Voltage Converters 132 RCD/GPO Inverters 135 Pure Sine Wave Inverters 136 Combi Inverter/Chargers 138 AC to DC Battery Chargers 140 DC to DC Battery Chargers 141 Power Supplies 142 Battery Monitor 144 Battery Separators 143 Hour Meter 145 RustStop 146 Brake Controllers 147 Idle Timers 148 Flasher Units 150
High efficiency & long life. Easy to install. Voltage Converters P5027 ED-DC1224-10 Transient, short circuit, over-voltage & over temperature protected. Multiple ED series units can be installed to modify overall output. P5027M model features radio memory function. NG models & REC2412-30 encapsulated for enhanced resistance to vibration and humidity. NG models & REC2412-30 come with an LED status indicator. 2 year warranty. Approvals : ED Series, P502 Series ED Series C-Tick CE RoHS LED status indicator 131mm 42mm 160 mm 136mm 125mm 72mm 60mm 32mm 103mm 150mm Ø 4mm VR9-5C NGVR11 Voltage Converters Multi Circuit Part No. Function Input Voltage Output Voltage Circuits Power Rating (W) Weight (kg) VR9-5C Reducer 24 12 5 480 0.5 NGVR11 Reducer 24 12 4 450 0.4 For use with incandescent and LED lighting only. 132
74mm 74mm 158mm 38mm 38mm 77mm 38mm 38mm 77mm 38mm 38mm 77mm 88mm Fig 1 80mm Fig 2 165mm Fig 3 291mm 47mm Ø 6mm 122 mm 306mm 160 mm 166mm 70mm 175mm 32mm Ø 4mm 60mm 72mm 125mm 135mm 49mm 58mm 87mm 118mm 233 mm Fig 4 Fig 5 150mm Fig 6 Fig 7 230mm Voltage Converters Part No. Function Input Voltage Output Voltage Circuits Current Rating (A) Weight (kg) Fig P5027M Reducer 15 38 13.2 1 10 0.2 1 P5027 Reducer 15 38 13.2 1 10 0.2 2 VR4 Reducer 20 30 13.5 1 14 1.0 4 P5028 Reducer 18 38 13.2 1 20 0.3 3 ED-DC2412-20 Reducer 20 30 13.8 1 20 0.5 5 REC2412-30NG Reducer/Equaliser 22 30 15 1 40 0.6 6 REC1260 Reducer/Equaliser 22 30 15 1 60 2.6 7 ED-DC1224-10 Doubler 9 18 25 1 10 0.5 5 NGBC2420 Doubler/Equaliser 11.5 15.5 29.2 1 20 0.6 6 133
176 mm 87mm 58mm 49mm 168mm Voltage Converters Galvanic Isolation Part No. Function Input Voltage Output Voltage Circuits Current Rating (A) Weight (kg) ED-DC1212-15G Equaliser 9 18 12.5 1 15 0.6 ED-DC2424-7.5G Equaliser 20 35 24 1 7.5 0.6 ED-DC1224-7.5G Doubler 9 18 24 1 7.5 0.6 Isolated Voltage Converter Isolated voltage converters (also known as Galvanic Isolated) provide full dielectric isolation (no electric contact) between input and output circuits by means of a high frequency converter, which may be a safety requirement for certain applications. Isolated units also have strong noise and interference blocking capabilities thus providing a cleaner DC source for sensitive loads. Typical applications requiring isolated voltage converters are Communications, Entertainment & Navigation Systems, Forklifts etc. 134
AS/NZ 4763-2011 approved portable inverter. Pure sine wave output. RCD switch with M.E.N. ensures work place safety. High surge capacity. Transient, short circuit, over-voltage & over temperature protected. Audio alarm & warning/error codes for easy diagnosis. Remote switch panel included. 2 year warranty. Ideal for telecommunication, emergency, council vehicles, caravan, camper tailer & marine applications. Input Voltage : 10.5 15.5VDC AC Output : 230VAC 50Hz General Power Outlet : 2 Cable Length : Remote Panel 6m Approvals : CE, C-Tick & e marked Operating Temperature : 0 C to 40 C ED-IV1012R RCD/GPO Inverters 229mm Ø 5.5mm Double pole dual GPO (General Power Outlet) RCD (Residual-Current Device) Safety Switch 208mm 112mm 228mm ED-IV1012R 521mm Remote switch panel with 6m cable 267mm Ø 5.5mm 280mm 285mm ED-IV1012R ED-IV2012R 52mm Ø 3.6mm 130mm 50mm Remote Switch 621mm 64mm RCD/GPO Inverters Part No. Output Power (W) Output Current (A) Weight (kg) ED-IV1012R 1000 4.3 5.5 ED-IV2012R 2000 8.7 8.5 135
