AC Axial Fan & Blower *All products are RoHS compliant. www.sunon.com
N N N N Table of Contents Sunon AC Axial Fan & Blower Engineering Information Fan Numbering System Page p.1 p.2 AC Fan Series 6x6x25mm (MagLev Motor AC Fan) 7x7x25mm (MagLev Motor AC Fan) 8x8x25 mm (MagLev Motor AC Fan) 8x8x25mm 8x8x38mm 92x92x25mm (MagLev Motor AC Fan) 92x92x25mm 12x12x25mm (V) 12x12x25mm (V) 12x12x38mm (V) 12x12x38mm (V) 12x12x38mm (Plastic Frame) 12x12x38mm (New Type) 12x12x38mm (New Type-High ) 12x12x38mm (Dual AC ) 12x12x38mm (Low ) 171x151x51mm 171x151x51mm ( Alveolate Motor) ø171x51mm ( Alveolate Motor) 176x176x89mm ( Alveolate Motor) ø254x89mm ( Alveolate Motor) 12x12x31mm (Blower) 17.5 ~ 18 28 ~ 29 4 ~ 41 17 ~ 22 23 ~ 31 52 ~ 54 21 ~ 37 46 ~ 8 46 ~ 8 7 ~ 117 7 ~ 117 85 ~ 1 95 ~ 117 112 ~ 124 95 ~ 49 ~ 5 18 ~ 2 23 ~ 239 23 ~ 239 315 ~ 335 425 ~ 87 2 ~ 22 p.3 p.4 p.5 p.6 p.7 p.8 p.9 p.1 p.11 p.12 p.13 p.14 p.15 p.16 p.17 p.18 p.19 p.2 p.21 p.22 p.23 p.24 Certification ISO/TS16949 ISO91:2 * Note: For critical or extreme environments, including non stop operation, please contact Sunon and we will gladly provide assistance with your product selection to ensure an appropriate cooling product for your application. * Note: The Life Expectancy of the fan has not been evaluated for use in combination with any end application. Therefore, the Life Expectancy Test Reports(L1 and MTTF Report) that relate to the fan are only for reference.
ENGINEERING INFORMATION Alveolate Motor AC fan series with automatic motor-wire wrapping technology ensures stable performance of high wind volume, low acoustic noise, also available with functions of dual spinning rate, and thermal cutout. Sunon-Alveolate Motor VS. Traditional Shaded-pole Motor SUNON-Alveolate Motor 1.The Alvolate Motor is equipped with starting stator coils and working ones. The starting coils form a low starting voltage with the capacitors. For example, an VAC (the fixed voltage) Alveolate Motor can be started with 6 VAC. Traditional Shaded-Pole Motor 1.The Traditional Shaded-Pole Motor, designed with single-wire wrapping, is started by the starting copper and cannot be started with low voltage. An VAC Traditional Shaded- Pole motor will need more than 8VAC to run, 2VAC more than the Alveolate one. 2.The coils do not produce high temperature and consumes less electricity. The temperature is normally around 5. Therefore, the motor is always stable and reliable. 2.The Traditional Shaded-Pole Motor consumes electricity twice as much as the Alveolate Motor. It is not reliable because the temperature is usually higher than 7. 3.The Thermal Cutout can protect the motor. 4.The motor has a large torsion to produce high wind pressure and wind volume. 3.The Thermal Cutout is an option. 4.General wind pressure and wind volume. 5.The motor is equipped with the third wire, ready to comply with the customer s systems. 5.Without the third wire. 1
