NEM LMPS JI PNEL MOUNTING WELDNUT "JI" STYLE OVER LMPS Plated Steel T304 Stainless Steel T316 Stainless Steel "JI" OVER LMP SSEMLY pplication "JI" FabTech's Style "JI" over Style lamp over is attached lamp is with attached a screw with a screw to the tapped clamp bracket of "JI" industrial electrical enclosures to seal the cover to the box. atalog No. JH-20010 JH-20011 JH-20020 JH-20030 Description over lamp - Pltd. Steel - Y over lamp - Pltd. Steel - over lamp - T304SS over lamp - T316SS Design When attached, the clamp engages the formed lip of the enclosure cover. When the screw is tightened, the clamp secures the cover to the box. The clamp has an oblong slot which permits the clamp to swing out of the way when the screw is loosened..265 x.625 SLOT.074.835.250 Materials vailable in plated steel, T304 and T316 stainless steel. Finishes Plated steel clamps are zinc plated (clear) and zinc plated with a yellow dichromate rinse. Stainless steel clamps, both T304 and T316 are polished to a bright finish. 1.265 "JI" OVER LMP.555 "JI" STYLE LMP RKETS atalog No. Description JH-20040 over lamp racket - 1/4 28 - Steel - w/proj. JH-20041 over lamp racket - 1/4 20 - Steel - w/proj. JH-20042 over lamp racket - 1/4 28 - Steel JH-20043 over lamp racket - 1/4 20 - Steel JH-20060 over lamp racket - 1/4 28 - T304SS - w/proj. JH-20061 over lamp racket - 1/4 20 - T304SS - w/proj. JH-20062 over lamp racket - 1/4 28 - T304SS JH-20063 over lamp racket - 1/4 20 - T304SS JH-20070 over lamp racket - 1/4 28 - T316SS * JH-20080 over lamp racket - 1/4 28 - luminum JH-20081 over lamp racket - 1/4 20 - luminum.256.250 TYP. WELD PROJETION 1/4-20 OR 1/4-28 TPPED HOLE 1.250 L.750 81º "JI" LMP RKET.684.104.584 Design pplication The FabTech's lamp "JI" racket Style lamp is available racket with is intended 1/4 20 to and be welded 1/4 28 threads, to the enclosure except to T316 accept stainless the over steel lamp. and aluminum has 1/4 28 threads only. Weld projections are optional. Design * T-316 MTERIL IS MRKED The lamp racket is available with 1/4 20 and 1/4 28 threads, except T316 stainless steel and aluminum has 1/4 28 threads only. Weld projections are optional. Materials vailable in steel, 5052 H32 aluminum, T304 and T316 stainless steel*. Finishes Steel lamp rackets are uncoated, aluminum lamp rackets have a mill finish and both T304 and T316 lamp rackets are polished to a bright finish. 482 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
NEM LMPS "JI" QUIK RELESE LMP LMP SREW (MUST E ORDERED SEPRTELY) MTG. SE TH LEVER LMP RKET (MUST E ORDERED SEPRTELY) SHIM WSHERS "JI" QUIK RELESE LMP KIT pplication The "JI" Quick Release lamp is intended to be fastened to the existing tapped clamp bracket of a "JI" junction box or "JI" wireway in place of the standard screw down clamp. It provides quick access to the box and wireway interiors Design "JI" Quick Release lamps are designed to be replacement parts for the standard "JI" cover clamps. Installation is accomplished by removing the standard cover clamp and then attaching the Quick Release lamp to the clamp bracket using the existing cover clamp screw. vailable in kit form or as individual parts. Kits Each kit contains a "JI" Quick Release lamp, installation instruction sheet and three shim washers which can be used between the clamp and bracket to adjust for proper gasket compression. The kits, as with all kits and installation sheets supplied by FabTech, are Finishes generically marked with part description only. Steel clamps are zinc plated clear. Stainless steel clamps Materials are polished to a bright finish. vailable in steel, T304 and T316 stainless steel*. * T-316 MTERIL IS MRKED Finishes Steel clamps are zinc plated clear. Stainless steel clamps are polished to a bright finish. Plated Steel T304 Stainless Steel T316 Stainless Steel LMP KITS "JI" QUIK RELESE LMP INSTLLED vailable as kits or as individual parts atalog No. Description JH-40155 "JI" Quick Release lamp Kit - T304SS JH-40165 "JI" Quick Release lamp Kit - Pltd. Steel - Y JH-40175 "JI" Quick Release lamp Kit - T316SS * LMP KIT PRTS atalog No. Description JH-40150 "JI" Quick Release lamp - T304SS JH-40160 "JI" Quick Release lamp - Pltd. Steel - Y JH-40170 "JI" Quick Release lamp - T316SS * NH-20140 Washer, 1/4-Thin - T316SS "JI" SREWS (Not supplied w/kit) atalog No. Description JH-20095 Screw - 1/4 28 - Slot - Fillister Head - Pltd. Steel - Y JH-20096 Screw - 1/4 20 - Slot - Fillister Head - Pltd. Steel - Y JH-20097 Screw - 1/4 28 - Slot - Fillister Head - Pltd. Steel - JH-20098 Screw - 1/4 20 - Slot - Fillister Head - Pltd. Steel - JH-20094 Screw - 1/4 28 - Slot - Fillister Head - 18 8SS (T302) JH-20093 Screw - 1/4 20 - Slot - Fillister Head - 18 8SS (T302) JH-20090 Screw - 1/4 28 - Slot - Fillister Head - T316SS "JI" OVER LMP RKETS (Not supplied w/kit) atalog No. Description JH-20040 over lamp racket - 1/4 28 - Steel - w/proj. JH-20041 over lamp racket - 1/4 20 - Steel - w/proj. JH-20042 over lamp racket - 1/4 28 - Steel JH-20043 over lamp racket - 1/4 20 - Steel JH-20060 over lamp racket - 1/4 28 - T304SS - w/proj. JH-20061 over lamp racket - 1/4 20 - T304SS - w/proj. JH-20062 over lamp racket - 1/4 28 - T304SS JH-20063 over lamp racket - 1/4 20 - T304SS JH-20070 over lamp racket - 1/4 28 - T316SS * JH-20080 over lamp racket - 1/4 28 - luminum 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 483
NEM LMPS DOOR LMP SSEMLIES WITHOUT RKET: TYPES 4 ND 12 Saves time and money in your assembly area Steel, T304 and T316 Stainless Steel 1/4 20 and 1/4 28 threads LMP SREW LMP WSHER (THIN) SPRING TYPE PH LMP SSEMLY atalog No. Description NH-40095 N-4-PH lamp ssy. - 1/4 28 - T304SS NH-40055 N-4-PH lamp ssy. - 1/4 28 - T316SS* NH-41045 N-4-PH lamp ssy. - 1/4 28 - T304SS NH-41055 N-4-PH lamp ssy. - 1/4 28 - T316SS* NH-41046 N-4-PH lamp ssy. - 1/4 20 - T304SS NH-41114 N-4-PH lamp ssy. - 1/4 28 - Plated Steel - Y atalog No. NH-40033 NH-40034 NH-40035 NH-40036 NH-40040 NH-40041 NH-40050 NH-40110 NH-40111 NH-40112 NH-40113 NH-40120 NH-40121 Description N-4 lamp ssy. - 1/4 28 - Plated Steel - Y N-4 lamp ssy. - 1/4 20 - Plated Steel - Y N-4 lamp ssy. - 1/4 28 - Plated Steel - N-4 lamp ssy. - 1/4 20 - Plated Steel - N-4 lamp ssy. - 1/4 28 - T304SS N-4 lamp ssy. - 1/4 20 - T304SS N-4 lamp ssy. - 1/4 28 - T316SS* N-12 lamp ssy. - 1/4 28 - Plated Steel - Y N-12 lamp ssy. - 1/4 20 - Plated Steel - Y N-12 lamp ssy. - 1/4 28 - Plated Steel - N-12 lamp ssy. - 1/4 20 - Plated Steel - N-12 lamp ssy. - 1/4 28 - T304SS N-12 lamp ssy. - 1/4 20 - T304SS Note: Prefix NH-40 designates tray pack. N-4 and N-12 assemblies are packed 30 per tray and there are 5 trays per carton. Use prefix NH-41 for layered carton pack. N-4 assemblies are packed 250 per carton, N-12 assemblies are packed 290 per carton. pplication Door FabTech's lamp Door ssemblies lamp ssemblies are intended are to intended be installed to be on installed on existing door clamp brackets of TYPE 4 or 12 enclosures. Design ll parts are assembled using the spring to retain the screw and washer to the clamp. The assemblies are packed in Styrofoam trays or layered in special cartons for ease of storage, disbursement from stock and assembly onto your enclosures. oth 1/4 20 and 1/4 28 threads are standard with FabTech (except T316 stainless steel has 1/4 28 threads only). See individual parts for design Materials ssemblies and dimensional are available data. in all the various metals and finishes except aluminum. The washer and spring are T316 stainless steel* in all assemblies. Materials ssemblies are available in all the various metals and finishes except Finishes aluminum. The washer and spring are T316 stainless steel* in all The assemblies. steel screw and clamp parts of the assembly are available in zinc plated (clear), zinc plated with a yellow dichromate rinse. The stainless Finishes steel clamps are polished to a bright finish. The steel screw and clamp parts of the assembly are available in zinc * T-316 MTERIL IS MRKED plated (clear), zinc plated with a yellow dichromate rinse. The stainless steel clamps are polished to a bright finish. LMP SREW LMP TYPE 4 TYPE 12 WSHER (THIN) SPRING TYPE 4 & TYPE 12 LMP SSEMLIES 484 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
