ontents / P.2 Stud terminals.6 Fuse terminals / P.7 Earth conductor isolating terminals.8.1
/ P SK 2.5/EN 2.5 SK 4/EN 4 /Length/height with TS35x7.5 / k/- Gauge to IE 60947-1 / UL94 Flaability class pprovals lamped conductors (H05/H07) 2 conductors with same cross-section (H05/H07) 6.1 x 44.5 x 42.5 41 / 6 0.13...6 800 600 600 550 24 25 25 21 2.5 WG 22...12 WG 26...10 2.5 3 / 2 r # i a 0.5...6 / 0.5...4 0.5...4 / 0.5...4 0.4...0.6 Nm (M 2.5) 10 / 0.6 x 3.5...1.5 6.5 x 42 x 47.5 41 / 6 0.13...6 800 600 600 690 32 30 36 28 4 WG 22...12 WG 26...10 4 4 / 2 r # i a 0.5...6 / 0.5...4 0.5...4 / 0.5...4 0.5...1.0 Nm (M 3) 12 / 0.6 x 3.5 1.5...1.5 0.5...1.5 With twin ferrules ZH 0.5 to ZH 1.5, rated voltage is 690. With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690. SK 2.5/EN 100 0218660000 SK 2.5/EN BL 100 0218680000 SK 4/EN 100 0467460000 SK 4/EN BL 100 0467480000 Screwable cross-connection Switchable link Testing / hecking End plate / Partition plate Small partition over / warning label 2-pole 3-pole 4-pole 10-pole onnecting sleeve Mounting screw Lock washer Switchable link onnecting sleeve Mounting screw Test plug Socket Small partition over / warning label Mounting screw (plastic) Q 2 SK2.5 41 50 0337000000 Q 3 SK2.5 41 50 0337100000 Q 4 SK2.5 41 50 0337200000 Q 10 SK2.5 41 20 0368700000 PS 2.3 RT 5.4 20 0180400000 STB 8.5/5/2.3/M3 SK2.5 50 0280600000 P SK2.5/35 + ST3+4 1.5 20 0460560000 TW SK2.5 2.5 20 0302860000 TW SK2.5 BL 1.5 20 0302880000 TSH 1 2 100 0319160000 D 3 SK2.5 50 0297900000 BFS M3X22 P/RT 100 0128900000 Q 2 SK4 41 50 0336700000 Q 3 SK4 41 50 0336800000 Q 4 SK4 41 50 0336900000 Q 10 SK4 41 20 0368800000 L 2 SK4 32 50 0197000000 BFS M3X25 100 0292500000 PS 2.3 RT 5.4 20 0180400000 STB 14/D5/2.3/M3 SK2.5 50 0168600000 TSH 1 2 100 0319160000 D 4 SK4 50 0285300000 BFS M3X22 P/RT 100 0128900000 Marking systems (see assortment in catalogue 7) Marking tags refer to the section DEK 5/6 DEK 5/6.2
SK 6/EN 6 SK 10/EN 10 SK 16/EN 16 8 x 40 x 47.5 57 / 10 0.33...10 800 600 600 690 41 40 47 36 6 WG 22...8 WG 26...6 6 5 / 2 r # i a 0.5...10 / 0.5...6 0.5...10 / 0.5...6 0.8...1.6 Nm (M 3.5) 12 / 4.0 x 0.8 10 x 41.5 x 47.5 76 / 16 1.5...16 800 600 600 550 57 60 65 50 10 WG 14...6 WG 16...6 10 B6 / 2 r # a 1.5...10 / 1.5...16 1.5...16 / 1.5...10 2.0...4.0 Nm (M 4) 12 / 1.0 x 5.5 12 x 50 x 53.5 76 / 16 2.5...16 1000 600 600 690 76 80 87 66 16 WG 12...4 WG 14...6 16 B6 / 2 r # a 2.5...16 / 4...16 4...16 / 4...16 2.0...4.0 Nm (M 4) 15 / 1.0 x 5.5 For WG 8-7 and WG 8-19, tightening torque is 1.21.4 Nm When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690. Twin wire end ferrules ZH 2.5 - ZH 16 can be used. SK 6/EN 100 0212860000 SK 6/EN BL 100 0212880000 With WG 6 and H07-R10 conductors, an increased MD torque of 1.4 to1.6 Nm should be used. SK 10/EN 100 0337660000 SK 10/EN BL 100 1784410000 higher torque of 2 to 2.4 Nm is necessary when using H07-R16 and WG 6 conductors. SK 16/EN 50 0339760000 SK 16/EN BL 50 1784390000 If QIs are aligned side by side, then a TW/P must be used. Q 2 SK6N 32 50 0456700000 Q 3 SK6N 57 50 0456800000 Q 4 SK6N 57 50 0456900000 Q 10 SK6N 32 20 0457000000 Q 2 SK10 57 50 0457100000 Q 3 SK10 57 50 0457200000 Q 4 SK10 57 50 0457300000 Q 10 SK10 57 20 0457400000 Q 2 SK16 76 50 0457500000 Q 3 SK16 76 50 0457600000 Q 4 SK16 76 50 0457700000 Q 10 SK16 76 20 0457800000 L 2 SK6N/SKT 32 50 0194700000 BFS M3X25 100 0292500000 PS 4 F.STB 4 