New Additional Stabilizers The new additional stabilizers are adapted optimally to the demands of PALFINGER and developed in close cooperation with the dealers. A variety of improvements make the stabilizers to an ideal accessory in combination with a PALFINGER crane. An optimum power to weight ratio due to the finit elements calculation and the use of high quality steel increases the possible pay load and minimizes the fuel consumption. The improved mounting possibility as well as an included terminal box saves assembly times and facilitates installation. Up to 50% improved support moment Protected hoses and cables due to inside mounting Maintenance free outrigger system Integrated return oil utilisation High quality KTL coating prevents corrosion An adjustment up to 100 mm in support height of the is possible Versions of mounting the stabilizers: A: Mounting above the vehicle frame B: Mounting below the vehicle frame BS00X-SA-A: All options listed below are selectable seperately ISC The ISC- system indicates the stability of the crane. The additional stabilizers are controlled, if the outrigger is fully, semi or not extended, as well as if the s are fully extended. Depending on this information the ISC-system regulates the lifting force of the crane (integrated stability control) Additional Stabilizers AUSW A limiting switch monitors the fully retracted position of the outrigger. The completely retracted position is indicated by an optical and acoustical signal in the drivers cab (transport position monitoring) ABSTW A limiting switch monitors the fully retracted position of the outrigger and the s. The completely retracted position is indicated by an optical and acoustical signal in the drivers cab (transport position monitoring) 74
BEL LED- warning light on the s for better visibility of the position and more safety for the crane operator and pedestrians. The wiring is inside of the outrigger. The LED stripes are included in the delivery of the outrigger 12V/24V If you have selected one of the previous features you have to indicate the correct voltage rate M - JIC Option of screw joint, metric 24 olive tube fitting (M) and 37 flare type fitting (JIC) Cover Lateral covering of the outrigger box to protect the inner hoses and electrical wires from the ingress of dirt Colour The standard colour of the outrigger is black (KTL painting). Optional the outrigger can be delivered in other colours (RAL). Please note that a special colour will extend the delivery time Conservation Similar to the crane, the stabilizer system can be treated with a protective, washable layer EKAT Spare part catalogue The options AUSW, ISC as well as the information of the electric are obligatory to fulfil the new norm EN12999:2010 Versions of the s All the s, fitted with 10 tiltable stabilizer pads, are conform the EN12999:2010. The stabilizer pads adapt optimally to the respective incline of the subsoil. STZS: rigid STZY: 180 hydraulically tiltable STZY3: +/- 55 manually tiltable An extension of the is possible. After checking for restrictions, respectively approval of PALFINGER based on the current technical data sheets, the extensions are seperately orderable. HXE7886 extension by 100 mm HXE3507 extension by 200 mm Additional Stabilizers 75
