IRIU-650 Vertical Machining Center with Gear Box pindle and Box Way Design
2 HWACHEN CATALG : IRIU-650 1
Vertical Machining Center 3 VERTICAL MACHINING CENTER WITH GEAR BX PINDLE AND BX WAY DEIGN The performance you can trust and depend on The guide way design of IRIU-650 vertical machining center incorporates highly rigid box way slide design for all axes for highest consistent work result. The massive torque from the gear-driven spindle delivers powerful performance at low speed, and makes high-speed machining very efficient. 1 Household Items Mold 2 Mold Base 3 43 LCD TV Back Cover / Home appliances / KP4M 4 Caliper Housing / Automobile / FCD-550 3 2 4
4 HWACHEN CATALG : IRIU-650 HIGHET TABILITY FR YUR HEAVY DUTY MACHINING NEED Heavy Duty Machining IRIU-650 vertical machining center has been trusted by the professionals all over the world for more than twenty years. The box way slide design guarantees persistent, quality result every time; the gear driven spindle produces massive amount of torque which provides steady heavy machining performance. Hwacheon's Jacket Circulation cooling method limits thermal displacement and the proprietary il-jet technology cools the bearings directly in a fast spinning spindle to increase the life of the bearings and the moving parts. The machine is designed using 3D simulations and the FEM analysis for powerful yet efficient cutting, Hwacheon's machining software components, a wide selection of options and a list of convenient features will help you to be productive and efficient.
Heavy Duty Machining 5 Box Way Design To limit friction and to increase accurate table feed, the box way design has been used to all axes. The Y-axis slide way has been widened to enhance the support capacity and decrease friction. Precision craping With Hwacheon's 60 years of workmanship, the IRIU-650 boxed ways are scraped to perfection. Precision scraping helps absorb vibration during machining and provide smooth movement and highly precise machining results. pindle Gear Driven The auto-shifting gear spindle delivers high torque cutting performance at extra low speed; while providing excellent performance at high speed operation. Pump pindle Cooling ystem emi-permanent grease lubrication is used for the bearings, the bearing assembly and the gear housing are constantly cooled with circulating oil within the jacket. il Cooler il Tank pindle il(i VG 10 : 5,000rpm) (Hi-YUN : 8,000rpm)
Heavy Duty Machining 6
Heavy Duty Machining 7
8 HWACHEN CATALG : IRIU-650 MACHINING FTWARE + RELIABILITY The Hwacheon Machining oftware Components The Hwacheon's developed machining software monitors different variables related to the work environment and machining conditions automatically makes adjustments for best quality results and optimum work efficiency. HTDC (HDC + HFDC) Hwacheon Thermal Displacement Control ystem (HDC + HFDC) HTDC integrates the Hwacheon pindle Displacement Control system and the Frame Displacement Control ystem. HFDC Hwacheon Frame Displacement Control ystem HFDC is equipped with highly sensitive thermal sensors located at various locations where thermal activity is suspected; monitoring and correcting displacement. HDC Hwacheon pindle Displacement Control ystem When the spindle rotates at high speed, the centrifugal force drives the taper to expand, causing errors in Z axis. HDC constantly monitors the temperature at each spindle region and makes optimal prediction for thermal displacement. The system then makes necessary adjustments and effectively minimizing thermal displacement. tatic displacement compensation The HDC system corrects the Z-axis error occuring from the taper expansion during the spindle's high speed rotation.