NEM LMPS DOOR LMP SSEMLIES WITH RKET: TYPES 4 ND 12 Saves time and money in your assembly area Steel, T304 and T316 Stainless Steel 1/4 20 and 1/4 28 threads LMP SREW TYPE 4 LMP WSHER (THIN) SPRING LMP RKET TYPE 4 LMP SSEMLY WITH RKET NOTE: RKETS RE ULK PKGED ND SHIPPED SEPRTELY atalog No. NH-40008 NH-40009 NH-40006 NH-40007 NH-40010 NH-40011 NH-40020 NH-40080 NH-40081 NH-40075 NH-40076 Description N-4 lamp and racket ssy. - 1/4 28 - Pltd. Steel - Y N-4 lamp and racket ssy. - 1/4 20 - Pltd. Steel - Y N-4 lamp and racket ssy. - 1/4 28 - Pltd. Steel - N-4 lamp and racket ssy. - 1/4 20 - Pltd. Steel - N-4 lamp and racket ssy. - 1/4 28 - T304SS N-4 lamp and racket ssy. - 1/4 20 - T304SS N-4 lamp and racket ssy. - 1/4 28 - T316SS* N-12 lamp and racket ssy. - 1/4 28 - Pltd. Steel - Y N-12 lamp and racket ssy. - 1/4 20 - Pltd. Steel - Y N-12 lamp and racket ssy. - 1/4 28 - T304SS N-12 lamp and racket ssy. - 1/4 20 - T304SS Note: Prefix NH-40 designates tray pack. N-4 and N-12 assemblies (less racket.) are packed 30 per tray and there are 5 trays per carton. Use prefix NH-41 for layered carton pack. N-4 assemblies (less racket) are packed 250 per carton, N-12 assemblies (less racket) are packed 290 per carton. pplication Ttapped FabTech's Door tapped lamp Door rackets lamp are rackets intended are to intended be welded to be to welded the to the enclosure and the clamp assembly is then attached with the screw. These may be installed on TYPE 4 or 12 enclosures. Design Door lamps are assembled using the spring to retain the screw and washer to the clamp. The assemblies are packed in Styrofoam trays or layered in special cartons for ease of storage, disbursement from stock and assembly onto your enclosures. lamp rackets are shipped in a separate carton. oth 1/4 20 and 1/4 28 threads are standard with FabTech (except Materials T316 stainless steel has 1/4 28 threads only). See individual parts for design Door and dimensional lamp and data. racket assemblies are available in all the various metals and finishes except aluminum. luminum lamp rackets may be purchased Materialsseparately.(see The washer page 13) and The spring washer are and T316 spring are T316 stainless Door lamp steel* and in racket all assemblies. assemblies are available in all the various metals and finishes except aluminum. luminum lamp rackets may be Finishes purchased separately (see page 13) The washer and spring are T316 The stainless steel steel* screw in all and assemblies. clamp parts of the assembly are available in zinc plated (clear), and zinc plated with a yellow dichromate rinse. The Finishes stainless steel lamps and rackets are polished to a bright finish. The steel The screw steel lamp and clamp rackets parts are of supplied the assembly unfinished. are available in zinc plated (clear), and zinc plated with a yellow dichromate rinse. * T-316 MTERIL IS MRKED The stainless steel lamps and rackets are polished to a bright finish. The steel lamp rackets are supplied unfinished. LMP SREW TYPE 12 LMP WSHER (THIN) SPRING LMP RKET TYPE 12 LMP SSEMLY WITH RKET NOTE: RKETS RE ULK PKGED ND SHIPPED SEPRTELY 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 485
NEM LMPS FST OPERTING DOOR LMPS Easy to operate Fits Type 4 and 12 enclosures T304 Stainless Steel T316 Stainless Steel LEVER *SS WSHER atalog No. NH-40150 NH-40151 NH-40160 Description Lever ssembly - 1/4 28 - T304SS Lever ssembly - 1/4 20 - T304SS Lever ssembly - 1/4 28 - T316SS* LEVER SSEMLY 1.750.563.733 atalog No. NH-40230 NH-40231 NH-40240 Description Lever and lamp ssembly - 1/4 28 - T304SS Lever and lamp ssembly - 1/4 20 - T304SS Lever and lamp ssembly - 1/4 28 - T316SS* SS WSHER.813.040.563.281 LEVER SSEMLY pplication Fast FabTech's Operating Fast Operating Lever and Lever Door and lamp Door ssemblies lamp ssemblies are are intended to be installed on the existing clamp brackets of TYPE 4 or TYPE 12 enclosures. WSHER T316SS (THIN).025.531.406.500.266 SEE TYPE 4/4X DOOR LMP FOR DIMENSIONS SPRING, T316SS LEVER ND LMP SSEMLY Design ll parts are assembled using the spring to retain the Lever ssembly, Door lamp and the T316 stainless steel washer. The Lever ssembly is furnished with a special size washer required to facilitate the proper operation of the lever. When the door is closed, the clamp engages the formed lip of the enclosure door. When the lever is depressed, the clamp secures the door in the closed position. The clamp is released by lifting up on the lever. Sealing pressure can be adjusted by rotating the lever when it is in the disengaged position. If you wish to use existing hardware and convert it to the fast operating type, individual lever assemblies may be purchased separately (see top of page). vailable with 1/4 20 and 1/4 28 threads (except T316 stainless steel which has 1/4 28 threads only). Materials vailable T304 stainless steel and T316 stainless steel*. * T-316 MTERIL IS MRKED Finishes Parts are polished to a bright finish. 486 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
NEM LMPS.625.875 2.125.313 L.25 X 1.688 SLOT pplication The Padlock Hasp is intended to be welded to the enclosure door in alignment with the Padlock Staple to provide padlocking capability. May be used on both TYPE 4 and TYPE 12 enclosures. Design The heavy duty construction of this product resists distortion under severe abuse. The slot is slightly oversized to allow greater flexibility when aligning with the Hasp. Steel T304 Stainless Steel atalog No. NH-20260 NH-20280 NH-20290 NH-20300 PDLOK HSP pplication The Padlock Staple is intended to be welded to the enclosure flange in alignment with the Padlock Hasp to provide padlocking capability. May be used on both TYPE 4 and TYPE 12 enclosures. Design Seal provision provided for security. PDLOK HSP Heavy Duty construction Steel T304 Stainless Steel PDLOK STPLE T316 Stainless Steel luminum Description Padlock Staple - Steel Padlock Staple - T304SS Padlock Staple - T316SS* Padlock Staple - 5052 H32 luminum atalog No. NH-20210 NH-20230 NH-20240 NH-20250 T316 Stainless Steel luminum Description Padlock Hasp - Steel Padlock Hasp - T304SS Padlock Hasp - T316SS* Padlock Hasp - 5052 H32 luminum Materials vailable in 12 ga. steel, 12 ga. T304 and T316 stainless steel and.125 5052 H32 aluminum. Finishes Steel Padlock Hasps are uncoated, stainless steel Padlock Hasps are polished to a bright finish. luminum Padlock Hasps have a mill finish..156 SEL PROV. (.125 DI.) PDLOK PROV. 1.250 PDLOK STPLE Materials vailable in 14 ga. steel, 14 ga. T304 and T316 stainless steel and.080 5052 H32 aluminum. Finishes Steel Padlock Staples are uncoated, stainless steel Padlock Staples are polished to a bright finish. luminum Padlock Staples have a mill finish..938.750.313.469 1.125 PDLOK HSP PDLOK HSP ND STPLE SET Order sets and save time PDLOK STPLE PDLOK HSP & STPLE SET * T-316 MTERIL IS MRKED atalog No. NH-40130 NH-40134 NH-40137 NH-40138 Description Padlock Hasp and Staple Set - Steel Padlock Hasp and Staple Set - T304SS Padlock Hasp and Staple Set - T316SS* Padlock Hasp and Staple Set - 5052 H32 luminum 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 487
488 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 489
490 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 491