Zusatzabstützungen Zusatzabstützungen Ausleger Abstützweite Max. Stützkraft Gewicht Abstützzylinder Merkmal A* B** Typ (mm) (kn) (kg) BS001-SA-A starr 2100**** 90 90 KSZ00233A STZS kurz 2200**** KSZ00234A STZS lang 2300**** KSZ00243A STZY3 BS002-SA-A hydraulisch 3400 90 180 KSZ00233A STZS kurz KSZ00234A STZS lang KSZ00243A STZY3 BS002-SA-M manuell 3400 90 155 KSZ00233A STZS kurz KSZ00234A STZS lang KSZ00243A STZY3 BS003-SA-A hydraulisch 4403 120 366 KSZ00159A STZS kurz KSZ00160A STZS lang KSZ00190A STZY3 KSZ00192A STZY KSZ00161A STZS kurz KSZ00162A STZS lang BS004-SA-A hydraulisch 5200 120 476 KSZ00159A STZS kurz KSZ00160A STZS lang KSZ00190A STZY3 KSZ00192A STZY BS005-SA-A hydraulisch 5200 140 427 KSZ00161A STZS kurz KSZ00162A STZS lang BS006-SA-A hydraulisch 5900 160 664 KSZ00167A STZS kurz KSZ00168A STZS lang KSZ00193A STZY3 KSZ00194A STZY BS007-SA-A hydraulisch 5900 160 605 KSZ00169A STZS kurz KSZ00170A STZS lang BS1003A hydraulisch 7501 180 1110 BS1284 STZS BS1285 STZS BS1321 STZS BS1242A-1 hydraulisch 8500 210 1680 BS1284 STZS BS1285 STZS BS1321 STZS BS085A*** hydraulisch, 6100 170 950 Inkl. höhen- STZS verstärkte verstellbaren Version BS086*** hydraulisch 6100 170 880 Inkl. schwenk- STZY baren BS1286*** hydraulisch 8600 200 1435 Inkl. automatisch STZY hochschwenkbaren BS1298*** hydraulisch 8600 200 1395 Inkl. starren STZS *) Montage oberhalb des Fahrzeugrahmens, **) Montage unterhalb des Fahrzeugrahmens, ***) Die CE Version ist nur über das Tuning Center erhältlich, ****) einmalige fixe Einstellung beim Aufbau des Querholms
Additional stabilizer range BS 000 X = for mounting above the frame Y = for mounting below the frame STZS = rigid STZY3 =+/- 55 manual tiltable STZY =180 hydraulically tiltable STT = extension for stabilizer ram available STZS3 = Height adjustability down up MEASUREMENTS TYPE F max. [kn] Outrigger Supportwidth B [mm] STZS3 X Y Supporting cylinder Supporting cylinder Weight(kg) STZY3 STT A C D E/E1 F/F1 G H I J Height ajustment Replace [metric] [JIC] Cyl. total STZS (manual) STZY (hydr.) [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] down up model X KSZ00233A KSZ00237A 95 185 short X E 716 F 1236 20 50 2100* X KSZ00234A KSZ00238A 110 200 long 2100* E 908 F 1616 20 50 BS001 90 rigid 2200* X KSZ00243A KSZ00244A 125 215 X X 2200* 230 107 E 854 F 1374 20 150 130 0 BS875 2300* X KSZ00235A KSZ00239A 87 177 short X 2300* E1 401 F1 851 380 50 X KSZ00236A KSZ00240A 95 185 long X E1 556 F1-1076 330 50 X KSZ00233A KSZ00237A 95 275 short X E 686 F 1206 20 50 X KSZ00234A KSZ00238A 110 290 long E 878 F 1586 20 50 BS002H 90 hydraulical 3400 X KSZ00243A KSZ00244A 125 305 X X 2300 230 107 E 824 F 1344 20 150 180 0 BS1296A X KSZ00235A KSZ00239A 87 267 short X E1 401 F1 851 380 50 X KSZ00236A KSZ00240A 95 275 long X E1 556 F1-1076 330 50 X KSZ00233A KSZ00237A 95 250 short X E 686 F 1206 20 50 X KSZ00234A KSZ00238A 110 265 long E 878 F 1586 20 50 BS002M 90 manual 3400 X KSZ00243A KSZ00244A 125 280 X X 2300 230 107 E 824 F 1344 20 150 180 0 BS876C X KSZ00235A KSZ00239A 87 242 short X E1 401 F1 851 380 50 X KSZ00236A KSZ00240A 95 250 long X E1 556 F1-1076 330 50 X KSZ00159A KSZ00174A 124 490 short X E 675 F 1255 25 50 X KSZ00160A KSZ00175A 144 510 long X E 874 F 1629 25 50 BS003 120 hydraulical 4403 X KSZ00190A KSZ00210A 148 514 X X E 825 F 1300-2323 230 127 X KSZ00192A KSZ00211A 172 538 X X E 881 F 1411-320 200 154 X KSZ00161A KSZ00178A 112 479 short X E1 406 F1 876 374 50 / 100 X KSZ00162A KSZ00180A 127 491 long X E1-576 F1 1156 374 50 / 100 X KSZ00159A KSZ00174A 124 600 short X E- 675 F- 1255 25 50 BS004 120 hydraulical 5200 X KSZ00160A KSZ00176A 144 620 long X E- 874 F- 1629 25 50 2323 230 127 320 200 154 X KSZ00190A KSZ00210A 148 624 X X E- 825 F- 1300 - X KSZ00192A KSZ00211A 172 648 X X E- 881 F- 1411 - BS005 140 hydraulical 5200 X KSZ00161A