Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199 BSPP Page 5-12 08 BSPT Page 5-13 Tube-to-Tube Fittings 03 BSPT Page 5-13 01 BSPP Page 5-14 01..39 BSPP Page 5-14 0119 BSPP Page 5-0119..39 BSPP Page 5- Compression Fittings 0 Page 5-0113 Page 5-1 011 Page 5-1 02 Page 5-1 04 Page 5-17 0142 Page 5-17 07 Page 5-17 Complementary Fittings 01 Page 5-20 0124 Page 5-21 0124..40 Page 5-21 0111 Page 5-21 01 Page 5-22 01..40 Page 5-22 01..0 Page 5-22 01..70 Page 5-22 Compression Fittings Self-Fastening Hose Barb Connectors 0132 Page 5-25 0133..39 Page 5-25 0134 Page 5-25 Accessories 0122 Page 5-2 0 Page 5-2 012 Page 5-27 0125 Page 5-27 0220 Page 5-27 0220..39 Page 5-27 0120 Page 5-28 0112 Page 5-28 0128..39 Page 5-29 01..39 Page 5-29 0..39 Page 5-29 0127 Page 5-30 5-5
Compression Fittings These "universal" fittings provide users with numerous connection options for a wide variety of tube materials without the need for tube threading or soldering. This range guarantees excellent long-term sealing and performance. Product Advantages Simple to Install and Use Suitable for pneumatic and medium pressure hydraulic applications Compatible with many industrial fluids arge product range: 22 configurations Excellent sealing due to the tightening of the olive onto the tube Metallic sealing guarantees maximum service life High strength brass for increased mechanical reliability Wide Variety of Tubing Connection of different types of tubing and hose: metal, polymer, steel, rubber, etc. Multiple tube diameters can be connected using the Parker egris reducer assembly system No insert required for rigid and semi-rigid polyamide tubing below 14 mm Pneumatics Cooling Automotive Process ubrication Fluid Transmission Packaging Industrial Machinery Applications Technical Characteristics Compatible Fluids Water, machining oil, fuel, hydraulic oil, compressed air, chemical fluids, disinfectants Component Materials Tube: polymer Working Pressure Vacuum to 550 bar Tube: steel Olive: 0124-40 (steel) Nut: 01-70 (polymer) Working Temperature -0 C to +250 C without sealing washer, with metal tubing Nut: 01-40 (steel) Olive: 0124 (brass) Reducer: 01 (brass) Tightening Torque See "Technical Characteristics" on opposite page Barb connector Working temperature: -20 C to +0 C, with sealing washer and polyamide tubing. Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm Hg (99% vacuum). Thread sealing must be guaranteed by user. Nut: 01 (brass) Fitting body: brass Tube: polymer Maximum Bore Diameters The table below shows the recommended compatibility of tube size, BSPP male thread and maximum bore. Tube O.D. BSPP Thread Max. Bore 4-5- G1/8 4-8- G1/4 7-12-14 G3/8 11 14--1- G1/2 14-20-22 G3/4 22-25-28 G1 24 Tube ength for Assembly Minimum length of tube () between 2 fi ttings. ød (mm) mini (mm) (mm) 4 2.5 12 39 20 51 5 2 14 41 22 54 2 41 25 2 8 32 1 4.5 28 2 39 49.5 Regulations CNOMO: E07.21.1N (for robotic equipment in the automotive industry) DI: 97/23/EC (PED) RG: 1907/200 (REACH) DI: 2002/95/EC (RoHS) DI: 94/9/EC (ATEX) 5-
Technical Characteristics Installing Compression Fittings Cutting the Tube Preparing the Connection Connecting the Tube Final Assembly Cut the polymer or metal tube square. For metal tubing, de-burr the tube prior to connection. Tube bending should be done before connection. Push the tube up against the shoulder of the body of the fitting and hand tighten. Tighten the nut using a spanner or torque wrench to enable the olive to bite on the tube, the connection being completed when the recommended tightening torque is reached (see tables below). Compression Fittings Slide the nut onto the tube; lubricate the threads on the body and nut along with the olive to facilitate tightening (for metal tubing as well). Fit the olive onto the end of the tube. It is recommended to use an insert in order to prevent tube creeping (diameter > 14mm) Recommended Nut Tightening Torque Tightening torque in dan.m = maximum tightening torque of a 01 nut and 0124 olive with copper, brass or steel tube. C C Nut 01 and 01..40 Nut 01..0 F F Ø D (mm) F 01 F 01..0 Max. dan.m Copper or F 01..40 4 11 0.7 1.5 5 12 13 0.7 12 1.5 13 13 1.5 13 2.5 8 14 1 1.5 14 2.5 19 20 1.8 19 3 12 22 22 3 22 4.5 14 24 24 3.5 24 5.5 24 24 4 24 1 27 27 5 27 7 30 30 30 9 20 32 32 32 22 3 3 7 3 12 25 41 41 8 41 13 28 42 9 Max. dan.m Steel Compression Fittings Customised Fittings Working directly with its customers and based on its knowledge and experience, Parker egris can design customised brass compression fittings for specific requirements using the customer's specifications. The range of compression fittings also offers nickel chemical surface treatment in order to improve the corrosion resistance and chemical compatibility of the fittings (the model number of the fitting is then given the suffix 99). The above recommendations are given in good faith. However, since each application is different, it is advisable to undertake tests in actual working conditions. 5-7
