panels and components

panels and components Divide 357 e0+ 322 GPS II 369

E EO+ eo+ is an innovative modular panel and desking system that works for you in a variety of ways. Create workstations, conference rooms and teaming areas with components that are easy to mix, match and reconfigure. Panels can be freestanding or used with coordinating desking and storage components to provide varying degrees of privacy. Styles include full privacy, partial whiteboard, partially glazed and fully glazed. Worksurfaces provide ergonomic access to computers and provide generous space for a multitude of daily tasks. Off-desk accessories can be quickly and easily repositioned along the optional panel mounted rail. Electrical components are necessary for everyday use and include electrical and data receptacles that can be worksurface mounted. eo+ is easy to use and move; its lightweight components fit together with convenience and ease. The eo+ system of office furniture adapts as fast as your needs change. Features and Benefits Partially and fully glazed panels are available in Clear, Smoked and Frosted options. Partial whiteboard panels are available on one or two sides. Primary worksurfaces are 18, or 30 deep, the optimum reach of an individual. 2mm matching edge on all worksurfaces. Worksurface scoops keep wires neat and out of the way. Adapt power/data module provides worksurface access to two electrical outlets and two plugs with adapters. eo+ s pedestals can be worksurface-supporting or freestanding. Box drawers have one pencil tray and one plate divider. All drawers have steel ball bearing suspensions and lock. Overhead storage and personal towers add additional storage possibilities. Panel frames, legs and pedestals are available in Black and Tungsten 2. Accessories can attach to worksurfaces or panels using an accessory rail. Accessories available in Black and Frosted on most models. Partially glazed panels provide privacy and additional light. Electrical and data receptacles can be worksurface mounted. Worksurface scoops provide wire management. 322 globalfurnituregroup.com

EO+ - NOTES E GENERAL INFORMATION Innovative modular panel and desking system. Versatile design with economic and ergonomic advantages. Perfect for workstations, conference rooms and teaming areas. Simple, modular, mix-and-match components that are easy to specify and assemble. Worksurfaces are supported by steel pedestals, worksurface/panel supporting hardware and end panels. eo+ s load bearing panel frames accept 29 H worksurfaces. Off-desk accessory bars are at 36-40 H and open shelves at 50 H. The top of the overhead storage cabinet can only be used on the 66 H panel when the top of it is even with the top of the 66 H panel. Islands and spanner islands are supported with square or tapered steel legs in conjunction with the above. Panels offer different degrees of privacy in a variety of styles. The entire eo+ panel is recyclable at the end of its life. All brackets and metal storage components consist of up to 30% recycled steel that can again be recycled. Durable epoxy powder coating used on all metal components contains no harmful VOC s or lead. Global laminate and seating products are in compliance with stringent emission guidelines set out by the GREENGUARD Environmental Institute under the standards for low emitting products and materials. www.greenguard.org. Level 3 Certified. PRIVACY PANEL CONSTRUCTION Tackable substrate honeycomb core covered in fabric. Panels are constructed of lightweight aluminum with a self leveling feature to maintain even height of all panels and permit fast installation and reconfiguration. Honeycomb panel cores are made from 30% recycled card stock. Slotted verticals provide load bearing capabilities. Each panel comes with 2.5 glides allowing for 2 height adjustment and two full length capture strips. Patented knuckle-loc design ensures solid panel-to-panel connection. Universal corner post (two-way, three-way, four way). RULE #1 Panels supporting overhead storage units and/or worksurfaces must be vertically stabilized. These panels must have worksurfaces attached to the panels using any combination of the following: A - Mid-support gables (EMSG2xxP) B - End gables (EFG2xxP) C - Worksurface supporting pedestals with pedestal connecting brackets (GWPSxxxxF/EPTPBK) D - Wing panels that are the same width as the depth of the worksurface and incorporate a set of corner brackets (EEWSB) PANEL FABRICS Available in the following panel fabrics: - Grade 2 Lola - Grade 3 Anchorage, Brinx, Mariposa - Grade 4 Accent - Grade 5 Meander, Tracery, Universe A A D A The same fabric MUST BE used on both sides of the panel. C B C PANEL FRAMES eo+ extruded aluminum panel frames are made from remelt billets (recycled aluminum) whenever possible and can be recycled almost endlessly. eo+ s load bearing frames accept 29 H worksurfaces. Off-desk accessory bars are at 36-40 H and open shelves at 50 H. The top of the overhead storage cabinet can only be used on the 66 H panel when the top of it is even with the top of the 66 H panel. RULE #2 Panels supporting overhead storage units must have panels of equal height on either side. IMPORTANT: When specifying and installing eo+ workstations with overhead storage units (shelves and overheads) and/or worksurfaces, the following rules must be followed. Failure to adhere to these rules may compromise the integrity of the installation and void the warranty. globalfurnituregroup.com 323

E EO+ - NOTES RULE #3 The width of an overhead storage unit must correspond with the width of the supporting panel. RULE #4 Wherever possible balance the layout by using the same size and type of overhead storage unit on both sides of the same panel. This type of layout will ensure straight panel runs. GLAZED PANELS Allows additional light into a workstation while creating a more open office space. Partially glazed panels start at 31 from the floor. Partially glazed panels may also start at 42 from the floor as a no charge option by adding PG42 after the model # (ex: EPPG2466-PG42) Fully and partially glazed panels are available in the following finishes: - Specify CPG for Clear plexiglass panels - Specify SPG for Smoked plexiglass panels - Specify FPG for Frosted plexiglass panels PARTIAL WHITEBOARD PANELS Panels may be ordered with whiteboards in the upper portion of the panel on either one side or both sides. TO ORDER PARTIAL WHITEBOARD PANEL ON ONE SIDE: First specify the panel side which faces you INNER SIDE and then OUTER SIDE of the panel. Example: EPP3666 WB F F EPP3666/WB/BX01/BX02 TO ORDER PARTIAL WHITEBOARD PANEL ON TWO SIDES: First specify the panel side which faces you INNER SIDE and then OUTER SIDE of the panel. Example: EPP3666 RULE #5 48 and 60 wide overhead storage units require corner posts and wing panels on both sides of the supporting panel. RULE #6 A run of panels without worksurfaces should be no longer than 9-0 and must be supported with (A) wing panels at both ends, (B) a wing panel at one end and a selfsupporting foot (EESF-1) at the other end or (C) a wing panel at one end and a floor mount (EEFM) at the other end - not shown. Note: Floor mounts MUST BE bolted to the floor. WB F EPP3666/WB/BX01/WB/BX02 WB F PANEL GROMMETS 3 diameter panel grommets allow wires and cables to pass through eo+ panels. Add $69. MUST SPECIFY POSITION: EEPG300-1: 34 above panel bottom and 4 in from the right panel edge (above worksurface) EEPG300-2: 26 above panel bottom and 4 in from the right panel edge (beneath worksurface) EEPG300-3: 8 above panel bottom and 4 in from the right panel edge EEPG300-4: 34 above panel bottom and 4 in from the left panel edge (above worksurface) EEPG300-5: 26 above panel bottom and 4 in from the left panel edge (beneath worksurface) EEPG300-6: 8 above panel bottom and 4 in from the left panel edge Note: Panel grommets NOT available on fully glazed panels or in the EEPG300-1 and EEPG300-4 position on partially glazed panels. When ordering grommets in partial whiteboard panels, orient the panel as shown above. Panel grommet finish - Black (BLK) or Tungsten 2 (TU2) will coordinate with panel finish. 34" EPG300-4 34" EPG300-1 PANEL FINISHES Lightweight, aluminum box frame finished with Black (BLK) and Tungsten 2 (TU2) durable epoxy powder coating. 26" EPG300-5 8" EPG300-6 worksurface 26" EPG300-2 8" EPG300-3 3" 324 globalfurnituregroup.com

EO+ - NOTES E SPECIAL SIZE PANELS Custom heights and widths are available for all panels. For custom size pricing use the next size up plus 10%. Panel heights CANNOT exceed 66. Panel widths CANNOT exceed 60. WALL ACCESS PANEL 18 opening in the base of the panel (from 2 above the floor to 20 ) to allow easy access to electrical and data wall outlets. Specify WAP after the panel model # (ex: EEP3666-WAP). Note: This option can also be specified for improved air flow. Add $114 to the fabric panel list price. Wall access panels are NOT available on fully glazed panels. Wall access panels ARE available on partially glazed panels and partial whiteboard panels. TRANSACTION TOPS AND WORKSURFACES 1 thick thermally fused laminate tops, 45 lb. density particle board core sealed with Global s preferred edging in matching color. PANEL SHIPPING Shipped 1 per carton unless otherwise noted. CUBIC FEET stated reflects TOTAL cubic footage. WEIGHT stated reflects the weight of ONE PANEL. LAMINATE FINISHES Worksurfaces will have a matching 2mm PVC edge ACJ* Absolute Acajou ASN* Asian Night AWC* Avant Cherry AWH* Avant Honey BLK Black BRC Brushed Cobalt CMB* Clear Maple CSJ Constellation Java DES* Dark Espresso DWT Designer White GRY Grey HGT Hayden Grey QTM* Quartered Mahogany SKC* Shaker Cherry SOG Storm Grey TFW* Tiger Fruitwood TMP* Tiger Maple TWL* Tiger Walnut WHE* Walnut Heights WHC* White Chocolate (textured) WGY Willow Grey WCR* Winter Cherry Note: * 25% upcharge for WOODGRAIN FINISHES on the following corner worksurfaces due to diagonal grain: 90 corner worksurface 90 corner worksurface - keyboard Corner curved worksurface with keyboard support L transaction tops Non-symmetrical 90 corner worksurface Non-symmetrical 90 corner worksurface - keyboard METAL COMPONENTS Panel frame: Black BLK Tungsten 2 TU2 90 corner posts: Black BLK Tungsten 2 TU2 Conduit corner post: Black BLK Tungsten 2 TU2 Panel to wall connectors: Black BLK Tungsten 2 TU2 Shelves: Black BLK Tungsten 2 TU2 Overhead storage units: Black BLK Tungsten 2 TU2 Pedestals Black BLK Tungsten 2 TU2 Legs: Black BLK Tungsten 2 TU2 Transaction top connectors: Black BLK Tungsten 2 TU2 HARDWARE & ACCESSORIES Wire troughs: Black BLK Pencil drawer: Black BLK Casters: Black BLK Off-desk accessories: Black BLK Frosted FR Power bar: Black BLK Vertical wire manager: Black BLK Tungsten 2 TU2 E series pull handles: Black BLK Panel grommets: Black BLK Grey GRY Flush plates: Black BLK Kick plate: Black BLK Tungsten 2 TU2 Brackets and connectors: Black BLK Tungsten 2 TU2 SPECIFICATIONS Specifications marked with an * are applicable to only those products which have the * symbol beside the product name. globalfurnituregroup.com 325

E EO+ PRIVACY PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. GR. 2 GR. 3 GR. 4 GR. 5 EEP1830 18 x 1.6 x 30 5 1 $126 $137 $150 $180 EEP1842 18 x 1.6 x 42 6.9 1 $193 $205 $227 $272 EEP1854 18 x 1.6 x 54 8.3 1.3 $199 $215 $234 $280 EEP1866 18 x 1.6 x 66 9.64 1.6 $245 $264 $291 $348 EEP2430 24 x 1.6 x 30 5.6 1 $167 $180 $199 $238 EEP2442 24 x 1.6 x 42 7.8 1.2 $196 $209 $231 $277 EEP2454 24 x 1.6 x 54 9.3 1.6 $219 $234 $258 $309 EEP2466 24 x 1.6 x 66 10.9 1.9 $266 $286 $315 $378 EEP3030 30 x 1.6 x 30 6.3 1 $207 $224 $245 $294 EEP3042 30 x 1.6 x 42 8.6 1.5 $205 $221 $243 $292 EEP3054 30 x 1.6 x 54 10.3 2.1 $247 $266 $293 $351 EEP3066 30 x 1.6 x 66 11.9 2.4 $276 $298 $328 $392 EEP3642 36 x 1.6 x 42 9.6 1.8 $249 $269 $295 $355 EEP3654 36 x 1.6 x 54 11.8 2.3 $279 $301 $332 $397 EEP3666 36 x 1.6 x 66 13.4 2.8 $348 $376 $413 $496 EEP4242 42 x 1.6 x 42 10.8 2.1 $272 $293 $321 $386 EEP4254 42 x 1.6 x 54 12.8 2.7 $303 $326 $359 $431 EEP4266 42 x 1.6 x 66 14.9 3.3 $375 $402 $443 $532 EEP4842 48 x 1.6 x 42 11.6 2.4 $280 $302 $333 $398 EEP4854 48 x 1.6 x 54 13.8 3.1 $328 $352 $387 $465 EEP4866 48 x 1.6 x 66 15.9 3.3 $387 $416 $457 $549 EEP5442 54 x 1.6 x 42 12.2 2.8 $292 $314 $345 $414 EEP5454 54 x 1.6 x 54 14.5 3.5 $357 $384 $422 $506 EEP5466 54 x 1.6 x 66 16.9 4.2 $402 $432 $475 $570 EEP6042 60 x 1.6 x 42 13.5 3 $300 $321 $355 $425 EEP6054 60 x 1.6 x 54 16.1 3.8 $387 $416 $457 $549 EEP6066 60 x 1.6 x 66 18.7 4.7 $419 $450 $496 $593 Privacy Panel Lightweight aluminum box frame construction creates superior panel rigidity. Tackable substrate honeycomb core is covered with fabric. 2.5 glide allows for 2 height adjustment. Panels are of actual size, eliminating creepage. Patented knuckle-loc design provides solid panel-to-panel connection. No connecting posts needed for straight runs. Self leveling feature maintains even height of all panels and permits fast installation and reconfiguration. Includes two capture strip screen connectors. Accepts suspended shelves and accessory bar. Must specify Black (BLK) epoxy or Tungsten 2 (TU2) frame finish. Custom sizes are available for eo+ series panels. Next size up add 10%. Frame finish Fabric 326 globalfurnituregroup.com

