312 Cordless Compact Drill/ Driver Kit XRP 12-Volt High performance motor delivers 400 in.- lbs of maximum torque Dual speed range: 0-400/ 0-1,400 rpm delivers optimal performance Maximum durability and reliability withstands jobsite conditions DEWALT Cordless Compact Drill/ Driver Kit XRP 18-Volt DC728KA DW-728KA Cordless Drill/Driver Kit XRP 14.4-Volt Compact size: allows users to fit into tight spaces Lightweight design (3.8 lbs.) minimizes user fatigue 3/8" ratcheting chuck reduces bit slippage Dual speed range 0-400/0-1,450 rpm delivers optimal performance High performance frameless motor delivers maximum power of 200 unit watts out LED worklight provides increased visibility in confined spaces DC742KA Cordless Compact Drill/ Driver Kit XRP 14.4-Volt DW-742A 1/2" ratcheting chuck lock prevents bits from slipping Series 4000 high torque motor delivers 450 in.-lbs. of maximum torque Exclusive 3-speed all metal transmission has a Max 3rd speed at 0-1800 RPM which is 29% faster than high speed Extended run time batteries provide more work per charge and maximum number of recharges with no memory UL listed, meets OSHA requirements, NOM, ANCE Includes: 1 hr charger, (2) 14.4 V XR Pack batteries, double ended screwdriver bit and heavy-duty kit box No Load Speed: 0-450/0-1400/0-1800 RPM, Capacity in Steel: 1/2 in., Capacity in Wood: 1 3/4 in., Spindle Thread: 1/2 in. - 20 Compact size: allows users to fit into tight spaces Lightweight design (4.8 lbs.) minimizes user fatigue 1/2'' ratcheting chuck reduces bit slippage Dual speed range 0-500/0-1,700 rpm delivers optimal performance High performance frameless motor delivers maximum power of 410 unit watts out LED worklight provides increased visibility in confined spaces DC720KA Cordless Drill/Driver Kit XRP 18-Volt DW-720KA 1/2 single sleeve keyless ratcheting chuck for tighter bit grip Compact size: fits into the tightest conditions Lightweight design minimizes user fatigue DW-920KX DW-920KX DEWALT built built high power, high efficiency motor delivers 510 unit watts out of power for maximum performance in all drilling and fastening applications XRP extended run-time batteries provide long run-time & battery life Heavy-duty 1/2" axial locking chuck locks the sleeve to prevent bits from slipping and falling out Patented 3-speed all-metal transmission matches the speed to the application for optimal performance
914-636-0505 Phone 914-636-8951 Fax 313 Superior ergonomics optimize balance, size, and weight UL listed, meets OSHA requirements, NOM, ANCE Includes: 1 hr charger, (2) 18 V XR+ Pack batteries, 360 deg. side handle, and heavy-duty kit box No Load Speed: 0-450/0-1500/0-2000 RPM, Capacity in Steel: 1/2 in. Cordless Drill/Driver Kit Lithium Ion 18-Volt Cordless Drill/Driver Kit Lithium Ion 18-Volt DC940KX DW-940KX Cordless Drill/Driver Kit Lithium Ion 12-Volt The M12 Cordless LITHIUM-ION 3/8" drill driver delivers 275 in-lbs of torque in a compact light weight design. The only tool in its class with an all metal locking chuck, the 2410-22 drills and fastens up to 35% faster than the competition. The on board fuel gauge displays remaining run-time, while a built in L.E.D. illuminates work surface. Includes: 2410 M12 Cordless LITHIUM-ION 3/8 Drill Driver (2) M12 RED LITHIUM Batteries 30 Minute Charger Carrying Case 2410-22 M-2410 As the cornerstone of the M18 Cordless LITHIUM-ION High Performance 1/2" Drill Driver delivers revolutionary power, run-time, and ergonomics. The new Milwaukee 4-Pole Frameless Motor generates a best-in-class 750 in-lbs of torque to meet the application rigors of the jobsite. Utilizing the new M18 XC High Capacity RED LITHIUM battery, the 2610 delivers up to 65% more holes per charge. At only 91/4" long and 5.3 lbs, it is the most compact high performance drill/driver available, which minimizes user fatigue and maximizes productivity by fitting into tight spaces. The 2610 incorporates an easy to use š" single-sleeve ratcheting metal chuck with carbide jaws for maximum grip. Other features include the Battery Fuel Gauge, which displays remaining run-time