Technical Characteristics The use of Parker egris brass compression fittings is dependant on the tube material. Tables of recommended working pressure for the different tubes are shown below. Recommended Tube Type Copper tube: copper which has been "cold rolled", cold drawn and in straight lengths. tube: in cold-rolled straight lengths (same working pressure as for copper tube). "Coiled annealed" copper tube: reduces working pressure by 35%; must be avoided completely if vibration is present. Steel tube: "thin wall" cold drawn, seamless, bright annealed and in straight lengths. mm to 1 mm O.D.: max. wall thickness 1 mm Above 1 mm O.D.: max. wall thickness 1.5 mm Polyamide tube: semi-rigid For rigid polyamide tube, multiply the figures in this table by 1.8. Recommended Tube-Fitting Assembly Configurations Assembled using Parker egris brass olive and nut. Assembled using Parker egris steel olive and nut (nut type 01..40). Assembled using Parker egris brass olive and nut. Copper Tube Maximum Working Pressure (bar) Steel Tube Maximum Working Pressure (bar) Parker egris Semi-Rigid Polyamide Tube Maximum Working Pressure (bar) 0 240 0 00 0 45 2 x 4 3 x 5 4 x x 8 8 x x 12 12 x 14 13 x 14 x 1 1 x. x x 20 17. x 20 20 x 22.8 x 22 23 x 25 21.8 x 25 2 x 28 24.8 x 28 24 x 28 55 45 42 40 37 55 35 50 30 0 20 55 25 40 50 0 75 0 190 230 2 x 4 3 x 5 4 x x 8 8 x x 12 12 x 14 13 x 14 x 1 1 x x 20 20 x 22 23 x 25 400 290 3 225 590 240 225 480 200 145 400 125 340 0 1 3 140 1 280 120 85 230 0 70 190 90 0 70 40 1 550 40 970 470 370 80 770 Maximum Working Pressure (bar) Working Pressure with Water Hammer (bar) Maximum Water Hammer Pressure (bar) 3 x 4 2.7 x 4 2 x 4 3.3 x 5 4 x x 8 8 x 7.5 x x 12 9 x 12 12 x 14 11 x 14.4 x 14 12 x 11 x 13 x 1 12 x 1 14 x x 20 1 x 22 19 x 25 23 x 28 22 x 28 20 25 22 1 23 12 22 1 22 14 23 12 21 17 20 21 1 20 30 32 40 When using a plastic nut type 01..70, the maximum working pressure is bar, for all diameters. Working Pressure Coefficients for Semi-Rigid Polyamide Tubing Temperature C -40 C / - C - C / +30 C +30 C / +50 C +50 C /+70 C +70 C /+0 C Factor 1.8 1 0.8 0.55 0.31 Parker egris brass compression fittings are not compatible with ammonia and its derivatives. The above recommendations are given in good faith. However, since each application is different, it is advisable to undertake tests in actual working conditions. 5-8
Compression Fittings 05 Stud Fitting, Male BSPT Thread C F F1 H max H1 Kg 4 R1/8 05 04 17 7 0.012 5 R1/8 05 05 11 12 17.5 7.5 0.01 R1/4 05 05 13 14 12 17.5 7.5 0.023 R1/8 05 0 11 13 7.5 0.017 R1/4 05 0 13 14 13 7.5 0.024 R3/8 05 0 17 17 13 8.5 0.030 R1/8 05 08 13 14 19.5 7 0.020 8 R1/4 05 08 13 14 14 19.5 7 0.025 R3/8 05 08 17 17 14 20.5 8 0.032 R1/8 05 17 19 24 9 0.042 R1/4 05 13 17 19 24 9 0.047 R3/8 05 17 17 19 24 9 0.048 R1/2 05 21 22 19 25 0.0 R1/4 05 12 13 19 22 24 9 0.059 12 R3/8 