CENTER OF COMPETENCE HIGH-PERFORMANCE AND LIGHTWEIGHT SOLUTIONS ALL SOLUTIONS FROM ONE SINGLE SOURCE A Member of the Eberspächer Group
2 CENTER OF COMPETENCE
CENTER OF COMPETENCE 3 PERFECT DIVERSITY For 25 years we have been developing innovative solutions with and for our partners. As members of the Eberspächer Group, we can now add other areas of expertise to supplement the experience we have gained in development, prototype production, special series production and motorsport, and we can pass this all on to our customers. To put it into a short context, we offer a comprehensive range of exhaust technology competence. CENTER OF COMPETENCE: As a centre of competence for high performance applications and lightweight systems, Prototechnik s main focus is on the areas of development, prototype production and special series production for intake and exhaust systems. Working with the Eberspächer Group, Prototechnik creates tailored solutions from concept design and simulation, to acoustics and performance optimisation, to prototype production, to functionality and endurance tests, to special series production and finally up to spare parts supply. MOTORSPORT: Motor racing activities include the 24 hour race in Le Mans and the FIA European Truck Racing Championship, the DTM and the WTCC, but also a wide variety of other formula series. International teams depend on the innovative solutions from Schwäbisch Gmünd. Thin-wall technology, light weight and special materials are extremely important factors which are increasingly being integrated into series production vehicles. The business unit also specialises in the production of coolant, oil, fuel and ventilation lines, EGR cooling systems as well as other vehicle components made of pipes and sheet metal. Using and processing special materials such as Inconel, aluminium and titanium is a part of our daily work at Prototechnik. It allows us to meet the increasing demands in the various high performance segments as well as the necessity for more and more weight reductions. This knowledge is reflected in a number of successful development, prototyping, special series and motorsport production projects over more than 25 years of the company s history. LIGHT WEIGHT: In comparison to conventional stainless steel, titanium facilitates weight reduction of more than 40 percent. Every ounce of weight saved serves to reduce CO2 emissions and makes the vehicles more environmentally friendly. In particular, the company s special expertise in the use of new materials makes it possible to develop innovative exhaust technology products for series production passenger cars as well as commercial vehicles.
4 CENTER OF COMPETENCE A GOOD SETUP All competences from one single source. This philosophy has been affirmed and developed on the basis of numerous projects. We are always willing to tackle new, exciting and difficult tasks complex special series, manual operations combined with partially automated production processes. From the concept to series production and beyond. Access to Eberspächer R&D expertise and resources ensures that projects are completed quickly and effectively and to an extremely high quality standard. Quality and project management Automotive standards (ISO 9001:2008, DFM, D/P-FMEA, risk management etc.) ISO TS 16949 in the planning phase. Concept and product development Prototype manufacturing Functionality and endurance tests Purchasing and production preparation Special series production Spare parts supply 3D/2D CAD in CATIA, PRO-E and UG CAE CFD, FEA Acoustics Thermodynamics Durability mechanical, dynamic and thermomechanical One piece handmade Samples for functional and durability testing - soft tools Preseries evaluation of series production processes Flow rig Acoustics & thermodynamics Endurance testing component test benches, engine and chassis dynamometer Technical purchasing Series production purchasing supported by the Group Series production process planning Quality planning Partially automated production processes combined with manual operations Batch production combined with one-piece flow 10-15 years in compliance with the standards and longer One project manager one point of contact for the entire project, from concept to the spare parts
CENTER OF COMPETENCE 5 PRODUCT PORTFOLIO We could be known as specialists for specific requirements. We develop and produce intake and exhaust systems for optimal exhaust gas flow, maximum power and torque, exhaust gas aftertreatment and sound engineering. With a great deal of ambition and flexibility, Prototechnik delivers niche-market products in a wide variety of market areas. OUR PRODUCTS: Intake manifolds and systems Exhaust systems Exhaust manifolds - Turbular/high-performance manifolds - Half-shell manifolds - Air-gap insulated manifolds Catalytic converter and DPF systems, ceramic and metal Muffler systems, optionally with valve technology and rolled or pressed Complete systems featuring dual mode and air-to-air Exhaust gas heat exchangers Other pipe systems (charge-air, coolant, oil and fuel lines) in steel and aluminium design Vehicle and chassis components Vehicle prototype shop Design and in-house manufacture of jigs and fixtures OUR MARKETS: Cars, road registered high-performance cars Motorbikes Commercial vehicles Agricultural and construction machinery Special applications (e.g. ship and boat engines, airplane engines, stationary engines, defence...) Hybrid and fuel cell vehicles Motorsports We are proud to say that our products can be found on land, on the water and in the air anywhere that combustion engines are at work. We are seeking new challenges. Tell us your problem and let us solve it.
