Certificate of Approval

Similar documents
8-7 Heavy vehicle kingpin or socket coupling (for towing a semi-trailer)

CERTIFICATE OF CONFORMITY

8-6 Heavy vehicle fifth wheel or ball coupling (for towing a semi-trailer)

12-5 Heavy vehicle fifth wheel or ball coupling (for towing a semi-trailer)

Level 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Delsa Marmi Pty Ltd

AS/NZS 3112:2004 AS/NZS

Introduction. Applications. Materials of Construction

Helena Snyman - Technical Manager and Sydney Bhengu - Customer Support Technologist Elster Kent Metering (Pty) Ltd. South Africa

Electricity Safety (Electrical Installations) Regulation 2005

Australian/New Zealand Standard

POULTRY WINCHES New Winching Solutions for Poultry Applications

AS/NZS 3131:2001 AS/NZS

Preventative Maintenance. The key to accuracy, reliability and longevity for your first-class analysers from MEP Instruments

PRODUCT MANUAL. Backpack Sprayer 12L

INSTALLATION SPECIFICATION SHEET These instructions must be used in conjunction with the 'General Installation Instructions' for Masport wood fires.

P High Voltage Catalogue Cables Australia Powering your Project

Australian/New Zealand Standard

PRODUCT MANUAL. Heavy Duty Shoulder Sprayer 5L & 8L

PRODUCT MANUAL. Heavy Duty Backpack Sprayer 16L

UWA Electrical Safety Procedure

Land Transport Rule Heavy Vehicles Preface to Consolidated Rule with amendments incorporated as at 1 December 2016

Over 330 Clarifier installations in 3 continents

Australian/New Zealand Standard

Level 2. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Watersave Australia Pty Ltd

DEPARTMENT OF HEALTH

AS/NZS :2016. Grid connection of energy systems via inverters AS/NZS :2016. Part 1: Installation requirements

Chain-saws (combustion engine powered)

CIRCULAR CLARIFIER SYSTEMS

ELECTRICIANS REGULATIONS EXAMINATION 25 June 2011

CRITO Connection technology. Double and triple T and TCC section busbars

Technical Standard - TS 129. Small Inverter Energy Systems (IES) - Capacity not exceeding 30kW. SA Power Networks. Published: November 2017

Land Transport (Driver Licensing) Rule

INSTALLATION SPECIFICATION SHEET

KRONOS MULTI FUEL INSTALLATION SPECIFICATION SHEET MODEL

Clipsal Lifesaver Portable Power Outlet with RCBO protection 485 Series

Equivalency Certificate (Approval issued by the competent authority of Canada)

Certificate of Conformity

185-40(02) (Head Restraints)

Motor Vehicle Drivers Instructors Regulations 1964

Land Transport Rule Traction Engines [2008]

Landmark Rooftop Packaged Units

Certificate of Conformity

Australian/New Zealand Standard

FIRE TEST REPORT FH 5154

INSTALLATION SPECIFICATION SHEET These instructions must be used in conjunction with the 'General Installation Instructions' for Masport wood fires.

OWNER S OPERATING MANUAL

OWNER S OPERATING MANUAL

Australian/New Zealand Standard

28 Exhaust emissions standard compliance

Non-woven nylon web impregnated with resin. Applied to clean industrial surfaces without removing the parent material.

Information from ZARGES: the latest version of EN

Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts

Hedge trimmers (combustion engine powered)

Electricity Safety (Installations) Regulations 2009

WELLINGTON, NEW ZEALAND. PURSUANT to sections 152, 155(a) and (e) and 158(a)(i) of the Land Transport Act 1998

10 Load restraints Load anchorages. Reasons for rejection. Mandatory requirements. Mandatory equipment. Condition. Modification and repair

AURELIA METALS LTD 2016 Annual Report

Health and Safety at Work (Hazardous Substances Thermoplastic Stationary Tanks) Safe Work Instrument 2017

Accessory Fitting Instructions

Electric Vehicle Charging Safety Guidelines Part 2: Selection and Installation

Medical & Surgical Lighting Pty Ltd SERIES 1 & 3 MEDICAL EXAMINATION LIGHTS

EU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL

Electric Vehicle Charging Safety Guidelines Part 1: Safety Fundamentals Edition DRAFT

Monowills Look for the Monowills brand on the components, to ensure you have the genuine article.