27 - SERIES Rigid & Spring law Latches Diameter of Max. working load Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes (kg) at max. spring Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) deflection (mm) Strength (kg) /7 /9 27-1123 MS ZN 4.1 200 72.4 22.3 13.3 0.042 001-600, 02-1123, 613/7 SS SS 4.1 300 72.4 22.3 13.3 0.042 03-1123, 07-535 613/9 SS 27-1900 27-623 27-1935 27-1288 27-2370 27-2396 27-1236 MS ZN 4.1 200 72.4 22.3 16.7 0.043 001-600, 02-1123, 613/7 SS SS 4.1 300 72.4 22.3 16.7 0.043 03-1123, 07-535 613/9 SS MS ZN 4.1 45 @ 2.0 90 71.6 34.9 13.9 0.041 613/7 SS 05-623, 06-623 SS 4.1 28 @ 1.5 90 71.6 34.9 13.9 0.041 613/9 SS MS ZN 4.1 54 @ 2.5 90 83.2 34.9 16.2 0.042 613/7 SS 05-623, 06-623 SS 4.1 22 @ 1.5 90 83.2 34.9 16.2 0.042 613/9 SS MS ZN 4.1 27 @ 2.5 90 102.8 34.9 21.4 0.044 613/7 SS 05-623, 06-623 SS 4.1 18 @ 2.5 90 102.8 34.9 21.4 0.044 613/9 SS MS ZN 4.1 40 @ 4.0 80 94.5 22.3 16.4 0.050 613/7 SS SS 4.1 25 @ 2.0 50 94.5 22.3 16.4 0.050 613/9 SS MS ZN 4.1 40 @ 4.0 80 94.5 22.3 16.7 0.051 613/7 SS SS 4.1 25 @ 2.0 50 94.5 22.3 16.7 0.051 613/9 SS MS ZN 4.1 40 @ 4.0 80 94.5 34.9 16.3 0.054 613/7 SS SS 4.1 25 @ 2.0 50 94.5 34.9 16.3 0.054 613/9 SS THPLTES please order separately where required Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) MS ZN 4.1 200 16.5 40.0 11.0 0.010 001-600 SS 4.1 400 16.5 40.0 11.0 0.010 Dimension Guide (approx. sizes mm) Example of how to order: LTH Part No. + Material + Finish + Qty 27-1123 MS ZN 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty 001-600 MS ZN 25 02-1123 MS ZN 4.1 200 37.0 16.0 11.0 0.011 SS 4.1 400 37.0 16.0 11.0 0.011 03-1123 MS ZN 4.1 200 45.0 16.0 15.0 0.014 SS 4.1 400 45.0 16.0 15.0 0.014 07-535 S ZN 4.1 300 30.0 16.0 16.5 0.010 SS 4.1 200 30.0 16.0 16.5 0.010 05-623 MS ZN 4.1 150 31.8 34.9 7.0 0.015 SS 4.1 180 31.8 34.9 7.0 0.015 001-600 07-535 06-623 MS ZN 4.1 150 29.5 34.9 10.3 0.015 SS 4.1 180 29.5 34.9 10.3 0.015 02-1123 03-1123 05-623 06-623 27-1123 & 03-1123 27-1123 & 02-1123 492 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
27-633 27-1570 27-633MSL 27-1162 27-1162/S 27-1620 27-1620/S 27-1836 27-1837 27 - SERIES Spring law Latches 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 493
494 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 495
496 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 497
498 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 499
No. 750-10 Keeper 750 Series No. 750 Ideal for use on heavy gasketed lids. 1/2" adjustment allows for variations in alignment. 1/2" take-up capability. Slim profile. Provision for use of a lockwire to prevent inadvertent opening or tampering. Keeper No. 750-10 Keeper is offered separately. Material: arbon steel zinc-plated. lso available in stainless steel. sk for No. 750-SS10. Plain finish. Weight:.04 lbs. No. 2-750-P No. Material Description Maximum Load Weight 750 Zinc-plated arbon Steel Standard Overcenter Draw Latch 300 lbs..34 lbs. 750-SS Stainless Steel Same as 750 550 lbs..34 lbs. 1-750-M Stainless Steel with Same as 750-SS except furnished w/special Hook 750 lbs..36 lbs. hrome Moly Hook & Detents in nchor Plate 2-750-P Zinc-plated arbon Steel Padlockable Overcenter Draw Latch 300 lbs..36 lbs. 2-750-SSP Stainless Steel Same as 2-750-P 550 lbs..36 lbs. 750-10 Zinc-plated arbon Steel Standard Keeper.04 lbs. 750-SS10 Stainless Steel Same as 750-10.04 lbs. 1324-SO atch for 1323 1323 Latch Eccentric M atch 4-1/2" to 5" length Material: Stamped Stainless Steel Length: 4-1/2" Width: 1.630" Height: 7/8" Mounting Style: Top Mount Fastener Size: #10 Weight:.26 lb 5 1/8 2 7/8 2 1/8 1 5/8 1 1/4 7/8 3/4 500 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
Rigid wire toggle latches PROGRM 6000 No. M-770-SS Electropolished stainless steel draw latch assembly with an adjustable hook assembly. The hook can be adjusted.24" in either direction from the typical length of 1.83." Working load 1500 lbs. and ultimate load of 2,500 lbs. 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 501
60 & 61 - SERIES djustable Latches Diameter of Maximum Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes adjustment Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) (mm) Strength (kg) /7 /9 60-1750 MS ZN/YP 4.1 10 450 98.0 24.2 17.0 0.074 01-655, 02-655, 03-655, 502/7 SS SS 4.1 10 500 98.0 24.2 17.0 0.074 03-1655, 06-655, 007-655 502/9 SS 61-1750 MS ZN/YP 4.1 10 450 98.0 24.2 20.7 0.078 01-655, 02-655, 03-655, SS 4.1 10 500 98.0 24.2 20.7 0.078 03-1655, 06-655, 007-655 502/7 SS 60-1610 MS ZN/YP 4.1 10 450 98.0 40.0 17.0 0.078 01-655, 02-655, 03-655, 502/7 SS SS 4.1 10 500 98.0 40.0 17.0 0.078 03-1655, 06-655, 007-655 502/9 SS 61-1610 MS ZN/YP 4.1 10 450 98.0 40.0 20.7 0.082 01-655, 02-655, 03-655, SS 4.1 10 500 98.0 40.0 20.7 0.082 03-1655, 06-655, 007-655 502/7 SS 60-655M1 61-655M1 60-658M1 61-658M1 MS ZN/YP 4.1 10 350 93.0 40.0 17.0 0.071 01-655, 02-655, 03-655, 502/7 SS SS 4.1 10 400 93.0 40.0 17.0 0.071 03-1655, 06-655, 007-655 502/9 SS MS ZN/YP 4.1 10 350 93.0 40.0 20.7 0.075 01-655, 02-655, 03-655, 502/7 SS SS 4.1 10 400 93.0 40.0 20.7 0.075 03-1655, 06-655, 007-655 MS ZN/YP 4.1 10 250 114.0 40.0 17.0 0.088 502/7 SS 01-658 SS 4.1 10 175 114.0 40.0 17.0 0.088 502/9 SS MS ZN/YP 4.1 10 250-114.0 40.0 20.7 0.092 SS 4.1 10 175-114.0 40.0 20.7 0.092 01-658 502/7 SS THPLTES please order separately where required Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) S ZN/YP 4.1 400 26 40 11.2 0.012 01-655 SS 4.1 300 26 40 11.2 0.012 Dimension Guide (approx. sizes mm) Example of how to order: LTH Part No. + Material + Finish + Qty 60-1750 MS ZN/YP 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty 01-655 S ZN/YP 25 02-655 S ZN/YP 4.1 400 33 16 11.8 0.010 SS 4.1 450 33 16 12.3 0.010 03-655 S ZN/YP 4.1 400 40.2 16 31.7 0.015 SS 4.1 450 40.2 16 32 0.015 03-1655 S ZN/YP 4.1 400 40.2 16 32 0.017 SS 4.1 450 40.2 16 32 0.017 06-655 S ZN/YP 4.1 400 29 40 10 0.012 SS 4.1 300 29 40 10 0.012 01-655 02-655 007-655 S ZN/YP 4.1 300 13 40 16 0.012 SS 4.1 200 13 40 16 0.012 01-658 S ZN/YP 4.1 400 23 40 7.1 0.012 SS 4.1 300 23 40 7.1 0.012 03-655 03-1655 Shown in ZN/YP version 60-655M1SS & 007-655SS 61-1750SS & 02-655SS 61-655M1SS & 01-655SS 06-655 007-655 01-658 502 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
60-1750 61-1750 Shown in ZN/YP version SREW DJUSTMENT SREW DJUSTMENT 60-1610 61-1610 SREW DJUSTMENT SREW DJUSTMENT 60-658 M1 61-658 M1 SREW DJUSTMENT SREW DJUSTMENT 60-655 M1 61-655 M1 SREW DJUSTMENT SREW DJUSTMENT 60 & 61 - SERIES djustable Latches 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 503
Diameter of Max. working load Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes (kg) at max. spring Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) deflection (mm) Strength (kg) /7 /9 640-1000 641-1000 645-1010 646-1010 270-600 MS ZN/YP 4.1 300 99.8 45.2 15.8 0.128 SS 4.1 400 99.8 45.2 15.8 0.137 MS ZN/YP 4.1 300 100.0 45.2 18.0 0.128 SS 4.1 400 100.0 45.2 18.0 0.137 MS ZN/YP 4.1 250 162.8 114.3 18.8 0.330 SS 4.1 375 162.8 114.3 18.8 0.330 MS ZN/YP 4.1 250 162.8 114.3 18.8 0.330 SS 4.1 375 162.8 114.3 18.8 0.330 001-1000 613/7 SS 001-1000 613/7 SS MS ZN/YP 4.1 200 66.9 22.0 18.3 0.044 613/7 SS 001-600 SS 4.1 300 66.9 22.0 18.3 0.044 613/9 SS THPLTES please order separately where required Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) MS ZN/YP 5.1 250 20.0 45.0 15.2 0.007 001-1000 SS 5.1 375 20.0 45.0 15.2 0.007 Dimension Guide (approx. sizes mm) Example of how to order: LTH Part No. + Material + Finish + Qty 640-1000 MS ZN/YP 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty 001-1000 MS ZN/YP 25 001-600 MS ZN/YP 4.1 300 16.5 40.0 11.0 0.007 SS 4.1 400 16.5 40.0 11.0 0.007 001-600 MSZN/YP 001-600 SS The unique PROLTH TM forces a panel or door against a seal, and holds firmly in two planes. safety catch is incorporated, and provision for a padlock is offered. The Junior PROLTH TM is smaller and lighter but uses the same unique principle to close a door or panel and incorporates a simple safety-catch. 001-1000 MSZN/YP 001-1000 SS 641-1000SS & 001-1000SS mounted on a wooden block 640-1000SS 270-600MSZN/YP & 001-600MSZN/YP 641-1000SS & 001-1000SS 641-1000SS & 001-1000SS 504 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
640-1000 MS ZN/YP 641-1000 MS ZN/YP 640-1000 SS 641-1000 SS 001-1000 MSZN/YP 001-1000 SS 640-1000 Safety catch version 641-1000 Padlock version 645-1010 MS ZN/YP 646-1010 MS ZN/YP lso available in stainless steel Junior PROLTH 270-600 MS ZN/YP 270-600 SS 001-600 MSZN/YP 001-1000 SS ProLatch 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 505
