since 1928 ALBIN PUMP ALH HOSE PUMPS ALH Brochure-EE-GB.indd 1 21/07/ 16:34
ALH ALBIN PUMP ALH HOSE PUMPS ALBIN PUMP ALH is a hose pump of the latest design. We have combined the best available materials with smart design solutions in order to maximise running time and minimise maintenance. Two shoes mounted at 1 on a rotating wheel compress successively a reinforced rubber hose that contains a fluid to be pumped. The compression of the hose by the rotating shoes creates continuous suction at the inlet of the pump and pushes the fluid to the outlet of the pump. The pump casing contains a lubricant that reduces friction and insures the best pump performance with a minimum of maintenance. The pumped fluid is in contact only with the interior of the rubber hose, thus permitting the pumping of a wide variety of reactive fluids. This pump summarizes what we at ALBIN PUMP want to achieve : better pump solutions for our customers. Our design enhances the pump s simplicity and robust principle. ADVANTAGES No mechanical seal or stuffing box Robust, entirely of ductile iron Suitable for aggressive or viscous fluids Dosing of very corosive chemicals Fully self-priming up to 9,8 m Damage-free continuous dry running Outlet pressures up to bar Very easy maintenance Visserie en acier inoxydable. Heavy-duty bearings, greased for life Two-year warranty Plug and Play Perfect volumetric flow Reversible flow Close coupled with gearbox protection Low sound level : < db at 1meter EXPERIENCED NEWTHINKER years experience in HOSE PUMP The ALH hose pump is in many ways the future of pumping. The ALH series pump is an extremely reliable pump with a wide performance range, up to 1 m 3 /h and bars, that can handle most fluids in most applications. ALH Brochure-EE-GB.indd 2 21/07/ 16:34
EXPERIENCED NEWTHINKER KEEP IT SIMPLE ALH THE ALH PUMP is very easy to use and maintain and therefore addresses what we at ALBIN PUMP see as two of the key customer issues : the need to lower costs and to reduce downtime. This is done by using a pump without valves, pistons, stators or rotating elements in the fluid.the ALH series is designed to make hose changes quick and easy with no technical knowledge required. The Albin Pump AP in-line pulsation dampener will reduce vibration and water hammers in your piping therefore increasing the hose life. ALBIN ALH HOSE CONSTRUCTION We only work with high quality compounded rubbers, reinforced with 2 to 6 individual layers of braided polyamide and with an outer layer made to strict tolerances to ensure perfect compression. The caracteristics of Albin hoses enable them to last approximately % longer than other hoses on the market. They also fit the majority of other hose pumps. OPTIONS Twinhead pump, several pump bodies inline driven by the same gear motor Special excecutions and different connections such as SMS, Clamp, DIN, ANSI, coupling and cover...etc Pump rollers for pump without lubricant Hose rupture detector and revolution counter ATEX II & I certification ALBIN PUMP HOSE For the hose inner layers, 6 materials are available to suit the diversity of the pumped fluids : NR > Natural rubber (white marking) NBR > Buna (yellow marking) NBR Food* approuved FDA >Buna (white & yellow marking) EPDM (red marking) HYPALON* (blue marking) VITON/FKM* (purple marking) *Any other hoses material requirements TYPICAL APPLICATIONS WATER TREATMENT lime cream, ferrous chloride, activated carbon, reagent feed, coagulant, floculate dispersion, alum, sludge and foams. MINERAL PROCESSING sludge with viscosity up to 000 Cps, clay up to 0g/l, particle size: mm, lead sulfate,pyrite, SABX, cyanide, various acids. CERAMIC barbotine, mould filling, filter press feeding. BUILDING fibrous mortar, plaster, light concrete, cement flooring. CHEMICAL INDUSTRY various acids, PVDF latex, alcohol, soap, non aromatic solvents. FOOD INDUSTRY tomato sauce, mash potatoes, gelatin, beer yeast, fish paste, olive oil, wine. PAINT water based paint, acrylics, pigments, ink, wall coating. PAPER MILLS latex, kaolin, paper waste sludge, various chemical dosing. AGRICULTURE manure, fertilizer. SUGAR MILLS molasse, liquid sugar and various chemicals. ALH Brochure-EE-GB.indd 3 21/07/ 16:34