01 CONTENTS. e-beam. e-beam. Technical Information 03

Australian Standard. Stand-alone power systems. Part 1: Safety requirements AS

Offshore manufacturing and fabrication: guidelines for heavy trailers (class TC and TD)

PS24/AC Volt AC 16 Amp

Tillers Motor hoes (combustion engine powered)

Precision engineered to the highest Australian Standards, you ll find Ardent copper fittings and coils for just about every application. Ardent.

ESS Lighting Instruction Pack Original Energy Saver

DALI Switch Mechanisms DCDAL31 Series Installation Instructions

Restrained Plugs and Receptacles for South Africa

Variable Frequency Drive NEW! Moving your Control. Forward VFD from Unitronics kW Single Phase kW Three Phase

Ecoglo HYU Hybrid Photoluminescent Exit Signs: Compliance with NZBC F8/AS1

78 Fuel Consumption Import Statement System. Overview. Fuel consumption information for importers. Background. System overview

Resistance Thermometers Model TR602, for Flat Surfaces Model TR603, for Pipe Surfaces

Glazing, Windscreen Wipe and Wash, and Mirrors 1999

Level 2. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Gracott Industries Pty Ltd

OPERATING INSTRUCTIONS

OWNER S OPERATING MANUAL

Information Bulletin. Fire Pump Battery Failures. Version 1.1 Approved for release August 2011

Commercial Kitchen Exhaust Fans

B&R Enclosures UNIVERSAL PB. brenclosures.com.au

(Text with EEA relevance)

FSP AUSTRALIA PTY LTD Locker Catalogue

Gazette GOVERNMENT NOTICES

NEW AND EXTREME HIGH QUALITY CABLE GUARDS RED LINE USE WITH HIGH VOLUME VEHICULAR TRAFFIC

Battery Pack Charger OpenStage WL 3 / OpenStage WL3 Plus. Installation Guide A31003-M2000-J

FAQ s. Designing metering switchboards as per Victorian service installation rules

Construction Safety Amendment (Amusement Devices) Regulation 1998

RedFlow Technologies Ltd

28 Exhaust emissions standard compliance

Certificate of Approval NMI 12/1/8

AS/NZS 4801:2001 Occupational Health and Safety Management

IMPORTANT INFORMATION ABOUT THIS APPLICATION

FOR NEW ZEALAND. T-604 WASTE DISPOSER B. HYDRAULIC CHARACTERISTICS &TECHNICAL SPECIFICATIONS. DECLARATION OF COMPLIANCE

Utilities (Technical Regulation) (Electricity Transmission Supply Code) Approval 2016 (No 1)*

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016

Comb busbars. Description Part No. $NZ

Transcription:

Certificate of Approval This is to certify that the Director of Energy Safety has approved the electrical equipment described hereunder. Registered Declarant: Australia Pty Ltd 1 Heathcote Road, Liverpool, NSW 2170 Required Marking: ESV170166 Electrical equipment covered by this approval must comply in all respects with the approved article, and prior to being supplied or offered for supply, must be clearly and indelibly marked with the required marking indicated above, or the Regulatory Compliance Mark (RCM) provided that the requirements of all relevant parts of AS/NZS 4417 applicable to the article are fulfilled. Any modifications to the electrical equipment or its place of manufacture must be approved by Energy Safe Victoria prior to the equipment being supplied or offered for supply. Notification must be given to Energy Safe Victoria of any change to the name or address of the holder of the certificate within 20 business days. ARTICLE DETAILS Electrical Equipment: Level 3 Building wiring cable Building wiring cable Relevant Standards: AS/NZS 5000.2:2006 Expiry Date: 11 April 2022 Conditions of Approval: DATE OF APPROVAL:11 April 2017 Page: (2/ 13) Director of Energy Safety