Diameter of Ultimate Tensile Strength (kg) Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes version version (approximate sizes) weight order separately where required sealing pins (mm) /7 1 2 3 /9 88-1068 89-1069 90-1090 91-1090 8803-1068 8903-1069 8807-1068 8907-1069 MS ZN/YP 4.1 400 900 400 100.0 45.2 18.0 0.128 502/7 SS SS 4.1 600 900 600 100.0 45.2 18.0 0.137 502/9 SS MS ZN/YP 4.1 400 900 400 100.0 45.2 18.0 0.128 502/7 SS SS 4.1 600 900 600 100.0 45.2 18.0 0.137 502/9 SS MS ZN/YP 4.1 400 900 400 162.8 114.3 18.8 0.330 502/7 SS SS 4.1 600 900 600 162.8 114.3 18.8 0.330 502/9 SS MS ZN/YP 4.1 400 900 400 162.8 114.3 18.8 0.330 502/7 SS SS 4.1 600 900 600 162.8 114.3 18.8 0.330 502/9 SS MS ZN/YP 4.1 400 100 150 106.1 45.2 45.6 0.180 502/7 SS SS 4.1 600 100 150 106.1 45.2 45.6 0.180 502/9 SS MS ZN/YP 4.1 400 100 150 106.1 45.2 45.6 0.175 502/7 SS SS 4.1 600 100 150 106.1 45.2 45.6 0.175 502/9 SS MS ZN/YP 4.1 400 100 100 105.1 45.2 28.0 0.180 502/7 SS SS 4.1 600 100 100 105.1 45.2 28.0 0.180 502/9 SS MS ZN/YP 4.1 400 100 100 105.1 45.2 28.0 0.175 502/7 SS SS 4.1 600 100 100 105.1 45.2 28.0 0.175 502/9 SS Dimension Guide (approx. sizes mm) Example of how to order: THOLT Part No. + Material + Finish + Qty 88-1068 MS ZN/YP 25 8907-1069SS 8803-1068SS The unique THOLT holds firmly in three directions. The integral bolt forces a panel or door to close in. 89-1069SS 88-1068SS 88-1068SS 89-1069SS 506 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
88-1068 89-1069 90-1090 91-1090 Shown in ZN/YP version 8803-1068 8903-1069 8807-1068 8907-1069 atcholt 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 507
OVER-ENTRE FSTENERS HEVY DUTY PPLITIONS This robust catch incorporates a strong coil-spring which gives leveraged over-centre action against a stainless steel rod, mounted on a striker plate, with slotted mounting holes to allow for easy adjustment. 9/02094 locking unit c/w striker plate 9/02096 non-locking unit c/w striker plate leverly designed as a diecast assembly for good appearance, the catch is generally used to secure fabricated covers or access doors on large earthmovers and similar applications. It is available in both locking and non-locking versions. ase-plate is mounted on fixed member, striker plate is mounted on mating panel. The catch body is brought down so that operating 'claw' engages with striker pin, and the pivoted lever-handle is then pressed down to achieve overcentre action, forcing panels tightly together. lack powder-coated as standard. Optionally, clear zinc plated. ORDERING ODE 9/02094 Locking unit, with striker plate, black 9/02094/01 s above, FT 111 9/02096 Non-locking unit, with striker plate, black SPEIFITION. Total Length...212mm. Length to striker pin...120mm. Max width (base)...96mm D. Length (base)...30mm E. Max width (strikers)...93mm F. Hole centres (strikers)...58mm G. Hole centres (base)...75mm H. Hole Sizes (base)... 8.5 dia I. Hole Sizes (striker)... 8.5 x 20mm J. Length (striker)...72mm K. Max height (not shown)...42mm 8850-PK 8851-PK Patent Pending No. 8850/ No. 8851 This 8850 Series draw latch is a die cast draw latch with an adjustable catch offered in a key-locking and non-key-locking version. The product also is offered with a stainless strap for additional security or the rubber strap where more flexibility is required. The design also provides security of unauthorized removal of the mounting fasteners since the mounting locations are not accessible when the latch is clamped down on the key-locking versions. The key-locking versions are provided with one doublebitted key. (Keyed H700D-H749D). No. 8850-PK Non-key-locking with stainless strap. No. 8851-PK Key-locking with stainless strap. No. 1-8850-PK Non-key-locking with rubber strap. No. 1-8851-PK Key-locking with rubber strap. 508 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 509
40, 43 & 47 - SERIES djustable Latches Diameter of Maximum Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes adjustment Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) (mm) Strength (kg) /7 /9 47-2650 MS ZN 5.1 20 1000 186.0 40.0 22.0 0.209 04-2560 1167/7 SS 1167/9 SS 43-3000* MS ZN 8.1 20 2000 183.0 34.8 36.3 0.417 1167/7 SS 04-4000 SS316 8.1 20 2500 183.0 34.8 36.3 0.417 1167/9 SS 43-3000SF MS ZN 20 2000 183.0 34.8 36.3 0.417 04-4000, 04-663L 1167/7 SS 1167/9 SS 40-663L 40-1292L 40-1292L/152 MS ZN 20 2000 183.0 31.0 31.0 0.321 SS 20 2500 183.0 31.0 31.0 0.321 MS ZN 20 2000 233.0 31.0 32.3 0.355 SS 20 2500 233.0 31.0 32.3 0.355 MS ZN 50 2000 283.0 31.0 32.3 0.375 SS 50 2500 283.0 31.0 32.3 0.375 04-663L 04-663L 04-663L SF & L versions in MSZN have self finish bases for welding THPLTES please order separately where required Dimension Guide (approx. sizes mm) Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) 04-2650 MS ZN 5.1 1000 46.4 19.5 22.7 0.035 MS ZN 8.1 2000 56.3 24.4 34.8 0.088 04-4000* SS316 8.1 2500 56.3 24.4 34.8 0.088 Example of how to order: LTH Part No. + Material + Finish + Qty 47-2650 MS ZN 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty 04-2650 MS ZN 25 MS SF 2000 56.3 25.0 34.8 0.088 04-663L MS SF 2000 28.6 22.2 28.6 0.048 SS 2500 28.6 22.2 28.6 0.048 * Fix with 8mm low head socket cap screws 04-663L 04-2650 04-4000 40-663L & 04-663L 40-663L & 04-663L 47-2650 & 04-2650 510 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
47-2650 43-3000 04-2650 04-4000 40-663L 40-1292L 40-1292L/152 04-663L 04-663L 04-663L 40, 43 & 47 - SERIES djustable Latches 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 511
40 & 41 - SERIES djustable Latches Diameter of Maximum Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes adjustment Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) (mm) Strength (kg) /7 /9 40-1292 40-1292/152 41-1292 41-1292/152 MS ZN 8.1 20 2000 233.0 76.2 40.0 0.656 1167/7 04-663W SS 8.1 20 2500 233.0 76.2 40.0 0.656 1167/9 MS ZN 8.1 50 2000 283.0 76.2 40.0 0.700 1167/7 04-663W SS 8.1 50 2500 283.0 76.2 40.0 0.700 1167/9 MS ZN 8.1 20 2000 233.0 76.2 48.0 0.674 1167/7 04-663W SS 8.1 20 2500 233.0 76.2 48.0 0.674 1167/9 MS ZN 8.1 50 2000 283.0 76.2 48.0 0.720 1167/7 04-663W SS 8.1 50 2500 283.0 76.2 48.0 0.720 1167/9 THPLTES please order separately where required Dimension Guide (approx. sizes mm) Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) MS ZN 8.1 2000 63.5 76.2 33.3 0.232 04-663W SS 8.1 2500 63.5 76.2 33.3 0.232 Example of how to order: LTH Part No. + Material + Finish + Qty 40-1292 MS ZN 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty 04-663W MS ZN 25 04-633W 512 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
40-1292 40-1292/152 04-663W 04-663W 41-1292 04-663W 41-1292/152 04-663W 40 & 41 - SERIES djustable Latches 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 513
V7 Draw Latch Over-center Large and small Zinc alloy Latch Large 34 (1.34) 21 (.83) 1 (.04) ase Lock plate 21 (.84) Lever 84 (3.29) 18 (.71) Lock plug Pin 32 (1.26) lade Keeper 8 (.32) 24 (.94) 4 (.16) TUL SIZE 10 (.39) 12±0.1 (.472±.004) Ø 3.2±0.1 (.125±.004) 16 (.63) 12 (.47) 12 (.47) 35.5±0.1* (1.398±.004) Ø 3.2±0.1 (.125±.004) Door/frame separation 16±0.1 (.63±.004) *Gasket recommended to accommodate panel variations Sleek, smooth low profile design Locking and non-locking Robust, riveted, tamperresistant construction Material and Finish Zinc alloy, chrome plated or powder coated and stainless steel Performance Details Max. working load: 1200 N (270 lbf) Installation Notes Install assembly with six M3 (No. 4) flat head screws (not supplied) Keys Overmolded key S010 (pair) Part number: V7-KEYS Latch Keeper Small 31 (1.21) 18 (.71) Lock plate Lever 72 (2.84) Lock plug 14 (.57) 28 (1.09) Long pin lade 7 (.27) 20 (.79) 3 (.14) 14 (.544) 5 (.20) 12±0.1 (.472±.004) 30±0.1* (1.181±.004) Ø 3.2±0.1 Door/frame 12±0.1 (.126±.004) separation (.472±.004) *Gasket recommended to accommodate panel variations 17 (.69) ase TUL SIZE ase type 10 Small 20 Large V7 - - 1 L - F F Finish 10 right chrome plated 20 Satin chrome plated 50 lack powder coated Part Number Selection ssembly complete with keeper L Lock style 01 Large non-locking 05 Small non-locking 11 Large locking keyed alike S-010 (2 keys supplied) 15 Small locking keyed alike S-010 (2 keys supplied) 514 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