EO+ E PARTIAL WHITEBOARD PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. GR. 2 GR. 3 GR. 4 GR. 5 EPP1842 18 x 1.6 x 42 7.9 1 $288 $311 $342 $411 EPP1854 18 x 1.6 x 54 9.3 1.3 $299 $320 $354 $424 EPP1866 18 x 1.6 x 66 10.6 1.6 $368 $396 $435 $524 EPP2442 24 x 1.6 x 42 8.8 1.2 $295 $317 $348 $419 EPP2454 24 x 1.6 x 54 10.3 1.6 $328 $352 $387 $465 EPP2466 24 x 1.6 x 66 11.9 1.9 $398 $428 $472 $566 EPP3042 30 x 1.6 x 42 9.6 1.5 $308 $332 $364 $437 EPP3054 30 x 1.6 x 54 11.3 2.1 $371 $398 $437 $526 EPP3066 30 x 1.6 x 66 12.9 2.4 $416 $448 $493 $591 EPP3642 36 x 1.6 x 42 10.6 1.8 $376 $403 $444 $533 EPP3654 36 x 1.6 x 54 12.8 2.3 $421 $452 $498 $596 EPP3666 36 x 1.6 x 66 14.4 2.8 $521 $561 $617 $740 EPP4242 42 x 1.6 x 42 11.8 2.1 $409 $439 $482 $581 EPP4254 42 x 1.6 x 54 13.8 2.7 $455 $490 $538 $647 EPP4266 42 x 1.6 x 66 15.9 3.3 $563 $604 $663 $797 EPP4842 48 x 1.6 x 42 11.6 2.4 $423 $454 $500 $599 EPP4854 48 x 1.6 x 54 14.8 3.1 $491 $528 $581 $697 EPP4866 48 x 1.6 x 66 15.94 3.3 $581 $623 $685 $822 EPP5442 54 x 1.6 x 42 12.55 2.8 $435 $469 $514 $618 EPP5454 54 x 1.6 x 54 15.4 3.5 $536 $576 $633 $762 EPP5466 54 x 1.6 x 66 17.3 4.2 $604 $650 $714 $857 EPP6042 60 x 1.6 x 42 13.5 3 $450 $482 $533 $640 EPP6054 60 x 1.6 x 54 16.07 3.8 $581 $623 $685 $822 EPP6066 60 x 1.6 x 66 18.74 4.7 $627 $675 $742 $892 Partial Whiteboard Panel - One Side Partial whiteboard panels available for 42, 54 and 66 H eo+ panels. Features a whiteboard 31 above the floor on ONE SIDE. Full fabric on the opposite side. Aluminum box frame construction with fabric covered tackable substrate. 2.5 glide allows for 2 height adjustment. Includes two capture strip panel connectors. Must specify Black (BLK) epoxy or Tungsten 2 (TU2) frame finish. Custom sizes are available for eo+ series panels. Next size up add 10%. 54 and 66 H panels ONLY: Optional partial whiteboard starting at 42 above the panel bottom is available at no charge (both sides MUST BE the same height). Specify (PG42) to panel code (ex: EPP3666-PG42). Frame finish Fabric Optional specifications Panel grommet Wall access globalfurnituregroup.com 327

E EO+ PARTIAL WHITEBOARD PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. GR. 2 GR. 3 GR. 4 GR. 5 EPPP1842 18 x 1.6 x 42 8.9 1 $336 $361 $397 $476 EPPP1854 18 x 1.6 x 54 10.3 1.3 $348 $376 $413 $496 EPPP1866 18 x 1.6 x 66 11.6 1.6 $430 $463 $509 $612 EPPP2442 24 x 1.6 x 42 9.8 1.2 $343 $368 $405 $487 EPPP2454 24 x 1.6 x 54 11.3 1.6 $383 $412 $452 $542 EPPP2466 24 x 1.6 x 66 12.9 1.9 $465 $500 $549 $659 EPPP3042 30 x 1.6 x 42 10.6 1.5 $359 $386 $424 $509 EPPP3054 30 x 1.6 x 54 12.3 2.1 $433 $466 $512 $615 EPPP3066 30 x 1.6 x 66 13.9 2.4 $485 $520 $572 $688 EPPP3642 36 x 1.6 x 42 11.6 1.8 $436 $470 $515 $619 EPPP3654 36 x 1.6 x 54 13.8 2.3 $491 $528 $581 $697 EPPP3666 36 x 1.6 x 66 15.4 2.8 $611 $655 $720 $864 EPPP4242 42 x 1.6 x 42 12.8 2.1 $476 $512 $564 $676 EPPP4254 42 x 1.6 x 54 14.8 2.7 $533 $571 $628 $753 EPPP4266 42 x 1.6 x 66 16.9 3.3 $656 $705 $775 $932 EPPP4842 48 x 1.6 x 42 13.6 2.4 $493 $531 $584 $700 EPPP4854 48 x 1.6 x 54 15.8 3.1 $572 $616 $677 $814 EPPP4866 48 x 1.6 x 66 17.9 3.3 $676 $728 $801 $962 EPPP5442 54 x 1.6 x 42 14.5 2.8 $509 $546 $602 $723 EPPP5454 54 x 1.6 x 54 17 3.5 $625 $672 $739 $886 EPPP5466 54 x 1.6 x 66 19.3 4.2 $704 $758 $831 $998 EPPP6042 60 x 1.6 x 42 15.5 3 $525 $564 $621 $744 EPPP6054 60 x 1.6 x 54 18.1 3.8 $676 $728 $801 $962 EPPP6066 60 x 1.6 x 66 20.7 4.7 $732 $787 $865 $1039 Partial Whiteboard Panel - Two Sides Partial whiteboard panels available for 42, 54 and 66 H eo+ panels. Features a whiteboard 31 above the floor on BOTH SIDES. Aluminum box frame construction with fabric covered tackable substrate. 2.5 glide allows for 2 height adjustment. Includes two capture strip panel connectors. Must specify Black (BLK) epoxy or Tungsten 2 (TU2) frame finish. Custom sizes are available for eo+ series panels. Next size up add 10%. 54 and 66 H panels only: Optional partial whiteboard starting at 42 above the panel bottom is available at no charge (both sides MUST BE the same height). Specify (PG42) to panel code (ex: EPPP3666-PG42). Frame finish Fabric Optional specifications Panel grommet Wall access 328 globalfurnituregroup.com

EO+ E FULL WHITEBOARD & FABRIC PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. GR. 2 GR. 3 GR. 4 GR. 5 EFPP1842 18 x 1.6 x 42 6.9 1 $336 $361 $397 $476 EFPP1854 18 x 1.6 x 54 8.3 1.3 $348 $376 $413 $496 EFPP1866 18 x 1.6 x 66 9.6 1.6 $430 $463 $509 $612 EFPP2442 24 x 1.6 x 42 7.8 1.2 $343 $368 $405 $487 EFPP2454 24 x 1.6 x 54 9.3 1.6 $383 $412 $452 $542 EFPP2466 24 x 1.6 x 66 10.9 1.9 $465 $500 $549 $659 EFPP3042 30 x 1.6 x 42 8.6 1.5 $359 $386 $424 $509 EFPP3054 30 x 1.6 x 54 10.3 2.1 $433 $466 $512 $615 EFPP3066 30 x 1.6 x 66 11.9 2.4 $485 $520 $572 $688 EFPP3642 36 x 1.6 x 42 9.6 1.8 $436 $470 $515 $619 EFPP3654 36 x 1.6 x 54 11.8 2.3 $491 $528 $581 $697 EFPP3666 36 x 1.6 x 66 13.4 2.8 $611 $655 $720 $864 EFPP4242 42 x 1.6 x 42 10.8 2.1 $476 $512 $564 $676 EFPP4254 42 x 1.6 x 54 12.8 2.7 $533 $571 $628 $753 EFPP4266 42 x 1.6 x 66 14.9 3.3 $656 $705 $775 $932 EFPP4842 48 x 1.6 x 42 11.6 2.4 $493 $531 $584 $700 EFPP4854 48 x 1.6 x 54 13.8 3.3 $572 $616 $677 $814 EFPP4866 48 x 1.6 x 66 15.9 3.8 $676 $728 $801 $962 EFPP5442 54 x 1.6 x 42 12.55 2.8 $509 $546 $602 $723 EFPP6042 60 x 1.6 x 42 13.5 3 $525 $564 $621 $744 Full Whiteboard Panel - One Side Full Fabric Panel - One Side Full whiteboard on one side, full fabric on the opposite side. Available for 42, 54 and 66 H eo+ panels. 2.5 glide allows for 2 height adjustment. Includes two capture strip panel connectors. Must specify Black (BLK) epoxy or Tungsten 2 (TU2) frame finish. Custom sizes are available for eo+ series panels. Next size up add 10%. Frame finish Fabric globalfurnituregroup.com 329

E EO+ FULL WHITEBOARD PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EFFP1842 18 x 1.6 x 42 8.9 1 $413 EFFP1854 18 x 1.6 x 54 10.3 1.3 $426 EFFP1866 18 x 1.6 x 66 11.5 1.6 $528 EFFP2442 24 x 1.6 x 42 9.8 1.2 $422 EFFP2454 24 x 1.6 x 54 11.3 1.6 $470 EFFP2466 24 x 1.6 x 66 12.9 1.9 $571 EFFP3042 30 x 1.6 x 42 10.6 1.5 $442 EFFP3054 30 x 1.6 x 54 12.3 2.1 $533 EFFP3066 30 x 1.6 x 66 13.9 2.4 $595 EFFP3642 36 x 1.6 x 42 11.6 1.8 $538 EFFP3654 36 x 1.6 x 54 13.8 2.3 $603 EFFP3666 36 x 1.6 x 66 15.4 2.8 $748 EFFP4242 42 x 1.6 x 42 12.8 2.1 $585 EFFP4254 42 x 1.6 x 54 14.8 2.7 $654 EFFP4266 42 x 1.6 x 66 16.9 3.3 $807 EFFP4842 48 x 1.6 x 42 13.6 2.4 $605 EFFP4854 48 x 1.6 x 54 15.8 3.3 $703 EFFP4866 48 x 1.6 x 66 17.9 3.8 $831 EFFP5442 54 x 1.6 x 42 14.5 2.8 $625 EFFP6042 60 x 1.6 x 42 15.5 3.8 $646 Full Whiteboard Panel - Two Sides Full whiteboard panels on both sides. Available for 42, 54 and 66 H eo+ panels. Aluminum box frame construction. 2.5 glide allows for 2 height adjustment. Includes two capture strip panel connectors. Must specify Black (BLK) epoxy or Tungsten 2 (TU2) frame finish. Custom sizes are available for eo+ series panels. Next size up add 10%. Frame finish 330 globalfurnituregroup.com

EO+ E PARTIALLY GLAZED PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. GR. 2 GR. 3 GR. 4 GR. 5 EEPPG1842 18 x 1.6 x 42 7.9 1 $284 $305 $335 $402 EEPPG1854 18 x 1.6 x 54 9.3 1.3 $354 $380 $419 $502 EEPPG1866 18 x 1.6 x 66 10.6 1.6 $418 $449 $494 $592 EEPPG2442 24 x 1.6 x 42 8.8 1.2 $284 $305 $335 $402 EEPPG2454 24 x 1.6 x 54 10.3 1.6 $354 $380 $419 $502 EEPPG2466 24 x 1.6 x 66 11.9 1.9 $418 $449 $494 $592 EEPPG3042 30 x 1.6 x 42 9.6 1.5 $336 $361 $397 $476 EEPPG3054 30 x 1.6 x 54 11.3 2 $413 $444 $489 $586 EEPPG3066 30 x 1.6 x 66 12.9 2.4 $476 $512 $564 $676 EEPPG3642 36 x 1.6 x 42 10.6 1.8 $373 $400 $439 $528 EEPPG3654 36 x 1.6 x 54 12.8 2.3 $452 $486 $535 $642 EEPPG3666 36 x 1.6 x 66 14.4 2.8 $534 $572 $629 $757 EEPPG4242 42 x 1.6 x 42 11.8 2.1 $404 $434 $477 $572 EEPPG4254 42 x 1.6 x 54 13.8 2.7 $496 $533 $586 $703 EEPPG4266 42 x 1.6 x 66 15.9 3.3 $585 $628 $691 $829 EEPPG4842 48 x 1.6 x 42 11.6 2.4 $435 $469 $514 $618 EEPPG4854 48 x 1.6 x 54 14.8 3.1 $536 $576 $633 $762 EEPPG4866 48 x 1.6 x 66 15.94 3.8 $633 $682 $750 $900 EEPPG5442 54 x 1.6 x 42 12.55 2.8 $472 $506 $558 $670 EEPPG5454 54 x 1.6 x 54 15.4 3.5 $592 $635 $701 $841 EEPPG5466 54 x 1.6 x 66 17.3 4.2 $713 $767 $844 $1012 EEPPG6042 60 x 1.6 x 42 13.5 3 $506 $544 $599 $719 EEPPG6054 60 x 1.6 x 54 16.07 3 $649 $698 $767 $921 EEPPG6066 60 x 1.6 x 66 18.74 3 $791 $851 $935 $1123 Partially Glazed Panel Partially glazed panels available for 42, 54 and 66 H eo+ panels. Features a Clear, Smoked or Frosted plexiglass window 31 above the floor. Aluminum box frame construction with fabric covered tackable substrate. 2.5 glide allows for 2 height adjustment. Includes two capture strip panel connectors. Must specify Black (BLK) epoxy or Tungsten 2 (TU2) frame finish. Specify Clear (CPG), Smoked (SPG) or Frosted (FPG) plexiglass. Custom sizes are available for eo+ series panels. Next size up add 10%. 54 and 66 high panels only: Optional partial plexiglass window starting at 42 above the panel bottom is available at no charge (both sides MUST BE the same height). Specify (PG42) to panel code (ex: EEPPG3666-PG42). Frame finish Fabric Plexiglass style globalfurnituregroup.com 331