AC Fan Numbering System Ex) SF8AT 1 8 2 H B L. General AC Fan MODEL SERIES SFxxx SPxxx DPxxx VOLTAGE 1 : VAC 2 : 22-24 VAC FRAME SIZE 8 : 8 mm 9 : 92 mm 12 : 12 mm FRAME THICKNESS 2 : 25 mm 3 : 38 mm RoHS Compliance TERMINALS T : Terminal L : Lead wire BEARING SYSTEM B : Ball S : SPEED X : Super H : High M : Middle L : Low New Type AC Fan Ex) A 1 17 5 H B T MODEL SERIES A : New AC fan series AB : New AC blower series MA : MagLev AC Fan series VOLTAGE 1 : VAC 3 : 38 VAC 2 : VAC FRAME SIZE 8 : 8 mm 17 : 172 mm 9 : 92 mm 25 : 254 mm 12 : 12 mm FRAME THICKNESS 2 : 25 mm 7 : 72 mm 3 : 31~38mm 9 : 89~9mm 5 : 5~51 mm TERMINALS T : Terminal L : Lead wire BEARING SYSTEM V: MagLev S : B : Ball SPEED X : Super H : High M : Middle L : Low Suffixes have the following significance : T : Thermal Cutout TC : Alveolate Motor with Thermal Cutout and Capacitor TC.R : Round Frame, Alveolate Motor with Thermal Cutout and Capacitor N : New frame : RoHS compliance * Alveolate Motor only available in : TC model 2
6x6x25 mm MagLev Motor AC Fan 17.5~18 CFM MA162-HVL MA262-HVL.191/.185.198/.211 3.6/3.6 4.1/4.4 41/42 41/42 17.5/18 17.5/18.19/.2.19/.2 3/31 3/31 81 81 Frame : PBT Plastic - Characteristics (Inch-H 2 O) Vapo (5Hz).2.18.16.14.12.1.8.6.4.2 5 1 15 2 Vapo (6Hz).2.18.16.14.12.1.8.6.4.2 5 1 15 2 8-ø4.3±.3 ROTATION ø65.6 ø63.5 5±.3 6±.5 5±.3 3±3 25±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 3
7x7x25 mm MagLev Motor AC Fan 28~29 CFM MA172-HVL MA272-HVL.28/.197.27/.22 3.7/3.7 4.3/4.4 38/39 38/39 28/29 28/29.17/.18.17/.18 3/31 3/31 9 9 Frame : PBT Plastic - Characteristics (Inch-H 2 O) Vapo (5Hz).18 HVL.15.12.9.6.3 6 12 18 24 3 Vapo (6Hz).18 HVL.15.12.9.6.3 6 12 18 24 3 8-ø4.3±.3 ROTATION ø79 ø8.3 5±.3 3±1 6±.3 7±.5 25±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 4
8x8x25 mm MagLev Motor AC Fan 4~41 CFM MA182-HVL MA282-HVL.22/.21.215/.225 3.6/3.6 4.6/4.6 32/33 32/33 4/41 4/41.14/.15.14/.15 32/33 32/33 12.2 12.2 Frame : PBT Plastic - Characteristics (Inch-H 2 O) 8-ø4.3±.3 ROTATION ø87.2 ø91.8 5±.3 3±1 Vapo (5Hz).16 HVL.14.12.1.8.6.4.2 7 14 21 28 35 42 Vapo (6Hz).16 HVL.14.12.1.8.6.4.2 7 14 21 28 35 42 71.5±.3 8±.5 25±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 5
