4X-06TR Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-06BHD N Y Y, 3R, 4, 4X, Red/yellow H4X-06RHD External right side operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-06SB N Y N/A, 3R, 4, 4X, Red/yellow H4X-06SR + Shafts for pistol handles Length in (mm) Mounting depth (X) in (mm) 7.9 (00) 5.30~9.06 (35~30) SH5-00.6 (30) 5.30~3.78 (35~350) SH5-30 5.7 (400) 5.30~6.93 (35~430) SH5-400 Flange handle () - requires shaft operated mechanism or cable operated mechanism + cable NEMA type Flange style Test Function Padlockable Defeatable, 3R, 4, Standard FLH N Y Y, 3R, 4, 4X, Chrome plated FLH Shaft operated flange mechanism () - includes shaft For enclosure depth in (mm) 6~4 (5~63) FLRM Cable operated flange mechanism and cable - must select mechanism (3) and cable (4) Item / length in (mm) Cable mechanism FLCM 36 (900) cable FLC36 60 (500) cable FLC60 0 (3000) cable FLC0 NFPA through the door handle kit - to be used with front pistol handle Color Test function Padlockable Defeatable Red N Y N H79- Accessories Aux. contacts Auxiliary contacts Contact type NO NC No. of contacts Continuous amp rating AND... Voltage (Vac) 0 600 4 Max number of aux contacts per switch BAC05 BAC06 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -7
Disconnect switches Dimensions in (mm) 5.87 49.3.4 36.46 37..4 36 4.8. 7.3 86 6.77 7 5.3 33 3.66 9.96 Direct mount handle.57 40.79 45.5 5.3 35 DIR-07 Flange handle 3.50 (88.9).6 (54.9) 0.86 (.8).06 (6.9) Ø0.50 (Ø.7) Ø0.8 (Ø7.).55 (39.4) 6. (58.0) 5.66 (43.8).00 (5.4).00 (5.4) 0.88 (.3) 4.68 (8.9) FLH_ 7.0 (80.3).3 (58.9).70 (68.6) External front and right side pistol handle Handle type Direction of front operation Direction of right side operation Door drilling layout Ø3.07 Ø78 90 I 90 I 4 Ø 0.7 4 Ø 7 Ø.46 Ø 37 0.78 0 4.9 5 0 0 H4X-06 H-03.77 45 65 TEST 0.55 4 0.55 4 0.78 0-8 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Standard 00 amp Class J For a complete assembly, select: Max horsepower rating Fuse SCCR -phase 3-phase DC* Conductor Amps class Poles (ka) 0/40 0/40 440/480 600 5 50 AWG size/type 00 J 0 - - - 7.5 0 RDF00J- -0 Sol/- Str 3 00-30 60 75 7.5 0 RDF00J-3 75 C Cu 4-30 60 75 7.5 0 RDF00J-4 * DC ratings use two poles in series. PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable Disconnect switches All switches Y Y DIR-07 Select for standard applications Handles 4 3 External front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable H-03B, 3R, Red/yellow H-03R N H4X-06B Y Y Red/yellow H4X-06R, 3R, 4, 4X, H4X-06TB Y Red/yellow H4X-06TR Or Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-06BHD N Y Y, 3R, 4, 4X, Red/yellow H4X-06RHD External right side operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-06SB N Y N/A Red/yellow H4X-06SR + Shafts for pistol handles Length in (mm) Mounting depth (X) - in (mm) 7.9 (00) 5.30~9.06 (35~30) SH5-00.6 (30) 5.30~3.78 (35~350) SH5-30 5.7 (400) 5.30~6.93 (35~430) SH5-400 Flange handle () - requires shaft operated mechanism or cable operated mechanism + cable NEMA type Flange style Test function Padlockable Defeatable, 3R, 4, Standard FLH N Y Y, 3R, 4, 4X, Chrome plated FLH Shaft operated flange mechanism () - includes shaft For enclosure depth in (mm) 6~4 (5~63) FLRM Cable operated flange mechanism and cable - must select mechanism (3) and cable (4) Item / length in (mm) Cable mechanism FLCM 36 (900) cable FLC36 60 (500) cable FLC60 0 (3000) cable FLC0 NFPA through the door handle kit - to be used with front pistol handle Color Test function Padlockable Defeatable Red N Y N H79- Accessories Aux. contacts Auxiliary contacts Contact type NO NC No. of contacts Continuous amp rating AND... Voltage (Vac) 0 600 4 Max number of aux contacts per switch BAC05 BAC06 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -9
Disconnect switches Dimensions in (mm) 5.87 49.3.4 36.46 37..4 36 4.8. Direct mount handle.57 40.79 45.5 5.3 35 7.3 86 6.77 7 5.3 33 3.66 9.96 DIR-07 Flange handle 3.50 (88.9).6 (54.9) 0.86 (.8).06 (6.9) Ø0.50 (Ø.7) Ø0.8 (Ø7.).55 (39.4) 6. (58.0) 5.66 (43.8).00 (5.4).00 (5.4) 0.88 (.3) 4.68 (8.9) FLH_ 7.0 (80.3).3 (58.9).70 (68.6) External front and right side pistol handle Handle type Direction of front operation Direction of right side operation Door drilling layout Ø3.07 Ø78 90 I 90 I 4 Ø 0.7 4 Ø 7 Ø.46 Ø 37 0.78 0 4.9 5 0 0 H4X-06 H-03.77 45 65 TEST 0.55 4 0.55 4 0.78 0-0 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Standard 00 and 400 amp Class J For a complete assembly, select: + lugs Amps 00 400 Fuse class J Max horsepower rating SCCR -phase 3-phase DC* Poles (ka) 0/40 0/40 440/480 600 5 50 0 - - - - - RDF00J- 3-60 5 50 - - RDF00J-3 4-60 5 50 - - RDF00J-4 00 0 - - - 0 50 RDF400J- 3-5 50 350 0 50 RDF400J-3 4-5 50 350 0 50 RDF400J-4 * DC ratings use two poles in series. + Terminal lug kit amps Poles Lugs per kit AWG wire / type 00 LUG- 6-300 kcmil 3 3 LUG-3 75 C Cu/Al 4 4 LUG-4 400 LUG- 4-600 kcmil or dual /0-50 kcmil 3 3 LUG-3 75 C Cu/Al 4 4 LUG-4 PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable Disconnect switches All switches Y Y DIR-07 Select for standard applications Handles 4 3 External front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable H-03B, 3R, Red/yellow H-03R N H4X-06B Y Y Red/yellow H4X-06R, 3R, 4, 4X, H4X-06TB Y Red/yellow H4X-06TR Or Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-06BHD N Y Y Red/yellow H4X-06RHD External right side operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-06SB N Y N/A Red/yellow H4X-06SR + Shafts for pistol handles Length in (mm) Mounting depth (X) in (mm) 7.9 (00) 00 A: 5.70-9.06 (45-30) 400 A: 7.87-0.4 (00-60) SH5-00 00 A: 5.70-3.78 (45-350).6 (30) 400 A: 7.87-6.93 (00-380) SH5-30 5.7 (400) 00 A: 5.70-6.93 (45-430) 400 A: 7.87-8.0 (00-460) SH5-400 Flange handle () 00 A only - requires shaft operated mechanism or cable operated mechanism + cable NEMA type Flange style Test function Padlockable Defeatable, 3R, 4, Standard FLH N Y Y, 3R, 4, 4X, Chrome plated FLH Shaft operated flange mechanism () 00 A only - includes shaft For enclosure depth in (mm) 6~4 (5~63) FLRM Cable operated flange mechanism and cable 00 A only - must select Mechanism (3) and Cable (4) Item in (mm) Cable mechanism FLCM 36 (900) cable FLC36 60 (500) cable FLC60 0 (3000) cable FLC0 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -
Disconnect switches Accessories Aux. contacts Shrouds NFPA through the door handle kit - to be used with front pistol handle Use with switch Color Test function Padlockable Defeatable RDF00J-_ H79- RDF400J-_ Red N Y N H79-3 Auxiliary contacts Contact type 00 No. of contacts Continuous amp rating AND... Voltage (Vac) Max number of aux contacts per switch catalog number RDF00J- : 4 NO BAC05 0 600 NC RDF400J- : 8 BAC06 AND... Terminal shrouds - includes terminal shroud for lineside or loadside amps Poles TSH8-TB 3 TSH8-3TB 4 TSH8-4TB TSH9-TB 3 TSH9-3TB 400 4 TSH9-4TB Dimensions in (mm) RDF00J-3 RDF400J-3 7.7 96. 6.6 68 6.8 57 7.08 80 4.37. 0.9 (3P) -.79 (4P) 59 (3P) - 35 (4P) 3.98 0.5 5.8 34. 6.50 65. 7.67 95.46 9.3 7.97 0.5 5.35 390 9.44 40 3.98 0.5.95 75 0.98 4.9.4 36.95 75 3.6 83 5. 30.96 50.59 66.59 66 - BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Dimensions in (mm) DIR-07 direct mount handle FLH_ flange handle.57 40.79 45.5 3.50 (88.9).6 (54.9) 0.86 (.8).06 (6.9) Ø0.50 (Ø.7) Ø0.8 (Ø7.).55 (39.4) 5.3 35 6. (58.0) 5.66 (43.8).00 (5.4).00 (5.4) 0.88 (.3) 4.68 (8.9) Disconnect switches 7.0 (80.3).3 (58.9).70 (68.6) External front and right side pistol handle Handle type Direction of front operation Direction of right side operation Door drilling layout Ø3.07 Ø78 90 I 90 I 4 Ø 0.7 4 Ø 7 Ø.46 Ø 37 0.78 0 4.9 5 0 0 H4X-06 H-03.77 45 65 TEST 0.55 4 0.55 4 0.78 0 Terminal lugs 00 A (LUG- ) 400 A ()LUG- 5.5 38.8 0.45 Ø.6 0.46.68.3 35.8 7.5 Ø 0.4 Ø 4.7 0.63 5.88. 8.6 0.5 6.35.8 46 0.44.3 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -3
Disconnect switches Standard 600 amp Class J and 800 amp Class L For a complete assembly, select: Select for standard application + lugs Fuse Max horsepower rating, 3-phase Amps class Poles SCCR ()ka) 0/40 440/480 600 - - - RDF600J- 600 J 3 00 400 500 RDF600J-3 4 00 400 500 RDF600J-4 00 - - - RDF800L- 800 L 3 00 500 500 RDF800L-3 4 00 500 500 RDF800L-4 + Terminal lug kit amps Poles Lugs per kit Conductor AWG size / type Or 600-800 LUG5- () -600 kcmil 3 3 LUG5-3 75 C Cu/ Al 4 4 LUG5-4 PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable Defeatable All switches Y Y N DIR-08 External front operated pistol handles - shaft required Test NEMA type Color Padlockable Defeatable function H4X-07B, 3R, 4, 4X, N Y Y Red/yellow H4X-07R Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA Test function Color Padlockable Defeatable type Handles, 3R, 4, 4X, Red/yellow N Y Y H4X-07BHD H4X-07RHD Accessories Aux. contacts Shrouds Shafts for pistol handles + Length in (mm) Mounting depth (X) in (mm) 7.9 (00) 0.63~.97 (70~304) SH7-00.6 (30) 0.63~6.69 (70~44) SH7-30 5.7 (400) 0.63~9.84 (70~504) SH7-400 NFPA through the door handle kit - to be used with front pistol handle Test function For switch cat. no. Color Padlockable Defeatable All switches Red N Y N H79-4 Auxiliary contacts Contact type NO NC No. of contacts Continuous amp rating Voltage (Vac) AND... 0 600 8 Max number of aux contacts per switch BAC05 BAC06 AND... Terminal shrouds - includes terminal shroud for lineside or loadside amps Poles 600-800 TSH0-TB 3 TSH0-3TB 4 TSH0-4TB -4 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Dimensions in (mm) RDF600J-3 and RDF800L-3 min 0.43 min 65 9.84 50 6.0 55.8 (3P) - 4.88 (4P) 84 (3P) - 378 (4P).56.34 65 34 3. 79.5 3.36 85.5 0.43 0.7 7 3.54 90 0.7 7.8 300 0.3 60 fix 9.84 fix 50 5 6.5 8.54 47 Disconnect switches 8.58 47 4.96 380 Fuse Cover Fully Open 0.7 7.3 59.8 300 3.36 85.5 Ø 0.5 Ø3 5 3.7 3.7 94 94 4.33 (3P) - 8.03 (4P) 364 (3P) - 458 (4P) 0.35 9 Dir-08 drect mount handle.36 60 7.48 90 3.35 85 External front pistol handle Handle type Direction of front operation Door drilling layout Ø3.07 Ø78 90 I 4 Ø 0.7 4 Ø 7 Ø.46 Ø 37 0.78 0 0 0 0.78 0 H4X-07 6 0.55 4 0.55 4 Terminal lugs 600 to 800 A (LUG5- ) 3.76 95.5.49 38 3.5 80 0.40 Ø0..87 73 0.64 6. BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -5
Disconnect switches UL 98 non-fused rotary disconnect switches 30 to 00 amps Bussmann series UL 98 non-fused rotary disconnect switches are versatile switches that break and make power circuits ON and OFF load. Agency information UL 98, Guide WHTY, File E5530 CSA. No. 4, File 5700 Conforms with IEC 60947-3 Features Make and break power under load Up to 00 ka SCCR Panel mount (30-00 A compact DIN-Rail or panel mount) Disconnect switches are front, right side and direct handle operable (30-00 A) Finger-safe (30-00 A compact only) Fully visualized breaking (00-00 A) Online resources Visit Eaton.com/bussmannseries for: CAD drawings Instruction sheets UL information Related Bussmann series products Fuse blocks Modular Class H(K), J and RK fuse blocks up to 600 A Modular Class H(K), J and RK power distribution fuse blocks up to 400 A Modular, finger-safe CH Class CC and J, and UL supplemental and IEC 0x38mm DIN-Rail holders up to 60 A Finger-safe Optima Class CC, UL supplemental and IEC 0x38mm DIN- Rail/panel mount holders up to 30 A Finger-safe Optima Class CC, UL supplemental and IEC 0x38mm DIN-Rail/panel mount protection modules up to 30 A IEC specifications RD30-3 RD00-3 RD600-3 3-pole RD30-3 RD60-3 RD00-3 RD00-3-SCCR RD00-3 RD400-3 RD600-3 RD800-3 RD000-3 RD00-3 4-pole RD00-4 RD400-4 RD600-4 RD800-4 RD000-4 RD00-4 Thermal current I th @ 40 C (A) 30 60 00 00 00 400 Rated insulation voltage U i (V) 800 800 800 000 000 000 000 000 000 000 Rated impulse withstand voltage U imp (kv) 8 8 8 8 8 8 Rated operation currents I e (A) Rated voltage (Vac) Load duty category A A A A A A A A A A AC- A 00 400 00 630 800 000 AC-3 A 400 000 3 63 00 00 AC- A 80 500 630 630 630 690 AC-3 A 63 35 00 400 400 400 Operational power (Vac) in AC-3 (kw) 400 V w/o prebreak AC, 5 00 0 355 450 5 500 V w/o prebreak AC, 30 45 63 40 80 450 560 560 560 690 V w/o prebreak AC, 8.5 90 85 85 85 400 400 400 Overload capacity (U e 45 Vac) Rated short-circuit making capacity Icm (ka peak) 3 7.6 3 48 48 75 48 75 Fuse protected short-circuit withstand (ka RMS prospective) Short-circuit current (ka) 3 50 50 5 00 00 00 00 00 00 00 Associated fuse rating (A) 3 3 63 00 00 400 630 800 000 50 Connection Minimum Cu cable cross section (mm ).5.5 0 35 70 85 x50 x85 x40 Minimum Cu busbar section (mm ) x30x5 x40x5 x50x5 x60x5 Maximum Cu cable section (mm ) 70 70 70 300 300 600 A/B: Category with index A = frequent operation; category with index B = infrequent operation. The power value is given for information only; the current values vary from one manufacturer to another. 