DCG Commercial. 7½ - 12½ Ton Packaged Gas/ Electric Up to 11.3 EER / 80% T.E.

Similar documents
DCG Commercial. 7½ - 12½ Ton Packaged Gas/ Electric Up to 11.3 EER / 80% T.E.

DCH Commercial Contents Standard Features Cabinet Features

DCC Commercial. 7½ - 12½ Ton Packaged Air Conditioners Up to 11.3 EER. Cooling Capacity: 88, ,000 BTU/h

DTC Commercial. 3-5 Tons Packaged Air Conditioner Up to 15.5 SEER / Up to 13.0 EER. Cooling Capacity: 35,600 60,000 BTU/h

DSC Commercial. 3-5 Ton Packaged Air Conditioner 14 SEER / Up to 12.0 EER. Cooling Capacity: 35,000 58,000 BTU/h

DSC Commercial. 3-5 Ton Packaged Air Conditioner 14 SEER / Up to 12.0 EER. Cooling Capacity: 35,000 58,000 BTU/h

DSG Commercial. 3-5 Ton Packaged Gas/ Electric Units 14 SEER / up to 12.0 EER Up to 81% Efficient

CPG Commercial. 7½- to 12½-Ton Self-Contained Packaged 80% AFUE. Cooling Capacity: 90, ,000 BTU/h. Gas/Electric Units. up to 11.

DCC Commercial. 3- to 6-Ton Packaged Air Conditioner. Cooling Capacity: 34,600 71,000 BTU/h

DCH Commercial. 3- to 6-Ton, Three-Phase Packaged Heat Pumps. Cooling Capacity: 35,000 70,000 BTU/h Heating Capacity: 34,600 70,000 BTU/h

CPC Commercial. 15- & 20-Ton, Three-Phase Packaged Air Conditioner. 20-Ton Cooling Capacity: 240,000 BTU/h

DCG Commercial. 3- to 6-ton Packaged Gas/Electric Units. Cooling Capacity: 34,600 71,000 BTU/h Heating Capacity: 36, ,400 BTU/h

DTG Commercial. 3-5 Tons Gas/ Electric Units Up to 15.5 SEER and 13.0 EER Up to 81% AFUE

CPH Commercial. 7½- to 12½-Ton Self-Contained. Packaged Heat Pump. Cooling / Heating Capacities: up to 11.5 EER up to 3.5 COP. 90, ,000 BTU/h

CPH COMMERCIAL 7½- TO 10-TON SELF-CONTAINED PACKAGED HEAT PUMP

DP15CH. Packaged Air Conditioner UP TO 15 SEER 2 to 5 Tons. Cooling Capacity: 23,600-57,500 BTU/h

CPC Commercial. 7½- to 12½-Ton Three-Phase. up to 11.5 EER. Cooling Capacity: 90, ,000 BTU/h. Packaged Air Conditioners

High-quality UV-resistant powder-paint finish aluminized steel tubular heat exchanger

DP14GM. Packaged Gas / Electric 14 SEER / 81% AFUE 2 to 5 Tons. Cooling Capacity: 23,000 57,500 BTU/h Heating Capacity: 40, ,000 BTU/h

3- to 6-Ton. 13 SEER / up to 11.3 EER & 7.7 HSPF. Packaged Heat Pump. Heating Capacity: 34,600 70,000 BTU/h. Cooling Capacity: 35,000 70,000 BTU/h

GPH13H. Packaged Heat Pump. 13 SEER / R-410A 2 to 5 Tons. Cooling Capacity: 24,000-57,500 BTU/h Heating Capacity: 22,000-54,500 BTU/h

DX13S Commercial. 3-, 4-, & 5-Ton, Three-Phase Split System Air Conditioner. Cooling Capacity: 36,000-60,000 BTU/h

CPG COMMERCIAL 5-TON SELF-CONTAINED PACKAGED GAS/ELECTRIC UNIT

CPG COMMERCIAL 4-TON SELF-CONTAINED PACKAGED GAS/ELECTRIC UNIT

CPG COMMERCIAL 10-TON SELF-CONTAINED PACKAGED GAS/ELECTRIC UNITS

GPC13H. 2- to 5-Ton Packaged Air Conditioner 13 SEER / R-410A. Cooling Capacity: 24,000-59,000 BTU/h

GPG14M. 2- to 5-Ton Packaged Gas/Electric Units 14 SEER / 81% AFUE

DX11S Commercial & 10-ton, Three-Phase Split System Air Conditioner 11.2 EER / R-410A. Plus

DX13S Commercial. 3-, 4-, & 5-Ton, Three-Phase. Cooling Capacity: 36,000-60,000 BTU/h

DCC Commercial. 15- & 20-Ton, Three-Phase. 15 Tons Cooling Capacity: 180,000 BTU/h 20 Tons Cooling Capacity: 240,000 BTU/h. Packaged Air Conditioners

GPH13M. 13 SEER / R-410A 2 to 5 Tons

DP14HM Commercial 3-5 TON THREE-PHASE PACKAGED HEAT PUMPS 14 SEER. Cooling Capacity: 34,400-58,000 BTU/h Heating Capacity: 33,200-57,000 BTU/h

Packaged Gas/Electric. Cooling Capacity: 23,000 57,500 BTU/h

DZ11S Commercial. Plus & 10-Ton, Three-Phase Split System Heat Pump with One Two-Speed Indoor Air Handler and Two 4-Ton or Two 5-Ton Condensers

GSX SEER / 1½ to 5 Tons. Split System Air Conditioner. 18,000-60,000 BTU/h

DCG Commercial. 7½- to 10-Ton Three-Phase Packaged Gas/ Electric. Cooling Capacity: 88, ,000 BTU/h Heating Capacity (Output): 144,000 BTU/h

DP13CM. Packaged Air Conditioner 3, 4, & 5 Tons / 13 SEER. Cooling Capacity: 36,000-56,000 BTU/h

GPC13M R-410A, 13 SEER. Packaged Air Conditioner. 3, 4, & 5 Tons. Cooling Capacity: 36,000-56,000 BTU/h

Split System. GSC13: 3-5 Tons GSC10: 7½ & 10 Tons. Air Conditioner

DZ11TA Commercial. 7 ½ & 10-Ton, Three-Phase Split System Heat Pump 11 EER/ IEER /3.3 COP/R-410A

DX18TC. High-Efficiency, ComfortNet -Compatible, Split System Air Conditioner Up to 19 SEER. Cooling Capacity: 34,600-58,000 BTU/h

GPC14H. 2- to 5-Ton Packaged Air Conditioner 14 SEER. Cooling Capacity: 24,000-57,500 BTU/H

GPC14H 2- to 5-Ton Packaged Air Conditioner Up to 14 SEER

GSZ16. High-Efficiency Split System Heat Pump Up to 16 SEER & 9.0 HSPF 1½ to 5 Tons

DSXC18. Split System Air Conditioner. 34,000-56,000 BTU/h

DCC Commercial Tons Packaged Air Conditioners

GPC14M. Packaged Air Conditioner 2 through 5 Tons / 14 SEER. Cooling Capacity: 23,000-56,000 BTU/h

GPG15 Series 80% AFUE. Single-Phase, Self-Contained. up to 15 SEER. Cooling Capacity: 23,200 56,500 BTU/h. Heating Capacity: 69, ,000 BTU/h

ASXC18. High-Efficiency, ComfortNet -Compatible, Split-System Air Conditioner Up to 19 SEER. Cooling Capacity: 24,000-60,000 BTU/h

DZ11S Commercial & 10-Ton, Three-Phase

SSX16 PRODUCT SPECIFICATIONS 16 SEER / R-410A 2 TO 5 TONS HIGH-EFFICIENCY SPLIT SYSTEM AIR CONDITIONER COOLING CAPACITY 24,000 BTU/H TO 57,000 BTU/H

GPG COMMERCIAL PRODUCT SPECIFICATIONS 13 & 10 SEER 80% AFUE 3, 4, & 5 TON, 3-PHASE SELF-CONTAINED PACKAGED GAS/ELECTRIC

2- to 5-Ton. Cooling Capacities: 23,600 to 57,000 BTU/h. Packaged Gas/Electric Units. Heating Capacities: 46,000 to 138,000 BTU/h

APD14. Packaged Dual-Fuel Units Up to 14.5 SEER 81% AFUE / 8.0 HSPF

DZ13SA. Split-System heat pump. Cooling Capacity: 17,400-55,000 BTU/h Heating Capacity: 15,200-59,000 BTU/h

DZ14SA. Energy-Efficient Split System Heat Pump Up to 15 SEER & 9.0 HSPF. Cooling Capacity: 18,000-60,000 BTU/h Heating Capacity: 18,000-60,000 BTU/h

GPH13H PRODUCT SPECIFICATIONS 13 SEER PACKAGED HEAT PUMP 2 TO 5 TONS COOLING CAPACITY: 25,000-57,000 BTU/H HEATING CAPACITY: 24,000-54,400 BTU/H

GSZ13. Energy-Efficient Split System Heat Pump 1½ to 5 Tons. Cooling Capacity: 17,400 to 57,000 BTU/h Heating Capacity: 17,000 to 58,000 BTU/h

DX11S Commercial & 10-Ton, Three-Phase. Cooling Capacity: 88, ,000 BTU/h

GSC13 Split System Air Conditioner

GPC13M COMMERCIAL PRODUCT SPECIFICATIONS 13 SEER PACKAGED AIR CONDITIONER 3- TO 5-TON COOLING CAPACITY 35,000-56,000 BTU/H

SSZ14. High-Efficiency. Split System Heat Pump. Cooling Capacity: 18,000 to 57,600 BTU/h. Up to 15 SEER & 8.5 HSPF

GSZ14. High-Efficiency, R-410A 1½ to 5 Tons. up to 14 SEER

DCG Series. Submittal Data Form. 7½ - 12½ Ton Packaged Gas/ Electric Up to 11.3 EER / 80% AFUE

ASZ13 13 SEER / R-410A. Heating Capacity: 18,000-59,000 BTU/h

DSZC16. Split System Heat Pump Up to 16 SEER & 9.5 HSPF. Cooling Capacity: 24,000-60,000 BTU/h Heating Capacity: 24,000-60,000 BTU/h

DZ14S Commercial 3-5 TON, THREE-PHASE SPLIT SYSTEM HEAT PUMP 14 SEER / R-410A

Q6SP Series Rev A TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 7.5 and 10 Ton Packaged Electric Heat Pump Units with R-410A 11.

SSZ 14 SEER Split System Heat Pumps

SSX14 PRODUCT SPECIFICATIONS 14 SEER / R-410A HIGH-EFFICIENCY SPLIT SYSTEM AIR CONDITIONER 1½- TO 5-TON COOLING CAPACITY 18,000 TO 56,800 BTU/H

R6GP Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 6, 7½ and 10 Ton Packaged Gas/Electric Units, with R-410A WARRANTY

Q6SP Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 7.5 and 10 Ton Packaged Electric Heat Pump Units with R-410A 11.