8x8x25 mm 17~22 CFM SF8AT SF8AT SF238AT SF238AT 182HSL. 182HBL. 282HSL. 282HBL..12/.1.12/.1.7/.7.7/.7 12/11 12/11 14/13.5 14/13.5 23/275 245/29 23/275 245/29 17/21 18/22 17/21 18/22.12/.18.13/.19.12/.18.13/.19 29/33 3/34.5 29/33 3/34.5 26 26 26 26 Safety : UL-CUL/TUV NORD/CE/CCC/BSMI - Characteristics Ball (5Hz) Ball (6Hz) (5Hz) (6Hz).2.2.2.2 (Inch-H 2 O).16.12.8.4 6 12 18 24 ROTATION GROUND LUG M4 ø77 ø76 5 33±15.16.12.8.4 6 12 18 24.16.12.8.4 6 12 18 24.16.12.8.4 6 12 18 24 8-ø4.3±.3 71.5±.3 8±.5 3.7±.3 25.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 6
8x8x38 mm 23~31 CFM SF8A SF8A SF238A SF238A 183HSL. 183HBL. 283HSL. 283HBL..15/.13.15/.13.9/.8.9/.8 14/12 14/12 18/16 18/16 23/275 24/285 23/275 24/285 23/3 24/31 23/3 24/31.12/.18.13/.19.12/.18.13/.19 31/35 32/36.5 31/35 32/36.5 34 34 34 34 Safety : UL-CUL/TUV NORD/CE/CCC/BSMI - Characteristics Ball (5Hz) Ball (6Hz) (5Hz) (6Hz).2.2.2.2 (Inch-H 2 O).16.12.8.4 4 8 12 16 2 24 28 32 ROTATION 2 GROUND LUG M4 ø76.6 ø74.8 5 33±15.16.12.8.4 4 8 12 16 2 24 28 32.16.12.8.4 4 8 12 16 2 24 28 32.16.12.8.4 4 8 12 16 2 24 28 32 8-ø4.3±.3 71.5±.3 8±.5 38.5±.5 4±.3 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 7
92x92x25 mm MagLev Motor AC Fan 52~54 CFM MA192-HVL MA292-HVL.114/.118.13/.16 3.6/3.6 4.6/4.6 29/3 29/3 52/54 52/54.12/.14.12/.14 31/32 31/32 119.7 119.7 Frame : PBT Plastic - Characteristics (Inch-H 2 O) Vapo (5Hz).14 HVL.12.1.8.6.4.2 5 15 25 35 45 55 Vapo (6Hz).14 HVL.12.1.8.6.4.2 5 15 25 35 45 55 8-ø4.3±.3 ROTATION ø91.8 ø13.5 5±.3 3±1 82.5±.3 92±.5 25±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 8
92x92x25 mm 21~37 CFM SF92A SF92A SF92A SF92A SF92A SF92A SF92A SF92A SF2392A SF2392A SF2392A SF2392A SF2392A SF2392A SF2392A SF2392A 192HSL. 192HST. 192MSL. 192MST. 192HBL. 192HBT. 192MBL. 192MBT. 292HSL. 292HST. 292MSL. 292MST. 292HBL. 292HBT. 292MBL. 292MBT..12/.11.12/.11.6/.6.6/.6.12/.11.12/.11.7/.6.7/.6.7/.6.7/.6.7/.7.7/.7.7/.6.7/.6.7/.7.7/.7 13/12 13/12 7/6 7/6 13/12 13/12 7/6 7/6 14.5/14 14.5/14 15/14 15/14 14.5/14 14.5/14 15/14 15/14 225/275 225/275 155/17 155/17 235/285 235/285 18/21 18/21 225/275 225/275 2/25 2/25 235/285 235/285 22/27 22/27 29/36 29/36 21/26 21/26 3/37 3/37 23/28 23/28 29/36 29/36 27/33 27/33 3/37 3/37 28/35 28/35.12/.18.12/.18.8/.9.8/.9.13/.19.13/.19.1/.11.1/.11.12/.18.12/.18.11/.16.11/.16.13/.19.13/.19.12/.18.12/.18 36/39 36/39 28/3 28/3 37/4 37/4 31/33 31/33 36/39 36/39 32/37 32/37 37/4 37/4 35/38 35/38 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 Safety : UL-CUL/TUV NORD/CE/CCC/BSMI - Characteristics ROTATION 8-ø4.3±.3 TERMINAL TYPE 7.5 (THICK.5) ø89 ø87 5 31±15 (Inch-H 2 O) Ball (5Hz).2 HBL/HBT.18 MBL/MBT(22V) MBL/MBT(11V).16.14.12.1.8.6.4.2 5 1 15 2 25 3 35 4 Ball (6Hz).2 HBL/HBT.18 MBL/MBT(22V) MBL/MBT(11V).16.14.12.1.8.6.4.2 5 1 15 2 25 3 35 4 (5Hz).2 HSL/HST.18 MSL/MST(22V) MSL/MST(11V).16.14.12.1.8.6.4.2 5 1 15 2 25 3 35 4 (6Hz).2 HSL/HST.18 MSL/MST(22V) MSL/MST(11V).16.14.12.1.8.6.4.2 5 1 15 2 25 3 35 4 GROUND LUG M4 82.5±.3 91.5±.5 3.5±.3 25.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 9
12x12x25 mm 46~8 CFM SP11AT SP11AT SP13AT SP13AT SP11AT SP11AT SP13AT SP13AT 1122HSL. 1122HST. 1122LSL. 1122LST. 1122HBL. 1122HBT. 1122LBL. 1122LBT..21/.19.21/.19.14/.13.14/.13.21/.19.21/.19.12/.11.12/.11 19/18 19/18 14/13 14/13 19/18 19/18 12.5/11.5 12.5/11.5 2/23 2/23 16/18 16/18 215/25 215/25 17/19 17/19 64/78 64/78 46/53 46/53 66/8 66/8 47/54 47/54.13/.16.13/.16.11/.12.11/.12.14/.17.14/.17.12/.13.12/.13 43/46 43/46 35/38 35/38 44/48 44/48 37/4 37/4 33 33 33 33 33 33 33 33 Safety : UL-CUL/TUV NORD/CE/CCC/BSMI - Characteristics (Inch-H 2 O) Ball (5Hz) Ball (6Hz) (5Hz) (6Hz).18.18.18.18 HSL/HST.16.16.16 LSL/LST.16.14.12.1.8.6.4.2 14 28 42 56 7 84.14.12.1.8.6.4.2 14 28 42 56 7 84 TERMINAL TYPE 7.5 (THICK.5) ø ø.5 5 32±1.14.12.1.8.6.4.2 14 28 42 56 7 84.14.12.1.8.6.4.2 HSL/HST LSL/LST 14 28 42 56 7 84 GROUND LUG M4 14.8±.3 119±.5 8-ø4.3±.3 3.5±.3 25.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 1
12x12x25 mm 46~8 CFM DP21AT DP21AT DP23AT DP23AT DP21AT DP21AT DP23AT DP23AT 2122HSL. 2122HST. 2122LSL. 2122LST. 2122HBL. 2122HBT. 2122LBL. 2122LBT. 22/24 22/24 22/24 22/24 22/24 22/24 22/24 22/24.9/.9.9/.9.7/.7.7/.7.9/.9.9/.9.7/.7.7/.7 19/19 19/19 14/13 14/13 19/19 19/19 14/13 14/13 2/23 2/23 16/18 16/18 215/25 215/25 17/19 17/19 64/78 64/78 46/53 46/53 66/8 66/8 47/54 47/54.13/.16.13/.16.11/.12.11/.12.14/.17.14/.17.12/.13.12/.13 43/46 43/46 35/38 35/38 44/48 44/48 37/4 37/4 295 295 33 33 295 295 33 33 Safety : UL-CUL/TUV NORD/CE/CCC/BSMI - Characteristics (Inch-H 2 O) Ball (5Hz) Ball (6Hz) (5Hz) (6Hz).18.18.18.18 HSL/HST.16.16.16 LSL/LST.16.14.14.14.14 ø ø.5 5 32±1.12.1.8.6.4.2 14 28 42 56 7 84.12.1.8.6.4.2 14 28 42 56 7 84.12.1.8.6.4.2 14 28 42 56 7 84.12.1.8.6.4.2 HSL/HST LSL/LST 14 28 42 56 7 84 GROUND LUG M4 14.8±.3 119±.5 8-ø4.3±.3 3.5±.3 25.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 11