05 12 17 19 22 24 9 0.00 R1/2 05 12 21 22 22 25 0.07 R1/4 05 14 13 22 24 25 8 0.07 14 R3/8 05 14 17 22 24 25 8 0.08 R1/2 05 14 21 22 24 2 9 0.080 R3/4 05 14 27 27 24 27 0.7 R3/8 05 17 22 24 25 8 0.0 R1/2 05 21 22 24 2 9 0.077 R1/4 05 1 13 24 27 27 9.5 0.090 1 R3/8 05 1 17 24 27 27 9.5 0.092 R1/2 05 1 21 24 27 27 9.5 0.099 R3/4 05 1 27 27 27 28.5 0.119 R1/2 05 21 27 30 30.5 0.125 R3/4 05 27 27 30 30.5 0.137 20 R1/2 05 20 21 30 32 32 11 0.14 R3/4 05 20 27 30 32 32 11 0.7 R1/2 05 22 21 32 3 33 11 0.8 22 R3/4 05 22 27 32 3 33 11 0.197 R1 05 22 34 3 3 33 11 0.225 25 R3/4 05 25 27 3 41 3 11 0.23 R1 05 25 34 3 41 3 11 0.277 28 R3/4 05 28 27 41 42 3 11 0.273 R1 05 28 34 41 42 3 11 0.284 Compression Fittings Compression Fittings Metric taper threads or NPT threads are available by special order, subject to minimum quantities. 05 Stud Fitting, Male NPT Thread C F F1 H max H1 Kg NPT1/8 05 0 11 11 13 7.5 0.0 NPT1/4 05 0 14 14 13 7.5 0.027 8 NPT1/8 05 08 11 13 14 21 7 0.021 NPT1/4 05 08 14 14 14.5 7 0.02 NPT1/4 05 14 17 19 24 9 0.047 NPT3/8 05 17 19 24 9 0.047 NPT1/2 05 22 22 19 25 0.0 Related Products Parker also offers another type of brass compression fi tting: Metrulok, with a one-piece olive/nut. Do not hesitate to contact us. 5-9
Compression Fittings 01, technical polymer Stud Fitting with Captive Sealing Washer, Male BSPP and Metric Thread C E F F1 H max H1 Kg 4 M5x0.8 01 04 19 5 1.5 8 0.011 G1/8 01 04.5 13 1.5 8 0.01 5 G1/8 01 05.5 13 12 17.5 8.5 0.0 G1/8 01 0.5 13 13 8.5 0.020 G1/4 01 0 13 8 17 13 9.5 0.030 G1/8 01 08.5 13 14 19 8.5 0.021 8 G1/4 01 08 13 8 17 14 19.5 9 0.031 G3/8 01 08 17 11 22 14 20.5 0.044 G1/4 01 13 8 17 19 24 11 0.048 G3/8 01 17 11 22 19 24 11.5 0.01 G1/4 01 12 13 8 19 22 24 11 0.02 12 G3/8 01 12 17 11 22 22 24 11.5 0.070 G1/2 01 12 21 12 27 22 24 12 0.089 14 G3/8 01 14 17 11 22 24 25.5 0.074 G1/2 01 14 21 12 27 24 25 11 0.093 G3/8 01 17 11 22 24 25.5 0.071 G1/2 01 21 12 27 24 25 11 0.094 1 G3/8 01 1 17 11 22 27 27 12 0.091 G1/2 01 1 21 12 27 27 27 12.5 0.9 G1/2 01 21 12 27 30 29.5 12.5 0.128 G3/4 01 27 13 32 30 29.5 13 0.2 20 G3/4 01 20 27 13 32 32 31 13 0.14 22 G3/4 01 22 27 13 32 3 32 13 0.194 G1 01 22 34 41 3 31 13.5 0.259 25 G3/4 01 25 27 13 3 41 35.5 13 0.20 G1 01 25 34 41 41 35.5 13 0.30 28 G1 01 28 34 41 42 35.5 13.5 0.299 With pre-assembled polyamide washer Sealing washers 002 can be found in chapter 9. 