SUNON Magnetic Levitation System () Fan Blower Cap Fan Dish Fan SUNON SUNON SUNON Magnetic Plate the Magic of Magic Magnetic Plate, the Heart of SUNON Design Tells You the Secret Why a Motor Could Operate Defect-free Magnetic Plate, SUNON's Exclusive Innovation U.S. PAT. 6,097,1
Fan Motor Domination A Stunning New Tech From SUNON~ Magnetic Levitation System ] ^ Noise-Free, Vibration-Free, Super Long Life Sunon has recently introduced its latest innovation called Magnetic Levitation System () and soon causes great impact on motor field. design can collocate with all kinds of traditional motors using with sleeve bearing or ball bearing, helping fan motors creating an unprecedented vibration-free, noise-free operation environment, which is in urgent necessity for thermal management of PC and IT industry. The principle of SUNON design comes from the utilizing of magnetic force induced by the existing magnet inside the hub and the magnetic plate added to the PCB of the fan. When the fan is operating, the perfectly balanced rotor assembly would rotate in nearly perfect circular motion in a consistent orbit and the center of rotation of the rotor shaft would be the true centerline of the shaft and the bearing assembly. This phenomenon eliminates any rotational vibration and rubs between the shaft and the inner surface of the bearing in any resting position. Accordingly, this design creates unprecedented vibration-free and therefore noise-free operation condition for the fan. For traditional fan motors, with either sleeve or ball bearing, in addition to their known advantages and disadvantages, there are some shortcomings as shown in the following table : Sleeve Bearing Ball Bearing Deficiency of Traditional Motors Weight of rotor is entirely loaded to the shaft, abrasive rotation between shaft and bearing will result in irregular and rough surface on inner surface of bearing bore. The fan motor rotation becomes not smooth and in return causes operation noise and shortens fan life. The oil ring and mylar washer not only create excess friction area but also prevent the high temperature gas evaporated from the lubricating oil from escaping to outside the fan assembly. Such gas if is not released appropriately before being solidified, would become nitride particles and rest in the gap between shaft and bearing bore. This causes the rotor stuck and induces excessive noise. When fan motor is operating, the steel balls inside generate higher rotational noise than that of sleeve bearing Construction of Ball bearing is quite weak and unable to absorb external impact and/or vibration therefore would easily be damaged and result in louder rotational noise. SUNON Solution + Vapo Bearing Entire weight of rotor assembly is totally neutralized by magnetic force in any rest position, keeping motor rotates evenly at a fixed center line and keeps a consistent distance from inner surface of bearing. No traditional rubs and noise occurred. Oil ring, washer, and lubricant for bearing assembly are no longer used in structure. Hence no more oil leakage or rotor stuck problem. design allows the fan operates in temperature higher than 70 0 C. SUNON Magnetic Levitation System metal tube dust cap fixing ring stator P.C.B. cap bearing magnetic plate Because of so many not-easy-to-resolve disadvantages in traditional fan motors, Sunon took the challenge and has devoted many years in research and development on new motor structure for eliminating such disadvantages. As a result, design, the most revolutionary technology, once again wins Sunon's reputation. What Makes Magic flexible magnet When the motor with the technology is in operation, magnetic force between the permanent magnet in the hub and the magnetic plate mounted on the PCB helps to attract the impeller rotor towards the end point of shaft. The weight of the rotor is entirely neutralized by the magnetic force and enables the shaft turning without being affected by the gravitational force due to the dead weight of the rotor assembly, pivotally held in the bearing. In this way, a constant distance between bearing and shaft is maintained naturally without causing any contacts between the two surfaces. Because the shaft rotates evenly in a constant orbit and the rotor is held at fixed center line of rotation, no matter what the position is, during the operation of fan, there is no friction or noise created, and no slanting and wobbling happened, which means the bearing life is extended much longer. In addition for sleeve and ball bearings, also works well with Sunon's another own invention, the Vapo bearing, which features its specially treated inner surface to resist abrasions. With the combination of the design and Vapo bearing, all the advantages of ball and sleeve bearings are maintained but defects eradicated. In addition, Sunon's Vapo bearing with is capable of operating at temperature even higher than 70 0 C.
