ELIPT Image Range Luminaire designed by: J-M WILMOTTE ELIPT Elipt is a well-born luminaire, a cross between just the right lines and a millimetric measuring of its volumes. Combined with a rich range of brackets, Elipt maintains a timeless effect of balance in all circumstances. Its subtly modern look blends easily with all environments, providing a dose of energy and dynamism. Elipt comes in three sizes, which can be found in the «Image» and «Lumière» collections The palette of combinations is completed by a multitude of brackets and arms underscoring the undeniable appeal of this luminaire Elipt LED also benefi ts from the latest developments in ECLATEC LED technology (ORA LEDS module, ORA LENS lenses, ORA DRIVE driver) IMAGE RANGE LUMINAIRES // page 158 LED // page 212 LUMIERE RANGE // page 90 The 45 and 55 versions of the Elipt were entirely redesigned in 2008 (V3), whilst retaining the basic aesthetics: the main aluminium components are now cast by injection, which has improved the quality of execution, ingress protection and overall functionality
ELIPT Image Range Luminaire designed by: J-M WILMOTTE 41
ELIPT Image Range Luminaire designed by: J-M WILMOTTE ELIPT TOP ELIPT TRACK 6 m 5 m 4 m 3 m Elipt Top assembly Elipt Track assembly bracket Recommended height: 4 to 6m Configurations: single bracket (Track 11), double bracket (Track 24) Recommended height: 4 to 6m Top bracket: cast aluminium Tilt 10 Post Top Mounted Track 11 and Track 24 tips: tubular steel Male mounting bracket for pole top fi tting
ELIPT CHROME ELIPT HEAD ELIPT TOTEM ELIPT PARA ELIPT Image Range Luminaire designed by: J-M WILMOTTE 43 Elipt Chrome assembly Elipt Head assembly Elipt Totem assembly Elipt Para assembly bracket, rear bracket, wall bracket Recommended height: 4 to 6m bracket Recommended height: 4 to 6m bracket Pole height: 4.7m bracket, wall bracket, rear bracket Recommended height: 4 to 6m Chrome bracket: steel Outreach 500mm and 1000mm Male mounting bracket for pole top fi tting Pathway bracket: aluminium Outreach 500mm Optional: pathway bracket with fastening plate Wall bracket: aluminium Outreach 500mm Head bracket: aluminium Bracket top mounted on the pole Outreach 300mm Fastening plate: cast aluminium Totem pole: consists of a tubular galvanised steel base and a cylindrical glued-laminated larch shaft Ø 140mm (cf. page 248) Para bracket: curved aluminium Outreach 800mm and 1000mm Male mounting bracket for pole top fi tting Wall bracket: aluminium Outreach 800mm Pathway bracket: aluminium Outreach 500mm
ELIPT Lumière Range Luminaire designed by: J-M WILMOTTE ELIPT Elipt is a well-born luminaire, a cross between just the right lines and a millimetric measuring of its volumes. Combined with a rich range of brackets, Elipt maintains a timeless effect of balance in all circumstances. Its subtly modern look blends easily with all environments, providing a dose of energy and dynamism. Elipt comes in three sizes, which can be found in the «Image» and «Lumière» collections The palette of combinations is completed by a multitude of brackets and arms underscoring the undeniable appeal of this luminaire Elipt also benefi ts from the latest developments in ECLATEC LED technology (ORA LEDS module, ORA LENS lenses, ORA DRIVE driver) IMAGE RANGE // page 40 LUMINAIRES // page 158 LED // page 212 LUMIERE RANGE The 45 and 55 versions of the Elipt were entirely redesigned in 2008 (V3), whilst retaining the basic aesthetics: the main aluminium components are now cast by injection, which has improved the quality of execution, ingress protection and overall functionality