Pure sine wave output. Pure Sine Wave Inverters ED-IV1012 ED-IV1824 Light & compact. High surge capacity. Transient, short circuit, over-voltage & over temperature protected. Audio alarm & warning/error codes for easy diagnosis. 12V & 24V models available. Australian general power outlets on 12V models. 12V models include a 5V USB port. 24V models feature LCD panel for control and monitoring. 12V models include remote switch panel. 2 year warranty. Input Voltage : 12V Models 10.5 15.5VDC 24V Models 20 32VDC AC Output : 230VAC 50Hz USB Output : 12V Models 5V 750mA Approvals : CE, C-Tick & e marked Operating Temperature :12V Models 0 C to 40 C 24V Models 0 C to 60 C Pure Sine Wave Pure sine wave inverters produce current that is close to grid AC output. There are many advantages to pure sine wave inverters over others: Reliably powers devices that will not work with modified sine wave inverters. Very low harmonic distortion and clean power similar to utility supplied electricity. Inductive loads like microwaves and motors run faster, quieter and cooler. Reduces audible and electrical noise in fans, fluorescent lights, audio amplifiers, TV, fax and answering machines. Prevents crashes in computers, weird print outs and glitches in monitors. 136
ED-IV2012 Australian GPO 52mm Ø 3.6mm 50mm 64mm Remote Switch Panel 5V USB charging port Remote switch panel with 6m cable 148mm 261mm 353mm ED-IV4012 ED-IV1012 ED-IV2012 Pure Sine Wave Inverters 12V Part No. Output Power (W) Output Current (A) Outlet Weight (kg) ED-IV4012 400 1.74 1 1.7 ED-IV1012 1000 4.3 1 2.9 ED-IV2012 2000 8.7 2 5.5 73mm Ø 6.5mm LCD control panel 115mm 265mm 280mm 160mm 90mm 177mm 160mm 90mm 177mm 215mm 110mm 230mm 200mm 325mm 416mm 390mm Pure Sine Wave Inverters 24V Part No. Output Power (W) Output Current (A) Outlet Weight (kg) ED-IV1024 1000 4.3 1 7.0 ED-IV1824 1800 7.8 1 7.5 137
Combi Inverter/Chargers ED-IVC3012 Configurable DC to AC power inverter, battery charger and transfer switch all in one. Pure sine wave output. Robust industrial design. High surge capacity. LCD remote control panel & temperature sensor included. Transient, short circuit, overvoltage & over temperature protected. Automatic standby function to reduce no-load consumption. Configurable alarm relay. 2 year warranty. Ideal for service vehicles, solar power systems, trailer homes, industrial systems and marine applications. Input Voltage : 12V Models 10.5 16VDC 24V Models 21 32VDC AC Output : 230VAC 50Hz Approvals : C-Tick, IEC 60335-2-29 Operating Temperature : -20 C to 50 C The Combi Inverter/Charger is an all in one combination of a DC to AC true sine wave inverter, an advanced multi-stage battery charger and a high speed AC transfer switch. All this is built into one compact and easy to install enclosure. DC to AC true sine wave inverter Advanced multi-stage battery charger High speed AC transfer switch Uninterruptible Power Supply The main task of the Combi Inverter/Charger is to act as an uninterruptible AC power supply (UPS). In case of a grid/generator failure or disconnection, the Combi Inverter/Charger immediately stops charging the battery, releases the AC transfer switch and activates the inverter which takes over the supply to the connected loads. All this is achieved so fast, even critical loads such as computers will continue to operate without problem. Upon reconnection of the grid/generator, and if the voltage and frequency are within acceptable limits, the Combi Inverter/ Charger activates the AC transfer switch and battery charger again, while deactivating the inverter. The connected loads are now supplied again by the grid/generator without interruption. 138