SUNON Magnetic Levitation System() 2 Phase Half Wave Motor Series Fan xx10 KD0501PFB1-8 1 3 KD0501PFB2-8 1 0. KD0501PFB3-8 0.13 KD0501AFB1-8 1 3 KD0501AFB2-8 1 0. KD0501AFB3-8 0.13 xx6 KD0502PEV1-8.N KD0502PEV2-8.N KD0502PEV3-8.N KD0502PEB1-8.N KD0502PEB2-8.N KD0502PEB3-8.N 100 100 xx10 KD0502PFB1-8.V KD0502PFB2-8.V KD0502PFB3-8.V KD0502AFB1-8.V KD0502AFB2-8.V 5 100 100 KD0502AFB3-8.V 5 xx15 KD0502PHB1-8 KD0502PHB2-8 KD0502PHB3-8 100 xx10 KD0503PFB1-8.V KD0503PFB2-8.V KD0503PFB3-8.V KD0503AFB1-8.V KD0503AFB2-8.V 5 5 5 KD0503AFB3-8.V 6 xx15 KD0503PHB1-8 KD0503PHB2-8 KD0503PHB3-8 5 xx6 KD05PEV1-8.N KD05PEV2-8.N KD05PEV3-8.N KD05PEB1-8.N KD05PEB2-8.N KD05PEB3-8.N xx10 KD05PFB1-8 KD05PFB2-8 KD05PFB3-8 5 KD0504PEV1-8 KD0504PEV2-8 KD0504PEB1-8 KD0504PEB2-8 5 5 5 5 3.1 xx6 KD0503PEV1-8.N KD0503PEV2-8.N KD0503PEV3-8.N KD0503PEB1-8.N KD0503PEB2-8.N KD0503PEB3-8.N 5 5 40x40x8 KD0504PDV2-8 KD0504PDB2-8 KD14PDV2-8 KD14PDB2-8 40x40x10 KD14PFVX KD14PFV1 KD14PFV2 KD14PFBX KD14PFB1 KD14PFB2 6.0 4.8 6.5 3.8 0. 0. 0. 0.05 0. 0..5.5 13 13.5.5.5 40x40x KD14PKVX 80 1 7 KD14PKV1 70 0..5 KD14PKV2 60 7.7 KD14PKV3 KD14PKBX 80 1 7 KD14PKB1 70 0. KD14PKB2 60 7.7.5 KD14PKB3 1 45x45x10 KD15PFVX KD15PFV1 KD15PFV2 KD15PFBX KD15PFB1 KD15PFB2 50x50x10 KD15PFVX KD15PFV1 KD15PFV2 KD15PFBX KD15PFB1 KD15PFB2 50x50x10 50x50x15 55x55x10 60x60x10 KD15PFV1.G KD15PFV2.G KD15PFV3.G KD15PFB1.G KD15PFB2.G KD15PFB3.G KD15PHV1 KD15PHV2 KD15PHV3 KD15PHB1 KD15PHB2 KD15PHB3 KD15PFV1.G KD15PFV2.G KD15PFV3.G KD15PFB1.G KD15PFB2.G KD15PFB3.G KDPFV1.G KDPFV2.G KDPFV3.G KDPFB1.G KDPFB2.G KDPFB3.G 60x60x15 KDPHV1 KDPHV2 KDPHV3 KDPHB1 KDPHB2 KDPHB3 60x60x KDPKV1 KDPKV2 KDPKV3 KDPKB1 KDPKB2 KDPKB3 60x60x KDPTV1 KDPTV2 KDPTV3 KDPTB1 KDPTB2 KDPTB3 50 50 00 00 40 00 40 00 40 00 40 00 40 00 30 40 00 30 00 00 1 1 1 1.0 1.0 1 1 1 1 1.5 1 1.5 1 1 2.0 1 2.0 1.0 1 1.0 1 1.3.3 0. 0. 0. 0. 0. 0..5.5.5.5 3.5.5.5.5.5
SUNON Magnetic Levitation System() 2 Phase Half Wave Motor Series xx10 B0503PFB1-8 B0503PFB2-8 B0503PFB3-8 B0503AFB1-8 B0503AFB2-8 B0503AFB3-8 Blower xx10 B0502PFB1-8 1 0 B0502PFB2-8 B0502PFB3-8 B0502AFB1-8 B0502AFB2-8 B0502AFB3-8 1 5 5 0 xx6 (xx7) xx6 (45x42x7) xx6 (50x47x7) 0506VH-8.AC.N 0506VM-8.AC.N 0506BH-8.AC.N 0506BM-8.AC.N 0506VH-8.AD.N 0506VM-8.AD.N 0506BH-8.AD.N 0506BM-8.AD.N 0506VH-8.AF.N 0506VM-8.AF.N 0506BH-8.AF.N 0506BM-8.AF.N 054006VH-8.AE (45x42x7 ) 054006VM-8.AE 054006BH-8.AE 054006BM-8.AE (50x49x7) 054006VH-8.AG 054006VM-8.AG 054006BH-8.AG 054006BM-8.AG 5 5 5 5 5 5 Cap Fan (50x49x7) 50x50x6 (54x53x7) 054506VH-8.AH 054506VM-8.AH 054506BH-8.AH 054506BM-8.AH 06VH-8.AI 06VM-8.AI 06BH-8.AI 06BM-8.AI 5 5 5 5 40 40 5 5 5 0. 