Fitness Legacy Zone Rower

Fitness Legacy Zone Rower PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 1560x1325x915mm 14 to Adult <900mm Approx 144Kg Approx 195Kg SPECIFICATION Solid steel components to EN 10087:1998 Stainless steel components to EN 10088-2: 2005 Steel plate to EN 10025-2:2004 Steel CHS to EN 10255-2:2004 Welding to EN ISO 14341:2011 HDPE to EN ISO 14632: 1998 Polyester powder paint to EN 13438:2005 Standard fixings to BS 3692:2001 and BS 4190:2001 Non-standard fixings are anti-vandal and corrosion resistant INSTALLATION INSTRUCTIONS 1 Read installation instructions thoroughly before commencing installation of unit. 2 Excavate two holes 600 x 600 x 600 deep - see page 2. 3 Position and assemble the below ground fixing with spragging irons (see page 2) centrally in the excavated holes so the eight bolts are pointing upwards ensuring that the top plate is flush with the finished surface level. 4 Check alignment of bolts, backfill the holes with concrete (0.41 cu Metres) (4 parts gravel, 2 parts sand & 1 part cement) ensuring that the below ground fixing is perpendicular to the finished surface level. 5 Allow the concrete to set for 48 hours. 6 Position the unit on the below ground fixing and fit using one M20 washer and two M20 nuts per bolt as shown on page 3. Ensure unit is perpendicular to the ground surface. 7 Ensure all moving parts move freely without obstruction. If all parts are functioning correctly cover the base of the unit with the two halves of the Base Castings and fasten with two M10 x 30 Pent button head screws. Note Use Installation Aid (3720-185) for Below Ground Fixing. Note Ensure all installation aids are removed before first use. Page 1 of 11

Below Ground Fixing Details (2 off) 15 24 TYP 13 Foundation Detail (Care must be taken in abnormal conditions) 300 1570 970 Ctrs 600 600 (90) 300 600 FSL Concrete Spragging Irons FSL = Finished Surface Level Page 2 of 11

Rower to Below Ground Fixing Details 26 26 25 26 26 25 16 19 19 16 Foundations omitted for clarity Page 3 of 11

Minimum and Training Spaces 1630 4400 (970) Base Fixing 1800 1501 Min Training Space 853 3600 1800 R1500 Minimum Space R1000 Training Space (85) 400 485 2400 Page 4 of 11

Safety Surfacing Wetpour 3510 (970) 1465 1075 9.0 Sq. Metres 40mm Wetpour 11.0 Linear Metres Wetpour Edging 3075 1537.5 R1500 Rear Front (Foot End) 4500 Grass Mats (1500 x 1000mm) 1700 (970) 1330 11 off Total 2000 Front (Foot End) 4000 Rear Safety Tiles (1000 x 1000mm) 4000 (970) 1750 1280 10.0 Sq. Metres 40mm Thickness 12.0 Linear Metres of Tile Edging 1500 Rear Front (Foot End) 3000 Page 5 of 11

Fixing Details for Maintenance Seat Frame Assembly 2.20 2.23* 2.16 2.21 2.9 2.2 2.6 2.22* 2.15 2.8 2.1 2.10 2.10 2.7 2.3 15mm Panel 2.16 2.17 12.5mm Panel 15mm Panel 2.4 2.23* Handle and Pivot Arm Assembly 12.5mm Panel 2.18 2.10 2.8 2.16 2.23* 3.2 3.10 3.8 3.6 3.9 3.11 3.7 3.7 3.6 3.11 3.13 3.14* 3.5 3.12 3.4 3.1 4.3 7 10 * = For use with 12.5mm Standard Colour Panel (See Page 11) 4.2 4.1 30 29 Page 6 of 11

Fixing Details for Maintenance Handle/Pivot Arm Assembly to Seat Frame Assembly 29 11 2 30 3 30 29 7 4 11 Rear Arm Assembly Front Arm Assembly 5.1 5.2 5.3 6.1 6.2 6.3 5.2 6.2 5.3 6.3 Page 7 of 11

Fixing Details for Maintenance Arm Assembly to Rower Frame and Seat Frame Assembly 19 9 12 6 Note:- Plates to be on inside (4 Places) 6 29 10 30 5 8 30 5 1 10 29 12 9 19 Page 8 of 11