E EO+ FULLY GLAZED PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EEPFG1842 20 x 1.6 x 42 10.8 1 $291 EEPFG1854 20 x 1.6 x 54 13.36 1.3 $357 EEPFG1866 20 x 1.6 x 66 15.3 1.6 $423 EEPFG2442 24 x 1.6 x 42 12.24 1.2 $291 EEPFG2454 24 x 1.6 x 54 15.06 1.6 $357 EEPFG2466 24 x 1.6 x 66 17.3 1.9 $423 EEPFG3042 30 x 1.6 x 42 13.59 1.5 $343 EEPFG3054 30 x 1.6 x 54 16.84 2 $421 EEPFG3066 30 x 1.6 x 66 19.94 2.4 $497 EEPFG3642 36 x 1.6 x 42 15.22 1.8 $391 EEPFG3654 36 x 1.6 x 54 19.38 2.3 $479 EEPFG3666 36 x 1.6 x 66 23.04 2.8 $569 EEPFG4242 42 x 1.6 x 42 17.16 2.1 $441 EEPFG4254 42 x 1.6 x 54 21.16 2.7 $539 EEPFG4266 42 x 1.6 x 66 26.14 3.3 $638 EEPFG4842 48 x 1.6 x 42 18.49 2.4 $491 EEPFG4854 48 x 1.6 x 54 23.5 3.1 $601 EEPFG4866 48 x 1.6 x 66 28.74 3.8 $713 EEPFG5442 54 x 1.6 x 42 20 2.8 $539 EEPFG6042 60 x 1.6 x 42 21.63 3 $587 Fully Glazed Panel Fully glazed panels available for 42, 54 and 66 H eo+ panels. Features a Clear, Smoked or Frosted Plexiglass window 31 above the floor. Aluminum box frame construction. 2.5 glide allows for 2 height adjustment. Includes two capture strip panel connectors. Must specify Black (BLK) epoxy or Tungsten 2 (TU2) frame finish. Specify Clear (CPG), Smoked (SPG) or Frosted (FPG) plexiglass. Custom sizes are available for eo+ series panels. Next size up add 10%. PRIVACY PANEL CONNECTORS EP30 2 x 2 x 30 4 0.13 $34 EP42 2 x 2 x 42 4 0.15 $37 EP54 2 x 2 x 54 5 0.17 $49 EP66 2 x 2 x 66 6 0.19 $62 Corner Posts - 90 Enables 3-way and 4-way panel connections. Lightweight aluminum construction for superior panel connections. Self leveling feature maintains even height of panels and permits fast installation and reconfiguration. Includes two capture strip panel connectors. EP144 2 x 2 x 144 13.2 0.75 $165 Extended Panel Conduit/Corner Post Enables 90 3-way and 4-way connections. 144 height allows cabling to be carried from floor to ceiling. Lightweight aluminum. Includes two capture strip panel connectors. Frame finish Glaze Plexiglass style (fully glazed panels) Metal finish BLK or TU2 (connectors) 332 globalfurnituregroup.com

EO+ E PRIVACY PANEL CONNECTORS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE ETP30 2 x 2 x 30 4 0.13 $43 ETP42 1.75 x 1.75 x 42 4 0.15 $52 ETP54 1.75 x 1.75 x 54 5 0.17 $63 ETP66 1.75 x 1.75 x 66 6 0.19 $77 ETP144 1.75 x 1.75 x 144 13.2 0.75 $180 Corner Posts - 120 Enables 3-way connection to E120WS48 worksurface ONLY. 144 height allows cabling to be carried from floor to ceiling. Lightweight aluminum construction for superior panel connection. Self leveling feature maintains even height of panel and permits fast installation and reconfiguration. Includes two capture strip panel connectors. EEPS30 - x - x 30 0.1 0.5 $7 EEPS42 - x - x 42 0.1 0.5 $8 EEPS54 - x - x 54 0.1 0.5 $8 EEPS66 - x - x 66 0.1 0.5 $8 Pair of Panel Capture Strips Extruded plastic channel which connects two panels, in a straight line or a panel and a corner post. Runs the full height of the panel on both sides providing a strong connection. Two strips (one pair) are required per panel. EPWC30 1.25 x 0.25 x 30 1 0.5 $18 EPWC42 1.25 x 0.25 x 42 1 0.5 $23 EPWC54 1.25 x 0.25 x 54 1.4 0.5 $27 EPWC66 1.25 x 0.25 x 66 1.8 0.5 $32 Panel to Wall Connector Used to start a run of panels from a wall. Lightweight aluminum construction for superior panel connections. Patented knuckle-loc design provides rigid panel to wall connection. Includes two capture strip panel connectors. EESF-1 19 x 1.5 x 1 2 0.1 $25 Self-Supporting Foot For eo+ panels. EEOKP18 18 x 2 x 2.5 0.4 0.06 $23 EEOKP24 24 x 2 x 2.5 0.5 0.07 $26 EEOKP30 30 x 2 x 2.5 0.6 0.09 $29 EEOKP36 36 x 2 x 2.5 0.76 0.1 $32 EEOKP42 42 x 2 x 2.5 0.89 0.12 $37 EEOKP48 48 x 2 x 2.5 1 0.14 $40 EEOKP54 60 x 2 x 2.5 1.15 0.16 $48 EEOKP60 60 x 2 x 2.5 1.26 0.17 $49 Plastic Kick Plate Attaches to the bottom of fabric panels to protect from damage caused by vacuums, etc. EFM 3.75 x 1.5 x 0.5 0.01 0.01 $18 Floor Mount For eo+ panels. Available in Chrome finish only. There are no specifications for Floor Mount. EOCG - 0.01 0.01 $14 Carpet Gripper Fits on the adjustable glides of a panel. Helps to stabilize the panel. Package of 10. Available in Black only. There are no specifications for Carpet Gripper. Metal finish - BLK or TU2 globalfurnituregroup.com 333

E EO+ WORKSURFACES Tops are available in 18, or 30 deep worksurfaces. All worksurfaces have threaded inserts for metal-to-metal connection of support hardware to connect to panels. Power and communication cables are routed through cable scoops at the back of the worksurfaces. There is a 0.375 space between the worksurface and panel to allow wires to pass through. Straight and transitional worksurfaces above 54 have two scoops. All other worksurfaces have one scoop, unless otherwise noted. All connection hardware must be ordered separately. Custom widths and depths are available for all worksurfaces. For custom size pricing use the next size up plus 10%. - More complex custom requests require a quotation. Please contact our Specials Department. - Custom orders must indicate the custom quote number and list price. There can be no changes to the quote. Changes necessitate a new quote. WORKSURFACE SUPPORTS Worksurfaces supported by supporting pedestals and supporting panel hardware. Supporting pedestals are available in Black (BLK) or Tungsten 2 (TU2), please specify. LEG CONSTRUCTION 2 square or tapered steel leg (2 diameter) with a custom designed leveler that adjusts up to 1.5. Leveling is made easy by turning the outside of the leveler by hand. The heavy duty leveling bolt is hidden by the shroud of the leveler. Legs are available in Black (BLK) or Tungsten 2 (TU2), please specify. Levelers are available in Black only. WORKSURFACES MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE 30 36 42 48 54 60 66 72 18 EOR1824 24 x 18 x 1.12 10.12 0.3 $93 EOR1830 30 x 18 x 1.12 16.5 0.54 $93 EOR1836 36 x 18 x 1.12 19.5 0.63 $115 EOR1842 42 x 18 x 1.12 23.25 0.73 $128 EOR1848 48 x 18 x 1.12 26.25 0.83 $145 EOR1854 54 x 18 x 1.12 29.25 0.93 $162 EOR1860 60 x 18 x 1.12 33 1.02 $185 EOR1866 66 x 18 x 1.12 36.75 1.12 $200 EOR1872 72 x 18 x 1.12 39.75 1.21 $238 Rectangular Worksurface - 18 Deep 18 D straight rectangular worksurface. Non-handed and can be interchanged on site. Linking installations only. Worksurfaces 54 wide and larger have two scoops. 66 and longer worksurfaces require a center support gable. 30 36 42 48 54 60 66 72 Rectangular Worksurface - Deep EOR2424 24 x 24 x 1.12 18 0.6 $102 EOR2430 30 x 24 x 1.12 22 0.72 $108 EOR2436 36 x 24 x 1.12 26 0.85 $111 EOR2442 42 x 24 x 1.12 31 0.98 $153 EOR2448 48 x 24 x 1.12 35 1.11 $182 EOR2454 54 x 24 x 1.12 39 1.23 $209 EOR2460 60 x 24 x 1.12 44 1.36 $239 EOR2466 66 x 24 x 1.12 49 1.49 $248 EOR2472 72 x 24 x 1.12 53 1.62 $260 D straight rectangular worksurface. Non-handed and can be interchanged on site. Linking installations only. Worksurfaces 54 wide and larger have two scoops. 66 and longer worksurfaces require a center support gable. Laminate finish 334 globalfurnituregroup.com

EO+ E WORKSURFACES MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE 30 36 42 48 54 60 66 72 30 EOR3024 24 x 30 x 1.12 22 0.74 $116 EOR3030 30 x 30 x 1.12 28 0.9 $124 EOR3036 36 x 30 x 1.12 33 1.06 $145 EOR3042 42 x 30 x 1.12 38 1.22 $200 EOR3048 48 x 30 x 1.12 44 1.38 $209 EOR3054 54 x 30 x 1.12 49 1.54 $230 EOR3060 60 x 30 x 1.12 55 1.69 $248 EOR3066 66 x 30 x 1.12 60 1.85 $258 EOR3072 72 x 30 x 1.12 66 2.01 $273 Rectangular Worksurface - 30 Deep 30 D straight rectangular worksurface. Non-handed and can be interchanged on site. Linking installations only. Worksurfaces 54 wide and larger have two scoops. 66 and longer worksurfaces require a center support gable. 30 36 42 48 54 60 66 72 18 EOTL2424 24 x 24 x 1.12 15 0.59 $128 EOTL2430 30 x 24 x 1.12 19 0.72 $132 EOTL2436 36 x 24 x 1.12 23 0.85 $157 EOTL2442 42 x 24 x 1.12 27 0.98 $181 EOTL2448 48 x 24 x 1.12 31 1.11 $217 EOTL2454 54 x 24 x 1.12 35 1.23 $228 EOTL2460 60 x 24 x 1.12 39 1.36 $256 EOTL2466 66 x 24 x 1.12 43 1.49 $263 EOTL2472 72 x 24 x 1.12 47 1.62 $283 Transition Worksurface - Deep Connects right end to a corner worksurface or a 18 D worksurface. Left end allows the continuation of additional - LEFT D worksurfaces. Linking installations only. Worksurfaces 54 wide and larger have two scoops. 66 and longer worksurfaces require a center support gable. 30 30 36 42 48 54 60 66 72 EOTL3024 24 x 30 x 1.12 19 0.74 $132 EOTL3030 30 x 30 x 1.12 24 0.9 $138 EOTL3036 36 x 30 x 1.12 29 1.06 $157 EOTL3042 42 x 30 x 1.12 34 1.22 $219 EOTL3048 48 x 30 x 1.12 39 1.38 $230 EOTL3054 54 x 30 x 1.12 44 1.54 $247 EOTL3060 60 x 30 x 1.12 49 1.69 $280 EOTL3066 66 x 30 x 1.12 54 1.85 $278 EOTL3072 72 x 30 x 1.12 59 2.01 $300 Transition Worksurface - 30 Deep Connects right end to a corner worksurface or a D worksurface. Left end allows the continuation of additional - LEFT 30 D worksurfaces. Linking installations only. Worksurfaces 54 wide and larger have two scoops. 66 and longer worksurfaces require a center support gable. 30 36 42 48 54 60 66 72 18 EOTR2424 24 x 24 x 1.12 15 0.59 $128 EOTR2430 30 x 24 x 1.12 19 0.72 $132 EOTR2436 36 x 24 x 1.12 23 0.85 $157 EOTR2442 42 x 24 x 1.12 27 0.98 $181 EOTR2448 48 x 24 x 1.12 31 1.11 $217 EOTR2454 54 x 24 x 1.12 35 1.23 $228 EOTR2460 60 x 24 x 1.12 39 1.36 $256 EOTR2466 66 x 24 x 1.12 43 1.49 $263 EOTR2472 72 x 24 x 1.12 47 1.62 $283 Transition Worksurface - Deep Connects left end to a corner worksurface or a 18 D worksurface. Right end allows the continuation of additional - RIGHT D worksurfaces. Linking installations only. Worksurfaces 54 wide and larger have two scoops. 66 and longer worksurfaces require a center support gable. Laminate finish globalfurnituregroup.com 335

E EO+ WORKSURFACES MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE 30 36 42 48 54 60 66 72 30 EOTR3024 24 x 30 x 1.12 19 0.74 $132 EOTR3030 30 x 30 x 1.12 24 0.9 $138 EOTR3036 36 x 30 x 1.12 29 1.06 $157 EOTR3042 42 x 30 x 1.12 34 1.22 $219 EOTR3048 48 x 30 x 1.12 39 1.38 $230 EOTR3054 54 x 30 x 1.12 44 1.54 $247 EOTR3060 60 x 30 x 1.12 49 1.69 $280 EOTR3066 66 x 30 x 1.12 54 1.85 $278 EOTR3072 72 x 30 x 1.12 59 2.01 $300 Transition Worksurface - 30 Deep Connects left end to a corner worksurface or a D worksurface. Right end allows the continuation of additional - RIGHT 30 D worksurfaces. Linking installations only. Worksurfaces 54 wide and larger have two scoops. 66 and longer worksurfaces require a center support gable. CORNER WORKSURFACES 90 Corner Worksurface 36 42 48 36 42 48 18 30 18 30 EO90C3618 36 x 36 x 1.12 24 1.27 $249 EO90C3624 36 x 36 x 1.12 24 1.47 $265 EO90C4224 42 x 42 x 1.12 47 1.7 $359 EO90C4230 42 x 42 x 1.12 53 1.98 $388 EO90C4824 48 x 48 x 1.12 53 2.67 $491 EO90C4830 48 x 48 x 1.12 55 2.67 $492 Connects between two 18 D, two D or two 30 D worksurfaces. Linking installations only. Cannot accept keyboards. 36 42 48 36 42 48 18 30 90 Corner Worksurface - Keyboard 18 30 EOCK3618 36 x 36 x 1.12 34 1.27 $249 EOCK3624 36 x 36 x 1.12 45 1.69 $331 EOCK4224 42 x 42 x 1.12 47 1.7 $363 EOCK4230 42 x 42 x 1.12 50 2.12 $452 EOCK4824 48 x 48 x 1.12 53 2.67 $491 EOCK4830 48 x 48 x 1.12 55 2.67 $452 Connects between two 18 D, two D or two 30 D worksurfaces. Linking installations only. Keyboard can be used when flush plates are used to join corner to other worksurfaces. 36 42 36 42 EC3661824 36 x 36 x 1.12 30 1.47 $265 EC4221824 42 x 42 x 1.12 53.89 2.04 $359 Non-Symmetrical 90 Corner Worksurface 18 Connects between one 18 D on the left, and one D worksurface on the right. Linking installations only. Cannot accept keyboards. 36 42 48 36 42 48 18 30 EC3662418 36 x 36 x 1.12 30 1.47 $265 EC3662430 36 x 36 x 1.12 30 1.47 $267 EC4222418 42 x 42 x 1.12 53.89 2.04 $359 EC4222430 42 x 42 x 1.12 53.89 2.04 $359 EC4842430 48 x 48 x 1.12 70.38 2.66 $491 Non-Symmetrical 90 Corner Worksurface Connects between one D worksurface on the left and either one 18 D or 30 D worksurface on the right. Linking installations only. Cannot accept keyboards. Laminate finish 336 globalfurnituregroup.com

