Industrial Lifting Equipment Safety Reliability Efficiency Expertise
Lifting ir Winches LIFTSTR Portable Winches - Reliable and Safe Lightweight and compact design Versatile Easy to carry. Robust steel construction. Insensitive to dust and humidity. High efficiency planetary gear box Integrated inside winch drum keeping size to a minimum. :1 design factor. Rated capacity calculated at drum top layer LIFTSTR winch will always lift its rated capacity at any layer of rope. t rated load, its lifting speed is constant at all layers. Reliable gear type air motor etter ability than other motors to accept contaminated air. High starting torque ensuring good spotting capability. Virtually maintenance free and reduced downtime. Precise positioning Variable speed through direct control lever with Lift & Shift system or progressive remote pilot pendent. Increased safety Self adjusting automatic disc brake, fully enclosed for better protection and corrosion resistance Maintenance free. CE models CE compliant models include as standard drum guard, main air emergency stop, overload protection and upper / lower limit switches. LS2-600R-L-CE LS0RGC-L-CE LIFTSTR winches are particularly suitable for use in potentially explosive atmospheres, unlike electric winches. They are classified as standard as Equipment Category 2 for applications in Zone 1 and 2 (s per TEX //CE directive for Surface Industry). TEX Marking: Ex II 2 GD c II 13 C X Specifications at 6.3 bar dynamic pressure (when winch is running) Working pressure range to bar. s per European Standard EN 12-1 Group of mechanism as per FEM 1m / ISO M3. Rated capacity at TOP LYER (kg) LIFTING SPEED T RTED LOD at top rope at lowest rope layer (m/min) layer (m/min) Lifting Ratings at :1 Design Factor LS2-300R LS2-300RGC LS2-600R LS2-600RGC LS-0R LS-0RGC 300 300 600 600 0 0 (1) Measured with recommended rope diameter (see table below). Rated ir consumption Sound pressure as Weight with rated load per EN 12-1 without rope of layers (1) (m 3 /min) d() (kg) 2 2 2 2 2 2 88 6 88 TEX marking Ex II 2 GD c II 13 C X capacity with recommended rope diameter Minimum rope breaking force (kn) Recommended rope diameter (mm) Lifting Ratings at :1 Design Factor LS2-300R LS2-300RGC LS2-600R LS2-600RGC LS-0R LS-0RGC 1 1 30 30 6. 6. Cumulated working rope capacities in meters (2) with RECOMMENDED ROPE DIMETER Layer 1 Layer 2 Layer 3 Layer Layer Layer 6 Layer 12 26 1 2 1 26 8 11 12 188 226 32 8 1 2 66 3 121 21 3 8 1 0 Max. rope storage capacity (m) (2) s per EN 12-1, the working rope capacity leaves a free space of at least 1. times the nominal rope diameter from the top of the drum flanges. 30 8 183 163 2 Industrial Lifting Equipment
How to order LIFTSTR ir Winches To order your winch, specify complete model as shown below: LIFTSTR CE marked models are compliant with the European Machinery Directive 06/2/EC and the European Standard for Power Driven Winches EN 12-1. These models include as standard the following safety features: Drum guard stop with main air shut-off valve as per EN 18 Overload protection Upper / lower limit switches Drum guard and emergency stop CE version) L S 1 0 0 R G C L M P J 1 2 C E LS2-300R LS2-600R LS0R Series and capacity LIFTSTR 300 kg LIFTSTR 600 kg LIFTSTR 1 00 kg s LS2-300R, LS2-300RGC, LS2-600R and LS2-600RGC TEX Compliance No letter = s std - TEX compliance for Group II, Surface Industry M = TEX compliance package for Group I, Mining Industry (on request) - only for LS0R 33 28 1 Drum No letter = Standard GC Long drum 163 ± L PH Control type Lever control lloy pecision PHS pendent PHR Cast iron pecision PHS pendent = 216 = = 28 = Limit switches 2 Control length XM Control length in metres e.g. M (only when with pendent control) (1) For winches used with compressed air temperature above 60 C. (2) s per EN on main load bearing parts. C LS2-300R 1 1 3 LS2-300RGC 311 26 1 LS2-300R-CE 1 1 61 LS2-300RGC-CE 311 26 61 LS2-600R 1 1 3 LS2-600RGC 311 26 1 LS2-600R-CE 1 1 61 LS2-600RGC-CE 