01..39, zinc-plated steel with NBR seal Stud Fitting, with Bi-Material Seal, Male BSPP Thread C E F F1 H max H1 Kg 4 G1/8 01 04 39 5.5 13 17.5 9 0.01 5 G1/8 01 05 39 5.5 13 12.5 9.5 0.019 G1/8 01 0 39 5.5 13 13 19 9.5 0.020 G1/4 01 0 13 39 7 17 13 19.5 0.030 G1/8 01 08 39 5.5 13 14 20 9.5 0.022 8 G1/4 01 08 13 39 7 17 14 20.5 0.031 G3/8 01 08 17 39 9.5 22 14 21.5 12 0.045 G1/4 01 13 39 7 17 19 25 12 0.048 G3/8 01 17 39 9.5 22 19 25.5 13 0.01 G1/4 01 12 13 39 7 19 22 25 12 0.02 12 G3/8 01 12 17 39 9.5 22 22 25 13 0.070 G1/2 01 12 21 39.5 27 22 25 13.5 0.090 14 G3/8 01 14 17 39 9.5 22 24 2.5 12 0.07 G1/2 01 14 21 39.5 27 24 2.5 12.5 0.094 G3/8 01 17 39 9.5 22 24 2.5 12 0.071 G1/2 01 21 39.5 27 24 2.5 12.5 0.094 1 G3/8 01 1 17 39 9.5 22 27 28.5 13.5 0.092 G1/2 01 1 21 39.5 27 27 28.5 14 0.9 G1/2 01 21 39.5 27 30 31 14 0.129 G3/4 01 27 39 11.5 32 30 31 14.5 0.4 20 G3/4 01 20 27 39 11.5 32 32 32.5 14.5 0.17 22 G3/4 01 22 27 39 11.5 32 3 32.5 14.5 0.197 G1 01 22 34 39 13 41 3 33.5 0.259 25 G1 01 25 34 39 13 41 41 37.5.5 0.309 28 G1 01 28 34 39 13 41 42 37.5.5 0.300 Thread with bi-material seal Bi-material sealing washers, part number 0139, can be found in Chapter 9 5-
Compression Fittings 01 Stud Fitting, Male Metric Thread C E F F1 H max H1 Kg 4 M7x1 01 04 55.5 1.5 7.5 0.012 M8x1 01 04 5.5 11 1.5 7.5 0.013 5 M8x1 01 05 5.5 11 12 17.5 8 0.0 Mx1 01 05 0.5 14 12 17.5 8.5 0.020 Mx1 01 0 0.5 14 13 8.5 0.021 Mx1.5 01 0 2.5 14 13 8.5 0.021 M12x1 01 08 5 8 17 14 19.5 9 0.029 8 M12x1.25 01 08 8 17 14 19.5 9 0.029 M13x1.25 01 08 8 8 17 14 19.5 9 0.030 M14x1.25 01 70 8 17 19 24 11 0.048 M14x1.5 01 71 8 17 19 24 11 0.047 M1x1.25 01 74 9 19 19 24 11 0.051 M1x1.5 01 75 9 19 19 24 11 0.051 Mx1.5 01 78 9 22 19 24 11.5 0.00 M1x1.25 01 12 74 9 19 22 24 11 0.01 12 M1x1.5 01 12 75 9 19 22 24 11 0.01 Mx1.5 01 12 78 9 22 22 24 11.5 0.071 14 Mx1.5 01 14 78 9 22 24 25.5 0.073 M20x1.5 01 14 80 24 24 25 11 0.084 Mx1.5 01 78 9 22 24 25.5 0.071 1 M20x1.5 01 1 80 24 27 27 12.5 0.1 M22x1.5 01 1 82 27 27 27 12.5 0.1 M22x1.5 01 82 27 30 29.5 12.5 0.129 M24x1.5 01 83 11 30 30 29.5 13 0.142 Compression Fittings 0114 Stud Fitting, Female BSPP Thread C E F F1 H max H1 Kg 4 G1/8 0114 04 9.5 14 2 1.5 0.020 G1/4 0114 04 13 13.5 17 30 20.5 0.030 5 G1/8 0114 05 9.5 14 12 28 17 0.023 G1/4 0114 05 13 13.5 17 12 31 21 0.033 G1/8 0114 0 9.5 14 13 28 17 0.025 G1/4 0114 0 13 13.5 17 13 32 21 0.034 G3/8 0114 0 17 14 22 13 32 21.5 0.051 G1/8 0114 08 9.5 14 14 29 1.5 0.02 8 G1/4 0114 08 13 13.5 17 14 33 20.5 0.035 G3/8 0114 08 17 14 22 14 34 21 0.052 G1/4 0114 13 13.5 17 19 37 21.5 0.052 G3/8 0114 17 14 22 19 37 22 0.08 G1/2 0114 21.5 27 19 42 2.5 0.0 G1/4 0114 12 13 13.5 19 22 3 20.5 0.08 12 G3/8 0114 12 17 14 22 22 37 22 0.078 G1/2 0114 12 21.5 27 22 42 2.5 0.9 G1/4 0114 14 13 13.5 22 24 3.5 0.085 14 G3/8 0114 14 17 14 22 24 38 21 0.048 G1/2 0114 14 21.5 27 24 43 25.5 