TECHNICAL MANUAL. *SZC 16 SEER Split System Heat Pumps

P6SP Series Rev A TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 6, 7½ and 10 Ton Packaged Electric Cooling Units EER Commercial System Units

SSZ14 PRODUCT SPECIFICATIONS 14 SEER HIGH-EFFICIENCY, R-410A SPLIT SYSTEM HEAT PUMP 1½ TO 5 TON

DCG Commercial. 15- & 20-Ton, Three-Phase

PHB SERIES 7-1/2 and 10 TON

DCG Commercial Tons Packaged Gas / Electric Units

Cabinet Features Heavy-gauge, galvanized-steel cabinet with UV-resistant powder-paint finish Full Perimeter Rail Sloped drain pan

GSZ/VSZ 13 SEER Split System Heat Pumps

GPG13 SINGLE-PHASE, SELF-CONTAINED

Q6SP Series Rev A TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 7.5 and 10 Ton Packaged Electric Heat Pump Units 11.0 EER

AVXC20. High-Efficiency, Comfortnet-Compatible, Variable-Speed, Inverter Drive Split System Air Conditioner. Cooling Capacity : 23,600 53,000 BTU/h

TECHNICAL INFORMATION MANUAL

PHR5. Product Specifications

GPH 13 H SERIES HORIZONTAL Package Heat Pump Units with R-410A

PHF SERIES THREE PHASE CONVERTIBLE SINGLE PACKAGE HEAT PUMP

S5BP Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS

TECHNICAL GUIDE GENERAL SPECIFICATIONS COMMERCIAL SPLIT-SYSTEM COOLING UNITS FOUR PIPE SYSTEM OUTDOOR UNIT:

TECHNICAL MANUAL. *PC 14 SEER R-410A Package Air Conditioners with R-410A

DP14GM Commercial 14 SEER / 81% AFUE 3-5 TON, THREE-PHASE PACKAGED GAS/ELECTRIC. Cooling Capacities: 34,200 to 57,000 BTU/h

GPC 14 SEER R-410A Package Air Conditioners with R-410A

PGC COMMERCIAL PACKAGED GAS/ELECTRIC

R6GN Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Gas/Electric Units with R-410A WARRANTY

PHF SERIES. THREE PHASE 50 Hz OPERATION CONVERTIBLE SINGLE PACKAGE HEAT PUMP

SSZ 16 SEER Split System Heat Pumps

RGMA Series Package Gas Electric SPECIFICATIONS

14 SEER R -410A PACKAGE GAS / ELECTRIC UNIT 2 to 5 TON

GR4GN Series TECHNICAL SPECIFICATIONS. Single Packaged Gas/Electric Units. GR4GN 10.1 EER Commercial System 7½ and 10 Ton Units FEATURES AND BENEFITS

TECHNICAL INFORMATION MANUAL

Transcription:

DG ommercial 7½ - ½ Ton Packaged Gas/ Electric Up to. EER / 0% T.E. ooling apacity:,000,000 BTU/h Heating apacity (Output):,000 BTU/h ontents Nomenclature... Product Specifications... Expanded ooling Data... Airflow Data... rankcase Heater... 0 Electrical Data... Dimensions... Wiring Diagrams... 7 for Models with DD ontrols... Accessories... 7 Standard eatures TuffTube tubular heat exchanger High-efficiency scroll compressors Two-stage heating and cooling (7. - 0 Ton) opper tube / aluminum fin coils Micro-hannel Indoor & Outdoor oils (. Ton) Power block for field wiring High-capacity, steel-cased filter drier Single-point entry -volt terminal strip onvertible airflow orientation Built-in filter rack with standard " filters omplies with alifornia Low NOx emissions standards Units meet the performance outlined in Table..- of ASHRAE Standard 90.-0 AHRI ertified; ETL Listed abinet eatures Heavy-gauge, galvanized-steel cabinet with UV-resistant powder-paint finish ull perimeter rail Sloped drain pan Easy to service * omplete warranty details available from your local dealer or at www.daikincomfort.com. SS-DG7 www.daikinac.com /7 Supersedes /7

Nomenclature D G 09 0 B * * * A *,, 7,,9 0 Revision Levels Major & Minor Brand actory-installed Options D Daikin X No Options A Non-powered convenience outlet onfiguration B Powered convenience outlet Standard Efficiency ( - Tons) Low-ambient kit S Standard Efficiency ( - Tons) D Return air smoke detector T High Efficiency ( - Tons) E Supply air smoke detector Non-powered convenience outlet; Application Low-ambient kit ooling G Non-powered convenience outlet; G Gas Heat Return air smoke detector H Heat Pump H Non-powered convenience outlet; Supply air smoke detector Nominal ooling apacity J Non-powered convenience outlet; 0 Tons 0 ½ Tons 00 Tons Return & Supply air smoke detectors 0 Tons 0 0 Tons K Non-powered convenience outlet; 00 Tons 0 ½ tons Low-ambient kit; Supply air smoke detector 07 Tons 0 Tons L Non-powered convenience outlet; 090 7½ Tons 0 0 Tons Low-ambient kit Return & Supply air smoke detectors Nominal Heating apacity M Powered convenience outlet; Gas/Electric A/ H/P actory-installed Electric Heat Low-ambient kit 0,000 BTU/h XXX No Heat N Powered convenience outlet; 090 90,000 BTU/h 00 0 kw 00 0 kw Return air smoke detector,000 BTU/h 0 kw 0 0 kw O Powered convenience outlet; 0 0,000 BTU/h 0 kw 0 kw Return & Supply air smoke detectors 0 0,000 BTU/h 0 kw 0 kw P Powered convenience outlet; 0 0,000 BTU/h 00 0 kw 00 0 kw Supply air smoke detector 00 00,000 BTU/h 0 kw Q Powered convenience outlet; Low-ambient See product specifications for heat size(s) available for each capacity. kit; Return air smoke detector R Powered convenience outlet; Low-ambient Voltage kit; Supply air smoke detector 0-0//0 0//0 T Powered convenience outlet; Low-ambient 0-0//0 7 7//0 kit; Return & Supply air smoke detectors U Non-powered convenience outlet; Supply an/drive Type/Motor Low-ambient kit; Return air smoke detector D Direct Drive (- Tons) W High Static (two-speed Belt Drive models) V Low-ambient kit; Return air smoke detector V Two-Speed Belt Drive (also designates -Ton with two-stage compressor) W Low-ambient kit; Supply air smoke detector Y Low-ambient kit; Return & Supply actory-installed Options air smoke detectors A Ultra Low-Leak Downflow Economizer R Ultra Low-Leak Downflow Economizer; Z Return & Supply air smoke detectors B DD-BAnet protocol DD-BAnet protocol; Ultra Low-Leak Downflow Economizer; Disconnect Switch (non-fused) DD-BAnet protocol V Low-Leak Downflow Economizer actory-installed Options H Disconnect Switch (non-fused) W Low-Leak Downflow Economizer X Standard Aluminized Heat Exchanger J Ultra Low-Leak Downflow Economizer; Disconnect Switch (non-fused) S Stainless-Steel Heat Exchanger Disconnect Switch (non-fused) X No Options D Hinged Panels M Disconnect Switch (non-fused); DD-BAnet protocol K Stainless-Steel Heat Exchanger; Hinged Panels Note: Not all options available for all products. B Phase Monitor X= No Options in character th J Stainless Steel Heat Exchanger; Phase Monitor M Hinged Panel; Phase Monitor L Stainless-Steel Heat Exchanger; Hinged Panels; Phase Monitor www.daikinac.com SS-DG7

Nomenclature actory-installed Options Stainless-Steel Heat Exchanger (Gas units only): A tubular heat exchanger made of 09-type stainless steel is installed in the unit. Low-Ambient Kit: Allows for cooling operation at lower outdoor temperatures. On the - to -ton units, cooling operation is extended from 0 ambient temperature to outside air temperature. On 7½ -0 ton units, cooling operation is extended from ambient temperature to 0 outside air temperature. or ton units, cooling operation is extended from ambient temperature to 0 outside air temperature. Economizers (Downflow): Based on air conditions, can provide outside air to cool the space. Electric Heat Kits (A and heat pump units only): Available in all voltage options. Non-powered onvenience Outlet: A 0V, A, GI outlet makes it easier for technicians to service the unit once an electrician runs power to the outlet. Powered onvenience Outlet: A 0V, A, GI outlet powered with a transformer built into the unit. When a factory-installed powered convenience outlet is installed in the equipment, the unit MA (Min. ircuit Ampacity) will increase by 7.A/.A for 0/0V units, increase by.a for 0V units, and by.a for 7V units. The MOP (Max. Overcurrent Protection) device must be sized accordingly. Disconnect Switch (non-fused; -phase units only): A disconnect switch is installed in the unit and factory wiring will be complete from the switch to the unit. Please note that for air conditioning (DS units) and heat pump models (DSH units), the appropriate electric heat kit must be ordered to be factory-installed along with the disconnect switch (non-fused) when it is ordered. Please note that for models with a powered convenience outlet option and a disconnect switch (non-fused) option, the power to the powered convenience outlet will be shut off when the disconnect switch (non-fused) is in the off position. Return Air and/or Supply Air Smoke Detectors: Return air and/or supply air smoke detectors are installed in the unit. Hinged Access Panels: Allows access to unit s major components. ombined with latches for easy access to control box, compressor, filters and blower motor. Available on all units. Phase Monitor: Phase monitor ( phase only), available for - ton DS, D and DT series models. Phase monitor shall provide protection for motors and compressors against problems caused by phase loss, phase reversal and phase unbalance. Phase monitor is equipped with an LED that provides an ON or AULT indicator. DD ontroller: DD communicating controller, available for - ton DS, D and DT series models with on-board BAnet communication interface. High static belt drive assembly, factory installed. SS-DG7 www.daikinac.com

Product Specifications 7½ Tons DG090 0V*** B* DG090 0V*** B* DG090 07V*** B* ooling apacity Total BTU/h,000,000,000 Sensible BTU/h,00,00,00 EER / IEER. /.0. /.0. /.0 Decibels AHRI Reference #s 709 709 709 Heating apacity High Input / Output BTU/h 0,000 /,000 0,000 /,000 0,000 /,000 Low Input / Output BTU/h 7,00 /,000 7,00 /,000 7,00 /,000 Thermal Efficiency (%) 0 0 0 Temperature Rise Range ( ) No. of Burners Evaporator Motor / oil Motor Type -speed Belt Drive -speed Belt Drive -speed Belt Drive Indoor Nominal M,000,000,000 LA (ooling).0.9. Horsepower / RPM / 70-0 / 70-0 / 7-70 Piston Size (ooling) 0.07 0.07 0.07 ilter Size (Qty) () x 0 x () x 0 x () x 0 x Drain Size (NPT) ¾" ¾" ¾" R-0A Refrigerant harge: ir # / # 00 oz. 00 oz. 00 oz. Evaporator oil ace Area (ft²).9.9.9 Rows Deep / ins per Inch / / / Belt Drive Evap an Data # of Wheels (D x W) (" x ") (" x ") (" x ") Motor / Blower Sheave VL0 / AK7 VL0 / AK7 VL0 / AK7 Belt AX AX AX ondenser an / oil Quantity of ondenser an Motors Horsepower - RPM ¼ - 07 ¼ - 07 ¼ - 07 an Diameter / # an Blades / / / Outdoor Nominal M 7,00 7,00 7,00 ace Area (ft²)... Rows Deep / ins per Inch X / 7± ' X / 7± ' X / 7± ompressor Quantity / Type / Stage / Scroll / / Scroll / / Scroll / ompressor RLA / LRA. /.. /.0. /.0 Electrical Data Voltage / Phase 0/0--0 0--0 7--0 Indoor Blower HP / LA /.0 /.9 /. Standard Motor Max. External Static.0".0".0" Outdoor an HP / RLA () ¼ /. () ¼ / 0.7 () ¼ / 0. Min. ircuit Ampacity¹. /..0. Max. Overcurrent Protection (amps)² 0 / 0 0 Entrance Power Supply Locating Locating Locating Entrance ontrol Voltage Dimple Dimple Dimple Operating Weight (lbs) 00 00 00 Ship Weight (lbs) 7 7 7 ¹ Wire size should be determined in accordance with National Electrical odes. Extensive wire runs will require larger wire sizes. ² May use fuses or HAR-type circuit breakers of the same size as noted. Note: Always check the S&R plate for electrical data on the unit being installed. www.daikinac.com SS-DG7

