ISO 2858 Back Pullout End Suction Centrifugal Pumps

ISO 2858 Back Pullout End Suction Centrifugal Pumps

Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed to comply with ISO 2858 standard. Back Pull out design. No pipe work dismantling for seal/impeller changes Cast Iron body casing with Bronze impellers and stainless steel shaft as standard. Bare shaft and frame mounted for direct coupling to electric motors, engines or pulley drives. Direct coupled to 2 pole and 4 pole IEC motor configurations. Designed for vertical centre line discharge. Suitable for horizontal mounting Single or double Carbon ceramic mechanical seals. Balanced or unbalanced configuration. Bearing housings fitted heavy duty deep groove ball bearings. All bare shaft pumps are fitted with greased for life bearings. Table E flanges on suction and discharge. Operating Conditions Flows: Max 9M³/Hr Head: Max 16M Liquid Temperature: -15 C 85 C with standard seal and up to 14 C with special Mechanical seal. Maximum Working Pressure: 16 Bar Available on request:* Materials of construction options, see Material Specification. Wear rings back and/or front. Mechanical seal variants. Packed glands. External seal flushing. Sight glass for oil level. *May require special order, consult Franklin for details 2

Model Number Explanation ISO 3 4 2 1 2 1 2 1 Sealing Option 1 = Standard (Carbon/Ceramic/Nitrile) 2 = Gland Packing Motor kw Rating 1 = 2.2kW 1 = 22kW 2 = 3.kW 11 = 3kW 3 = 4.kW 12 = 37kW 4 = 5.5kW 13 = 45kW 5 = 7.5kW 14 = 55kW 6 = 11kW 15 = 75kW 7 = 15kW 16 = 9kW 9 = 18.5kW 17 = 11kW 18 = 132kW = Bare Shaft Motor Voltage Rating 5Hz 6Hz 1 = 38V/3Ph/5Hz 5 = 22V/Ph/6Hz 2 = 38/415V/3Ph/5Hz 6 = 38V/3Ph/6Hz 3 = 38/66V/3Ph/5Hz 7 = 22/38V/3Ph/6Hz 4 = 38-415/66V/3Ph/5Hz 8 = 22/46V/3Ph/6Hz Motor Frequency/Speed (Pole) 1 = 5Hz, 2P 4 = 6Hz, 2P 2 = 5Hz, 4P 5 = 6Hz, 4P 3 = 5Hz, 6P 6 = 6Hz, 6P = Bare Shaft Material Codes & Options Code Impeller Casing Shaft 1 Cast Iron Cast Iron SS431 2 Bronze Cast Iron SS431 3 34SS Cast Iron SS431 4 316SS Cast Iron SS431 Discharge Port Diameter (mm) eg: 4 = 4mm 125 = 125mm Impeller Trim 1 = 16mm 4 = 315mm 2 = 2mm 5 = 4mm 3 = 25mm 6 = 5mm Product Line ISO 3

ISO 2858 Motor Pumps, 2 pole, 5 Hz Ordering Information Pump Type Suction mm Discharge mm Impeller Nominal mm Motor kw Motor frame Pump Build number Order number 5 x32-16 5 32 16 3 1L ISO13221221 91531-3 5 x32-16 5 32 16 4 112M ISO13221231 91531-4 5 x32-16 5 32 16 5.5 132S ISO13221241 91531-5 5 x32-2 5 32 2 5.5 132S ISO23221241 91532-5 5 x32-2 5 32 2 7.5 132M ISO23221251 91532-7 5 x32-2 5 32 2 11 16M ISO23221261 91532-11 65 x 5-16 65 5 16 4 112M ISO1521231 91533-4 65 x 5-16 65 5 16 5.5 132S ISO1521241 91533-5 65 x 5-16 65 5 16 7.5 132M ISO1521251 91533-7 65 x 4-2 65 4 2 7.5 132M ISO2421251 91534-7 65 x 4-2 65 4 2 11 16M ISO2421261 91534-11 65 x 4-2 65 4 2 15 16M ISO2421271 91534-15 65 x 4-25 65 4 25 11 16M ISO3421261 91535-11 65 x 4-25 65 4 25 15 16M ISO3421271 91535-15 65 x 4-25 65 4 25 18.5 16L ISO3421291 91535-18 65 x 4-25 65 4 25 22 18M ISO3421211 91535-22 65 x 4-25 65 4 25 3 2L ISO34212111 91535-3 65 x 4-315 65 4 315 22 18M ISO4421211 91536-22 65 x 4-315 65 4 315 3 2L ISO44212111 91536-3 65 x 4-315 65 4 315 37 2L ISO44212121 91536-37 65 x 4-315 65 4 315 45 225S/M ISO44212131 91536-45 8 x 65-16 8 65 16 5.5 132S ISO16521241 91537-5 8 x 65-16 8 65 16 7.5 132M ISO16521251 91537-7 8 x 65-16 8 65 16 11 16M ISO16521261 91537-11 8 x 65-16 8 65 16 15 16M ISO16521271 91537-15 8 x 5-2 8 5 2 11 16M ISO2521261 91538-11 8 x 5-2 8 5 2 15 16M ISO2521271 91538-15 8 x 5-2 8 5 2 18.5 16L ISO2521291 91538-18 8 x 5-2 8 5 2 22 18M ISO2521211 91538-22 8 x 5-25 8 5 25 22 18M ISO3521211 91539-22 8 x 5-25 8 5 25 3 2L ISO35212111 91539-3 8 x 5-25 8 5 25 37 2L ISO35212121 91539-37 8 x 5-25 8 5 25 45 225S/M ISO35212131 91539-45 4

ISO 2858 Motor Pumps, 2 pole, 5 Hz Ordering Information continued Pump Type Suction mm Discharge mm Impeller Nominal mm Motor kw Motor frame Pump Build number Order number 8 x 5-315 8 5 315 3 2L ISO45212111 91531-3 8 x 5-315 8 5 315 37 2L ISO45212121 91531-37 8 x 5-315 8 5 315 45 225S/M ISO45212131 91531-45 8 x 5-315 8 5 315 55 25S ISO45212141 91531-55 8 x 5-315 8 5 315 75 25M ISO45212151 91531-75 1 x 8-16 1 8 16 11 16M ISO1821261 915311-11 1 x 8-16 1 8 16 15 16M ISO1821271 915311-15 1 x 8-16 1 8 16 18.5 16L ISO1821291 915311-18 1 x 65-2 1 65 2 18.5 16L ISO26521291 915312-18 1 x 65-2 1 65 2 22 18M ISO26521211 915312-22 1 x 65-2 1 65 2 3 2L ISO265212111 915312-3 1 x 65-2 1 65 2 37 2L ISO265212121 915312-37 1 x 65-25 1 65 25 3 2L ISO365212111 915313-3 1 x 65-25 1 65 25 37 2L ISO365212121 915313-37 1 x 65-25 1 65 25 45 225S/M ISO365212131 915313-45 1 x 65-25 1 65 25 55 25S ISO365212141 915313-55 1 x 65-25 1 65 25 75 25M ISO365212151 915313-75 1 x 65-315 1 65 315 55 25S ISO465212141 915314-55 1 x 65-315 1 65 315 75 25M ISO465212151 915314-75 1 x 65-315 1 65 315 9 28S ISO465212161 915314-9 1 x 65-315 1 65 315 11 28M ISO465212171 915314-11 125 x 1-2 125 1 2 3 2L ISO21212111 915316-3 125 x 1-2 125 1 2 37 2L ISO21212121 915316-37 125 x 1-2 125 1 2 45 225S/M ISO21212131 915316-45 125 x 1-2 125 1 2 55 25S ISO21212141 915316-55 125 x 1-2 125 1 2 75 25M ISO21212151 915316-75 125 x 1-25 125 1 25 55 25S ISO31212141 915317-55 125 x 1-25 125 1 25 75 25M ISO31212151 915317-75 125 x 1-25 125 1 25 9 28S ISO31212161 915317-9 125 x 1-25 125 1 25 11 28M ISO31212171 915317-11 125 x 1-315 125 1 315 9 28S ISO41212161 915318-9 125 x 1-315 125 1 315 11 28M ISO41212171 915318-11 5