EO+ E WORKSURFACES MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE 36 42 48 36 42 48 EC3663024 36 x 36 x 1.12 30 1.47 $267 EC4223024 42 x 42 x 1.12 70.38 2.66 $359 EC4843024 48 x 48 x 1.12 70.38 2.66 $491 30 Non-Symmetrical 90 Corner Worksurface Connects between one 30 D worksurface on the left and one D worksurface on the right. Linking installations only. Cannot accept keyboards. 36 42 36 42 EK3661824 36 x 36 x 1.12 30 1.47 $267 EK4221824 42 x 42 x 1.12 53.89 2.04 $359 18 Non-Symmetrical 90 Corner Worksurface, Keyboard Connects between one 18 D on the left, and one D worksurface on the right. Linking installations only. Keyboard can be used when flush plates are used to join corner to other worksurfaces. 36 42 48 36 42 48 18 30 EK3662418 36 x 36 x 1.12 39.59 1.47 $267 EK4222418 42 x 42 x 1.12 53.89 2.04 $359 EK4222430 42 x 42 x 1.12 53.89 2.04 $359 EK4842430 48 x 48 x 1.12 53.89 2.04 $491 Non-Symmetrical 90 Corner Worksurface, Keyboard Connects between one D worksurface on the left and either one 18 D or 30 D worksurface on the right. Linking installations only. Keyboard can be used when flush plates are used to join corner to other worksurfaces. 36 42 48 42 48 EK4223024 42 x 42 x 1.12 53.89 2.04 $359 EK4843024 48 x 48 x 1.12 53.89 2.04 $491 30 Non-Symmetrical 90 Corner Worksurface, Keyboard Connects between one 30 D worksurface on the left and one D worksurface on the right. Linking installations only. Keyboard can be used when flush plates are used to join corner to other worksurfaces. E120WS48 86 x 46 x 1.12 98 8 $568 120 Worksurface Connects to two 48 panels and one 120 post. Worksurface to be supported with end gables and/or supporting pedestals. Linking installations only. 48 60 66 72 78 84 36 Extended Corner - 36 Deep - LEFT ELL362448 48 x 36-24 x 1.12 43.92 1.25 $339 ELL362460 60 x 36-24 x 1.12 52.99 1.5 $420 ELL362466 66 x 36-24 x 1.12 57.18 1.62 $470 ELL362472 72 x 36-24 x 1.12 61.58 1.75 $534 ELL362478 78 x 36-24 x 1.12 65.98 1.87 $569 ELL362484 84 x 36-24 x 1.12 70.38 2 $594 Extended worksurface on the right. Connects between two D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. Laminate finish globalfurnituregroup.com 337

E EO+ EXTENDED CORNERS - LEFT MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE 42 60 66 72 78 84 ELL422460 60 x 42-24 x 1.12 55.18 1.5 $494 ELL422466 66 x 42-24 x 1.12 61.58 1.75 $542 ELL422472 72 x 42-24 x 1.12 65.98 1.87 $570 ELL422478 78 x 42-24 x 1.12 70.38 2 $645 ELL422484 84 x 42-24 x 1.12 74.38 2.12 $694 Extended Corner - 42 Deep - LEFT Extended worksurface on the right. Connects between two D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. 60 66 72 78 84 30 42 30 Extended Corner - 42 Deep - LEFT ELL423060 60 x 42-24 x 1.12 63.78 1.82 $494 ELL423066 66 x 42-24 x 1.12 69.28 1.96 $542 ELL423072 72 x 42-24 x 1.12 74.78 2.12 $594 ELL423078 78 x 42-24 x 1.12 80.28 2.28 $670 ELL423084 84 x 42-24 x 1.12 85.78 2.43 $694 Extended worksurface on the right. Connects between two 30 D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. 60 66 72 78 84 48 Extended Corner - 48 Deep - LEFT ELL482460 60 x 48-24 x 1.12 65.18 1.9 $543 ELL482466 66 x 48-24 x 1.12 96.78 3.66 $545 ELL482472 72 x 48-24 x 1.12 76.18 1.95 $645 ELL482478 78 x 48-24 x 1.12 74.78 1.2 $694 ELL482484 84 x 48-24 x 1.12 78.18 4.66 $715 Extended worksurface on the right. Connects between two D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. 60 66 72 78 84 30 48 30 Extended Corner - 48 Deep - LEFT ELL483060 60 x 48-24 x 1.12 68.18 1.93 $569 ELL483066 66 x 48-24 x 1.12 73.68 2.09 $613 ELL483072 72 x 48-24 x 1.12 79.18 2.25 $670 ELL483078 78 x 48-24 x 1.12 84.68 2.4 $743 ELL483084 84 x 48-24 x 1.12 90.18 2.56 $793 Extended worksurface on the right. Connects between two 30 D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. 72 ELKL2472 72 x 36-24 x 1.12 73 2.7 $505 36 18 Extended Corner - Keyboard - LEFT Extended worksurface on the right. Connects between one 18 D worksurface on left and one D worksurface on the right. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. 36 60 66 72 78 84 36 Extended Corner - 36 Deep - RIGHT ELR362448 48 x 24-36 x 1.12 43.92 1.25 $339 ELR362460 60 x 24-36 x 1.12 52.99 1.5 $420 ELR362466 66 x 24-36 x 1.12 57.18 1.62 $470 ELR362472 72 x 24-36 x 1.12 61.58 1.75 $534 ELR362478 78 x 24-36 x 1.12 65.98 1.87 $569 ELR362484 84 x 24-36 x 1.12 70.38 2 $594 Extended worksurface on the left. Connects between two D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. Laminate finish 338 globalfurnituregroup.com

EO+ E EXTENDED CORNERS - RIGHT MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE 60 66 72 78 84 42 ELR422460 60 x 24-42 x 1.12 57.18 1.63 $494 ELR422466 66 x 24-42 x 1.12 61.58 1.75 $542 ELR422472 72 x 24-42 x 1.12 65.98 1.87 $570 ELR422478 78 x 24-42 x 1.12 70.38 2 $645 ELR422484 84 x 24-42 x 1.12 74.38 2.12 $694 Extended Corner - 42 Deep - RIGHT Extended worksurface on the left. Connects between two D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. 30 60 66 72 78 84 30 42 ELR423060 60 x 24-42 x 1.12 63.78 1.82 $494 ELR423066 66 x 24-42 x 1.12 69.28 1.96 $542 ELR423072 72 x 24-42 x 1.12 74.78 2.12 $594 ELR423078 78 x 24-42 x 1.12 80.28 2.28 $670 ELR423084 84 x 24-42 x 1.12 85.78 2.43 $694 Extended Corner - 42 Deep - RIGHT Extended worksurface on the left. Connects between two 30 D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. 60 66 72 78 84 48 Extended Corner - 48 Deep - RIGHT ELR482460 60 x 24-48 x 1.12 65.18 1.9 $543 ELR482466 66 x 24-48 x 1.12 96.78 3.66 $545 ELR482472 72 x 24-48 x 1.12 76.18 1.95 $645 ELR482478 78 x 24-48 x 1.12 74.78 1.2 $694 ELR482484 84 x 24-48 x 1.12 82.12 1.46 $715 Extended worksurface on the left. Connects between two D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. 60 66 72 78 84 30 48 30 Extended Corner - 48 Deep - RIGHT ELR483060 60 x 24-48 x 1.12 68.18 1.93 $569 ELR483066 66 x 24-48 x 1.12 73.68 2.09 $613 ELR483072 72 x 24-48 x 1.12 79.18 2.25 $670 ELR483078 78 x 24-48 x 1.12 84.68 2.4 $743 ELR483084 84 x 24-48 x 1.12 90.18 2.56 $793 Extended worksurface on the left. Connects between two 30 D worksurfaces. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. 72 ELKR2472 72 x 24-36 x 1.12 73 2.7 $505 18 36 Extended Corner, Keyboard - RIGHT Extended worksurface on the left. Connects between one 18 D worksurface on right and one D worksurface on the left. Three cable scoops. Linking installation only. Diagonal woodgrain laminate option NOT available. ELC1818L 18 x 18 x 1.12 7 0.3 $77 ELC2424L 24 x 24 x 1.12 17 0.58 $126 ELC3030L 30 x 30 x 1.12 25.5 0.88 $223 Quarter Round Panel Worksurface The worksurface edge running along the panel face is a slightly different length than that of the worksurface end, causing - LEFT the surface to be handed. The user edge against the adjacent worksurface runs straight for 3 before starting to curve. Linking installation only. Laminate finish globalfurnituregroup.com 339

E EO+ QUARTER ROUND WORKSURFACES MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE ELC1818R 18 x 18 x 1.12 7 0.3 $77 ELC2424R 24 x 24 x 1.12 17 0.58 $126 ELC3030R 30 x 30 x 1.12 25.5 0.88 $223 Quarter Round Panel Worksurface The worksurface edge running along the panel face is a slightly different length than that of the worksurface end, causing - RIGHT the surface to be handed. The user edge against the adjacent worksurface runs straight for 3 before starting to curve. Linking installation only. HATCHET ISLANDS (attachable) 72 30 EMG3672LP 72 x 36 x 29 73 3.22 $691 36 18 Hatchet Island with Post - LEFT Extended island worksurface on the right. Connects to 18 D worksurfaces on the left. Cable scoop is in the center of the 36 wide edge. Includes 2 square monopost. Linking installation only. Shipped easy to assemble in 2 cartons. Woodgrain laminate option NOT available on the diagonal. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. 30 72 EMG3672RP 72 x 36 x 29 73 3.22 $691 18 36 Hatchet Island with Post - RIGHT Extended island worksurface on the left. Connects to 18 D worksurfaces on the right. Cable scoop is in the center of the 36 wide edge. Includes 2 square monopost. Linking installation only. Shipped easy to assemble in 2 cartons. Woodgrain laminate option NOT available on the diagonal. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. D ISLANDS (attachable) 42 48 60 72 30 ED2442IP 42 x 24 x 29 73 1.5 $266 ED2448IP 48 x 24 x 29 73 1.63 $275 ED2460IP 60 x 24 x 29 73 1.88 $326 ED2472IP 72 x 24 x 29 73 2.52 $352 ED3048IP 48 x 30 x 29 73 1.89 $328 ED3060IP 60 x 30 x 29 73 2.21 $351 ED3072IP 72 x 30 x 29 73 2.53 $388 D Island with Post Attaches to edge of worksurfaces. Cable scoop is in the center of the end. Includes 2 square monopost. Linking installation only. Shipped easy to assemble in 2 cartons. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. 36 42 48 panel width ECWSDL36P 36 x 24 x 29 73 1.89 $830 ECWSDL42P 42 x 24 x 29 73 1.68 $883 ECWSDL48P 48 x 24 x 29 73 2.09 $974 120 D Island with Post - LEFT Connects to both a D worksurface and a panel on the right. Cable scoop is in the center of the end. Includes 2 square monopost. Linking installation only. Shipped easy to assemble in 2 cartons. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. Laminate finish Post finish (islands only) 340 globalfurnituregroup.com

EO+ E D ISLANDS (attachable) MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE panel width 36 42 48 ECWSDR36P 36 x 24 x 29 73 1.89 $830 ECWSDR42P 42 x 24 x 29 36.29 1.68 $883 ECWSDR48P 48 x 24 x 29 50.5 2.09 $974 120 D Island with Post - RIGHT Connects to both a D worksurface and a panel on the left. Cable scoop is in the center of the end. Includes 2 square monopost. Linking installation only. Shipped easy to assemble in 2 cartons. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. P ISLANDS (attachable) 30 54 60 66 72 EP24540LP 54 x 24 x 29 45.09 2.02 $308 EP24600LP 60 x 24 x 29 62.51 2.6 $331 EP24660LP 66 x 24 x 29 65.98 2.8 $352 EP24720LP 72 x 24 x 29 71.48 3.02 $447 EP30606LP 60 x 30 x 29 71.48 3.02 $375 EP30666LP 66 x 30 x 29 78.08 3.27 $502 EP30726LP 72 x 30 x 29 84.5 2.93 $537 P Island with Post - LEFT Attaches to edge of worksurfaces. Cable scoop is in the center of the end. Includes 2 square monopost. Linking installation only. Shipped easy to assemble in 2 cartons. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. 54 60 66 72 P Island with Post - RIGHT 30 EP24540RP 54 x 24 x 29 45.09 2.02 $308 EP24600RP 60 x 24 x 29 62.51 2.6 $331 EP24660RP 66 x 24 x 29 65.98 2.8 $352 EP24720RP 72 x 24 x 29 71.48 3.02 $447 EP30606RP 60 x 30 x 29 71.48 3.02 $375 EP30666RP 66 x 30 x 29 78.08 3.27 $502 EP30726RP 72 x 30 x 29 84.5 2.93 $537 Attaches to edge of worksurfaces. Cable scoop is in the center of the end. Includes 2 square monopost. Linking installation only. Shipped easy to assemble in 2 cartons. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. 60 66 72 78 84 30 EWWS2460LP 60 x 24 x 29 57.49 2.33 $388 EWWS2466LP 66 x 24 x 29 56.39 1.98 $418 EWWS2472LP 72 x 24 x 29 66.29 2.67 $448 EWWS2478LP 78 x 24 x 29 70.68 2.83 $490 EWWS2484LP 84 x 24 x 29 75.08 3 $518 EWWS3060LP 60 x 30 x 29 68.49 2.75 $436 EWWS3066LP 66 x 30 x 29 73.98 2.96 $474 EWWS3072LP 72 x 30 x 29 79.48 3.17 $509 EWWS3078LP 78 x 30 x 29 84.98 3.37 $546 EWWS3084LP 84 x 30 x 29 90.48 3.58 $582 Wedge Island - LEFT Attaches to edge of worksurfaces. Two cable scoops on the back side of the worksurface. Includes 2 square monopost. Conference end is 10 deeper than standard depth. Linking installation only. Shipped easy to assemble in 2 cartons. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. Laminate finish Post finish globalfurnituregroup.com 341