Parts List ITEM QTY PART NUMBER DESCRIPTION 1 1 4202-113 Rower Frame W.A. 2 1 4202-116 Seat Frame Assembly 2.1 1 4202-117 Seat Frame W.A. 2.2 2 3711-073 Foot Cast Iron 2.3 1 3755-750 Side Panel - LH 2.4 1 3755-751 Side Panel - RH 2.6 1 4202-121 Front Panel Assembly 2.7 2 2171-083 M8 x 16 SKT HD CAP SCREW 2.8 6 2176-151 M8 x 16 Pent Button Head 2.9 4 2176-226 M8 x 20 LG PENT C'SK SCREW 2.10 8 2212-214 M8 NORD LOCK WASHER 2.15 2 2611-031_Cup Black Poepplemann Cup 2.16 8 2611-031_Cap Black Poepplemann Cap 2.17 1 3755-849 Side Panel - LH (12.5mm Panel) 2.18 1 3755-852 Side Panel - RH (12.5mm Panel) 2.19 1 4202-280 Front Panel Assembly (12.5mm Panel) 2.20 1 3755-752 Seat Panel 2.21 2 2171-185 M10 x 35 C'sunk Skt Screw c/w Pin 2.22 2 2611-033_Cup Green Poeppelmann Cup 2.23 8 2611-033_Cap Green Poepplemann Cap 3 1 4202-108 Handle Assembly 3.1 1 4202-109 Handle W.A. 3.2 2 3730-161 Handle 3.4 2 2541-105 BALL BEARING Ø52 x Ø25 x 15 3.5 2 2441-007 Spiral Ring - Internal 52 Dia 3.6 2 2906-023 Small Buffer (Top) 3.7 2 2906-024 Small Buffer (Bottom) 3.8 1 2171-012 M8 x 50 SKT CAP HD SCREW 3.9 2 2185-021 M8 x 35 Hex Head Bolt 3.10 2 2212-214 M8 NORD LOCK WASHER 3.11 2 2215-507 M8 Washer 3.12 1 2191-009 M8 Binx Nut 3.13 2 2611-031_Cap Black Poepplemann Cap 3.14 2 2611-033_Cap Green Poepplemann Cap Parts List Continued on Page 10 Page 9 of 11

Parts List ITEM QTY PART NUMBER DESCRIPTION 4 1 4202-112 Pivot Arm Assembly 4.1 1 4202-132 Pivot Arm W.A. 4.2 4 2541-105 BALL BEARING Ø52 x Ø25 x 15 4.3 4 2441-007 Spiral Ring - Internal 52 Dia 5 2 4202-111 Rear Arm Assembly 5.1 1 4202-131 Rear Arm W.A. 5.2 4 2541-105 BALL BEARING Ø52 x Ø25 x 15 5.3 4 2441-007 Spiral Ring - Internal 52 Dia 6 2 4202-110 Front Arm Assembly 6.1 1 4202-130 Front Arm W.A. 6.2 4 2541-105 BALL BEARING Ø52 x Ø25 x 15 6.3 4 2441-007 Spiral Ring - Internal 52 Dia 7 2 3033-150 Spindle 8 1 3033-151 Spindle 9 8 3730-144 Bearing Cover -Skier 10 4 3730-163 Bearing Cover 11 2 3730-164 Bearing Cover 12 8 2441-008 Spiral Ring - External 25 Dia 13 2 5071-031 BELOW GROUND FIXING 15 4 3030-310 460mm Spragging Iron 16 4 2001O-009 BASE CASTING 19 12 2176-132 M10 x 30 Pent Button Head 24 8 2185-582 M20 x 100 HT HEX HD BOLT 25 8 2215-512 M20 WASHER 2mm THK 26 16 2193-011 M20 Nut 29 6 2176-152 M8 x 25 Pent Button Head 30 6 2441-014 External Circlip Ø25mm Parts List Continued on Page 11 Page 10 of 11