ELIPT Lumière Range Luminaire designed by: J-M WILMOTTE 91
ELIPT Lumière Range Luminaire designed by: J-M WILMOTTE ELIPT TONGA ELIPT ACCORD 10 m 9 m 8 m 7 m 6 m 5 m Elipt Tonga assembly Elipt Accord assembly bracket, wall bracket Recommended height: 6 to 9m Tonga bracket: steel Outreach 1000mm Bracket post top mounted on the pole Wall bracket: steel Outreach 500mm bracket, wall bracket, pathway bracket Accord bracket: aluminium Outreach 600mm, 1315mm Bracket post top mounted Pole: special cylindriconical steel Ø 110mm with spigot Ø 90 x 110mm Heights: 6.5m, 7.5m, 8.5m and 9.5m Wall bracket: aluminium Outreach 400mm and 1315mm Pathway bracket: aluminium Outreach 40 mm on a collar clamp
ELIPT ARCHITEK ELIPT CYTISE ELIPT PROFIL ELIPT VECTEUR ELIPT Lumière Range Luminaire designed by: J-M WILMOTTE 93 Elipt Architek assembly Design J-M Wilmotte Elipt Cytise assembly Elipt Profil assembly Design J-M Wilmotte Elipt Vecteur assembly Design J-M Wilmotte bracket, wall bracket, rear bracket Architek bracket: aluminium Outreach 615mm, 915mm and 1315mm Bracket post top mounted Pole: special cylindroconical steel Ø 110mm with spigot Ø 90 x 110mm Heights: 6.5m, 7.5m, 8.5m and 9.5m Wall bracket: aluminium Outreach 1000mm Pathway bracket: aluminium Outreach 400mm on a collar clamp bracket, wall bracket, pathway bracket Recommended height: 6 to 9m Cytise bracket: steel Outreach 800mm, 1000mm and 1200mm Tilt 10 Male mounting bracket for pole top fi tting Shown with decorative aluminium tip (optional, cf. page 299) Wall bracket: steel Outreach 600mm, 800mm and 1000mm Pathway bracket: steel Outreach 600mm and 800mm bracket, wall bracket, pathway bracket Profil bracket: aluminium Outreach 1200mm Bracket post top mounted Pole: special cylindroconical steel Ø 110mm with spigot Ø 90 x 110mm Heights: 6.5m, 7.5m, 8.5m and 9.5m Wall bracket: aluminium Outreach 1200mm Pathway bracket: aluminium Mounted on a fastening plate bracket, wall bracket, pathway bracket Vecteur bracket: aluminium Outreach 1200mm and 1800mm Luminaire mounted on a U-bracket adjustable by lateral crankpins Bracket post top mounted Pole: special cylindroconical steel Ø 110mm with spigot Ø 90 x 110mm Heights: 6.5m, 7.5m, 8.5m and 9.5m Wall bracket: aluminium Outreach 700mm and 1200mm Pathway bracket: aluminium Outreach 700mm
ELIPT Luminaires Design: J-M WILMOTTE 450 550 650 156 183 183 Flat glass 450 550 650 ELIPT Truncated-cone shape bowl Curved bowl 190 205 450 270 237 550 260 243 650 Information for specifiers ELIPT 45 ELIPT 55 ELIPT 65 Luminaire available 3 homothetic sizes: Elipt 45, Elipt 55, Elipt 65 IP66 Truncated-cone shape PMMA bowl IK07 Truncated-cone shape polycarbonate bowl IK10 Flat glass and rounded thermally toughened glass bowl IK08 Eclapak version available, with sealed optical unit Class I or II Cast aluminium frame Spun aluminium dome Refl ectors in polished, anodised aluminium, Optitec 20, 27 and 34 Control gear integrated on a removable tray Luminaire available in top, side mounted, suspended or catenary versions Luminaire opens without tools Options: louver in mat black aluminium (truncated-cone shape and curved bowls only), fl at silkscreen printed glass Polyester powder coating, any RAL