MP-1070BS Metering Systems Parts List 6 Model T-35 and T-57 Mark II Turbo-Meter with Blade Tip Sensors Parts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures: 175, 275, 720, 1440 psig NOTE: This parts list applies to Mark II Turbo-Meters with Blade Tip Sensors only. To identify parts for non-blade tip sensor units, refer to Invensys Metering Systems Bulletin MP-1070B. Copyright 2001 Invensys Metering Systems
GENERAL ASSEMBLY Body Assembly, Aluminum, 175# with Badges Less Nosecone 00624-611-20 Body Assembly, Cast Steel 275# with Badges Less Nosecone 00624-611-21 1 1 Body Assembly, Cast Steel 720# with Badges Less Nosecone 00624-611-60 Body Assembly, Cast Steel 1440# with Badges Less Nosecone 00624-611-90 Body Assembly, Cast Steel 1440# with Ring Joint Flanges 00624-611-91 and Badges Less Nosecone 2 1 Nosecone w/straightening Vanes 175# 00624-305-21 Nosecone w/straightening Vanes HP 00624-305-91 3 3 #8-32 x 3/8 Lg Sta Stl Truss Hd Scr 950426 Body Badge 175# T-35 00624-073-20555 Body Badge 275# T-35 00624-073-30555 Body Badge 720# T-35 00624-073-60555 4 1 Body Badge 1440# T-35 00624-073-90555 Body Badge 175# T-57 00644-073-20555 Body Badge 275# T-57 00644-073-30555 Body Badge 720# T-57 00644-073-40555 Body Badge 1440# T-57 00644-073-50555 5 4 #4 x 3/16 Lg Brass Drive Screw 903004 O-Ring Top Pl to Body Buna 175# 934346 *6 1 O-Ring Top Pl to Body Viton 175# 906743 O-Ring Top Pl to Body Buna HP 950190 O-Ring Top Pl to Body Viton HP 906744 2 NOTE: HP designates 275, 720, and 1440 working pressures. 7 2 Steel Pipe Plug 1/4-18 NPT 906055 8 1 45 Sta Stl Street Ell All Pressures 950762 9 1 1/4 Steel Nipple 720# & 1440# 950760 1/4 Hex Brass Nipple 175# 904765 10 1 Inlet Badge (Body) 01516-090-02 11 2 #2 x 1/8 Lg Brass Drive Screw 903003 7 1/2-13 x 1-1/2 Lg Hex Hd Scr 175# 910107 12 7 1/2-13 x 1-3/8 Lg Hex Hd Scr 275# 935647 13 3/4-10 x 2-1/2 Lg Hex Hd Scr 1440# 935680 1 1/2-13 x 1-1/2 Lg Hex Seal Scr 175# 00624-056-01 13 1 1/2-13 x 1-3/8 Lg Hex Seal Scr 275# 00624-056-02 1 3/4-10 x 2-1/2 Lg Hex Seal Scr 1440# 00624-057-91 14 1 Stuffing Box Cover 22516-131-01 15 1 Lubrication Fitting 00624-145-00 16 1 Hex Pipe Bushing 950195 17 1 1/4 Valve HP950710 1/4 Valve 175# 950428 *18 1 Index Plate Gasket 00624-160-03 19 2 #8-32 x 3/16 Lg Rnd Hd Scr 914450 20 2 Vent Cap 00624-505-01 21 1 Coupling Shaft 175# 00624-345-20 Coupling Shaft All HP 00624-345-90 *22 1 Magnet Well and Post Assy 175/275# 00624-244-20 Magnet Well and Post Assy 720/1440# 00624-244-90 *Recommended Spare Parts