Product Specifications ½ Tons DG0 0V***A* DG0 0V***A* DG0 07V***A* ooling apacity Total, BTU/h 0,000 0,000 0,000 Sensible BTU/h 70,0 70,0 70,0 EER / IEER. /.. /.. /. Decibels ARI Reference #s 7709 7709 7709 Heating apacity High Input / Output BTU/h 0,000 /,000 0,000 /,000 0,000 /,000 Low Input / Output BTU/h 7,00 /,000 7,00 /,000 7,00 /,000 Thermal Efficiency (%) 0 0 0 Temperature Rise Range ( ) - - - No. of Burners Evaporator Motor / oil Motor Type -Speed Belt Drive -Speed Belt Drive -Speed Belt Drive Indoor Nominal M,00,00,00 Indoor Motor LA (ooling).0.9. Horsepower - RPM / 70-0 / 70-0 / 7-70 Piston Size (ooling) 0.00 0.00 0.00 ilter Size (Qty) () x x () x x () x x Drain Size (NPT) /" /" /" R-0A Refrigerant harge ir # # (oz.) 0 0 0 Evaporator oil ace Area (ft) 0. 0. 0. Rows Deep / ins per Inch / / / Belt Drive Evap an Data # of Wheels (D x W) (" x ") (" x ") (" x ") Motor Sheave / Blower Sheave VL0 / AK7 VL0 / AK7 VL0 / AK7 Belt AX AX AX ondenser an / oil Quantity of ondenser an Motors Horsepower - RPM ¼ -,07 ¼ -,07 ¼ -,07 an Diameter / # an Blades / / / Outdoor Nominal M,00,00,00 ace Area (ft²)... Rows Deep / ins per Inch ' X / 7± ' X / 7± ' X / 7± ompressor Quantity / Type / Stage / Scroll / / Scroll / / Scroll / ompressor RLA / LRA ea.. / 9. /.0 / Electrical Data / Static Voltage / Phase (0 Hz) 0/0--0 0--0 7--0 Outdoor an LA ea..0 0.70 0. Min. ircuit Ampacity¹. /.. 7. Max. Overcurrent Protection (amps)² 0 / 0 0 0 Entrance Power Supply Locating Locating Locating Entrance ontrol Voltage Dimple Dimple Dimple Operating Weight (lbs) 0 0 0 Ship Weight (lbs) ¹ Wire size should be determined in accordance with National Electrical odes. Extensive wire runs will require larger wire sizes. ² May use fuses or HAR-type circuit breakers of the same size as noted. Note: Always check the S&R plate for electrical data on the unit being installed. SS-DG7 www.daikinac.com

Product Specifications 0 Tons DG0 0V***B* DG0 0V***B* DG0 07V***B* ooling apacity Total BTU/h,000,000,000 Sensible BTU/h,700,700,700 EER / IEER. /.. /.. /. Decibels ARI Reference #s 99 99 99 Heating apacity High Input/Output (BTU/h) 0,000/,000 0,000/,000 0,000/,000 Low Input/Output (BTU/h) 7,00/,000 7,00/,000 7,00/,000 Thermal Efficiency (%) 0 0 0 Temperature Rise Range ( ) - - - No. of Burners Evaporator Motor / oil Motor Type -speed Belt Drive -speed Belt Drive -speed Belt Drive Indoor Nominal M,00,00,00 Indoor Motor LA (ooling)..0. Horsepower - RPM.0/70-.0/70-.0/70- Piston Size (ooling) 0.0 0.0 0.0 ilter Size (Qty) () x x () x x () x x Drain Size (NPT) ¾" ¾" ¾" R-0A Refrigerant harge ir # & (oz.) / / / Evaporator oil ace Area (ft²) 0. 0. 0. Rows Deep/ ins per Inch / / / Belt Drive Evap an Data # of Wheels (D x W) () x () x () x Motor Sheave / Blower Sheave VL0 / AK7 VL0 / AK7 VL0 / AK7 Belt AX0 AX0 AX0 ondenser an / oil Quantity of ondenser an Motors Horsepower - RPM ⅓ -,07 ⅓ -,07 ⅓ -,07 an Diameter / # an Blades / / / Outdoor Nominal M,00,00,00 ace Area (ft²)... # oils / Rows Deep - ins per Inch X / 7± X / 7± X / 7± ompressor Quantity / Type / Stage / Scroll / / Scroll / / Scroll / ompressor RLA / LRA ea. / 0.0 7. /.0.7 /.9 Electrical Data Voltage/Phase/ requency 0/0--0 0--0 7--0 Outdoor an RLA ea..0".".0" Standard Motor Max. External Static.00 0. 0.7 Min. ircuit Ampacity¹. /... Max. Overcurrent Protection (amps)² 0 / 0 0 Entrance Power Supply Locating Locating Locating Entrance ontrol Voltage Dimple Dimple Dimple Operating Weight (lbs) 0 0 0 Ship Weight (lbs) ¹ Wire size should be determined in accordance with National Electrical odes. Extensive wire runs will require larger wire sizes. ² May use fuses or HAR-type circuit breakers of the same size as noted. Note: Always check the S&R plate for electrical data on the unit being installed. www.daikinac.com SS-DG7

Product Specifications ½ Tons DG0 0V***B* DG0 0V***B* DG0 07V***B* ooling apacity Total, BTU/h,000,000,000 Sensible BTU/h 97,000 97,000 97,000 EER / IEER 0. /. 0. /. 0. /. Decibels ARI Reference #s 07 07 07 Heating apacity High Input / Output BTU/h 0,000/,000 0,000/,000 0,000/,000 Low Input / Output BTU/h 7,00/,000 7,00/,000 7,00/,000 Thermal Efficiency (%) 0 0 0 Temperature Rise Range ( ) - - - No. of Burners Evapoartor Motor / oil Motor Type (Belt Drive) -speed Belt Drive -speed Belt Drive -speed Belt Drive Indoor Nominal M,00,00,00 Indoor Motor LA (ooling) 9... Horsepower - RPM.0/70-.0/70-.0/70- Piston Size (ooling) 0.9 0.9 0.9 ilter Size (Qty) () 0" x 0" x " () 0" x " x " () 0" x 0" x " () 0" x " x " () 0" x 0" x " () 0" x " x " Drain Size (NPT) ¾" ¾" ¾" R-0A Refrigerant harge ir #/ # (oz.) 0 0 0 Evaporator oil ace Area (ft )... Micro-hannel ins per Inch Belt Drive Evap an Data # of Wheels (D x W) () " x " () " x " () " x " Motor Sheave / Blower Sheave VP / AK79 VP / AK79 VP / AK79 Belt AX9 AX9 AX9 ondenser an / oil Quantity of condenser an Motors Horsepower - RPM ⅓ -,07 ⅓ -,07 ⅓ -,07 an Diameter / # an Blades / / / Outdoor Nominal M,00,00,00 ace Area (ft )... # oils /ins per Inch ompressor Quantity / Type / Stage / Scroll / / Scroll / / Scroll / ompressor RLA / LRA ea.. / 9 0. / 7 7.7 / Electrical Data / Static Voltage / Phase / requency 0/0--0 0--0 7--0 Standard Motor Max. External Static."."." Outdoor an LA ea... 0.9 Min. ircuit Ampacity. /... Max. Overcurrent Protection (amps) 0 / 0 0 Entrance Power Supply Locating Locating Locating Entrance ontrol Voltage Dimple Dimple Dimple Operating Weight (lbs) Ship Weight (lbs) 0 0 0 ¹ Wire size should be determined in accordance with National Electrical odes. Extensive wire runs will require larger wire sizes. ² May use fuses or HAR-type circuit breakers of the same size as noted. Note: Always check the S&R plate for electrical data on the unit being installed. SS-DG7 www.daikinac.com 7