ISO 2858 Bare Shaft Pumps Ordering Information Pump Type Suction mm Discharge mm Impeller Nominal mm Pump Build number Order number 5 x32-16 5 32 16 ISO132221 91531 5 x32-2 5 32 2 ISO232221 91532 65 x 5-16 65 5 16 ISO15221 91533 65 x 4-2 65 4 2 ISO24221 91534 65 x 4-25 65 4 25 ISO34221 91535 65 x 4-315 65 4 315 ISO44221 91536 8 x 65-16 8 65 16 ISO165221 91537 8 x 5-2 8 5 2 ISO25221 91538 8 x 5-25 8 5 25 ISO35221 91539 8 x 5-315 8 5 315 ISO45221 91531 1 x 65-2 1 65 2 ISO265221 915312 1 x 65-25 1 65 25 ISO365221 915313 1 x 65-315 1 65 315 ISO465221 915314 1 x 8-16 1 8 16 ISO18221 9153145 125 x 8-4 125 8 4 ISO58221 915315 125 x 1-2 125 1 2 ISO21221 915316 125 x 1-25 125 1 25 ISO31221 915317 125 x 1-315 125 1 315 ISO41221 915318 125 x 1-4 125 1 4 ISO51221 915319 15 x 125-25 15 125 25 ISO3125221 915321 15 x 125-315 15 125 315 ISO4125221 915322 15 x 125-4 15 125 4 ISO5125221 915323 2 x 15-315 2 15 315 ISO415221 915325 2 x 15-4 2 15 4 ISO515221 915326 2 x 15-5 2 15 5 ISO615221 915327 25 x 2-315 25 2 315 ISO42221 915328 25 x 2-4 25 2 4 ISO52221 915329 25 x 25-4 25 25 4 ISO525221 91533 6

Material Specifications Standard construction Component Material Specification Casing Grey Cast Iron AS183 T22-T26 Impeller Bronze AS1565 C925 Seal Plate CMA1 AS1565 C9571 Bearing Housing Grey Cast Iron AS183 T22-T26 Shaft Martensitic Stainless Steel AS2837-431 Impeller Nut Austenitic Stainless Steel AS274/H6B 316SS Impeller Key Duplex Stainless Steel ASTM 225 Fastners Zinc Plated Carbon Steel AS111/AS1112 Gr 8.8 Optional Material Specifications Component Material Specification Casing Casing Wear Ring Ductile Iron 316SS Duplex SS Leaded Bronze Phosphor Bronze Aluminium Bronze Martensitic Stainless Steel Austenitic Stainless Steel Bronze AS1831/4-12 AS274/H6B CD4MCu AS1565 C935 AS1565 C981 AS1565 C9581 ASTM A743 Gr CA-4 AS274 H6B AS1565 C9261 Impeller 316 Stainless Steel AS274/H6B Cast Iron AS183/T26 Shaft 316 Stainless Steel AS274/H6B 7

ISO 2858 Series Pump Performance Data Tombstone Curves Tombstone Curves USGPM 5 1 15 25 5 1 15 25 5 29 rpm 145 rpm TOTAL HEAD IN METRES TOTAL HEAD IN METRES 1 8 6 5 4 3 2 1 8 6 5 2 15 1 8 6 5 4 3 IGPM 5 l/sec m 3 /hr 1 USGPM 145 rpm (Nominal speed) IGPM 65x4-315 65x4-25 5x32 1x65-2 65x4 8x5-2 -2-2 125x1 4-2 3 5x32-16 3 4 5 29 rpm (Nominal speed) 5 5x32-2 5x32-16 65x5-16 5 6 2 65x4-315 65x4-25 1 1 8 3 1 1 15 8x5-315 8x5-25 8x65-16 125x8-4 VOLUMETRIC FLOW RATE 15 5 15 65x4-2 65x5-16 25 5 1x65-315 1x65-25 1x8-16 2 125x1-5 1 25 5 25 8x5-315 8x5-25 8x5-2 8x65-16 125x1-4 125x1-315 125x1-25 3 4 5 15 5 1 7 25 1x65-315 1x65-25 1x65-2 1x8-16 15x 125-5 15x 125-4 15x 125-315 15x125-25 15 1 1 2 x15-5 2 x15-4 2 x15-315 5 1 15 125x1-315 125x1-25 125x1-2 25 25 x2-315 2 15 15 15 x125-25 3 1 4 3 2 1 5 2 15 6 5 4 3 2 15 1 TOTAL HEAD IN FEET TOTAL HEAD IN FEET 2 15 l/sec 3 4 5 6 8 1 2 3 4 5 7 1 5 15 m 3 /hr 1 2 3 5 1 VOLUMETRIC FLOW RATE 15 25 5 8

Performance Curve: 5 x 32-16 16. 14. 146mm 182mm 1 12. 3% 4% 45% 5% 1. 8. 6. 182 173 164 155 146.25KW 52% 54% 56% 57% 57% 56% 54% 52% 5% 45%.55KW 4. 2..37KW.. 1. 2. 3. 4. 5. 6. 7. 8. PUMP SIZE & TYPE: 5 x 32-16 RPM: 143 8. 7. 146mm 182mm 1 MILLIMETERS 6. 3% 4% 5% 55% 58% 6% 61% 62% 5. 4. 3. 182 173 164 155 146 62.5% 62.5% 62% 4.KW 61% 2. 2.2KW 3.KW 1.. 1 2 3 4 5 6 7 8 9 1 PUMP SIZE & TYPE: 5 x 32-16 RPM: 29 9

Performance Curve: 5 x 32-2 25. 2. 15. 1. 228 217 25 194 182 182mm 3% 4% 45% 48% 5%51% 52% 52.5% 52.5% 52% 51% 5% 1.1KW 228mm 1.55KW.75KW 5.. 1 2 3 4 5 6 7 8 PUMP SIZE & TYPE: 5 x 32-2 RPM: 145 9 8 182mm 3% 4% 45% 5% 52% 228mm 1 228 54% 55% 7 217 55.5% 55.5% 55% 6 25 5 4 3 194 182 4KW 5.5KW 7.5KW 2 1 1 2 3 4 5 6 7 8 9 1 11 12 PUMP SIZE & TYPE: 5 x 32-2 RPM: 296 1