0. 5 0. 0..5.5.5.5 Dish Fan xx6 0506VH-8.CB.N 0506VM-8.CB.N 0506BH-8.CB.N 5 100 5 5 100 3 0506BM-8.CB.N 5.5 xx6 xx6 50x50x6 0506VH-8.CB.N 0506VM-8.CB.N 0506BH-8.CB.N 0506BM-8.CB.N 0506VH-8.CB.N 0506VM-8.CB.N 0506BH-8.CB.N 0506BM-8.CB.N 054006VH-8.CA 054006VM-8.CA 054006BH-8.CA 054006BM-8.CA 054506VH-8.CA 054506VM-8.CA 054506BH-8.CA 054506BM-8.CA 06VH-8.CA 06VM-8.CA 06BH-8.CA 06BM-8.CA Certification Safety C US U.S. Patent Number 5 5 5 5 5 5 5 5 40 40 4,787,863 4,987,3 5,093,599 5,5,2 5,7,9 5,492,458 5,5,700 5,584,9 5,582,506 5,666,01 1 5,690,468 5,699,854 5,7,553 5,740,0 396,6 398,393 398,392 399,946 398,977 398,978 396,6 398,393 398,392 398,977 399,946 398,978 400,665 401,686 5,873,406 408,514 5,967,763 5,959,7 5,988,995 5,997,3 4,6 6,0,043 6,050,785 6,1 14,785 6,097,1 6,109,892 6,109,890.5.5.5.5.5.5.5.5.5
Fan Fan 1 Phase Full Wave Motor Series - - Green Motor SUNON Magnetic Levitation System() Size(mm) Model Volt. RPM CFM dba H2O WATTS 40x40x10 GM14PFVX-A GM14PFV1-A GM14PFV2-A GM14PFBX-A GM14PFB1-A GM14PFB2-A Size(mm) Model Volt. RPM CFM dba H2O 40x40x GM14PKVX-A GM14PKV1 -A GM14PKV2 -A GM14PKV3 -A GM14PKBX -A GM14PKB1 -A GM14PKB2 -A GM14PKB3 -A xx10 GM0502PFV1-8 GM0502PFV2-8 GM0502PFV3-8 GM0502PFB1-8 GM0502PFB2-8 GM0502PFB3-8 xx15 GM0502PHV2-8 GM0502PHV3-8 GM0502PHB2-8 GM0502PHB3-8 GM0503PEV1-8 N GM0503PEV2-8 N GM0503PEV3-8 N GM0503PEB1-8 N GM0503PEB2-8 N GM0503PEB3-8 N xx6 xx10 GM0503PFV1-8 GM0503PFV2-8 GM0503PFV3-8 GM0503PFB1-8 GM0503PFB2-8 GM0503PFB3-8 GM0503PHV2-8 GM0503PHV3-8 GM0503PHB2-8 GM0503PHB3-8 xx15 GM05PEV1-8 N GM05PEV2-8 N GM05PEV3-8 N GM05PEB1-8 N GM05PEB2-8 N GM05PEB3-8 N xx6 GM05PFV1-8 GM05PFV2-8 GM05PFV3-8 GM05PFB1-8 GM05PFB2-8 GM05PFB3-8 xx10 GM0504PEV1-8 GM0504PEV2-8 GM0504PEB1-8 GM0504PEB2-8 WATTS xx6 GM0502PEV1-8 N GM0502PEV2-8 N GM0502PEV3-8 N GM0502PEB1-8 N GM0502PEB2-8 N GM0502PEB3-8 N 5 5 5 5 5 5 5 5 5 5 5 5 5 5 xx10 GM0501PFV1-8 N GM0501PFV2-8 N GM0501PFV3-8 N GM0501PFB1-8 N GM0501PFB2-8 N GM0501PFB3-8 N 60x60x10 