The Hwacheon Machining oftware Components 9 PRECIIN + HTLD Hwacheon Tool Load Detect ystem HTLD constantly monitors the tool wear to prevent accidents, which may occur from a damaged tool and help to stop tool wear from deteriorating the workpiece. (The load is measured every 8 msec to ensure accuracy) HECC Hwacheon High-Efficiency Contour Control ystem HECC offers an easy-to-use programming interface for different work -pieces and different processing modes. The system provides a precise, custom contour control for the selected workpiece, while prolonging the life of the machine and decreasing process time. The customizable display provides real-time monitoring and quick access. Program offers different options for different cutting speed and accuracy for roughness and shapes. The customizable display provides real-time monitoring and quick, easy access. The program is executable on an existing NC DATA system and works with the G Code system. PTIMA Cutting Feed ptimization ystem PTIMA utilizes an adaptive control method to regulate the feed rate in real time, to sustain the cutting load during a machining process. As a result the tools are less prone to damage and the machining time is reduced. PEED +
10 HWACHEN CATALG : IRIU-650 UER FRIENDLY DEIGN, A WIDE RANGE F PTINAL FEATURE IRIU-650 vertical machining center offers user friendly design and a wide variety of useful options for practical applications, so you can concentrate on what you do best: creating quality products without losing your valuable time to the worries of machine failure and safety. A wide variety of performance enhancing options are available for faster, more precise machining. Wide Work Area The user-friendly C-type frame structure and wide work area allow for quick, easy access to the workpiece. A large workpiece can be easily loaded and unloaded by crane. Auto Measurement ystem (ption) When the machine begins to work, the measurement system automatically measures the workpiece reference and the tool, and makes necessary adjustment. This system saves machining time and guarantees high quality result every time regardless of the machinist's skill and because the system constantly monitors the tools and the workpiece for any abnormality, potential machine-related accidents can be prevented. The system integrates perfectly with other equipment to make your automated production line more productive and efficient.
Product Data 11 Product Data * Unit: mm(inch) 2,080(81.89 ) 750(29.53 ) 1,060(41.73 ) 1,060(41.73 ) 2,755(108.47 ) 1,255(49.41 ) Length=4,280(168.5 ) Top Width=4,010(157.87 ) 855(33.66 ) Door pen : 1,670(65.75 ) Packing tate=2,870(112.99 ) 910 (35.83 ) 1,595(62.8 ) 2,970(62.8 ) 1,700(62.93 ) 2,885(113.58 ) Height= 3,210(126.38 ) 4,460(175.59 ) Front 320(12.6 ) Right side pindle Power Torque Diagram tandard (5,000rpm) ption (8,000rpm) Low speed (0~500) Middle speed (501~2,000) High speed (2,001~5,000) Low speed (0~2,000) High speed (2,001~8,000) Gear shifting Gear shifting Gear shifting 1200 1,145Nm(30min, 60%) 928Nm(Cont.) 30 400 316Nm(30min, 60%) 300 256Nm(Cont.) 30 Torque(Nm) 800 400 18.5kW(30min, 60%) 15kW(Cont.) 20 10 Power(kW) Torque(Nm) 200 100 18.5kW(30min, 60%) 15kW(Cont.) 20 15 11.4 10 Power(kW) 0 0 154 500 1000 2000 3000 4000 5000 pindle peed(rpm) 0 559 2000 4000 6000 8000 pindle peed(rpm)