V2 Draw Latch Over-center Small Torsion spring to accommodate application variances Material and Finish Stainless steel or steel, zinc plated Performance Details Steel lamping force: 330 N (75 lbf) Min. 700 N (160 lbf) Max. Stainless Steel lamping force: 260 N (60 lbf) Min. 530 N (120 lbf) Max. Notes Spring loaded anchor plate compensates up to 2.3 (0.09) for irregularities in sealing and gasket set Short lade 14.5 (.57) 48 (1.88) Wire Sealing 15 (.59) 35 (1.375) 13 (.50) Ø 2.4 (.09) 25 (1.00) 16 (.63) 82 (3.22) 16 (.63) 82 (3.22) 38 (1.50) 38 (1.50) TUL SIZE Long lade 19.5 (.77) Padlockable 22 (.88) 5.5 (.218) 2 places 13 (.50) 16 (.63) 25 (1.00) 107 (4.22) 12.7 (.50) Ø 9.5 (.38) 16 (.63) 82 (3.22) 64 (2.50) 38 (1.50) 14 (.562) Keeper S 2 Holes (see keeper table) Door / frame separation 6 (.25) 25 (1.00) Mounting hole 2 (.08) Ø 5.5 (.218) 2 Holes 35 (1.375) 15.5 (.607) 11 (.42) Part Number See table Order latch and keeper separately Description Latch Keeper Style S Dimension Part Number Min. Max. Steel Stainless Steel Short blade 55 (2.17) 57.3 (2.26) V2-0025-07 V2-0025-52 Long blade 80.7 (3.17) 83 (3.26) V2-0068-07 ~ Wire sealing 55 (2.17) 57.3 (2.26) V2-0034-07 V2-0034-52 Padlockable 55 (2.17) 57.3 (2.26) V2-0026-07 V2-0026-52 3.4 (.135) mounting holes V2-0018-07 V2-0018-52 5.5 (.218) mounting holes V2-0054-07 V2-0054-52 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 515
V4 Draw Latch Over-center Large 12.7 (.50) Travel 47.5 (1.87) 21.3 (.84) 4.6 (.18) 9.1 (.36) 22.1 (.87) 20.6 (.81) 6.6 (.26) 47.5 (1.87) TUL SIZE 86.5 (3.40) Not extended Torsion spring to accommodate application variances Material and Finish Stainless steel or steel, zinc plated Performance Details Steel verage ultimate load: 3500 N (786 lbf) Stainless Steel verage ultimate load: 3800 N (850 lbf) Notes Spring loaded anchor plate compensates up to 2.3 (0.09) for irregularities in sealing and gasket set djustable Installation Door / frame separation 38.1 (1.50) 1 2 3 49 (1.93) 52.3 (2.06) Ø 4.3 (.169) Min. 68 (2.68) Max. 71 (2.78) 19.8 (.78) Fixed Installation 38.1 (1.50) Ø 4.3 (.169) Door / frame separation 1 2 3 30.1 (1.18) Position 1 Position 2 Position 3 Position Number Dimensions Min. Max. 1 71.4 (2.81) 73.7 (2.90) 2 69.9 (2.75) 72.1 (2.84) 3 68 (2.68) 70.6 (2.78) Description Part Number Steel Stainless Steel Latch V4-0006-02 V4-0006-52 Keeper V4-0009-02 V4-0009-52 Part Number See table Order latch and keeper separately 516 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
WING TURN LMPS Shown with strike SH-1001 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 517
WING TURN LMPS Shown with strike SH-1001 518 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
WING TURN LMPS 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 519
WING TURN LMPS Mounts into 3.00 x 3.10 opening 520 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
Series 101- ross Ref. : DE-ST-O Series 201 Holding apacity: 110 lbs. (50 kg) Weight: 0.13 lb. (60 g) ar opens 100º, Handle 56º Supplied: GO-F-10138 One of the most affordable clamps. T-handle and straight base options available. Vertical Handle Toggle lamps 0.35 (9) 4 x Ø0.17 (4 x Ø4.4) 0.69 (17.5) 0.63 (16) 1 (25.4) 0.94 1.31 (23.8) (33.3) 3.03 (77) 3.30 (83.8) 0.32 (8) Model GO-101- GO-101-SS GO-101-I GO-101-IT GO-101-T Description U-ar, Flanged ase, Straight Handle Stainless Steel Model of GO-101- U-ar, Straight ase, Straight Handle U-ar, Straight ase, T-Handle U-ar, Flanged ase, T-Handle GO-101-0.75 (19) 0.08 (2) 1.02 (26) 0.19 (4.8) 1.06 (27) 2.02 (51.4) Series 11002- GO-13002- has hardened bushings and removable ground pins. 2 x Ø1 1 D E Unique hole pattern for flexibility in a wide range of mounting options. F1 G1 GO-13002- ase F G H N J K M GO-13002- L Model GO-11002- GO-12002- GO-13002- Holding apacity 165 lbs. (75 kg) 330 lbs. (150 kg) 550 lbs. (250 kg) Supplied ar Handle Opens Opens GO-S-14134 96º 66º GO-S-56212 108º 70º 1 1 D E F F1 G H J K L M N Weight 0.32 (8) 0.32 (8) GO-S-12412 106º 67º - - - 0.32 (8) 0.20 (5) 0.70 (18) 0.25 1 (6.4) (25.4) 0.35 (8.8) - - - 1.32 (33.5) 0.95 1.34 (24.2) (34) 1.06 (27) - 1.65 (42) 2.01 (51.1) 0.56 (14.3) 0.50 (12.7) - - - 0.75 (19) 0.63 (16) 0.75 (19) 1.14 (29) 1.38 (35) 1 1.69 (25.4) (43) 0.39 (10) 0.51 (13) 0.75 (19) 0.87 (22) 1.22 (31) 1.38 (35) 1.50 (38) 1.73 (44) 3.94 (100) 0.10 (2.5) 0.13 (3.2) 0.13 (3.2) 3.82 (97) 5.63 (143) 7.72 (196) 0.28 lb. (128 g) 0.37 lb. (170 g) 0.84 lb. (380 g) 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 521
Series 13005 ross Ref. : DE-ST-O Series 305 ar opens 90º, Handle 175º GO-13008 has hardened bushings and removable ground pins. This unique space-saving clamp is very affordable. Vertical Handle Toggle lamps 4 x Ø D E F G J H K L M GO-13005 Holding Model Ø D E F G H J K L M Weight apctiy Supplied 150 lbs. 0.17 0.35 0.50 0.53 1.03 0.63 1 1.40 0.31 0.50 1.21 2.24 0.13 lb. GO-13005 (68 kg) GO-F-10138 (4.4) (9) (12.7) (13.5) (26.2) (15.9) (25.4) (35.2) (7.9) (12.7) (30.8) (57) (60 g) GO-13005-SS Stainless Steel Model of GO-13005 GO-13007 GO-13008 UNIQUE 330 lbs. (150 kg) 705 lbs. (320 kg) 13005-H GO-F-56212 GO-F-38312 High ase Model of GO-13005 0.28 (7) 0.31 (7.9) 0.60 (15.2) 0.75 (19) 0.77 (19.5) 1.14 (28.9) 1.06 (27) 1.54 (39) 1.73 (44) 2.53 (64.3) 1.16 (29.4) 1.50 (38.1) 1.81 (46) 2.46 (62.7) 0.31 (7.9) 2.31 (58.7) 3.46 (88.1) 0.50 (12.7) 0.75 (19) 0.87 (22.2) 1.31 (33.3) 1.97 (50.1) 2.66 (67.5) 3.69 (93.7) 5.32 (135) 0.50 lb. (230 g) 1.38 lbs. (630 g) 1 (25.4) UNIQUE 13005-SM & 13007-SM Side Mount Model of GO-13005 and GO-13007 GO-13005-H 1.21 (30.8) 0.53 (13.5) 1.03 (26.2) 0.65 (16.5) 1.02 (26) Unique hole pattern for flexibility in a wide range of mounting options. J GO-13005-SM G Model D E F G H J K L GO-13005-SM 0.31 (7.9) GO-13007-SM 0.50 (12.7) 2 (50.8) 3.06 (77.8) 1.20 (30.6) 1.97 (50.1) 2.37 (60.3) 3.80 (96.7) 1.03 (26.2) 1.54 (39.2) 0.68 (17.4) 1.04 (26.3) 0.17 (4.4) 0.28 (7) 0.22 (5.6) 0.37 (9.4) 0.12 (3) 0.16 (4) 0.76 (19.5) 1 (25.4) 1.22 (31) 1.81 (46) D E F H K L 522 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
Series 12050 ross Ref. : DE-ST-O Series 202 Holding apacity: 200 lbs. (91 kg) Weight: 0.38 lbs (170 g) ar opens 100º, Handle 60º Supplied: GO-F-14134 Vertical Handle Toggle lamps Popular! 0.63 (16) 0.87 (22) 0.37 (9.5) Ø0.25 (Ø6.4) 1.06 (27) 1.30 (33) 1.06 (27) 1.56 (39.7) 0.50 (12.7) 4 x Ø0.20 (4 x Ø5.2) 0.25 (6.4) GO-12050 Model GO-12050 GO-12050-SS GO-12050-U GO-12050-UL GO-12055 GO-12060 GO-12065 GO-12070 GO-12075 GO-12080 GO-12085 UNIQUE 12050-H Description Fixed, Flanged ase, Straight Handle Stainless Steel Model of GO-12050 U-ar, Flanged ase, Straight Handle Extra Long U-ar 2.27 (58mm) Flanged ase, Straight Handle Fixed, Straight ase, Straight Handle Solid ar, Flanged ase, Straight Handle Solid ar, Straight ase, Straight Handle Fixed, Flanged ase, T-Handle Fixed, Straight ase, T-Handle Solid ar, Flanged ase, T-Handle Solid ar, Straight ase, T-Handle High ase Model of GO-12050 GO-12050-U 3.74 3.74 (95) (95) 4.21 4.21 (107) 0.38 (9.6) 0.89 0.89 (23) (23) 0.13 (3.2) 1.30 1.30 (33) (33) 1 1 (25.4) 2.52 (25.4) 2.52 (64) (64) 0.25 1.37 (6.4) (35) 4.80 (122) 0.38 (9.6) 1.66 (42.2) UNIQUE 12050-SM Side Mount Model of GO-12050 GO-12050-H Model GO-12050-SM 0.38 (9.6) 1.06 (27) GO-12050-SM 0.93 (23.5) 0.20 (5.1) 0.20 (5.2) 1.66 (42.2) 1.56 (39.7) 0.64 (16.2) 2.36 (60) 1.35 (34.2) 2.52 (64.2) 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 523
102- Holding apacity: 220 lbs. (100 kg) Weight: 0.25 lb. (115 g) ar opens 90º, Handle 65º Supplied: GO-F-14134 Vertical Handle Toggle lamps 0.33 (8.4) 4 x Ø0.19 (4 x Ø4.8) 0.94 (24) 0.55 (14) 1.54 (39) 1.14 (29) 0.71 1.10 (18) (28) 3.68 (94) 0.39 (10) 0.76 (19) 0.08 (2) GO-102-1.54 (39) 1.14 (29) 101- Holding apacity: 220 lbs. (100 kg) Weight: 0.3 lb. (135 g) ar opens 90º, Handle 65º Supplied: GO-F-14134 0.33 (8.4) 0.79 1.18 (20) (30) 0.94 (24) 1.30 (33) 1.38 (35) 4.69 (119) Model GO-101-0.39 (10) 0.55 (14) 1 (25.4) GO-101-2.16 (55) 1.76 (45) 0.30 (7.5) 0.75 (29) 4 x Ø0.19 (4 x Ø4.8) 524 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
106- Holding apacity: 220 lbs. (100 kg) Weight: 0.4 lb. (184 g) ar opens 82º, Handle 55º Supplied: GO-F-14134 Vertical Handle Toggle lamps 1.06 (27) 1.36 (35) 0.75 1.13 (19) (29) 5.50 (140) 0.41 (10) 1.25 (32) Model 1.50 (38) 0.50 (13) 0.50 (13) GO-106-0.30 (7.6) 0.75 (19.1) 0.25 (6.5) GO-106-6 x Ø0.19 (6 x Ø4.8) 12205 Holding apacity: 400 lbs. (182 kg) Weight: 1.36 lbs. (620 g) ar opens 100º, Handle 57º Supplied: GO-F-56212 6.50 (165) 0.32 (8.1) 3.12 (79.4) 4 x Ø0.28 (4 x Ø7.2) D 7.87 (200) E Model D E F GO-12205 1.37 (35) 2.12 (54) 1.13 (28.6) 1.94 (49.2) 0.75 (19) 0.13 (3.2) GO-12205 2 (51) F 4.18 (106.3) 6.39 (162.4) 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 525