12x12x38 mm 7~117 CFM SP1A SP1A SP11A SP11A SP12A SP12A SP13A SP13A SP1A SP1A SP11A SP11A SP12A SP12A SP13A SP13A 1123XSL. 1123XST. 1123HSL. 1123HST. 1123MSL. 1123MST. 1123LSL. 1123LST. 1123XBL. 1123XBT. 1123HBL. 1123HBT. 1123MBL. 1123MBT. 1123LBL. 1123LBT..26/.24.26/.24.21/.18.21/.18.17/.16.17/.16.13/.11.13/.11.26/.24.26/.24.21/.18.21/.18.17/.16.17/.16.13/.11.13/.11 22/2 22/2 2/18 2/18 15/15 15/15 11/11 11/11 22/2 22/2 2/18 2/18 16/15 16/15 11/11 11/11 27/31 27/31 255/29 255/29 24/26 24/26 22/2 22/2 285/315 285/315 275/35 275/35 25/27 25/27 215/23 215/23 95/ 95/ 85/15 85/15 78/84 78/84 76/7 76/7 97/117 97/117 87/17 87/17 8/88 8/88 72/78 72/78.33/.38.33/.38.25/.3.25/.3.14/.21.14/.21.12/.8.12/.8.34/.39.34/.39.26/.32.26/.32.15/.22.15/.22.9/.13.9/.13 44/49 44/49 43/48 43/48 33/38 33/38 38/36 38/36 45/5 45/5 45/5 45/5 35/4 35/4 37/39 37/39 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 - Characteristics (Inch-H 2 O) Ball (5Hz) Ball (6Hz) (5Hz) (6Hz).4.4.4.4 XBL/XBT XBL/XBT XSL/XST HBL/HBT HBL/HBT HSL/HST.35 MBL/MBT.35 MBL/MBT.35 MSL/MST.35 LBL/LBT LBL/LBT LSL/LST.3.3.3.3.25.2.15.1.5 15 3 45 6 75 9 15 12.25.2.15.1.5 15 3 45 6 75 9 15 12.25.2.15.1.5 15 3 45 6 75 9 15 12.25.2.15.1.5 15 3 45 6 75 9 15 12 ROTATION TERMINAL TYPE 7.5 (THICK.5) ø.5 ø116 5 31±15 XSL/XST HSL/HST MSL/MST LSL/LST 14.8±.3 119±.5 8-ø4.3±.3 4±.3 38.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 12
12x12x38 mm 7~117 CFM DP2A DP2A DP21A DP21A DP22A DP22A DP23A DP23A DP2A DP2A DP21A DP21A DP22A DP22A DP23A DP23A 2123XSL. 2123XST. 2123HSL. 2123HST. 2123MSL. 2123MST. 2123LSL. 2123LST. 2123XBL. 2123XBT. 2123HBL. 2123HBT. 2123MBL. 2123MBT. 2123LBL. 2123LBT..14/.12.14/.12.125/.11.125/.11.9/.8.9/.8.6/.5.6/.5.14/.12.14/.12.125/.11.125/.11.9/.8.9/.8.5/.6.5/.6 22/21 22/21 2/19 2/19 16/15 16/15 11/1 11/1 22/21 22/21 2/19 2/19 16/15 16/15 1/1 1/1 27/31 27/31 255/29 255/29 23/25 23/25 2/18 2/18 285/315 285/315 275/35 275/35 24/26 24/26 23/215 23/215 95/ 95/ 85/15 85/15 78/84 78/84 7/63 7/63 97/117 97/117 87/17 87/17 78/84 78/84 78/72 78/72.33/.38.33/.38.25/.3.25/.3.14/.21.14/.21.8/.7.8/.7.34/.39.34/.39.26/.32.26/.32.14/.21.14/.21.13/.9.13/.9 44/49 44/49 43/48 43/48 33/38 33/38 36/32 36/32 45/5 45/5 45/5 45/5 34/39 34/39 39/37 39/37 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 - Characteristics (Inch-H 2 O) Ball (5Hz) Ball (6Hz) (5Hz) (6Hz).4.4.4.4.35.3.25.2.15.1.5 15 3 45 6 75 9 15 12.35.3.25.2.15.1.5 15 3 45 6 75 9 15 12.35.3.25.2.15.1.5 15 3 45 6 75 9 15 12.35.3.25 31±15 ø.5 ø116 5.2.15.1.5 15 3 45 6 75 9 15 12 14.8±.3 119±.5 8-ø4.3±.3 4±.3 38.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 13