Expanded ooling Data 7½ Tons Outdoor Ambient Temperature 7 9 0 Entering Indoor Wet Bulb Temperature IDB Airflow 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 70 7 000 00 MBh 9 9-7 9-9 - 0 9-7 79 7-7 7 0 - S/T 0.7 0. 0. - 0.77 0. 0. - 0.79 0. 0. - 0. 0. 0.7-0. 0.7 0.9-0. 0.7 0.9 - T 7... - 7.7.. - 7.7.. - 7...7-7... -.. 0. - kw... -..7.9 -.9 7. 7. - 7. 7. 7.7-7. 7.7.0-7..0. - Hi PR - 9-9 9-0 - - 0 - Lo PR 0 - - 9 - - 9-7 - MBh 7 9-9 - 0 9-7 - 7 77-9 7 7 - S/T 0.7 0.9 0. - 0.7 0. 0. - 0.7 0. 0. - 0.7 0. 0. - 0. 0.7 0.7-0. 0. 0.7 - T..7.9 -..9. -..0. -... -...0-7... - kw... -... -.9 7.0 7. - 7. 7. 7. - 7. 7.7 7.9-7. 7.9. - Hi PR 9-0 79 9-9 - - 7 07 0-0 7 - Lo PR 07-0 - 7 - - 0 0 - - MBh 77 0-7 7-7 7-7 7-7 7-7 - S/T 0. 0.7 0.0-0.7 0.9 0. - 0.7 0. 0. - 0.7 0. 0. - 0.7 0. 0. - 0.7 0. 0. - T 0. 7.. - 0. 7.7. - 0. 7.7. - 0. 7.9. - 0. 7.. - 9.0.. - kw.9.. -...7 -.7.9 7. - 7. 7. 7. - 7. 7. 7.7-7. 7.7.0 - Hi PR - 7-0 - 7-7 9 7-0 - Lo PR 0-0 7 - - 0 9 - - 0-7 7 000 00 MBh 90 9 0 9 0 9 00 9 9 77 0 9 7 7 0 S/T 0. 0.7 0.7 0. 0. 0.7 0.9 0. 0.90 0.0 0. 0. 0.9 0. 0. 0. 0.9 0. 0. 0. 0.97 0.7 0. 0. T 0... 0. 0... 0. 0... 0.7 0. 9.0. 0.7 0..7. 0. 9.0 7.. 9.9 kw....7..7.9 7. 7.0 7. 7. 7. 7. 7. 7.7.0 7. 7..0. 7.9... Hi PR 0 0 0 7 9 90 07 9 7 9 0 Lo PR 09 7 0 9 9 7 9 9 MBh 9 0 9 99 90 97 79 9 7 77 90 70 7 7 S/T 0. 0.7 0. 0. 0. 0.7 0.7 0. 0. 0.77 0. 0. 0. 0.79 0.0 0. 0.9 0. 0. 0. 0.9 0. 0. 0. T.0 9..9.0. 9.... 9.... 9.... 9..0.0 9...9 0. kw......7.9 7..9 7. 7. 7. 7. 7. 7.7 7.9 7. 7.7.0. 7..0.. Hi PR 77 9 9 9 0 0 0 0 Lo PR 0 9 7 9 7 7 MBh 79 9 77 79 9 7 77 90 7 7 7 9 7 77 7 77 S/T 0.7 0.9 0. 0. 0. 0.7 0. 0. 0. 0.7 0. 0. 0. 0.7 0. 0. 0. 0.79 0.0 0. 0.9 0.0 0.0 0. T.. 7...7. 7.9..7. 7.9..9.0.0...7 7...0 0... kw.0......7.9..9 7. 7. 7. 7. 7. 7.7 7. 7. 7..0 7. 7..0. Hi PR 7 9 7 9 0 9 9 0 7 9 7 99 9 0 Lo PR 0 0 9 7 9 0 7 7 7 0 IDB: Entering Indoor Dry Bulb Temperature Shaded area reflects AA (TVA) Rating onditions Amps: Unit amps (comp.+ evaporator + condenser fan motors) High and low pressures are measured at the liquid and suction access fittings. Design Superheat 7±, Design Subcooling ± pressures measured @ the suction and liquid service ports, AHRI 9 test conditions www.daikinac.com SS-DG7

Expanded ooling Data 7½ Tons (cont.) Outdoor Ambient Temperature 7 9 0 Entering Indoor Wet Bulb Temperature IDB Airflow 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 0 7 000 00 MBh 9 9 97 0 7 9 9 0 7 9 99 9 97 79 9 7 7 0 S/T 0.9 0.7 0.7 0. 0.9 0.90 0.7 0..00 0.9 0.7 0..00 0.9 0.7 0..00.00 0. 0..00.00 0. 0. T....0..9 9.0...9 9.0...0 9....0.9. 9.9 0. 7.. kw....7.7. 7.0 7. 7. 7. 7. 7. 7. 7. 7..0 7.7 7.9.. 7.9... Hi PR 7 7 0 7 0 7 7 9 90 0 90 Lo PR 0 7 7 9 0 7 7 0 7 MBh 7 9 9 0 9 99 90 9 9 77 7 9 7 7 77 S/T 0. 0. 0.7 0.0 0.9 0. 0.70 0. 0.9 0. 0.7 0. 0.97 0.9 0.7 0..00 0.9 0.77 0.7.00 0.9 0.77 0. T.. 9.... 9.... 9...9.9 0.0.9.. 9.7.7.7...7 kw....7..7.9 7. 7.0 7. 7. 7. 7. 7. 7.7.0 7. 7..0. 7.9... Hi PR 0 0 0 7 9 90 07 9 7 9 0 Lo PR 09 7 0 9 9 7 7 9 9 MBh 0 7 9 7 0 9 7 7 9 7 7 7 7 7 77 7 7 7. S/T 0. 0.0 0. 0. 0. 0. 0.7 0. 0.9 0. 0.9 0. 0.9 0. 0.7 0. 0.97 0.9 0.7 0. 0.9 0.9 0.7 0. T..0. 7....0 7....0 7.... 7.7...9 7... 0.. kw.0...... 7.0. 7.0 7. 7. 7. 7. 7. 7. 7. 7. 7.. 7.7 7.9.. Hi PR 9 0 7 7 77 9 0 9 7 9 7 0 70 90 Lo PR 0 9 0 9 0 9 9 7 000 00 MBh 9 9 97 0 9 90 9 0 7 9 99 90 9 0 9 7 7 79 S/T 0.97 0.9 0. 0.7.00 0.97 0. 0.7.00.00 0.90 0.7.00.00 0.9 0..00.00 0.9 0..00.00 0.97 0. T.0.. 9...9. 9...0. 9..0.. 9.7.9.. 9. 0. 0..0. kw.....7. 7. 7. 7. 7. 7. 7.7 7. 7. 7.. 7. 7.9...0...7 Hi PR 9 7 70 9 07 0 07 9 0 77 9 9 7 9 Lo PR 9 0 7 0 9 7 9 9 7 7 9 7 MBh 90 9 00 9 9 90 9 9 7 79 9 7 7 77 S/T 0.9 0.9 0. 0.7 0.9 0.9 0. 0.7 0.9 0.9 0. 0.7.00 0.9 0.9 0.7.00.00 0.9 0.7.00.00 0.9 0. T.0.. 0...9. 0...9. 0....7 0..9.. 0....9.9 kw....7.7. 7.0 7. 7. 7. 7. 7. 7. 7. 7..0 7.7 7.9.. 7.9... Hi PR 7 7 0 7 0 7 7 9 90 0 90 Lo PR 0 7 7 9 0 7 7 0 7 MBh 7 9 79 9 7 79 7 77 7 7 77 7 7 7.9 S/T 0.9 0. 0.7 0. 0.9 0.9 0. 0.7 0.9 0.9 0. 0.7 0.9 0.9 0. 0.7.00 0.9 0.9 0.7.00 0.99 0.9 0.7 T 7. 7..9.. 7.7..7. 7...7..0..9 7. 7..0...7.. kw....... 7.0.9 7.0 7. 7. 7. 7. 7. 7. 7. 7.7 7.9. 7. 7.9.. Hi PR 9 7 0 79 9 0 9 0 99 7 07 0 0 7 9 Lo PR 07 0 0 7 0 0 0 IDB: Entering Indoor Dry Bulb Temperature Shaded area reflects AHRI Rating onditions Amps: Unit amps (comp.+ evaporator + condenser fan motors) High and low pressures are measured at the liquid and suction access fittings. Design Superheat 7±, Design Subcooling ± pressures measured @ the suction and liquid service ports, AHRI 9 test conditions SS-DG7 www.daikinac.com 9

Expanded ooling Data ½ Tons Outdoor Ambient Temperature 7 9 0 Entering Indoor Wet Bulb Temperature IDB Airflow 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 70 0 00 90 MBh 00 0-9 0-9 99 0-9 9 0-9 00-9 - S/T 0.7 0. 0. - 0.7 0. 0. - 0.77 0. 0. - 0.0 0.7 0. - 0. 0.9 0. - 0. 0.70 0. - T 7... - 7.7.. - 7.7.. - 7...7-7... -.. 0. - kw 7. 7. 7. - 7.7 7.. -... -..7 9.0 -.9 9.0 9. - 9. 9. 9. - Hi PR 70-7 7 0-0 - 7 9-9 - 9 - Lo PR 0-9 0 - - 0-9 - - MBh 97 0 0-9 9 0-9 9 0-90 9 0-9 97-79 90 - S/T 0.9 0. 0.0-0.7 0.0 0. - 0.7 0. 0. - 0.7 0. 0. - 0.79 0. 0. - 0.0 0. 0. - T..7.9 -..9. -..0. -... -...0-7... - kw 7. 7. 7. - 7. 7..0 -... -...9 -. 9.0 9. - 9. 9. 9. - Hi PR 7-00 - 00-9 - 7-7 - Lo PR 0-9 - - 9-7 7-0 - MBh 90 9 0-7 9 99-9 97-9 - 79 90-7 7 - S/T 0.7 0. 0.9-0.9 0. 0.0-0.7 0.9 0. - 0.7 0. 0. - 0.7 0. 0. - 0.77 0. 0. - T..0. -.7.. -.7.. -... -... - 7..0. - kw 7.0 7. 7. - 7. 7. 7. - 7.9.0. -...7 -.. 9.0 -.9 9.0 9. - Hi PR 9-7 9-9 - 7 77-7 0-9 - Lo PR 0 0-0 - 9 0-7 - - 7-7 0 00 90 MBh 0 0 99 0 9 97 00 0 9 97 0 90 9 00 07 9 00 S/T 0. 0.7 0. 0. 0. 0.77 0. 0. 0. 0.79 0.9 0. 0.9 0. 0. 0. 0.9 0. 0. 0. 0.9 0. 0. 0. T 0... 0. 0... 0.7 0..9. 0.7 0. 9.0. 0.7 0..7. 0. 9.0 7.. 9.9 kw 7. 7. 7. 7. 7.7 7.9......9.. 9.0 9..9 9. 9. 9.7 9. 9. 9.7 0.0 Hi PR 0 7 9 90 0 9 0 0 9 7 9 9 7 9 Lo PR 07 0 0 7 9 0 0 MBh 99 0 0 9 99 07 9 97 0 9 9 0 0 7 90 97 0 90 97 S/T 0.79 0.70 0. 0. 0. 0.7 0. 0. 0. 0.7 0.7 0. 0. 0.77 0. 0. 0.90 0.0 0. 0. 0.90 0. 0. 0. T.0 9..9.0. 9.... 9.... 9.... 9..0.0 9...9 0. kw 7. 7. 7. 7. 7.7 7.........7 9.0 9..9 9.0 9. 9. 9. 9. 9. 9.9 Hi PR 70 7 7 0 0 9 7 9 09 9 9 09 Lo PR 0 9 0 9 0 9 9 MBh 9 9 0 09 9 9 99 0 7 9 97 0 7 9 0 0 90 9 7 77 9 S/T 0.7 0. 0. 0. 0.79 0.70 0. 0. 0. 0.7 0. 0. 0. 0.7 0. 0. 0. 0.77 0.9 0. 0.7 0.7 0.9 0. T. 9.7... 9.9... 9.9... 0.... 9... 0... 0. kw 7.0 7. 7. 7. 7. 7.7 7.9. 7.9......7 9.0.. 9. 9..9 9. 9. 9.7 Hi PR 7 9 7 9 07 9 7 9 97 77 0 7 7 9 Lo PR 0 09 9 7 09 0 0 9 7 9 7 9 9 IDB: Entering Indoor Dry Bulb Temperature Shaded area reflects AA (TVA) Rating onditions Amps: Unit amps (comp.+ evaporator + condenser fan motors) High and low pressures are measured at the liquid and suction access fittings. Design Subcooling, 0± @ liquid access fitting; AHRI 9 test conditions. Design Superheat ± @ compressor suction access fitting. 0 www.daikinac.com SS-DG7