Performance Curve: 65 x 5-16 16. 1 14. 182mm MILLIMETERS 12. 1. 8. 6. 182 173 164 155 146 3% 4% 5% 55% 6% 62% 63% 63% 62% 6% 55% 5% 4..37KW.75KW.55KW 2.. 1 2 3 4 5 6 7 8 9 1 PUMP SIZE & TYPE: 65 x 5-16 RPM: 14 7. 182mm DIA 1 6. 146mm DIA 5. 4. 3. 2. 182 173 164 155 146 55% 6% 64% 67% 69% 7% 71% 7% 69% 67% 64% 5.5KW 6% 4KW 3KW 1... 2. 4. 6. 8. 1. 12. 14. 16. PUMP SIZE & TYPE: 65 x 5-16 RPM: 29 11

Performance Curve: 65 x 4-2 3. 182mm 1 25. MILLIMETERS 228mm 2. 15. 1. 228 217 25 194 182 4% 5% 55% 58% 6% 62% 63% 63% 62% 6% 58% 1.5KW 1.1KW 5..75KW. 1 2 3 4 5 6 7 8 9 1 PUMP SIZE & TYPE: 65 x 4-2 RPM: 142 1. 9. 182mm 228mm 1 8. 4% 5% 55% 6% 62% 64% 228 65% 66% 7. 217 66% 6. 5. 4. 25 194 18 65% 64% 11KW 3. 5.5KW 7.5KW 2. 1... 2. 4. 6. 8. 1. 12. 14. 16. PUMP SIZE & TYPE: 65 x 4-2 RPM: 292 12

Performance Curve: 65 x 4-25 35. 222mm 1 3. 278mm 25. 2. 15. 278 264 25 236 222 4% 3% 45% 48% 5% 1.1KW 52% 53% 53.5% 53.5% 53% 52% 2.2KW 1. 1.5KW 5... 1. 2. 3. 4. 5. 6. 7. 8. PUMP SIZE & TYPE: 65 x 4-25 RPM: 142 13. 12. 11. 1. 9. 278 264 25 3% 4% 45% 5% 52% 54% 55% 56% 56.5% 56.5% 56% 8. 7. 6. 5. 236 222 7.5KW 11KW 15KW 18.5KW 4. 3. 2. 1. 222mm DIA 278mm DIA 1.. 2. 4. 6. 8. 1. 12. 14. PUMP SIZE & TYPE: 65 x 4-25 RPM: 293 13

Performance Curve: 65 x 4-315 5. 1 45. 228mm POWER 342mm 4. 342 2% 3% 35% 4% 43% 45% 46% 47% 35. 3. 25. 2. 15. 325 38 291 274 MILLIMETERS 2.2KW 3.KW 47% 46% 45% 4.KW 1. 5.. 1 2 3 4 5 6 7 8 9 1 PUMP SIZE & TYPE: 65 x 4-315 RPM: 144 2. 18. 2% 3% 35% 4% 16. 342 43% 45% 46% 47% 48% 49% 14. 325 38 49% 48% 47% 12. 1. 8. 291 274 18.5KW 22KW 37KW 3KW 6. 4. 2. 222mm DIA 278mm DIA.. 2. 4. 6. 8. 1. 12. 14. 16. 1 PUMP SIZE & TYPE: 65 x 4-315 RPM: 294 14

Performance Curve: 8 x 65-16 14. 182mm DIA 1 12. 182 4% 5% 6% 65% 7% 74% 1. 173 77% 77% 164 74% 8. 6. 155 146.55KW 7% 65% 1.1KW 4. 2..75KW.. 2. 4. 6. 8. 1. 12. 14. 16. PUMP SIZE & TYPE: 8 x 65-16 RPM: 145 6. 146mm DIA 182mm DIA 1 5. 182 173 76% 78% 8% 8.5% 8.5% 4. 3. 2. 164 155 146 4KW 8% 78% 11KW 65% 7.5KW 5.5KW 1... 5. 1. 15. 2. 25. 3. 35. 4. PUMP SIZE & TYPE: 8 x 65-16 RPM: 296 15

Performance Curve: 8 x 5-2 3. 182mm DIA 1 25. 228mm DIA 2. 15. 1. 228 217 25 194 182 4% 5% 6% 64% 68% 7% 71% 71% 7% 68% 2.2KW 1.1KW 1.5KW 5... 2. 4. 6. 8. 1. 12. 14. PUMP SIZE & TYPE: 8 x 5-2 RPM: 146 1. 9. 182mm NPSHR 228mm 1 8. 228 4% 5% 6% 65% 7% 1 72% 74% 7. 6. 5. 4. 217 25 194 182 7.5KW 75% 75% 74% 72% 18.5KW 15KW 3. 11KW 2. 1.. 5 1 15 2 25 3 35 4 PUMP SIZE & TYPE: 8 x 5-2 RPM: 296 16

Performance Curve: 8 x 5-25 35. 3. 25. 2. 15. 1. 278 264 25 236 222 278 264 25 236 222 222mm 222mm DIA 4% 5% 55% 6% 7% MILLIMETERS 63% 75% 78% 66% 8% 67% 81% 2.2KW 45KW 278mm DIA 278mm 67% 81% 66% 8% 63% 78% 6% 55% 11KW 9KW4KW 75KW 3KW 1 55KW 5... 2. 4. 6. 8. 1. 12. 14. 16. 18. 2. 22 PUMP SIZE & TYPE: 8 x 5-25 RPM: 147 13. 12. 11. 1. 9. 278 264 4% 5% 55% 6% 63% 65% 68% 68.8% 68.8% 68% 67% 65% 8. 7. 6. 5. 236 222 15KW 22KW 3KW 37KW 4. 3. 2. 1. 278mm DIA 222mm DIA.. 5. 1. 15. 2. 25. 3. 35. 1 PUMP SIZE & TYPE: 8 x 5-25 RPM: 297 17

Performance Curve: 8 x 5-315 5. 278mm 1 4. 342 325 3% 4% 45% 5% 53% 55% 57% 58% 58% 57% 342mm 3. 2. 38 291 274 3KW 5.5KW 55% 7.5KW 4KW 1... 2. 4. 6. 8. 1. 12. 14. 16. 22. 2. 274mm DIA 342mm DIA 1 58% 59% 6% PUMP SIZE & TYPE: 8 x 5-315 RPM: 147 18. 342 3% 4% 45% 5% 53% 56% 16. 325 14. 12. 1. 8. 38 291 274 22KW 3KW 6% 59% 58% 55KW 45KW 37KW 6. 4. 2... 5. 1. 15. 2. 25. 3. PUMP SIZE & TYPE: 8 x 5-315 RPM: 297 18

Performance Curve: 1 x 8-16 14. 182mm DIA 1 12. 182 4% 5% 6% 65% 7% 74% 1. 173 77% 77% 164 74% 8. 6. 155 146.55KW 7% 65% 1.1KW 4. 2..75KW.. 2. 4. 6. 8. 1. 12. 14. 16. PUMP SIZE & TYPE: 1 x 8-16 RPM: 142 6. 146mm DIA 182mm DIA 1 5. 182 173 76% 78% 8% 8.5% 8.5% 4. 3. 2. 164 155 146 4KW 8% 78% 11KW 65% 7.5KW 5.5KW 1... 5. 1. 15. 2. 25. 3. 35. 4. PUMP SIZE & TYPE: 1 x 8-16 RPM: 292 19