E EO+ WEDGE ISLANDS (attachable) MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE 30 60 66 72 78 84 EWWS2460RP 60 x 24 x 29 57.49 2.33 $388 EWWS2466RP 66 x 24 x 29 56.39 1.98 $418 EWWS2472RP 72 x 24 x 29 66.29 2.67 $448 EWWS2478RP 78 x 24 x 29 70.68 2.83 $490 EWWS2484RP 84 x 24 x 29 75.08 3 $518 EWWS3060RP 60 x 30 x 29 68.49 2.75 $436 EWWS3066RP 66 x 30 x 29 73.98 2.96 $474 EWWS3072RP 72 x 30 x 29 79.48 3.17 $509 EWWS3078RP 78 x 30 x 29 84.98 3.37 $546 EWWS3084RP 84 x 30 x 29 90.48 3.58 $582 Wedge Island - RIGHT Attaches to edge of worksurfaces. Two cable scoops on the back side of the worksurface. Includes 2 square monopost. Conference end is 10 deeper than standard depth. Linking installation only. Shipped easy to assemble in 2 cartons. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. RADIUS SPANNER ISLANDS EORW18P 39 x 19.5 x 29 24 0.74 $249 EORW24P 51 x 25.5 x 29 34 1.16 $344 18 24 18 24 Radius Spanner Island - 18 and D Used to connect two back-to-back units of the same depth with a panel. Cable scoop is on the straight edge. Includes one 2 square monopost. Linking installation only. Shipped easy to assemble in 2 cartons. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. EORW30P 63 x 31.5 x 29 51 1.76 $515 30 30 Radius Spanner Island - 30 D Used to connect two back-to-back units of the same depth with a panel. Cable scoop is on the straight edge. Includes two 2 square monoposts. Linking installation only. Shipped easy to assemble in 2 cartons. Post is shipped in separate carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. TRANSACTION TOPS - NOTES Laminate finish Post finish 342 globalfurnituregroup.com

EO+ E TRANSACTION TOPS Tops are available in 12 depth only. For a custom width, ex: ETT1232, take the next larger size - ETT1236 plus 10%. Connecting hardware not included. L transaction top (ELCTT90) covers 12 of a panel. To calculate transaction top CUBIC FOOTAGE: Use the following formula: (W x D x H ) / 1728 = cubic ft. ex. If transaction top required is 21 long, (21 x 12 x 1.125 ) / 1728 = 0.164 ft 3 Round this up to the nearest cube, in this case, 1 cubic foot. To calculate transaction top SHIPPING WEIGHT: Use the following formula: width required x 12 x 1.125 x.031 = weight (lb.) ex. If transaction top required is 20 long, (20 x 12 x 1.125 ) x.031 = 8.37 lbs. EDTT1224 EOCK3618 EOTL2430 ELCTT90 ETT1254 Two Way Connector Transaction Top (ELCTT90) - Use to link transaction tops together at 90. TRANSACTION TOPS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE ETT1212 12 x 12 x 1.12 6 0.22 $48 ETT1218 18 x 12 x 1.12 8 0.3 $60 ETT1224 24 x 12 x 1.12 10 0.38 $71 ETT1230 30 x 12 x 1.12 13 0.46 $86 ETT1236 36 x 12 x 1.12 15 0.54 $93 ETT1242 42 x 12 x 1.12 18 0.62 $110 ETT1248 48 x 12 x 1.12 20 0.7 $118 ETT1254 54 x 12 x 1.12 23 0.78 $132 ETT1260 60 x 12 x 1.12 25 0.86 $151 ETT1266 66 x 12 x 1.12 28 0.94 $168 ETT1272 72 x 12 x 1.12 30 1.02 $185 ETT1278 78 x 12 x 1.12 32 1.1 $204 ETT1284 84 x 12 x 1.12 35 1.18 $220 Straight Transaction Top 12 deep x 1 thick top. Attaches to the top of a 42 panel. Connecting hardware not included. For connecting hardware, see page 344. EDTT1230 36 x 12 x 1.12 18 0.65 $98 EDTT1236 42 x 12 x 1.12 20 0.69 $109 EDTT1242 48 x 12 x 1.12 23 0.74 $125 EDTT1248 54 x 12 x 1.12 26 0.77 $137 EDTT1254 60 x 12 x 1.12 28 0.85 $152 EDTT1260 66 x 12 x 1.12 31 0.94 $175 EDTT1266 72 x 12 x 1.12 34 1.1 $195 EDTT1272 78 x 12 x 1.12 36 1.1 $211 D Transaction Top 12 deep x 1 thick top. Attaches to the top of a 42 panel. Used at the end of a panel run where surface can overhang. Connecting hardware not included. For connecting hardware, page 344. Laminate finish globalfurnituregroup.com 343

E EO+ TRANSACTION TOPS / CONNECTORS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EDDTT1248 60 x 12 x 1.12 28 0.85 $142 EDDTT1254 66 x 12 x 1.12 30 0.9 $159 EDDTT1260 72 x 12 x 1.12 31 0.94 $181 EDDTT1272 84 x 12 x 1.12 36 1.1 $223 Double D Transaction Top 12 deep x 1 thick top. Attaches to the top of a 42 panel. Top overhangs the panel by 6 on either end. Connecting hardware not included. For connecting hardware, see below. 19 19 ELCTT90 19 x 19 x 1.12 12 0.75 $89 L Transaction Top 12 12 19 deep x 1 thick top. Attaches to the top of a 42 panel. Used where two panels meet at a 90 angle. Covers 12 of a panel. Connecting hardware not included. For connecting hardware, see below. 19 EOTT3W 13 x 19 x 1.12 12 0.9 $177 12 13 Three-Way Corner Transaction Top 19 deep x 1 thick top. Attaches to the top of a 42 panel. To connect three way transaction tops; two at 180, the other at 90. Deduct 6 from the width of each adjoining transaction top. Connecting hardware not included. For connecting hardware, see below. 19 EOTT4W 19 x 19 x 1.12 12 0.9 $181 12 19 Four-Way Corner Transaction Top 19 deep x 1 thick top. Attaches to the top of a 42 panel. To connect four transaction tops at 90. Deduct 6 from the width of each adjoining transaction top. Connecting hardware not included. For connecting hardware, see below. ETTCPOSTC 7.5 x 2.75 x 6 2 0.5 $25 Transaction Top Connector - Corner Post Fits into corner post. Plastic corner cap must be removed. Pricing shown is for one piece. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. ETTPANELC 7.5 x 2.75 x 5.25 2 0.5 $25 Transaction Top Connector - Panel Fits into panel frame. Plastic top cap must be removed. Pricing shown is for one piece. Adjacent panels must be the same height. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. Connector finish 344 globalfurnituregroup.com

EO+ E WORKSURFACE SUPPORT HARDWARE MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EEWSBL 1 x 0.25 x 66 0.1 0.1 $10 (left) EEWSBR 1 x 0.25 x 66 0.1 0.1 $10 (right) EEWSB 1 x 0.25 x 66 0.1 0.1 $22 (set) Worksurface Bracket Attaches a worksurface to a panel. *EEWSB (set) includes one left and one right worksurface bracket. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. EFEG18P 1.13 x 18 x 27.62 0.98 0.54 $142 EFEG24P 1.13 x 24 x 27.62 0.98 0.72 $153 EFEG30P 1.13 x 30 x 27.62 0.98 0.9 $227 Full End Gable Attaches a worksurface to a panel with two connecting brackets. Provides solid support of a worksurface. Includes EPTEGBK bracket kit. EMSG224P 1.13 x 10 x 27.62 0.98 0.5 $143 EMSG230P 1.13 x 16 x 27.62 0.98 0.5 $143 Mid-Supporting Gable Provides support to a worksurface spanning two panels. Also used to support and link two adjoining worksurfaces. Includes EPTSGBK bracket kit. EPTPBK 1 x 1 x 6 0.98 0.01 $14 Pedestal Connecting Bracket Kit Screws to the back of the pedestal at the top and bottom. Brackets connect pedestal to panel. Pricing shown is for a pair of brackets. One pair of brackets is required per pedestal. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. EEOPBL 1 x 0.25 x 66 0.1 0.1 $10 (left) EEOPBR 1 x 0.25 x 66 0.1 0.1 $10 (right) Panel to Desk Connector with Velcro Attaches flush end gable of desk to end of panel. Fits into panel slot. Pricing shown is for one piece. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. EFB 3 x 3.75 x - 1 0.2 $10 Flat Bracket Assures alignment on adjoining worksurfaces of the same height. Available in Black only. Laminate finish Connector finish globalfurnituregroup.com 345

E EO+ - NOTES PEDESTALS Worksurface supporting pedestals are 27.62 high and can directly support worksurfaces by screwing through the top of the pedestal and into the underside of the worksurface. A pedestal connecting bracket (EPTPBK) secures the pedestal to a panel (not included). Freestanding pedestals are 27.12 high and can slide under a panel attached worksurface. Cannot be converted to mobile pedestals in the field. Lock included. Steel construction for durability. G Series pedestals have a looped full pull drawer front while EWP series pedestals incorporate soft touch Hytrel pull handles. One pencil tray and plate divider included in the top box drawer. Leveling glides provide 1 height adjustment. Mobile pedestal NOT for use to support worksurfaces. Available in Black (BLK) and Tungsten 2 (TU2), please specify. Worksurface tops are available for pedestals when they are freestanding. Box drawers have ¾ extension steel ball bearing suspension. File drawers have full steel ball bearing suspension. Side rails accommodate letter hanging folders. File bars included for legal size hanging file folders for 19, 23 / and 29 /30. LOCKS Pedestals - all drawers are locking (standard position on the front, top right). Overheads with retracting doors - can be ordered for field installation only (model ESLOCK). Add $25. All keying is random. All components within a workstation or a private office can be keyed alike or keyed differently at no charge. Delivery times will vary. Quantity 1-150 workstations - standard delivery time. Quantity 151+ workstations - additional lead time (approximately 3 weeks). Note: When ordering specified keying, tag each component of the workstation or office with a lock number between 400-550. Your shipping documentation and invoicing will confirm both the specified lock number and any other tagging instructions for each component. PANEL ATTACHED STORAGE All panel attached storage is constructed of steel for durability. Overhead storage units are NOT standard with locks. Interior dimensions of the overhead storage units are 11.75 D and 12 H. The shelf is 12 D and has a back lip to protect the panel fabric. PERSONAL STORAGE Personal storage towers have looped full pull fronts to match the G Series pedestals. TOWERS Locks are included. Leveling glides provide 0.5 height adjustment. Note: Custom widths and depths are NOT available for pedestals, panel attached storage and personal towers. Matching 9300P Series lateral file and storage options. See the Filing and Storage section, beginning on page 550. OPTIONS Desk mounted accessories include keyboard corner plate and pencil drawer. Panel mounted accessories include coat hook, self-supporting foot and accessory rail. Accessory rail supports additional storage and organizational accessories, see page 350. For keyboard trays see Productivity Solutions by Global, page 495. SHIPPING Shipped easy to assemble. 1 per carton, unless otherwise noted. ELECTRICAL COMPONENTS Desk mounted accessories include adapt power/data module (model # EUEDM), mini-adapt power module (model # EUTEM) and mini-adapt data module (model # EUTDM). Panel mounted power bar includes four receptacles, two data jack adapters, two cord management channels, sliding bracket and bezel tree. 346 globalfurnituregroup.com

EO+ E G SERIES PEDESTALS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE GWPS19BBF 15 x 19 x 27.75 70 5.75 $409 GWPS24BBF 15 x 24 x 27.75 84 7.15 $416 GWPS30BBF 15 x 30 x 27.75 94 8.84 $442 Box/Box/File Pedestal Two box and one file drawer pedestal. Designed to support worksurfaces. Looped full pull. Lock mounted on the right hand side. One pencil tray and one plate divider included. Leveling glides are standard. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. GWPS19FF 15 x 19 x 27.75 70 5.75 $409 GWPS24FF 15 x 24 x 27.75 84 7.15 $416 GWPS30FF 15 x 30 x 27.75 94 8.84 $442 File/File Pedestal Two file drawer pedestal. Designed to support worksurfaces. Looped full pull. Lock mounted on the right hand side. Leveling glides are standard. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. GWP19BBF 15 x 19 x 27.38 63 5.65 $409 GWP23BBF 15 x 23 x 27.38 75 6.75 $416 GWP29BBF 15 x 29 x 27.38 80 8.41 $442 Box/Box/File Pedestal Two box and one file drawer pedestal. Freestanding. Looped full pull. Lock mounted on the right hand side. One pencil tray and one plate divider included. Leveling glides are standard. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. GWP19FF 15 x 19 x 27.38 69 5.65 $409 GWP23FF 15 x 23 x 27.38 75 6.75 $416 GWP29FF 15 x 29 x 27.38 80 8.41 $442 File/File Pedestal Two file drawer pedestal. Freestanding. Looped full pull. Lock mounted on the right hand side. Leveling glides are standard. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. GMP19BF 15 x 19 x 21.81 76 4.8 $424 GMP23BF 15 x 23 x 21.81 87 5.7 $435 GMP29BF 15 x 29 x 21.81 93 7 $450 Box/File Pedestal - Mobile One box and one file drawer pedestal. Looped full pull. Lock mounted on the right hand side. One pencil tray and one plate divider included. Includes casters already attached. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. Metal finish globalfurnituregroup.com 347