Expanded ooling Data ½ Tons (cont.) Outdoor Ambient Temperature 7 9 0 Entering Indoor Wet Bulb Temperature IDB Airflow 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 0 0 00 90 MBh 0 0 0 0 0 99 0 0 9 9 0 9 9 00 07 7 9 99 S/T 0.9 0. 0.9 0. 0.9 0. 0.7 0. 0.9 0.90 0.7 0..00 0.9 0.7 0..00 0.97 0.79 0..00.00 0.79 0. T....0..9 9.0..9.9 9.0... 9...0.7.9. 0. 0. 7.7. kw 7. 7. 7. 7.9 7..0.....7.9.7. 9. 9. 9.0 9. 9. 9. 9. 9. 9. 0. Hi PR 7 7 7 9 09 09 7 79 00 9 7 70 7 9 9 Lo PR 0 9 7 9 7 7 MBh 00 0 0 7 9 00 07 9 9 0 9 9 0 09 9 9 97 0 90 9 S/T 0. 0. 0. 0.9 0.90 0. 0. 0. 0.9 0. 0.70 0. 0.9 0.9 0.7 0. 0.9 0.9 0.7 0. 0.99 0.9 0.7 0. T.. 9.... 9.... 9...9.9 0.0.9.. 9.7.7....7 kw 7. 7. 7. 7. 7.7 7.9......9.. 9.0 9..9 9. 9. 9.7 9. 9. 9.7 0.0 Hi PR 0 7 9 90 0 9 0 0 9 7 97 9 7 9 Lo PR 07 0 0 7 9 0 0 MBh 9 9 0 0 9 9 99 0 90 9 0 9 0 9 9 7 7 9 S/T 0. 0.7 0. 0. 0. 0. 0. 0. 0.9 0. 0. 0. 0.9 0. 0.70 0. 0.9 0.9 0.7 0. 0.9 0.90 0.7 0. T.. 9.9.9.. 0.... 0.... 0...0.0 0.0.0...7.9 kw 7. 7. 7. 7. 7. 7.7 7.9..0...7... 9..7.9 9. 9. 9.0 9. 9. 9. Hi PR 7 97 0 97 0 0 0 7 99 Lo PR 0 0 7 7 0 7 9 0 0 00 90 MBh 0 07 0 0 0 0 7 00 0 07 9 00 0 9 9 99 0 9 9 S/T 0.9 0.9 0. 0.7 0.9 0.9 0. 0.7.00 0.97 0. 0.7.00.00 0.9 0.7.00.00 0.9 0..00.00 0.9 0. T..7. 9...0. 9...0.7 9...0. 9.... 9. 0.7..0. kw 7. 7. 7.7 7.9 7.9.0.....7 9.0.7.9 9. 9. 9. 9. 9. 9. 9. 9. 9. 0. Hi PR 7 90 7 9 70 0 00 7 7 0 Lo PR 09 7 0 9 0 7 9 9 MBh 0 0 09 00 0 07 97 99 0 9 97 0 0 90 9 9 0 9 9 S/T 0.9 0.7 0.79 0. 0.9 0.9 0. 0. 0.9 0.9 0. 0. 0.99 0.9 0.7 0.70.00.00 0.90 0.7.00.00 0.9 0.7 T.0.. 0...9. 0...9. 0....7 0.... 0....9.9 kw 7. 7. 7. 7.9 7..0.....7.9.7. 9. 9. 9.0 9. 9. 9. 9. 9. 9. 0. Hi PR 7 7 7 9 09 09 7 79 00 9 7 70 7 9 9 Lo PR 0 9 7 9 7 7 MBh 9 9 0 07 9 9 9 0 90 9 9 0 9 9 00 9 9 77 79 S/T 0.7 0. 0.7 0. 0.9 0.7 0.79 0. 0.9 0.90 0. 0.7 0.9 0.9 0. 0.7 0.99 0.9 0.7 0.7.00 0.97 0.7 0.7 T..0. 0..7..9 0.7...9 0.7.9.. 0.9... 0.... 9. kw 7. 7. 7. 7.7 7. 7..0.....7...9 9.. 9.0 9. 9. 9. 9. 9. 9. Hi PR 7 79 00 00 0 7 7 0 Lo PR 0 0 9 7 9 0 7 7 7 0 IDB: Entering Indoor Dry Bulb Temperature Shaded areas reflect AHRI Rating onditions AM: Unit amps (comp.+ evaporator + condenser fan motors) High and low pressures are measured at the liquid and suction access fittings. Design Subcooling, 0± @ liquid access fitting; AHRI 9 test conditions. Design Superheat ± @ compressor suction access fitting. SS-DG7 www.daikinac.com

Expanded ooling Data 0 Tons Outdoor Ambient Temperature 7 9 0 Entering Indoor Wet Bulb Temperature IDB Airflow 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 70 9 00 00 MBh 9 - - 0-0 0 0-00 0-9 9 0 - S/T 0.7 0. 0. - 0.7 0. 0. - 0.7 0. 0. - 0.0 0.7 0.7-0. 0.70 0. - 0. 0.70 0.9 - T 9... - 9.7 7..9-9.7 7..0-9.9 7..0-9..9.9 -...0 - kw... -..9 9. - 9. 9. 9.7-9.7 9.9 0. - 0.0 0. 0. - 0. 0. 0.9 - Hi PR 7-77 9-9 - 9 0-0 9-0 07 - Lo PR 0 - - - 0-7 7-9 - MBh 0-0 - 0 09 9-0 0 7-9 0-90 9 0 - S/T 0.70 0. 0.0-0.7 0. 0. - 0.7 0. 0. - 0.77 0. 0. - 0.0 0. 0. - 0.0 0.7 0. - T 0. 7.. - 0. 7.. - 0. 7.. - 0.7 7.9. - 0. 7.7. - 9... - kw... -.7.9 9. - 9. 9. 9. - 9. 9. 0. - 0.0 0. 0. - 0. 0. 0. - Hi PR 7-7 9 - - 0-00 0-7 0 - Lo PR 0 0 0-0 7 7 - - 0 7 9 - - 0 - MBh 0 0-99 0-97 0 0-9 9 0-90 9 0-9 - S/T 0.7 0. 0.9-0.70 0. 0.0-0.7 0.0 0. - 0.7 0. 0. - 0.77 0. 0. - 0.77 0. 0. - T. 9.. -. 9..0 -.9 9..0 -.0 9.9. -.7 9..9 -...9 - kw.0.. -..7.9-9.0 9. 9. - 9. 9. 9.9-9.7 9.9 0. - 0.0 0. 0. - Hi PR 7 70-0 - 0-7 9-7 - 9 7 - Lo PR 0 07 7-0 - 0 7 - - 9 - - 7 9 00 00 MBh 9 9 0 0 0 9 0 0 9 97 0 S/T 0. 0.7 0. 0. 0. 0.77 0. 0. 0.9 0.79 0.0 0. 0.9 0. 0. 0. 0.9 0. 0. 0. 0.9 0. 0. 0. T. 0.7 7.0.7..0 7..9..0 7..9.0. 7..0. 0. 7... 9..9.0 kw...7.9. 9.0 9. 9. 9. 9. 9. 0. 9. 9.9 0. 0. 0. 0. 0. 0.9 0. 0..0. Hi PR 0 9 9 0 0 77 90 0 0 9 Lo PR 0 9 0 0 MBh 0 07 0 9 0 07 99 0 9 9 9 0 0 S/T 0.79 0.7 0. 0. 0. 0.7 0. 0. 0. 0.7 0.7 0. 0.7 0.7 0.9 0. 0.90 0. 0. 0. 0.9 0. 0. 0. T.. 7.7..7. 7.9..7.9 7.9..9.0.0...7 7...0 0... kw......9 9. 9. 9. 9. 9.7 0.0 9.7 9.9 0. 0. 0.0 0. 0. 0.9 0. 0. 0.9. Hi PR 7 9 77 9 9 9 7 9 0 0 9 79 0 07 9 Lo PR 0 0 7 0 9 7 7 7 9 MBh 0 07 0 0 99 0 0 9 99 07 9 9 0 09 7 9 0 S/T 0.77 0.9 0. 0. 0.79 0.7 0. 0. 0. 0.7 0. 0. 0. 0.7 0.7 0. 0.7 0.7 0.9 0. 0. 0.79 0.0 0. T..0 9.7... 9.9.7.. 9.9... 0..9.. 9..7.... kw....7..7 9.0 9. 9. 9. 9. 9. 9. 9.7 9.9 0. 9. 0.0 0. 0. 0. 0. 0..0 Hi PR 0 7 9 9 0 9 0 9 7 9 9 9 Lo PR 0 0 07 9 0 7 7 7 IDB: Entering Indoor Dry Bulb Temperature Shaded area reflects AA (TVA) Rating onditions Amps: Unit amps (comp.+ evaporator + condenser fan motors) High and low pressures are measured at the liquid and suction access fittings. Design Superheat 7±, Design Subcooling ± pressures measured @ the suction and liquid service ports, AHRI 9 test conditions www.daikincomfort.com SS-DG7