311 26 61 s LS0R and LS0RGC Limit switches CE version) Overload protection CE version) Ø 231 x 11 mm Ø 1 Limit switches PHS control (with emergency stop as standard on CE version) 3 1 C C ( Options C Low temp design (- C). G Drum guard. H High Temp. Motor (60 to 8 C) (1) J12 irline filter and lubricator assembly J123 irline filter / regulator / lubricator assembly M 3.1 material traceability certificates (2) P µ marine paint. W Witness test. Specify W1 for S or W2 for DNV or W3 for LRS or W for Client witness of load test. -CE Ingersoll Rand RO Series irline accessories (J123 option). Compliance with the European Machinery Directive (no letter = non CE version). 22 ir inlet 3/ SP Oil level ir inlet 3/ SP Lifting ir Winches C LS0R 180 28 3 LS0RGC 360 28 61 LS0R-CE 180 28 63 LS0RGC-CE 360 28 3 36 32 16 83 83 30 x 13 mm Ø 20 Ø 180 16 C C ( Overload Protection Industrial Lifting Equipment 3
Pulling ir Winches PULLSTR Portable Winches - Reliable and Safe Designed for pulling applications Intended for use on flat horizontal surfaces Free Spooling clutch allows operators to manually position wire rope. 3.:1 design factor. Rated capacity calculated at lowest rope layer, corresponding to the maximum pulling force allowed. Lightweight and compact design Versatile Easy to carry. Robust and all steel construction. Insensitive to dust and humidity. High efficiency planetary gear box Integrated inside winch drum keeping size to a minimum. Reliable gear type air motor etter ability than other motors to accept contaminated air. Virtually maintenance free and reduced downtime. Precise positioning Variable speed through direct control lever with Lift & Shift system or progressive remote pilot pendent. Increased safety Self adjusting automatic disc brake, fully enclosed for better protection and corrosion resistance Maintenance free. CE models CE compliant models include as standard drum guard and main air emergency stop. PS20RGC-L-E PS2-00R-PHM-E PULLSTR winches are particularly suitable for use in potentially explosive atmospheres, unlike electric winches. They are classified as standard as Equipment Category 2 for applications in Zone 1 and 2 (s per TEX //CE directive for Surface Industry). TEX Marking: Ex II 2 GD c II 13 C X. 00 kg 800 600 PS2-00R and PS2-00RGC 6. mm Ø Specifications at 6.3 bar dynamic pressure (when winch is running) Working pressure range to bar s per European Standard EN 12-1 Group of mechanism as per FEM 1m/ISO M3. Pulling force: Lowest/ top layer (kg) Rated ir consump. Sound pressure as Weight / rated load per EN 12-1 wo.rope of layers (1) (m 3 /min) d() (kg) Pulling Ratings at 3.:1 Design Factor PS2-00R PS2-00RGC PS20R PS20RGC 00 / 800 00 / 800 20 / 00 20 / 00 2 2 88 88 38 62 6 (1) Measured with recommended rope diameter (see table below). (2) For PS00RGC, line pulls are reduced by % and line speeds are increased by %. TEX marking ExII2GDcII 13 C X 0 0 3000 20 kg 00 0 00 00 Use area 0 1 2 30 3 Speed in m/min Use area 1st layer th layer PS20R and PS20RGC mm Ø First layer th layer 0 8 12 16 Speed in m/min capacity with recommended rope diameter Minimum rope breaking force (kn) Recommended rope diameter (mm) Pulling Ratings at 3.:1 Design Factor PS2-00R PS2-00RGC PS20R PS20RGC 3 3 8 8 6. 6. Cumulated working rope capacities in meters (2) with RECOMMENDED ROPE DIMETER Layer 1 Layer 2 Layer 3 Layer Layer 32 8 1 2 66 3 121 21 3 8 1 0 Max. rope storage capacity (m) (2) s per EN 12-1, the working rope capacity leaves a free space of at least 1. times the nominal rope diameter from the top of the drum flanges. 8 183 163 Industrial Lifting Equipment
