SMART SOLUTIONS FOR WATER 600 Series Hydraulic Control Valves Waterworks Irrigation

SMART SOLUTIONS FOR WATER 600 Series Hydraulic Control Valves Waterworks Irrigation

COMPANY PROFILE ARMAŞ A.Ş. was founded in 998 to produce valves for potable water and agricultural irrigation systems. It has become one of the leader establishments of its sector in a short time thanks to ARMAŞ makes valves. ARMAŞ A.Ş. has given high quality services with economical prices to his costumers in industry, potable water networks and agricultural irrigation systems by means of Hydraulic Control Valves, Automatic Filtration Systems, Gate Valves, Ball Valves, Strainers, Check Valves, Air Valves and Hydrants he produced. Our company who does not sacrifice quality in production has used ISO 900-000 Quality Management System since 000. In the scope of importance we gave for both human and environment, we have developed our institutional structure day by day with ISO 00 Environmental Management System Certificate and TS 800 Occupational Healthy and Safety Certificate since 007. Our products have been subjected to pressure and performance tests before sales by Quality Control Department and technical support services have been given at the installation, operation and maintenance stages after sales by our experienced engineers. Our company who have continued R&D investments in order to present more quality and reliable products to his costumers, will continue its costumer-satisfaction focused services with increasing achievements in future thanks to his dynamic staff, powerful brand and permanent developing structure.

INDEX 6 HYDRAULIC CONTROL VALVES 8 MAIN PARTS and TECHNICAL SPECIFICATIONS 0 WEIGHT and DIMENSION DIAPHRAGM SELECTING TABLE HYDRAULIC PERFORMANCE MANUAL CONTROL VALVE SOLENOID CONTROLLED VALVE 6 PRESSURE REDUCING VALVE 7 SOLENOID CONTROLLED PRESSURE REDUCING VALVE 8 PRESSURE SUSTAINING VALVE 9 DIFFERENTIAL PRESSURE SUSTAINING VALVE 0 PRESSURE REDUCING and SUSTAINING VALVE FLOAT LEVEL CONTROL VALVE ELECTRIC FLOAT LEVEL CONTROL VALVE DIFFERENTIAL FLOAT LEVEL CONTROL VALVE FLOW RATE CONTROL VALVE QUICK PRESSURE RELIEF VALVE 6 SURGE ANTICIPATING VALVE 7 HYDRAULIC CHECK VALVE 8 PUMP (BOOSTER) CONTROL VALVE 9 DEEP WELL (SUBMERSIBLE) PUMP CONTROL VALVE 0 EXCESSIVE FLOW SHUT-OFF CONTROL VALVE REMOTE CONTROL VALVE PLC CONTROLLED VALVE ALTITUDE CONTROL VALVE BI-LEVEL ALTITUDE PILOT CONTROLLED LEVEL CONTROL VALVE TWO STAGE OPENING VALVE 6 FLOW RATE CONTROL and PRESSURE REDUCING VALVE 7 OTHER PRODUCTS M EL PR PREL PS DIF PRPS FL FLEL DIFL FR QR SA HCV PC DPC FE RC EC ALT ALT-B TSO FRPR

600 SERIES HYDRAULIC CONTROL VALVES GENERAL Armaş 600 series valves are the direct diaphragm closing automatic hydraulic control valves which work with line pressure. It ensures easy and smooth flow with minimum pressure losses thanks to excellent design of valve body and diaphragm. No wearable parts such as stem, bearing and seat exist in main valve body, valve life is much longer than other competitor valves. Only movable part of valve is diaphragm. Armaş 600 serial hydraulic control valves are designed so that it can be used in potable water force network, agricultural irrigation, fire fighting, filtration, industrial applications by even an unskilled personal. Easy use and maintenance due to simple design Low cost Operation in wide pressure range Perfect modulation even in lower flow rates Anti-surge closing and opening with flexible diaphragm Full tightness thanks to reinforced diaphragm and inner spring Long life with epoxy-polyester coating Wide control application range by using different pilot valves Operation in both horizontal and vertical positions in application areas 6

600 SERIES HYDRAULIC CONTROL VALVES WORKING PRINCIPALS It is automatic hydraulic control valve designed for make desired modulation processes in main valve network line as full hydraulically by means of line pressure without requiring different energy sources such as electric, pneumatic on mechanic energy. P Pa P P A Valve Closing Mode When pilot valves connected on main valve transport water pressure in valve upstream to valve actuator (control chamber), water creates a hydraulic power on valve diaphragm. This power formed, by combining with extra power applied by inner spring, ensures that valve will be closed as full tightness. Pa Valve Opening Mode B When way of pilot valve located on main valve being in closed position is brought into relief position, pressurized water within control chamber on main valve diaphragm is released. When line pressure (P) reaches to the value which will overcome spring power, water carries valve to fully open position by applying a hydraulic power to valve diaphragm from bottom. P P Pa P P C Modulation Mode Pilot valves which are connected to main valve actuator ensure that main valve works in modulated mode. According to flow rate or pressure conditions, it ensures that main valve works in modulated mode by controlling pressure of fluid within main valve actuator (control chamber). 7

600 SERIES MAIN PARTS and TECHNICAL SPECIFICATIONS 9) Position Indicator Kit NO PART NAME MATERIAL Body Diaphragm Standard: GG (Cast Iron) Optional: GGG0 (Ductile Iron) Standard: Nylon reinforced Natural Rubber Optional: EPDM, Nitrile, Neoprene MAIN PARTS Spring Thrust Ring Polyamide Cover Standard: GG (Cast Iron) Optional: GGG0 (Ductile Iron) Spring Standard: SST 0 Optional: SST 6 6 Washer Standard: Coated Steel Optional: SST 7 Bolt Standard: Coated Steel Optional: SST 8 Lifting eye-bolt Standard: Coated Steel Optional: SST 9 Position Ind. Kit (Optional) Standard: SST+Brass 8

600 SERIES MAIN PARTS and TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS PRESSURE RATING TEMPERATURE CONNECTION COATING HYDRAULIC CONNECTIONS ACTUATOR TYPE Standard 0,7-6 bar (0-0 psi) Low Pressure Range 0, - 0 bar (7, - 60 psi) High Pressure Range 0,7 - bar (0-60 psi) Min. Operating Temperature - 0 C ( F) DIN 0/ Max. Operating Temperature 80 C (76 F) DIN 0/ Flanged Standard: EN 09/ Optional: ANSI, BS 0-E Threaded Standard: BSP Optional: NPT Grooved End Victaulic Standard Epoxy Optional Polyester Standard Reinforced Nylon (Air Brake) Hydraulic Pipe SAE J 8 Optional Copper, SST Diaphragm Closing Type with Single Control Chamber and Diaphragm Actuator 67 67D 66 66D 6 6 6D SPECIFICATIONS MODELS CONNECTION Flanged Flanged Threaded Threaded Threaded Grooved End Grooved End MATERIAL GG GGG0 GG GGG0 GG GG GGG0 BODY Straight Straight Straight Straight Angle Straight Straight MAXIMUM OPERATING PRESSURE 6 bar 0 psi bar 60 psi 6 bar 0 psi bar 60 psi 6 bar 0 psi 6 bar 0 psi bar 60 psi INCH MM INCH MM INCH MM INCH MM INCH MM INCH MM INCH MM 0 0 ½ 0 ½ 0 0 0 0 ½ 6 ½ 6 0 0 ½ 6 ½ 6 ½ 6 80*0 80*0 ½ 6 ½ 6 80 80 80 AVAILABLE SIZES 80 80 80*0 80*0 00 00 00 00 80 80 80 6 0 6 0 8 00 8 00 0 0 0 0 00 00 9

600 SERIES WEIGHT and DIMENSION H D DN D L H WEIGHT L - ½ - - - inch mm inch mm inch mm inch mm Lbs kg. 0 6,6 66, 7,9 00 6,, 7 ½ 6 7, 86, 8, 6, 6 9, 80*0 7,9 00 8, 6, 60, 0 H L 6-8 - 0 D MODEL 67 80 8,0 0, 9 7, 8 6, 6, 00 9,,0 0 7,7 9, 0,7 8, 0,0,, 69 8,0 0,8 6 0, 90,9 0,8 0, 7, 8 00, 9, 9,7 00 77, 80, 0 0 6,,, 6 8, 6, 6 H D 00 9, 9,0 609 9, 87,, 6 L H D DN D L H WEIGHT L - ½ - - - inch mm inch mm inch mm inch mm Lbs kg. 0 6,6 66, 7,9 00 6, 8,7 8, ½ 6 7, 86, 8, 6, 6, H L 6-8 - 0 D MODEL 67D 80*0 7,9 00 8, 6, 60 7,, 80 8,0 0, 9 7, 8 6, 00 9,,0 0 7,7 9,,7, 0,0,, 69 8,0 0 6,6 8 6 0, 90,9 0,8 8,8 8 00, 9, 9,7 00 7,6 08 0 0 6,,, 6 8, 6 90, H D 00 9, 9,0 609 9, 87, 8 7 L 0

600 SERIES WEIGHT and DIMENSION DN D L H WEIGHT inch mm inch mm inch mm inch mm Lbs kg. H D MODEL 66 ½ 0,6 66 6, 6, 87 6,6 0, 8 7, 8, 08 8,8 ½ 6,7 9 8, 6, 9,9, L 80*0, 0 8,7 0,7 0,, 80, 0,7,9, DN D L H WEIGHT inch mm inch mm inch mm inch mm Lbs kg. H D MODEL 66D ½ 0,6 66 6, 6, 87 8,8 0, 8 7, 8, 08,, ½ 6,7 9 8, 6,, 6, L 80*0, 0 8,7 0,7 0 7,6 8 80, 0,7,9 8,6 H D MODEL 6 DN D L H WEIGHT inch mm inch mm inch mm inch mm Lbs kg. 0, 80, 0, 6,6 ½ 6,7 9 6, 6 6, 6 L 80, 0 8, 8,8, DN D L H WEIGHT H D L MODEL 6 inch mm inch mm inch mm inch mm Lbs kg. 0, 6 7, 8,0 0, 6,6 ½ 6,0 76 8,6 8, 08 8,8 80, 89, 08,9, 00,,, 8, 8,6 DN D L H WEIGHT H D L MODEL 6D inch mm inch mm inch mm inch mm Lbs kg. 0, 6 7, 8,0 0, 9,, ½ 6,0 76 8,6 8, 08,,7 80, 89, 08,9 8,6 00,,, 8,,6 6,

600 SERIES DIAPHRAGM SELECTING TABLE SIZE DIAPHRAGM PRESSURE RANGE inch mm Type No mwc psi ½ 0 Standard #0 6-00 8 - Low Pressure #0 0-00 - 0 80-0 - 80 Standard #0-60 6-0 High Pressure #07 0-0 - 60 Low Pressure #0 0-00 - ½ 6 Standard #0-60 6-0 High Pressure #07 0-0 - 60 Low Pressure # 6-00 9-80 Standard # - 60 7-0 High Pressure #7 0-0 - 60 Low Pressure # 6-00 9-00 Standard # - 60 7-0 High Pressure #7 0-0 - 60 Low Pressure # 6-00 9 - Standard # - 60 7-0 High Pressure #7 0-0 - 60 Low Pressure # 8-00 - 6 0 Standard # 0-60 - 0 High Pressure #7 0-0 - 60 Low Pressure # - 00 6-8 00 Standard # 0-60 - 0 High Pressure #7 0-0 - 60 Low Pressure # - 00 6-0 0 Standard # 7-60 0-0 High Pressure #7 0-0 - 60 Low Pressure # - 00 6-00 Standard # 0-60 - 0 High Pressure #7 0-0 - 60

600 SERIES HYDRAULIC PERFORMANCE Valve Size mm 0 0 6 80-0-80 80 00 0 00 0 00 inch ½ ½ 6 8 0 Kv m³/h @ bar 0 0 0 0 00 00 0 800 0 800 Cv gpm @ psi 60 60 60 0 0 9 0 080 Max. Flow Continuance Max. Flow Intermittent Vol. Control Chamber m³/h 9 9 9 00 6 6 0 6 97 00 gpm 0 7 7 7 8 68 68 79 79 66 m³/h 0 78 78 78 99 77 88 909 gpm 9 876 69 69 0 7 86 80 lt 0,07 0, 0, 0, 0,66 0,66 0,66,70,06 8, 0,6 Kv : Valve Flow Coefficient (fluid passing in bar pressure lose in m³/h and bar ) Cv : Valve Flow Coefficient (fluid passing in bar pressure lose in gpm and psi ) Q : Flow Rate (m³/h, gpm) ΔP : Head Loss (bar, psi) G : Specific weight of water (.0) 0 HEAD LOSS CHART Head Loss (mwc) ½" "-½"-""" " "-" 6" 8" 0" " DN0(½") DN0(") -DN6(½") - DN80-0-80(""") DN80(") DN00(") -DN(") DN0(6") DN00(8") DN0(0") DN00(") 0 00 000 Flow Rate (m³/h) CAVITATION CHART Upstream Pressure (bar) Cavitation Zone Noisy Operation Zone 0 Safety Zone 8 6 0 8 6 6 7 8 Downstream Pressure (bar)

600 SERIES MANUAL CONTROL VALVE 600 SERIES M Armaş M model valve is the hydraulic control valve operated by line pressure and designed to ensure opening/closing process by means of -way selector Minimum opening pressure of valve is 0.7 bar. Thanks to its flexible diaphragm, it makes easy and fast control process in high pressure applications and is closed as full tightness without causing surge. It may be used in different applications by adding different pilot valves on its main body. Ball Valve In-line Finger Filter - Way Selector Valve Plug Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate : m³/h Maximum network/line pressure Manual Control Valve Armaş Manual Control Valves can be used as on-off valve instead of mechanical valves at water network lines.

600 SERIES EL SOLENOID CONTROLLED VALVE Armaş EL model valve is the hydraulic control valve operated by line pressure and designed to ensure opening/closing process by means of built-in /-way solenoid pilot valves controlled remotely with electric signal. Electric signal for solenoid pilot valves is ensured by means of a control device, time relay, main switch and PLC control units etc. Opening/ Closing process may be realized easily thanks to manual control on solenoid pilot Depending on desire, V AC 0Hz/60Hz or V DC, 9V DCLATCH and V DC latch normally open (N.O.) or normally closed (N.C.) solenoid coils may be used on main Ball Valve In-line Finger Filter Solenoid Pilot Valve - Way Selector Valve Plug Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate : m³/h Maximum network/line pressure Electric voltage value to be used : volt Solenoid Control Valve Controller Armaş Solenoid Controlled Valves can be used with a local control unit or advanced automatin systems.

PRESSURE REDUCING VALVE 600 SERIES PR Armaş PR model pressure reducer control valve is the hydraulic control valve which reduces high upstream pressure value into desired lower pressure value by means of built-in pressure reducing pilot valves. Pressure reducer control valve controls downstream pressure value continuously and maintains it constant without being affected from flow rate and upstream pressure values. When no flow exists in the system, it is closer by itself automatically. When valve upstream pressure value decreases below adjusted downstream pressure value, it is opened fully by itself. Maximum flow rate : m³/h Maximum network/line pressure Maximum upstream pressure Minimum upstream pressure Desired downstream pressure Pressure Reducing Pilot Valve Ball Valves In-line Finger Filter Pressure Gauge Adjustment Bolt Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) -WAY PILOT OPERATING -way pilots are recommended to use at the application which has very close values between upstream and set pressure because of -way pilots provide less head loss. Pressure Reducing Valve Isolation Valve (Gate, Butterfly Valve etc.) Air Valve Isolation Valve (Gate, Butterfly Valve etc.) Isolation Valve (Gate, Butterfly Valve etc.) Quick Pressure Relief Valve Strainer Pressure Reducing Valve Isolation Valve (Gate, Butterfly Valve etc.) Armaş Pressure Reducing Valves reduce pressure to setted downstream pressure value without affecting upstream pressure value at pressure chambers and supplying lines. 6

600 SERIES PREL SOLENOID CONTROLLED PRESSURE REDUCING VALVE 6 Armaş PREL model pressure reducing valve is the hydraulic control valve which reduces high upstream pressure value into desired lower pressure value. Control of main valve is achieved by means of built-in / -way solenoid pilot valves. Electric signal for solenoid pilot valves is ensured by means of a control device, time relay, main switch and PLC control units etc. Automated control may be easily ensured by this way in application systems. Pressure Reducing Pilot Valve Solenoid Pilot Valve Ball Valves Pressure Gauge In-line Finger Filter 6 Adjustment Bolt Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate : m³/h Maximum network/line pressure Maximum upstream pressure Minimum upstream pressure Desired downstream pressure Electric voltage value to be used : volt Air Valve Watermeter Filter Solenoid Controlled Pressure Reducing Valve Controller Armaş Solenoid Controlled Pressure Reducing Valves can be used at advanced automation systems with its pressure reducing function. 7

PRESSURE SUSTAINING VALVE 600 SERIES PS Armaş PS model pressure sustaining hydraulic control valve maintains valve upstream pressure value constant. Valve is opened when line pressure reaches adjusted valve pressure level. It ensures that pump motor within pumping systems will start without load. It also prevents positive pressure waves caused by pump during start-up. Valve controls upstream pressure value continuously and keeps it in a constant value without being affected from changes in flow rates. When no flow exists, it is closed by itself as fully tightness. Pressure Sustaining Pilot Valve Ball Valves In-line Finger Filter Pressure Gauge Adjustment Bolt Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate Maximum network/line pressure : m³/h Valve connection type : -- Desired upstream pressure Isolation Valve (Gate, Butterfly Valve etc.) Air Valve Pump Pressure Sustaining Valve Armaş Pressure Sustaining Valves control upstream pressure to provide a good condition operating for pump systems. 8

600 SERIES DIF DIFFERENTIAL PRESSURE SUSTAINING VALVE Armaş DIF model Differential Pressure Sustaining Valve is the hydraulic control valve which maintains a preset pressure differential between its upstream and downstream sides. Required upstream pressure can be adjusted by the pilot easily. The valve can control heating and cooling systems, booster pump discharge, bypass lines, filters and other similar systems. - Way Selector Valve Ball Valves In-line Finger Filter Differential Pressure Sustaining Pilot Pressure Gauge Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate : m /h Maximum network/line pressure Maximum upstream pressure Minimum upstream pressure Desired pressure difference value Strainer Isolation Valve (Gate, Butterfly Valve etc.) Isolation Valve (Gate, Butterfly Valve etc.) Differential Pressure Sustaining Valve Differential Pressure Sustaining Valve Armaş Differential Pressure Sustaining Valves sustain pressure difference of two different points which is located in the system. 9

PRESSURE REDUCING and SUSTAINING VALVE 600 SERIES PRPS 6 Armaş PRPS model pressure reducing/sustaining hydraulic control valve reduces valve downstream pressure to desired value by sustaining upstream pressure. Two pilot valves exist on Pilot valve on upstream side is the pressure sustaining pilot valve and sustains upstream pressure. Other pilot valve is pressure reducing pilot valve and keeps downstream pressure constant by reducing it to desired value. It controls upstream and downstream pressure continuously and keeps them within constant values. Pressure Sustaining Pilot Valve Pressure Reducing Pilot Valve Ball Valves Pressure Gauges In-line Finger Filter 6 Adjustment Bolts Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate : m³/h Maximum network/line pressure Maximum upstream pressure Minimum upstream pressure Desired downstream pressure Desired upstream pressure Air Valve Strainer Pressure Reducing and Sustaining Valve Armaş Pressure Reducing and Sustaining Valves can be used for avoiding any interaction of high altitude and low altitude usage areas which is feeded by same line and for avoiding unnecessary line discharge. 0

600 SERIES FL FLOAT LEVEL CONTROL VALVE Armaş FL model float level control valve is the hydraulic control valve designed to control water level in reservoirs and tanks continuously. Main valve is controlled by -way modulating type float pilot valve manually. Main valve mounted on reservoir and tank upstream is closed as fully sealed without causing surge when water level reaches to maximum level. Valve opening/closing speed may be adjusted in set value. It may be used in the system by mounting horizontal or vertical positions. Needle Valve Ball Valves In-line Finger Filter Float Plug Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate Maximum network/line pressure : m³/h Modulating Type Float Level Control Valve Isolation Valve (Gate, Butterfly Valve etc.) Air Valve Isolation Valve (Gate, Butterfly Valve etc.) Air Valve Float Water Tank Modulating Type Float Level Control Valve Float Water Tank Armaş Float Level Control Valves prevent water tank overflow.

ELECTRIC FLOAT LEVEL CONTROL VALVE 600 SERIES FLEL Control Board 6 Armaş FLEL model electrical float level control valve is the hydraulic control valve designed to control water level continuously by means of electrical float placed in reservoirs and tanks. Electrical float sends signal to solenoid coil on main valve when water level decreases below set level. Main valve is opened and ensures that tank or reservoir will be filled permanently. When water reaches maximum level, electrical float sends signal to solenoid coil again and main valve is closed as full sealed. - Way Selector Valve Plug Ball Valve Solenoid Pilot Valve In-line Finger Filter 6 Electric Float Switch Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate Maximum network/line pressure : m³/h Electric voltage value to be used : volt Controller Air Valve Water Tank Isolation Valve (Gate, Butterfly Valve etc.) Electric Float Level Control Valve Isolation Valve (Gate, Butterfly Valve etc.) Armaş Electric Float Level Control Valves prevent water tank overflow thanks to electric float.

600 SERIES DIFL DIFFERENTIAL FLOAT LEVEL CONTROL VALVE Armaş DIFL model float control valve is the hydraulic control valve designed to control water level in reservoirs and tanks in desired ranges. Main valve is closed as wholly sealed without surge when water reach desired level thanks to / way differential control pilot. Max. and min. water level in reservoir may be adjusted to desired value in a wide range. Thanks to this feature, pump does not put into/out of service frequently during level control of reservoir fed by pump. Valve controls water level and keeps it in desired range without being affected from flow rate and pressure changes. - Way Selector Valve Ball Valves In-line Finger Filter Plug Differential Level Control Pilot Valve Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate : m /h Maximum network/line pressure Desired level control range : m Differential Float Assemble Air Valve Isolation Valve (Gate, Butterfly Valve etc.) Differential Float Level Control Valve Armaş Differential Float Level Control Valves control minimum and maximum water levels at water tanks thanks to its differential float.

FLOW RATE CONTROL VALVE 600 SERIES FR 6 Armaş FR modell flow rate control valve is designed to limit desired flow rate. The orifice on main valve upstream creates pressure difference and /way differential pressure set pilot mounted in control chamber of valve senses this pressure difference and ensures that main valve opens in desired flow rate. Valve thereby limits desired flow rate automatically and keeps it fixed. It eliminates over flow by preventing excessive flow during reverse washing in filtration systems. - Way Selector Valve Ball Valve In-line Finger Filter Plug Flow Rate Control Pilot Valve Orifice Plate Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) 6 Maximum flow rate Maximum network/line pressure : m³/h Maximum upstream pressure Desired flow rate : m³/h Isolation Valve (Gate, Butterfly Valve etc.) Hydraulic Signal Line Flow Rate Control Valve Armaş Flow Rate Control Valves limit the flow rate to requested value.

600 SERIES QR QUICK PRESSURE RELIEF VALVE Armaş QR model quick relief control valve is the safety control valve designed to protect system by releasing pressure surges to atmosphere quickly caused from sudden changes in water speed because pumps put into/out of service frequently in water network elevation lines. When network pressure goes beyond set point, valve opens by itself quickly and protects system by releasing over pressure. When line pressure decreases to normal level, it is closed slowly and automatically as wholly sealed without causing surge. Maximum flow rate : m³/h Maximum network/line pressure Maximum upstream pressure Desired upstream pressure D= Quick Pressure Relief Pilot Valve Ball Valves In-line Finger Filter Quick Pressure control valve is mounted on network in TE configuration. Since valve s function is to release pressure, valve diameter may be selected as equal to or in closest smaller size than main pipe diameter. Valve diameter should be selected as smaller than main pipe diameter. Following empirical formula may be used in determining diameter of quick pressure relief control Where; 0xQ Hm Pressure Gauge Adjustment Bolt D = Diameter of quick pressure relief control valve (mm) Q = System Flow Rate (m /h) Hm = System Operating Pressure (meter bar 0 meter) Valve closing time is proportional with pipe length. As system pipe length increases, valve closing time should be increased. Pump Quick Pressure Relief Valve Isolation Valve (Gate, Butterfly Valve etc.) Check Valve Armaş Quick Pressure Relief Valves protect pipe-line and system equipments during pressure fluctuations.

SURGE ANTICIPATING VALVE 600 SERIES SA 6 Armaş SA model surge anticipating control valve is the safety control valve designed to protect system in relatively longer water supply network elevating line by damping energy waves formed by energy interruptions in pumping systems and by releasing water-hammers which are caused from sudden changes in water flow rate to atmosphere automatically and quickly. Valve is opened quickly by sensing diminished pressure wave previously by means of pressure signal tube it owned. When line pressure reached normal level, it is closed slowly and automatically as wholly sealed. Maximum flow rate : m /h Maximum network/line pressure Maximum pump pressure Length of main pipe line : m Low Pressure Pilot Valve High Pressure Pilot Valve Ball Valves 6 In-line Finger Filter Pressure Gauge Needle Valve Surge Anticipating valve is mounted on network in TE configuration. Since valve s function is to release pressure, valve diameter may be selected as equal to or in closest smaller size than main pipe diameter. Valve diameter should be selected as smaller than main pipe diameter. Following empirical formula may be used in determining diameter of quick pressure relief control Where; D= 0xQ Hm D = Diameter of surge anticipating valve (mm) Q = System Flow Rate (m /h) Hm = System Operating Pressure (meter bar 0 meter) Valve closing time is proportional with pipe length. As system pipe length increases, valve closing time should be increased. Pump Pump Control Valve Surge Anticipating Valve Armaş Surge Anticipating Valves protect pipe-line against to impacts due to water hammer and unexpected pump shut-off. 6

600 SERIES HCV HYDRAULIC CHECK VALVE Armaş HCV model valve is hydraulically controlled check valve which operates with line pressure and prevents back-flow in system. When downstream pressure value exceeds upstream pressure value, valve is closed as wholly sealed without causing surge. When upstream pressure value exceeds downstream pressure value, check valve is opened by itself slowly. So it damps pressure surges formed during start-up. In-line Finger Filter Plug Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate : m /h Maximum network/line pressure Maximum upstream pressure Pump Air Valve Hydraulic Check Valve Armaş Hydraulic Check Valves prevent back-flow. 7

PUMP (BOOSTER) CONTROL VALVE 600 SERIES PC 6 6 Armaş PC model pump control valve is a control valve designed for putting booster type pumps into/out of service automatically which is used water network elevating lines. When start button is pressed, pump control valve is opened by itself slowly in comparison with booster pump until pump rotation will reach working rotation. When stop button is pressed, control valve is closed slowly without causing surge in the first plan. When pump control valve was closed as fully sealed, it is disengaged from system by means of Limit Switch on it. In situations like energy interruption, works as a check valve to prevent back-flow to pump and eliminates use of an extra check valve in the system. Solenoid Pilot Valve Limit Switch Assemble Ball Valves Needle Valve In-line Finger Filter 6 Check Valve Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate : m /h Maximum network/line pressure Pump Pump Control Valve Surge Anticipating Valve Armaş Pump Control Valves protect and control booster type pumps. 8

600 SERIES DPC DEEP WELL (SUBMERSIBLE) PUMP CONTROL VALVE 6 Armaş DPC model deep-well pump control valve is a relief control valve designed for putting deep-well type pumps into/out of service automatically. Valve is connected on main line with a TE piece. Valve is in open position before pump operates. When pump starts up, valve is closed by itself slowly without causing surge and increases system pressure gradually. Before pump stops, valve opens by itself slowly and automatically and decreases system pressure gradually. Maximum flow rate : m /h Maximum network/line pressure Maksimum pump pressure Depth of the well : m Solenoid Pilot Valve Ball Valve In-line Finger Filter 6 Limit Switch Assemble Needle Valve Plug Deep-well Pump control valve is mounted on network in TE configuration since it is a electric activated release Since valve s function is to release, valve diameter may be selected as equal to or in closest smaller size than main pipe diameter. Valve diameter should be selected as smaller than main pipe diameter. Following empirical formula may be used in determining diameter of deep-well pump control Where; D= 0xQ Hm D = Diameter of deep-well pump control valve (mm) Q = System Flow Rate (m /h) Hm = System Operating Pressure (meter bar 0 meter) Isolation Valve (Gate, Butterfly Valve etc.) Submersible Pump Check Valve Isolation Valve (Gate, Butterfly Valve etc.) Isolation Valve (Gate, Butterfly Valve etc.) Surge Anticipating Valve Deep Well (Submersible) Pump Control Valve Armaş Deep Well Pump Control Valves preventing surges caused by pump start-up or shut-off. 9

EXCESSIVE FLOW SHUT-OFF CONTROL VALVE 600 SERIES FE Armaş FE model excessice flow shut-off control valve is activated by the line pressure. The valve is a hydraulic control valve closes drip tight when flow rate exceeds the set value. The valve is fully open when flow rate is below the set rate. A differantial way pilot valve and orifis are on valve which immediately closes drip tihgt itself when flow rate exceeds the set value. This feature allows prevent waste water such as burst pipe damage. The valve is open manual after auto closing. It is set auto after the fully opening will be provided. Flow Rate Control Pilot Ball Valve - Way Selector Valve Orifice In-line Finger Filter Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate Maximum network/line pressure : m³/h Maximum upstream pressure Maximum Flow Rate for limiting : m³/h Isolation Valve (Gate, Butterfly Valve etc.) Hydraulic Signal Line Excessive Flow Shut-Off Control Valve Armaş Excessive Flow Shut-off Valves prevent flood damages caused by pipe burst. 0

600 SERIES RC REMOTE CONTROL VALVE Remote Control Armaş RC model remote control valves are activated by hydraulic or pneumatic pressure command with the relay valve on main The standard valve is normally closed The valve opens when the pressure signal received. Remote control valves are used in many automation systems. Accelerator Relay Ball Valve In-line Finger Filter Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate Maximum network/line pressure : m³/h Pressure Signal Unit Remote Control Valve Isolation Valve (Gate, Butterfly Valve etc.) Armaş Remote Control Valves are activated by a remote pressure signal.

PLC CONTROLLED VALVE 600 SERIES EC Armaş EC model PLC controlled valves are enabled local or remote control of various applications such as time related applications, different the batching operation of liquid, automatic control systems. The main valve is controlled by two solenoids that controlled by a PLC controller. The valve have simple and reliable design that works with low power Solenoid Pilot Valve Ball Valves In-line Finger Filter Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate Maximum network/line pressure : m³/h Valve connection type : Electric voltage value to be used : volt PLC Unit PLC Controlled Valve Isolation Valve (Gate, Butterfly Valve etc.) Armaş PLC Controlled Valves control pressure or flow rate according to reciving signals from PLC Control unit.

600 SERIES ALT ALTITUDE CONTROL VALVE Armaş ALT model is an automatic, high sensitive pilot controlled, level control valve, activated by the static pressure of the tank tower. The high sensitive pilot valve opens or close the main valve in response to the static pressure of water level in tank. The pilot valve located outside the tank tower. There is no need any floats. Altitude Pilot Ball Valve - Way Selector Valve Ball Valve In-line Finger Filters Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate Maximum network/line pressure : m³/h Maximum Water Tank Height : m Water Tank Altitude Control Valve Isolation Valve (Gate, Butterfly Valve etc.) Armaş Altitude Control Valves control the water volume without float in an elevated tank.

BI-LEVEL ALTITUDE PILOT CONTROLLED LEVEL CONTROL VALVE 600 SERIES ALT-B Armaş ALT-B model is an automatic, high sensitive double pilot controlled, level control valve, activated by the static pressure of the tank tower. The high sensitive pilot valves opens or close the main valve in response to the static pressure of water level in tank. The pilot valves located outside the tank tower. There is no need any floats. One of the pilot valve control the main valve according to minimum water level. The other one control the main valve according to maximum water level. Altitude Pilot Altitude Pilot - Way Selector Valve Ball Valves In-line Finger Filters Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate Maximum network/line pressure : m³/h Maximum Water Tank Height : m Minimum Water Tank Height : m Water Tank Isolation Valve (Gate, Butterfly Valve etc.) Bi-Level Altitude Pilot Controlled Level Control Valve Armaş Bi-Level Altitude Control Valves control the water volume without float in an elevated tank.

600 SERIES TSO TWO STAGE OPENING VALVE Armaş TSO model two stage opening valve is used all lines will be fast filled, it can be used to prevent damage caused by fast filling. Until the low pressure port of the pilot is completely filled, flow of valve is restricted and then allowed to fully opening. It can be used with other control valves for filling the system with high water speed. Multifunctional Pilot Ball Valve - Way Selector Valve In-line Finger Filter Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate Maximum network/line pressure : m³/h Two Stage Opening Valve Isolation Valve (Gate, Butterfly Valve etc.) Armaş Two Stage Open Hydraulic Control Valves prevent water-hammer/surges caused by fast drained pipe filling.

FLOW RATE CONTROL and PRESSURE REDUCING VALVE 600 SERIES FRPR 6 Armaş FRPR model flow rate control and pressure reducing valves, independently provides two functions. Flow control being provided with way differential pilot valve on the main valve which works line pressure without any energy, pressure reducing pilot valve control the downstream pressure of main Flow rate control and pressure reducing valves decrease the valve number on lines used flow and pressure control to economize. Flow Rate Control Pilot Pressure Reducing Pilot Ball Valves Orifice Pressure Gauge 6 In-line Finger Filter Valve size same as main line or one size smaller. Maximum flow speed for continuous operation. m/sec (8 ft/sec) Maximum flow rate : m³/h Maximum network/line pressure Maximum upstream pressure Desired flow rate Minimum upstream pressure Desired downstream pressure : m³/h Isolation Valve (Gate, Butterfly Valve etc.) Hydraulic Signal Line Flow Rate Control and Pressure Reducing Valve Armaş Pressure Reducing and Flow Rate Control Valve is a combined hydraulic control valves which controls pressure and flow rate parameters. 6

OTHER PRODUCTS HYDRAULIC CONTROL VALVES 800 SERIES Armaş 800 series automatic hydraulic control valves are designed in the Y body model type so as to show maximum resistance to cavitation under minimum head loss in high flow rates. Armaş 800 series automatic hydraulic control valves are double-chamber diaphragm actuated and disc closed type. Valve has a standard double control chamber. Available Sizes: (0 mm) - 6 (00 mm) Available Connection Types: Flanged 00 SERIES Armaş 00 series valves are direct diaphragm closing automatic hydraulic control valves which work with line pressure. They ensure easy and smooth flow with minimum pressure losses thanks to excellent design of valve body and diaphragm. Armaş 00 series hydraulic control valves are designed so that it can be used in potable water force network, agricultural irrigation, filtration, applications by even an unskilled personnel. Available Sizes: ½ (0 mm) - (80 mm) Available Connection Types: Threaded BACK FLUSHING VALVES Backflushing control valves are the -way control valves which are operated by line pressure or an external pneumatic pressure. Valve works in filtration and back flushing mode as coordinated with filter elements in the system. Available Sizes: (0 mm) - (00 mm) Available Connection Types: Threaded, Flanged, Grooved End AIR COMBINATION VALVES AAV SERIES Armaş AAV Series Automatic Air Release Valves are the valves that operate with line pressure. Armaş AAV Series Automatic Air Release Valves are the air valves that provide the venting of the air during filling and preventing of vacuum by taking air into the installation during emptying, releasing of the air that accumulates in the installation during active operation with the help of pressure and that operates in automatic manner. Available Sizes: (0 mm) - 8 (00 mm) Available Connection Types: Flanged 7

OTHER PRODUCTS MECHANICAL VALVES RESILIENT SEATED GATE VALVES Valve is closed or opened by moving wedge upward or downward via threaded stem mounted in the body. Wedge is rubber coated and It is not used as a check valve and flow rate adjustments. Available Sizes: (0 mm) - (00 mm) Available Connection Types: Flanged STRAINERS Strainer is the installation equipment which separates dirt, sediments and various foreign substances which may exist in the fluid (cold water, hot water, superheated water and steam) physically thanksto its filter and prevent them to damage other equipment in installation. Strainers are used to protect equipments such as pumps, water counters and automatic check valves form foreign matters by being mounted on intake side of this equipment. Available Sizes: (0 mm) - 6 (00 mm) Available Connection Types: Flanged CHECK VALVES Swing check valve permits that water passes toward flow direction and prevents water flow in counter direction. It is manufactured in such a way that it will be closed by its own weight or by a weight mechanism. It is used in especially pumping plants to prevent back flow in case pump becomes out of service. It may be used in hot and cold water plants and with each kind of acid free gases and liquids. Available Sizes: (0 mm) - 8 (00 mm) Available Connection Types: Flanged ALARM CHECK VALVES Armaş FCV Alarm Check Valve is designed for wet applications where the water has no the danger of frost. The pressurized water which is inside of the pipe-line is discharged by sprinklers because of fire situation. When the discharged pressurized water system is supporting continuously, retard chamber is being full. Then, the pressure switch on the retard chamber is actuated. The pressure switch sends alarm information to fire warning system or the automation system. After the pressure switch is actuated, the water is delivered to the gong and releases a mechanical alarm. Available Sizes: ½ (6 mm) - 8 (00 mm) Available Connection Types: Flanged OS&Y GATE VALVES OS&Y Valve is a type of gate valve which is able to follow the opening/closing position by moving the stem up&down movement, is able to follow electronically the movement by adding a monitoring key, and full open position does not disrupt the flow. OS&Y Valve generates low head loss according to butterfly valves. Valve is closed or opened by moving wedge upward or downward via threaded stem mounted in the body. Wedge is rubber coated and It is not used as a check valve and flow rate adjustments. Available Sizes: (0 mm) - 8 (00 mm) Available Connection Types: Flanged 8

SMART SOLUTIONS FOR WATER

. Organize Sanayi Bölgesi Atabey Sokak No:/A 00 Selçuklu / KONYA / TURKEY T: +90 7 (Pbx) F: +90 7 7 atlikarinca.net info@armas.com.tr v.0-/06