12 HWACHEN CATALG : IRIU-650 Product Configuration Each product can be configured to fit your application. IRIU-650 5,000rpm 8,000rpm With ATC (24-tools) Without ATC (N) 18.5 / 15kW BT - 50 Machine pecifications ITEM IRIU-650 5,000 5,000N 8,000 8,000N Travel troke (X / Y / Z) mm(inch) 1,300 (51.18 ) / 650 (25.59 ) / 650 (25.59 ) Distance from Table urface to pindle Gauge Plane mm(inch) 200 (7.87 ) ~ 850 (33.47 ) Distance between Columns to pindle Center mm(inch) 730 (28.74 ) Table Working urface mm(inch) 1,800 (70.87 ) x 650 (25.59 ) Table Loading Capacity kg f(lb f) 1,500 (3,307) Table urface Configuration (T slots WxP No. of slots) mm(inch) 18 (0.71 ) x 125 (4.92 ) - 5ea pindle Max. pindle peed rpm 5,000 8,000 pindle Motor kw(hp) 18.5 (25) / 15 (20) Type of pindle Taper Hole - I#50, 7 / 24 Taper (BT-50) pindle Bearing Inner Diameter mm(inch) Ø100 (Ø3.94 ) Method of pindle Lubrication & Cooling - Grease Lub. + Jacket Cooling Jet Lub. + Jacket Cooling Feedrate Rapid peed (X / Y / Z) m/min(ipm) 15 (591) / 15 (591) / 12 (472) Feedrate (X / Y / Z) mm/min(ipm) 1 (0.04) ~ 12,000 (472) ATC Type of Tool hank - BT-50 (pt.:cat-50) Type of Pull tud - 90 Type (BT-50) Tool torage Capacity ea 24-24 - Max. Tool Diameter [Without Adjacent Tools] mm(inch) Ø110 (4.33 ) / Ø110 (4.33 ) / - Ø220 (8.66 ) Ø220 (8.66 ) - Max. Tool Length mm(inch) 350 (13.78 ) - 350 (13.78 ) - Max. Tool Weight kg f(lb f) 15 (33.07) - 15 (33.07) - Method of Tool election - Memory random - Memory random - Method of peration (Magazine / wing Arm) - Geared Motor / Geared Motor - Geared Motor / Geared Motor - Motor Feed Motor (X / Y / Z) kw(hp) 4.0 (5.5) / 4.0 (5.5) / 7.0 (9.5) Coolant Motor (pindle / Chip flushing) kw(hp) 0.4 (0.55) / 0.9 (1.24) pindle Cooler (50 / 60Hz) Inverter Type kw(hp) 1.86 / 2.09 (2.48 / 2.79) 5.0 / 5.6 (6.67 / 7.47) Power ource Electric Power upply kva 40 Compressed Air upply (Pressure x Consumption) - 0.5 ~ 0.7MPa x 1,230Nl/min Tank Capacity pindle Cooling / Lubrication l(gal) 40 (10.57) / 12 (3.17) 60 (15.85) / 12 (3.17) Coolant l(gal) 600 (158.5) Machine ize Height mm(inch) 3,210 (126.38 ) Floor pace (Length x Width) mm(inch) 4,280 (168.50 ) x 4,010 (157.87 ) Weight kg f(lb f) 14,200 (31,306) 13,700 (30,200) NC Controller Fanuc 31i-B
Machine pecifications 13 tandard and ptional Product Components tandard Accessories ptional Accessories Adjust Bolt, Block & Plate Workpiece Coordinate ystem (48ea) Air Dryer ignal Lamp (R / G / Y, 3 Color) Air Blower 2 tep Transmission pindle (8,000rpm) Air Gun pindle Through Coolant (30bar, 70bar) Base Around plash Guard 3 tep Transmission pindle (5,000rpm) Auto Door - In case of Full cover required (emi Cover) 10.4 Color LCD Base Around plash Guard (Full Cover) Tool Life Management Coil Conveyor (3ea) Cutting Feed ptimization ystem (PTIMA) Coolant Gun Tool Measuring ystem-renishaw / Blum Coolant ystem Hwacheon Efficient Contour Control ystem Data erver Interface (Touch Type, Laser Type) Door Interlock (HECC) Data erver (256MB / 1,024MB) Transformer Lubrication ystem Hwacheon Tool Load Detect ystem (HTLD) Lift Up Chip Conveyor Workpiece Measuring ystem Renishaw / Blum MPG Handle (1ea) Hwacheon Artificial Intelligence Control (Hinge Type, craper Type) (Touch type) peration Manual & Parts List ystem (HAI) 200 Block Linear cale (X / Y / Z) 4-axis Interface Pneumatics ystem Manual Guide i Hwacheon Thermal Displacement Rigid Tapping MPG Handle (3ea) Control ystem (HTDC) ignal Lamp (R / G, 2 color) Nano moothing Interpolation - Hwacheon pindle Displacement Control ystem (HDC) + pindle Cooler NURB Interpolation - Hwacheon Frame Displacement Control ystem (HFDC) Tool Kit & Box il kimmer Hwacheon Artificial Intelligence Control ystem Work Light il Mist (emi Dry Cutting ystem, Eco Booster) (HAI) 600/1000 block NC pecifications [Fanuc 31i-B] ITEM PECIFICATIN Controlled axis Controlled axis 3-Axes Controlled axis 5-Axes (Max.) imultaneously controlled axes 3-Axes imultaneously controlled axes 4-Axes (Max.) Least input increment 0.001mm, 0.001deg, 0.0001inch Least input increment 1 / 10 0.0001mm, 0.0001deg, 0.000001inch inch/metric conversion G20, G21 tore stroke check 1 / 2 Mirror image tore pitch error compensation Backlash compensation peration Automatic & MDI operation DNC operation by memory card PCMCIA card is required Program number search / equence number search Dry run, single block Manual handle feed / Feed rate 1 Unit / x1, x10, x100 