and the Built-in LED Light that illuminates work surface. Includes: 2610-24 M18 Cordless LITHIUM-ION High Performance 1/2" Drill Driver (2) M18 18 XC High Capacity RED LITH- IUM Batteries - 48-11-1828 M18 Charger - 48-59-1801 Side Handle Carrying Case 2610-24 M-2610 18V XC High Capacity LITHIUM-ION battery delivers longer life and run-time Milwaukee 4-Pole Frameless Motor maximizes tool efficiency to increase run-time Single-sleeve ratcheting metal chuck with carbide jaws On-board Battery Fuel Gauge displays remaining run-time Built-in LED Light illuminates work surface Variable speed trigger 2601-22 M-2601 VSR Drill 3/8" VSR Drill Helical-cut steel, heat-treated gears for increased durability and long gear life Single-sleeve keyless chuck with spindle lock provides greater bit retention and toolfree convenience Two-finger trigger for increased comfort Keyless Chuck: Yes, Chuck Size: 3/8 in., No Load Speed: 0-1,500 RPM, Amp: 6.7, Max. Watts Out: 520 W DW222 DW-222
314 VSR Drill End Handle Drill VCR Drill Magnum 1/2 chuck size Keyless chuck with spindle lock allows the user to crank down on bit shanks so they won't slip in the chuck while in use Helical cut steel, heat treated gears for increased durability and long gear life Patented brush system provides more even wear for long brush life Rubber grip for increased comfort Ergonomic design provides user with greater comfort for longer use Ball bearing construction provides increased durability and long life Metal gear housing for jobsite durability and increased reliability Two-finger trigger for increased comfort 360 deg. side handle for greater control and versatility UL listed, meets OSHA requirements, CSA certified, NOM, ANCE Includes: Chuck key with holder No Load Speed: 0-850 RPM, Amperage: 7.8, Maximum Watts: 600, Gear Reduction: Double 1/2 chuck size Keyless chuck with spindle lock allows the user to crank down on bit shanks so they won't slip in the chuck while in use Helical cut steel, heat treated gears for increased durability and long gear life Patented brush system provides more even wear for long brush life Rubber grip for increased comfort Ergonomic design provides user with greater comfort for longer use Ball bearing construction provides increased durability and long life AC/DC, reversing switch 100% ball-bearing construction provides durability and longer tool life Die-cast metal gear housing for jobsite durability and tool reliability 3-position auxiliary side handle for greater control for all drilling applications Triple gear reduction provides increased torque and reduces gear stress UL listed, meets OSHA requirements, CSA certified, NOM, ANCE Includes: 3 position side handle and chuck key with holder No Load Speed: 600 RPM, Amperage: 7.0, Maximum Watts: 580 Powerful 7.0 amp motor, 0 to 2500 rpm, variable speed control All metal Grip-Lok 2-sleeve keyless chuck for a stronger hold on the bit All metal gear case and diaphragm 10 ft. 2-wire rubber cord 360 locking side handle Ergonomic tactile grip and two finger trigger for user comfort and balanc 0201-20 M-0201 VSR Drill Magnum DW235G DW-235G DW140 DW-140 With keyed chuck Powerful Milwaukee built 5.5 Amp motor Removable brush cartridge system: Change brushes in less than one minute, with only a screw-driver. Self-stopping brushes. Includes spare brushes stored in cartridge Aluminum gear case and diaphragm supplies greater support for shaft and bearings Heavy-duty industrial chucks Trigger speed control reversing switches All ball and roller bearings Helical cut, heat treated gears for heavyduty industrial/construction applications
914-636-0505 Phone 914-636-8951 Fax 315 8' 3-wire Quick-Lok cord sets: Quick detachment from tool for tangle free carrying and storage. Instant field repair 0234-6 M-0234 Cordless Hammer Drill Kit XRP 18-Volt DEWALT built high power, high efficiency motor delivers 510 unit watts out of power for maximum performance in all drilling and fastening applications Heavy-duty 1/2" self-tightening chuck tightens throughout operation providing superior bit gripping torque XRP extended run-time batteries provide long run-time & battery life Patented 3-speed all-metal transmission matches the speed to the application for optimal performance Superior ergonomics optimize balance, size, and weight DC-950KX Hammer Drill Kit Magnum DW-950KX Trigger speed control, reversing For percussion carbide bit drilling in concrete, masonry and drilling in wood or metal Drives concrete screw fasteners Ball and roller bearing Cut steel gears for heavy duty applications Kit includes 5370-1 Percussion Bits: 3/16" x 3", 1/4" x 4", 5/16" x 4", 3/8" x 4" Percussion Bits: 3/16" x 3", 1 5387-22 M-5387 Drywall Screwdriver Ball bearing construction provides increased durability and long life Patented brush system provides more even wear for long brush life Rubber grip, ergonomic design increase user comfort Helical-cut steel, heat-treated gears provide increased durability and long life over continuous use Depth-sensitive set and forget nosepiece for consistent fastener depth Two-finger trigger for increased comfort Hi-speed transmission for production drywall hanging Lightweight with excellent ergonomics UL listed, meets OSHA requirements, CSA certified, NOM, ANCE AMP: 6.0, Drywall Screwdriver Powerful 6.5 Amp Milwaukee motor Variable speed control, 0-4000 RPM Lightweight design-only 3.49 Lbs Quiet snap-action clutch Ramp-off depth locator* Patented locator design positively maintains setting when removed from tool Improved guidance system for less run-out All metal gear case and diaphragm Ergonomic tactile grip on handle and motor housing New switch with two-finger trigger Removable belt clip with integral bit storage Modular brush card design All ball and roller bearings 10' 2-Wire rubber cord Includes #2 drywall bit tip and magnetic bit tip holder Volts AC Only: 120, Amp: 6.5, No Load RPM: 0-4000, Bit Shank Size: 1/4 in. Hex, Spindle Offset:.92, Length: 12.7, Ship. Wgt.: 4.1 lbs. 6742-20 M-6742 BLACK AND DECKER Cordless Screwdriver Heavy duty industrial 1/2" chuck Removable brush cartridge system change brushes in less than one minute with only a screwdriver. Includes spare brushes stored in cartridge Self stopping brushes DW255 DW-255 6V High Performance Cordless Screwdriver 24 Position Clutch Dual Speed Range On Board Bit Storage
316 4-Position Pivoting Action Retractable Tape Measure Forward/Reverse Rocker Switch Integrated Light & Quick Release Mechanism For Easy Bit Changing. PD600 BOSCH TOOLS Demolition Hammer SDS-max BD-600 BOSCH TOOLS Demolition/Breaker Hammer Brute Features: 18V XC High Capacity LITHIUM-ION battery delivers longer life and run-time Patented Gear-Protecting Clutch extends the life of the tool Lever Action QUIK-LOK Blade Clamp Battery fuel gauge displays remaining runtime Variable speed trigger 2620-21 M-2620 Sawzall Kit SDS-max bit system - tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate Variable-speed dial - for controlled chipping applications Constant Response circuitry provides soft-start, maintains constant speed under load, provides overload protection Service Minder light - indicates when preventative maintenance is required Vario-Lock positioning - rotates and locks chisel into 12 different positions to optimize working angle Padded rear handle - absorbs shock for operator comfort 360 deg. auxiliary handle - provides a wide range of movement along with operator comfort Double insulated, UL listed, complies to OSHA requirements Voltage: 120 VAC, Amperage: 14, Loaded: 900-1890 BPM, Impact Energy: 4.4-18.4 ft./lbs., Length: 22.5 in. 11316-EVS B-11316 The plug-in-anywhere breaker hammer - does not need a compressor Total portability - operates on 2500 W portable generator Service-minder brush system - shuts the Brute off when brush replacement, lubrication or preventative maintenance is needed Grease packed gear box and hammer mechanism - eliminates uncertainty of jobsite lubrication Shock mounted handles - absorbs vibration to reduce operator fatigue 2-way tool retainer - accepts standard 1 1/ 8" hex, air tool steel with retaining collar or internal locking combo steel AMP: 15, Voltage: 120 VAC/VDC, Loaded: 1400 BPM, Impact Energy: 43 ft./lbs., Length: 29.75 in. 11304 B-11304 Cordless Sawzall Kit Truly an over achiever, this cordless SAWZALL powered by an 18V XC High Capacity LITHIUM-ION battery offers up to 75 more cuts per charge and is designed to cut up to 30% faster with less vibration. The 2620 features a patented gear-protecting clutch, which absorbs impact and extends the life of the tool. The QUIK-LOK blade clamp provides quick and efficient blade changes while the variable speed trigger optimizes speed for different applications. Weighing only 7.9 lbs, the saw is designed for maximum power, operator comfort and convenience, including an on-board fuel gauge that displays the remaining run-time. Legendary sawzall durability Adjustable pivot shoe allows more efficient use of blade and depth of cut control Easy access to pivot shoe adjusting screws All ball and roller bearings Volts AC Only: 120 Amps: 10 Length of Stroke (in.): 3/4 Strokes per Minute: 0-2800 Overall Length (in.): 17.3 Cuts: Wood and nail embedded wood Steel, cast iron, aluminum and brass Drywall, plaster and composition materials Hard rubber, cement, brick and fiberglass No starting hole needed for plunge cuts into floors or walls Heavy duty cord positioned for easier plunge cutting 6509-22 M-6509
914-636-0505 Phone 914-636-8951 Fax 317 Sawzall Kit Counter Balance Mechanism: Anti vibration system smoothest operating, most vibration free saw in the world Gear Protecting Clutch: Unique gear clutch absorbs high impact forces caused by sudden blade lock-ups. Extends life of tool in extreme cutting applications Powerful built motor Trigger speed control Dial Speed Selector switch matches the correct speed with application for improved control Shoe release lever: Adjusts shoe without use of tools. Allows more efficient use of blade and depth-of-cut control Pivot shoe for maximum support against work surface Heavy-duty double bearing wobble plate mechanism for extra long life Rubber boot for superior gripping and operator comfort Heavy-duty steel quik-lok blade system 6536-21 M-6536 Sawzall Kit DW304PK DW-304PK 7-1/4 Circular Saw Rear pivot depth of cut adjustment allows your hand to remain behind the tool at all depth of cuts Powerful 15.0 Amp, 2,075 MWO motor made for long life and difficult applications Heavy-gauge, high-strength aluminum alloy base for increased durability on worksite 50 deg. bevelling capacity increases capacity in various applications Electric brake stops blade after use 100% ball and roller bearings extend life of tool Includes: 24T carbide tipped blade and blade wrench Amp: 15.0, Max Watts Out: 2,075 W No Load Speed: 5,800 RPM Spindle Lock, Electric Brake Bevel Capacity: 50 deg. DW364 DW-364 7-1/4 Circular Saw Powerful motor enough for the toughest applications 56 deg. beveling capacity allows for more aggressive angle cuts Clear line of sight aids in blade visibility from any angle Lower guard design improves performance when making bevel cuts and cutting shims ULus listed, CSA certified, meets OSHA requirements, NOM, ANCE, double insulated Includes: 24T carbide tipped blade and blade wrench and heavy-duty kit box Amperage: 15.0, Maximum Watts: 2200 No Load Speed: 5800 RPM DW368 DW-368 8-1/4 Circular Saw Rear pivot depth of cut adjustment allows your hand to remain behind the tool at all depth of cuts 15.0 Amp, high-torque motor for increased productivity 50 in. bevel capacity increases range of applications Heavy-gauge, high-strength aluminum alloy base for increased durability on worksite Electric brake stops blade after use 4-position blade clamp allows for flush cutting and increased versatility Powerful 10.0 Amp motor designed for heavy-duty applications Lever-action keyless blade clamp for quick and easy blade changing 0-2,800 strokes per minute and 1-1/8" stroke length deliver fast cutting Variable speed trigger provides improved control Includes metal cutting blade and Heavy- Duty Reciprocating Saw Kitheavy-duty kit box Lightweight tool ergonomically designed to reduce user fatigue and increase productivity DW384 DW-384
318 7-1/4 Circular Saw Tilt-Lok 7-1/4 Worm Drive Saw 5.5 Amp motor deliver powerful cuts in the hardest materials Variable speed delivers 0-3,100 strokes per minute for optimal cutting speed 4-position orbital action allows for faster, more aggressive cuts in a variety of materials All-metal gear case provides superior durability on a professional site Shoe bevels 0 to 45 for beveled cuts Exclusive adjustable main handle: The 8- position locking handle adjusts to the cutting application for maximum comfort and control 15 Amp, 3.25 maximum horse power motor: Most powerful circle saw cuts tough materials including headers, microlams and wet lumber with ease Maximum power-to-weight ratio: Lightest 7 1/4", 3.25 max HP circular saw Light weight reduces operator fatigue, maximizes performance and control Fast, smooth adjustments: Depth lever and bevel adjustments easy to access and operate Cushion front grip/rear handle: Maximizes comfort and control Maximum sight line Convenient bevel scale: Scale faces operator for quick and accurate bevel adjustment One-touch spindle lock: Convenient button on top of saw for easy access Milwaukee durability: Hardened steel helical gears, ball and roller bearings, impactresistant glass reinforced nylon motor housing, aircraft aluminum shoe, durable, flexible rubber cord set, 22 Amp high capacity switch 15 Amp circular saw with Tilt-Lok handle, carbide blade, hex blade wrench and impact resistant carrying case. Volts: 120 AC-DC, Amp: 15.0 No Load Speed RPM: 5800 Arbor: 5/8 in., Depth of Cut at 90 deg.: 2 7/ 16 in., Depth of Cut at 50 deg.: 1 11/16 in., Depth of Cut at 45 deg.: 1 13/16 in., Ship Wgt.: 17.5 lbs. 7 1/4" Worm saw, combination blade and 9/16" wrench Easily cuts through materials including headers, microlams and wet lumber without stalling Fast, Smooth Adjustments: Depth lever and bevel adjustments easy to access and operate Maximum Sight Line: Left blade design allows for maximum cut visibility Maximum Control: Two handle design and enhanced weight provide increased control and stability External Brushes: For fast and easy replacement Spindle Lock: For fast and easy blade replacements Heavy Duty Worm Gears: Hardened steel worm gearing for maximum torque in the toughest applications Extra long, 9 flexible rubber cord Rigid steel shoe provides maximum strength Volts AC-DC: 120, Amps: 15.0, No Load RPM: 4400, Arbor: Diamond 6477-20 M-6477 Orbital Jig Saw Kit DW317K DW-317K 4-1/2 Angle Grinder 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection Dust Ejection System provides durability by ejecting dust particles that enter the tool through the air intake vents Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces One piece brush arm prevents brush hangup due to dust ingress Quick-change wheel release provides easier and quicker wheel removal without the need for a wrench Keyless adjustable guard provides tool free guard adjustment thus increasing productivity Vibration reducing removable side handle provides user comfort and reduces user felt vibration Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage Oversized, protected spindle lock button provides easier and quicker wheel changes Paddle switch lock-off provides the user protection from accidental start up Matching wheel flanges allow the use of common accessories 6390-21 M-6390 D28402 DW-28402 Keyless blade clamp for fast, easy blade installation and removal
914-636-0505 Phone 914-636-8951 Fax 319 4-1/2 Angle Grinder 5/8" - 11 spindle size Powerful 5.5 Amp 0.75 maximum HP motor with long life brushes and high output fans: Provides high performance power for grinding, cutting and finishing operations Optimum speed for various accessories: Including resin bonded abrasives, wire brushes, resin fiber discs and abrasive flap discs All ball and roller bearing construction Spiral bevel gears: For optimum motor torque transfer, improved performance and durability. Replaceable armature pinion gear Cast aluminum gear housing with recessed spindle lock: Accessory change is fast and easy-single wrench operation 3 position side handle Adjustable wheel guard: Tool-free adjustment When used as a grinder, guard must be used for O.S.H.A. compliance. Standard Equipment: Side handle, spanner wrench, grinding disc, Type 27 guard flange and flange nut. Spindle Size: Flange designed to accommodate 7/8" hub depressed center wheel, diamond blades, and Type 1 wheels (use Type 1 guard) Speed RPM: 10000, Disc Dia.: 4 1/2 in., Volts AC-DC: 120, Amp: 5.5, Power Output: 560 W, Maximum Horsepower:.75, Spindle Size: 5/8 in. - 11, Length: 10 1/2 in., Ship Wgt.: 6 lbs. 6146-31 M-6146 7 /9 Angle Sander/Grinder Motor provides high power and speed for all 7 in. and 9 in. sanding applications AC/DC capacity works off welding machines and generators for increased productivity and versatility Overload protection protects motor from damage during heavy load applications Extremely durable aluminum gear and motor housings resist breaking even under the most severe conditions External brush caps for easy servicing Can be used as a grinder with proper optional guarding system UL listed, CSA certified, meets OSHA requirements, NOM, ANCE, grounded Includes: 2 position side handle Amperage: 15.0, Maximum Watts: 2777, No Load Speed: 5000 RPM, Use Wheels RPM Above: 6000 RPM Spindle Thread: 5/8 in. - 11, Tool Length: 18.5 in. DW28497 DW-28497 Palm Grip Sander Kit Provides a superior finish Dual plane, counter-balanced low-vibration design reduces user fatigue Dust-sealed switch prevents contamination Sealed 100% ball-bearing construction UL listed, meets OSHA requirements, CSA certified, NOM, ANCE, double insulated Includes: Dust bag and sandpaper punch and heavy-duty kit box Amperage: 2.0, Orbits/Minute: 13500 opm, Orbit Diameter: 1/16 in., Paper Size/Type: 1/4 sheet DW26441K DW-26441K Belt Sander Powerful 8.0 Amp motor aggressively removes material in a variety of applications All-metal housing increases durability during a drop Three wheel design delivers lowest center of gravity and longest 3 in. x 21 in platen available Innovative dust collection system is 20% more efficient than conventional dust bags Dust collection shut-off eliminates dust stream toward users when collector is not in use Two position front handle increases user comfort Top exit cord allows for easy use of overhead reciptacles Rubber grips reduce vibration DW432 DW-432 Router 1-3/4 HP (maximum motor HP), 11.0 Amp motor provides the power to rout smoothly through the toughest hardwoods Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset location
320 Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking Quick release motor latches for fast and easy motor pack removal for bit and base changes Detachable cordset offers cordset serviceability and removes the need for a "shorty" cord motor pack Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control Dust-Sealed Switch protects against dust ingestion for longer switch life Heavy-duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight Nickel plated motor housing for a smooth, long-lasting depth adjustment Right or left switch and cordset location provides the ability to have the switch in your right or left hand Flat top for easy bit and depth changes Self-releasing, long, eight slotted collets for better bit retention and elimination of frozen bits DW616 DW-616 DREMEL Rotary Tool Kit 10.8V Lithium-ion Cordless Rotary Tool Kit, Includes Tool, 3 Hour Charger, 40 Accessories & Case, Variable Speed 5,000 To 35,000 RPM With The Same Torque & Speed As A Corded Tool, The Battery Holds A Charge 6 Times Longer Than Standard Nickel Cadmium & Will Hold A Charge For 2 Years. 8000-03 DREMEL DREMEL Engraver Complete engraving work on a wide variety of materials metal, plastic, glass, ceramic, wood and even leather Stroke adjustment dial regulates engraving depth Light and compact design provides comfortable use for precision engraving performance Replaceable points to engrave on soft or hard materials Volts: 120 290 ENGRAVER WAGNER Heat Gun Heavy Duty Industrial Heat Gun, Model 775, 750 Degrees F Temperature, 5700 BTUs, 14 A, Cast Magnesium Housing For Durability At Minimal Weight & Good Heat Dissipation, Permanent-Sealed Bearing, Long-Life Motor & Replaceable Heat Element, Use To Strip Paint, Loosen Rusted Parts, Thaw Frozen Pipes, Shape Plastics & Many Other Shop, Home & Automotive Uses, 3-Wire Electrical Cord, UL Listed, 2 Year Home-Use Guarantee, Packaged In An Attractive 4-Color Display Box. 0283022 HEATGUN RIDGE TOOL COMPANY SeeSnake Micro Inspection Camera The new RIDGID SeeSnake micro Inspection Camera allows you to easily perform visual inspections in hard to reach areas. Its lightweight, handheld design means that it can be carried anywhere providing solutions when and where you need them, while allowing you to offer more services and increase productivity. Waterproof Camera Head and Cable Fully Adjustable LED Lighting Flexible 3 ft. Cable Twist and Lock Attachments 4-AA Batteries Comfort Grip High Visibility 2.5 Inch Color LCD Protective Storage Case Desc. 25643 Camera CAMERASNAKE 26658 3 replacement CAMERASNAKE-3 cable 29753 6 replacement cable CAMERASNAKE-6 6 Bench Grinder Powerful 5/8 HP induction motor for heavy duty grinding operations Industrial cast iron base and motor housing provide durability and prolong life Motor runs at 3,450 RPM for high speed material removal
914-636-0505 Phone 914-636-8951 Fax 321 Precision-machined aluminum tool rests allow the user to accurately position work Rear exhaust ports in wheel guards for smoother operation 12 1/2" distance between wheels for longer and larger grinding applications Includes: 36 grit wheel, 60 grit wheel, eye shields, spark deflectors, tool rests and adjusting wrench Amp (AC): 4.0, Horsepower: 5/8 HP No Load Speed: 3,450 RPM Wheel Diameter: 6 in., Spindle Diameter: 1/2 in., Adjustable Tool Resets Tool Length: 15 in. XRP 14.4-Volt 12-Volt DW756 XRP 12-Volt DW-756 Extended Run Time Battery for Dewalt Cordless Drill #728KA 25% more run-time than compact batteries 15% smaller than XR+ Pack batteries 10% lighter than XR+ Pack batteries Voltage: 14.4 V DC9091 XRP 18-Volt DW-9091 12 Volt 1.3 Amp Hr Power-Plus-Battery for Milwaukee T-Handle Drill #0602 <PgfTag Bulleted Compatible with all 12 volt Milwaukee tools and work light 48-11-1967 M48-11-1967 14.4-Volt 12 Volt Battery for Dewalt Cordless Drill #DW-727KA Compatible with DW9106, DW9118, DW9107, DW9108, DW9108220, DW9116, DW9109, DW9117, DW911 chargers. DC9071 DW-9071 High capacity, 18 Volt, 2.4 Amp Hour battery for Dewalt Cordless Drill #DW-920KA 40% more run-time than XR Pack batteries. 14.4 Volt 1.7 Amp Hr Power-Plus Battery for Milwaukee T-Handle Drill #6012 <PgfTag Bulleted Compatible with all 14.4 volt Milwaukee tools and work light 48-11-1014 M48-11-1014 DC9096 DW-9096
322 18-Volt Charges battery packs at a slower rate when battery pack temperature is below 40 deg. F or above 105 deg. F 48-59-0255 M48-59-0255 DEWALT Battery Charger 18 Volt 2.4 Amp Hr Power-Plus Battery Compatible with 18 volt Milwaukee all tools and work lights except 6516-20, 6516-21, 6516-22, 6516-23, 1108-20, 1108-21, 3108-21, 5364-20, 5364-21. 48-11-2230 M48-11-2230 Battery Charger Charges all DEWALT 7.2V - 18V NiCd/ NiMH/Li-Ion batteries (except Univolt batteries) so users need only one charger for multiple cordless products Charges the battery in 1 hour or less thus minimizing downtime The DEWALT 3-stage charging system provides maximum run-time and extends overall life of the battery Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace pack, and battery too hot or too cold DC9310 DW-9310 One Hour NiCd Power Plus 120 volt AC charger Rugged Construction withstands 3' drop to concrete with battery attached Generator, inverter and long extension cord ready-due to wide input voltage range of AC charger Maximizing battery pack life Charge between 40 deg. F to 100 deg. F Allow battery pack to cool before charging Do not deeply discharge battery Store batteries in cool places Occasionally charge battery packs overnight to top-off individual cells in pack 2-Step charging performance 1 hour fast-charge mode Maintenance mode-keeps the battery pack fully charged while on charger Temperature protection circuitry