Performance Curve: 1 x 65-2 25. 1 NPSHR 182mm 228mm 2. 15. 1. 228 217 25 194 182 5% 6% 65% 1.5KW 7% 74% 79% 78% 74% 7% 65% 4KW 3KW 5. 2.2KW. 5 1 15 2 25 3 35 4 PUMP SIZE & TYPE: 1 x 65-2 RPM: 142 1. 9. 182mm 228mm 1 8. 7. 228 217 4% 5% 6% 7% 75% 79% 8% 6. 5. 4. 25 194 182 8% 79% 3KW 22KW 75% 3. 15KW 18.5KW 2. 1... 1. 2. 3. 4. 5. 6. 7. PUMP SIZE & TYPE: 1 x 65-2 RPM: 293 2

Performance Curve: 1 x 65-25 4. 222mm NPSHR 278mm 1 35. 3. 278 4% 5% 6% 65% 7% 73% 75% 76% 77% 25. 2. 15. 264 25 236 222 3KW 77% 76% 4KW 75% 5.5KW 73% 7.5KW 1. 5.. 5 1 15 2 25 3 35 PUMP SIZE & TYPE: 1 x 65-25 RPM: 145 14. 12. 4% 5% 6% 65% 7% NPSHR 222mm 278mm 1 1. 278 264 25 75% 77% 78% 79% 79% 78% 77% 8. 6. 236 222 22KW 3KW 37KW 45KW 55KW 4. 2.. 1 2 3 4 5 6 PUMP SIZE & TYPE: 1 x 65-25 RPM: 295 21

Performance Curve: 1 x 65-315 6. 1 5. 4% 5% 55% 6% 62% 64% 4. 342 65% 3. 325 38 291 274 65% 64% 62% 6% 2. 11KW 5.5KW 7.5KW 1.. 5 1 15 2 25 3 35 4 PUMP SIZE & TYPE: 1 x 65-315 RPM: 145 2. 18. 274mm 342mm NPSHR 1 4% 5% 55% 6% 63% 16. 14. 342 325 38 66% 67% 68% 68% 67% 66% 12. 1. 8. 6. 291 274 9KW 55KW 75KW 4. 2.. 1 2 3 4 5 6 PUMP SIZE & TYPE: 1 x 65-315 RPM: 295 22

Performance Curve: 125 x 1-2 25. 1 NPSHR 228mm 2. 228 217 75% 8% 82% 84% 15. 1. 25 194 182 84% 82% 8% 75% 5.5KW 5. 3KW 4KW. 1 2 3 4 5 6 PUMP SIZE & TYPE: 125 x 1-2 RPM: 144 1. 1 9. 182mm POWER 228mm 8. 6% 7% 75% 7. 228 217 8% 82% 84% 85% 6. 5. 4. 25 194 182 85% 84% 82% 8% 55KW 45KW 3. 22KW 37KW 3KW 2. 1.. 1 2 3 4 5 6 7 8 9 1 PUMP SIZE & TYPE: 125 x 1-2 RPM: 295 23

Performance Curve: 125 x 1-25 4. 1 35. 222m 278mm 3. 25. 2. 15. 278 264 25 236 222 6% 7% 75% 78% 8% 81% 8% 78% 75% 7% 6% 1. 5.5KW 11KW 7.5KW 5.. 1 2 3 4 5 6 7 PUMP SIZE & TYPE: 125 x 1-25 RPM: 145 14. 222mm DIA 278mm DIA 1 12. 1. 8. 6. 278 264 25 236 222 7% 75% 78% 8% 81% 81% 8% 78% 11KW 9KW 75KW 4. 45KW 55KW 2.. 2 4 6 8 1 12 14 16 PUMP SIZE & TYPE: 125 x 1-25 RPM: 296 24

Performance Curve: 125 x 1-315 6. 1 274mm NPSHR 342mm 5. 4. 3. 342 325 38 291 274 7% 73% 75% 77% 78% 78% 77% 75% 73% 18.5KW 2. 15KW 11KW 1.. 1 2 3 4 5 6 PUMP SIZE & TYPE: 125 x 1-315 RPM: 146 2. 18. 16. 342 325 5% 6% 7% 75% 77% 78% 79% 14. 38 79% 78% 77% 12. 1. 8. 291 274 9KW 132KW 15KW 11KW 6. 4. 2.. 274mm 342mm 2 4 6 8 1 12 1 PUMP SIZE & TYPE: 125 x 1-315 RPM: 296 25

Performance Curve: 125 x 1-4 1. 1 8. 6. 4. 438 416 394 372 35 4% 5% 6% 65% 67% 68% 69% 7% 7% 69% 68% 67% 37KW 3KW 22KW 2.. 1 2 3 4 5 6 7 8 PUMP SIZE & TYPE: 125 x 1-4 RPM: 147 26

Performance Curve: 15 x 125-25 4. 35. NPSHR 222mm 278mm 1 3. 25. 2. 15. 278 264 25 236 222 5% 6% 7% 75% 8% 82% 84% 85% 85% 84% 82% 8% 75% 7% 1. 15KW 18.5KW 5. 11KW. 2 4 6 8 1 PUMP SIZE & TYPE: 15 x 125-25 RPM: 146 14. 12. 1. 8. 6. 278 264 25 236 222 NPSHR 222mm 7% 75% 8% 83% 85% 278mm 85% 132KW 11KW 83% 8% 15KW 1 5 9KW 4. 2.. 2 4 6 8 1 12 14 16 18 PUMP SIZE & TYPE: 15 x 125-25 RPM: 296 27

Performance Curve: 15 x 125-315 5. 45. 4. 342 274mm 5% 6% 7% 75% 8% 83% 342mm 5 35. 325 38 83% 8% 3. 25. 2. 15. 291 274 75% 7% 3KW 22KW 1. 18.5KW 5... 2. 4. 6. 8. 1. 12. PUMP SIZE & TYPE: 15 x 125-315 RPM: 146 2. 18. 16. 325 NPSHR 8% 83% 84% 1 14. 12. 1. 8. 38 291 274 26 84% 83% 8% 22KW 185KW 15KW 6. 11KW 4. 2.. 2 4 6 8 1 12 14 16 PUMP SIZE & TYPE: 15 x 125-315 RPM: 296 28

Performance Curve: 15 x 125-4 1. 1 438mm DIA 8. 438 5% 6% 7% 75% 78% 79% 6. 4. 416 394 372 35 79% 78% 75% 7% 55KW 45KW 37KW 2.. 2 4 6 8 1 12 PUMP SIZE & TYPE: 15 x 125-4 RPM: 147 29

Performance Curve: 15 x 125-5 14. 1 12. 1. 547 527 447 51% 57% 61.5% 63.5% 65% 547 8. 6. 4. 57 487 467 447 3KW 37KW 45KW 55KW 63.5% 61.5% 57% 51% 41% 11KW 9KW 2. 75KW. 2 4 6 8 1 12 14 16 PUMP SIZE & TYPE: 15 x 125-5 RPM: 1475 3