Interpolation function Positioning / Linear interpolation / Circular interpolation / Dwell (Per seconds) G00 / G01 / G02,G03 / G04 Cylindrical interpolation 4-axis interface option is required Helical interpolation Circular interpolation plus max.2axes linear interpolation Reference position return check / Return G27 / G28, G29 2nd reference position return / kip G30 / G31 Feed function Rapid traverse override F0, F25, F50, F100 Feedrate (mm/min) Feedrate override 0 ~ 150% Jog feed override / verride cancel 0 ~ 4,000mm/min / M48, M49 Program input Tape code EIA R244 / I840 ptional block skip 1ea Program number search 4-Digits equence number N5-Digits Decimal point programming Coordinate system setting G92 Workpiece coordinate system G54 ~ G59 Workpiece coordinate system preset Addition of workpiece coordinate pair 48ea Addition of workpiece coordinate pair 300ea Manual absolute on and off Chamfering / Corner R Programmable data input G10 ub program call 10 folds nested Custom macro B Addition of custom macro common variables #100 ~ #199, #500 ~ #999 Canned cycles for drilling mall-hole peck drilling cycle Automatic corner override Feedrate clamp based on arc radius ITEM ㅡ : Not available : tandard : ption PECIFICATIN caling, Programmable mirror image Coordinate system rotation Tape format for fanuc series 15 Manual Guide i pindle speed function pindle serial output pindle override 50-120% pindle orientation Rigid tapping Tool function / compensation Tool function T4 - digits Tool offset pairs ±6 - digits 200ea Tool offset pairs ±6 - digits 400ea, 999ea Tool offset memory C Tool length compensation / Tool length measurement Cutter compensation C Tool life management Editing operation Part program storage length / Number of register able programs 256kB / 500ea Part program storage length / 512kB / 1,000ea Number of register able programs 1MB / 1,000ea, 2MB / 1,000ea Background editing Extended part program editing Play Back etting and display Clock function elf-diagnosis function / Alarm history display Help function / Graphic function Run hour and parts count display Multi-language display English, German, French, Italian, Chinese, panish, Korean, Russian Portuguese, Polish, Hungarian, wedish Data input / output Reader / Puncher interface CH1 R232C Data server 256MB / 1,024MB Ethernet interface Memory card interface Auto data backup RAM+Part Program thers Display unit 10.4 Color LCD HWACHEN Artificial Intelligence Hwacheon Artificial Intelligence Control ystem (HAI) 200 block Hwacheon Artificial Intelligence Control ystem (HAI) 600 / 1000 block Hwacheon Efficient Contour Control ystem (HECC) Hwacheon Tool Load Detect ystem(htld) Cutting Feed ptimization ystem (PTIMA) Hwacheon Thermal Displacement Control ystem (HTDC) 4- Axis interface function ption Controlled axes / imultaneously controlled axes / Control axis detach
Hwacheon Global Network Hwacheon Headquarters Hwacheon Europe Hwacheon Asia Hwacheon America Please call us for product inquiries. www.hwacheon.com The product design and specifications may change without prior notice. Read the operation manual carefully and thoroughly before operating the product, and always follow the safety instructions and warnings labels attached on the surfaces of the machines. HEAD FFICE HWACHEN MACHINE TL C., LTD 976-1, JANGDEK-DNG GWANGAN-GU, GWANGJU, KREA TEL: +82-62-951-5111 FAX: +82-62-951-0086 EUL FFICE 1022-7, BANGBAE-DNG, ECH, EUL, KREA TEL: +82-2-523-7766 FAX: +82-2-523-2867 UA HWACHEN MACHINERY AMERICA, INC. 555 BND TREET, LINCLNHIRE, ILLINI, 60069, UA TEL: +1-847-573-0100 FAX: +1-847-573-9900 INGAPRE HWACHEN AIA PACIFIC PTE. LTD. 21 BUKIT BATK CRECENT, #08-79 WCEGA TWER INGAPRE 658065 TEL: +65-6515-4357 FAX: +65-6515-4358 GERMANY HWACHEN MACHINERY EURPE GMBH JEF-BAUMANN TR. 25, 44805, BCHUM, GERMANY TEL: +49-2349-128160 FAX: +49-2349-1281660 HC-M256-R2.5-201408