E EO+ EOP SERIES PEDESTALS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EWPS19BBF 15 x 19 x 27.88 69 5.75 $421 EWPS24BBF 15 x 24 x 27.88 75 7.15 $421 EWPS30BBF 15 x 30 x 27.88 94 8.84 $486 Box/Box/File Pedestal Two box and one file drawer pedestal. Designed to support worksurfaces. Soft touch Hytrel pull handles in Black only. Lock mounted on the right hand side. One pencil tray and one plate divider included. Leveling glides are standard. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. EWPS19FF 15 x 19 x 27.88 69 5.75 $412 EWPS24FF 15 x 24 x 27.88 75 7.15 $412 EWPS30FF 15 x 30 x 27.88 94 8.84 $478 File/File Pedestal Two file drawer pedestal. Designed to support worksurfaces. Soft touch Hytrel pull handles in Black only. Lock mounted on the right hand side. Leveling glides are standard. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. EWP19BBF 15 x 19 x 27.38 69 5.65 $421 EWP23BBF 15 x 23 x 27.38 75 6.75 $421 EWP29BBF 15 x 29 x 27.38 80 5.41 $486 Box/Box/File Pedestal Two box and one file drawer pedestal. Freestanding. Soft touch Hytrel pull handles in Black only. Lock mounted on the right hand side. One pencil tray and one plate divider included. Leveling glides are standard. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. EWP19FF 15 x 19 x 27.38 69 5.65 $412 EWP23FF 15 x 23 x 27.38 75 7 $412 EWP29FF 15 x 29 x 27.38 80 8.41 $478 File/File Pedestal Two file drawer pedestal. Freestanding. Soft touch Hytrel pull handles in Black only. Lock mounted on the right hand side. Leveling glides are standard. Matches the height of two high lateral files. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. PEDESTAL / FILE TOP SURFACES EEP1915 15.25 x 19.62 x 1.12 13.4 0.87 $85 EEP2415 15.25 x 24 x 1.12 15.6 0.87 $86 EEP3015 15.25 x 30 x 1.12 24 1 $140 Pedestal Top Surface eo+ laminate top surface for freestanding pedestal. Metal finish Laminate finish (pedestal top surface only) 348 globalfurnituregroup.com

EO+ E ECONOMY PERSONAL TOWERS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE 93PT-2FL 24 x 24 x 65.25 163 26 $1812 93PT-2FR 24 x 24 x 65.25 163 26 $1812 Personal Tower - 2 File Drawers Ventilated wardrobe section, locker compartment and two file drawers. Looped full pull. Three locks keyed alike. Locker compartment includes two shelves. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. Model 93PT-2FL has wardrobe section on the left and file drawers on the right. Model 93PT-2FR has wardrobe section on the right and file drawers on the left. 93PT-2BFL 24 x 24 x 65.25 166 26 $1812 93PT-2BFR 24 x 24 x 65.25 166 26 $1812 Personal Tower - 2 Box/1 File Drawer Ventilated wardrobe section, locker compartment and two box and one file drawer. Looped full pull. Three locks keyed alike. Locker compartment includes two shelves. Shipped assembled in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. Model 93PT-2BFL has wardrobe section on the left and file drawers on the right. Model 93PT-2BFR has wardrobe section on the right and file drawers on the left. OVERHEAD STORAGE ECOL1224 24 x 12 x 5 5.23 0.83 $81 ECOL1230 30 x 12 x 5 6.62 1.04 $85 ECOL1236 36 x 12 x 5 7.94 1.25 $93 ECOL1242 42 x 12 x 5 9.27 1.45 $97 ECOL1248 48 x 12 x 5 10.59 1.66 $105 ECOL1254 54 x 12 x 5 12.1 1.99 $108 ECOL1260 60 x 12 x 5 13.24 2.08 $111 12 Deep Low Profile Shelf Panel mounted storage shelf with back lip that protects fabric. Includes all attachment hardware. Shipped easy to assemble in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. ECOF1224 24 x 12 x 14.5 27 0.79 $301 ECOF1230 30 x 12 x 14.5 31 0.83 $312 ECOF1236 36 x 12 x 14.5 36 0.99 $346 ECOF1242 42 x 12 x 14.5 41 1.16 $380 ECOF1248 48 x 12 x 14.5 51 1.32 $415 ECOF1254 54 x 12 x 14.5 53 1.66 $451 ECOF1260 60 x 12 x 14.5 56 1.66 $485 12 Deep Overhead with Receding Door Door retracts up and over the cabinet. Inside dimensions - 12 H x 11.75 D. Lock not included. 60 unit is reinforced for proper weight distribution. Shipped easy to assemble in 1 carton. Task lights are available, see page 507. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. ESLOCK - - - $26 Locking Kit* For overhead flipper door storage cabinet. Includes two keys. Can only be field installed. Shipped easy to assemble in 1 carton. Metal finish Key number* globalfurnituregroup.com 349

E EO+ DESK MOUNTED ACCESSORIES MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EEOCKS 18x 18 x 1.12 6 0.3 $61 Corner Keyboard Plate Connects two 1.125 worksurfaces that form a 90 corner into a 45 keyboard support corner surface. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. EEPD 22.5 x 15 x 1.5 2 0.7 $100 Pencil Drawer Provides storage for writing instruments and small items at the workspace. Attaches to the underside of the worksurface with included drawer slides. There are no specifications for Pencil Drawer. Black ABS plastic only. EARC24 24 x 0.75 x 2 0.98 0.02 $95 EARC30 30 x 0.75 x 2 1.23 0.03 $102 EARC36 36 x 0.75 x 2 1.43 0.03 $108 EARC42 42 x 0.75 x 2 1.67 0.04 $114 EARC48 48 x 0.75 x 2 1.91 0.04 $124 EARC54 54 x 0.75 x 2 1.91 0.05 $143 EARC60 60 x 0.75 x 2 2.39 0.05 $147 Accessory Rail Extruded aluminum rail supports off-desk accessories. Attaches to panel edge using preinstalled brackets. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. EECTH - - - $18 Coat Hook Attaches to panel top. Available in Black paint. There are no specifications for Coat Hook. Pricing shown is for one piece. ACCESSORY RAIL ORGANIZERS EEPH 4.25 x 3.75 x 4.5 0.2 0.58 $13 Pencil Holder Mounts on the off-desk accessory rail. ABS plastic. 1 per carton. MUST specify Black (BLK) or Frosted (FR) finish. EEPS 8.5 x 10 x 2 0.6 0.12 $39 Phone Support Telephone tray. Mounts on the off-desk or panel accessory rail. ABS plastic. 1 per carton. MUST specify Black (BLK) or Frosted (FR) finish. Metal finish ABS finish 350 globalfurnituregroup.com

EO+ E ACCESSORY RAIL ORGANIZERS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EEPT 9.5 x 14 x 2 0.9 0.18 $48 Paper Tray Mounts on the off-desk accessory rail. ABS plastic. MUST specify Black (BLK) or Frosted (FR) finish. EEOT 9.5 x 10.25 x 2 0.6 0.13 $36 Organizer Tray Mounts on the off-desk accessory rail. ABS plastic. MUST specify Black (BLK) or Frosted (FR) finish. EESFH 7.25 x 12.5 x 7 1.1 0.15 $51 Slanted File Holder Mounts on the off-desk accessory rail. ABS plastic. MUST specify Black (BLK) or Frosted (FR) finish. EEBH 5 x 10.5 x 9 0.5 0.34 $31 Binder Holder Mounts on the off-desk accessory rail. ABS plastic. MUST specify Black (BLK) or Frosted (FR) finish. EECH 5.5 x 7.5 x 2 0.5 0.55 $26 CD Holder Mounts on the off-desk accessory rail. ABS plastic. MUST specify Black (BLK) or Frosted (FR) finish. EEAH - - 0.1 $3 Accessory Clip Attaches off-desk accessories to rail. Included with all accessory rail organizers. ABS plastic. MUST specify Black (BLK) or Frosted (FR) finish. ABS finish globalfurnituregroup.com 351

E EO+ WHITEBOARD EASEL MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EESL29 29 x 25 x 65.5 53 5.4 $520 EESL36 36 x 25 x 65.5 60 5.4 $682 Whiteboard Easel Features double-sided whiteboard for use with dry erase markers. Two epoxy coated 18 gauge A frame steel legs with locking casters. Plastic tray holds markers/erasers. Also features two predrilled holes with clips to hold flip chart pad (sold separately on page 48). Shipped easy to assemble in 1 carton. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. ELECTRICAL COMPONENTS EUEDM 6.5 x 4 x 2.5 2 0.18 $211 Adapt Power/Data Module Includes two electrical outlets, spaces for two plugs with adapters and a 6 power cord. Data plugs not provided. Available in Black only. EUTEM 3.8 x 3 x 2 1 0.18 $123 Mini-Adapt Power Module Attaches to scoop, 6 long cord. Available in Black only. EUTDM 3.8 x 3 x 2 2 0.18 $99 Mini-Adapt Data Module Attaches to scoop, spaces for two plugs with adapters and a 6 power cord. Data plugs not provided. Available in Black only. EPMAWPB30 30 x 5.5 x 4 8 0.5 $343 EPMAWPB36 36 x 5.5 x 4 10 0.5 $351 EPMAWPB42 42 x 5.5 x 4 12 0.7 $356 EPMAWPB48 48 x 5.5 x 4 15 0.7 $360 Panel Mount Power B Includes four receptacles, two data jack adapters, two cord management channels, sliding bracket and bezel tree. 6 cord. Available in Black only. EIPEC 4.5 x 6.5 x 10.25 1 0.18 $279 Power Cable Interconnecting power entry cable, 15 long cord. Connects up to 8 monuments. Available in Black only. Metal finish (only whiteboard easel) 352 globalfurnituregroup.com

EO+ E ELECTRICAL COMPONENTS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EITTTJC74 3 x 5 x 1.1 1 0.1 $104 Jumper Cable Interconnecting table to table jumper cable, 74 long cord. Available in Black only. EITTTJC96 3 x 5 x 1.1 1.3 0.1 $113 Jumper Cable Interconnecting table to table jumper cable, 96 long cord. Available in Black only. EIEDM 6.5 x 4 x 2.5 2.2 0.18 $199 Interconnecting Electrical/Data Monument Attaches to scoop. Includes two electrical outlets and a space for two data plugs. Available in Black only. EIEM 3.8 x 3 x 2 1 0.18 $132 Interconnecting Electrical Monument Attaches to scoop. Includes two electrical outlets. Available in Black only. ECCCO 20 x 0.5 x 0.5 1 0.1 $12 Cord Cover* For closed overhead to worksurface. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. ECCCOS 16 x 0.5 x 0.5 1 0.1 $12 Cord Cover* For open shelving to worksurface. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. ECCWS 24 x 0.5 x 0.5 1 0.1 $13 Cord Cover* For underside of worksurface to bottom panel. MUST specify Black (BLK) or Tungsten 2 (TU2) finish. Cover finishes* globalfurnituregroup.com 353

E EO+ ELECTRICAL COMPONENTS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EVWM 22 x 2 x 2 0.3 0.1 $36 Vertical Wire Manager Capable of holding electrical and data wires in a vertical position, from underside of worksurface to bottom of panel. There are no specifications for Vertical Wire Manager. Available in Black only. EWM1 12 x 2 x 2 0.2 0.1 $19 EWM1.5 18 x 2 x 2 0.2 0.1 $27 EWM2 24 x 2 x 2 0.3 0.1 $36 EWM2.5 30 x 2 x 2 0.3 0.1 $43 EWM3 36 x 2 x 2 0.4 0.1 $53 EWM3.5 42 x 2 x 2 0.4 0.1 $62 EWM4 48 x 2 x 2 0.5 0.1 $69 EWM4.5 54 x 2 x 2 0.5 0.1 $80 EWM5 60 x 2 x 2 0.6 0.1 $88 EWM5.5 66 x 2 x 2 0.6 0.1 $105 Wire Manager Plastic tray flexes to receive and then hold electrical and data wires. Attaches with two strips of premium 3M two sided tape. There are no specifications for Wire Manager. Available in Black only. 354 globalfurnituregroup.com

DIVIDE Divide is a modular desk mounted panel system that can be retro-installed on many Global desks. The panels can be vertically stacked to provide varying degrees of privacy. The panels are available in laminate or fabric tackboards as well as glazed panels that allow light to pass through. Divide s off-desk accessories help to organize paperwork and free up the workspace. Divide is offered in many laminate and fabric color options to complement any office environment. Features and Benefits Available as fabric, glazed or laminate partitioning panels in an array of heights and widths. Easy to specify: choose the desired panel height and width and its corresponding height divide post(s). A built-in paper management rail (on fabric and glazed panels) is designed to accommodate off-desk accessories for workspace organization. Laminate panels offer an optional wire access cut-out at the bottom of each panel (order as SCP2). Laminate transaction tops are offered in various shapes and sizes, and are standard as either 1 thick or 1.5 thick to match. All Adaptabilities, Correlation, Zira and Genoa laminate colors are offered as well as a wide variety of fabrics. globalfurnituregroup.com 355