Front Panel HDPE Colour Options 3755-753 Orange/Black/Orange - 15mm Thick 3755-853 Yellow/Black/Yellow - 15mm Thick 3755-854 Green/Black/Green - 15mm Thick 3755-855 Beige/Green/Beige - 12.5mm Thick Note:- all panels require inserts. LH Side Panels HDPE Colour Options 3755-750 Orange/Black/Orange - 15mm Thick 3755-847 Yellow/Black/Yellow - 15mm Thick 3755-848 Green/Black/Green - 15mm Thick 3755-849 Beige/Green/Beige - 12.5mm Thick RH Side Panels HDPE Colour Options 3755-751 Orange/Black/Orange - 15mm Thick 3755-850 Yellow/Black/Yellow - 15mm Thick 3755-851 Green/Black/Green - 15mm Thick 3755-852 Beige/Green/Beige - 12.5mm Thick COMPILED MC DATE: 05/11/13 REV ECN SIG. DATE: 0 1685 1 Minor MC MC 07/05/14 23/06/14 2 Minor MC 18/08/14 3 Minor MC 15/10/14 4 Minor MC 03/12/14 5 Minor MC 25/08/15 6 Minor MC 16/09/15 7 8 Minor Minor MC 13/10/15 MC 01/02/17 Page 11 of 11

DESPATCH LIST Sheet 1 of 2 Product: Rower - Fitness Legacy Zone Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked Items marked * to be fitted before despatch 1 2 2 BGF upright 5071-031 3 1 Rower frame welded assy * 4202-113 4 1 Seat Frame Welded Assembly * 4202-117 5 1 Handle Welded Assembly * 4202-109 6 2 Front Arm Welded Assembly * 4202-130 7 2 Rear Arm Welded Assembly * 4202-131 8 1 Pivot Arm Welded Assembly * 4202-132 9 1 Side Panel - LH (Orange/Black/Orange - 15mm)* 3755-750 10 1 Side Panel - RH (Orange/Black/Orange - 15mm)* 3755-751 11 1 Seat Panel (Grey Smooth - Polydek - 15mm)* 3755-752 12 1 Front Panel (Orange/Black/Orange - 15mm)* 3755-753 13 4 Base casting 2001O-009 14 2 Foot Cast Iron * 3711-073 15 1 Fitness Instruction Label (Rower) * 2910-021 16 1 Fixing pack Alternative Side Panel - LH Colour Options 9A 1 Side Panel - LH (Yellow/Black/Yellow - 15mm)* 3755-847 9B 1 Side Panel - LH (Green/Black/Green - 15mm)* 3755-848 9C 1 Side Panel - LH (Beige/Green/Beige - 12.5mm)* 3755-849 Total No. of Items Picked By: Checked By: COMPILED REV 0 1 2 3 BY: MC ECN No. 1685 Minor Minor Minor DATE 28/02/2014 06/05/2014 29/09/2014 03/12/2014 DATE: 28/02/14 SIGN MC MC MC MC

DESPATCH LIST Sheet 2 of 2 Product: Rower - Fitness Legacy Zone Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked Items marked * to be fitted before despatch Alternative Side Panel - RH Colour Options 10A 1 Side Panel - RH (Yellow/Black/Yellow - 15mm)* 3755-850 10B 1 Side Panel - RH (Green/Black/Green - 15mm)* 3755-851 10C 1 Side Panel - RH (Beige/Green/Beige - 12.5mm)* 3755-852 Alternative Front Panel Colour Options 12A 1 Front Panel (Yellow/Black/Yellow - 15mm)* 3755-853 12B 1 Front Panel (Green/Black/Green - 15mm)* 3755-854 12C 1 Front Panel (Beige/Green/Beige - 12.5mm)* 3755-855 Total No. of Items Picked By: Checked By: COMPILED REV 0 1 2 3 BY: MC ECN No. 1685 Minor Minor Minor DATE 28/02/2014 06/05/2014 29/09/2014 03/12/2014 DATE: 28/02/14 SIGN MC MC MC MC