32 33 32 47 34 58 74 69 62 60 61 50 49 48 75 63 41 72 73 54 72 70 51 39 40 56 55 57 54 46 42 35 77 76 37 36 38 59 30 71 43 68 67 65 66 44 45 COMPLETE INTERNAL HOUSING Intermediate Gear Assy 100 CF/REV 00624-212-40 *23 1 Intermediate Gear Assy 1000 CF/REV 00624-212-21 Intermediate Gear Assy 1.0 CuM/REV 00624-212-22 Intermediate Gear Assy 1 CuM/REV 00624-212-41 24 1 Index Shaft Gland 00624-023-01 25 1 Index Plate Assembly w/slot Sensor 00624-504-23 Index Plate Assembly w/o Slot Sensor 00624-504-21 26 1 Index Plate w/slot Sensor 00624-004-23 Index Plate w/o Slot Sensor 00624-004-21 27 1 Internal Mech Badge T-35 00624-073-45555 Internal Mech Badge T-57 00654-073-32555 28 4 0 x 1/8 Lg Rnd Hd Brass Drive Screw 903001 Top Plate Assembly 175# WP 00624-303-81 29 1 Top Plate Assembly 275# WP 00624-303-84 Top Plate Assembly 1440# WP 00624-303-83 Comp Intl Hsg Assy T-35 175# WP 00624-302-27 Comp Intl Hsg Assy T-35 275/1440# WP 00624-302-08 Comp Intl Hsg Assy T-57 175# WP 00654-302-08 30 1 Comp Intl Hsg Assy T-57 275/1440# WP 00654-302-16 Comp Intl Hsg Assy T-35 175# WP 00624-302-29 Comp Intl Hsg Assy T-35 275/1440# WP 00624-302-10 Comp Intl Hsg Assy T-57 175# WP 00654-302-10 Comp Intl Hsg Assy T-57 275/1440# WP 00654-302-18 Measuring Module, Contact 31 1 All Pressures T-35 and T-57 Equimeter Sales Buna/Viton Seals Representative 32 1 Internal Hsg and Adapter Plate Assy Includes Items 33, 34, 35 00624-202-24 33 1 Internal Housing 00624-002-23 34 1 Retaining Ring 904435 35 1 Adapter Plate and Bushing Assembly 00622-262-01 36 A/R Sensor Coil Retainer 00651-040-02 37 A/R #8-32 x 3/8 Lg Sta Stl Fil Hd Scr 903371 VITON BUNA 38 1 Sensor Coil Feedthru Assemby Buna 951253 Sensor Coil Feedthru Assembly Viton 00632-317-03 39 1 Internal Housing Plate Assembly Includes 45, 70, 71 00624-210-20 40 1 Internal Housing Plate 00624-010-21 41 1 29 Tooth Drive Gear T-35 00624-429-29 21 Tooth Drive Gear T-57 00654-429-21 *42 1 Seal Buna Hsg Plate 1191301 Seal Viton Hsg Plate 906962 *43 1 Seal Buna Brg Brkt 1191302 Seal Viton Brg Brkt 906963 44 2 #10-24 x 3/4 Lg Sta Stl Rnd Hd Scr 905549 45 2 #10 Sta Stl Ext Tooth Lockwasher 904016 46 1 Bearing Bracket And Pin Assembly 00624-209-23 47 1 Rotor And Insert Assembly T-35 00624-250-91 Rotor And Insert Assembly T-57 00654-250-91 48 1 Rotor End Bearing Retainer 00624-117-22 49 2 #4-40 x 3/8 Lg Sta Stl Fil Hd Scr 903340 50 2 #4 Lockwasher 950078 51 1 Outlet End Bearing Retainer 00632-117-01 52 1 Gear Post 00631-028-00 53 1 Gear Retainer 00624-080-00 54 1 Oil Reservoir Cover Plate 00624-079-01 55 1 Worm 00626-017-80 56 1 Wormwheel 00624-035-00 57 1 Wormwheel Collar 00624-070-02 58 1 Wormwheel Shaft 00624-046-20 O-Ring Buna Feedthru 946861 59 1 O-Ring Viton Feedthru 902418 O-Ring Viton Feedthru -40 950774 60 1 Rotor Locknut 906180 61 1 Rotor Locking Pin 006-24-069-00 62 1 Spherical Washer Set 906179 63 1 44 Tooth Slotted Gear T-35 00631-344-44 52 Tooth Slotted Gear T-57 00634-344-52 *64 1 Incl 46 Thru 58, 60, 61, 62, 63, 65 Thru 75 Rotor, Bracket and Wormwheel Assy T-35 00624-309-26 Rotor, Bracket and Wormwheel Assy T-57 00654-309-26 3 *Recommended Spare Parts