3 For a rated operating voltage, Ue = 400 Vac. -6 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches UL specifications RD30-3 RD00-3 RD600-3 3-pole RD30-3 RD60-3 RD00-3 RD00-3- SCCR RD00-3 RD400-3 RD600-3 RD800-3 RD000-3 RD00-3 4-pole RD00-4 RD400-4 RD600-4 RD800-4 RD000-4 RD00-4 UL standard UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 Max ampacity 30 A 60 A 00 A 00 A 00 A 400 A 600 A 800 A 000 A 00 A type Compact Compact Compact Standard Standard Standard Standard Standard Standard Standard Handle operation Front/Side Front/Side Front/Side Front Front Front Front Front Front Front UL electrical ratings Max voltage (AC) 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac Max voltage (DC) 50 Vdc 50 Vdc 50 Vdc Max. AC Hp ratings DC Hp ratings -phase, 0 3 5 -phase, 40 5 0 0 0 0 3-phase, 40 0 0 0 30 75 5 00 00 00 00 3-phase, 480 0 40 50 75 50 50 400 500 500 500 3-phase, 600 5 50 50 00 00 350 350 500 500 500 5 0 50 50 Electrical characteristics SCCR with fuse (ka) 00 00 5 /00* 00 00 00 00 00 00 00 Fuse class J J J J J J J L L L Max. fuse rating (A) 30 60 00 0A 00 400 600 800 000 00 Terminal lugs/kits Integral Integral Integral Lug mounting torque - lb-in (N m) 60 (8) 60 (8) LUG-_ 30 (35) LUG3-_ 398 (45) Wire type 75 C Cu 75 C Cu 75 C Cu 75 C Cu/ Al 75 C Cu/ Al 75 C Cu/ Al 75 C Cu/ Al Wire range and torque - lb-in (N m) Solid -0, 35.4 (4) 0-, 35.4 (4) -0, 35.4 (4) 0-, 35.4 (4) -0, 35.4 (4) 0-, 35.4 (4) 30 (35) 30 (35) 30 (35) 30 (35) 75 C Cu/ Al 75 C Cu/ Al 75 C Cu/ Al 6-300 kcmil, 75 (3) 6-300 kcmil, 75 (3) LUG-_ 4-600 kcmil, 550 (6) () -600 kcmil, 375 (4.4) (4) -600 kcmil, 375 (4.4) (4) -600 kcmil, 375 (4.4) /0, 39.8 /0, 39.8 /0, 39.8 Dual /0-50 Stranded (4.5) (4.5) (4.5) kcmil, 550 (6) /0, 44.3 (5) /0, 44.3 (5) /0, 44.3 LUG3-_: () 6-, (5) 00 (.6) () -350 kcmil, 375 (4.4) Mechanical characteristics Endurances/Cycles 0,000 0,000 0,000 0,000 8000 6000 6000 3500 3500 3500 Physical characteristics (4) -600 kcmil, 375 (4.4) Dimensions See drawings on product pages Weight - lbs 3-pole.3 (0.6).3 (0.6).3 (0.6) 4. (.9) 4. (.9) 0.0 (4.6) 8. (8.) 9.6 (8.9) 9.6 (8.9) 9.6 (8.9) (kg) 4-pole 5.0 (.3).3 (5.6) 3.9 (0.9) 5.3 (.5) 5.3 (.5) 5.3 (.5) Environmental Operating Temperature -0 to 70 C -0 to 70 C -0 to 70 C -0 to 70 C -0 to 70 C -0 to 70 C -0 to 70 C -0 to 70 C -0 to 70 C -0 to 70 C Flammability Rating UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 Accessories Lug kit cat. no. 3-pole Integral Integral Integral 4-pole NEMA, 3R, NEMA, 3R, 4, 4X, Handles Direct Front Pistol Front or Side Selector Shaft c/s - mm 5x5 5x5 5x5 0x0 0x0 0x0 x x x x Shaft guide Shrouds Additional pole accessory Auxiliary NO + NC contacts () NO Available, see product page for details and catalog numbers. Not available. * 5 ka @ 600 Vac, 00 ka @ 480 Vac. Disconnect switches BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -7
Disconnect switches UL 98 non-fused rotary disconnect switches 30, 60 and compact 00 A For a complete assembly, select: Select for standard application Accessories Handles Aux. contacts Shrouds Sw. 4 th pole Auxiliary contact configurations Max horsepower rating -phase 3-phase Conductor Amps Poles SCCR (ka) 0 0/40 0/40 440/480 600 AWG size/type 30 5 0 0 5 RD30-3 00 0-/0 Str/-0 Sol 60 3 3 0 0 40 50 RD60-3 75 C Cu 00 5/00* 5 0 0 50 50 RD00-3 * 00 ka @480 Vac, 5 ka @ 600 Vac. PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable All switches N Y - On DIR-0 External front or right side operated selector handles - shaft required Handle NEMA type Color Test function Padlockable length Short H4X-0B (), 3R, 4, 4X, Red/yellow Short H4X-0R () N Y Long H4X-0B () Red/yellow Long H4X-0R () Or External front operated pistol handles - shaft required NEMA type Color Handle length Test function Padlockable Defeatable, 3R, 4, 4X, Y H4X-03B N Y Red/yellow Y H4X-03R Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Handle length Test function Padlockable Defeatable, 3R, 4, 4X, H4X-03BHD N Y Y Red/yellow H4X-03RHD + Shafts for selector handles Length in (mm) Mounting depth (X) in (mm) 5.9 (50) 3.50~7.60 (89~93) SH4-50 () 7.9 (00) 3.50~9.50 (89~4) SH4-00 ().6 (30) 3.50~4.9 (89~378) SH4-30 () Shafts for pistol handles Length in (mm) Mounting depth (X) - in (mm) 7.9 (00) 3.30~7.40 (84~88) SH3-00 ().6 (30) 3.30~9.30 (84~36) SH3-30 () 5.7 (400) 3.30~4.7 (84~373) SH3-400 () + Shaft guide for selector handles Required for.6" (30mm) long shafts, optional for other lengths SH-GUIDE Shaft guide for pistol handles Required for 5.7î (400mm) long shafts, optional for other lengths SH-GUIDE AND... Auxiliary contacts Contact type No. of contacts Continuous amp Max number of units per Voltage (Vac) rating switch ( per side/4 contacts NO + NC of each 40 BAC0 total) 0 ( per side/4 contacts NO BAC0 total) AND... Terminal shrouds - includes terminal shroud for both lineside and loadside amps Poles Location on switch All switches 3 TSH3-3TB (for switched 4th pole) TSH3-TB Lineside and loadside AND... ed 4th Pole - converts 3-pole switch to 4-pole amps 30 POLE98-30 60 POLE98-60 00 POLE98-00 Possible 4th pole configurations -8 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Dimensions - in (mm) Direct handle operation External front operation External right side operation Disconnect switches.95 75.5 64 3.07 78.0 6.4 3.94 min./4.65 max. 36 00 min./37 max. 3.9 8.5 64.99 50.6 3.07 78.0 6 0.5 3.8 min./7.9 max..4 30 min./0 max. 36 4.9 4.6.79 7 5.7 3.4 7.44 89 4.90 4.6 5.7 3.4 7.44 89.79 7 Disconnect switches.09 53 0.4 6 0.35 8.8.0 6.0 6.0 6 0.35 8.8 M5.08 53 0.6 6 0.34.0.0.0 0.34 8.8 6 6 6 8.8 M5. Position for switched 4 th pole ( per device max.) or auxiliary contact.. Position for auxiliary contact only. Note: Maximum of 4 Auxiliary contacts, or 3 Auxiliary contacts + one switched 4th pole. External front/right side operated selector handle, front operated pistol handle Handle type Door drilling layouts Ø3.07 Ø78.57 40 Selector H4X-0_ Ø3.07 Ø78.4 36.79 7 3.46 88 0 Direction of front operation I 90 0 Direction of right side operation I 90 4 Ø 0.7 4 Ø 7.0 8 0.53 3.5 Ø. Ø 3 Ø 0.88 With 4 Mounting Screws Ø.5 0. 3 With mounting nut Selector H4X-0_.45 37.57 40 4 Ø 0.7 4 Ø 7 Pistol H4X-03_ Ø.45in/37mm screw clip (from front) Ø.in/3mm screw (from rear).0 8 H4X-03_ with 4 mounting screws BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -9