7.6 20 0299600000 STB 14/D6/4/M3 SK10 50 0169900000 L 2 SK6N/SKT 32 50 0194700000 BFS M3X25 100 0292500000 PS 4 F.STB 4 7.6 20 0299600000 STB 14/D6/4/M3 SK10 50 0169900000 L 2 SK16/SK 57 50 0135800000 BFS M3X25 100 0292500000 PS 4 F.STB 4 7.6 20 0299600000 STB 14/D6/4/M3 SK10 50 0169900000 P SK16 1.5 20 0271160000 P SK16 BL 1.5 20 0271180000 TSH 1 2 100 0319160000 TSH 1 2 100 0319160000 TSH 1 2 100 0319160000 D 4 SK6N 50 0196600000 BFS M3X22 P/RT 100 0128900000 D 4 SK10 50 0178600000 BFS M3X22 P/RT 100 0128900000 D 4 SK16 50 0518200000 BFS M3X22 P/RT 100 0128900000 DEK 5/8 When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690. DEK 5/5 DEK 5/5.3
/ P SK 35/EN 35 DK 4 Q/EN 4 /Length/height with TS35x7.5 / k/- Gauge to IE 60947-1 / UL94 Flaability class pprovals lamped conductors (H05/H07) 2 conductors with same cross-section (H05/H07) 18 x 58 x 63.5 150 / 50 2.5...50 1000 600 600 690 125 115 145 109 35 WG 12...2 WG 12...2 35 B8 / 2 r # i 2.5...16 / 4...50 2.5...35 / 2.5...35 4.0...5.0 Nm (M 6) 18 / 6.5 x 1.2 2.5...16 16 2.5...16 / 2.5...16 6.5 x 54 x 47.5 41 / 6 0.13...6 500 600 600 690 32 30 36 28 4 WG 22...12 WG 26...10 4 4 / 2 0.5...6 / 0.5...4 0.5...4 / 0.5...2.5 0.5...1.0 Nm (M 3) 12 / 0.6 x 3.5 1.5...1.5 0.5...1.5 The tightening torque is 4.5 Nm for 16-50 and WG 6-2/7 stranded conductors. Twin wire end ferrules ZH 2.5 - ZH 16 can be used. With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690. SK 35/EN 20 0339860000 SK 35/EN BL 20 1784400000 It is possible to use twin ferrules with identical rated voltages (LB 13090). DK 4 Q/EN 100 1907040000 DK 4 Q/EN BL 100 1907030000 Screwable cross-connection Switchable link Testing / hecking End plate / Partition plate Small partition over / warning label 2-pole 3-pole 4-pole 10-pole onnecting sleeve Mounting screw Lock washer Switchable link onnecting sleeve Mounting screw Test plug Socket Small partition over / warning label Mounting screw (plastic) QL 2 SK35 99 20 0123600000 QL 3 SK35 99 20 0123700000 QL 4 SK35 99 20 0123800000 QL 10 SK35 99 20 0338600000 H 17/8/5 SK35 50 0267000000 BFS M4X30 50 0267100000 SS M4 D 128-4 100 0136400000 PS 4 F.STB 4 7.6 20 0299600000 STB 16/D7/4/M4 SK35 50 0140200000 P SK35/TW SK16 1.5 10 0303660000 P SK35/TW SK16 BL 1.5 10 0303680000 TW SK35 1.5 20 0304360000 D 4 SK35 50 0178700000 BFS M4X32 P/RT 100 0129100000 Q 2 SK4 41 50 0336700000 Q 3 SK4 41 50 0336800000 Q 4 SK4 41 50 0336900000 Q 10 SK4 41 20 0368800000 L 2 SK4 32 50 0197000000 BFS M3X25 100 0292500000 PS 2.3 RT 5.4 20 0180400000 STB 14/D5/2.3/M3 SK2.5 50 0168600000 TSH 1 2 100 0319160000 D 4 SK4 50 0285300000 BFS M3X22 P/RT 100 0128900000 Marking systems (see assortment in catalogue 7) Marking tags refer to the section DEK 5/5 / SHT 7 If QIs are aligned side by side, then a TW/P must be used. DEK 5/6.4
DK 4 Q/EN 4 6.5 x 54 x 47.5 41 / 6 0.13...6 500 600 600 690 32 30 36 28 4 WG 22...12 WG 26...10 4 4 / 2 0.5...6 / 0.5...4 0.5...4 / 0.5...2.5 0.5...1.0 Nm (M 3) 12 / 0.6 x 3.5 1.5...1.5 0.5...1.5 With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690. DK 4 Q/EN 100 1907020000 Q 2 SK4 41 50 0336700000 Q 3 SK4 41 50 0336800000 Q 4 SK4 41 50 0336900000 Q 10 SK4 41 20 0368800000 L 2 SK4 50 0197000000 BFS M3X25 100 0292500000 PS 2.3 RT 5.4 20 0180400000 STB 14/D5/2.3/M3 SK2.5 50 0168600000 TSH 1 2 100 0319160000 D 4 SK4 50 0285300000 BFS M3X22 P/RT 100 0128900000 DEK 5/6.5