4-ø4.3±.3 4-ø4.3±.3 12x12x38 mm 85~1 CFM SP19WR SP19WR SP19WR SP19WR DP29WR DP29WR DP29WR DP29WR 1123HST. 1123HSL. 1123HBT. 1123HBL. 2123HST. 2123HSL. 2123HBT. 2123HBL..25/.22.25/.22.25/.22.25/.22.13/.12.13/.12.13/.12.13/.12 22/2 22/2 22/2 22/2 22/21 22/21 22/21 22/21 25/29 25/29 25/29 25/29 25/29 25/29 25/29 25/29 85/1 85/1 85/1 85/1 85/1 85/1 85/1 85/1.28/.35.28/.35.25/.3.25/.3.28/.35.28/.35.25/.3.25/.3 41/47 41/47 42/48 42/48 41/47 41/47 42/48 42/48 465 465 465 465 465 465 465 465 Frame : PBT Plastic - Characteristics (Inch-H 2 O) Ball / (5Hz).3 HST/HSL HBT/HBL.25.2.15.1.5 15 3 45 6 75 9 Ball / (6Hz).4 HST/HSL.35 HBT/HBL.3.25.2.15.1.5 15 3 45 6 75 9 15 3±1 5±.3 ø.5 ø116 14.±.3 119.5±.5 7.±.5 38.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 14
12x12x38 mm 95~117 CFM A1123-HST A1123-HSL A1123-HBT A1123-HBL A2123-HST A2123-HSL A2123-HBT A2123-HBL.28/.25.28/.25.28/.25.28/.25.14/.12.14/.12.14/.12.14/.12 23/2 23/2 23/2 23/2 23/2 23/2 23/2 23/2 27/31 27/31 27/31 27/31 27/31 27/31 27/31 27/31 95/ 95/ 97/117 97/117 95/ 95/ 97/117 97/117.33/.38.33/.38.34/.39.34/.39.33/.38.33/.38.34/.39.34/.39 44/49 44/49 45/5 45/5 44/49 44/49 45/5 45/5 - Characteristics Ball (5Hz).4 Ball (6Hz).4 (5Hz).4 (6Hz).4 (Inch-H 2 O).35.3.25.2.15.1.5 15 3 45 6 75 9 15 12.35.3.25.2.15.1.5 15 3 45 6 75 9 15 12.35.3.25.2.15.1.5 15 3 45 6 75 9 15 12.35 5 3±15.3.25.2.15.1.5 15 3 45 6 75 9 15 12 ø ø114 8-ø4.3±.3 14.8±.3 119.5±.5 4±.3 38.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 15
12x12x38 mm High 112~124 CFM A1123-HST A1123-HSL A1123-HBT A1123-HBL A2123-HST A2123-HSL A2123-HBT A2123-HBL (7). (7). (7). (7). (7). (7). (7). (7)..28/.25.28/.25.28/.25.28/.25.14/.12.14/.12.14/.12.14/.12 23/21 23/21 23/21 23/21 24/22 24/22 24/22 24/22 25/275 25/275 25/275 25/275 25/275 25/275 25/275 25/275 112/124 112/124 112/124 112/124 112/124 112/124 112/124 112/124.3/.28.3/.28.3/.28.3/.28.3/.28.3/.28.3/.28.3/.28 43/46 43/46 44/47 44/47 43/46 43/46 44/47 44/47 - Characteristics (Inch-H 2 O) Ball (5Hz) Ball (6Hz) (5Hz) (6Hz).35 HBL/HBT.35 HBL/HBT.35 HBL/HBT.35 HBL/HBT HST/HSL HST/HSL HST/HSL HST/HSL.3.3.3.3.25.25.25.25.2.2.2.2.15.15.15.15.1.1.1.1.5.5.5.5 2 4 6 8 1 12 14 2 4 6 8 1 12 14 2 4 6 8 1 12 14 2 4 6 8 1 12 14 TERMINAL TYPE 7.5 (THICK.5) 3±15 5±1 G 4 ø ø114 14.8±.3 119.5±.5 8-ø4.3±.3 38.5±.5 4±.3 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 16
12x12x38 mm Dual AC 95~ CFM SF1212AD SF1212AD SL. BL..27/.24.13/.12.27/.24.13/.12 21.5/19 19.5/19 21.5/19 19.5/19 27/31 27/31 27/31 27/31 95/ 95/ 95/ 95/.33/.38.33/.38.33/.38.33/.38 44/49 44/49 44/49 44/49 55 55 55 55 - Characteristics Connection Wire (Inch-H 2 O) Ball/ (5Hz).4.35.3.25.2.15.1.5 15 3 45 6 75 9 15 12 Ball/ (6Hz).4.35.3.25.2.15.1.5 15 3 45 6 75 9 15 12 black red white blue black red white blue VAC 23VAC start red blue start white black Wire Connection diagram #26AWG ROTATION G 8 4 ø.5 ø116 31±15 5±1 14.8±.3 119±.5 8-ø4.3±.3 4±.3 38.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 17