83 84 24 85 87 TOP PLATE SECTION 79 59 59 38 INDEX SHAFT AND GLAND ASSEMBLY 86 88 78 24 25 26 81 82 INDEX PLATE ASSEMBLY 80 18 SELF ADHESIVE WIRING LABEL 80 65 2 Filter Screen 00622-083-01 66 2 Filter Screen Retaining Ring 904419 67 2 Wormwheel Shaft Bearing 908660 68 2 Wormwheel Shaft Bearing Retainer 00622-117-01 69 1 Rotor End Rotor Shaft Bearing 950277 70 1 Outlet End Rotor Shaft Bearing 950236 71 5 6-32 x 5/32 Lg Set Screw 950375 72 7 4-40 x 1/4 Lg Sta Stl Rnd Hd Screw 903025 73 4 4-40 x 1/8 Lg Sta Stl Rnd Hd Screw 907401 74 2 Oiler Felt 1191430 75 1 Rotor Shaft 00624-024-21 76 A/R Oil Tubing 99993 77 2 Compression Ring Oil Tubing 950682 78 1 #8-32 x 3/8 Lg Sta Stl Fil Hd Screw 903371 79 1 #8 Plain Sta Stl Washer 950448 80 1 Self Adhesive Wiring Label 00651-105-01 81 3 5/16-18 x 3/4 Lg Hex Cap Screw 910028 82 1 5/16-18 x 3/4 Lg Hex Seal Cap Screw 00265-057-02 83 1 Top Shaft Dog Shear Pin 00624-056-00 84 1 Top Index Shaft Dog 00624-061-04 85 1 Index Shaft 00624-054-03 86 1 Bottom Index Shaft Dog 00624-071-00 87 1 Index Drive Shaft Assy Includes 88, 89, 90 00624-554-01 88 2 8-32 x 3/4 Lg Hex Hd Screw (Adapter Plate) 906178 4
102 100 122 114 103 23 89 90 91 93B 93A 93E 93F 93 93C 93D 118 119 120 121 100 101 117 99 98 97 92 93 FOLLOWER MAGNET ASSEMBLY 29 104 22 95 94 96 TOP PLATE MECHANICAL AND ELECTRICAL COMPONENTS 89 1 Intermediate Gear Output Dog 00266-071-03 90 1 #4-40 Sta Stl Hex Nut 907639 91 A/R #8-32 x 3/8 Lg St Stl Fil Hd Scr 903371 92 1 Intermediate Gear Input Dog 00624-061-20 *93 1 Follower Magnet Assembly w/slot Sensor Incl 93A, B, C, D, E, F 00624-313-22 Follower Magnet Assembly w/o Slot Sensor Incl 93A, B, C, D 00624-313-20 93A 1 Spacer 00624-106-20 93B 1 Retaining Ring 904691 93C 2 Bearing 905462 93D 1 Magnet Holder w/magnet 00624-213-20 Magnet Holder w/magnet w/slot Sensor 00624-013-21 93E 2 3-48 x 1/8 Lg Sta Stl Fil Hd Scr 903337 93F 1 Slot Sensor Chopper Disc 00624-108-02 *94 1 Driver Magnet Well Seal Buna 904214 Driver Magnet Well Seal Viton 906736 *95 1 Driver Magnet Well O-Ring Buna 950193 Driver Magnet Well O-Ring Viton 908264 96 2 Bushing 00622-113-00 97 A/R Solder 750155 98 A/R Shrink Tube 800633 99 2 Standoff 951256 100 A/R #8 Lockwasher 950371 101 4 #8-32 x 1-1/2 Lg St St Fil Hd Sc 919711 102 4 #8-32 x 1/4 Lg St St Rnd Hd Sc 903055 103 A/R Dual Channel Signal Conditioner 951232 Single Channel Signal Conditioner 951233 Blank Top Plate 175# 00626-003-18 104 1 Blank Top Plate 275# 00626-003-34 Blank Top Plate 720#/1440# 00626-003-88 5 *Recommended Spare Parts
29 110 106 105 90 111 112 ELECTRONICS CONNECTION HOLE CAP AND SCREWS 89 109 108 100 91 107 47 61 75 46 62 60 63 71 58 41 52 54 73 67 56 57 71 105 1 Large Change Gear XX = Gear Blank Diameter YY = No. of Teeth 00624-3XX-YY 106 1 Small Change Gear XX = Gear Blank Diameter YY = No. of Teeth 00624-3XX-YY 107 1 Signal Conditioner Mounting Brkt 00651-048-00 108 AR #8-32 x 3/8 Lg St Stl Pan Hd Scr 950839 109 AR #8-32 Sta Stl Hex Nut 903924 110 1 Probe Mounting Hole Cap 00624-129-00 111 3 1/4-20 x 