T50 Telescopic Handlers
T50: the three-in-one special! n Not your average machine With the T50, you get the capabilities and productivity of a Bobcat telescopic handler, skid-steer and articulated loader from one exceptionally versatile machine! Loading tradition in a compact package Only 1.95 m high and 1.83 m wide, the T50 is as compact and manoeuvrable as our skid-steer loaders, with the capacity of a larger machine. Versatility Thanks to our Bob-Tach system, the T50 is compatible with most Bobcat loader attachments. 1 Agile as an articulated loader The 3 steering modes front wheel, 4-wheel or crab-steer let you go anywhere. With the optional boom float, the boom and attachment can smoothly follow uneven surfaces. And the panoramic view from the cab offers 360º visibility, for greater safety and. All the reach of a telescopic handler Lift and load: with the T50, you can lift. tons up to 5. m high. How far do you want to go? With a 1 ton load, the T50 offers a maximum reach of 3 metres.
Compact telescopic loader n Born to load Not a compromise, but a combination. This machine is equipped to tackle all your loading jobs but with greater reach and lifting height than any loader. n Making fast work of tough jobs The T50's optimised 'Z' bar kinematics increases bucket dumping and crowding angles, and improves the bucket thrust when loading. Your overall operation is quicker and the breakout force is optimised. Simultaneous two foot Standard, fully proportional joystick 148 Keep 100% control when loading with one foot on the throttle and one foot on the inching pedal. The inching pedal slows forward movement without changing engine. All movements are proportional and can be combined, thanks to our load sensing system.
Combining comfort and efficiency n 360 visibility For better productivity and safety With the engine located on the side of the machine, the T50 offers 360 visibility from the cab. This design also ensures easier access for routine maintenance. n All the features you need Reinforced undercarriage for greater robustness Attachment Control Device (ACD) for joystick control of certain attachments Creep mode is standard! It enables low travel at high engine rpm, so you always have sufficient hydraulic flow to operate attachments such as sweepers or feeding buckets. n Easy service and greasing Ready access to all key components No special tools required. The operator can the machine in creep mode while maintaining full engine.
Versatile as a Bobcat loader n Flexibility Our quick-attach systems let you switch attachments at a moment s notice. Our manual solutions: Bob-Tach Quick-Tach Optional change attachments without even leaving your cab: Hydraulic Quick-Tach. 1 3 4 5 6 7 8 9 1 Pallet Forks Box Blade Combination Bucket 3 Sweeper 4 Crane Jib 5 Extension Jib 6 Landplane 7 Angle Broom 8 Fork with Grapple 9 Tiller Bale Squeeze Handler Bucket with Grapple Mower Landscape Rake Brushcat Rotary Cutter Bale Spike Trencher Auger Vibratory Roller Dozer Blade Snow Blade Snow V-Blade Scraper Snowblower
T50 Specifications Performance Performance Lifting height (Bob-Tach ) 530 mm Lifting height (Bob-Tach ) 530 mm Lifting height (Quick-Tach) 510 mm Lifting height (Quick-Tach) 510 mm Rated capacity 00 kg Rated capacity 00 kg Capacity at max. height 00 kg Capacity at max. height 00 kg Capacity at max. reach (Bob-Tach ) 1000 kg Capacity at max. reach (Bob-Tach ) 1000 kg Capacity at max. reach (Quick-Tach 950 kg Capacity at max. reach (Quick-Tach) 950 kg Max. reach (Bob-Tach ) 3010 mm Max. reach (Bob-Tach ) 3010 mm Max. reach (Quick-Tach) 3030 mm Max. reach (Quick-Tach) 3030 mm Crowding force 100 dan Crowding force 100 dan Weights Weights Weight (unladen) 4695 kg Weight (unladen) 4695 kg Traction Traction Standard Standard tyres tyres 14x17.5 14x17.5 Low Low (forward (forward/reverse) / reverse) 0 7 7 km/h km/h High High (forward (forward/reverse) / reverse) 0 5 5 km/h km/h Driving Driving modes modes Direct Direct / / soft soft Drive System System Transmission Transmission Hydrostatic Hydrostatic with with electronic electronic regulation regulation Main Main - - hydrostatic hydrostatic motor motor Engine Make Make // Model Model KUBOTA / V3800-DI / V3800-DI Turbo Turbo Fuel Fuel // Cooling Cooling Diesel // Water-cooled Liquid Rated Rated power power (DIN (DIN 671) 671) at 400 at 400 RPM RPM 55.9 55.9 kw kw (75 (75 HP) HP) Maximum torque torque at at 1600 1600 RPM RPM 74 74 Nm Nm Number Number of of cylinders cylinders 4 Displacement 3.8 3.8 ll Hydraulic System Pump type type Gear pump with with LS LS valve valve Combined pump capacity 85 l/min Working pressure 40 bar bar Cycle Times Lift time -- no no load load 4.7 s s Lower time -- no no load load 6.5 s s Telescope in in time time at at max. max. reach reach - no - load no load 4. s s Telescope in in time time at at max. max. height height - no - no load load 4. s s Telescope out out time time at at max. max. reach reach - no - load no load 5.7 s s Telescope out out time time at at max. max. height height - no - no load load 5.8 ss Brakes Engine braking Hydrostatic Parking and and emergency brake brake Negative brake with with hydraulic command Fluid Capacities Axles and reduction gears front front / rear / rear 8.9 // 5.6 5.6 l l Engine oil oil 1 l l Fuel tank 91 l l Hydraulic reservoir (hydraulic / overall) / overall) 9 // 44 44 l l Standard Features Aggravating Movements Arrester (AMA) Quick-Tach Quicktach Hydrostatic transmission Front and rear work lights on on cab cab ROPS/FOPS operator operator cab cab Creep function (or ( or SMS: Speed Management management System) system) Heating, demisting and and ventilation Front and and rear rear washer/wipers Seat Seat with with self self retracting retracting seat seat belt belt Options Back-up Back-up alarm alarm Protective Protective grill grill for for windscreen windscreen Air conditioning Transmission lock override Air Rotating conditioning beacon Transmission Float function lock override Rotating Rear hydraulic beacon auxiliary Float Bob-Tach function Rear Boom hydraulic light auxiliary Bob-Tach Hydraulic line at boom end with ACD Boom Set of light blue lights for hen houses Hydraulic Rear pin-type line at hitch boom end with ACD Set Carriage of blue with lights hydraulic for hen houses attachment lock Hydraulic Boom stop line at boom end with ACD Carriage Roof window with hydraulic wiper attachment lock Boom stop Roof window wiper Load Load Charts Charts With forks and 14 x 17.5 tyres, with Bob-Tach With forks and 14 x 17.5 tyres, with Bob-Tach 4 7 6 4,99 5 4,8 4,99 4,8 4,5 4,5 4,06 4,06 4 3,35 3,35 3 1 0,0 0 m 0,0 4 3 1 0 m 1 7 1000 kg kg,18 1,88 150 kg kg 1500 kg kg 1750 kg kg 1,55 1,36 1,01 000 kg kg 00 kg kg 0,5 0,5 0,7 6 5,5 5,5 5 4 3 0 m 3 1 0 m 1 3,01,75,56,0 1,55 1,36 1,01 1,9 1,71 1,56 Complies Complies with with stability stability test test EN1459 EN1459 Annex Annex B. B. Dimensions (A) (B) (C) (C) (D) (E) (F) E F R G 5330 mm 4145 mm 3984 mm 4000 mm 3585 mm 185 mm 1985 mm L A B C D M K U S 1,06 (G) 148 (I) 1553 mm (J) 430 mm (K) 94 mm N T J I (M) (O) (P) (Q) (R) (S) (T) (U) P Q P Q O 300 mm 860 mm 1485 mm 1840 mm 480 mm 3170 mm mm 1500 mm Specifications and design are subject to change without notice. Pictures of Bobcat products may show other than standard equipment. 009 Bobcat EMEA 447580-EN (09-09) Bobcat EMEA - Drève Richelle 167 - B410 Waterloo, Belgium