ALH TECHNICALS CHARACTERISTICS L M N 3 LOBES D C ALH 0 - O 4 x K 2 LOBES H H A B E P I J F G L D C M N O ALH 2-4 x K E H H A B P I F J G O M N L D C ALHX - 12 4xK E H H A B P I F DIMENSIONS J G ALL DIMENSIONS AND TECHNICAL DATA IS SUBJECT TO CHANGE WITHOUT NOTICE TYPE A B C D E F G H I J K L M N O (Brides ISO) P ALH 0 3, 1 226 9 26 2 2 33, 2 2 4xø9-46, 34, ø16 * 6 81,2 ALH 3, 1 226 9 26 2 2 33, 2 2 4xø9-46, 34, ø16 * 6 81,2 ALH 73 193 296 14 322 2 2 1,7 0 3 4xø13-49 3, ø * 68,8 124,7 ALH 73 193 296 14 322 2 2 1,7 0 3 4xø13-49 3, ø2 * 68,8 124,7 ALH 2 9 262 3, 1 416 3 31 1 0 4xø13-6 69 DN2 PN16 61 1 ALH 32 122, 3 43, 238 2, 426 476 7,7 7 8 4xø13-83 89 DN32 PN16 9 7,7 ALH 122, 3 43, 238 2, 426 476 7,7 7 8 4xø13-83 89 DN PN16 9 7,7 ALHX 1 4 0 291 616 3 4 1 8 9 4xø19-7 86 DN PN16 87 1 ALH 164, 4 17, 3 1, 13 93 186, 9 4xø19-94, 2 DN PN16 2 26, ALH 6 164, 4 17, 3 1, 13 93 186, 9 4xø19-94, 2 DN6 PN16 2 26, ALHX 4 746 4 473 04 6 2 12 4xø19-129 123 DN PN16 7 2 ALH 262 876 3 13 6 8 34 10 4xø27-1, 142 DN PN16 2 34 ALH 0 0 887 68 16 8 9 4 10 00 4xø27-149 174 DN0 PN16 29 4 ALH 12 263, 1273 38 78 17 00 0 10 00 4xø27-0 232 DN12 PN16 6 0 ALH Brochure-EE-GB.indd 4 21/07/ 16:34
FLOW TABLE (L/H) TECHNICALS CHARACTERISTICS ALH TYPE Rpm Rpm Rpm Rpm Rpm 0 Rpm 1 Rpm 1 Rpm ALH 0 (3 lobes) 3.4 6.8 13.6.4 Continuous use (L/h) ALH (3 lobes) ALH 1 1 1 Intermittent use(l/h) ALH 0 0 0 0 0 0 ALH 6 1 3 0 6 8 9 ALH 2 0 0 0 1 0 1 0 2 000 2 0 2 0 Occasional use (L/h) < 1 hour/day ALH 32 37 7 1 0 2 2 3 000 3 7 4 0 2 ALH 6 1 1 2 3 3 4 6 6 8 7 0 8 1 ALHX 0 1 0 3 0 4 0 6 0 8 000 ALH 17 3 0 7 000 0 14 000 17 0 ALH 6 4 0 9 0 13 0 18 0 23 000 TYPE Rpm Rpm Rpm 3 Rpm Rpm 4 Rpm Rpm ALHX 0 000 16 0 19 2 22 000 24 7 27 0 ALH 7 000 14 000 21 000 24 0 28 000 31 0 3 000 ALH 0 12 000 24 000 36 000 42 000 48 000 4 000 ALH 12 22 000 44 000 66 000 77 000 88 000 ALBIN ALHS SERIE For customers who require a long shaft technology, ALBIN PUMP has also developed the ALHS series. These pumps are equipped with a removable bearing case for easy bearing maintenance and can be converted into a close coupling ALH type pump at any time. HOW TO USE THE PUMP CURVES P installed motor (Kw) 0. FLOW CURVE ALH PUMP - ALBIN ALH PUMP 1 - Select the required flow. This gives you the required pumpspeed. 2 - Move upwards to the calculated discharge pressure. 3 - Move to the left for the installed motor power. 4 - Determine the fluid s max. temperature. - Move to the left to the calculated discharge pressure. 6 - Move downwards to determine your maximum allowed pump speed for the fluids temperature. 3 Pump speed (rpm) 0 1 1 0 Bars 4 2 Continuous service Intermittent service* 24/24h 1 6 C C 4 7 1 13 1 16 1 ALH Brochure-EE-GB.indd 21/07/ 16:34
ALH FLOW CURVES ALBIN ALH 0. ALH 0 (3 lobes) ALH (3 lobes) C C 0.18 C C 0.12 3.4 6.8.2 13.6 16.9.4 0. 0. ALH ALH C C C C 0 1 1 0 1 1 4 7 1 13 1 16 1 0 1 0 2 0 3 0 4 0 0 0. 2.2 ALH ALH 2 Bars Bars 7. C 1. C C 1.1 C 0 1 1 0 1 1 1 1 8 1 2 3 42 9 6 76 8 93 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 2.2 2.2 ALH 32 Bars Bars 7. ALH Bars Bars 7. C 1. 1. C 1.1 C C 1.1 0 1 1 1 1 0 1 1 1 1 0.38 0.7 1.13 1. 1.88 2.2 2.63 3.0 3.38 3.7 4.13 4. 4.88.2 0.9 1.17 1.7 2.34 2.92 3.1 4. 4.68.27.8 6.44 7.02 7.61 8.19 * Intermittent use : Minimum of 1 hour stop after 2 hours use * Occasional use : Maximum 1 hour per day ALH Brochure-EE-GB.indd 6 21/07/ 16:34
FLOW CURVES ALBIN ALH ALH ALHX ALH Bars Bars 7. C 3. C 4 0 1 1 0.8 1.6 2.4 3.2 4 4.8.6 6.4 7.2 8 8.8 9.6 1.7 3..2 7 8.7. 12.2 14.7 7. ALH 6 Bars Bars 7. C ALHX Bars Bars 7. C. C 4 C 2 3 4 2.3 4.6 6.9 9.2. 13.8 16.1 18.4.7 2.7. 8.2 13.7 16. 19.2 22 24.7 27. 18. 18. ALH ALH 0 Continuous use 24/24h Occasionnal* 3. 7. 14 2 17. 21 3 24. 28 4 31. 3 Pump speed (rpm) 6 12 18 24 2 36 3 42 48 4 4 37 ALH 12 Bars Bars 7. C 22 C 2 3 22 33 44 66 77 88 * Intermittent use : Minimum of 1 hour stop after 2 hours use * Occasional use : Maximum 1 hour per day ALH Brochure-EE-GB.indd 7 21/07/ 16:34
ALBIN PUMP SAS ZAC de Fontgrave 267 Montboucher sur Jabron France Tel +33 (0) 4 7 92 92 Fax +33 (0) 4 7 92 info@albinpump.fr www.albinpump.fr For more information about our worldwide locations, approvals, certifications, and local representatives, please visit www.albinpump.com. ALBIN PUMP reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Certified drawings are available upon request. 08 ALBIN PUMP ALH Brochure-EE-GB.indd 8 21/07/ 16:34