Remote control LCD panel for comprehensive feedback & control ED-IVC3012 Temperature sensor with 3m cable 210mm 114mm 431mm 132mm 130mm 36mm 351mm 70mm 370mm Remote Control Panel Fig 1 Fig 2 Combi Inverters/Chargers Part No. Model Output Power (W) Output Current (A) Weight (kg) Fig ED-IVC1612 12V 1600 60 10.7 1 ED-IVC3012 12V 3000 120 19.0 2 ED-IVC1824 24V 1800 35 10.7 1 ED-IVC3524 24V 3500 70 19.0 2 139
AC to DC Battery Chargers ED-3REM ED-BC4012 Selectable outputs for different battery types. 4 stage charging controls: Bulk Absorption Float Maintenance. Adjustable control of output current via front keypad. Priority charge function on bank 1. Selectable Night Mode for silent operation. Optional LCD panel for remote control and monitoring. Transient, short circuit, over-voltage & over temperature protected. 12V & 24V models available. 2 year warranty. Input Voltage : 90 265VAC Frequency : 50 60Hz Output Circuits : 3* Battery Types : Flooded, Lithium, AGM/GEL Approvals : C-Tick, AS/NZS 60335.2.29 Operating Temperature : -20 C to 60 C *1 fully independent, 2 common with diode isolation 3 output banks with priority charge function on bank 1 Optional LCD panel for remote control and monitoring ED-BC4012 207mm 207mm Ø 4mm 190mm 100mm Ø 4mm 190mm 86mm 100mm 92mm Ø 4mm 145mm 295mm 200mm 355mm 100mm 29mm 92mm 82mm Fig 1 Fig 2 Fig 3 AC to DC Battery Chargers Part No. Model Output Current (A) Output Voltage (DC) Min Max Weight (kg) Fig ED-BC2012 12V 20 14.2 15.5 2.4 1 ED-BC3024 24V 30 28.4 31.0 4.0 2 ED-BC4012 12V 40 14.2 15.5 2.6 1 ED-BC6012 12V 60 14.2 15.5 4.0 2 ED-3REM Optional LCD remote panel with 7.3m cable 3 140
Multi-stage charging controls. Transient, short circuit, over-voltage & over temperature protected. Compatible with flooded cell, lithium and AGM/GEL batteries. NGBC series & REC2410-30NG encapsulated for enhanced resistance to vibration and humidity. LED status indicator supplied with select models. BC-2412-10 incorporates internal resettable fuse. ED-DCBC3012 features solar input capability. ED-DCBC3012 includes temperature sensor for more accurate battery charging. 2 year warranty. Output Circuits : 1 Inputs : BC, REC & NGBC 1 x Battery ED-DCBC3012 1 x Battery & Solar Battery Types : Flooded, Lithium, AGM/GEL Approvals : C-Tick Operating Temperature : -20 C to 60 C ED-DCBC3012 NGBC2420 DC to DC Battery Chargers Temperature sensor with 7.5m cable LED status indicator (NGBC2420, NGBC1222-1, REC2412-30NG) 114mm 70mm 154mm 72mm 63mm 32mm 306mm 91mm 136mm 59mm 72mm 160mm 60mm 177mm 166mm 118mm 238mm 124 mm Ø 6mm 150mm Ø 4mm 230mm 168mm Fig 1 Fig 2 Fig 3 Fig 4 DC to DC Battery Chargers Part No. Output Current (A) Input Voltage (DC) Output Voltage (DC) Min Max Weight (kg) Alternate Functions Fig BC-2412-10 10 24 13.6 14.4 0.7 1 NGBC2420 15* 11.5 15.5 26.4 29.2 0.6 Voltage Doubler 2 NGBC1222-1 22 11.5 15.5 13.2 14.4 0.6 2 REC2412-30NG 40 22 30 10 15 0.6 Voltage Reducer/Equaliser 2 REC1260 60 22 30 10 15 2.6 Voltage Reducer/Equaliser 3 ED-DCBC3012 30/20/10/5** 12/24 13.8 15.5 1.8 4 * 20A in Doubler Mode. ** User selectable. Alternate functions must be set prior to installation. 141
Power Supplies RPS3078 Regulated output voltage. Light & portable. Internal cooling. LED status indicators. Transient, short circuit, over-voltage & over temperature protected. RPS3800 features adjustable output voltage. RPS3800 EMC : RPS12-5 EN55022-B Operating Temperature : 0 C to 80 C RPS12-5 RPS3078, RPS3079 102mm 172mm 168mm 209mm 67mm 75mm 76mm 85mm LED status indicators Adjustable output voltage RPS3800 150mm 195mm 56mm 68mm Power Supplies Part No. Output Current (A) Input Voltage (AC) Output Voltage (DC) Weight (kg) RPS12-5 2 240 13.8 1.7 RPS3078 0 20 220 240 13.8 1.3 RPS3079 0 12 220 240 13.8 1.3 RPS3800 15 17.4 90 125 / 200 240 0 24* 1.1 * User selectable. 142