Expanded ooling Data 0 Tons (cont.) Outdoor Ambient Temperature 7 9 0 Entering Indoor Wet Bulb Temperature IDB Airflow 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 0 9 00 00 MBh 0 7 7 09 9 0 0 9 9 0 S/T 0.9 0. 0.70 0. 0.9 0.9 0.7 0..00 0.9 0.7 0..00 0.9 0.77 0..00.00 0.79 0..00.00 0.0 0. T.. 0.9.7....9....9... 7.......0 9.7.7 kw...7 9.0.9 9. 9. 9. 9. 9. 9. 0. 9. 0.0 0. 0. 0. 0. 0.7.0 0. 0.7.0. Hi PR 7 99 0 9 9 90 7 0 Lo PR 07 0 0 7 9 7 0 0 MBh 7 0 09 9 7 0 09 0 0 0 9 9 0 09 S/T 0.7 0. 0.7 0.0 0.90 0. 0.9 0. 0.9 0.7 0.7 0. 0.9 0.90 0.7 0. 0.99 0.9 0.7 0.7.00 0.9 0.7 0. T... 7.... 7.... 7..7.. 7....9 7... 0.. kw...7.9. 9.0 9. 9. 9. 9. 9. 0. 9. 9.9 0. 0. 0. 0. 0..0 0. 0..0. Hi PR 0 9 9 0 0 77 90 0 0 9 Lo PR 0 9 0 0 9 MBh 0 0 0 0 0 0 0 0 7 9 00 07 9 9 0 09 9 0 S/T 0. 0.79 0. 0. 0.7 0. 0.7 0. 0.9 0. 0. 0. 0.9 0. 0.70 0. 0.9 0.90 0.7 0. 0.97 0.9 0.7 0. T 9. 7.9. 9. 9... 9. 9... 9. 9.7..7 9. 9... 9. 7.... kw....7.. 9. 9. 9. 9. 9. 9. 9. 9.7 0.0 0. 9.9 0. 0. 0.7 0. 0. 0.7.0 Hi PR 7 7 7 9 09 09 79 00 7 9 0 9 7 7 97 Lo PR 0 09 9 7 0 0 9 7 9 9 9 00 00 MBh 0 7 9 0 9 7 0 0 0 9 00 0 S/T 0.9 0.9 0. 0.7 0.99 0.9 0. 0.7.00 0.9 0.9 0.7.00.00 0.9 0.7.00.00 0.9 0..00.00 0.9 0. T...9. 7..7...7.7...0...0.7...7.9.. 0. kw... 9.0 9.0 9. 9. 9.7 9. 9. 9.9 0. 9.9 0. 0. 0.7 0. 0. 0.. 0. 0... Hi PR 7 9 0 07 9 0 9 70 9 0 9 7 9 0 9 Lo PR 0 7 0 9 7 7 MBh 9 0 0 0 0 0 7 9 97 0 0 S/T 0.9 0. 0.0 0. 0.9 0.9 0. 0.7 0.97 0.9 0. 0.9.00 0.97 0.7 0.7.00.00 0.9 0.7.00.00 0.9 0.7 T 7.9 7..9.. 7...7. 7.....0..9 7.0 7....0... kw...7 9.0.9 9. 9. 9. 9. 9. 9. 0. 9. 0.0 0. 0. 0. 0. 0.7.0 0. 0.7.0. Hi PR 7 99 0 9 9 90 7 0 Lo PR 07 0 0 7 9 7 0 0 MBh 07 09 0 07 9 0 0 09 00 0 07 9 97 0 0 90 9 00 S/T 0. 0. 0.77 0. 0.9 0. 0.0 0. 0.9 0.90 0. 0.7 0.97 0.9 0. 0.7.00 0.97 0.7 0.7.00 0.9 0. 0.7 T.0 0..9.0. 0.9 9... 0.9 9...7. 9... 0.7 9.0...7 7.. kw.....7.9 9. 9. 9. 9. 9. 9.9 9. 9. 0. 0. 0.0 0. 0. 0. 0. 0. 0.. Hi PR 7 90 7 9 70 0 00 0 7 7 0 Lo PR 0 0 0 09 7 0 7 9 0 0 0 IDB: Entering Indoor Dry Bulb Temperature Shaded area reflects AHRI Rating onditions Amps: Unit amps (comp.+ evaporator + condenser fan motors) High and low pressures are measured at the liquid and suction access fittings. Design Superheat 7±, Design Subcooling ± pressures measured @ the suction and liquid service ports, AHRI 9 test conditions SS-DG7 www.daikincomfort.com

Expanded ooling Data ½ Tons Outdoor Ambient Temperature 7 9 0 Entering Indoor Wet Bulb Temperature IDB Airflow 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 70 00 00 00 MBh... - 9.7..7 -...9 -. 7.9. -..0. - 7...0-0... - S/T 0. 0. 0. - 0. 0.7 0. - 0. 0.9 0. - 0.70 0. 0. - 0.7 0. 0. - 0.7 0. 0. - 0.7 0. 0.9 - Delta T 9 7-9 7-9 7-0 - 9 7 - - 7 - KW 0. 0.77. -..0.97 -.07..7 -.70.9.0 -...9 -.70.00.7 -..0.99 - AM 7.. 9. - 9. 0.. -... -... -.7 7.. -. 9.7.0 -.0.0. - HI PR 7-0 - - 9 - - 9 7-77 - LO PR 0 09 9-09 - 0 - - - 7 9-0 0 - MBh.9.0 7.7 -.7 0.. -. 7. 0. - 9..9.7 -.7 7. 9. -.7 7.9 9. - 0.0 0. 9. - S/T 0. 0. 0.7-0. 0. 0. - 0.7 0. 0.9-0.9 0. 0.0-0.7 0.0 0. - 0.7 0. 0. - 0.79 0. 0. - Delta T - 9-9 - 9-9 - 0 7-0 7 - KW 0. 0..0 -..0.7 -.97.. -.9.7.9 -... -..9. -.9..7 - AM 7..0.9-9. 0.. -.0.. -..0. -. 7.. -. 9. 0.7-0...0 - HI PR 9-0 0 - - 90-07 9-0 - 7 0 7 - LO PR 0 0-07 - 9 0-7 - - 7-9 - MBh..9. -. 9.. -..7. - 9... -. 7..7-0.9 0. 9. - 9.9 00. 0.0 - S/T 0. 0. 0. - 0. 0. 0.7-0. 0. 0.7-0.7 0. 0.9-0.9 0. 0.0-0.70 0. 0.0-0.7 0. 0. - Delta T 9-0 - 0-0 - 0 - - - KW 0. 0. 0.7-0.99.. -..9. -...9 -.0.0. -...9 -.9.90. - AM.7 7.. -. 9. 0. -..9.9 -..0. -.. 7. - 7.. 9. - 9. 0.. - HI PR 0 7-7 9 0-0 - 7 99-9 9-7 70 9-9 - LO PR 99 0-0 - 0 - - 9 7 - - - 7 00 00 00 MBh. 9.. 7.0... 70.0.7...9. 9. 0..9.... 9...7-0.0.. - S/T 0.7 0.7 0. 0. 0.7 0.70 0.7 0. 0.7 0.7 0.9 0. 0.0 0.7 0. 0. 0. 0.77 0. 0.7 0. 0.77 0. - 0.9 0. 0.9 - Delta T.7 9 9 9 9 0-0 - KW 0. 0..0...9.07..7...7..09..97...0.7...0 -..0.99 - AM 7.9. 9. 0. 0. 0...9....7.... 7.0 7.9 9. 0. 9. 0.. -... - HI PR 7 9 0 07 9 9 70 9 0 7 7 9 9 9-9 - LO PR 0 0 0 7 7 0 7 9 0-9 - MBh.. 7. 9.0.0...0.7.7 0..... 7... 9. 9.. 9..9. 0. 09.9 9.0 7.7 S/T 0.7 0. 0.9 0. 0.7 0.7 0.0 0. 0.7 0. 0. 0. 0.79 0.7 0. 0. 0. 0.7 0. 0. 0. 0.7 0. 0. 0.9 0.0 0.0 0.9 Delta T 9 9 9 9 9 7 7 KW 0. 0.77....0.97..07..7..70.9.....9..70.0.7.9.0...7 AM 7.. 9. 0. 9. 0.......... 7..7 7.. 0.. 9.7.0..0.0..0 HI PR 7 9 0 9 9 7 9 77 LO PR 0 09 9 7 09 0 0 7 7 9 9 0 0 MBh 0....9 7...9...0..7..9..... 7. 0.7 09.9.9 7.7 9. 0. 09. 7.9 S/T 0.9 0. 0.7 0.0 0.7 0. 0.9 0. 0.7 0. 0.0 0. 0.7 0. 0. 0. 0.79 0.7 0. 0. 0.0 0.7 0. 0. 0. 0.77 0. 0. Delta T 0 0 0 0 0 KW 0.9 0. 0..9.0...0.77.0.....07..90.9..0...0..7.0..97 AM.9 7.. 9. 9.0 9.7 0...........7. 7.7 9. 7.7. 9.9. 9.9 0... HI PR 77 9 7 9 9 0 99 0 7 7 0 9 9 LO PR 00 0 0 0 09 7 0 0 9 *NOTE: Shaded areas are TVA and ARI Rating onditions IDB: Entering Indoor Dry Bulb Temperature KW = Total system power High and low pressures are measured at the liquid and suction access fittings. AM: Unit amps (comp.+ evaporator + condenser fan motors) www.daikinac.com SS-DG7

Expanded ooling Data ½ Tons Outdoor Ambient Temperature 7 9 0 Entering Indoor Wet Bulb Temperature IDB Airflow 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 9 7 7 0 00 00 00 MBh...7 7.. 7. 7.9..... 7.7 0. 0. 0. 0.9.7.9.7..9...9.. 0. S/T 0. 0.7 0. 0.7 0. 0.0 0. 0.9 0. 0. 0.7 0.0 0.9 0. 0.9 0. 0.9 0. 0.7 0. 0.9 0.9 0.7 0..00 0.9 0.7 0.9 Delta T 7 7 7 7 7 0 0 KW 0.7 0.9.9...79.7..7..9.7.9.0..97..7..7.9..7.09.0...0 AM.. 9.7 0. 0....9.9.7..7..0 7.. 7.. 9. 0. 9. 0...0.... HI PR 7 7 9 0 0 7 7 7 0 0 77 9 99 7 7 7 LO PR 0 9 9 0 7 7 9 0 MBh..9 7.0 7. 0....9 7. 0. 9.7 0.0.7.7.0. 7.0 9..7. 7.7 0.. 7. 0.7.0.. S/T 0.79 0.7 0.0 0. 0. 0.77 0. 0.7 0. 0.79 0. 0. 0. 0. 0. 0.9 0.90 0. 0.9 0. 0.90 0. 0.9 0. 0.9 0.9 0.7 0. Delta T 7 7 7 7 9 7 7 KW 0. 0..0...9.07..7.....09.....0....0.9..0.99.7 AM 7.9. 9. 0. 0. 0.......... 7. 7.0 7.9 9. 0. 9. 0.......0 HI PR 7 9 9 07 9 9 70 9 0 7 7 9 9 9 9 LO PR 0 0 7 0 7 7 0 0 7 9 7 0 9 9 0 MBh.7..9.9 9..... 9.. 7.7.... 7. 9..0.9 0..0.. 00. 0. 09. 7.0 S/T 0.7 0.7 0. 0. 0.79 0.7 0.0 0. 0. 0.7 0. 0. 0. 0.7 0. 0. 0.7 0. 0. 0.9 0.7 0. 0.7 0.0 0.9 0.9 0.7 0. Delta T 9 9 9 0 9 0 0 0 9 9 7 7 KW 0. 0.9 0.9.9.7..77.0.7....9.7...0.0.7.0.7.77......97 AM 7. 7..7 9. 9. 0.0 0.9..7....9.7...0.9. 9.. 9.0 0.. 0.... HI PR 7 0 9 77 9 9 9 9 07 0 7 0 0 7 0 9 LO PR 0 07 7 0 0 9 9 7 7 00 00 00 MBh 0.7. 0.9 7. 7. 0.0 7. 7..7... 0..9 9. 9...7....7.7 0..9.9. 9.7 S/T 0.7 0. 0.7 0. 0.90 0.7 0.7 0. 0.9 0.9 0.0 0. 0.9 0.9 0. 0.7 0.99 0.9 0. 0.70 0.99 0.9 0.7 0.70.00.00 0.9 0.7 Delta T 7 7 7 7 7 7 7 KW 0.0.0..7..9.7.7.7..0.9.0..7..7....0.....7..77 AM. 9.0 0.0.0 0......0.... 7..9 7.7. 9.. 9.9 0....... HI PR 9 79 9 07 9 7 9 77 0 7 0 9 0 9 9 9 LO PR 0 9 0 0 9 MBh. 9....9...7 9...9.9..7..0 9...0 7. 9.7. 7.. 0. 0..0.9 S/T 0. 0.0 0.7 0. 0. 0. 0.7 0. 0. 0. 0.7 0. 0.9 0.7 0.79 0. 0.9 0.9 0. 0. 0.9 0.9 0. 0.7.00.00 0.9 0.7 Delta T 9 9 7 0 9 0 9 0 9 9 9 7 7 7 7 7 KW 0.7 0.9.9...79.7.7.7..9..9.0..09..7..70.9..7..0... AM.. 9.7 0. 0.....9.7....0 7.. 7.. 9..0 9. 0.......9 HI PR 7 7 9 0 0 7 7 7 0 0 77 9 99 7 0 7 77 LO PR 0 0 9 7 9 0 0 7 7 7 9 MBh.0 7....9. 0. 0..7. 7....0..0 9.. 7..9 0..7.0.9 0.0 0.0 0.9. S/T 0.0 0.77 0.9 0. 0. 0.0 0.7 0. 0. 0. 0.7 0.0 0.7 0. 0.7 0. 0.9 0. 0.79 0. 0.9 0. 0.0 0. 0.99 0.97 0. 0.70 Delta T 0 9 9 9 9 9 9 9 7 9 9 7 KW 0. 0..0.7..0.7..97...0.9.7.9.7.........9..7. AM 7..0.9 0.0 9. 0....0.....0. 7.. 7.. 9.. 9. 0.7. 0...0. HI PR 9 9 0 0 77 90 9 07 0 7 0 7 0 LO PR 0 0 07 9 0 7 7 7 9 9 *NOTE: Shaded areas are TVA and ARI Rating onditions IDB: Entering Indoor Dry Bulb Temperature KW = Total system power High and low pressures are measured at the liquid and suction access fittings. AM: Unit amps (comp.+ evaporator + condenser fan motors) SS-DG7 www.daikinac.com