6 CENTER OF COMPETENCE REFERENCES Our products are used throughout the entire world. For example, at many international motorsport events. MOTORSPORT RANGE : Production of motorsport components for a wide variety of racing series and teams: AUDI Sport, DTM and LMP; BMW Motorsport, WTCC etc.; Mercedes HWA, DTM, F3; Opel DTM; Porsche Carrera Cup, LMP etc. Motorsport products: High-performance intake and exhaust manifolds, light-weight catalytic converters and silencers, low and high pressure fuel lines, air lines, oil lines and welded chassis components PORSCHE CARRERA GT: Air-to-air system development and series production of the intake module and the entire exhaust system for 2 years PORSCHE 911 GT3: Exhaust system development up to start of production within 18 months Dual mode (exhaust valve control) for 74 db(a) with very low exhaust backpressure and with light-weight titanium design SPECIAL SERIES PRODUCTION PROJECTS: System development and prototype production for a variety of manufacturers, e.g. Ford Focus RS, KTM X-Bow, Mercedes-Benz McLaren SLR, Mercedes-Benz SLK 55 AMG, Opel Zafira CNG, Porsche Carrera GT Porsche 997 GT3 1st and 2nd generation, Volkswagen Touareg & Phaeton V10, VW Individual. Extra low volume series exhaust system production for the Zeppelin airship PROTOTYPES: AUDI AG, Quattro GmbH; BMW AG, BMW Motorrad; Daimler cars and commercial vehicles; Deutz AG; KTM Motorrad; Mowag; MTU; Porsche; Volkswagen; various system suppliers MERCEDES -BENZ MCLAREN SLR: A very challenging system development of an exceptional exhaust system packaged in the front end vehicle with sidepipes. Series production for 5 years MERCEDES-BENZ SLK 55 AMG: Exhaust system development, testing and series production of several thousand systems per year. Benchmark in the sound (engineering) sector
CENTER OF COMPETENCE 7 HISTORY 1985 Prototechnik GmbH founded 1989 IFT Ingenieurgesellschaft für Fahrzeugtechnik mbh founded 1995 IFT Prüftechnik GmbH founded 2001 onwards Affiliates move to joint offices in the new administration building in the Gügling industrial estate near Schwäbisch Gmünd Special series production of Mercedes-Benz McLaren SLR, Porsche Carrera GT, Mercedes-Benz SLK 55 AMG, Ford Focus RS, Ducati 999 etc. 2003 onwards Affiliated companies are acquired by Ricardo plc., Ricardo Deutschland branch Special series production of Porsche 911 GT3/ RS/ Cup, Dieselmax land speed world record 2010 BU Prototechnik becomes part of the Eberspächer family
Prototechnik GmbH & Co. KG Güglingstraße 68-70 73529 Schwäbisch Gmünd Germany Phone: +49 7171 8748-100 Fax: +49 7171 8748-400 info@prototechnik.de www.prototechnik.de Version 11/2011. VHM Printed in Germany. Subject to change without notice.