Series 12130 ross Ref. : DE-ST-O Series 207 Holding apacity: 500 lbs. (227 kg) ar opens 100º, Handle 60º Supplied: GO-F-56212 Expanded Selection. This is the most popular vertical handle toggle clamps. Many options are available. Vertical Handle Toggle lamps Popular! 1.87 (47.6) 2.81 (71.4) D 0.75 (19) 4 x Ø0.28 (4 x Ø7.2) Model Description Weight GO-12130 Short U-ar, Flanged ase, Straight Handle 0.78 lb. (355 g) GO-12130-SS Stainless Steel Model of GO-12130 GO-12131 Short U-bar, Flanged ase, T-Handle 0.81 lb. (370 g) GO-12132 Long U-ar, Flanged ase, Straight Handle 0.81 lb. (370 g) GO-12133 Long U-ar, Flanged ase, T-Handle 0.88 lb. (400 g) GO-12135 Short U-ar, Straight ase, Straight Handle 0.78 lb. (355 g) GO-12136 Short U-ar, Straight ase, T-Handle 0.81 lb. (370 g) GO-12137 Long U-ar, Straight ase, Straight Handle 0.81 lb. (370 g) GO-12138 Long U-ar, Straight ase, T-Handle 0.88 lb. (400 g) GO-12140 Short Solid ar, Flanged ase, Straight Handle 0.75 lb. (340 g) GO-12141 Short Solid ar, Flanged ase, T-Handle 0.78 lb. (355 g) GO-12142 Long Solid ar, Flanged ase, Straight Handle 0.78 lb. (355 g) GO-12143 Long Solid ar, Flanged ase, T-Handle 0.81 lb. (375 g) GO-12145 Short Solid ar, Straight ase, Straight Handle 0.75 lb. (340 g) GO-12146 Short Solid ar, Straight ase, T-Handle 0.78 lb. (355 g) GO-12147 Long Solid ar, Straight ase, Straight Handle 0.78 lb. (355 g) GO-12148 Long Solid ar, Straight ase, T-Handle 0.81 lb. (375 g) UNIQUE 12130-H High ase Model of GO-12130 GO-12130 6.06 (154) 5.50 (140) E 1.25 (32) Model D E F ll 0.58 (14.7) 0.33 (8.3) 1.25 (31.8) 1.81 (46) 0.63 (16) 1.37 (35) 0.13 (3.2) 2.81 (71.4) 4.56 (116) 3.75 (95.2) 5.50 (139.7) F 1.81 (46) 0.28 (7.1) 6.50 (165) 0.63 (16) 2.25 (57) 2.81 (71) 1.75 (45) UNIQUE 12130-SM Side Mount Model of GO-12130 GO-12130-H 0.63 (16) G 0.96 (24) 2.62 (66.7) Model D E F G ll 0.28 (7.2) 1.12 (28.5) 0.69 (17.5) 0.24 (6.1) 1.18 (30) 1.81 (46) 0.12 (3) GO-12130-SM D E F 0.25 (6.4) 2.69 1.88 (68) (48) 526 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
Series 12265 Popular! ross Ref. : DE-ST-O Series 210 Holding apacity: 750 lbs. (340 kg) ar opens 105º, Handle 58º Supplied: GO-F-38312 Hardened bushings and removable ground pins Vertical Handle Toggle lamps 0.43 (11) 2.46 (62.5) 4 x Ø0.34 (4 x Ø8.7) D Model D E F ll 1.78 (45.3) 2.53 (64.3) 1.25 (31.8) 1.94 (49.2) 0.75 (19) 0.13 (3.2) Model Description Weight GO-12265 U-ar, Flanged ase, Straight Handle 1.40 lbs. (635 g) GO-12265-SS Stainless Steel Model of GO-12265 GO-12270 U-ar, Straight ase, Straight Handle 1.40 lbs. (635 g) GO-12275 Solid ar, Flanged ase, Straight Handle 1.50 lbs. (680 g) GO-12280 Solid ar, Straight ase, Straight Handle 1.50 lbs. (680 g) GO-12285 U-ar, Flanged ase, T-Handle 1.57 lbs. (710 g) GO-12290 U-ar, Straight ase, T-Handle 1.57 lbs. (710 g) GO-12295 Solid ar, Flanged ase, T-Handle 1.62 lbs. (735 g) GO-12300 Solid ar, Straight ase, T-Handle 1.62 lbs. (735 g) GO-12265 8.82 (224) 7.50 (202) E 1.75 (45) 2.63 (67) 0.37 (9.5) F 3.25 (82.5) 5.45 (138.5) D Series 12305 Holding apacity: 750 lbs. (364 kg) Weight: 2.18 lbs. (990 g) ar opens 100º, Handle 65º Supplied: GO-F-38312 Note the angular spindle bar. vailable with open or solid spindle bars. Solid bar can be shortened, and the supplied bolt retainer welded on. ngular bar keeps the overall height low, yet bar clearance high. 0.77 (19.2) 0.38 (9.6) E 4 x Ø0.31 (4 x Ø7.9) 0.37 (9.5) D F Model D E F ll Model 1.25 (31.8) GO-12305 GO-12310 GO-12315 GO-12320 2.13 (54) 1.13 (28.6) 2.06 (52.4) Description 0.56 (14.3) Open bar, Flanged ase Open ar, Straight ase Solid ar, Flanged ase Solid ar, Straight ase 1.63 (41.3) GO-12305 8.62 (219) 9.69 (246) 1 (25.4) 2.50 (64) 4.56 (116) 0.87 (22.2) 0.19 (4.8) 0.4 (11) 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 527
Series 10444 Holding apacity: 880 lbs. (400 kg) ar opens: 85º, Handle 58º Supplied: GO-S-38300 Hardened bushings and removable ground pins This rugged yet smooth fuctioning clamp is designed for use in ovens. It has a rounded handle with no plastic cover. Vertical Handle Toggle lamps Welder s hoice! 9.37 (238) 1 (25.4) GO-10448 2 (50.8) 4 x Ø0.41 (4 x Ø11) Model Description Weight GO-10444 Long ar 0.24 1.42 1.18 1.92 lbs. (870 g) GO-10448 Short ar (6) (36) (30) 1.85 lbs. (840 g) 2.24 (57) 1.57 (40) 1.97 (50) 2.76 (70) Series 10247 ross Ref. : DE-ST-O Series 247 Holding apacity: 1,000 lbs. (450 kg) Weight: 2.76 lb. (1250 g) ar opens 100º, Handle 58º (with roll pin) ar opens 135º, Handle 70º (without roll pin) Supplied: GO-S-12300 Hardened bushings and removable ground pins 0.53 (13.4) 3.13 (79.4) 4 x Ø0.34 (4 x Ø8.7) 8.87 (225) 9.50 (241) Roll Pin Position Model D ll Model 1.78 (45.2) 2.53 (64.3) 0.89 (22.6) Description 1.25 (31.8) 2 (51) 2.63 (67) 0.20 (5) 0.13 (3.2) GO-10247 GO-10248 GO-10249 GO-10250 U-ar, Flanged ase U-ar, Straight ase Solid ar, Flanged ase Solid ar, Straight ase GO-10247 5 (126.4) D 2 (50.8) 0.37 (9.5) 528 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
101-H Holding apacity: 1,000 lbs. (450 kg) Weight: 2.69 lb. (1220 g) ar opens 101º, Handle 63º Supplied: GO-S-12300 Vertical Handle Toggle lamps 11 (280) 2.36 (60) 4 x Ø0.35 (4 x Ø9) Model GO-101-H 0.82 (20.8) 0.16 (4) GO-101-H 1.69 (43) 2.76 (70) 4.92 (125) 1.57 (40) 2.76 (70) Series 101-J ross Ref. : DE-ST-O Series 267 Holding apacity: 1,200 lbs. (550 kg) Weight: 5.6 lb. (2,540 g) ar opens 100º, Handle 48º (with roll pin on top) ar opens 140º, Handle 60º (with roll pin on bottom) Supplied: GO-S-58500 Hardened bushings and removable ground pins 0.66 (17) 3 (76.2) 2 (51) D 12 (305) 6.02 (153) Model D ll 2.75 (70) 3.75 (95.2) 1.25 (31.8) 0.50 (13) Top Pin Pos. 3.25 (83) ottom Pin Pos. Model GO-101-J Description U-ar, Flanged ase 0.24 (6) GO-101-JS Solid ar, Flanged ase GO-101-J 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 529
Series 22005 Holding apacity: 50 lbs. (22.7 kg) Weight: 0.06 lb. (25 g) ar opens: 90º, Handle 60º Supplied: GO-S-08034 (Nylon) Horizontal Handle Toggle lamps 0.09 (2.4) 0.17 (4.4) 0.94 (23.8) 0.63 (16) 0.41 (10.4) Low GO-22025 Model D ll Model 0.38 (9.6) 0.19 (4.76) 0.40 (10.2) Description 0.40 (10.2) 0.95 (24.2) 0.53 (13.5) 0.47 (12) 0.15 (4) 0.63 (15.9) 0.05 (1.2) GO-22005 GO-22010 GO-22025 GO-22030 High ar, Flanged ase High ar, Straight ase Low ar, Flanged ase Low ar, Straight ase 1.03 (26.14) D 0.94 (23.8) 2.81 (71.46) Series 201 ross Ref.: DE-ST-O Series 205 Holding apacity: 60 lbs. (27 kg) Weight: 0.09 lb. (40 g) ar opens: 90º, Handle 80º Supplied: GO-S-08034 (Nylon) This compact clamp is the most economical horizontal toggle clamp. Most suitable for holding down sheet metal or circuit boards. Many spindle bar and base combinations available. 0.31 (8) Ø0.17 (Ø4.3) 0.94 0.63 (23.8) (16) GO-201 Series 0.79 (20) 3.04 (77.11) 0.17 (4.4) Model Ø D E ll Model 0.19 (4.83) 0.37 (9.4) 0.37 (9.4) Description 0.08 (2) 0.69 (17.5) GO-201 U-ar, Flanged ase GO-201-SS Stainless Steel Model of GO-201 GO-201-I U-ar, Straight ase GO-201-L U-ar, Left Hand Flanged ase GO-201-R U-ar, Right Hand Flanged ase GO-201- Fixed ar, Flanged ase GO-201-SS Stainless Steel Model of GO-201- GO-201-I Fixed ar, Straight ase GO-201-L Fixed ar, Left Hand Flanged ase GO-201-R Fixed ar, Right Hand Flanged ase GO-201 GO-201-0.67 (17) 1.02 (26) 0.13 (3.2) GO-201- Series D E 0.87 (22) 0.13 (3.3) 0.71 (18) 0.44 (11.1) 0.63 (15.9) 0.94 (23.8) 3.11 (79) 530 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
Horizontal Handle Toggle lamps 20800 & 20800-SS Holding apacity: 66 lbs. (30 kg) Weight: 0.09 lbs. (40 g) ar opens: 80º, Handle 88º Supplied 0.45 0.33 (11.5) (8.3) 0.17 (4.2) GO-20800 Model D E 1.25 (32) 0.86 (22) 0.49 (12.5) ll 0.16 (4) 0.22 (5.5) 0.35 (9) 0.55 (14) 0.95 (24) 0.24 (6) 1.10 (28) 0.55 (14) D E 0.06 (1.6) Model Description 3 (76.2) GO-20800 GO-20800-SS Flanged ase Stainless Steel Model of GO-20800 20300 Holding apacity: 66 lbs. (30 kg) Weight: 0.22 lb. (100 g) ar opens: 65º, Handle 55º Supplied 1.18 (30) 0.87 (22) 4-Ø0.18 (4-Ø4.5) 1 (25.4) 0.16 (4) GO-20300 Model GO-20300 0.20 (5) 0.35 (9) 0.95 (24) 1.48 (37.5) 1.44 (36.5) 4.33 (110) 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 531