GMPFV1-A G GMPFV2-A G GMPFV3-A G GMPFB1-A G GMPFB2-A G GMPFB3-A G 50x50x15 GM15PHV1-A GM15PHV2-A GM15PHV3-A GM15PHB1-A GM15PHB2-A GM15PHB3-A 55x55x10 GM15PFV1-A G GM15PFV2-A G GM15PFV3-A G GM15PFB1-A G GM15PFB2-A G GM15PFB3-A G 60x60x15 GMPHV1-A GMPHV2-A GMPHV3-A GMPHB1-A GMPHB2-A GMPHB3-A 60x60x GMPKVX-A GMPKV1-A GMPKV2-A GMPKV3-A GMPKBX-A GMPKB1-A GMPKB2-A GMPKB3-A 60x60x VDC VDC VDC VDC VDC VDC VDC VDC GMPTVX-A GMPTV1-A GMPTV2-A GMPTV3-A GMPTBX-A GMPTB1-A GMPTB2-A GMPTB3-A GM06PTVX-A GM06PTV1-A GM06PTV2-A GM06PTV3-A GM06PTBX-A GM06PTB1-A GM06PTB2-A GM06PTB3-A 50x50x10 GM15PFVX-A GM15PFV1-A GM15PFV2-A GM15PFBX-A GM15PFB1-A GM15PFB2-A 50x50x10 GM15PFV1-A G GM15PFV2-A G GM15PFV3-A G GM15PFB1-A G GM15PFB2-A G GM15PFB3-A G 2.8 2.8 1.9 1.9 2.6 2.6 45x45x10 GM15PFVX-A GM15PFV1-A GM15PFV2-A GM15PFBX-A GM15PFB1-A GM15PFB2-A 0. 0. 80 70 60 80 70 60 1 7.7 1 7.7.5.5 1 7 0. 7 0. 100 100 9.5 11 3.1 3.1 15 2.4 2.4.5.5 4.8 4.8 13 1 6.5 3.8 6.5 3.8 0.05 0.05.5 100 100 0. 0. 15 1 1 0. 0. 5 6 5 6 40 00 40 00.5.5 1 1.5 1 1 00 00 0. 0..5.5.0 1.0 1.5 3 1 1 1 1 40 00 40 00.5.5 2.0 1 2.0 1 40 00 30 40 00 30 3 3.5 0. 0..0.0 1 1.0.0 1 1 00 00 00 00 0. 0. 0. 0. 38.5 3 38.5 3.2.3.2.3.2.3.2.3 1 1.5 0. 0. 1 1 50 50
SUNON Magnetic Levitation System() 1 Phase Full Wave Motor Series - - Green Motor Size(mm) xx10 GB0502AFV1-8 GB0502AFV2-8 GB0502AFV3-8 GB0502AFB1-8 GB0502AFB2-8 GB0502AFB3-8 xx10 GB0503AFV1-8 GB0503AFV2-8 GB0503AFV3-8 GB0503AFB1-8 GB0503AFB2-8 GB0503AFB3-8 xx4.8 GB05ACB1-8 GB05ACB2-8 xx6 GB05AEV1-8 GB05AEV2-8 GB05AEV3-8 GB05AEB1-8 GB05AEB2-8 GB05AEB3-8 xx7 GB05ADV1-8 GB05ADV2-8 GB05ADV3-8 GB05ADB1-8 GB05ADB2-8 GB05ADB3-8 40x40x7 GB0504ADV1-8 GB0504ADV2-8 GB0504ADV3-8 GB0504ADB1-8 GB0504ADB2-8 GB0504ADB3-8 40x40x9 GB0504AFV1-8 GB0504AFV2-8 GB0504AFV3-8 GB0504AFB1-8 GB0504AFB2-8 GB0504AFB3-8 45x45x7 GB0545ADV1-8 GB0545ADV2-8 GB0545ADV3-8 GB0545ADB1-8 GB0545ADB2-8 GB0545ADB3-8 45x45x9 GB0545AFV1-8 GB0545AFV2-8 GB0545AFV3-8 GB0545AFB1-8 GB0545AFB2-8 GB0545AFB3-8 Blower Model Volt. WATTS RPM CFM 1 5 5 1 5 5 5 5 5 0. 5 0. 5 5 5 0. 5 0. 1 5 0. 5 5 0. 0. 0 0. 0 0. 5 5 40 40 00 00 00 00 2 0. 2 0. 2 0. 0.13 2 0. 0.13 4 0. 4 0. 0. 0. 4 4 0. 