0.112 G3/8 0114 17 14 22 24 38 21 0.078 G1/2 0114 21.5 27 24 43 25.5 0.9 G1/4 0114 1 13 13.5 24 27 3 0.7 1 G3/8 0114 1 17 14 24 27 38 20.5 0. G1/2 0114 1 21.5 27 27 44 2 0.128 G3/8 0114 17 14 27 30 39 19.5 0.140 G1/2 0114 21.5 27 30 45 2 0.144 G3/4 0114 27 19.5 32 30 4 27 0.14 G3/8 0114 20 17 14 30 32 38 0.11 20 G1/2 0114 20 21.5 30 32 44.5 24 0.171 G3/4 0114 20 27 19.5 32 32 47 2.5 0.171 22 G3/4 0114 22 27 19.5 32 3 48 2.5 0.203 25 G3/4 0114 25 27 19.5 3 41 50.5 2 0.297 Compression Fittings 5-11
Compression Fittings 09 Stud Elbow, Male BSPT Thread C F H J max 1 Kg 4 R1/8 09 04 17 8 19 9.5 0.01 R1/4 09 04 13 20 19 11 0.024 5 R1/8 09 05 12 17.5 8 21 11 0.019 R1/4 09 05 13 12 21.5 22 12 0.029 R1/8 09 0 13 8 22 11 0.021 R1/4 09 0 13 13 21.5 22 12 0.030 R1/8 09 08 14.5 28 0.028 8 R1/4 09 08 13 14 22 28 0.034 R3/8 09 08 17 14 24 12 28 0.043 R1/4 09 13 19 25 12 30 14.5 0.053 R3/8 09 17 19 25.5 12 30 14.5 0.059 R1/2 09 21 19 32 19 3 21 0.8 R1/4 09 12 13 22 2 30 0.074 12 R3/8 09 12 17 22 27 30 0.077 R1/2 09 12 21 22 32 19 3 21 0.114 14 R3/8 09 14 17 24 30 19 35 0.5 R1/2 09 14 21 24 32 19 35 0.111 R3/8 09 17 24 30 19 35 0.0 R1/2 09 21 24 32 19 35 0.8 R3/8 09 1 17 27 30 19 39 21 0.121 1 R1/2 09 1 21 27 33.5 19 39 21 0.129 R3/4 09 1 27 27 3.5 23 41 23 0.5 R1/2 09 21 30 35.5 23 41 21.5 0.179 R3/4 09 27 30 3.5 23 41 21.5 0.198 20 R1/2 09 20 21 32 3.5 23 42 21.5 0.3 R3/4 09 20 27 32 38 23 42 21.5 0.203 22 R3/4 09 22 27 3 40 27 50 30 0.287 R1 09 22 34 3 44 27 50 30 0.33 25 R3/4 09 25 27 41 43 27 54 30 0.328 R1 09 25 34 41 44 27 54 30 0.38 28 R3/4 09 28 27 42 4 32 54 30 0.404 R1 09 28 34 42 48 32 54 30 0.382 Metric taper threads or NPT threads are available by special order, subject to minimum quantities. 09 Stud Elbow, Male NPT Thread C F H J max 1 Kg NPT1/8 09 0 11 13 8 22 11 0.021 NPT1/4 09 0 14 13 21.5 22 12 0.030 8 NPT1/8 09 08 11 14.5 28 0.028 NPT1/4 09 08 14 14 22 28 0.033 NPT1/4 09 14 19 25 12 30 14.5 0.053 0199, NBR Stud Orientable Elbow, Male BSPP Thread C F F1 H H1 H1 max J max 1 Kg 4 G1/8 0199 04 14 23 1 17 8 19 9.5 0.022 G1/4 0199 04 13 19 30.5 22 23.5 19 11 0.043 G1/8 0199 0 14 13 23 1 17 8 22 11 0.027 G1/4 0199 0 13 19 13 30.5 22 23.5 22 12 0.04 G1/8 0199 08 14 14 24 17 28 0.034 8 G1/4 0199 08 13 19 14 30.5 22 23.5 28 0.049 G3/8 0199 08 17 22 14 33.5 24 25.5 12 28 0.05 G1/4 0199 13 19 19 31 22.5 24 12 30 14.5 0.07 G3/8 0199 17 22 19 33.5 24 25.5 12 30 14.5 0.078 G1/2 0199 21 27 19 40 29.5 31 19 37 22 0.137 14 G3/8 0199 14 17 22 24 35.5 2 27.5 19 35 0.1 G1/2 0199 14 21 27 24 40 29.5 31 19 35 0.140 G1/2 0199 21 27 30 40 29 30.5 23 41 21.5 0.7 G3/4 0199 27 32 30 43.5 32 33.5 23 41 21.5 0.222 22 G3/4 0199 22 27 32 3 45.5 34 3 32 51 31 0.385 G1 0199 22 34 41 3 54 40.5 43 32 51 31 0.409 28 G1 0199 28 34 41 42 54 40.5 43 32 54 30 0.411 The body will orientate for positioning purposes. 5-12