22100 & 22105 Holding apacity: 150 lbs. (68 kg) Weight: 0.24 lbs. (110 g) ar opens: 90º, Handle 90º Supplied: GO-S-14134 Horizontal Handle Toggle lamps lmost identical to the 201- model. Lighter and more affordable. 0.87 (22) 1.37 (35) 4 x Ø0.20 (4 x Ø5.2) GO-22100 Model 1 (25.4) 1.56 (40) 0.06 (1.6) ll 0.25 (6.4) 0.50 (12.7) 0.25 (6.4) 1.06 (27) Model Description 2.25 (57.4) 1.56 (40) GO-22100 Flanged ase 5.39 (137) GO-20105 Straight ase Series 20752- ar opens: 94º, Handle 76º D The hunch back design leaves extra room for the fingers. ll models have the red ribbed handles and come with hex bolt spindles. 4 x ØE1 E F 20752- ase G H J K G GO-21502- L M N Model GO-20752- Holding apacity 165 lbs. (75 kg) Supplied GO-S-14134 D E ØE1 F G H J K L M N Weight 1.06 (27) - - 0.23 (5.8) - 0.20 (5.2) 0.66 (16.8) 0.53 (13.5) 0.37 (9.5) 0.75 (19) 0.08 (2) 1.46 (37) 1 (25.4) 4.29 (109) 0.22 lb. (100 g) GO-21502-330 lbs. (150 kg) GO-S-56212 1.57 (40) 1.10 (28) 0.87 (22) 0.24 (6.2) 0.22 (5.5) - - 1.02 (26) 0.55 (14) 1 (25.4) 0.10 (2.5) 2.44 (62) 1.50 (38) 6.73 (171) 0.50 lb. (230 g) GO-22502-550 lbs. (250 kg) GO-S-12300 1.85 (47) 1.22 (31) 1.02 (26) 0.35 (9) 0.26 (6.6) - - 1.02 (26) 0.69 (17.5) 1.34 (34) 0.12 (3) 3.11 (79) 1.65 (42) 8.62 (219) 0.95 lb. (430 g) 532 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
Series 201- ross Ref.: DE-ST-O Series 215 Holding apacity: 200 lbs. (90 kg) Weight: 0.29 lb. (130 g) ar opens: 85º, Handle 60º Supplied: GO-F-14134 Horizontal Handle Toggle lamps Popular! 1.42 0.87 (36) (22) For Solid ar Ø 0.20 (5.2) 1.25 (32) 0.50 (12.5) GO-201- Model Description Ø 1.44 (37) 1 (25.4) 0.08 (2) GO-201- GO-201-SS GO-201-I GO-201-S GO-201-SI U-ar, Flanged ase Stainless Steel Model of GO-201- U-ar, Straight ase Solid ar, Flanged ase Solid ar, Straight ase 0.45 (7.4) 0.28 (7.1) 0.16 (4) 2.17 (55) 0.28 (7) 1.06 (27) 1.45 (37) 5.43 (138) UNIQUE 201-H High ase Model of GO-201- Weight: 0.32 lbs. (146 g) 0.50 (12.5) 1.66 (41.4) GO-201-H 2.17 (55) 1.45 (37) UNIQUE 201-SM Side Mount Model of GO-201- Weight: 0.36 lbs. (163 g) 0.50 (12.5) 0.12 (3) 0.69 (17.4) 1.77 (45) GO-201-SM Model D E ll 0.20 (5.1) 1.04 (26.4) 0.70 (17.8) 0.24 (6.1) 0.87 (22.1) D E 1.42 (36) 2.10 (53.25) 1.73 (44) 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 533
20820 ross Ref.: DE-ST-O Model 317-U Holding apacity: 220 lbs. (100 kg) Weight: 0.88 lbs. (400 g) ar opens: 185º, Handle 60º Supplied: GO-F-56212 Mount vertically and horizontally Horizontal Handle Toggle lamps 8 x Ø0.26 (8 x Ø6.7) 4.50 (114) 1.50 (38) D 2.75 (70) GO-20820 6.41 (163) 1.25 (32) E 2.68 (68) 1.25 (32) F Model D E F GO-20820 0.35 (9) 0.63 (16) 1 (25.4) 0.63 (16) 0.63 (16) 0.63 (16) Series 203-F & 202-F Holding apacity: 500 lbs. (227 kg) ar opens: 85º, Handle 58º Supplied: GO-F-56212 1.85 1.14 (47) (29) 4 x Ø0.28 (4 x Ø7) GO-203-F 1.34 (34) D 1.61 (41) 2.24 (57) 7.80 (198) GO-202-FL Model Description D E Weight GO-203-F GO-203-FL GO-202-F GO-202-FL U-ar, Flanged ase Long U-ar, Flanged ase U-ar, Side Mounted Long U-ar, Side Mounted 2.24 (57) 3.70 (94) 2.05 (52) 3.50 (89) 0.31 (8) 0.63 (16) 0.12 (3) 1 (25.4) 0.75 lb. (340 g) 0.84 lb. (380 g) 0.85 lb. (385 g) 0.94 lb. (425 g) 2.26 (60) 1.65 (42) E D 2.42 (62) 7.80 (198) 534 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
Series 225-D ross Ref.: DE-ST-O Series 225 Holding apacity: 500 lbs. (227 kg) Weight: 0.59 lbs. (265 g) ar opens: 90º, Handle 65º Supplied: GO-F-56212 This is the most popular horizontal handle toggle clamp. See Series GO-22165 for extra long U-ars. Horizontal Handle Toggle lamps Popular! 1.42 (35) 0.87 (22) 4 x Ø0.26 (4 x Ø6.7) 0.82 (21) 0.50 (12.7) 1.37 (35) 1.88 (48) GO-225-D Model Description GO-225-D GO-225-DSS GO-225-DI UNIQUE 225-DH U-ar, Flanged ase Stainless Steel Model of GO-225-D 0.33 (8.3) 0.25 (6.4) U-ar, Straight ase High ase Model of GO-201- Weight: 0.63 lbs. (286 g) 0.50 (12.7) 1 (25.4) 2.75 (70) 1.50 (38) 6.61 (168) 6.61 (168) 0.26 (6.7) 2.13 (54) GO-225-DH 2.75 (70) 1.50 (38) UNIQUE 225-DSM Side Mount Model of GO-201- Weight: 0.69 lbs. (315 g) 0.50 (12.7) 1.07 (27) D 2.65 (67) 1.13 (28.6) GO-225-DSM 1.71 (43.4) 2.63 (66.8) 1.95 (49.4) Model D ll 0.26 (6.7) 1.07 (27.3) 0.65 (17) 0.23 (5.9) 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 535
Series 22165 Holding apacity: 550 lbs. (250 kg) ar opens: 96º, Handle 88º Supplied: GO-F-56212 Expanded selection. Larger version of Series 225-D Horizontal Handle Toggle lamps 1.37 0.87 (35) (22) E 0.28 (7.1) ØF 0.25 (6.4) 1.25 (32) 0.56 (14.3) 0.13 (3.2) GO-22165 Model Description D Weight 0.25 (6.4) 1 (25.4) 1.25 (32) GO-22165 GO-22170 GO-22175 GO-22180 Short U-ar, Flanged ase Short U-ar, Straight ase Short Solid ar, Flanged ase Short Solid ar, Straight ase 1.31 (33.3) 2.81 (71.4) 2.99 (76) 1.81 (46) 7.28 (185) 0.63 lb. (285 g) 0.66 lb. (300 g) 2.19 (56) D GO-22185 GO-22190 GO-22195 GO-22200 Long U-ar, Flanged ase Long U-ar, Straight ase Long Solid ar, Flanged ase Long Solid ar, Straight ase 1.13 (28.7) 6.50 (165) 6.56 (167) 1.63 (41) 10.95 (278) 0.78 lb. (360 g) 0.81 lb. (365 g) Model E ØF ll 0.33 (8.4) 0.33 (8.3) 21383 Holding apacity: 550 lbs. (250kg) Weight: 0.46 lb. (209 g) ar opens: 72º, Handle 72º Supplied 1.50 (38) 1 (25) 4 x Ø0.28 (4 x Ø7) 2 (51) 1.26 (32) 0.79 (20) GO-21383 Model GO-21383 0.37 (9.4) 0.55 (14) 1.54 (39) 0.09 (2.3) 7.83 (199) 536 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
25382 Holding apacity: 620 lbs. (280 kg) Weight: 0.84 lb. (380 g) ar opens: 80º, Handle 80º Supplied Horizontal Handle Toggle lamps 2.24 1.46 (57) (37) 4 x Ø0.41 (4 x Ø11) GO-25382 Model GO-25382 0.47 (12) 0.79 (20) 1.18 (30) 1.44 (37) 0.12 (3) 3.35 (85) 2.24 (57) 21385 Holding apacity: 660 lbs. (300 kg) Weight: 1.08 lb. (490 g) ar opens: 80º, Handle 85º Supplied: GO-S-38200 GO-21385 features an easy release lever. 2.36 (60) 1.57 (40) 4 x Ø0.41 (4 x Ø10.5) GO-21385 1.43 (36.5) 0.12 (3) Model GO-21385 0.43 (11) 0.79 (20) 1.46 (34) 3.35 (85) 2.28 (58) 10.63 (270) 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 537
Series 431 Supplied with latch plate and standard U-bolt Optional Long U-olts available Latch Type Toggle lamps ØP N M J K L 2 x ØQ GO-431 R Model Description GO-40323-SS GO-431-SS GO-40341-SS Stainless Steel Model of GO-40323 Stainless Steel Model of GO-431 Stainless Steel Model of GO-40341 D E F H 4 x ØG Model ross Ref. DE-ST-O GO-40323 323 GO-431 331 GO-40341 341 Holding apacity 360 lbs. (163 kg) 700 lbs. (318 kg) 2,000 lbs. (900 kg) D E F G H J K L M N P Q R Weight 0.24 (6) 0.27 (6.8) 0.37 (9.5) 0.39 (9.9) 0.45 (11.5) 0.75 (19.1) 0.78 (19.8) 1 (25.4) 1.50 (38.1) 0.20 (5.2) 0.25 (6.4) 0.37 (9.5) 0.63 (15.9) 0.75 (19) 1.63 (41.3) 1.03 (26.2) 1.56 (39.7) 2.37 (60.3) 0.17 (4.4) 0.26 (6..7) 0.34 (8.6) 0.08 (2) 0.13 (3.2) 0.16 (4) 0.75 (19) 1.25 (31.8) 1.50 (38.1) 0.75 (19) 1.05 (26.6) 1.75 (44.5) 1.11 (28.2) 1.75 (44.4) 2.13 (54) 0.94 (24) 1.50 (38) 2.05 (52) 2.24 (57) 2.87 (73) 4.50 (114.5) 0.16 (4) 0.20 (5) 0.31 (8) 0.17 (4.4) 0.25 (6.3) 0.33 (8.5) 1.15 (29.3) 1.63 (41.3) 2.91 (74) 0.16 lb. (70 g) 0.50 lb. (225 g) 1.5 lbs. (680 g) UNIQUE Optional Long U-olts When you need a longer reach, you need the LU s; Long-Reach U-olts for use with latches. D L Thread L1 W Use with Model Thread L L1 W D Model No. GO-40323-LU 2.75 1.25 0.75 0.16 GO-40323 8-32 GO-40323-LUSS (70) (31.8) (19) (4.1) GO-431-LU 4.5 2 1.25 0.2 GO-431 10-24 GO-431-LUSS (114) (50.4) (31.8) (5.1) GO-40341-LU 6.25 3.13 1.50 0.3 GO-40341 5/16-18 GO-40341-LUSS (159) (79.5) (38.1) (7.6) Series 40840 The unique latch offers dual mounting options: horizontal and vertical. Two pivot hole patterns are provided to accomodate two mounting positions. Supplied latch plate offers low profile clamping for side mounting applications. M L F N J D E GO-40870 Model GO-40820 GO-40840 GO-40870 GO-40840 Holding apacity 440 lbs. (200 kg) 550 lbs. (250 kg) 1,540 lbs. (700 kg) D E F G H J ØK L M N Weight 0.51 (13) 0.75 (19) 1.26 (32) 1.02 (26) 1.38 (35) 2 (50.5) 0.75 (19) 0.98 (25) 1.42 (36).95 (24) 1.26 (32) 1.77 (45) GO-40820 mounted on a vertical position. 1.42 (36) 1.89 (48) 2.50 (63.5) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 0.43 (11) 0.55 (14) 0.75 (19) G H - 0.81 (20.6) 1.06 (27) ØK 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 1.81 (46) 2.87 (73) 3.46 (88) 2.56 (65) 3.82 (97) 4.61 (117) 0.83 (21) 1.12 (28.5) 1.75 (44.5) 0.24 lb. (110 g) 0.67 lb. (306 g) 1.54 lbs. (700 g) 538 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