Disconnect switches UL 98 non-fused rotary disconnect switches 00, 00 and compact 400 A For a complete assembly, select: Select for standard application Handle Max horsepower rating -phase 3-phase Amps Poles SCCR (ka) 0/40 0/40 440/480 600 00 0 30 75 00 RD00-3-SCCR 3 0 75 50 00 RD00-3 00 4 00 0 75 50 00 RD00-4 400 3-5 50 350 RD400-3 4-5 50 350 RD400-4 + Terminal lug kit amps Poles Lugs per kit Conductor AWG size/type 00-00 LUG- 6-300 kcmil 3 3 LUG-3 75 C Cu/ Al 4 4 LUG-4 400 LUG- 4-600 kcmil or Dual /0-50 kcmil 3 3 LUG-3 75 C Cu/ Al 4 4 LUG-4 LUG3- () 6-350 kcmil 3 3 LUG3-3 75 C Cu/ Al 4 4 LUG3-4 PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable All switches N Y DIR-03 External front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable H-03B, 3R, Red/yellow H-03R N Y Y H4X-06B Or, 3R, 4, 4X, Red/yellow H4X-06R Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable, 3R, 4, 4X, H4X-06BHD N Y Y Red/yellow H4X-06RHD + Shafts for pistol handles Length in (mm) Mounting depth (X) - in (mm) 7.9 (00) 5.3~0.43 (35~65) SH5-00.6 (30) 5.3~5.6 (35~385) SH5-30 5.7 (400) 5.3~8.3 (35~465) SH5-400 + Shaft Guide Required for 5.7î (400mm) long shafts, optional for other lengths SH-GUIDE Accessories Aux. contacts Shrouds AND... Auxiliary contacts Contact No. of Continuous amp rating Voltage type contacts Vac NO + NC 0. 5-50 NO + NC of each NO + NC 5 NO + NC Max number of aux contacts per switch BAC03* BAC04* BAC* BAC* * For one auxiliary contact, install either BAC03 or BAC. For two auxiliary contacts, install BAC03 + BAC04, or BAC + BAC. AND... Terminal shrouds - includes terminal shroud for Lineside or loadside Poles Location on switch amps Lineside TSH4-3T 3 00-00 Loadside TSH4-3B 4 Lineside or loadside TSH4-4TB Lineside TSH5-3T 3 400 Loadside TSH5-3B 4 Lineside or loadside TSH5-4TB -30 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Dimensions in (mm) M J U Z Y W R H N AA AC V K CA Disconnect switches R T F AD C amps Overall dim. C 00 3.7 (95) 00 3.7 (95) 400 4.9 (8) Terminal shrouds body mounting Connection AC AD F 3p. F 4p. H J 3p. J 4p. K M 3p. M 4p. N R R T U V W Y Z A A AC 0. 7.09 9.06 4..7 4.3.8 6.3 8.7 5.3 0.35 0.7.97 0.98.8 0.43 0.4.35 6.3 0.6 3.05 (78) (56) (80) (30) (07) (55) (05) (46) (60) (0) (35) (9) (7) (50) (5) (30) () (4) (34) (60) (5) 0. 7.09 9.06 4..7 4.3.8 6.3 8.7 5.3 0.35 0.7.97 0.98.8 0.43 0.4.35 6.3 0.6 3.05 (78) (56) (80) (30) (07) (55) (05) (46) (60) (0) (35) (9) (7) (50) (5) (30) () (4) (34) (60) (5) 6 9.05.4 6.53.95 5.3.65 8.6 0.6 7.67 0.35 0.7.56.77.97 0.43 0..08 0. 0.8 4.5 (5) (406) (30) (90) (66) (75) (35) (68) (0) (70) (95) (9) (7) (65) (45) (50) (3) (5) (53) (60) (0) DIR-03 direct mount handle External front handle.57 40.79 45.5 Handle type Direction of front operation Door drilling layout Ø3.07 Ø78 90 I 4 Ø 0.7 4 Ø 7 Ø.46 Ø 37 0.78 0 5.3 35 4.9 5 0 H4X-06 H-03.77 45 65 TEST 0.55 4 0.55 4 0.78 0 Terminal lugs 5.5 38.8 0.45 Ø.6 0.46.68.3 35.8 7.5 Ø 0.4 Ø 4.7 0.63 5.88.94 49.30 0.88.3 73.5 58.67 0.53 3.46.9 30.3. 8.6 0.5 6.35.8 46 LUG-_ 00 to 00 A LUG-_ 400 A LUG3-_ 400 A 0.44.3.5 3.75 0.5 6.35 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -3
Disconnect switches UL 98 non-fused rotary disconnect switches 600, 800, 000 and 00 A For a complete assembly, select: Select for standard application Handles 3 Max horsepower rating SCCR 3-phase DC* Amps Poles (ka) 0/40 440/480 600 5 50 600 3 40 400 350 0 50 RD600-3 00 4 40 400 350 0 50 RD600-4 800 3 00 500 500 - - RD800-3 4 00 500 500 - - RD800-4 000 3 00 500 500 - - RD000-3 00 4 00 500 500 - - RD000-4 00 3 00 500 500 - - RD00-3 4 00 500 500 - - RD00-4 * DC ratings use two poles in series. + Terminal lug kit amps Poles Lugs per kit Lugs required per pole Conductor AWG size/type 600 3 3 () -600 kcmil LUG5-3 4 4 75 C Cu/ Al LUG5-4 800-00 3 6 (4) -600 kcmil LUG6-6 4 8 75 C Cu/ Al LUG6-8 PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable All switches N Y DIR-04 External front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable H4X-07B (), 3R, 4, 4X, Red/yellow H4X-07R () N Y Y H4X-08B () Red/yellow H4X-08R () Or 4 Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Test function Padlockable Defeatable H4X-07BHD (3), 3R, 4, 4X, Red/yellow H4X-07RHD (3) N Y Y H4X-08BHD (4) Red/yellow H4X-08RHD (4) + Shafts for pistol handles Length in (mm) Mounting depth (X) in (mm) 7.9 (00) 8.70~3.50 (~343) SH6-00.6 (30) 8.70~8.3 (~463) SH6-30 5.7 (400) 8.70~.38 (~543) SH6-400 + Shaft guide Required for 5.7" (400mm) long shafts, optional for other lengths SH-GUIDE Accessories Aux. contacts Shrouds AND... Auxiliary contacts Max number of aux contacts Contact type No. of contacts Continuous amp rating Voltage (Vac) per switch NO + NC of each BAC03* 0. 5-50 NO + NC of each BAC04* NO + NC of each BAC* 5 NO + NC of each BAC* * For one auxiliary contact, install either BAC03 or BAC. For two auxiliary contacts, install BAC03 + BAC04, or BAC + BAC. AND... Terminal shrouds* includes terminal shroud for lineside or loadside amps Poles Location on switch 3 TSH6-3TB 600 4 TSH6-4TB Lineside or loadside 3 TSH7-3TB 800-00 4 TSH7-4TB * Shroud for lineside included with switch. -3 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Dimensions in (mm) 600 A 800 to 00 A Disconnect switches amps Terminal shrouds B body mounting Connection F 3p. F 4p. H J 3p. J 4p. M 3p. M 4p. N N N A A Z 600 8. (460) (80) 4.7 (360) 5.5 (40) 5 (8) 6.59 (68) 0.03 (55) 3.9 (335) 6.88 (75).34 (60). (8).6 (30).85 (47) 800 8. (460) 4.64 (37) 9.37 (49) 5.5 (40) 6.83 (74) 9.9 (34) 3.66 (347) 8.38 (467) 6.88 (75).34 (60). (8) 3 (330).85 (47) 000 8. (460) 4.64 (37) 9.37 (49) 5.5 (40) 6.83 (74) 9.9 (34) 3.66 (347) 8.38 (467) 6.88 (75).34 (60). (8) 3 (330).85 (47) 00 8. (460) 4.64 (37) 9.37 (49) 5.5 (40) 6.83 (74) 9.9 (34) 3.66 (347) 8.38 (467) 6.88 (75).34 (60). (8) 3 (330).85 (47) DIR-04 Direct mount handle.36 60 External front pistol handles Handle Type Direction of Front Operation I Ø3.07 Ø78 90 7.48 90 8.7 0 0 Door drilling layout Terminal lugs 3.35 85 H4X-07 Ø3.07 Ø78.4 6 3.78 350 0 90 I 4 Ø 0.7 4 Ø 7 0.55 4 0.55 4 Ø.46 Ø 37 0.78 0 0.78 0 LUG5-, LUG6-600 to 00 A 3.76 95.5 H4X-08.36 60.49 38 3.5 80 0.40 Ø0..87 73 0.64 6. BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -33