colour available Sources Model HPS MH MH PGZ12 Elipt 45 50W (E27) 35W (E27) 45W 70W (E27) 50W (E27) 60W 100W (E40) 70W (E27) 90W 150W (E40) 100W (E40) 140W / 150W (E40) / Elipt 55 100W (E40) 100W (E40) 60W 150W (E40) 150W (E40) 90W 250W (E40) 250W (E40) 140W Elipt 65 150 W(E40) 150W (E40) / 250W (E40) 250W (E40) / 400W (E40) 400W (E40) / Eco design Elipt includes ferromagnetic and electronic ballasts and dimming solutions Elipt is eligible for the Energy Effi ciency Certifi cate, ULOR < 3 % Complies with the European RoHS directive Recyclability rate of over 95% Material analysis Elipt 45 curved bowl: Aluminium 68%, Glass 19%, Steel 8%, Other 5% Elipt 55 curved bowl: Aluminium 60%, Glass 29%, Steel 7%, Other 4% Elipt 65 truncated-cone shape bowl: Aluminium 81%, Steel 8%, Plastic 7%, Others 4% Weight - Windage (with max. control gear) Elipt 45: 9.3kg - 0.07m² - 150W Elipt 55: 11.5kg - 0.09m² - 250W Elipt 65: 15.0kg - 0.13m² - 400W
Photometric distributions Multiple lamp adjustment possibilities Typical photometric data Elipt - Eclapak 27 - MH 150W E40 Imax = 508 cd/klm 0 cd/klm C90 - C270 C0 - C180-90 90-45 400 0 45 Elipt - Optitec 20 - CW 140W Imax = 444 cd/klm 0 cd/klm C90 - C270 C0 - C180-90 90 Luminaire tilted 10 l/h -1-0.5 0 0.5 1 1.5 Luminaire tilted 10 70% 51,2% 20% 10% 0% 70% 52,2% Mechanical interfaces LRL: Elipt side entry with plain swivel joint coupled with sleeve for bracket end with external Ø 60mm LR: Elipt side entry with swivel joint and Ø ¾ thread for female boss welded onto pole or bracket Top: Elipt Top or Bitop fi tting for pole Ø 60/62mm Luminaire tilted to 10 IP rating LL: Elipt side entry coupled with sleeve for bracket end Degree of protection IP66 according to with external Ø 60mm standard EN 60529 High temperature extruded silicone pneumatic seal on bowl Elipt LR on cast aluminium Luminaire breathes through activated fastening plate carbon fi lter Cable gland with anchoring device ELIPT Luminaires Design : J-M WILMOTTE 20% - 45 400 0 45 l/h -1-0.5 0 0.5 1 1.5 10% 0% Elipt LR on cast aluminium wall bracket Elipt - Optitec 27 -MH 150W E40 Luminaire tilted 10 Imax = 367 cd/klm 0 cd/klm C90 - C270 C0 - C180-90 90 70% 49,1% SR: Elipt suspended with swivel joint 159-45 400 0 45 l/h -1-0.5 0 0.5 1 1.5 20% 10% 0% CATELUX cf. page 296 Elipt - Optitec 34 - HPS 250W Luminaire tilted 10 Imax = 574 cd/klm 0 cd/klm C90 - C270 C0 - C180-90 90 70% 52,3% SCO: Elipt on catenary mounting Air expelled when luminaire is switched on - 45 640 0 45 20% 10% 0% Air taken in when luminaire is switched off l/h -1-0.5 0 0.5 1 1.5 Maintenance - Opening and closing of the luminaire - Control gear maintenance - Maintenance of the lamp Luminaire opens without tools by means of 3 quarter turn wing screws Protector swivels on an aluminium hinge Direct access to the control gear by hinging down the refl ector The control gear is mounted in the luminaire body on a removable tray Electrical connection using quick connectors Direct access to the lamp after opening the bowl diffuser, by means of 3 quarter turn wing screws