D DIVIDE - NOTES GENERAL INFORMATION Divide is a desk mounted panel system that can be field installed at any time on many Global desks. Vertical stacking of varying heights provide semi-private to private work areas. Can be easily installed on Adaptabilities, Correlation, Zira and Genoa desking systems (call for a quotation on fitting other Global desk series). Panels are available in 12, 18, and 36 heights and can be stacked to produce heights of 12, 18,, 30, 36 and 42 for a virtually limitless variety of configurations. Progressive, desk mounted partition system consisting of three major categories: Divide posts - to support the partitions. Partitioning screens - a variety of widths and heights to create personalized privacy; offered in laminate, glaze or select fabrics. Transaction tops - laminate tops ideal for creating reception stations. Designed for use on the Adaptabilities, Correlation, Genoa and Zira laminate desk series, and may be retrofitted onto non-global square edged product if necessary. Global laminate and seating products are in compliance with stringent emission guidelines set out by the GREENGUARD Environmental Institute under the standards for low emitting products and materials. www.greenguard.org. Level 3 Certified. DIVIDE POSTS Available in 6 standard heights: - 12 high - to create semi-private spaces and to support transaction tops. - 18 high - to create semi-private spaces and to support transaction tops. - high - to create semi-private spaces. - 30 high - to create semi-private spaces. - 36 high - to create private spaces and to match the height of 36 high hutches and/or 65 high Adaptabilities, Genoa, Zira and Correlation cabinets. - 42 high - to create private spaces and to match the height of 42 high hutches and/or 72 high Correlation and Zira cabinets. Posts are field installed. Each plate divider includes: 1 post mounting plate, 1 threaded rod, 3 cover strips and 1 top cap plus mounting hardware (contains 8 screws, 1 washer, 1 locking nut). 2 divide posts are required per partitioning panel. Available in Black (BLK) or Silver (SIL) finish, please specify. PARTITIONING SCREENS Available in 4 standard heights: 12, 18, and 36 and can be used in combinations to create systems consisting of 12, 18,, 30, 36 and 42 heights. Available in 3 materials: - Laminate - available in all laminate colors used on Adaptabilities, Correlation, Genoa and Zira (see right). Standard Black accent edging at top and bottom. Optional wire access scoop cut-out is offered, centered at the bottom of the panel - order as SCP2 after model #. - Glazed - choice of Clear, Ribbed or Frosted glazing. Top and bottom rail standard in Black (BLK) or Silver (SIL), please specify. Top rail is designed to accommodate off-desk accessories. - Fabric - available in select panel and seating fabrics (see right). Top and bottom rail standard in Black (BLK) or Silver (SIL), please specify. Top rail is designed to accommodate off-desk accessories. Divide posts partitioning panels are sold separately. Panels are 5.5 less wide than stated widths. TRANSACTION TOPS Tops are available in 1 or 1.5 thick thermally fused laminate. Tops are sealed with Global s preferred edging in matching color. Woodgrain surfaces feature edging with matching printed woodgrain. Transaction tops are available with optional edges at no upcharge, please specify (see right column). A3 1 top, standard flat edge AR 1 top, bicut edge C3 1.5 top, standard CR 1.5 top, bicut edge FL 1.5 top, fluted edge flat edge Includes all necessary flat mounting plates and joining plates. Features predrilled locating holes to allow for quick alignment with the divide post. Available with a radius cut on one or both ends (each radius adds a 6 overhang). LAMINATE AND EDGE FINISHES (laminate panels and transaction tops) ACJ Absolute Acajou HGT Hayden Grey ASN Asian Night QTM Quartered Mahogany AWC Avant Cherry SKC Shaker Cherry AWH Avant Honey SOG Storm Grey BLK Black TFW Tiger Fruitwood BRC Brushed Cobalt TMP Tiger Maple CMB Clear Maple TWL Tiger Walnut CSJ Constellation Java WHE Walnut Heights DES Dark Espresso WHC White Chocolate* DWT Designer White WGY Willow Grey GRY Grey WCR Winter Cherry *textured FABRICS (fabric screens) Note: Fabric screens can be upholstered in all of the following fabrics: Accent Collection Agate II Anchorage Brinx Lola Mariposa Meander* (upholstered horizontally) Tracery* Universe* * Contact Customer Service for pricing. 356 globalfurnituregroup.com

DIVIDE - NOTES D PLEASE NOTE: Divide screens cannot be centered between two back to back worksurfaces. Screens must be installed on one worksurface or the other. Divide cannot be used with Adaptabilities or Correlation reception units. Correct installation Incorrect installation HOW TO ORDER DIVIDE SCREENS example: DTB 1236 GN31 DTB 12 36* GN31 fabric code width* (of worksurface to be used on) height (of screen) style code (fabric, glazed or laminate) *NOTE: number denotes width of worksurface to use - please see dimensions in price book for actual dimensions of the screen. PARTS AND COMPONENTS transaction top joining plate transaction top laminate panel transaction top flat plate divide post accessory rail (built in) fabric tackboard top cap glazed panel cover strip scoop (optional) laminate filler panel locking nut screws washer threaded rod post mounting plate divide post cover strip INSTALLATION IS AS SIMPLE AS 1...2...3 1) Attach the threaded post mounting plate with enclosed screws to the top side of the worksurface. 2) Divide post is bolted to the mounting plate. 3) Top cap is attached to the top of the divide post. globalfurnituregroup.com 357

D DIVIDE - CONFIGURATIONS 12 high system 12 panel 18 high system 18 panel high system panel or 12 panel 12 panel 30 high system 12 panel 18 panel 36 high system 18 panel 36 panel or or 18 panel 12 panel 12 panel 12 panel 18 panel 18 panel 42 high system panel or 12 panel 12 panel 358 globalfurnituregroup.com

DIVIDE D FABRIC PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE DTB1220 20 x 0.68 x 12 3 0.3 $196 DTB1224 24 x 0.68 x 12 4 0.3 $216 DTB1229 29 x 0.68 x 12 4 0.4 $254 DTB1230 30 x 0.68 x 12 5 0.4 $254 DTB1236 36 x 0.68 x 12 5 0.4 $272 DTB1242 42 x 0.68 x 12 6 0.5 $294 DTB1248 48 x 0.68 x 12 7 0.6 $313 DTB1260 60 x 0.68 x 12 9 0.7 $362 DTB1266 66 x 0.68 x 12 10 0.8 $398 DTB1272 72 x 0.68 x 12 11 0.8 $428 Fabric Panel - 12 High Features built-in accessory rail. Includes matching filler panel. Specify DTB1229 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Top and bottom rail are offered in Black (BLK) or Silver (SIL), please specify. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. DTB1820 20 x 0.68 x 18 4 0.3 $209 DTB1824 24 x 0.68 x 18 5 0.4 $225 DTB1829 29 x 0.68 x 18 6 0.5 $272 DTB1830 30 x 0.68 x 18 6 0.5 $272 DTB1836 36 x 0.68 x 18 7 0.6 $301 DTB1842 42 x 0.68 x 18 8 0.7 $301 DTB1848 48 x 0.68 x 18 10 0.8 $332 DTB1860 60 x 0.68 x 18 12 0.9 $362 DTB1866 66 x 0.68 x 18 14 1 $465 DTB1872 72 x 0.68 x 18 14 1.1 $499 Fabric Panel - 18 High Features built-in accessory rail. Includes matching filler panel. Specify DTB1829 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Top and bottom rail are offered in Black (BLK) or Silver (SIL), please specify. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. DTB2420 20 x 0.68 x 24 4 0.4 $216 DTB2424 24 x 0.68 x 24 4 0.5 $234 DTB2429 29 x 0.68 x 24 6 0.6 $298 DTB2430 30 x 0.68 x 24 6 0.6 $298 DTB2436 36 x 0.68 x 24 7 0.7 $316 DTB2442 42 x 0.68 x 24 8 0.8 $346 DTB2448 48 x 0.68 x 24 9 0.9 $371 DTB2460 60 x 0.68 x 24 11 1.1 $450 DTB2466 66 x 0.68 x 24 12 1.2 $477 DTB2472 72 x 0.68 x 24 14 1.4 $516 Fabric Panel - High Features built-in accessory rail. Includes matching filler panel. Specify DTB2429 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Top and bottom rail are offered in Black (BLK) or Silver (SIL), please specify. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. Fabric globalfurnituregroup.com 359

D DIVIDE FABRIC PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE DTB3620 20 x 0.68 x 36 6 0.6 $254 DTB3624 24 x 0.68 x 36 7 0.7 $272 DTB3629 29 x 0.68 x 36 9 0.9 $320 DTB3630 30 x 0.68 x 36 9 0.9 $320 DTB3636 36 x 0.68 x 36 10 1 $469 DTB3642 42 x 0.68 x 36 12 1.2 $499 DTB3648 48 x 0.68 x 36 14 1.3 $546 DTB3660 60 x 0.68 x 36 17 1.6 $662 DTB3666 66 x 0.68 x 36 19 1.8 $683 DTB3672 72 x 0.68 x 36 21 1.9 $712 Fabric Panel - 36 High Features built-in accessory rail. Includes matching filler panel. Specify DTB3629 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Top and bottom rail are offered in Black (BLK) or Silver (SIL), please specify. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. GLAZED PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE DGP1220 20 x 0.68 x 12 2 0.3 $160 DGP1224 24 x 0.68 x 12 3 0.3 $186 DGP1229 29 x 0.68 x 12 3 0.4 $219 DGP1230 30 x 0.68 x 12 4 0.4 $219 DGP1236 36 x 0.68 x 12 4 0.4 $257 DGP1242 42 x 0.68 x 12 5 0.5 $287 DGP1248 48 x 0.68 x 12 5 0.6 $346 DGP1260 60 x 0.68 x 12 7 0.7 $415 DGP1266 66 x 0.68 x 12 7 0.8 $450 DGP1272 72 x 0.68 x 12 8 0.8 $482 Glazed Panel - 12 High Features built-in accessory rail. Includes matching filler panel. Specify DGP1229 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Top and bottom rail are offered in Black (BLK) or Silver (SIL), please specify. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. Glazing is available in Frosted (GF), Clear (GC) or Ribbed (RG). DGP1820 20 x 0.68 x 18 3 0.3 $186 DGP1824 24 x 0.68 x 18 3 0.4 $209 DGP1829 29 x 0.68 x 18 4 0.5 $248 DGP1830 30 x 0.68 x 18 4 0.5 $248 DGP1836 36 x 0.68 x 18 5 0.6 $287 DGP1842 42 x 0.68 x 18 5 0.7 $320 DGP1848 48 x 0.68 x 18 6 0.8 $386 DGP1860 60 x 0.68 x 18 8 0.9 $465 DGP1866 66 x 0.68 x 18 8 1 $502 DGP1872 72 x 0.68 x 18 9 1.1 $540 Glazed Panel - 18 High Features built-in accessory rail. Includes matching filler panel. Specify DGP1829 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Top and bottom rail are offered in Black (BLK) or Silver (SIL), please specify. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. Glazing is available in Frosted (GF), Clear (GC) or Ribbed (RG). Fabric (fabric panels) Glaze (glazed panels) 360 globalfurnituregroup.com

DIVIDE D GLAZED PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE DGP2420 20 x 0.68 x 24 3 0.4 $209 DGP2424 24 x 0.68 x 24 4 0.5 $234 DGP2429 29 x 0.68 x 24 4 0.6 $284 DGP2430 30 x 0.68 x 24 5 0.6 $284 DGP2436 36 x 0.68 x 24 5 0.7 $332 DGP2442 42 x 0.68 x 24 6 0.8 $375 DGP2448 48 x 0.68 x 24 7 0.9 $444 DGP2460 60 x 0.68 x 24 9 1.1 $536 DGP2466 66 x 0.68 x 24 10 1.2 $585 DGP2472 72 x 0.68 x 24 10 1.4 $629 Glazed Panel - High Features built-in accessory rail. Includes matching filler panel. Specify DGP2429 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Top and bottom rail are offered in Black (BLK) or Silver (SIL), please specify. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. Glazing is available in Frosted (GF), Clear (GC) or Ribbed (RG). DGP3620 20 x 0.68 x 36 4 0.6 $257 DGP3624 24 x 0.68 x 36 4 0.7 $284 DGP3629 29 x 0.68 x 36 5 0.9 $342 DGP3630 30 x 0.68 x 36 6 0.9 $342 DGP3636 36 x 0.68 x 36 7 1 $403 DGP3642 42 x 0.68 x 36 8 1.2 $456 DGP3648 48 x 0.68 x 36 9 1.3 $540 DGP3660 60 x 0.68 x 36 11 1.6 $657 DGP3666 66 x 0.68 x 36 12 1.8 $718 DGP3672 72 x 0.68 x 36 13 1.9 $773 Glazed Panel - 36 High Features built-in accessory rail. Includes matching filler panel. Specify DGP3629 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Top and bottom rail are offered in Black (BLK) or Silver (SIL), please specify. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. Glazing is available in Frosted (GF), Clear (GC) or Ribbed (RG). LAMINATE PANELS DLP1220 20 x 0.68 x 12 5 0.3 $53 DLP1224 24 x 0.68 x 12 5 0.3 $64 DLP1229 29 x 0.68 x 12 7 0.4 $80 DLP1230 30 x 0.68 x 12 7 0.4 $80 DLP1236 36 x 0.68 x 12 8 0.4 $87 DLP1242 42 x 0.68 x 12 10 0.5 $102 DLP1248 48 x 0.68 x 12 11 0.6 $116 DLP1260 60 x 0.68 x 12 14 0.7 $128 DLP1266 66 x 0.68 x 12 16 0.8 $141 DLP1272 72 x 0.68 x 12 17 0.8 $156 Laminate Panel - 12 High Includes matching filler panel. Scoop option (SCP2) available, add $28. Specify DLP1229 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. Finish (laminate panels) Glaze (glazed panels) globalfurnituregroup.com 361

D DIVIDE LAMINATE PANELS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE DLP1820 20 x 0.68 x 18 7 0.3 $64 DLP1824 24 x 0.68 x 18 8 0.4 $73 DLP1829 29 x 0.68 x 18 10 0.5 $89 DLP1830 30 x 0.68 x 18 10 0.5 $89 DLP1836 36 x 0.68 x 18 12 0.6 $102 DLP1842 42 x 0.68 x 18 15 0.7 $121 DLP1848 48 x 0.68 x 18 17 0.8 $138 DLP1860 60 x 0.68 x 18 21 0.9 $152 DLP1866 66 x 0.68 x 18 23 1 $168 DLP1872 72 x 0.68 x 18 25 1.1 $186 Laminate Panel - 18 High Includes matching filler panel. Scoop option (SCP2) available, add $28. Specify DLP1829 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. DLP2420 20 x 0.68 x 24 9 0.4 $73 DLP2424 24 x 0.68 x 24 11 0.5 $83 DLP2429 29 x 0.68 x 24 13 0.6 $102 DLP2430 30 x 0.68 x 24 13 0.6 $102 DLP2436 36 x 0.68 x 24 16 0.7 $116 DLP2442 42 x 0.68 x 24 19 0.8 $138 DLP2448 48 x 0.68 x 24 22 0.9 $156 DLP2460 60 x 0.68 x 24 28 1.1 $176 DLP2466 66 x 0.68 x 24 30 1.2 $196 DLP2472 72 x 0.68 x 24 33 1.4 $216 Laminate Panel - High Includes matching filler panel. Scoop option (SCP2) available, add $28. Specify DLP2429 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. DLP3620 20 x 0.68 x 36 13 0.6 $93 DLP3624 24 x 0.68 x 36 16 0.7 $102 DLP3629 29 x 0.68 x 36 20 0.9 $128 DLP3630 30 x 0.68 x 36 20 0.9 $128 DLP3636 36 x 0.68 x 36 24 1 $147 DLP3642 42 x 0.68 x 36 28 1.2 $170 DLP3648 48 x 0.68 x 36 33 1.3 $196 DLP3660 60 x 0.68 x 36 41 1.6 $225 DLP3666 66 x 0.68 x 36 45 1.8 $248 DLP3672 72 x 0.68 x 36 50 1.9 $272 Laminate Panel - 36 High Includes matching filler panel. Scoop option (SCP2) available, add $28. Specify DLP3629 for panels placed along the depth side of a 30 deep worksurface. 1 set per carton. Model # depicts size of worksurface to be used on - see notes on page 357 for additional ordering information. Divide post MUST be ordered separately. Two posts are required per panel. Finish 362 globalfurnituregroup.com