FIXINGS LIST Sheet 1 of 2 Product: Rower - Fitness Legacy Zone (For 15mm Thick Panels) Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked 1 22 Ball bearing dia 52 x dia 25 x 15 * 2541-105 2 22 Spiral ring - internal 52 dia * 2441-007 3 8 Spiral ring - external 25 dia * 2441-008 4 2 Spindle * 3033-150 5 1 Spindle * 3033-151 6 8 Bearing Cover * 3730-144 7 4 Bearing Cover * 3730-163 8 2 Bearing Cover * 3730-164 9 2 Small Buffer (Top) * 2906-023 10 2 Small Buffer (Bottom) * 2906-024 11 12 2 Handle * 3730-161 13 2 M8 x 16 LG SOCKET HEAD CAP SCREW * 2171-083 14 10 Black Poeppelmann cap * 2611-031 15 2 Black Poeppelmann cup * 2611-031 16 4 Spragging iron 460mm lg 3030-310 17 18 6 M8 x 16 Pent Button Head * 2176-151 19 4 M8 x 20 LG PENT C'SK SCREW * 2176-226 20 2 M8 x 35 Hex Head Bolt * 2185-021 21 1 M8 x 50 SKT CAP HD SCREW * 2171-012 22 2 M8 washer * 2215-507 23 10 M8 NORD LOCK WASHER * 2212-214 24 1 M8 Binx Nut * 2191-009 Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 6 7 BY: MC ECN No. Minor Minor DATE 28/09/2015 01/02/2017 DATE: 28/02/14 SIGN MC MC

FIXINGS LIST Sheet 2 of 2 Product: Rower - Fitness Legacy Zone (For 15mm Thick Panels) Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked 25 2 M8 Tee Nut insert * 2115-014 26 2 M10 x 35 C'sunk Hex Skt Screw c/w pin * 2171-185 27 28 29 30 12 M10 x 30 pent button head screw (8 off *) 2176-132 31 32 33 34 8 M20 x 100 HT hex head bolt 2185-582 35 8 M20 washer 2215-512 36 16 M20 nut 2193-011 37 1 M10 pent key 2372-008 38 39 40 2 Dia 1/8" x 5/8" Lg Sellok Pin * 2223-023 41 6 M8 x 25 Pent Button Head * 2176-152 42 6 External Circlip Ø25mm * 2441-014 Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 6 7 BY: MC ECN No. Minor Minor DATE 28/09/2015 01/02/2017 DATE: 28/02/14 SIGN MC MC

FIXINGS LIST Sheet 1 of 2 Product: Rower - Fitness Legacy Zone (For 12.5mm Thick Panels) Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked 1 22 Ball bearing dia 52 x dia 25 x 15 * 2541-105 2 22 Spiral ring - internal 52 dia * 2441-007 3 8 Spiral ring - external 25 dia * 2441-008 4 2 Spindle * 3033-150 5 1 Spindle * 3033-151 6 8 Bearing Cover * 3730-144 7 4 Bearing Cover * 3730-163 8 2 Bearing Cover * 3730-164 9 2 Small Buffer (Top) * 2906-023 10 2 Small Buffer (Bottom) * 2906-024 11 12 2 Handle * 3730-161 13 14 10 Green Poeppelmann cap * 2611-033 15 2 Green Poeppelmann cup * 2611-033 16 4 Spragging iron 460mm lg 3030-310 17 18 6 M8 x 16 Pent Button Head * 2176-151 19 4 M8 x 20 LG PENT C'SK SCREW * 2176-226 20 2 M8 x 35 Hex Head Bolt * 2185-021 21 1 M8 x 50 SKT CAP HD SCREW * 2171-012 22 2 M8 washer * 2215-507 23 10 M8 NORD LOCK WASHER * 2212-214 24 1 M8 Binx Nut * 2191-009 Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 6 7 BY: MC ECN No. Minor Minor DATE 28/09/2015 01/02/2017 DATE: 28/02/14 SIGN MC MC

FIXINGS LIST Sheet 2 of 2 Product: Rower - Fitness Legacy Zone (For 12.5mm Thick Panels) Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked 25 2 M8 Tee Nut insert * 2115-014 26 27 2 M10 x 35 C'sunk Hex Skt Screw c/w pin * 2171-185 28 2 M8 x 16 LG SOCKET HEAD CAP SCREW * 2171-083 29 30 31 12 M10 x 30 pent button head screw (8 off *) 2176-132 32 33 34 35 8 M20 x 100 HT hex head bolt 2185-582 36 8 M20 washer 2215-512 37 16 M20 nut 2193-011 38 1 M10 pent key 2372-008 39 40 2 Dia 1/8" x 5/8" Lg Sellok Pin * 2223-023 41 6 M8 x 25 Pent Button Head * 2176-152 42 6 External Circlip Ø25mm * 2441-014 Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 6 7 BY: MC ECN No. Minor Minor DATE 28/09/2015 01/02/2017 DATE: 28/02/14 SIGN MC MC