5/8 Lg Sta Stl Soc Hd Cap Scr 908179 112 3 1/4 Sta Stl Lockwasher 904030 *113 1 Magnet Holder And Bearing Assembly Incl 113A, B, C, D 00631-334-00 113A 1 Magnet Holder And Groove Pin w/magnet 00631-234-02 113B 2 Bearing 905462 113C 1 Spacer 00622-106-03 113D 1 Retaining Ring 904691 *Recommended Spare Parts ROTOR TO SHAFT ASSEMBLY 68 72 67 ROTOR, BRACKET AND WORMWHEEL ASSEMBLY (VIEW FROM INLET END) 113D 113B 113C 113B 113A 113 DRIVER MAGNET HOLDER ASSEMBLY COUPLING SHAFT 21 6
36 38 122 102 115 118 114 117 101 121 116 103 119 120 ELECTRICAL AND MISCELLANEOUS COMPONENTS 114 1 Plug-in Connector Manifold 00651-122-05 115 1 Sensor Coil Assembly Wh/Br 951236 Sensor Coil Assembly Red/Blk 951237 116 1 5/16-18 x 3/8 Lg Socket Set Screw 906220 117 1 Plug-in Adapter 00661-122-00 118 A/R Plug-in Connector Gasket 905321 119 A/R Six Socket Plug-in Cable Con Plug 951245 120 1 Four Wire Conduit Adapter Assy 00661-330-00 121 A/R Main Sensor Plug-in 00661-101-00 Redundant Sensor Plug-in 00661-101-01 122 A/R Plug-in Connector Cap And Chain 00632-131-00 4 Oz. Oil Bottle 00622-405-01 1 Gallon Can Oil 00622-405-02 Hand Lube Gun 00625-400-00 7
Invensys Metering Systems 805 Liberty Boulevard, DuBois, PA 15801 (814) 371-8000 FAX (814) 375-8460 www.energymetering.invensys.com Representatives in all principal cities. Distributors throughout the world. Metering Systems Invensys Metering Systems 805 Liberty Boulevard P.O. Box 528 DuBois, PA 15801 Authorized Distributor: NUPP 2/015M PRINTED IN U.S.A. LIMITED WARRANTY Seller warrants the Goods to be free from defects in materials manufactured by Seller and in Seller s workmanship for a period of [one (1) year] after tender of delivery (the Warranty Period ). THIS LIMITED WARRANTY (a) IS IN LIEU OF, AND SELLER DISCLAIMS AND EXCLUDES, ALL OTHER WARRANTIES, STATUTORY, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR- TICULAR PURPOSE, OR OF CONFORMITY TO MODELS OR SAMPLES; (b) does not apply to any Goods which have been (i) repaired, altered or improperly installed; (ii) subjected to improper use or storage; (iii) used or incorporated with other materials or equipment, after Buyer or anyone using the Goods has, or reasonably should have, knowledge of any defect or nonconformance of the Goods; or (iv) manufactured, fabricated or assembled by anyone other than Seller; (c) shall not be effective unless Buyer notifies Seller in writing of any purported defect or nonconformance within [thirty (30) days] after Buyer discovers or should have reasonably discovered such purported defect or nonconformance; and (d) shall only extend to Buyer and not to any subsequent buyers or users of the Goods. Buyer shall provide Seller access to the Goods as to which Buyer claims a purported defect or nonconformance; upon request by Seller, Buyer shall, at its own risk and expense, promptly return the Goods in question to Seller s Plant.