DIVIDE D ACCESSORY RAIL ORGANIZERS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EEPH 4.25 x 3.75 x 4.5 0.2 0.58 $13 Pencil Holder Mounts on the off-desk accessory rail. ABS plastic. Cannot be used on Divide laminate panels. MUST specify Black (BLK) or Frosted (FR) finish. EEPS 8.5 x 10 x 2 0.6 0.12 $39 Phone Support pic Telephone tray. Mounts on the off-desk or panel accessory rail. ABS plastic. Cannot be used on Divide laminate panels. MUST specify Black (BLK) or Frosted (FR) finish. EEPT 9.5 x 14 x 2 0.9 0.18 $48 Paper Tray Mounts on the off-desk accessory rail. ABS plastic. Cannot be used on Divide laminate panels. MUST specify Black (BLK) or Frosted (FR) finish. EEOT 9.5 x 10.25 x 2 0.6 0.13 $36 Organizer Tray Mounts on the off-desk accessory rail. ABS plastic. Cannot be used on Divide laminate panels. MUST specify Black (BLK) or Frosted (FR) finish. EESFH 7.25 x 12.5 x 7 1.1 0.15 $51 Slanted File Holder Mounts on the off-desk accessory rail. ABS plastic. Cannot be used on Divide laminate panels. MUST specify Black (BLK) or Frosted (FR) finish. EEBH 5 x 10.5 x 9 0.5 0.34 $31 Binder Holder Mounts on the off-desk accessory rail. ABS plastic. Cannot be used on Divide laminate panels. MUST specify Black (BLK) or Frosted (FR) finish. Finish globalfurnituregroup.com 363

D DIVIDE ACCESSORY RAIL ORGANIZERS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE EECH 5.5 x 7.5 x 2 0.5 0.55 $26 CD Holder Mounts on the off-desk accessory rail. ABS plastic. Cannot be used on Divide laminate panels. MUST specify Black (BLK) or Frosted (FR) finish. EEAH - - 0.1 $3 Accessory Clip Attaches off-desk accessories to rail. Included with all accessory rail organizers. ABS plastic. Cannot be used on Divide laminate panels. MUST specify Black (BLK) or Frosted (FR) finish. DIVIDE POSTS DPOST12 1.68 x 1.68 x 12 3 0.1 $73 DPOST18 1.68 x 1.68 x 18 3 0.1 $102 DPOST24 1.68 x 1.68 x 24 3 0.1 $141 DPOST30 1.68 x 1.68 x 30 3 0.1 $196 DPOST36 1.68 x 1.68 x 36 4 0.2 $219 DPOST42 1.68 x 1.68 x 42 5 0.2 $248 Divide Post For supporting panels. Includes one post, one mounting plate, one top cap, three cover strips, threaded rod and all mounting hardware. Installation templates are supplied with each project. MUST specify Black (BLK) or Silver (SIL). Requires 2 divide posts per panel. Divide post is mounted 1,063 from worksurface edge. DFS12 0.75 x 1.43 x 12 2 0.5 $43 DFS18 0.75 x 1.43 x 18 2 0.5 $43 DFS24 0.75 x 1.43 x 24 2 0.5 $43 DFS30 0.75 x 1.43 x 30 2 0.5 $43 DFS36 0.75 x 1.43 x 36 2 0.5 $43 DFS42 0.75 x 1.43 x 42 3 0.6 $43 Post-to-Wall Filler Strip Used to fill gap between divide post and an adjacent wall, wardrobe unit, or hutch. Black only. Finish 364 globalfurnituregroup.com

DIVIDE D TRANSACTION TOPS To order a radius end on one side of a transaction top, add the suffix D to the model number (ex. DATT30D). Add 15% upcharge. To order a radius end on both sides of a transaction top, add the suffix DD to the model number (ex. DATT30DD). Add 20% upcharge. Each radius end adds a 6 overhang per side (see illustrations below). 6 6 Transaction top is offset 6 from edge of worksurface in both directions. Transaction top is offset 4 from the center of divide post towards the 8 4 inside and 8 toward the outside. 42 36 6 DATT36D A42245C A3030LK Transaction Top Offset DATT2W DATT36 DATT30D - 4 from the center of the divide post to the inside of worksurface. Two Way Connector Transaction Top (DATT2W/DCTT2W) - 8 from the center of the divide post to the outside of worksurface. Use with a corner worksurface to link transaction tops together. 30 30 30 6 A3030LK DATT30D 6 30 6 A3030L DATT30DD Radius End Transaction Top - One Side Add suffix D to model number for radius end on one side. Radius End Transaction Top - Two Sides Add suffix DD to model number for radius end on both sides. STRAIGHT TRANSACTION TOPS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE DATT14 14 x 12 x 1 7 0.3 $97 DATT18 18 x 12 x 1 8 0.4 $97 DATT20 20 x 12 x 1 9 0.5 $97 DATT23 23 x 12 x 1 10 0.5 $97 DATT24 24 x 12 x 1 10 0.5 $97 DATT29 29 x 12 x 1 12 0.6 $147 DATT30 30 x 12 x 1 12 0.6 $147 DATT36 36 x 12 x 1 14 0.7 $147 DATT42 42 x 12 x 1 16 0.8 $196 DATT48 48 x 12 x 1 18 0.9 $196 DATT54 54 x 12 x 1 21 1 $244 DATT60 60 x 12 x 1 23 1.1 $244 DATT66 66 x 12 x 1 25 1.2 $294 DATT72 72 x 12 x 1 27 1.3 $294 Straight Transaction Top - 1 Thick 12 deep x 1 thick top. Includes all necessary flat plates, joining plates and screws. Thickness matches Adaptabilities, Genoa and Zira series worksurfaces. 1 set per carton. Add D to model number for radius end on one side. Add 15% upcharge (excluding 18 this must be quoted). Add DD to model number for radius end on both sides. Add 20% upcharge. Each radius adds 6 overhang per side. Laminate finish (transaction tops) Optional specifications Edge detail globalfurnituregroup.com 365

D DIVIDE STRAIGHT TRANSACTION TOPS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE DCTT14 14 x 12 x 1.5 9 0.3 $147 DCTT18 18 x 12 x 1.5 11 0.4 $147 DCTT20 20 x 12 x 1.5 12 0.5 $147 DCTT23 23 x 12 x 1.5 14 0.5 $147 DCTT24 24 x 12 x 1.5 14 0.5 $147 DCTT29 29 x 12 x 1.5 17 0.6 $219 DCTT30 30 x 12 x 1.5 17 0.6 $219 DCTT36 36 x 12 x 1.5 20 0.7 $219 DCTT42 42 x 12 x 1.5 23 0.8 $269 DCTT48 48 x 12 x 1.5 26 0.9 $269 DCTT54 54 x 12 x 1.5 29 1 $316 DCTT60 60 x 12 x 1.5 32 1.1 $316 DCTT66 66 x 12 x 1.5 35 1.2 $365 DCTT72 72 x 12 x 1.5 38 1.3 $365 Straight Transaction Top - 1.5 Thick 12 deep x 1.5 thick top. Includes all necessary flat plates, joining plates and screws. Thickness matches Correlation and Zira series worksurfaces. 1 set per carton. Add D to model number for radius end on one side. Add 15% upcharge (excluding 18 this must be quoted). Add DD to model number for radius end on both sides. Add 20% upcharge. Each radius adds 6 overhang per side. GALLERY CORNER TRANSACTION TOPS 36/42 36/42 DA1GC36 36 x 36 x 1 32 5 $621 DA1GC42 42 x 42 x 1 38 6.5 $621 12 Gallery Corner Transaction Top One piece corner top to be used on 36 and 42 5-sided corners. Cut-out maximizes use of worksurface space allowing for 1 Thick computer screen. Includes all necessary flat plates, joining plates and screws. Thickness matches Adaptabilities, Genoa and Zira series worksurfaces. 1 set per carton. Woodgrain runs in two directions. Transaction tops are only to be used on 12 high divide posts. Taller posts are not safe. 36/42 36/42 DC1GC36 36 x 36 x 1.5 43 5 $718 DC1GC42 42 x 42 x 1.5 50 6.5 $718 12 Gallery Corner Transaction Top One piece corner top to be used on 36 and 42 5-sided corners. Cut-out maximizes use of worksurface space allowing for - 1.5 Thick computer screen. Includes all necessary flat plates, joining plates and screws. Thickness matches Correlation and Zira series worksurfaces. 1 set per carton. Woodgrain runs in two directions. Transaction tops are only to be used on 12 high divide posts. Taller posts are not safe. 2 PIECE GALLERY CORNER TRANSACTION TOPS 36/42 36/42 DA2GC36 36 x 36 x 1 29 1.9 $424 DA2GC42 42 x 42 x 1 33 1.9 $424 12 2 Piece Gallery Corner Two piece corner top to be used on 36 and 42 5-sided corners. Cut-out maximizes use of worksurface space allowing for Transaction Top - 1 Thick computer screen. Includes all necessary flat plates, joining plates and screws. Thickness matches Adaptabilities, Genoa and Zira series worksurfaces. 1 set per carton. Woodgrain runs in two directions. Transaction tops are only to be used on 12 high divide posts. Taller posts are not safe. Laminate finish Optional specifications Edge detail 366 globalfurnituregroup.com

DIVIDE D 2 PIECE GALLERY CORNER TOPS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE DA2GC66L 66 x 36 x 1 37 3 $595 Two piece corner top to be used on 30 x 66 desktop. D radius end on long transaction top. Includes all necessary flat 2 Piece Extended Gallery Corner plates, joining plates and screws. Thickness matches Adaptabilities, Genoa and Zira series worksurfaces. 1 set per carton. Transaction Top - 1 Thick - LEFT Woodgrain runs in two directions. Transaction tops are only to be used on 12 high divide post. Taller posts are not safe. DA2GC66R 66 x 36 x 1 37 3 $595 Two piece corner top to be used on 30 x 66 desktop. D radius end on long transaction top. Includes all necessary flat 2 Piece Extended Gallery Corner plates, joining plates and screws. Thickness matches Adaptabilities, Genoa and Zira series worksurfaces. 1 set per carton. Transaction Top - 1 Thick - RIGHT Woodgrain runs in two directions. Transaction tops are only to be used on 12 high divide posts. Taller posts are not safe. DC2GC36 36 x 36 x 1.5 39 1.9 $521 DC2GC42 42 x 42 x 1.5 45 1.9 $521 2 Piece Gallery Corner Two piece corner top to be used on 36 and 42 5-sided corners. Cut-out maximizes use of worksurface space allowing for Transaction Top - 1.5 Thick computer screen. Includes all necessary flat plates, joining plates and screws. Thickness matches Correlation and Zira series worksurfaces. 1 set per carton. Woodgrain runs in two directions. Transaction tops are only to be used on 12 high divide posts. Taller posts are not safe. 2-WAY CONNECTOR TOPS DATT2W 12 x 12 x 1 6 0.3 $170 2-Way Connector Transaction Top - 1 Thick Used as a corner piece to link four transaction tops. Deduct 6 from each side adjoining the corner piece. Includes all necessary flat plates, joining plates and screws. Thickness matches Adaptabilities, Genoa and Zira series worksurfaces. 1 set per carton. Woodgrain runs diagonally. Transaction tops are only to be used on 12 high divide posts. Taller posts are not safe. DCTT2W 12 x 12 x 1.5 7 0.3 $244 2-Way Connector Transaction Top - 1.5 Thick Used as a corner piece to link four transaction tops. Deduct 6 from each side adjoining the corner piece. Includes all necessary flat plates, joining plates and screws. Thickness matches Correlation and Zira series worksurfaces. 1 set per carton. Woodgrain runs diagonally. Transaction tops are only to be used on 12 high divide posts. Taller posts are not safe. Laminate finish Optional specifications Edge detail globalfurnituregroup.com 367

D DIVIDE 4-WAY CONNECTOR TOPS MODEL # DIMENSIONS WT/LB. CUBIC FT. LIST PRICE DATT4W 12 x 12 x 1 8 0.3 $147 4-Way Connector Transaction Top - 1 Thick Used as a corner piece to link four transaction tops. Deduct 6 from each side adjoining the corner piece. Includes all necessary flat plates, joining plates and screws. Thickness matches Adaptabilities, Genoa and Zira series worksurfaces. 1 set per carton. Woodgrain runs diagonally. Transaction tops are only to be used on 12 high divide posts. Taller posts are not safe. DCTT4W 12 x 12 x 1.5 10 0.3 $219 4-Way Connector Transaction Top - 1.5 Thick Used as a corner piece to link four transaction tops. Deduct 6 from each side adjoining the corner piece. Includes all necessary flat plates, joining plates and screws. Thickness matches Correlation and Zira series worksurfaces. 1 set per carton. Woodgrain runs diagonally. Transaction tops are only to be used on 12 high divide posts. Taller posts are not safe. Laminate finish Optional specifications Edge detail 368 globalfurnituregroup.com