KSZ00178A 112 540 short X E1-400 F1-870 374 50 / 100 2323 230 127 250 335 119 X KSZ00162A KSZ00180A 127 555 long X E1-570 F1-1150 374 50 / 100 X KSZ00167A KSZ00182A 126 790 short X E- 650 F- 1230 55 50 BS006 160 hydraulical 5900 X KSZ00168A KSZ00184A 148 812 long E- 849 F- 1604 55 50 2323 230 127 400 250 234 X KSZ00193A KSZ00212A 148 812 X X E- 800 F- 1275 - BS446A X KSZ00194A KSZ00213A 172 836 X X E- 856 F- 1386 - BS007 160 hydraulical 5900 X KSZ00169A KSZ00186A 115 720 short X E1-400 F1-870 380 50 / 100 2323 230 127 322 354 237 X KSZ00170A KSZ00188A 130 735 long X E1-570 F1-1150 330 50 / 100 BS423A X BS1284 no JIC 160 1270 standard E - 677 F - 1287 0 BS1003A 180 hydraulical 7105 X BS1285 no JIC 180 1290 long 2106 300 146 E1-412 F1-936 500 619 337 289 x X BS1321 no JIC 160 1270 short E1-373 F1-752 396 X BS1284 no JIC 160 1840 standard E - 669 F - 1279 0 BS1242A-1 210 hydraulical 8500 X BS1285 no JIC 180 1860 long 2181 300 146 E1-452 F1-976 459 703 440 340 x X BS1321 no JIC 160 1840 short E1-414 F1-793 355 * depending on the first setting in the workshop These data correspond to the state and is not subject to maintenance. Issued 02.08.2011 Dimensions may vary. Subject to technical changes, errors and translation mistakes
Options for the additional stabilizer range Extensions for the additional Stabilizer range BS 000 CODE *AUSW / AUSVW DESCRIPTION A limiting switch monitors the fully retracted position of the outrigger. The completely retracted position is indicated by an optical and acoustical signal in the drivers cab. (transport position monitoring) BS001 BS002H BS002M BS003 BS004 BS005 BS006 BS007 BS1003A BS1242A-1 STT = extension for supporting cylinder available *HPSC HPSC detects the exact position and state of each stabilizer and calculates the maximum stability for every individual stabilizer situation. *PAL50 / PAL150 If you have selected HPSC you have to indicate the type of PALTRONIC on the crane. ATTENTION: the two system are not interchangeable TYPE Extension For BS ABSTW Monitors the fully retracted position of the outrigger and the. The completely retracted position is indicated by an optical and acoustical signal in the drivers cab. (transport position monitoring) HXE9162 100 [mm] BS001 / BS002H / BS002M BEL LED- warning light on the s for better visibility of the position and more safety for the crane operator and pedestrians HXE3220 200 [mm] BS001 / BS002H / BS002M *12V / 24V If one of the previous features is selected, the voltage has to be indicated. HXE7886 100 [mm] BS003 / BS004 / BS005 / BS006 / BS007 *ADECK This is an additional covering of the outrigger box mounted on both sides to protect the hoses and the electrical wires in the outrigger. (Included on HPSC at BS1003A and BS1242A-1) HXE3507 200 [mm] BS003 / BS004 / BS005 / BS006 / BS007 JIC In standard the fittings are metric 24 olive tube fittings, optional the possibility of 37 flare type fitting (JIC) RAL Standard colour of the outrigger is black (KTL painted) optional we can deliver the outrigger in a requested colour (RAL).Please note that a colour will extend the delivery time about 10 working days. KRANK Similar to the crane we can deliver the stabilizer system with a washable protection coat. EKAT These additional stabilizer system are available with a printed spare part catalogue. * EN12999:2011 OBLIGATORY = option = not available These data correspond to the state and is not subject to maintenance. Issued 02.08.2011 Dimensions may vary. Subject to technical changes, errors and translation mistakes