ELIPT LED Luminaires Design : J-M WILMOTTE Ø 455 175 ELIPT 45 ORA LEDS Ø 555 215 ELIPT 55 ORA LEDS In the LED version, ELIPT is available in 2 homothetic sizes: Elipt 45 and Elipt 55 These LED luminaires use mainly the same components as the Elipt models with discharge lamps. The combinations of brackets and arms are the same as for the versions with traditional lamps in order to allow aesthetic continuity with items already in place. The lighting is provided by ORA LEDS module. The refl ectors and control gear are interchangeable with existing items. ELIPT Applications Main roads and secondary urban and distributor roads Cycle paths, pedestrian walkways, residential areas Recommended heights: Elipt 45: 4 to 6m Elipt 55: 6 to 8m Information for specifiers Luminaire available in 2 sizes: Elipt 45 and Elipt 55 IP66 IK08 Class I and II Spun aluminium dome Injected aluminium body and frame Luminaire available with Top, Side entry and Suspended mountings Polyester powder coating, any RAL colour available ORA LEDS Module Optional functionalities: - motion sensor (ORA LEDS 46) with dimmable option and timer - control options (astronomical clock, telemanagement) Sources ELIPT 45 takes the ORA LEDS 46 module (46 LEDs) in version R0 or R7 Total power consumption with 350mA power supply: 64W ELIPT 55 takes the ORA LEDS 66 module (66 LEDs) in version R0 or R7 Total power consumption with 350mA power supply: 88W Eco design Complies with the European RoHS directive Eligible for the Energy Effi ciency Certifi cate with ULOR < 3% High recyclability rate Standardised module including: - injected aluminium optical plate, each LED with an individual ORA LENS lens for asymmetrical lighting distribution. Two tilt angles available according to type of mounting: pre-tilted to 7 (R7), or tilt 0 (R0) Plate available in two colours: sand grey 150 and sand grey 900 - Injected aluminium heat cooler - power unit, ORA DRIVE multifunctional driver, dimmer and power connection Road type distribution (highly extensive) Colour temperature 4300K (neutral white) ORA DRIVE driver with integrated thermal protection Material analysis (with power unit) Elipt 45: Aluminium 84%, Others 9%, Steel 4%, Plastic 3% Elipt 55: Aluminium 86%, Others 7%, Steel 4%, Plastic 3% Weight - Windage Elipt 45: 9.9kg - 0.07m² Elipt 55: 13.7kg - 0.09m²
Photometric distributions _ Typical photometric data Elipt 45/55 - ORA LEDS R0-46/66 LEDs Imax = 640 cd/klm 0 cd/klm C90 - C270 C0 - C180-90 90-45 400 0 45 Mechanical interfaces Luminaire tilted 5 l/h -1-0.5 0 0.5 1 1.5 LRL: Elipt side entry with plain swivel joint coupled with sleeve for bracket end with external Ø 60mm LR: Elipt side entry with swivel joint and Ø ¾ thread for female boss welded onto pole or bracket 70% 20% 10% 0% Elipt 45/55 - ORA LEDS R7-46/66 LEDs Imax = 567 cd/klm IP rating cd/klm 0 C90 - C270 C0 - C180-90 90-45 400 0 45 Luminaire tilted 5 l/h -1-0.5 0 0.5 1 1.5 Degree of protection IP66 according to standard EN 60529 High temperature extruded pneumatic silicone gasket Cable gland with anchoring device Luminaire breathes through activated carbon fi lter 70% 20% 10% 0% ELIPT LED Luminaires Design : J-M WILMOTTE Top: Elipt Top or Bitop fi tting for pole Ø 60/62mm Luminaire tilted to 10 LL: Elipt side entry coupled with sleeve for bracket end with external Ø 60mm 213 Elipt on cast aluminium fastening plate Elipt on cast aluminium wall bracket CATELUX cf. page 296 SR: Elipt suspended with swivel joint SCO: Elipt on catenary mounting Maintenance - Opening and closing - ORA LEDS maintenance Opening of luminaire by 3 quarter turn screws LED plate swivels on an aluminium hinge Direct access to the ORA LEDS module Quick connectors for power unit ORA LEDS module interchangeable on site