Disconnect switches UL 508 non-fused rotary disconnect switches 6 to 80 A Eaton UL 508 load break disconnect switches allow safe control and safe disconnection of any motor application or to isolate a circuit within the panel. These disconnect switches are compact and offer a wide variety of accessories like 4th poles, Auxiliary contacts, door mounting and 6/8-Pole kits. Features Suitable for motor disconnect DIN-Rail or panel mount Door mount option Disconnect switches are front, right side or direct handle operable Finger-safe Agency information UL 508, Guide NLRV, File E559 CSA C. No. 4, File 5700 Conforms with IEC 60947-3 Online resources Visit Eaton.com/bussmannseries for: CAD drawings Instruction sheets UL information Related Bussmann series products Fuse blocks Modular Class H(K), J and RK fuse blocks up to 600 A Modular Class H(K), J and RK power distribution fuse blocks up to 400 A Modular, finger-safe CH Class CC and J, and UL supplemental and IEC 0x38mm DIN-Rail holders up to 60 A Finger-safe Optima Class CC, UL supplemental and IEC 0x38mm DIN- Rail/panel mount holders up to 30 A Finger-safe Optima Class CC, UL supplemental and IEC 0x38mm DIN-Rail/panel mount protection modules up to 30 A IEC specifications RD6-3-508 RD6-3-508 with 6-pole conversion kit RD6-3-508 RD5-3-508 RD40-3-508 RD63-3-508 RD80-3-508 Thermal current I th at 40 C (A) 6 5 40 63 80 Rated insulation voltage U i (V) 800 800 800 800 800 Rated impulse withstand voltage U imp (kv) 8 8 8 8 8 Rated operation currents Ie (A) Load duty category Rated voltage A/B A/B A/B A/B A/B 500 AC- A/ AC- B 6/6 5/5 40/40 63/63 80/80 AC-3A/ AC-3 B 6/6 5/5 5/5 63/63 63/63 AC- A/ AC- B 6/6 5/5 40/40 63/63 80/80 690 AC- A/ AC- B 6/6 5/5 3/40 40/63 63/80 AC-3A/ AC-3 B 6/6 5/5 5/5 40/40 40/40 Operational power in AC-3 (kw) 400 Vac without prebreak AC, 7.5 8.5 30 37 500 Vac without prebreak AC, 7.5 5 30 37 690 Vac without prebreak AC, 7.5 5 8.5 30 37 Overload capacity (U e 45 Vac) Rated short-time withstand current 0.3 s. ICW (ka RMS) 3.5.5.5 3 3 Rated short-time making capacity I cm (ka peak) 3 6 6 6 9 9 Fuse protected short-circuit withstand (ka RMS prospective) Prospective short-circuit current (ka RMS) 3 50 50 50 50 50 Associated fuse rating (A) 3 6 5 40 63 80 Connection Minimum Cu cable cross section (mm ).5.5.5.5.5 Maximum Cu cable section (mm ) 6 6 6 35 35 Tightening torque min/max (N m) /. /. /. 3.5/3.85 3.5/3.85 A/B: Category with index A = frequent operation; category with index B = infrequent operation. The power value is given for information only; the current values vary from one manufacturer to another. 3 For a rated operating voltage, U e = 400 Vac. -34 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches UL specifications RD6-3-508 RD6-3-508 with 6-pole conversion kit RD6-3-508 RD5-3-508 RD40-3-508 RD63-3-508 RD80-3-508 UL standard UL 508 UL 508 UL 508 UL 508 UL 508 Max ampacity 6 A 5 A 40 A 63 A 80 A Handle operation Front/Side Front/Side Front/Side Front/Side Front/Side UL ratings Max voltage (AC) 600 Vac 600 Vac 600 Vac 600 Vac 600 Vac 3-phase, 08 3 7.5 7.5 5 5 Max. Hp ratings 3-phase, 40 5 7.5 7.5 0 0 3-phase, 480 0 5 0 40 40 3-phase, 600 0 0 5 40 40 Electrical characteristics SCCR with fuse (ka) 65 65 0/65 50/65 50/65 Recommended upstream Fuse class J J J J J Max. fuse rating (A) 30 30 60/30 00/60 00/60 Terminals Integral Integral Integral Integral Integral Wire type 75 C Cu 75 C Cu 75 C Cu 75 C Cu 75 C Cu Wire range and torque - lb-in (N m) Solid single 4-0, 6.5 (3) 4-0, 6.5 (3) 4-0, 6.5 (3) 4-0, 3. (3.5) 4-0, 3. (3.5) Solid dual, 6.5 (3), 6.5 (3), 6.5 (3), 3. (3.5), 3. (3.5) Stranded single 4-4, 6.5 (3) 4-4, 6.5 (3) 4-4, 6.5 (3) 4-, 3. (3.5) 4-, 3. (3.5) Stranded dual 4-, 6.5 (3) 4-, 6.5 (3) 4-, 6.5 (3) 0-6, 3. (3.5) 0-6, 3. (3.5) Mechanical characteristics Endurances/cycles 0,000 0,000 0,000 0,000 0,000 Physical characteristics Dimensions See drawings on product pages Weight- lb (kg) 0.5 (0.) 0.5 (0.) 0.5 (0.) 0.7 (0.3) 0.7 (0.3) Environmental Operating temperature -0 to 70 C -0 to 70 C -0 to 70 C -0 to 70 C -0 to 70 C Flammability rating UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 Accessories Direct DIR-0 DIR-0 DIR-0 DIR-0 DIR-0 Short selector/nema, 3R, 4, H4X-0B H4X-0B H4X-0B H4X-0B H4X-0B 4X, H4X-0R H4X-0R H4X-0R H4X-0R H4X-0R Long selector/nema, 3R, 4, H4X-0B H4X-0B H4X-0B H4X-0B H4X-0B Handles 4X, H4X-0R H4X-0R H4X-0R H4X-0R H4X-0R Pistol handle/nema, 3R, 4, H4X-03B H4X-03B H4X-03B H4X-03B H4X-03B 4X, H4X-03R H4X-03R H4X-03R H4X-03R H4X-03R Metallic hasp (HD) pistol handle/ H4X-03BHD H4X-03BHD H4X-03BHD H4X-03BHD H4X-03BHD NEMA, 3R, 4, 4X, H4X-03RHD H4X-03RHD H4X-03RHD H4X-03RHD H4X-03RHD 5.9"/50mm SH4-50 SH4-50 SH4-50 SH4-50 SH4-50 Selector handle shafts - 5x5mm 7.9"/00mm SH4-00 SH4-00 SH4-00 SH4-00 SH4-00.6"/30mm SH4-30 SH4-30 SH4-30 SH4-30 SH4-30 7.9"/00mm SH3-00 SH3-00 SH3-00 SH3-00 SH3-00 Pistol handle shafts - 5x5mm.6"/30mm SH3-30 SH3-30 SH3-30 SH3-30 SH3-30 5.75"/400mm SH3-400 SH3-400 SH3-400 SH3-400 SH3-400 Selector handle shaft guide SH-GUIDE SH-GUIDE SH-GUIDE SH-GUIDE SH-GUIDE Pistol handle shaft guide SH-GUIDE SH-GUIDE SH-GUIDE SH-GUIDE SH-GUIDE Door mount kit DO-508 DO-508 DO-508 DO-508 DO-508 -Pole TSH-TB TSH-TB TSH-TB 3-Pole (loadside and lineside) TSH-3TB TSH-3TB TSH-3TB TSH-3TB TSH-3TB ed 4th pole/switch amps POLE-6 POLE-5 POLE-40 Shrouds/switch amps Ground module (conforms to IEC 60947-3) GND-6-40 GND-6-40 GND-6-40 GND-63-80 GND-63-80 Neutral module (conforms to IEC 60947-3) NTRL-6-40 NTRL-6-40 NTRL-6-40 NTRL-63-80 NTRL-63-80 NO + NC ( ea.) BAC0 BAC0 BAC0 BAC0 BAC0 () NO BAC0 BAC0 BAC0 BAC0 BAC0 Auxiliary contacts AC ratings Volts 40 Vac 40 Vac 40 Vac 40 Vac 40 Vac Amps 0 0 0 0 0 6-/8-pole conversion kit gangs two switches of same rating, 6-80 A switch amps KIT-6POLE KIT-6POLE KIT-6POLE KIT-6POLE KIT-6POLE Not available. Disconnect switches BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -35