Performance Curve: 125 x 8-4 11. 1 1. 9. 35mm 438mm 8. 7. 6. 5. 438 416 394 372 5% 55% 57% 59% 6% 61% 62% 62% 61% 6% 59% 4. 35 22KW 3. 18.5KW 15KW 2. 1. 5 1 15 2 25 3 35 4 PUMP SIZE & TYPE: 125 x 8-4 RPM: 146 3. 425 5% 58% 425mm DIA 1 25. 62% 4 66% 2. 375 35 64% 185KW 15KW 15. 132KW 11KW 1.. 1. 2. 3. 4. 5. 6. 7. PUMP SIZE & TYPE: 125 x 8-4 SHD RPM: 297 31

Performance Curve: 2 x 15-315 5. 1 342mm DIA 4. 3. 2. 342 33 318 36 294 282 65% 7% 22KW 75% 8% 81% 81% 8% 75% 37KW 45KW 3KW 1... 2. 4. 6. 8. 1. 12. 14. 16. PUMP SIZE & TYPE: 2 x 15-315 RPM: 148 32

Performance Curve: 2 x 15-4 9. 1 8. 7. 6. 5. 4. 438 425 41 398 378 363 NPSHR 5% 6% 7% 74% 45KW 78% 8% 82% 83% 438mm 83% 82% 8% 78% 9KW 75KW NPSH- R 3. 55KW 2. 1.. 2 4 6 8 1 12 14 16 Performance Curve: 25 x 25-4 PUMP SIZE & TYPE: 2 x 15-4 RPM: 1475 8. 41mm IMP 15 1 7. 5 6. 41 72% 81% 84% 86% 87% 5. 4. 3. 2. 1. 369 328 87% 86% 84% 81% 132KW 11KW 9KW 75KW 55KW.. 5. 1. 15. 2. 25. 3. 35. 4. PUMP SIZE & TYPE: 25 x 25-4 RPM: 148 33

Frame Mount Dump Dimensions 45. 45. 22.5 45. a 22.5 f DISCHARGE: AS2129 "E" l S2Ø x 2 m2 ctr's m1 h2 45. 22.5 45. 45. 22.5 h1 SUCTION: AS2129 "E" dø KEY SIZE w S1Ø x 4 n3 ctr's n2 ctr's n1 b 34

Frame Mount Dump Dimensions Size Designation Pump Support Mounting Shaft Inlet Outlet Impeller a f hi h2 b m1 m2 n1 n2 n3 w S1 S2 d I 5 32 16 8 385 132 16 5 1 7 24 19 11 285 M12 M12 24 5 5 32 2 8 385 16 18 5 1 7 24 19 11 285 M12 M12 24 5 5 32 25 1 5 18 225 65 125 95 32 25 11 37 M12 M12 32 8 65 5 16 8 385 132 16 5 1 7 24 19 11 285 M12 M12 24 5 65 4 2 1 385 16 18 5 1 7 265 212 11 285 M12 M12 24 5 65 4 25 11 5 18 225 65 125 95 32 25 11 37 M12 M12 32 8 65 4 315 125 5 2 25 65 125 95 345 28 11 37 M12 M12 32 8 8 65 16 1 385 16 18 5 1 7 265 212 11 285 M12 M12 24 5 8 5 2 1 385 16 2 5 1 7 265 212 11 285 M12 M12 24 5 8 5 25 125 5 18 225 65 125 95 32 25 11 37 M12 M12 32 8 8 5 315 125 5 225 28 65 125 95 345 28 11 37 M12 M12 32 8 1 8 16 1 5 16 2 65 125 95 28 212 11 37 M12 M12 32 8 1 65 2 1 5 18 225 65 125 95 32 25 11 37 M12 M12 32 8 1 65 25 125 5 2 25 8 16 12 36 28 11 37 M16 M12 32 8 1 65 315 125 53 225 28 8 16 12 4 315 11 37 M16 M12 42 11 125 8 4 125 53 28 355 8 16 12 435 355 11 37 M16 M12 42 11 125 1 2 125 5 2 28 8 16 12 36 28 11 37 M16 M12 32 8 125 1 25 14 53 225 28 8 16 12 4 315 11 37 M16 M12 42 11 125 1 315 14 53 25 315 8 16 12 4 315 11 37 M16 M12 42 11 125 1 4 14 53 28 355 1 2 15 5 4 11 37 M2 M12 42 11 15 125 25 14 53 25 355 8 16 12 4 315 11 37 M16 M12 42 11 15 125 315 14 53 28 355 1 2 15 5 4 11 37 M2 M12 42 11 15 125 4 14 53 315 4 1 2 15 5 4 11 37 M2 M12 42 11 2 15 25 16 53 28 375 1 2 15 5 4 11 37 M2 M12 42 11 2 15 315 16 67 315 4 1 2 15 55 45 14 5 M2 M16 48 11 2 15 4 16 67 315 45 1 2 15 55 45 14 5 M2 M16 48 11 25 2 315 18 67 315 45 1 2 15 55 45 14 5 M2 M16 48 11 25 25 4 18 67 315 45 1 2 15 55 45 14 5 M2 M16 48 11 Remarks: 1. Standard flange drilling to AS2129-1982 Table "E" 2. Other Drilling options are available on request 3. Dimension are in mm 35

Frame Mount Shaft Dimensions B A F H G Ø E Shaft Module 1 24 2 32 3 42 4 48 Dimension 'E' Key Width 'H' Key Width 'F' Key Width 'G' Diameter Tolerance Diamension Tolerance +.15 8 7 2 +.2 -.2 +.18 1 8 27 +.2 -.2 +.18 12 8 37 +.2 -.2 +.18 14 9 42.5 +.2 -.2 Key Length 'A' Shaft Extension 'B' 32 5 5 8 8 11 8 11 36

ISO Bare Shaft Pump Parts Description Item Description 2 Bearing Cap (Rear) 3 Bearing Cap (Front) 4 Mechanical Seal 6 Fastener Set 7 Volute (Casing) 1 Impeller Key - Woodruff 11 Impeller Nut 12A O-Ring 13 Impeller 19 Shaft DC 1 Bearing Housing 39 Intermediate Cover Item Description 5 Impeller Washer 51A 51B Oil Seal - Front Oil Seal - Rear 52 Bearing - Ball 53 Support Foot 54 Shaft Key - Input Drive 45 Wear-ring Casing Front (Option) 46 Wear-ring Intermediate cover Rear (Option) 47 & 48 Wear-ring Impeller Front & Rear (Option) 64 Plugs - Casing Drain 64A Plugs - Casing Suct & Disch 37