Airflow Data 7½ Tons ESP ( W..) Two-Speed Standard Belt Drive at High Speed Down Shot Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0. --- --- --- --- --- --- --- --- --- 70. 70 0.9 9 0.7 0. --- --- --- --- --- --- 7 00.9 0 7 00 70 0.7 0 0.9 0. --- --- --- 7. 0 0.99 0 77 0. --- --- --- --- --- --- 0.7 9. 90 0. --- --- --- --- --- --- --- --- --- --- --- --- 0.9 97 99.9 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ESP ( W..) High-Static Belt Drive Two-Speed at High Speed Down Shot Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0.7 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 7 90. 0.9 --- --- --- --- --- --- --- --- --- --- --- --- 9. 909.. --- --- --- --- --- --- --- --- --- 0 0.97 00 9. 7 9.. --- --- --- --- --- --- 0.7 7 09.79 99. --- --- ---. --- --- --- --- --- --- 7 09.0 0 0. --- --- --- --- --- ---.7 --- --- ---. 07.97 --- --- --- --- --- --- --- --- ---.9 --- --- --- 009.0 --- --- --- --- --- --- --- --- --- --- --- ---. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ESP ( W..) Two-Speed Standard Belt Drive at High Speed Horizontal Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0. --- --- --- --- --- --- --- --- --- --- --- --- 70 0.99 07 9 0.7 0. --- --- --- --- --- --- 0 79. 7 77.0 9 70 0. 0 9 0. 0. --- --- --- 9. 9 799.09 9 7 0. --- --- --- --- --- --- 0.7 9. 09. --- --- --- --- --- --- --- --- --- --- --- --- 0.9 9 9.9 0.9 --- --- --- --- --- --- --- --- --- --- --- ---. 7 90.0 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ESP ( W..) High-Static Belt Drive Two-Speed at High Speed Horizontal Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0.7 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 7 90. 0.9 --- --- --- --- --- --- --- --- --- --- --- --- 9 9.79 90.9. --- --- --- --- --- --- --- --- --- 0 007.97 9. 7 909.. --- --- --- --- --- --- 9 0.9 0. 7 9. --- --- ---. --- --- --- --- --- --- 0.0 0. --- --- --- --- --- ---.7 --- --- --- 7. 9 07.7 --- --- --- --- --- --- --- --- ---.9 --- --- --- 970.0 --- --- --- --- --- --- --- --- --- --- --- ---. --- --- ---.9 --- --- --- --- --- --- --- --- --- --- --- --- Notes Assume dry coil with filter in place; M correction for wet coil = % Any adjustment made to the blower should not cause the motor to draw more than the motor rated RLA. Applications that exceed the above could require a larger motor. Minimum rated SM is 0 per ton. www.daikinac.com SS-DG7

Airflow Data ½ Tons ESP ( W..) Two-Speed Standard Belt Drive at High Speed Down Shot Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0. --- --- --- --- --- --- --- --- --- 7 77. 07 70 0.9 0.70 0. --- --- --- --- --- --- 7 797. 9 7 0.97 0 70 0.7 --- --- --- 0. --- --- --- 7.9 0 0.9 7 0.77 --- --- --- --- --- --- 0.7 0 90.7 7 7.09 --- --- --- --- --- --- --- --- --- --- --- --- 0.9 07 9. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ESP ( W..) High-Static Belt Drive Two-Speed at High Speed Down Shot Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0.7 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 90. 0.9 --- --- --- --- --- --- --- --- --- --- --- --- 0 9. 9 90.. --- --- --- --- --- --- --- --- --- 0 00.9 9.9 7 9.. --- --- --- --- --- --- 00. 097 0.7 9 9.7 --- --- ---. --- --- --- --- --- --- 0.0 0. --- --- --- --- --- ---.7 --- --- --- 9. 7 07.9 --- --- --- --- --- --- --- --- ---.9 0. 9.0 --- --- --- --- --- --- --- --- --- --- --- ---. 9 7.7 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ESP ( W..) Two-Speed Standard Belt Drive at High Speed Horizontal Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0. --- --- --- --- --- --- --- --- --- --- --- --- 700 0.9 9 0.7 0. --- --- --- --- --- --- 0 79. 7 0.99 79 700 0.79 --- --- --- 0. --- --- ---. 009 79.0 9 79 0. --- --- --- --- --- --- 0.7 0.7 9. --- --- --- --- --- --- --- --- --- --- --- --- 0.9 9. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ESP ( W..) High-Static Belt Drive Two-Speed at High Speed Horizontal Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0.7 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 7 900. 0.9 --- --- --- --- --- --- --- --- --- --- --- --- 90.7 99 90.. --- --- --- --- --- --- --- --- --- 0 00.9 0 90. 90.. --- --- --- --- --- --- 99 00. 0 0.77 7 9. --- --- ---. --- --- --- --- --- --- 0.97 7 0. --- --- --- --- --- ---.7 --- --- --- 7 09. 79 07.7 --- --- --- --- --- --- --- --- ---.9 07. 0 9.97 --- --- --- --- --- --- --- --- --- --- --- ---. 790. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Notes Assume dry coil with filter in place; M correction for wet coil = % Any adjustment made to the blower should not cause the motor to draw more than the motor rated RLA. Applications that exceed the above could require a larger motor. Minimum rated SM is 0 per ton. SS-DG7 www.daikinac.com 7

Airflow Data 0 Tons ESP ( W..) Two-Speed Belt-Drive at High Speed Down Shot Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0. --- --- --- --- --- --- 70.7 7. 77 7.0 7 0. 0. --- --- --- 0.7 9 7. 9 70. --- --- --- --- --- --- 0. 7.7 7 0. 7. --- --- --- --- --- --- --- --- --- 0. 9 0. 7.7 --- --- --- --- --- --- --- --- --- --- --- ---. --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ESP ( W..) High-Static Belt Drive Two-Speed at High Speed Down Shot Turns Open 0 M BHP M BHP M BHP M BHP M BHP M BHP 0. --- --- --- --- --- --- --- --- 9.9 0.9.0 --- --- --- --- --- --- 09. 0.7 0.. --- --- --- ---.7 0.9. 9.9. --- --- 9.0 0. 9.0 0.0 --- ---..90.. --- --- --- --- --- ---. 99. 9.00 --- --- --- --- --- --- --- ---.0..7 --- --- --- --- --- --- --- ---. 0.9 --- --- --- --- --- --- --- --- --- --- ESP ( W..) Two-Speed Belt-Drive at High Speed Horizontal Turns Open 0 M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP M RPM BHP 0. --- --- --- --- --- --- --- --- --- 9 77. 0 9. 70 0.97 0. --- --- --- --- --- --- 7. 99 77.9 9 --- --- --- 0. --- --- ---.9 9 7. 7 7.09 --- --- --- --- --- --- 0. 7. 79.7 --- --- --- --- --- --- --- --- --- --- --- --- 7 77.9 --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ESP ( W..) High-Static Belt Drive Two-Speed at High Speed Horizontal Turns Open 0 M BHP M BHP M BHP M BHP M BHP M BHP 0. --- --- --- --- --- --- --- ---.0 0.9.0 --- --- --- --- --- ---..79 0.7. --- --- --- --- 9. 7.0 70..0. --- ---.7 07.7 7.7 07... 0. 9. 90. --- --- --- ---. 9.77.9 --- --- --- --- --- --- --- ---.0 7. --- --- --- --- --- --- --- --- --- ---..9 --- --- --- --- --- --- --- --- --- --- Notes Assume dry coil with filter in place; M correction for wet coil = % Any adjustment made to the blower should not cause the motor to draw more than the motor rated RLA. Applications that exceed the above could require a larger motor. Minimum rated SM is 0 per ton. www.daikinac.com SS-DG7

Airflow Data ½ Tons ESP ( W..) Two Speed Belt Drive at High Speed Down Shot Turns Open 0 M BHP M BHP M BHP M BHP M BHP M BHP 0. 7.07.0 007. 9.. 97. 0. 7. 9..9 7. 9. --- --- 0. 79. 0.0 099.7 7. --- --- --- --- 0. 7.9 7.77. --- --- --- --- --- ---.0 9.0 --- --- --- --- --- --- --- --- --- --- ESP ( W..) High-Static Belt Drive Two-Speed at High Speed Down Shot Turns Open 0 M BHP M BHP M BHP M BHP M BHP M BHP 0. --- --- --- --- --- --- 0..9 0.0.0 --- --- 0. 9. 7.0 099.7 77.. 7.7 7.7.0 07.7 9.9 --- ---..7.7 00.90. --- --- --- ---..97 9.0. --- --- --- --- --- ---. 9..7 --- --- --- --- --- --- --- ---.0.7 --- --- --- --- --- --- --- --- --- --- ESP ( W..) Two Speed Belt Drive at High Speed Horizontal Turns Open 0 M BHP M BHP M BHP M BHP M BHP M BHP 0. 99.99 7.. 0.9 9.9. 0..7. 0.9 0.70. --- --- 0. 7. 009..7 9.0 --- --- --- --- 0. 0. 07. --- --- --- --- --- --- --- ---.0 9.0 --- --- --- --- --- --- --- --- --- --- ESP ( W..) High-Static Belt Drive Two-Speed at High Speed Horizontal Turns Open 0 M BHP M BHP M BHP M BHP M BHP M BHP 0...9 7. 0..7..0 0..9.0 7...0..9 9. 09.9 79. 0.70 --- ---. 07.. 7.. --- --- --- ---.. 79.. --- --- --- --- --- ---. 7.0 77.0 --- --- --- --- --- --- --- ---.0.7 --- --- --- --- --- --- --- --- --- --- Notes Assume dry coil with filter in place; M correction for wet coil = % Any adjustment made to the blower should not cause the motor to draw more than the motor rated RLA. Application that exceed the above could require a larger motor. Minimum rated SM is 0 per ton. Airflow Pressure Drop of Downflow Economizer for 7. to. Ton Rooftop Units (00% Return Air) SM 000 00 000 00 000 00 000 00 in. WG 0.0 0.0 0.0 0.09 0. 0. 0. 0.9 SS-DG7 www.daikinac.com 9

rankcase Heater, High Efficiency MERV Air ilter Option High Efficiency MERV Air ilter Option 0.0 landers Pre Pleat M Air Velocity vs Resistance (Test Size: " x " x " High apacity) 0. 0.0 " Deep Resistance (in. w.g.) 0. 0.0 0. 0.0 0. 0.0 0.0 0.00 0 00 00 00 00 00 00 700 Air Velocity (PM) Tonnage: ilter Nominal Size: Part Number: Order QTY: 7. x 0 x 00L000 7.(HP),., 0 X X 00L000. 0 x 0 x 00L000 x 0 x 00L000 rankcase Heater Selection Table ompressor Voltage rankcase ZP/Z ompressor Diameter 0V 0V 7V Heater Watts -." 0R0000S 0R000S 0R000S 0 9-./7." 00L0007S 00L000S 00L0009S 70 0-7 9. 00L0000S 00L000S 00L000S 90 D* Tonnage ompressor Voltage 0V 0V 7V rankcase Heater Watts 7. Ton-. Ton 00L0007S 00L000S 00L0009S 70 *Includes,G&H models. 0 www.daikinac.com SS-DG7

