Distribution terminal block; 3 x CAGE CLAMP connection 10 mm²; 1 x screw-clamp connection 35 mm²

Similar documents
Printview: 2-conductor ground terminal block - Item No.:

Printview: Multilevel installation terminal block; N/L - Item No.:

Printview: 3-conductor ground terminal block; suitable for Ex e II applications - Item No.: /

2-channel analog input module; Pt100 / RTD; for resistance sensors

Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in

Printview: Screwless end stop; 6 mm wide - Item No.:

Printview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.

OUR POWER TEAM. High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)

Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series

X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks

Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:

UK 6-FSI/C. Extract from the online catalog. Order No.:

PT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.:

STS 2,5. Extract from the online catalog. Order No.:

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:

PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.:

PIT 2,5-TG. Extract from the online catalog. Order No.:

Insulated multipole operating tools for front-entry terminal blocks. 1-pole pole pole

8WH2 Spring-Loaded Terminals

8WH2 Spring-Loaded Terminals

Datasheet. W-series terminal with clamping yoke connection WSI 6

MS General Information Extended Product Type: MS

Product Information. Viewline Temperature gauges. Description. Gauge to indicate Coolant-, Engine oil-, Air- and Exhaust temperature.

MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories

Han ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B

ST 4-HESI (5X20) Extract from the online catalog. Order No.: Fuse terminal block for assembly on NS 35, for 5 x 20 cartridge fuse inserts

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals

UKK 5-PV. Extract from the online catalog. Order No.:

Data sheet... W-Series WPE 4

- 1 - General ordering data Order No

Data sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX

TECHNICAL GUIDELINE. Medium Voltage Conductor Ampacities ALUMINUM COPPER. Single Conductor 5kV - 35kV

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity

IEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448


Data sheet... W terminal earth terminal WPE 4

Viking 3 - Screw connection Disconnect terminal blocks

Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX

SAC-4P-M12MS/ 5,0-PUR SH

Series 858, Relay Sockets with Industrial Relay

Thermostat for shipbuilding Switching differential Not adjustable

System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications

Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX

onlinecomponents.com

Terminal blocks with clamping yoke and screw connection system

Oil Mist Detection multi-sensor-system for 2-stroke engines

Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35

selos Wieland jumpering system Perfect technology Copper Steel Wieland marking system Reliable identification Perfect technology Extremely rugged!

NEW. Datasheet. WMF 2.5 Terminal Series

Datasheet. W-series terminal with clamping yoke connection WDU 4

CT - CTS inserts with incorporated terminal block for multipole connectors (10A max versions)

B Mini Contactor V Hz

Data sheet TERMSERIES TRZ 120VUC 1CO

SMD TERMINAL BLOCKS. Small is Big!

Data sheet. W-Series WDU 4 SL/EN

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..

BETA Switching Switches and Light Indicators

Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT

BC Mini Contactor VDC

5 mm contact pin pitch PCB or 95 series sockets

SCREW CONNECTION TERMINAL BLOCKS

CTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY

8WH6 ipo Installation Terminals

Rated voltage (V) Current (A) Stranded wire. Solid wire A.D.O. (AWG)

Operating Tools Test and Measurement Tools

DRY TYPE TRANSFORMERS

SAC-5P-3,0-PUR/M12FS SH

Class R 250V and 600V modular ferrule and knifeblade fuse blocks

RX 3 MCB 4500 A Phase + Neutral, neutral on left side

General Informations 2 Technical data 3 Basic designs 4-8

55 Series - Miniature General Purpose Relays 5-10 A

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases

Motors Automation Energy Transmission & Distribution Coatings. Automation Contactors - CWM Line

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks

X-BT-ER stainless steel threaded studs for electrical connections

N4 Series Magnetic Encoder Module High Resolution Module

Powermate Range pitch 7.00 Powermate Range pitch 7.00

General_technical_data Series

IEC Low Voltage General Purpose Protection

8WH6 ipo Plug-In Terminals

Position Switches Series 8070/2

PowerLogic High Density Metering System 4-Meter Enclosure Installation Guide

Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks

Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases

MBS AG. CTB Plug-in current transformer MBS AG. Dimensions: General technical specifications:

CO (DPDT) 16/25 250/ /440 2,000 4, /0.5/ /0.5/ (5/5) 300 (5/5) AgNi

Corrosion Protection for Electrical Conduit and Fittings

Multi-pole terminal strips

Terminal blocks. J - Accessories. Summary. 1. Mounting rails End stops Circuit separators, seperator end sections...

PCB plug-in connectors

Terminal blocks with Push In connection technology. Product Information

Technical Data. Miniature circuit-breakers for branch circuit protection according to UL 489, CSA C 22.2 No. 5

DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD

AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals

Class J modular ferrule and knifeblade fuse blocks

LK Position Switches TECHNICAL DATASHEET.

...at Altech, of course!