Approval details Model 20199992 450/750V 1.0(S)X2C FLAT ACT WH 450/750V 2x1.0mm2 Cu Flat V-90 insulation (Red/white), 3V-90 Model 20199993 450/750V 1.0(S)X2C 450/750V 2x1.0mm2 Cu Flat V-90 Model 20199994 450/750V 1.0(S)X2C+1.0(S)E 450/750V 2x1.0mm2+1.0mm2 Earth (Red/GY/Black), 3V-90 Sheath(White ) Model 20199991 450/750V 1.0(S)X2C+E 450/750V 2x1.0mm2+1.0mm2(stranded) Earth (Red/GY/Black), 3V-90 Sheath(White ) DATE OF APPROVAL:11 April 2017 Page: (3/ 13) Director of Energy Safety

Model 20200032 450/750V 1.0(S)X3C FLAT LEMON 450/750V 3x1.0mm2 Flat V-90 insulation (Red/white/Blue), 3V-90 Sheath(Lemon) Model 20200031 450/750V 1.0(S)X3C 450/750V 3x1.0mm2 Flat V-90 insulation (Red/white/Blue), 3V-90 Model 20199997 450/750V 1.5X2C FLAT ACT RD 450/750V 2x1.5mm2 Cu Flat V-90 insulation (Red/white), 3V-90 Sheath(Red) Model 20199996 450/750V 1.5X2C FLAT ACT WH WPR2013 Pt2 EE1301 450/750V 2x1.5mm2 Cu Flat V-90 insulation (Red/white), 3V-90 Model 20199999 450/750V 1.5X2C DATE OF APPROVAL:11 April 2017 Page: (4/ 13) Director of Energy Safety

450/750V 2x1.5mm2 Cu Flat V-90 Model 20199995 450/750V 1.5X2C+E WPR2013 Pt2 EE1302 450/750V 2x1.5mm2+1.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(White ) Model 20200001 450/750V 1.5X2C+E NZ 450/750V 2x1.5mm2+1.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(White ) Model 20200037 450/750V 1.5X3C FLAT LEMON 450/750V 3x1.5mm2 Flat V-90 insulation (Red/white/Blue), 3V-90 Sheath(Lemon) Model 20200035 450/750V 1.5X3C DATE OF APPROVAL:11 April 2017 Page: (5/ 13) Director of Energy Safety

450/750V 3x1.5mm2 Flat V-90 insulation (Red/white/Blue), 3V-90 Model 20200038 450/750V 1.5X3C+E FLAT OR 450/750V 3x1.5mm2 + 1.5mm2 Flat V- 90 insulation (Red/white/GY/Black), 3V-90 Sheath(Orange) Model 20204035 450/750V 1.5X3C+E FLAT RWBK/BU AIRCON 450/750V 3x1.5mm2 + 1.5mm2 Flat V- 90 insulation (Red/white/GY/Black), 3V-90 Sheath(Blue) Model 20204032 450/750V 1.5X3C+E FLAT RWBU/BU AIRCON 450/750V 3x1.5mm2 + 1.5mm2 Flat V- 3V-90 Sheath(Blue) Model 20200034 450/750V 1.5X3C+E 450/750V 3x1.5mm2 + 1.5mm2 Flat V- 90 insulation (Red/white/GY/Black), 3V-90 DATE OF APPROVAL:11 April 2017 Page: (6/ 13) Director of Energy Safety

Model 20200027 450/750V 10X2C FLAT OR WPR2013 Pt2 EE1133 450/750V 2x10mm2 Cu Flat V-90 Sheath(Orange) Model 20200025 450/750V 10X2C 450/750V 2x10mm2 Cu Flat V-90 Model 20200026 450/750V 10X2C+E 450/750V 2x10mm2+4 mm2 Earth Cu 3V-90 Model 20200030 450/750V 16X2C FLAT OR WPR2013 Pt2 EE1131 450/750V 2x16mm2 Cu Flat V-90 Sheath(Orange) Model 20200028 450/750V 16X2C DATE OF APPROVAL:11 April 2017 Page: (7/ 13) Director of Energy Safety