7½ Tons Model Number ½ Tons Electrical Rating ompressor ircuit ompressor ircuit Outdoor an Motor Indoor an Motor Optional Powered onvienience Outlet Power Supply RLA LRA RLA LRA QTY HP LA Type HP LA LA MA MOP DG090***W 0/0--0.... 0.. -speed High Static Belt Drive.00.0 DG090***V 0/0--0.... 0.. -speed Belt Drive.00.0 DG090***W 0--0..0..0 0. 0.7 -speed High Static Belt Drive.00.9 DG090***V 0--0..0..0 0. 0.7 -speed Belt Drive.00.9 DG090***7W 7--0..0..0 0. 0. -speed High Static Belt Drive.00. DG090***7V 7--0..0..0 0. 0. -speed Belt Drive.00. Model Number Electrical Rating ompressor ircuit ompressor ircuit Outdoor an Motor Indoor an Motor -. /. 0 / 0 7. /.. /.9 0 / 0 -. /. 0 / 0 7. /.. /.9 0 / 0 -.0 0.. -.0 0.. -...0 0 -...0 0 Optional Powered onvienience Outlet Power Supply RLA LRA RLA LRA QTY HP LA Type HP LA LA MA MOP DG0***W 0/0--0. 9.0. 9.0 0.. -speed High Static Belt Drive.00.0 DG0***V 0/0--0. 9.0. 9.0 0.. -speed Belt Drive.00.0 DG0***W 0--0..0..0 0. 0.7 -speed High Static Belt Drive.00.9 DG0***V 0--0..0..0 0. 0.7 -speed Belt Drive.00.9 DG0***7W 7--0.0.0.0.0 0. 0. -speed High Static Belt Drive.00. DG0***7V 7--0.0.0.0.0 0. 0. -speed Belt Drive.00. Electrical Data - 7½ & ½ Tons -. /. 0 / 0 7. /.. / 7.9 0 / 0 -. /. 0 / 0 7. /.. / 7.9 0 / 0 -. 0..9 -. 0..9-7. 0. 9. - 7. 0. 9. SS-DG7 www.daikinac.com

Electrical Data - 0 & ½ Tons 0 Tons Model Number Electrical Rating ompressor ircuit ompressor ircuit Outdoor an Motor Indoor an Motor Optional Powered onvienience Outlet Power Supply RLA LRA RLA LRA QTY HP LA Type HP LA LA MA MOP DG0***W 0/0--0.0 0.0.0 0.0 0..0 -speed High Static Belt Drive.00.0 DG0***V 0/0--0.0 0.0.0 0.0 0..0 -speed Belt Drive.00. DG0***W 0--0 7..0 7..0 0. 0.9 -speed High Static Belt Drive.00. DG0***V 0--0 7..0 7..0 0. 0.9 -speed Belt Drive.00.0 DG0***7W 7--0.7.9.7.9 0. 0.7 -speed High Static Belt Drive.00. DG0***7V 7--0.7.9.7.9 0. 0.7 -speed Belt Drive.00. -.9 /.9 0 / 0 7. /.. / 0. 70 / 70 -. /. 0 / 0 7. /.. /. 0 / 0 -. 0. 9. -... 0-9...0 -. 0. 9. 0 ½ Tons Model Number Electrical Rating ompressor ircuit ompressor ircuit Outdoor an Motor Indoor an Motor Optional Powered onvienience Outlet Power Supply RLA LRA RLA LRA QTY HP LA Type HP LA LA MA MOP DG0***W 0/0--0. 9.0. 9.0 0..0 -speed High Static Belt Drive.00.0 DG0***V 0/0--0. 9.0. 9.0 0..0 -speed Belt Drive.00 9. DG0***W 0--0 0. 7.0 0. 7.0 0. 0.9 -speed High Static Belt Drive.00. DG0***V 0--0 0. 7.0 0. 7.0 0. 0.9 -speed Belt Drive.00. DG0***7W 7--0 7.7.0 7.7.0 0. 0.7 -speed High Static Belt Drive.00. DG0***7V 7--0 7.7.0 7.7.0 0. 0.7 -speed Belt Drive.00. -. /. 90 / 90 7. /. 7.7 / 7.0 90 / 90 -. /. 0 / 0 7. /. 70. / 70. 90 / 90 -. 0.. - 9. 0.. 0 -.9 0.. 0 -... 0 www.daikinac.com SS-DG7

Dimensions TOP VIEW LUE / VENT OUTLET..9.7 0.9 GAS LINE ENTRANE. 99.90 RONT VIEW OMBINATION AIR INLET (GAS UNIT) ALL DIMENSIONS GIVEN ARE IN INHES ALL DIMENSIONS AND SPEIIATIONS ARE SUBJET TO HANGE WITHOUT NOTIE D*090-0*** 7. THRU. TON OMMERIAL "A" MODEL TONNAGE "A" "B" 7. TON OMMERIAL GAS, HT MP, AIR ONDITIONER.9 0.0. TON OMMERIAL GAS, HT MP, AIR ONDITIONER.9 0.0 0 TON OMMERIAL GAS, HT MP, AIR ONDITIONER.9 0.0. TON OMMERIAL GAS, HT MP, AIR ONDITIONER.9.0 SUPPLY AIR DUT ONDENSATE DRAIN OUTLET DISONNET SWITH RETURN AIR SUPPLY.7..7 "B".0. 9. 7...70.90.7. LITING SHAKLE HOLES BOTH SIDES AND ENDS RIGHT END VIEW ½ ton uses grille SS-DG7 www.daikinac.com

Unit learances Maintain an adequate clearance around the unit for safety, service, maintenance, and proper unit operation. Leave a clearance of " on all sides of the unit for possible compressor removal or service access, and to ensure proper ventilation and condenser airflow. Do not install the unit beneath any obstruction. Install the unit away from all building exhausts to inhibit ingestion of exhaust air into the unit s fresh-air intake. " " " " Electrical Entrance Locations 7¾ / DIMPLES Dimples Mark MARK Drill Locations DRILL LOATIONS HIGH High-Voltage Entrance ENTRANE 0 0/ LOW Low-Voltage Entrance ENTRANE ½ Power and Low-Voltage Block Locations www.daikinac.com SS-DG7

Roof urb Installation Rigging Provisions for forks have been included in the unit base frame. No other fork locations are approved. Unit must be lifted by the four lifting holes located at the base frame corners. Lifting cables should be attached to the unit with shackles. The distance between the crane hook and the top of the unit must not be less than 0. Two spreader bars must span over the unit to prevent damage to the cabinet by the lift cables. Spreader bars must be of sufficient length so that cables do not come in contact with the unit during transport. Remove wood struts mounted beneath unit base frame before setting unit on roof curb. These struts are intended to protect unit base frame from fork lift damage. To remove the struts, extract the sheet metal retainers and pull the struts through the base of the unit. Refer to rigging label on the unit. Important: If using bottom discharge with roof curb, duct-work should be attached to the curb prior to installing the unit. Duct-work dimensions are shown in Roof urb Installation Instructions Manual. Refer to the Roof urb Installation Instructions for proper curb installation. urbing must be installed in compliance with the National Roofing ontractors Association Manual. Lower unit carefully onto roof mounting curb. A While rigging the unit, the center of gravity will cause the condenser end to be lower than the supply air end. Bring condenser end of unit into alignment 0 Y with the curb. With condenser end of the unit resting on curb member and using curb OMPRESS ompressor as a fulcrum, lower opposite end of the unit until entire unit is seated on the curb. When a OMPRESS ompressor rectangular cantilever curb is used, take care to center the unit. heck for proper alignment and orientation of supply and return openings with duct. RETURN Return EVAPAT Evaporator oil OIL G SUPPLY Supply B 9 X D orner & enter-of-gravity Locations Weight Types 7½-Ton Weights (lbs) Rigging Weights ½-Ton & 0-Ton Weights (lbs) ½-Ton Weights (lbs) Weight A 9 Weight B 97 7 Weight 0 Weight D 0 Shipping Weight 7 0 Operating Weight 00 0 To assist in determining rigging requirements, unit weights are shown to the right. Note: These weights are calculated without accessories installed. SS-DG7 www.daikinac.com

Roof urb Installation -D View ⅜ x ⅛ Supply Opening 9¼ ⅝ x ⅜ Return Opening urb installations must comply with local codes and should follow the established guidelines of the National Roofing ontractors Association. Proper unit installation requires that the roof curb be firmly and permanently attached to the roof structure. heck for adequate fastening method prior to setting the unit on the curb. ull perimeter roof curbs are available from the factory and are shipped unassembled. The installing contractor is responsible for field assembly, squaring, leveling, and mounting on the roof structure. All required hardware necessary for the assembly of the sheet metal curb is included in the curb accessory package. Determine sufficient structural support before locating and mounting the curb and package unit. Duct-work must be constructed using industry guidelines. The duct-work must be placed into the roof curb before mounting the package unit. Our full perimeter curbs include duct connection frames to be assembled with the curb. antilevered-type curbs are not available from the factory. ontractor furnishes curb insulation, cant strips, flashing, and general roofing material. Support curbs on parallel sides with roof members. To prevent damage to the unit, the roof members cannot penetrate supply and return duct openings. ¼ Note: The unit and curb accessories are designed to allow vertical duct installation before unit placement. Duct installation after unit placement is not recommended. See the manual shipped with the roof curb for assembly and installation instructions. ⅝ ¾ ⅜ Top View www.daikinac.com SS-DG7

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback