Check Valve AK Series RoS arge flow capacity ow cracking : 0.02 Pa A wide variation of models AK2000-01 AK2000-02 AK000-02 1 8 1 1 dm /(s bar). 9. Critical ratio Weight (g) 0 1 AK000-0 8 0.2 10 AK000-0 1 2 19 10 AK000-0 0 AK000-1 1 Proof aximum operating inimum operating Ambient and fluid temperature 1. Pa 1 Pa 0.02 Pa to 0 C (No freezing) Symbol AK 2 000 02 Standard size 2 1 1 2 1 ow to Order Nil N F 01 1 8 02 1 0 8 0 1 2 0 1 Thread type Rc NPT G Applicable series AK2000 AK2000, 000 AK000 AK000 AK000 AK000 Flow Rate Characteristics AK2000-01/02 Pressure drop (Pa) AK000-0/0 Pressure drop (Pa) Inlet : 0.1 Pa Inlet : 0.1 Pa Flow rate (/min (ANR)) Note) The flow rate characteristics are representative values. AK000-02 Pressure drop (Pa) Pressure drop (Pa) Inlet : 0.1 Pa AK000-0/ Flow rate (/min (ANR)) Inlet : 0.1 Pa Flow rate (/min (ANR)) Flow rate (/min (ANR)) 78
Check Valve AK Series Construction AK2000 AK000/000 No. Description aterial 1 2 Body Cover Aluminum die-casted Aluminum die-casted Note 1) Note 1) AK2000: Zinc alloy Replacement Parts No. Description aterial 7 Valve Spring O-ring Ring Seat ring Dimensions PO Stainless steel Brass, Part no. AK2000 AK000 AK000 190 1901 1902 1907 1901 1902 KA0029 20 x x 1. 1901 1901 1902 1902 1 B AK2000-01, 02 AK000-02, 0, 0 AK000-0,,,, /, 1 0 7 9 2 0 0 AS-F T ASD AS AS-FE KE AS-FG AS-FP AS-F AS-D AS-T ASP ASN AQ ASV AK VCC ASR ASQ Specific Product Precautions Be sure to read this before handling the products. Refer to back page 0 for Safety Instructions and pages to for Flow Control Equipment Precautions. Design/Selection Caution 1. Even when using with the specification range listed in the catalog, when the IN side of the check valve is throttled, it may fail to open all the way and may generate vibration. 2. The minimum operating is the when the valve begins to open, and not the when the valve is fully open.. The check valve has a construction, in which it is closed by the differential generated when the inlet (IN side) or outlet (OUT side) solenoid valve is switched. Be aware that the check valve does not close completely and the outlet (OUT side) may drop when the inlet (IN side) drops gently and the differential becomes smaller than the minimum operating or cracking. 78
Bushing Type Check Valve with One-touch Fittings AK/AKB Series RoS AS-F T configurations provide design solutions based on the operating conditions. ASD AS AS-FE KE AS-FG AS-FP AS-F AS-D AS-T Bushing type Can be used in applications with splashing coolant and spatter, etc. ASP ASN ale connector type Can be used directly on equipment. AQ ASV Straight type Easily installed in pipe lines. AK VCC ASR ASQ Can be used for vacuum ( 0 kpa) Symbol IN OUT Free flow direction Check direction Compact & lightweight Outside diameter: ø11. mm Overall length: 7.1 mm Weight: g (for AK0-00) Valve ow cracking : 0.00 Pa With One-touch fitting Reduces piping labor Release bushing color etric size: White Inch size: Orange 787
Bushing Type Check Valve with One-touch Fittings AK/AKB Series RoS Straight type ale connector type AK 0 00 AK 0 A ow to Order 01 S O.D. etric size Inch size 0 0 08 12 ø ø ø8 ø ø12 0 07 09 11 1 ø/2 ø ø/1 ø ø Check valve free flow direction A B From male to One-touch fitting From One-touch fitting to male Thread type Nil N AK0 AK0 AK08 AK AK12 With seal (Standard) and -2 UNF types are not required. etric () Unified (-2 UNF) R NPT ø ø ø8 ø ø12 x 0.8 U/2-2 UNF 01 02 0 0 Applicable Tubing O.D./Port Size Combinations etric size Inch size R O.D. O.D. AK0 AK07 AK09 AK11 AK1 ø/2 ø ø/1 ø ø -2 UNF NPT Bushing type AKB 01 A 01 S Body size 01 02 0 0 With seal (Standard) Thread type 01 02 Nil N R NPT 0 0 Check valve free flow direction A B From male to female From female to male Female/ale Threads Combinations R NPT AKB01 AKB02 AKB0 AKB0 Female Rc ale R AKB01 AKB02 AKB0 AKB0 Female NPT ale NPT 788
Bushing Type Check Valve with One-touch Fittings AK/AKB Series Drop prevention Proof Operating range Cracking Ambient temperature and operating fluid temperature material Note 2) 1. Pa 0 kpa to 1 Pa 0.00 Pa Note 1) to 0 C (No freezing) Nylon, Soft nylon, Polyurethane Note 1) The valve does not open fully at this level. Note 2) Use caution regarding the max. operating when soft nylon or polyurethane tubing is used. (Refer to pages and for details.) Application Example for Bushing Type Check Valve with One-touch Fittings Prevention of reverse flow to vacuum source (Simple vacuum holding) Tank reverse flow prevention AS-F T ASD AS AS-FE KE AS-FG AS-FP AS-F AS-D AS-T ASP ASN AQ ASV AK VCC ASR ASQ Specific Product Precautions Be sure to read this before handling the products. Refer to back page 0 for Safety Instructions and pages to for Flow Control Equipment Precautions. A certain amount of leakage is allowed in the specifications of this product. Please note that it is not suitable for holding over an extended period of time. Design/Selection Caution 1. Even when using with the specification range listed in the catalog, when the IN side of the check valve is throttled, it may fail to open all the way and may generate vibration. 2. The cracking is the when the valve begins to open, and not the when the valve is fully open.. The check valve has a construction, in which it is closed by the differential generated when the inlet (IN side) or outlet (OUT side) solenoid valve is switched. Be aware that the check valve does not close completely and the outlet (OUT side) may drop when the inlet (IN side) drops gently and the differential becomes smaller than the minimum operating or cracking. 789
AK/AKB Series Dimensions Straight type: AK 2 x etric Size O.D. 8 12 AK0-00 AK0-00 AK08-00 AK-00 AK12-00 ød 9. 11. 1.2 18. 21.7. 7.1.. 70.2 12.7 1. 18. 21 dm /(s bar) 0..8.8 Critical ratio 0. 0. Weight (g) 2 ød Inch Size O.D. /2 /1 AK0-00 AK07-00 AK09-00 AK11-00 AK1-00 ød 9. 12 1.2 18. 21.7. 9.. 70.2 12.7 1. 18. 21 dm /(s bar) 0..8.8 Critical ratio 0. 0. Weight (g) 2 ale connector type: AK A A <For, UNF-2> <For R, NPT> Connection Connection etric Size O.D. 8 12 Inch Size O.D. /2 /1 Connection R x 0.8 x 0.8 Connection NPT -2 UNF -2 UNF AK0 - AK0-01S AK0 - AK0-01S AK0-02S AK08-01S AK08-02S AK08-0S AK -02S AK -0S AK -0S AK12-0S AK12-0S AK0 -U/2 AK0 -N01S AK07 -U/2 AK07 -N01S AK07 -N02S AK09 -N01S AK09 -N02S AK09 -N0S AK11 -N02S AK11 -N0S AK11 -N0S AK1 -N0S AK1 -N0S (exagon width across flats) 8 1 1 19 A Critical dm /(s bar) ratio 12.7 0. 0. 1. 0. 18. Weight (g) 2. 2. 21.2 20..2 2.9.9 8 0 1.7 2 27.7 1 2 2.. 7. 9. 8. 0.8 21.8 0. 9 80 0. 2.8.. 80 Reference dimensions of R after installation. (exagon width A Critical Weight across flats) dm /(s bar) ratio (g) 8 2. 21.2 12.7 0. 11.11 2. 20..7 0. 11.11 1. 0. 2.9.9 11 1.29 1 2 18 1.7 27.7 1 1.29 18. 2 2...2 8. 7. 7.2 0.7 21.8 0. 0.2 9.2 1.2 79 0. 87.2.8.. 8 Reference dimensions of NPT after installation. Bushing type: AKB Connection size 790 A Connection size etric Size Connection size R a b Inch Size Connection size NPT a b AKB01-01S AKB02-02S AKB0-0S AKB0-0S AKB01 -N01S AKB02 -N02S AKB0 -N0S AKB0 -N0S 1 2 A Weight (g) 2.7 9.8.2.2 19.7.8 8.7 8.2.8.8 0. 0. 18 8 11 Reference dimensions of R after installation. A dm /(s bar) Critical ratio Critical dm /(s bar) ratio Weight (g) 1.29..2 1 2.2 0.9. 20.2 8. 7..8.8 0. 0. 18 8 11 Reference dimensions of NPT after installation.
Bushing Type Check Valve with One-touch Fittings AK/AKB Series Construction Straight type: AK ø, ø ø/2, ø ale connector type: AK Free flow One-touch fitting ale Free flow One-touch fitting ale No. 1 2 7 8 9 type U/2 ø8, ø, ø12 ø/1, ø, ø ø, ø ø8 x R ø/2, ø ø/1 x NPT ø8, ø, ø12 ø/1, ø, ø Description aterial Note Body Brass Electroless nickel plated Valve, Aluminum alloy Spring Stainless steel Spacer Brass Electroless nickel plated Stopper Stainless steel O-ring Cassette Seal Gasket Stainless steel + No. 1 2 Description aterial Note Body PBT Valve, Aluminum alloy Spring Stainless steel Spacer Brass Electroless nickel plated Cassette Seal Bushing type: AKB Free flow Female ale Free flow Female ale No. 1 2 R NPT R,, NPT,, Description aterial Note Body Brass Electroless nickel plated Valve, Aluminum alloy Spring Stainless steel Spacer Brass Electroless nickel plated Stopper Stainless steel O-ring AS-F T ASD AS AS-FE KE AS-FG AS-FP AS-F AS-D AS-T ASP ASN AQ ASV AK VCC ASR ASQ 791
Check Valves For /Water ade to Order Please contact SC for detailed dimensions, specifications and lead times. ade to Order Body material: Brass/Stainless steel (ain parts: Stainless steel) ow cracking : Pa igh temperature: 80 C ow temperature: 0 C Rubber material: /FK/CR INA-1- /s INA-1-290 INA-1-7- INA-1-8- XTO-7- XTO-7- A XTO-7- E XTO-7- XTO-7- XTO-7- AE XTO-7- A XTO-7- A XTO-7- E XTO-7- E XTO-7- AE XTO-7- AE 01: Rc 02: Rc 0: Rc 0: Rc Body Brass All stainless steel ow cracking Pa ain parts: Stainless steel XTO-7- Rubber material FK FK CR FK CR FK CR FK CR /Water /Water /Water /Water /Water /Water /Water Operating inimum temperature operating range ( C) (Pa) to 0 to 0 to 80 to 0 to 0 to 0 to 80 0 to 0 to 0 to 80 0 to 0 to 80 0 to 0 to 80 0 to 0 0.02 INA-1-290 Application Anti-corrosion Anti-corrosion Basic type For water For vacuum, oscillation measures For high temperature For low temperature 792
ade to Order INA-1- INA-1-290 (Body material: Brass) Proof Operating range Ambient and fluid temperature Critical ratio ow to Order INA 1 290 Operating range Proof Ambient and fluid temperature Valve seal material Sonic conductance Rc Rc, Rc Critical ratio /Water 1. Pa 0.02 to 1 Pa to 0 C (No freezing) 2 x Rc 1.2 dm / (s bar) 0. INA-1- (All stainless steel) INA-1-7 INA-1-8 /Water to 1 Pa 1. Pa to 0 C (No freezing) to 80 C (No freezing) FK Rc, Rc, Rc 9. dm /(s bar). dm /(s bar) 0. Construction/Dimensions q e r w t 2 x Rc 12 0 Symbol Weight: 20 g No. Description aterial Note 1 Body Brass Electroless nickel plating 2 Guide Brass Electroless nickel plating Valve Stainless steel 0, Spring Basic internal retaining ring Construction/Dimensions q t e r w ø2 2 x D 28 Symbol AS-F T ASD AS AS-FE KE AS-FG AS-FP AS-F AS-D AS-T ASP ASN AQ ASV AK VCC ASR ASQ ow to Order INA 1 7 02 7 8 Series Seal material: Seal material: FK 02 Rc 0 Rc 0 Rc INA-1-7-02 INA-1-7-0 INA-1-7-0 Part no. INA-1-8-02 INA-1-8-0 INA-1-8-0 No. Description 1 Body A 2 Body B Check valve spring Stopper INA-1-7 type Valve INA-1-8 type D Rc Rc Rc Weight (g) 20 20 2 aterial Stainless steel 0 Stainless steel 0 Stainless steel 0, Stainless steel 0, FK 79
XTO-7- XTO-7- (Body material: Brass) Proof Operating range Ambient and fluid temperature Rc, Rc, Rc Rc 9. dm/ (s bar) Rc, Rc. dm/ (s bar) Critical ratio 0. Note) Refer to /s on page 790 for combinations of each option. ow to Order XTO 7 02 XTO-7- XTO-7- A XTO-7- E XTO-7- XTO-7- /Water 1. Pa to 1 Pa to 1 Pa to 1 Pa to 0 C (No freezing) to 80 C 0 to 0 C (No freezing) (No freezing) 02 0 0 Rc Rc Rc Option Symbol Operating temperature range inimum operating Nil Basic type to 0 C Pa A ain parts: Stainless steel (For water) to 0 C Pa E ow cracking to 0 C Pa igh temperature to 80 C Pa ow temperature 0 to 0 C Pa Note 1) A combination of and is not possible. Note 2) Refer to /s on page 790 for combinations of each option. Construction/Dimensions q t e r w Symbol ø2 2 x D 28 Part no. XTO-7-02 XTO-7-0 XTO-7-0 D Rc Rc Rc Weight (g) 280 2 No. Description Option symbol 1 Body A 2 Body B Check valve spring Stopper Bracket Valve Rubber lining Basic type Steel aterial A E AE A A E E AE AE Brass Brass Steel Steel Stainless steel 0 Stainless steel 0 Stainless steel 0 FK CR FK CR FK CR FK CR 79