0..5.5.5 Dish Fan xx6 GC0506VH-8 CB.N GC0506VM-8 CB.N GC0506BH-8 CB.N 5 100 5 5 100 3 GC0506BM-8 CB.N 5.4 xx6 xx6 50x50x6 GC0506VH-8 CB.N GC0506VM-8 CB.N GC0506BH-8 CB.N GC0506BM-8 CB.N GC0506VH-8 CB.N GC0506VM-8 CB.N GC0506BH-8 CB.N GC0506BM-8 CB.N GC054006VH-8 CA GC054006VM-8 CA GC054006BH-8 CA GC054006BM-8 CA GC054506VH-8 CA GC054506VM-8 CA GC054506BH-8 CA GC054506BM-8 CA GC06VH-8 CA GC06VM-8 CA GC06BH-8 CA GC06BM-8 CA xx6 GC0506VH-8 AC.N (xx7) GC0506VM-8 AC.N GC0506BH-8 AC.N GC0506BM-8 AC.N xx6 GC0506VH-8 AD.N (45x42x7) GC0506VM-8 AD.N GC0506BH-8 AD.N GC0506BM-8 AD.N xx6 GC0506VH-8 AF.N (50x47x7) GC0506VM-8 AF.N GC0506BH-8 AF.N GC0506BM-8 AF.N GC054006VH-8 AE (45x42x7 ) GC054006VM-8 AE GC054006BH-8 AE GC054006BM-8 AE GC054006VH-8 AG (50x49x7) GC054006VM-8 AG GC054006BH-8 AG GC054006BM-8 AG (50x49x7) GC054506VH-8 AH GC054506VM-8 AH GC054506BH-8 AH GC054506BM-8 AH 50x50x6 GC06VH-8 AI (54x53x7) GC06VM-8 AI GC06BH-8 AI GC06BM-8 AI 5 5 5 5 5 5 5 5 5 5 5 5 Cap Fan 5 5 5 5 5 5 5 5 40 40.5.5.5.5.5 2.5 5 5 5 5 40 40.5.5.5.5.5.5.5.5 3.5.5 3.5
Worldwide Locations Headquarters: Sunonwealth Electric Machine Industry Co., Ltd. 12th floor, 1 Chung Cheng 1st Road, Kaohsiung, Taiwan, R.O.C. TEL: +886-7-769(41 lines) FAX: +886-7-786 URL: http://www.sunon.com E-mail: sunon@www.sunon.com.tw Sunon Inc. (U.S.A.) 1075 West Lambert Road Suite A, Brea, California 9 U.S.A TEL : +1-714-5-08 FAX :+ 1-714-5-0802 URL : http://www.sunonusa.com E-mail : info@sunon.com Sunon SAS (Europe) Parc Medicis, 66, Ave Des Pepinieres 948, Fresnes Cedex-France TEL : +-1-46154515 FAX : +-1-46154510 URL: http://www.sunon.fr E-mail : info@sunon.fr Sunon German office (Germany) Amsterdamer Strasse 40474 Dusseldorf Germany TEL : +49-1-496-39-39 FAX : +49-1-496-39-40 URL: http://www.sunon.de E-mail : mark.kozdras@sunon.de Sunon Corporation (Japan) Stork Minami Otsuka 4Fl.-1, 2 Chome, Minami Otsuka Toshimaku, Tokyo Japan 0-0005 TEL : +81-3-5395-69 FAX: +81-3-5395-80 URL: http://www.sunon.co.jp E-mail : info@sunon.co.jp Sunonwealth Electric Machine Industry (HK) Ltd. (Hong Kong) 1513 Nan Fung Center, 4 Castle Peak Road, Tsuen Wan, Hong Kong TEL :+ 852--111-388 FAX : +852--050-707 E-mail : info@sunon.com.hk Sunon Technologies Pte Ltd. (Singapore) 10 Toh Guan Road, #03-08 TT International Tradepark, Singapore 608838 TEL : +65-795-00 FAX :+65-795-0600 E-mail : info@sunon.com.sg C 01 Sunonwealth Electric Machine Industry Co., Ltd. All Rights Reserved 01/9/1