Stud terminals ST 5 Screw thread M5 16 STL 5 Screw thread M5 16 /Length/height with TS35x7.5 16.4 x 54.22 x 47.1 16.4 x 54.22 x 47.1 / Gauge to IE 60947-1 / UL94 Flaability class pprovals lamped conductors (H05/H07) k/- IE UL S 800 600 76 65 16 WG 12...10 / -0 a IE UL S 800 600 76 65 16 WG 12...10 / -0 2 conductors with same cross-section (H05/H07) - - ST 5 P/BE 20 0448360000 STL 5 20 0448460000 End plate / Partition plate Type Qty. Order No. Type Qty. Order No. P ST5 PPO/SW 10 0447240000 P ST5 PPO/SW 10 0447240000 TW ST5 P/BE 10 0477660000 TW ST5 P/BE 10 0477660000 (see assortment in catalogue 7) refer to the section.6
/ P SK 1 With or without LED 4 KDKS 1 m. LED Fuse terminals 4 /Length/height with TS35x7.5 8.1 x 58 x 43 8 x 62.75 x 55.5 / 6.3 / 4 6.3 / 4 0.13...4 0.5...4 Gauge to IE 60947-1 / UL94 Flaability class pprovals lamped conductors (H05/H07) k/- IE UL S 500 6.3 4 WG 22...12 WG 26...12 6 / 3 3 / 2 r # a 0.5...4 0.5...4 / 0.5...4 0.6...0.8 Nm (M 3) 9 / 0.6 x 3.5 IE UL S 500 6.3 4 / 3 3 / 2 # 0.5...4 0.5...4 / 0.5...4 0.5...0.8 Nm (M 3) 9 / 0.6 x 3.5 : max. conductor size = 2.5 when using the cross-connection. Twin wire-end ferrules ZH 0.5 - ZH 2.5 can be used. : max. conductor size = 2.5 when using the cross-connection. 500 /D SK 1/EN 100 0474560000 With LED 230 SK 1/EN LD 1D 230 25 0225760000 KDKS1/EN LD 230 25 8148910000 With LED 230 D SK 1/EN LD 120K 230D 25 0225660000 With LED 115 SK 1/EN LD 1D 115 25 0225560000 KDKS1/EN LD 115 25 8142840000 With LED 115 D SK 1/EN LD 56K 115D 25 0225460000 With LED 60 D SK 1/EN LD 33K 60D 25 0226460000 With LED 48 SK 1/EN LD 1D 48 25 0225360000 KDKS1/EN LD 48 25 8148920000 With LED 48 D SK 1/EN LD 27K 48D 25 0225260000 With LED 24 SK 1/EN LD 1D 24 25 0222860000 KDKS1/EN LD 24 25 8148930000 With LED +- 24 D SK 1/EN LD 15K 24D 25 0222760000 KDKS1/EN LD 24D 25 8146450000 Screwable cross-connection 2-pole QB 2 WI R8 IS 27 50 0461100000 QB 2 WI R8 IS 27 50 0461100000 3-pole QB 3 WI R8 IS 27 50 0461200000 QB 3 WI R8 IS 27 50 0461200000 4-pole QB 4 WI R8 IS 27 50 0461300000 QB 4 WI R8 IS 27 50 0461300000 End plate / Partition plate P SK1 1.5 20 0380360000 P KDKS1 EN 20 9503340000 Marking systems (see assortment in catalogue 7) Marking tags refer to the section DEK 5/8 / SHT 7 DEK 5/8.7
Earth conductor isolating terminals SK 10/EN Neon lamp 10 /Length/height with TS35x7.5 24 x 82 x 61.5 Operating mode / 47 / 10 SK 10 0.5...10 Gauge to IE 60947-1 / UL94 Flaability class pprovals lamped conductors (H05/H07) k/- IE UL S 24 47 10 # 0.5...10 0.5...10 / 0.5...10 1.2...2.2 Nm 12 / / 5 Tightening torque 1.6 Nm for 10 stranded wire. Slide link is closed uxiliary circuit is earthed Display is illuminated green Test position When measuring insulation resistance with voltages greater than UNom, the earth connection must first be disconnected. SK 10 0 24 ~ SK 10/EN 2GL 24U 5 8150150000 230 ~ SK 10/EN 2GL 230 5 8109130000 0 End bracket Type Qty. Order No. Dark Wemid Dark Wemid EWK 1 9 50 0206160000 EW 35 8.5 50 0383560000 Slide link is opened uxiliary circuit is not earthed No earth fault Display illuminated green and red with reduced intensity Disconnected earth connection -> When measuring insulation resistance with voltages greater than UNom, the earth connection must be disconnected. Operational malfunction SK 10 0 Slide link is opened uxiliary circuit is not earthed Earth fault (see assortment in catalogue 7) Display is illuminated red refer to the section with P = 27.8