How to order PULLSTR ir Winches To order your winch, specify complete model as shown below: PULLSTR CE marked models are compliant with the European Machinery Directive 06/2/EC and the European Standard for Power Driven Winches EN 12-1. These models include as standard the following safety features: Drum guard stop with main air shut-off valve as per EN 18 Drum clutch all PULLSTR Series) s PS2-00R and PS2-00RGC C PS2-00R 1 1 32 PS2-00RGC 311 26 8 PS2-00R-E 1 1 2 PS2-00RGC-E 311 26 83 Drum guard CE version) 33 28 1 stop CE version) = 216 = = 28 = 2 PHS control (with emergency stop as standard on CE version) Ø 231 Ø 1 x 11 mm 1 C C ( Ingersoll Rand RO Series irline accessories (J123 option). P S 2 0 0 R G C L M P J 1 2 E Series and capacity PS2-00R PULLSTR 1 000 kg PS20R PULLSTR 2 0 kg TEX Compliance No letter = s std - TEX compliance for Group II, Surface Industry M = TEX compliance package for Group I, Mining Industry (on request) - only for PS20R Drum No letter = Standard GC Long drum L PH Control type Lever control lloy pecision PHS pendent PHR Cast iron pecision PHS pendent Control length XM Control length in metres e.g. M (only when with pendent control) (1) For winches used with compressed air temperature above 60 C. (2) s per EN on main load bearing parts. Options C Low temp design (- C). G Drum guard. H High Temp. Motor (60 to 8 C) (1) J12 irline filter and lubricator assembly J123 irline filter / regulator / lubricator assembly M 3.1 material traceability certificates (2) P µ marine paint. W Witness test. Specify W1 for S or W2 for DNV or W3 for LRS or W for Client witness of load test. -E Compliance with the European Machinery Directive (no letter = non CE version). ir inlet 3/ SP Oil level Pulling ir Winches 163 ± 3 22 s PS20R and PS20RGC C PS20R 180 28 0 PS20RGC 360 28 68 PS20R-E 180 28 0 PS20RGC-E 360 28 68 36 32 16 Ø 20 Ø 180 ir inlet 3/ SP 83 83 30 x 13 mm 16 C (all models) Industrial Lifting Equipment
Other Ingersoll Rand Material Handling Products Pneumatic alancers, from 1 to 00 kg - Enclosed Rail Systems Designed to handle virtually all your lifting, suspending and positioning applications up to 00 kg, Ingersoll Rand pneumatic balancers are used throughout global industry because of their outstanding productivity, ergonomics, and value. They are available with 3 different control options. Enclosed rail forms the backbone of any material handling system. Ingersoll Rand offers 3 enclosed rail profiles in lightweight aluminum. ll the accessories, such as hanger kits, end trucks, trolleys, safety cables, and end stops, are provided to construct a complete ceiling supported or freestanding workstation crane system. EW and ZW ir alancers. luminium Enclosed Rails ir Winches, from 1. to tons lifting capacity Setting the standards in winch technology with time savings, space savings and enhanced safety, Ingersoll Rand s line of high quality air winches are known throughout the world for their rugged dependability and quality. These winches can be made in a variety of configurations to suit your most challenging applications. ir and Hydraulic Hoists - Hoist / Trolley Combinations, from 1. to 0 ton capacity The Liftchain LC2 Series is the result of a long experience in heavy load lifting applications in the most difficult and extreme environments around the world. Setting new standards for safety and reliability, the LC2 series is intended for tough industrial applications on offshore oil rigs, shipyards,petrochemical, refineries, foundries, steels mills, mining, tunneling, etc They are available in hook mount version, trolley mount combination and also low headroom trolley mount combination for applications where space is particularly restricted. F Infinity, ton capacity ir Winch, LC2, 2 ton capacity Low Headroom Hoist / Trolley Combination Other Products.O.P. rticulated Handling System, from 2 to 0 ton lifting capacity For over 30 years Ingersoll Rand has designed, manufactured, and serviced hundreds of lowout Preventer Handling Systems for all the major drilling contractors and oil companies in the industry. Our experience with this complex and critical lifting application enables us to provide the type of equipment, engineering support, and certifications that these projects require. S, 2 x 3. ton capacity Hoist / Trolley Combinations Industrial Lifting Equipment 1