450/750V 2x16mm2 Cu Flat V-90 Model 20200369 450/750V 16X2C+2.5X1 FLAT BK 450/750V 2x16mm2+2.5 mm2 Cu Flat V-90 insulation (Red/Orange/Black), 3V-90 Sheath(Black) Model 20200029 450/750V 16X2C+E 450/750V 2x16mm2+6 mm2 Earth Cu 3V-90 Model 20200004 450/750V 2.5X2C FLAT ACT WH 450/750V 2x2.5mm2 Cu Flat V-90 insulation (Red/white), 3V-90 Model 20200009 450/750V 2.5X2C FLAT BK 450/750V 2x2.5mm2 Cu Flat V-90 Sheath(Black) DATE OF APPROVAL:11 April 2017 Page: (8/ 13) Director of Energy Safety

Model 20200010 450/750V 2.5X2C FLAT BK (UV) 450/750V 2x2.5mm2 Cu Flat V-90 Sheath(Black UV stabilised) Model 20200005 450/750V 2.5X2C 450/750V 2x2.5mm2 Cu Flat V-90 Model 20200003 450/750V 2.5X2C+E FLAT BK 450/750V 2x2.5mm2+2.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(Black) Model 20201111 450/750V 2.5X2C+E WPR2013 Pt2 EE1315 450/750V 2x2.5mm2+2.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(White ) Model 20200011 450/750V 2.5X2C+E NZ DATE OF APPROVAL:11 April 2017 Page: (9/ 13) Director of Energy Safety

450/750V 2x2.5mm2+2.5mm2 Earth (Red/GY/Black), 3V-90 Sheath(White for New Zealand) Model 20204033 450/750V 2.5X3C+E FLAT RWBK/BU AIRCON 450/750V 3x2.5mm2 + 2.5mm2 Flat V- 90 insulation (Red/white/GY/Black), 3V-90 Sheath(Blue) Model 20204034 450/750V 2.5X3C+E FLAT RWBU/BU AIRCON 450/750V 3x2.5mm2 + 2.5mm2 Flat V- 3V-90 Sheath(Blue) Model 20200040 450/750V 2.5X3C+E 450/750V 3x2.5mm2 + 2.5mm2 Flat V- 3V-90 Model 20200015 450/750V 4X2C FLAT ACT WH 450/750V 2x4mm2 Cu Flat V-90 insulation (Red/white), 3V-90 DATE OF APPROVAL:11 April 2017 Page: (10/ 13) Director of Energy Safety

Model 20200014 450/750V 4X2C FLAT WH 450/750V 2x4mm2 Cu Flat V-90 Model 20200016 450/750V 4X2C+E FLAT BK 450/750V 2x4mm2+2.5mm2 Earth Cu 3V-90 Sheath(Black) Model 20200012 450/750V 4X2C+E 450/750V 2x4mm2+2.5mm2 Earth Cu 3V-90 Model 20200019 450/750V 4X2C+E4 XTRA 450/750V 2x4mm2+4mm2 Earth Cu 3V-90 Model 20200370 450/750V 4X3C+E DATE OF APPROVAL:11 April 2017 Page: (11/ 13) Director of Energy Safety

450/750V 3x4mm2 + 2.5mm2 Flat V- 3V-90 Model 20200043 450/750V 4X3C+E 450/750V 3x4mm2 + 2.5mm2 Flat V- 3V-90 Model 20200022 450/750V 6X2C FLAT WH 450/750V 2x6mm2 Cu Flat V-90 Model 20200020 450/750V 6X2C+E 450/750V 2x6mm2+2.5mm2 Earth Cu 3V-90 Model 20200024 450/750V 6X2C+E6 XTRA 450/750V 2x6mm2+ 6mm2 Earth Cu 3V-90 DATE OF APPROVAL:11 April 2017 Page: (12/ 13) Director of Energy Safety

Model 20200371 450/750V 6X3C+E 450/750V 3x6mm2 + 2.5mm2 Flat V- 3V-90 Model 20200046 450/750V 6X3C+E 450/750V 3x6mm2 + 2.5mm2 Flat V- 3V-90 DATE OF APPROVAL:11 April 2017 Page: (13/ 13) Director of Energy Safety