Transcription:

3 mm² - Item No: 284-62 Distribution terminal block; 3 x CAGE CLAMP connection 0 mm²; x screw-clamp connection 3 mm² Item No: 284-62 Distribution terminal block; 3 x CAGE CLAMP connection 0 mm²; x screw-clamp connection 3 mm² Marking Business data Supplier WAGO Item no 284-62 EAN 404442826 Content Order amount Customer item number Notes Technical data Miscellaneous Total number of connection points 4 Total number of potentials Color gray Pollution degree () 3 Rated voltage EN () [V] 800 [V] Rated surge voltage () [kv] 8 [kv] Nominal current [A] 2 [A] Connection technology () CAGE CLAMP Connection type Screw clamp connection

3 mm² - Item No: 284-62 Technical data Cross section from () [mm²] Cross section up to () [mm²] Cross section from () [AWG] Cross section up to () [AWG] Cross section from (2) [mm²] Cross section up to (2) [mm²] Cross section from (2) [AWG] Cross section up to (2) [AWG] Stripped length from () [mm] Stripped length up to () [mm] Stripped length () [in] Type of wiring Design Marking level Fire load [MJ] Weight [g] Width [mm] Width [in] Height [mm] Height [in] Length [mm] Length [in] Type of mounting Safety information 02 [mm²] 0 [mm²] 24 [AWG] 8 [AWG] 6 [mm²] 3 [mm²] 0 [AWG] 2 [AWG] 2 [mm] 4 [mm] 0 [in] Front-/Side-entry wiring horizontal Side marking 07 [MJ] [g] 7 [mm] 0689 [in] 39 [mm] [in] 89 [mm] 304 [in] DIN 3 rail Screw torque: 3Nm Approbation Item No Registration Registration no Voltage [V] Current [A] Cross section [mm², AWG] 284-62 ABS 0-HG4767/3- PDA 00 2 3 284-62 BV 07436/C0 0,2-0 284-62 CBcertificateChina NL0208 800 2 3 284-62 CCA NL90 800 3 2

3 mm² - Item No: 284-62 Approbation 284-62 CCA NTR NL-7078 800 284-62 CSA 42-36073 600 0 0-2/3x24-8 284-62 DNV E-0423 00 2 3 284-62 GL 729-00HH 00 2 3 284-62 KEMA 208289 800 2 3 284-62 LR 9/202(E6) 00 2 3 284-62 PRS TE/78/88090/0 800 3 8 284-62 RMR 30002 00 2 3 284-62 UL E472 600 24-8 Jumper Item no Description Pack unit (Sub Pack) 284-42 Comb-style jumper bar; insulated; nominal current 2 A; 2-way 2 3

3 mm² - Item No: 284-62 Carrier rail Item no Description Pack unit (Sub Pack) 20-2 Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; slotted; according to en 607; "Hole width 2 mm 20-3 Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; unslotted; according to en 607 20-4 Steel carrier rail; 3 x mm; mm thick; 2 m long; unslotted; according to en 607 20- Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; slotted; according to en 607; "Hole width 8 mm 20-8 Steel carrier rail; 3 x mm; 23 mm thick; 2 m long; unslotted; according to en 607 20-96 Aluminum carrier rail; 3 x 82 mm; 6 mm thick; 2 m long; unslotted; according to en 607 20-97 Steel carrier rail; 3 x mm; mm thick; 2 m long; slotted; according to en 607 20-98 Copper carrier rail; 3 x mm; 23 mm thick; 2 m long; unslotted; according to en 607 20-04 Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; slotted; galvanized; according to EN 607 20-0 Steel carrier rail; 3 x 7 mm; mm thick; 2 m long; unslotted; galvanized; according to EN 607 20-06 Steel carrier rail; 3 x mm; mm thick; 2 m long; unslotted; galvanized; ähnlich EN 607 20-08 Steel carrier rail; 3 x mm; mm thick; 2 m long; slotted; galvanized; ähnlich EN 607 4

3 mm² - Item No: 284-62 Marking accessories Item no Description Pack unit (Sub Pack) 209-0 WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with 0 209-0/000-002 WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with 0 209-0/000-00 WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with 0 209-0/000-006 WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with 0 209-0/000-007 WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with 0 209-0/000-02 WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with 0 209-0/000-07 WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with 0 209-0/000-023 WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with 0 209-0/000-024 WSB quick marking system; plain; for terminal block width - 7 mm; 0 strips with 0 793-0 WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0 793-0/000-002 WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0 793-0/000-00 WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0 793-0/000-006 WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0 793-0/000-007 WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0 793-0/000-02 WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0 793-0/000-07 WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0 793-0/000-023 WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0

3 mm² - Item No: 284-62 793-0/000-024 WMB Multi marking system; plain; for terminal block width - 7 mm; 0 strips with 0 793-0 WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 793-0/000-002 WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 793-0/000-00 WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 793-0/000-006 WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 793-0/000-007 WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 793-0/000-02 WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 793-0/000-07 WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 793-0/000-023 WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 793-0/000-024 WMB Multi marking system; plain; for terminal block width - 7 mm; stretchable - 2 mm; 0 strips with 0 Protective warning marker Item no Description Pack unit (Sub Pack) 284-4 Protective warning marker; with high-voltage symbol, black; for terminal blocks 2 6

3 mm² - Item No: 284-62 General accessory Item no Description Pack unit (Sub Pack) 209-06 Mounting carrier; for isolated mounting on DIN 3 rails 2 209-96 Spare fixing/retaining screw; for cover 2 20-86 Stickers for operating instructions; for front-entry rail-mounted terminal blocks; 279 to 28 00 Series 20-49 Spare knurled nut; for cover 2 20-72 Operating tool with partially insulated shaft; Type 3, blade ( x 08) mm; suitable for 282, 283, 284, 28, 782, 783, 784, 78, 2006, 200 and 206 Series 249-0 Pivoting group marker carrier 2 284-400 Finger guard; touchproof cover protects unused conductor entries 2 709-4 Cover; type 2; suitable for cover carrier, type 2; m long 7

3 mm² - Item No: 284-62 Images & drawings 8

3 mm² - Item No: 284-62 Address Hansastr 27 32423 Minden Telefon: 07/887-0 Fax: 07/887-69 http://wwwwagocom Technische Änderungen und Irrtümer vorbehalten 9