Microprocessor-controlled battery isolators designed for use in multi-battery applications. Cost-effective protection against flat battery. Intelligent battery monitoring to prevent unwanted switching. Starter battery priority. No voltage loss. Surge-protected. 2 year warranty. Ideal for service vehicles, solar power systems, caravans, RVs, trailer homes, industrial systems and marine applications. Voltage : ED-VSR 12V/24V 1315-200 12V Approvals : ED-VSR C-Tick Operating Temperature : ED-VSR -10 C to 40 C 1315-200 -40 C to 60 C ED-V24-160 ED-VSR1224-140 Battery Separators 46mm Ø 6mm 72mm 8mm 6.3mm 51mm Ø 8mm 6mm 78mm 46mm 88mm 6.3mm 51mm 6.3mm 58mm Ø 6.5mm 108mm 103mm 102mm 7mm 83mm ED-VSR1224-140 ED-VSR1224-160 1315-200 Battery Separators Part No. Current Rating (A) Off Volts On Volts Inrush Continuous @12V @24V @12V @24V Weight (kg) ED-VSR1224-140 140 12.8 25.6 13.2 26.4 0.1 ED-VSR1224-160 480 160 12.8 25.6 13.2 26.4 0.5 1315-200 600 200 12.8 13.2 1.0 143
Battery Monitor Displays voltage, current, consumed amp hours & remaining battery capacity. 2 battery inputs. Configurable alarm relay. 500A shunt included. Ideal for service vehicles, forklifts, solar power systems, trailer homes, industrial systems and marine applications. 2 year warranty. Voltage : 9 35V Weight : 145g Voltage Display : Main 0 to 35VDC Auxiliary 2 to 35VDC Current Display : -999 to 999A Battery Capacity Display : 20 to 999Ah Approvals : RoHS Operating Temperature : -20 C to 50 C Battery Status Cycle between 4 status screens providing a comprehensive understanding of the battery condition. 500A shunt included Display battery voltage to within 0.1V Displays Amp-hours remaining in battery (up to 999Ah) 64mm 78mm Ø 52mm 72mm Battery % remaining until fully discharged Net charge/discharge current going into or out of the battery (up to 500A) Battery Monitor Kit Part No. ED-EN55010 144
Sealed case. Multi-voltage operation. Transient voltage and reverse polarity protected. Glass lens. Aluminium bezel. 6 digits. Running indicator. 4mm numeral height. Shock & vibration resistance. Quartz accuracy. Made in the USA. Voltage : 10 80V Current Draw : 0.16A Shock : 55G Vibration : 20G max. rms 10 80Hz Case : Black Polymer Bezel : Black Anodised Aluminium Lens : Glass Wire Length : 390mm Type : Electromechanical Accuracy : +/- 0.02% Operating Temperature : -40 C to 85 C Approvals : CE Marked, RoHS Hour Meter 60mm 61mm 39mm Ø 50.8mm Panel Cutout 6.3mm Hour Meter Part No. Digits IHM01 6 145
RustStop Cost-effective, long lasting & environmentally safe electronic rust protection. 12V and 24V models available. 4 LED status indication lights operation, faulty, inspection and low battery. Effective in both wet and dry conditions. Low current draw. Simple installation attach onto vehicle panel with supplied high-bonding open-cell tape. Suitable for new and used vehicles. Housing : Flame Retardant ABS Output Voltage : 40 45V Current Draw : 10 35mA Approvals : C-Tick 113mm 21mm 68mm RS5-12HD Electronic Rust Protection For rust to form, there needs free-electrons, moisture and oxygen present. If any of these are missing, rust cannot form. RustStop provides strong positive charge to the vehicle, causes an attraction of negative free-electrons away from the vehicle toward anodes, the anodes now corrode rather than the vehicle. This reduces the rusting process on the vehicle. RustStop Kit Part No. Voltage No. of Anodes Weight (kg) RS5-12HD 12 4 0.5 RS5-24HD 24 6 0.6 RS-ANODE Anode replacement kit 2 plates 146