Series 40324 Supplied with latch plate These unique latch clamps are designed for enclosure applications where the clamps are perpendicular to the latches. Latch Type Toggle lamps T G D R S K P ØJ L M ØF U 2 x ØE Q H N Model GO-40324 ross Ref. DE-ST-O GO-40324 324 GO-40334 334 GO-40344 344 Holding apacity 500 lbs. (225 kg) 1,000 lbs. (450 kg) 2,000 lbs. (900 kg) D ØE ØF G H ØJ K L M N P Q R S T U Weight 0.56 (14.3) 0.81 (20.6) 1.06 (27) 1 (25.4) 1.50 (38.1) 2.13 (54) 2.09 (53.3) 2.44 (61.9) 3.31 (84.1) 3.11 (79) 4.72 (120) 5.13 (130) 0.17 (4.4) 0.28 (7.1) 0.34 (8.7) 0.21 (5.3) 0.28 (7.1) 0.21 (5.3) 8-32 1/4-20 5/16-18 0.16 (4) 0.28 (7.1) 0.37 (9.5) 0.16 (4) 0.25 (6.4) 0.31 (7.9) 0.08 (2) 0.12 (3) 0.16 (4) 0.51 (13) 0.75 (19.1) 1.25 (31.8) 1.02 (26) 1.31 (33.3) 1.87 (47.6) 0.19 (4.7) 0.34 (8.7) 0.50 (12.7) 2.76 (70) 4.02 (102) 5.91 (150) 0.87 (22) 1 (25.4) 1.44 (36.5) 1.04 (26.5) 1.59 (40.5) 2.28 (58) 3.09 (78.5) 4.49 (114) 6.06 (154) 1.22 (31) 1.63 (41.3) 2.37 (60.3) 0.44 (11.1) 0.39 (17.5) 0.25 lb. (113 g) 0.56 lb. (250 g) 1.13 1.54 lbs. (28.6) (700 g) Series 451 These are the most popular latch clamps with adjustable single hook design. Model GO-451 has a flanged base, while Model GO-452 has a narrow base which is less tolerant to twisting motions. Stainless steel models are available. Optional Latch Plates are also available. 1.50 (38.1) 2 (50.8) GO-452 ase Ø0.26 (Ø6.7) H K ØG 4 x Ø J F D GO-452 E Model ross Ref.: DE-ST-O Description Holding apacity GO-451 351 Flanged ase 375 lbs. (170 kg) D E F ØG H J K Weight 0.22 (5.6) 0.50 (12.7) 0.75 (19) 1.50 (38.1) 8.31 (211) 2.30 (58.4) 0.31 (8) 1.94 (49.2) 1.44 (36.5) 1.37 (34.9) 0..59 lb. (270 g) Optional Latch Plate GO-451-LP GO-451-SS 351-SS Stainless Steel Model of GO-451 GO-451-LPSS GO-452 351- Narrow ase 375 lbs. (170 kg) 0.26 (6.7) - 1.50 (38.1) 2 (50.8) 8.31 (211) 1.76 (44.8) 0.31 (8) - 1.44 (36.5) - 0.56 lb. (255 g) GO-452-LP GO-452-SS 351-SS Stainless Steel Model of GO-452 GO-452-LPSS GO-40371 371 Flanged ase GO-43810 381 Flanged ase 750 lbs. (340 kg) 1,000 lbs. (450 kg) 0.34 (8.7) 0.41 (10.3) 0.31 (7.9) 0.50 (12.7) 1.25 (31.8) 1.13 (28.6) 1.87 (47.6) 2.13 (54) 11.22 (285) 13.23 (336) 3.13 (79.4) 3 (76.2) 0.37 (9.5) 0.50 (12.7) 2.59 (65.7) 3.37 (85.7) 2.25 (57.3) 2.68 (68) 1.94 (49.2) 2.37 (60.3) 1.38 lbs. (624 g) GO-40371-LP 2.56 lbs. (1,130 g) GO-43810-LP 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 539
43101 ross Ref.: DE-ST-O Model 301 Holding apacity: 375 lbs. (170 kg) Weight: 0.68 lb. (310 g) Optional latch plate model GO-43101-LP Latch Type Toggle lamps 1.75 1.24 (44.4) (31.6) 4 (101.6) 4 x Ø0.28 (4 x Ø7.1) F 1.63 (41) 1.89 (48) GO-43101 Model D E F GO-43101 0.57 (14.4) 0.40 (10) 0.13 (3.2) 0.75 (19) 1.37 (34.8) 0.50 (12.7) D E 8.17 (207.6) 43110 & 43120 Holding apacity: 375 lbs. (170 kg) Weight: 0.40 lb. (180 g) GO-43110 supplied with 1/4-20 hook bolt GO-43120 supplied with hex head spindle assembly. 1.10 (28) 1/4-20 THD G -43120 0.71 (18) G -43110 0.87 (22) 0.10 (2.5) GO-43110 Optional latch plate model GO-43110-LP GO-43120 Optional latch plate model GO-43120-LP 0.47 (12) 0.83 (21) 0.79 (20) 1.38 (35) 2 x Ø0.26 (2 x Ø6.5) 3 (76.5) 43150 & 43160 Holding apacity: 660 lbs. (300 kg) Weight: 0.85 lb. (385 g) GO-43150 supplied with 3/8-16 hook bolt GO-43160 supplied with hex head spindle assembly. 1.42 (36) 2 x Ø0.33 (2 x Ø8.5) 3/8-16 THD G -43160 0.94 (24) G -43150 GO-43150 Optional latch plate model GO-43150-LP GO-43160 Optional latch plate model GO-43160-LP 0.91 (23) 0.47 (12) 0.13 (3.2) 0.75 (19) 0.94 (24) 1.57 (40) 4.53 (115) 540 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
40370 ross Ref.: DE-ST-O Model 375 Holding apacity: 4,000 lbs. (1,818 kg) Weight: 2.78 lbs. (1,260 g) oth the alloy steel base and the optional latch plate are forged for strength and durability. Latch Type Toggle lamps 3.13 (79) 2.25 (57.2) 5.71 (145) 2.20 (56) 1.37 1.63 (35) (41) Ø0.41 (Ø10.3) Ø0.63 (Ø16) 9.69 (246) GO-40370-LP 3.50 (89) 0.37 (9.5) 4 (102) GO-40370-LP GO-40370 1.13 (29) Model GO-40370 0.75 (19) 1.37 (34.9) 2.25 (57) 2.25 (57.2) 3.37 (86) 40380 ross Ref.: DE-ST-O Model 385 Holding apacity: 7,500 lbs. (3,400 kg) Weight: 3.25 lbs. (1,480 g) 5.79 (147) 2.91 (74) This extra heavy model and optional latch plate has all forged part construction. 3.13 2.25 (79) (57.2) 0.50 2.13 (12.7) (54) Ø Ø 8.63 (219) GO-40370-LP 2.19 (56) 3.75 (95) GO-40370-LP GO-40380 Model Ø Ø D 1.13 (29) 0.37 (10) Ø0.50 (Ø12.7) GO-40380 0.43 (10.3) 0.63 (16) 1.13 (28.6) 1.37 (34.9) D 2.25 (57.2) 2.25 (57.2) 3.37 (86) 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 541
No. 930 No. 930 Patented Designed for use in a wide range of applications. Self-adjusting, stainless steel tension springs help maintain balanced load forces. Up to 7/16" U-bolt adjustment. Padlock eye provides for up to a 3/8" diameter padlock shackle. Note: Hook not included. Order separately. Hook Options Maximum Load Rating No. 9674-3 Max. 1500# No. 7462 Max. 1000# No. 166-H Max. 300# No. 960 No. 960 Patented Extra-Heavy-Duty Draw Latch can be used in a wide variety of applications. It offers strength and durability and is rated at 8000 lbs. maximum pull. Features include: Up to 1" loop length adjustment. Safety thumb release helps ensure full locked engagement; provides a padlock eye for up to a 3/8" diameter padlock shackle. Stainless steel torsion spring automatically retracts the loop to prevent damage when not in use. Finish ody parts: E-coat Fasteners, loop and thumb release: Zinc Weight: 6.9 lbs. each No. 1-960 Extended Lever rm No. 970 Retractable Lever rm Note: Hook not included. 542 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900
HI-TORQUE & HI-GRIP NDLMPS Diameter and Ultimate Safety pprox. Optional Part Number Material Finish of band Width Tensile atch weight Sealing (mm) (mm) Strength (kg) Pins 27-HT070-115SS SS 70-115 16 200 0.125 27-HT090-135SS SS 90-135 16 200 0.130 27-HT130-175SS SS 130-175 16 200 0.145 27-HT170-215SS SS 170-215 16 200 0.155 613/7 SS, 613/9 SS 27-HT210-255SS SS 210-255 16 200 0.170 613/7 SS, 613/9 SS 27-HT250-295SS SS 250-295 16 200 0.180 613/7 SS, 613/9 SS 27-HT290-335SS SS 290-335 16 200 0.195 613/7 SS, 613/9 SS 27-HT330-375SS SS 330-375 16 200 0.210 613/7 SS, 613/9 SS 27SPG-HT070-115SS SS 70-115 16 40 0.130 27SPG-HT090-135SS SS 90-135 16 40 0.135 27SPG-HT130-175SS SS 130-175 16 40 0.145 27SPG-HT170-215SS SS 170-215 16 40 0.160 613/7 SS, 613/9 SS 27SPG-HT210-255SS SS 210-255 16 40 0.170 613/7 SS, 613/9 SS 27SPG-HT250-295SS SS 250-295 16 40 0.185 613/7 SS, 613/9 SS 27SPG-HT290-335SS SS 290-335 16 40 0.200 613/7 SS, 613/9 SS 27SPG-HT330-375SS SS 330-375 16 40 0.210 613/7 SS, 613/9 SS 57-HT250-295SS SS 250-295 16 450 0.205 502/7 SS, 502/9 SS 57-HT290-335SS SS 290-335 16 450 0.215 502/7 SS, 502/9 SS 57-HT330-375SS SS 330-375 16 450 0.230 502/7 SS, 502/9 SS 57-HT370-415SS SS 370-415 16 450 0.240 502/7 SS, 502/9 SS 57-HT410-455SS SS 410-455 16 450 0.250 502/7 SS, 502/9 SS 57-HT450-495SS SS 450-495 16 450 0.265 502/7 SS, 502/9 SS 57-HT490-535SS SS 490-535 16 450 0.275 502/7 SS, 502/9 SS 57-HT530-575SS SS 530-575 16 450 0.290 502/7 SS, 502/9 SS 57-HT570-615SS SS 570-615 16 450 0.300 502/7 SS, 502/9 SS 27-HGR070-115ZN MS ZN 70-115 13 150 0.117 27-HGR090-135ZN MS ZN 090-135 13 150 0.120 27-HGR130-175ZN MS ZN 130-175 13 150 0.133 27-HGR170-215ZN MS ZN 170-215 13 150 0.144 613/7 SS, 613/9 SS 27-HGR210-255ZN MS ZN 210-255 13 150 0.155 613/7 SS, 613/9 SS 27-HGR250-295ZN MS ZN 250-295 13 150 0.167 613/7 SS, 613/9 SS 27-HGR290-335ZN MS ZN 290-335 13 150 0.179 613/7 SS, 613/9 SS 27-HGR330-375ZN MS ZN 330-375 13 150 0.189 613/7 SS, 613/9 SS 27SPG-HGR070-115ZN MS ZN 70-115 13 25 0.122 27SPG-HGR090-135ZN MS ZN 090-135 13 25 0.126 27SPG-HGR130-175ZN MS ZN 130-175 13 25 0.138 27SPG-HGR170-215ZN MS ZN 170-215 13 25 0.149 613/7 SS, 613/9 SS 27SPG-HGR210-255ZN MS ZN 210-255 13 25 0.161 613/7 SS, 613/9 SS 27SPG-HGR250-295ZN MS ZN 250-295 13 25 0.171 613/7 SS, 613/9 SS 27SPG-HGR290-335ZN MS ZN 290-335 13 25 0.184 613/7 SS, 613/9 SS 27SPG-HGR330-375ZN MS ZN 330-375 13 25 0.194 613/7 SS, 613/9 SS 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 543
27-HT 27SPG-HT 57-HT 27-HGR 27SPG-HGR HI-TORQUE & HI-GRIP NDLMPS 544 620 Spicer St., kron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900