Close Coupled Motor Pumps Dimensions G O M H F J K L P N Q B R A S E C D 38

ISO Close Coupled Motor Pump Dimensions (4 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 52x32-16 1.55 8 16 132 19 24 15 7 8 45 223 228 1 1 86 459 236 145 8 125 47.75 8 16 132 19 24 15 7 8 45 223 228 1 1 86 459 236 145 8 125 47 5x32-2 1.75 8 18 16 19 24 15 7 8 45 223 228 1 1 86 459 236 145 8 125 56 1.1 9S 18 16 19 24 15 7 8 45 233 244 1 1 1 489 256 155 9 14 64 1.5 9L 18 16 19 24 15 7 8 45 233 244 125 1 98 512 279 155 9 14 7 65x5-16 1.55 8 16 132 19 24 15 7 8 45 223 228 1 1 86 459 236 145 8 125 49.75 8 16 132 19 24 15 7 8 45 223 228 1 1 86 459 236 145 8 125 49 1.1 9S 16 132 19 24 15 7 8 45 233 244 1 1 1 489 256 155 9 14 57 65x4-2 1 1.1 9S 18 16 212 265 15 7 1 65 253 244 1 1 1 59 256 155 9 14 65 1.5 9L 18 16 212 265 15 7 1 65 253 244 125 1 98 532 279 155 9 14 66 2.2 1L 18 16 212 265 15 7 1 65 263 261 14 12 113 579 316 165 1 16 77 3 1L 18 16 212 265 15 7 1 65 263 261 14 12 113 579 316 165 1 16 77 65x4-25 2 1.1 9S 225 18 25 32 15 95 1 52 258.5 262.5 1 1 1 515 256 155 9 14 86 1.5 9L 225 18 25 32 15 95 1 52.5 259 262.5 125 1 98 538 279 155 9 14 87 2.2 1L 225 18 25 32 15 95 1 52.5 269 279.5 14 12 113 585 316 165 1 16 97 3 1L 225 18 25 32 15 95 1 52.5 269 279.5 14 12 113 585 316 165 1 16 11 4 112 225 18 25 32 15 95 1 52.5 269 286.5 14 12 124 63 334 165 112 19 115 5.5 132S 225 18 25 32 15 95 1 52.5 292 328.5 14 12 143 664 372 218 132 216 13 65x4-315 2 2.2 1L 25 2 28 345 15 95 125 77.5 292 277.5 14 12 113 68 316 165 1 16 18 3 1L 25 2 28 345 15 95 125 77.5 292 277.5 14 12 113 68 316 165 1 16 112 4 112 25 2 28 345 15 95 125 77.5 292 284.5 14 12 124 626 334 19 112 19 126 5.5 132S 25 2 28 345 15 95 125 77.5 315 326.5 14 12 143 687 372 218 132 216 143 7.5 132M 25 2 28 345 15 95 125 77.5 315 326.5 178 12 143 725 41 218 132 216 151 8X65-16 1.75 8 18 16 212 265 15 7 1 65 243 228 1 1 86 479 236 145 8 125 52 1.1 9S 18 16 212 265 15 7 1 65 253 244 1 1 1 59 256 155 9 14 64 1.5 9L 18 16 212 265 15 7 1 65 253 244 125 1 98 532 279 155 9 14 65 8x5-2 1 1.5 9L 2 16 212 265 15 7 1 65 253 244 125 1 98 532 279 155 9 14 69 2.2 1L 2 16 212 265 15 7 1 65 263 261 14 12 113 579 316 165 1 16 79 3 1L 2 16 212 265 15 7 1 65 263 261 14 12 113 579 316 165 1 16 83 8x5-25 2 2.2 1L 225 18 25 32 15 95 125 77.5 295 28.5 14 12 113 611 316 165 1 16 99 3 1L 225 18 25 32 15 95 125 77.5 295 28.5 14 12 113 611 316 165 1 16 13 4 112M 225 18 25 32 15 95 125 77.5 295 287.5 14 12 124 629 334 19 112 19 116 5.5 132S 225 18 25 32 15 95 125 77.5 318 329.5 14 12 143 69 372 218 132 216 132 8x5-315 2 4 112M 28 225 28 345 15 95 125 77.5 291 334 14 12 124 625 222 19 112 19 129 39

ISO Close Coupled Motor Pump Dimensions (4 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 5.5 132S 28 225 28 345 15 95 125 77.5 314 325.5 14 12 143 686 372 218 132 216 146 7.5 132M 28 225 28 345 15 95 125 77.5 314 325.5 178 12 15 731 417 218 132 216 154 11 16M 28 225 28 345 15 95 125 77.5 349 379.5 21 14.5 168 835 486 256 16 254 196 15 16L 28 225 28 345 15 95 125 77.5 349 379.5 254 14.5 17 881 532 256 16 254 27 1x8-16 2 1.1 9S 2 16 212 28 15 95 1 52.5 257 26.5 1 1 1 513 256 155 9 14 85 1.5 9L 2 16 212 28 15 95 1 52.5 257 26.5 125 1 98 536 279 155 9 14 86 2.2 1L 2 16 212 28 15 95 1 52.5 235 277.5 14 12 113 583 316 165 1 16 96 3 1L 2 16 212 28 15 95 1 52.5 235 277.5 14 12 113 583 316 165 1 16 1 4 112M 2 16 212 28 15 95 1 52.5 267 284.5 14 12 124 61 334 19 112 19 114 1x65-2 2 2.2 1L 225 18 25 32 15 95 1 52.5 266.5 277 14 12 113 582.5 316 165 1 16 96 3 1L 225 18 25 32 15 95 1 52.5 266.5 277 14 12 113 582.5 316 165 1 16 1 4 112M 225 18 25 32 15 95 1 52.5 266.5 284 14 12 124 6.5 334 19 112 19 113 5.5 132S 225 18 25 32 15 95 1 52.5 289.5 326 14 12 143 661.5 372 218 132 216 128 1x65-25 2 2.2 1L 25 2 28 36 18 12 125 65 291 289 14 12 113 67 316 165 1 16 13 3 1L 25 2 28 36 18 12 125 65 291 289 14 12 113 67 316 165 1 16 17 4 112M 25 2 28 36 18 12 125 65 291 296 14 12 124 625 334 19 112 19 115 5.5 132S 25 2 28 36 18 12 125 65 314 338 14 12 143 686 372 218 132 216 131 7.5 132M 25 2 28 36 18 12 125 65 314 338 178 12 15 731 417 218 132 216 139 1x65-315 3 5.5 132S 28 225 315 4 18 12 125 65 328 352 14 12 143 7 372 218 132 216 173 7.5 132M 28 225 315 4 18 12 125 65 328 352 178 12 15 745 417 218 132 216 181 11 16M 28 225 315 4 18 12 125 65 363 46 21 14.5 168 849 486 256 16 254 225 15 16L 28 225 315 4 18 12 125 65 363 46 254 14.5 17 895 532 256 16 254 236 125x8-4 3 11 16M 355 28 355 435 18 12 125 65 365 238 21 14.5 168 851 486 256 16 254 268 15 16L 355 28 355 435 18 12 125 65 365 48 254 14.5 17 897 532 256 16 254 279 18.5 18M 355 28 355 435 18 12 125 65 365 421 241 14.5 192 919 554 276 18 254 327 22 18L 355 28 355 435 18 12 125 65 365 421 276 14.5 195 96 595 276 18 279 347 3 2L 355 28 355 435 18 12 125 65 365 433 35 18.5 219 122 657 292 2 318 46 37 225L 355 28 355 435 18 12 125 65 395 479 311 18.5 247 112 77 366 225 356 52 125x1-2 2 2.2 1L 28 2 28 36 18 12 125 65 289.5 287.5 14 12 113 65.5 316 165 1 16 16 3 1L 28 2 28 36 18 12 125 65 289.5 287.5 14 12 113 65.5 316 165 1 16 11 4 112M 28 2 28 36 18 12 125 65 289.5 294.5 14 12 124 623.5 334 19 112 19 123 5.5 132S 28 2 28 36 18 12 125 65 313 337 14 12 143 685 372 218 132 216 139 7.5 132M 28 2 28 36 18 12 125 65 313 337 178 12 15 73 417 218 132 216 147 4

ISO Close Coupled Motor Pump Dimensions (4 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 125x1-25 3 7.5 132M 28 225 315 4 18 12 14 8 344 353 178 12 15 761 417 218 132 216 189 11 16M 28 225 315 4 18 12 14 8 379 47 21 14.5 168 865 486 256 16 254 233 15 16L 28 225 315 4 18 12 14 8 379 47 254 14.5 17 911 532 256 16 254 244 18.5 18M 28 225 315 4 18 12 14 8 379 42 241 14.5 192 933 554 276 18 254 29 125x1-315 3 11 16M 315 25 315 4 18 12 14 8 38 48 21 14.5 168 866 486 256 16 254 239 15 16L 315 25 315 4 18 12 14 8 38 48 254 14.5 17 912 532 256 16 254 25 18.5 18M 315 25 315 4 18 12 14 8 38 421 241 14.5 192 934 554 276 18 254 297 22 18L 315 25 315 4 18 12 14 8 38 421 279 14.5 195 975 595 276 18 279 317 125x1-4 3 18.5 18M 355 28 4 5 24 15 14 65 38 436 241 14.5 192 934 554 276 18 254 33 22 18L 355 28 4 5 24 15 14 65 38 436 279 14.5 195 975 595 276 18 279 35 3 2L 355 28 4 5 24 15 14 65 38 448 35 18.5 219 137 657 292 2 318 41 37 225S 355 28 4 5 24 15 14 65 41 494 311 18.5 247 1117 77 366 225 356 56 45 225M 355 28 4 5 24 15 14 65 41 494 311 18.5 247 1117 77 366 225 356 56 15x125-25 3 11 16M 355 25 315 4 18 12 14 8 38 48 21 14.5 168 866 486 256 16 254 24 15 16L 355 25 315 4 18 12 14 8 38 48 254 14.5 17 912 532 256 16 254 251 18.5 18M 355 25 315 4 18 12 14 8 38 421 241 14.5 192 934 554 276 18 254 36 22 18L 355 25 315 4 18 12 14 8 38 421 279 14.5 195 975 595 276 18 279 326 3 2L 355 25 315 4 18 12 14 8 38 433 35 18.5 35 137 657 292 2 318 386 37 225M/S 355 25 315 4 18 12 14 8 42 479 311 18.5 247 1117 77 366 225 356 482 15x125-315 3 15 16L 355 28 4 5 24 15 14 65 381 424 254 14.5 17 913 532 256 16 254 255 18.5 18M 355 28 4 5 24 15 14 65 381 437 241 14.5 192 935 554 276 18 254 31 22 18L 355 28 4 5 24 15 14 65 381 437 279 14.5 195 976 595 276 18 279 33 3 2L 355 28 4 5 24 15 14 65 381 449 35 18.5 219 138 657 292 2 318 389 37 225S 355 28 4 5 24 15 14 65 411 495 311 18.5 247 1118 77 366 225 356 484 45 225M 355 28 4 5 24 15 14 65 411 495 311 18.5 247 1118 77 366 225 356 484 15x125-4 3 3 2L 4 315 4 5 24 15 14 65 38 448 35 18.5 219 137 657 292 2 318 413 37 225S 4 315 4 5 24 15 14 65 41 494 311 18.5 247 1117 77 366 225 356 484 45 225M 4 315 4 5 24 15 14 65 41 494 311 18.5 247 1117 77 366 225 356 484 Remarks: 1. Standard flange drilling to AS2129-1982 Table "E" 2. Other Drilling options are available on request 3. Dimension are in mm 4. Motor dimensions and data may vary depending on the make of the motor. 41

ISO Close Coupled Motor Pump Dimensions (2 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 5x32-16 1 3 1L 16 132 19 24 15 7 8 45 243 261 14 12 113 559 316 165 1 16 63 4 112M 16 132 19 24 15 7 8 45 243 268 14 12 124 577 334 19 112 19 78 5.5 132S 16 132 19 24 15 7 8 45 597 37 14 12 143 635 372 218 132 216 97 5x32-2 1 5.5 132S 18 16 19 24 15 7 8 45 163 37 14 12 143 635 372 218 132 216 16 7.5 132M 18 16 19 24 15 7 8 45 163 37 14 12 143 635 372 218 132 216 16 11 16M 18 16 19 24 15 7 8 45 298 361 21 14.5 168 784 486 256 16 254 148 65x5-16 1 4 112M 16 132 19 24 15 7 8 45 243 268 14 12 124 577 334 19 112 19 81 5.5 132S 16 132 19 24 15 7 8 45 263 37 14 12 143 635 372 218 132 216 1 7.5 132M 16 132 19 24 15 7 8 45 263 37 14 12 143 635 372 218 132 216 1 65x4-2 1 5.5 132S 18 16 212 265 15 7 1 65 283 37 14 12 143 655 372 218 132 216 18 7.5 132M 18 16 212 265 15 7 1 65 283 37 14 12 143 655 372 218 132 216 18 11 16M 18 16 212 265 15 7 1 65 318 361 21 14.5 168 84 486 256 16 254 149 15 16L 18 16 212 265 15 7 1 65 318 361 21 14.5 168 84 486 256 16 254 158 65x4-25 2 11 16M 225 18 25 32 15 95 1 52.5 327 382.5 21 14.5 168 813 486 256 16 254 169 15 16M 225 18 25 32 15 95 1 52.5 327 382.5 21 14.5 168 813 486 256 16 254 178 18.5 16L 225 18 25 32 15 95 1 52.5 327 382.5 254 14.5 17 859 532 256 16 254 2 22 18M 225 18 25 32 15 95 1 52.5 327 395.5 241 14.5 192 881 554 276 18 279 246 3 2L 225 18 25 32 15 95 1 52.5 327 47.5 35 18.5 219 984 657 292 225 318 32 37 2L 225 18 25 32 15 95 1 52.5 327 47.5 35 18.5 219 984 657 292 225 318 335 65x4-315 2 22 18M 25 2 28 345 15 95 125 77.5 35 393.5 241 14.5 192 94 554 276 18 279 257 3 2L 25 2 28 345 15 95 125 77.5 35 45.5 35 18.5 219 17 657 292 2 318 329 37 2L 25 2 28 345 15 95 125 77.5 35 45.5 35 18.5 219 17 657 292 2 318 344 45 225M/S 25 2 28 345 15 95 125 77.5 35 421.5 286 18.5 27 155 75 366 225 356 473 8x65-16 1 5.5 132S 18 16 212 265 15 7 1 65 283 37 14 12 143 655 372 218 132 216 16 7.5 132M 18 16 212 265 15 7 1 65 283 37 14 12 143 655 372 218 132 216 112 11 16M 18 16 212 265 15 7 1 65 318 361 21 14.5 168 84 486 256 16 254 148 15 16L 18 16 212 265 15 7 1 65 318 361 254 14.5 17 85 532 256 16 254 157 8x5-2 1 11 16M 2 16 212 265 15 7 1 65 318 361 21 14.5 168 84 486 256 16 254 149 15 16M 2 16 212 265 15 7 1 65 318 361 21 14.5 168 84 486 256 16 254 158 18.5 16L 2 16 212 265 15 7 1 65 318 361 254 14.5 17 85 532 256 16 254 18 22 18M 2 16 212 265 15 7 1 65 318 374 241 14.5 192 872 554 276 18 279 225 8x5-25 2 18.5 16L 225 18 25 32 15 95 125 77.5 353 383.5 254 14.5 17 885 532 256 16 254 24 22 18M 225 18 25 32 15 95 125 77.5 353 396.5 241 14.5 192 97 554 276 18 279 249 3 2L 225 18 25 32 15 95 125 77.5 353 48.5 35 18.5 219 11 657 292 2 318 321 42