Disconnect switches UL 508 non-fused rotary disconnect switches 6, 5, 40, 63 and 80 A For a complete assembly, select: Max. Class Max horsepower rating, 3-Phase SCCR @600V J fuse Conductor AWG size/ Amps Poles (ka) amps 08 0/40 440/480 600 type 6 3 5 0 0 RD6-3-508 65 30 5 7.5 7.5 5 0 4-0 Sol, Dual RD5-3-508 Sol, 4-4 Str, Dual 0 60 40 7.5 7.5 0 5 4- Str, 75 C Cu RD40-3-508 65 30 3 50 00 63 5 0 40 40 4-0 Sol, Dual RD63-3-508 65 60 Sol, 4- Str, Dual 50 00 80 5 0 40 40 0-6 Str, 75 C Cu RD80-3-508 65 60 PLUS Direct mount handle - mounts directly to switch, no shaft required For switch cat. no. Color Test function Padlockable All switches N Y - On DIR-0 Select for standard application Handles External front or right side operated selector handles - shaft required NEMA type Color Handle length Test function Padlockable, 3R, 4, 4X, H4X-0B () Short Red/yellow H4X-0R () N Y H4X-0B () Long Red/yellow H4X-0R () Or External front operated pistol handles - shaft required NEMA type Color Handle length Test function Padlockable Defeatable, 3R, 4, 4X, H4X-03B N Y Y Red/yellow H4X-03R Metallic hasp (heavy duty) external front operated pistol handles - shaft required NEMA type Color Handle length Test function Padlockable Defeatable, 3R, 4, 4X, H4X-03BHD N Y Y Red/yellow H4X-03RHD + Shafts for selector handles Length in (mm) Mounting depth (X) - in (mm) 5.9 (50) 3.50~7.60 (89~93) SH4-50 () 7.9 (00) 3.50~9.50 (89~4) SH4-00 ().6 (30) 3.50~4.9 (89~378) SH4-30 () Shafts for pistol handles Length in (mm) Mounting depth (X) - in (mm) 7.9 (00) 3.30~7.40 (84~88) SH3-00 ().6 (30) 3.30~9.30 (84~36) SH3-30 () 5.7 (400) 3.30~4.7 (84~373) SH3-400 () + Shaft guides for selector and pistol handles Handle type Selector Required for.6" (30mm) long shafts, optional for other lengths SH-GUIDE Pistol Required for 5.7" (400mm) long shafts, optional for other lengths SH-GUIDE + Door mount kit For mounting switch on the right side of the enclosure or directly on the enclosure door using switch side operation shaft location. Kit includes a shaft. Order switch and selector handle separately. All switches - kit includes shaft DO-508 AND... -36 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches Aux.Contacts Auxiliary contacts Contact type NO + NC No. of contacts Ea. Continuous amp rating Voltage (Vac) rating Max number of units per switch BAC0 0 40 ( per side/4 contacts total) NO BAC0 Accessories 6 pole kit Gnd./neut. mods 4 th pole Shrouds Order switches separately AND... Terminal shrouds - includes terminal shroud for both lineside and loadside amps Poles Location on switch 6-40 (for switched 4th pole) TSH-TB 6-40 Lineside and loadside TSH-3TB 3 63-80 TSH-3TB AND... ed 4th pole - converts 3-pole switch to 4-pole switch amps 6 POLE-6 5 POLE-5 40 POLE-40 AND... Ground and Neutral Modules - provides unswitched ground or neutral pole - conforms to IEC 60947-3 amps Module Type 6-40 GND-6-40 Ground 63-80 GND-63-80 6-40 NTRL-6-40 Neutral 63-80 NTRL-63-80 AND... 6-pole conversion kit - creates a 6-pole switch by ganging two 3-pole switches of equal rating amps All switches KIT-6POLE* * Kit ships with a direct handle. If external handle is needed order a selector handle and shaft for the UL 508 Rotary Disconnect es. Note: To create an 8-pole switch from 6 to 40 amp switches, use two 3-pole switches of equal ratings plus two switched 4th poles (part # POLE-_). Disconnect switches Auxiliary contact configurations N or G N or G N or G N or G N or G N or G Ground and neutral module, and switched 4th pole configurations. Dimensions in (mm).95 75.5 64 F M.4 36 E 3.9 8.5 64.99 50.6 F M J D.4 36 G.67 68 N AC G.68 68 N AC ø.79 ø 7 Direct handle operation External front operation External side operation. Position for switched 4 th pole ( per device max.), or ground or neutral module ( per device max.) or auxiliary contact.. Position for auxiliary contact only. Note: Maximum of 4 Auxiliary contacts, or 3 Auxiliary contacts + one ground or neutral module, or one switched 4 th pole. amps.97 50 0.4 6 0.35 8.8 F M5 T F 0.35 8.8 Overall dimensions Terminal body mounting D min D max E min E max shroud AC F F G J M N Connection T 6 to 40.8 (30) 9.5 (35) 3.94 (00) 4.64 (37) 4.33 (0).77 (45) 0.59 (5).67 (68) 0.59 (5).8 (30).95 (75) 0.59 (5) 63 to 80.8 (30) 9.5 (35) 3.93 (00) 4.64 (37) 4.33 (0).06 (53) 0.69 (8).99 (76) 0.69 (8).38 (35) 3.35 (85) 0.69 (8) 0.3 6.96 50 0.35 F F 0.35 8.8 T 8.8 M5 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -37
Disconnect switches Dimensions in (mm) F J X M F.06 5.5 3.50 89 3.07 78 F J X M F.06 5.5 E.4 36 N G.67 68.77 45 N G.67 68 ø.79 ø 7 0.35 8.8 F T T 0.9.06 7.5 5.5 F 0.4 0.35 6 8.8.69.36 43 34.7 0.35 8.8 F T T 0.9.06 7.5 5.5 F 0.35 8.8 Direct front operation for 6/8-pole disconnects External front operation for 6/8-pole disconnects. Position for switched 4th pole ( per device max.) or auxiliary contact.. Position for auxiliary contact only. Note: Maximum of 4 auxiliary contacts, or 3 auxiliary contacts + one switched 4th pole. amps Overall dimensions body mounting Connection E min E max F F F G J M N T X 6 to 40 4.3 (05) 4.64 (37) 3.83 (98) 0.59 (5).77 (45).67 (68).9 (48.75).8 (30).95 (75) 0.59 (5) 0.9 (8) 63 to 80 4.3 (05) 4.65 (37) 4.3 (05) 0.69 (8).06 (53).99 (76).06 (5.5).38 (35) 3.35 (85) 0.69 (8) 0.34 (9) External selector and pistol handles Handle type Door drilling layouts Ø3.07 Ø78.57 40 Selector H4X-0_ Ø3.07 Ø78.4 36.79 7 3.46 88 0 Direction of front operation 90 I 0 Direction of right side operation 90 I 4 Ø 0.7 4 Ø 7.0 8 0.53 3.5 Ø. Ø 3 Ø 0.88 With 4 Mounting Screws Ø.5 0. 