12x12x38 mm Low 49~5 CFM DP23A DP23A 2123LBL.(5). 2123LBT.(5)..4/.4.4/.4 8/8 8/8 165/16 165/16 5/49 5/49.8/.7.8/.7 26/25 26/25 55 55 Safety : TUV/CE/BSMI - Characteristics (Inch-H 2 O) Ball (5Hz).8 LBL/LBT.7.6.5.4.3.2.1 1 2 3 4 5 6 Ball (6Hz).8 LBL/LBT.7.6.5.4.3.2.1 1 2 3 4 5 6 ROTATION 8-ø4.3±.3 ø116 31±15 SUNON ø.5 5±.5 14.8±.3 4±.3 119±.5 38.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 18
171x151x51 mm 18~2 CFM A1175-HBL A1175-HBT A2175-HBL A2175-HBT T. T. T. T..59/.48.59/.48.28/.24.28/.24 39/36 39/36 39/36 39/36 265/295 265/295 265/295 265/295 18/2 18/2 18/2 18/2.48/.38.48/.38.48/.38.48/.38 52/55 52/55 52/55 52/55 957 957 957 957 - Characteristics (Inch-H 2 O).5.4.3.2.1 Ball (5Hz) HBL/HBT 4 8 12 16 2 24.5.4.3.2.1 Ball (6Hz) HBL/HBT 4 8 12 16 2 24 151±.5 28±1 8 #18AWG ROTATION SUNON 4-ø4.5±.3 TERMINAL TYPE 7.5 (THICK.5) ø147.8 ø145 162±.5 51±.5 171.5±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 19
171x151x51 mm Alveolate Motor 23~239 CFM A1175-HBL A1175-HBT A2175-HBL A2175-HBT TC. TC. TC. TC..22/.23.22/.23.11/.11.11/.11 25/27 25/27 25/26 25/26 28/32 28/32 28/32 28/32 23/239 23/239 23/239 23/239.62/.69.62/.69.62/.69.62/.69 51/58 51/58 51/58 51/58 98 98 98 98 - Characteristics Ball (5Hz).7 Ball (6Hz).7 8-ø4.5±.3 ø146 ø166 #18AWG 28±1 5 134±.5 151±.5 (Inch-H 2 O).6.5.4.3.2.1 4 8 12 16 2 24.6.5.4.3.2.1 4 8 12 16 2 24 161.5±.5 171.5±.5 46±.3 51±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 2
ø146 ø171x51 mm Alveolate Motor 23~239 CFM A1175-HBL A1175-HBT A2175-HBL A2175-HBT TC.R. TC.R. TC.R. TC.R..22/.23.22/.23.11/.11.11/.11 25/27 25/27 25/26 25/26 28/32 28/32 28/32 28/32 23/239 23/239 23/239 23/239.62/.69.62/.69.62/.69.62/.69 51/58 51/58 51/58 51/58 98 98 98 98 - Characteristics.8 Ball (5Hz).8 Ball (6Hz) 8-ø4.5±.3 ø166 #18AWG 28±1 5 134±.5 (Inch-H 2 O).7.6.5.4.3.2.1 4 8 12 16 2 24 28.7.6.5.4.3.2.1 4 8 12 16 2 24 28 161.5±.3 171.5±.5 46±.3 51±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 21
176x176x89 mm Alveolate Motor 315~335 CFM A1179-HBT A1179-HBL A2179-HBT A2179-HBL TC. TC. TC. TC..25/.27.25/.27.11/.15.11/.15 24/3 24/3 23/3 23/3 28/325 28/325 28/325 28/325 315/335 315/335 315/335 315/335.65/.8.65/.8.65/.8.65/.8 62/66 62/66 62/66 62/66 196 196 196 196 - Characteristics (Inch-H 2 O) Ball (5Hz).9 HBT/HBL.8.7.6.5.4.3.2.1 4 8 12 16 2 24 28 32 36 Ball (6Hz).9 HBT/HBL.8.7.6.5.4.3.2.1 4 8 12 16 2 24 28 32 36 3±1 8 #2AWG 8-ø5.8±.3 TERMINAL TYPE 7.5 (THICK.5) ø16 ø161 152.7±.3 176±.5 6±.3 89±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 22