ISO Close Coupled Motor Pump Dimensions (2 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 37 2L 225 18 25 32 15 95 125 77.5 353 48.5 35 18.5 219 11 657 292 2 318 336 45 225S/M 225 18 25 32 15 95 125 77.5 353 424.5 286 18.5 27 158 75 366 225 356 464 8x5-315 2 3 2L 28 225 28 345 15 95 125 77.5 349 44.5 35 18.5 219 16 657 292 2 318 333 37 2L 28 225 28 345 15 95 125 77.5 349 44.5 35 18.5 219 16 657 292 2 318 348 45 225S/M 28 225 28 345 15 95 125 77.5 349 42.5 286 18.5 27 154 75 366 225 356 476 55 25S 28 225 28 345 15 95 125 77.5 379 469.5 311 24 34 1162 783 366 25 46 546 75 25M 28 225 28 345 15 95 125 77.5 379 469.5 311 24 34 1162 783 366 25 46 566 1x8-16 2 11 16M 2 16 212 28 15 95 1 52.5 325 38.5 21 14.5 168 811 486 256 16 254 166 15 16M 2 16 212 28 15 95 1 52.5 325 38.5 21 14.5 168 811 486 256 16 254 175 18.5 16L 2 16 212 28 15 95 1 52.5 325 38.5 254 14.5 17 857 532 256 16 254 197 22 18M 2 16 212 28 15 95 1 52.5 325 393.5 241 14.5 192 879 554 276 18 279 242 3 2L 2 16 212 28 15 95 1 52.5 325 45.5 35 18.5 219 982 657 292 2 318 251 37 2L 2 16 212 28 15 95 1 52.5 325 45.5 35 18.5 219 982 657 292 2 318 258 1x65-2 2 11 16M 225 18 25 32 15 95 1 52.5 324.5 38 21 14.5 168 81.5 486 256 16 254 16 15 16M 225 18 25 32 15 95 1 52.5 324.5 38 21 14.5 168 81.5 486 256 16 254 176 18.5 16L 225 18 25 32 15 95 1 52.5 324.5 38 254 14.5 17 856.5 532 256 16 254 198 22 18M 225 18 25 32 15 95 1 52.5 324.5 393 241 14.5 192 878.5 554 276 18 279 243 3 2L 225 18 25 32 15 95 1 52.5 324.5 45 35 18.5 219 981.5 657 292 2 318 315 37 2L 225 18 25 32 15 95 1 52.5 324.5 45 35 18.5 219 981.5 657 292 2 318 33 1x65-25 2 3 2L 25 2 28 36 18 12 125 65 349 417 35 18.5 219 16 657 292 2 318 316 37 2L 25 2 28 36 18 12 125 65 349 417 35 18.5 219 16 657 292 2 318 331 45 225S/M 25 2 28 36 18 12 125 65 349 433 286 18.5 27 154 75 366 225 356 46 55 25S 25 2 28 36 18 12 125 65 379 482 311 24 34 1162 783 366 25 46 532 75 25M 25 2 28 36 18 12 125 65 379 482 311 24 34 1162 783 366 25 46 552 1x65-315 3 55 25S 28 25 315 4 18 12 125 65 393 496 311 24 34 1176 783 366 25 46 574 75 25M 28 25 315 4 18 12 125 65 393 496 311 24 34 1176 783 366 25 46 594 9 28S 28 25 315 4 18 12 125 65 393 518 368 24 34 1291 898 488 28 457 835 11 28M 28 25 315 4 18 12 125 65 393 518 368 24 34 1291 898 488 28 457 87 125x1-2 2 22 18M 28 2 28 385 18 12 125 65 347.5 43.5 294 14.5 192 91.5 554 276 18 279 253 3 2L 28 2 28 385 18 12 125 65 347.5 415.5 35 18.5 219 14.5 657 292 2 318 325 37 2L 28 2 28 385 18 12 125 65 347.5 415.5 35 18.5 219 14.5 657 292 2 318 34 45 225S/M 28 2 28 385 18 12 125 65 347.5 431.5 286 18.5 27 152 75 366 225 356 47 55 25S 28 2 28 385 18 12 125 65 377.5 48.5 311 24 34 116.5 783 366 25 46 544 75 25M 28 2 28 385 18 12 125 65 377.5 48.5 311 24 34 116.5 783 366 25 46 564 43

ISO Close Coupled Motor Pump Dimensions (2 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 125x1-25 3 55 25S 28 25 315 56 18 12 14 8 49 497 311 24 34 1192 783 366 25 46 577 75 25M 28 25 315 56 18 12 14 8 49 497 311 24 34 1192 783 366 25 46 597 9 28S 28 25 315 56 18 12 14 8 49 519 368 24 34 137 898 488 28 457 835 11 28M 28 25 315 56 18 12 14 8 49 519 368 24 34 137 898 488 28 457 87 125x1-315 3 9 28S 315 28 4 557 18 12 14 8 41 52 368 24 34 138 898 488 28 457 849 11 28M 315 28 4 557 18 12 14 8 41 52 368 24 34 138 898 488 28 457 884 15x125-25 3 9 28S 355 28 315 557 18 12 14 8 41 52 368 24 34 138 898 488 28 457 838 11 28M 355 28 315 557 18 12 14 8 41 52 368 24 34 138 898 488 28 457 86 Remarks: 1. Standard flange drilling to AS2129-1982 Table "E" 2. Other Drilling options are available on request 3. Dimension are in mm 4. Motor dimensions and data may vary depending on the make of the motor. 44

ISO Stub Shaft Pump Parts Description Item Description 1 Motor End Adaptor 4 Gland / Mechanical Seal 6 Fastener Set 7 Volute (Casing) 1 Impeller Key 11 Impeller Nut 12A O-Ring 13 Impeller 17 Muff Coupling 18 Muff Coupling Screws 19 Shaft CC 39 Intermediate Cover 5 Impeller Washer 45 Wear-ring Casing Front (Option) 46 Wear-ring Intermediate cover Rear (Option) 47 & 48 Wear-ring Impeller Front & Rear (Option) 64 Plugs - Casing Drain 64A Plugs - Casing Suct & Disch 45

Notes 46

Chapter Notes Head Chapter Sub Head 47

AUSTRALIA / NEW ZEALAND Franklin Electric (Australia) Pty. Ltd. 16-11 Micro Circuit Dandenong South, Victoria 3175 Australia Toll Free: 13 FRANKLIN Fax: +61 3 9799 55 Tel: +61 3 9799 5 www.franklin-electric.com.au United States Franklin Electric Co., Inc. 4 E. Spring Street, Bluffton, IN 46714 USA Tel: +1.26.824.29 Fax: +1.26.824.299 FE474 3/1