3 With mounting nut Selector H4X-0_.45 37.57 40 4 Ø 0.7 4 Ø 7 Pistol H4X-03_ Ø.45in/37mm screw clip (from front) Ø.in/3mm screw (from rear).0 8 H4X-03_ with 4 mounting screws -38 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches UL 98 and UL 508 enclosed disconnect switches Fused and non-fused enclosed rotary disconnect switches from 6 to 00 A in NEMA, 3R, 4, 4X, enclosures. Ratings Volts 600 Vac 50-600 Vdc* Amps 6-00 A SCCR UL 98 5-00 ka UL 508 0-65 ka *Some non-fused disconnect switches are not rated for DC applications. 0/65/EU NEMA, 3R, 4 and Disconnect switches Agency information UL 98 Listed, Guide WIAX, WIAX7, File E86 UL 508 Listed, Guide NLRV, NLRV, File E559 culus Listed to CSA Standard., No. 4 culus Listed to CSA Standard., No. 4 Conforms with IEC 60947-3 RoHS compliant CE Operating temperature -0ºC to 70ºC 4X plastic enclosure flammability ratings Polycarbonate UL 94-5V A-0 Fiberglass UL 94-5V Field installed accessories Auxiliary contacts Terminal shrouds ed 4th pole (UL 508 only) Online resources Visit Eaton.com/bussmannseries for: CAD drawings Instruction sheets UL information Features UL 98 Listed for general purpose, main disconnect, or branch circuit protection up to 600 Vac/dc UL 508 Listed for motor disconnect applications up to 600 Vac Multiple field installed accessories enhance the enclosed disconnect switches to fit the desired application Lockout/tagout: Up to three /4" shank padlocks can be installed on external handles NEMA 4X 304 stainless steel NEMA 4X polycarbonate or fiberglass BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -39
Disconnect switches UL 98 enclosed fused disconnects 30 to 800 A 3-pole UL 98 600 Vac Catalog number system: ER Enclosed Rotary disconnect NEMA rating, 3R, 4, 4X (304 SST), 4P (4X Plastic), Amp rating 30, 60, 00, 00, 400, 600, 800 Fuse class J = Class J, L = Class L Number of poles 3 = 3-pole Handle type P = Pistol Handle color B =, R = Red Catalog numbers ER 4X - 60 J 3 P B All catalog numbers provided with integral or installed lugs and a black selector handle. Order Red/yellow handle by changing the suffix B to R. NEMA, 3R, 4 and 30-800A UL 98 fused switches NEMA 4X 304 stainless steel Available Bussmann series fuses Fuse class J L Catalog symbol/type LPJ time-delay, current limiting JKS fast-acting fuses DFJ high speed drive fuse KRP-C time-delay, current limiting KTU fast-acting KLU time-delay KRP-CL (5-600 A) NEMA 4X NEMA enclosure type and catalog no. amps Fuse class 3R 4 4X plastic 4X 304 stainless 30 ER-30J3PB ER3R-30J3PB ER4-30J3PB ER4P-30J3PB ER4X-30J3PB ER-30J3PB 60 ER-60J3PB ER3R-60J3PB ER4-60J3PB ER4P-60J3PB ER4X-60J3PB ER-60J3PB 00 ER-00J3PB ER3R-00J3PB ER4-00J3PB ER4P-00J3PB ER4X-00J3PB ER-00J3PB J 00 ER-00J3PB ER3R-00J3PB ER4-00J3PB ER4P-00J3PB ER4X-00J3PB ER-00J3PB 400 ER-400J3PB ER3R-400J3PB ER4-400J3PB ER4P-400J3PB ER4X-400J3PB ER-400J3PB 600 ER-600J3PB ER3R-600J3PB ER4-600J3PB ER4P-600J3PB ER4X-600J3PB ER-600J3PB 800 L ER-800L3PB ER3R-800L3PB ER4-800L3PB ER4P-800L3PB ER4X-800L3PB ER-800L3PB Enclosures 00 A are polycarbonate, flammability rating UL 94-5V A-V0, 00 A are fiberglass, flammability rating UL 94-5V. ratings For wire types, ranges and tightening torques, see table on page -0. amps cat. no. Fuse class Poles Voltage Vac Vdc SCCR @ Vac (ka) 30 RDF30J-3 0 60 RDF60J-3 50 50 00 RDF00J-3 75 J 00 RDF00J-3 3 600 N/A 00 50 400 RDF400J-3 50 350 600 RDF600J-3 800 RDF800L-3 L 600 500 Max. Hp @ 600 Vac -40 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches UL 98 enclosed fused disconnects 30 to 800 A Enclosure weights and dimensions W family ER_-30J 30 ER_-60J 60 Amps ER_-00J 00 ER_-00J 00 ER_-400J 400 ER_-600J 600 ER_-800L 800 L Fuse class J NEMA Mounting centers h x w (in) enclosure H x W x D (in) A B C Weight (lbs), 3R, 4, 8.3x8.3 0x0x6 5 4X-SST 0.7x8.3 8.3x0.7 4X-plastic x5.6 7.6x0 8, 3R, 4, x0x6 0.3x8.3 9 4X-SST.7x8.3 8.3x0.7 4X-plastic 3x3x6 4x7.6 9.6x, 3R, 4,.3x0.3 4xx6 4X-SST 4.7x0.3.3x.7 4X-plastic 3x3x6 4x7.6 9.6x, 3R, 4,.3x8.3 4x0x8 55 4X-SST 4.7x8.3.3x0.7 4X-plastic 7xx0 5.75x4 39, 3R, 4, 46.3x34.3 48x36x 88 4X-SST 48.7x34.3 46.3x36.7 4X-plastic 5x37x4 50x8.5 86, 3R, 4, 46.3x34.3 48x36x 6 4X-SST 48.7x34.3 46.3x36.7 4X-plastic 5x37x4 50x8.5 4, 3R, 4, 46.3x34.3 48x36x 6 4X-SST 48.7x34.3 46.3x36.7 4X-plastic 5x37x4 50x8.5 4 Enclosures 00 A are polycarbonate, flammability rating UL 94-5V A-V0, 00 A are fiberglass, flammability rating UL 94-5V. Available field-installed accessories - order separately Auxiliary contacts - for 30 to 800 amp switches A MW W B MW W C MH H H MH MH H Disconnect switches Contact type No. of contacts Cont. amp rating Vac Max. units per switch NO 4 (30 to 00 A) BAC05 0 600 NC 8 (400 to 800 A) BAC06 MW Terminal shrouds For 00 to 800 amp switches - includes terminal shroud for lineside or loadside amps Poles 00 TSH8-3TB 400 3 TSH9-3TB 600-800 TSH0-3TB BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -4
Disconnect switches UL 98 enclosed non-fused disconnects 30 to 00 A 30-800A UL 98 non-fused switches 3-pole UL 98 600 Vac Catalog number system: ER 4X - 60 N 3 P B ER Enclosed Rotary disconnect NEMA rating, 3R, 4, 4X (304 SST), 4P (4X Plastic), Amp rating 30, 60, 00, 00, 400, 600, 800, 00 N = non-fused Number of poles 3 = 3-pole Handle type P = Pistol Handle color B =, R = Red NEMA, 3R, 4 and NEMA, 3R, 4 and NEMA 4X 304 stainless steel 00-00A UL 98 non-fused switches NEMA 4X 304 stainless steel NEMA 4X NEMA 4X Catalog numbers All Catalog numbers provided with integral or installed lugs and a black selector handle. Order Red/yellow handle by changing the suffix B to R. NEMA enclosure type and catalog no. Amps 3R 4 4X plastic 4X 304 stainless 30 ER-30N3PB ER3R-30N3PB ER4-30N3PB ER4P-30N3PB ER4X-30N3PB ER-30N3PB 60 ER-60N3PB ER3R-60N3PB ER4-60N3PB ER4P-60N3PB ER4X-60N3PB ER-60N3PB 00 ER-00N3PB ER3R-00N3PB ER4-00N3PB ER4P-00N3PB ER4X-00N3PB ER-00N3PB 00 ER-00N3PB ER3R-00N3PB ER4-00N3PB ER4P-00N3PB ER4X-00N3PB ER-00N3PB 400 ER-400N3PB ER3R-400N3PB ER4-400N3PB ER4P-400N3PB ER4X-400N3PB ER-400N3PB 600 ER-600N3PB ER3R-600N3PB ER4-600N3PB ER4P-600N3PB ER4X-600N3PB ER-600N3PB 800 