Microprocessor technology no time delay. 12V and 24V models available. Incorporates over-ride function for manual control. In-cab control & indication. 2 axle 12A output capability. EBC series plug & play installation. Detachable mounting bracket. 2 year warranty. EBC-24 RBC-12 Brake Controllers Approvals : RBC C-Tick 81mm 82mm 128mm 43mm 76mm 35mm 79mm 41mm EBC-12, EBC-24 RBC-12, RBC-24 Brake Controllers Part No. Voltage Axles Weight (kg) EBC-12 12 2 0.3 EBC-24 24 2 0.3 RBC-12 12 2 0.2 RBC-24 24 2 0.2 147
Idle Timers IT11450 Energise to run or stop models. Remote face on selected models. Multiple mounting options. Gauge mount models feature 30A switching capacity via serviceable external relay. Multi-voltage. Vehicle specific pre-terminated models available on request, lead times apply. BES-925/ST-1 Voltage : 12 24V Current Rating : 10A max. Approvals : Adjustable IONNIC CE, C-Tick Ingress Protection : Adjustable IONNIC IP65 109mm Ø 6.5mm 52mm 79mm 119mm 64mm Illuminated push button switch (Red) Illuminated pilot light (Amber) IT10451 IT11451 Engraved label Adjustable IONNIC Part No. Outputs Energise to Time Intervals Park Brake Override Description IT11450 1 Run 1 to 12 min, 1 min increment Yes Idle timer controller unit only IT10451 Harness with stainless steel illuminated push button switch & engraved label 1.8m IT11451 Harness with toggle switch, boot & pilot light 1.8m IT10452 Idle Timer kit push button switch Kit contains: 1 x IT11450, 1 x IT10451 IT11452 Idle Timer kit toggle switch Kit contains: 1 x IT11450, 1 x IT11451 148
29mm 130mm Ø 8mm 91mm 50mm 24mm 25mm Remote Face Adjustable Remote Face Part No. Outputs Energise to Time Intervals (min) Park Brake Override Description BES-925/ST-1 1 Run 0.5, 1, 2, 3, 4, 5 Yes Non-electronic engine management BES-925/ST-3 2* Run 0.5, 1, 2, 3, 4, 5 Yes Non-electronic engine management BES-925/ST-4 1 Run 0.5, 1, 2, 3, 4, 5 Yes Electronic engine management BES-925/ST-5 2 Run 0.5, 1, 2, 3, 4, 5 Yes Electronic engine management CTR-M 1 Stop 0.5, 1, 2, 3, 4, 5 No Electronic engine management * Second output used to isolate power to EDIC (shutdown) motor during idle period. 29mm 130mm Ø 8mm 50mm Illuminated push button switch for manual stop override, mounts in supplied bracket Adjustable X-Series Part No. Outputs Energise to Time Intervals Park Brake Override Description BES-X104 1 Run 30 sec to 30 min Yes Suitable for both electronic BES-X105 2 Run 30 sec to 30 min Yes & non-electronic engine management 112mm 52mm 58mm Fixed Gauge Mount Part No. Outputs Energise to Time Intervals (min) Park Brake Override Description CST500 1 Run Fixed @ 5 No Relay driven output CST515 1 Stop Fixed @ 5 No Relay driven output 149
C HD12 Suitable for flasher & hazard light, LED & incandescent applications. Flash rate is not influenced by load variation. Flasher Units HD12-LED 80mm 47mm 47mm 70mm 28mm 37mm 70mm 28mm 37mm 34mm 70mm 36mm 36mm (49a) (+49) (49a) (C) (+49) (49a) (+49) (31) (49a) (+49) 98mm (30b) (49a) (49) (31) (c2) (C) HD12 HD13 HD12-LED HD13-LED HD26 Flasher Units Part No. Voltage No. of Terminals (6.3mm) Side Repeater Lamps Indicator Lamps Max. Load (W) Bulb Failure Indicator HD12 12 2 None 1 to 6 x 25W 210 No HD13 12 3 None 1 to 10 x 21W 210 Yes HD12-LED 12 2 1 x 5W 1 x 21W & 1 LED Cluster 30 Yes HD13-LED 12 3 1 x 5W 1 x 21W & 1 LED Cluster 30 Yes HD26 24 6 None 4 x 21W & 2 x 21W 170 Yes 150