ø254x89 mm Alveolate Motor 425~87 CFM A1259-MBL A1259-MBT A1259-HBL A1259-HBT A1259-XBL A1259-XBT A2259-MBL A2259-MBT A2259-HBL A2259-HBT TC.N. TC.N. TC.N. TC.N. TC.N. TC.N. TC.N. TC.N. TC.N. TC.N..23/.23.23/.23.6/.65.6/.65.83/1.1.83/1.1.15/.13.15/.13.24/.27.24/.27 2/23 2/23 63/72 63/72 88/12 88/12 23/3 23/3 56/6 56/6 14/16 14/16 21/19 21/19 26/29 26/29 14/16 14/16 21/19 21/19 425/5 425/5 65/585 65/585 8/87 8/87 425/5 425/5 65/585 65/585.27/.31.27/.31.35/.31.35/.31.76/.62.76/.62.27/.31.27/.31.35/.31.35/.31 54/57 54/57 62/6 62/6 68/7 68/7 54/57 54/57 62/6 62/6 23 23 23 23 24 24 23 23 23 23 - Characteristics (Inch-H 2 O) Ball (5Hz).8.7.6.5.4.3.2.1 XBL/XBT HBL/HBT MBL/MBT Ball (6Hz).8 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9.7.6.5.4.3.2.1 HBL/HBT XBL/XBT MBL/MBT ROTATION 32±1 1±1 #2AWG TERMINAL TYPE 7.5 (THICK.5) ø223.6 16-ø4.5 ROTATION ø231.9 SUNON M5 ø245.5±.5 89±.5 ø254± 1.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 23
12x12x31 mm 2~22 CFM AB1123-HST AB1123-HSL AB1123-HBT AB1123-HBL AB2123-HST AB2123-HSL AB2123-HBT AB2123-HBL.25/.21.25/.21.25/.21.25/.21.14/.11.14/.11.14/.11.14/.11 2/18 2/18 2/18 2/18 2/18 2/18 2/18 2/18 26/29 26/29 26/29 26/29 26/29 26/29 26/29 26/29 2/22 2/22 2/22 2/22 2/22 2/22 2/22 2/22.32/.46.32/.46.32/.46.32/.46.32/.46.32/.46.32/.46.32/.46 48/5 48/5 48/5 48/5 48/5 48/5 48/5 48/5 678 678 678 678 678 678 678 678 - Characteristics (Inch-H 2 O) Ball / (5Hz).5 HBT/HST HBL/HSL.4.3.2.1 Ball / (6Hz).5.4.3.2.1 HBT/HST HBL/HSL 3 6 9 12 15 18 21 24 3 6 9 12 15 18 21 24 12.5±.5 37±.5 52.5±.5 43.5±.5 31±.5 M4 NUT 55±.5 18.75±.5 52.5±.5 52.5±.5 12.5±.5 52.5±.5 48.7±.5 * are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information. 24
Headquarters Sunonwealth Electric Machine Industry Co., Ltd. TEL: +886-7-8135888 E-mail:sunon@email.sunon.com.tw Sunon Inc. (U.S.A.) TEL: +1-714-255-28 E-mail:info@sunon.com Sunon SAS (Europe) TEL: +33-1-46154515 E-mail:info@sunoneurope.com Sunon Taipei Office (Taiwan) TEL:+886-2-27992383 Sunon Shen Zhen Office (China) TEL:+86-755-2688688 E-mail:sunon@email.sunon.com.tw Sunon Beijing Office (China) TEL:+86-1-62669511 E-mail:sunon@email.sunon.com.tw Sunon Wuhan Office (China) TEL:+86-27-81388268 E-mail:sunon@email.sunon.com.tw 216/7/3 (241-W) 216 SUNONWEALTH Electric Machine Industry Co., Ltd.