ER-800N3PB ER3R-800N3PB ER4-800N3PB ER4P-800N3PB ER4X-800N3PB ER-800N3PB 00 ER-00N3PB ER3R-00N3PB ER4-00N3PB N/ A ER4X-00N3PB ER-00N3PB Enclosures 00 A are polycarbonate, flammability rating UL 94-5V A-V0, 00 A are fiberglass, flammability rating UL 94-5V. ratings For wire types, ranges and tightening torques, see table on page -7. Amps catalog no. Poles Vac SCCR (ka) Max. Hp @ 600 Vac 30 RD30-3 5 00 60 RD60-3 50 00 RD00-3 5/00* 00 RD00-3 00 3 600 400 RD400-3 00 350 600 RD600-3 800 RD800-3 00 500 00 RD00-3 * 5 ka @ 600 Vac, 00 ka @ 480 Vac. -4 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches UL 98 enclosed non-fused disconnects 30 to 00 A Enclosure weights and dimensions Catalog no. family ER_-30 30 ER_-60 60 Amps ER_-00 00 ER_-00 00 ER_-400 400 ER_-600 600 ER_-800 800 ER_-00 00 NEMA Mounting centers h x w (in) enclosure H x W x D (in) A B C Weight (lbs), 3R, 4, 8.3x6.3 0x8x6 4X-SST 0.7x6.3 8.3x8.7 4X-plastic () 9x9x6 0x3.6 5.6x8 5, 3R, 4, 8.3x6.3 0x8x6 4X-SST 0.7x6.3 8.3x8.7 4X-plastic () 9x9x6 0x3.6 5.6x8 5, 3R, 4, 0.3x8.3 x0x6 4X-SST.7x8.3 8.3x0.7 4X-plastic () 3x3x6 4x7.6 9.6x 8, 3R, 4, 8.3x4.3 39 0x6x8 4X-SST 0.7x4.3 8.3x6.7 39 4X-plastic () 0x7x.5x0. 3, 3R, 4, 34.3x8.3 36x30x8 4X-SST 36.7x8.3 34.3x30.7 4X-plastic () 37x3x4 38x8.9 03, 3R, 4, 46.3x34.3 09 48x36x 4X-SST 48.7x34.3 46.3x36.7 09 4X-plastic () 5x37x 4 50x8.5 87, 3R, 4, 46.3x34.3 48x36x 4X-SST 48.7x34.3 46.3x36.7 4X-plastic () 5x37x 4 50x8.5 89, 3R, 4, 60x36x6 58.3x34.3 68 4X-SST 60x36x6 60.7x34.3 58.3x36.7 68 Enclosures 00 A are polycarbonate, flammability rating UL 94-5V A-V0, 00 A are fiberglass, flammability rating UL 94-5V. W A MW W B MW W C MW MH H H MH MH H Disconnect switches Available field-installed accessories - order separately Auxiliary contacts for 30 to 00 amp switches. amps Contact type No. of contacts Cont. amp rating Vac Max. units per switch 30-00 NO + NC of each BAC0* 0 40 4 NO BAC0* 00-00 NO + NC of each BAC03** 0. 5-50 NO + NC of each BAC04** NO + NC of each BAC** 5 NO + NC of each BAC** * Two () Units per switch max. ** For one auxiliary contact, install either BAC03 or BAC. For two auxiliary contacts, install BAC03 + BAC04, or BAC + BAC. Terminal shrouds for 00 to 800 amp switches amps Poles Location on switch 30-00 Lineside and loadside TSH3-3TB 00 Lineside TSH4-3T Loadside TSH4-3B 400 3 Lineside TSH5-3T Loadside TSH5-3B 600 TSH6-3TB Lineside or loadside 800-00 TSH7-3TB BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -43
Disconnect switches UL 508 enclosed non-fused disconnect 6 to 80 A 3-/6-pole UL 508 600 Vac Catalog number system: 6-80 A UL 508 non-fused switches ER 4X - 63 N 6 P B ER Enclosed Rotary disconnect NEMA rating, 3R, 4, 4X (304 SST), 4P (4X Plastic), NEMA, 3R, 4 and NEMA 4X 304 stainless steel NEMA 4X Amp rating 6, 5, 40, 63, 80 N = non-fused Number of poles 3 = 3-pole Handle type P = Pistol Handle color B =, R = Red * 6-Pole switches only, selector handle does not interlock the enclosure door. ** 3-pole switches only. Catalog numbers All catalog numbers provided with a black selector handle. Order red/ yellow handle by changing the suffix B to R. Amps 6 5 40 63 80 NEMA enclosure and catalog no. Poles 3R 4 4X plastic 4X 304 stainless 3 ER-6N3PB ER3R-6N3PB ER4-6N3PB ER4P-6N3PB ER4X-6N3PB ER-6N3PB 6 ER-6N6SB ER3R-6N6SB ER4-6N6SB ER4P-6N6SB ER4X-6N6SB ER-6N6SB 3 ER-5N3PB ER3R-5N3PB ER4-5N3PB ER4P-5N3PB ER4X-5N3PB ER-5N3PB 6 ER-5N6SB ER3R-5N6SB ER4-5N6SB ER4P-5N6SB ER4X-5N6SB ER-5N6SB 3 ER-40N3PB ER3R-40N3PB ER4-40N3PB ER4P-40N3PB ER4X-40N3PB ER-40N3PB 6 ER-40N6SB ER3R-40N6SB ER4-40N6SB ER4P-40N6SB ER4X-40N6SB ER-40N6SB 3 ER-63N3PB ER3R-63N3PB ER4-63N3PB ER4P-63N3PB ER4X-63N3PB ER-63N3PB 6 ER-63N6SB ER3R-63N6SB ER4-63N6SB ER4P-63N6SB ER4X-63N6SB ER-63N6SB 3 ER-80N3PB ER3R-80N3PB ER4-80N3PB ER4P-80N3PB ER4X-80N3PB ER-80N3PB 6 ER-80N6SB ER3R-80N6SB ER4-80N6SB ER4P-80N6SB ER4X-80N6SB ER-80N6SB Polycarbonate enclosure flammability rating UL 94-5V A-V0. ratings For wire types, ranges and tightening torques, see table on page -35. Amps catalog no. Vac SCCR with max upstream Class J fuse Max. Hp @ 600 V 6 RD6-3-508 0 65 ka /30 A 5 RD5-3-508 0 40 RD40-3-508 600 65 ka /30 A 0 ka / 60 A 5 63 RD63-3-508 65 ka /60 A 50 ka / 00 A 40 80 RD80-3-508 50 ka / 00 A 40 Note: Voltage, SCCR and horsepower ratings are the same for 3- and 6-pole switches. -44 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries
Disconnect switches UL 508 enclosed non-fused disconnect 6 to 80 A Enclosure weights and dimensions W NEMA enclosure, 3R, 4, 4X-304 SST Mounting centers h x w (in) A B C Weight (lbs) Poles amps H x W x D (in) 3 8x6x6 6.3x4.3 8 6 6-80 0x8x6 8.3x6.3 3 8x6x6 8.7x4.3 6.3x6.7 8 6 0x8x6 0.7x6.3 8.3x8.7 4X-plastic 80 9.4x8.7x5.9 0x3.6 5.6x8 5 3 6-63 7.4x8.7x5.8 8x3.6 3.6x8 4 6 6-8 A.4x0.7x6.3 x5.6 7.6x0 6 Polycarbonate. Available field-installed accessories - order separately Auxiliary contacts A MW W B MH H H MH Disconnect switches Cont. Contact type No. of contacts amp rating Vac Max. units per switch NO + NC Ea. BAC0 0 40 ( per side, 4 contacts total) NO BAC0 MW W Auxiliary contact configurations C MH H Terminal shrouds Includes terminal shroud for both lineside and loadside. MW amps Poles Location on switch 6-40 TSH-3TB 3 Lineside and loadside 63-80 TSH-3TB ed 4 th pole Converts 3-pole switch to 4-pole switch. amps 6 POLE-6 5 POLE-5 40 POLE-40 BUSSMANN SERIES FULL LINE CATALOG 007 JUNE 07 Eaton.com/bussmannseries -45
BUSSMANN SERIES Selective coordination has never been easier. With the BussmannTM series Quik-Spec Coordination Panelboard (QSCP), it s simple and cost-effective to selectively coordinate using published circuit breaker/fuse and fuse/fuse ratio tables. What s more, the compact panelboard features a footprint equal to circuit breaker panels but 40% smaller than traditional fusible panels. Its safetyfocused design includes finger-safe branches, branch fuse interlock and fuse ampacity rejection. And with up to 00 ka short-circuit current rating (SCCR), the QSCP easily withstands high fault currents. Learn more at Eaton.com/bussmannseries. Follow us on social media to get the latest product and support information.