Compression Fittings 08 Stud Branch Tee, Male BSPT Thread C F H J 1 /2 Kg 4 R1/8 08 04 17 8 9.5 19 0.025 5 R1/8 08 05 12 17.5 8 11 21 0.031 R1/8 08 0 13 8 11 22 0.033 R1/4 08 0 13 13 21.5 1 27 0.047 R1/8 08 08 14.5 28 0.043 8 R1/4 08 08 13 14 22 28 0.050 R3/8 08 08 17 14 24 12 28 0.01 R1/4 08 13 19 25 12 14.5 30 0.085 R3/8 08 17 19 25.5 12 14.5 30 0.092 12 R1/4 08 12 13 22 2 30 0.114 R3/8 08 12 17 22 27 30 0.117 14 R3/8 08 14 17 24 30 19 35 0.9 R1/2 08 14 21 24 32 19 35 0.1 R3/8 08 17 24 30 19 35 0.147 R1/2 08 21 24 32 19 35 0.5 1 R3/8 08 1 17 27 30 19 21 39 0.190 R1/2 08 1 21 27 33.5 19 21 39 0.203 R1/2 08 21 30 35.5 23 21.5 41 0.270 R3/4 08 27 30 3.5 23 21.5 41 0.292 20 R3/4 08 20 27 32 38 23 21.5 42 0.299 22 R3/4 08 22 27 3 40 27 29 50 0.431 R1 08 22 34 3 44 27 29 50 0.4 Compression Fittings Metric taper threads or NPT threads are available by special order, subject to minimum quantities. 03 Stud Run Tee, Male BSPT Thread C F H max H1 H2 J Kg 4 R1/8 03 04 19 17 9.5 8 0.025 5 R1/8 03 05 12 21 17.5 11 8 0.030 R1/8 03 0 13 22 11 8 0.033 R1/4 03 0 13 13 27 21.5 1 0.04 R1/8 03 08 14 28.5 0.044 8 R1/4 03 08 13 14 28 22 0.049 R3/8 03 08 17 14 28 24 12 0.01 R1/4 03 13 19 30 25 14.5 12 0.084 R3/8 03 17 19 30 25.5 14.5 12 0.091 12 R1/4 03 12 13 22 30 2 0.114 R3/8 03 12 17 22 30 27 0.121 14 R3/8 03 14 17 24 35 30 19 0.11 R1/2 03 14 21 24 35 32 19 0.171 R3/8 03 17 24 35 30 19 0.148 R1/2 03 21 24 35 32 19 0.8 1 R3/8 03 1 17 27 39 30 21 19 0.8 R1/2 03 1 21 27 39 33.5 21 19 0.202 R1/2 03 21 30 41 35.5 21.5 23 0.29 R3/4 03 27 30 41 3.5 21.5 23 0.291 20 R3/4 03 20 27 32 42 38 21.5 23 0.298 22 R3/4 03 22 27 3 50 40 29 27 0.435 Metric taper threads or NPT threads are available by special order, subject to minimum quantities. Compression Fittings Related Products Parker also offers another type of brass compression fi tting: Metrulok, with a one-piece olive/nut. Do not hesitate to contact us. 5-13
Compression Fittings 01, technical polymer Single Banjo with Captive Sealing Washer, Male BSPP Thread C F F1 H H1 max 1 N Kg 4 G1/8 01 04 14 24 9.5 24 14.5 17.5 0.038 5 G1/8 01 05 14 12 24 9.5 25 14.5 17.5 0.041 G1/4 01 05 13 17 12 25 2 1 21 0.058 G1/8 01 0 14 13 24 9.5 25 14.5 17.5 0.041 G1/4 01 0 13 17 13 25 2 1 21 0.05 G1/8 01 08 14 14 24 9.5 28.5 17.5 0.055 8 G1/4 01 08 13 17 14 25 28.5 21 0.058 G3/8 01 08 17 22 14 32 13 30 2.5 0.1 G1/4 01 13 17 19 31 13 34 19 23 0.117 G3/8 01 17 22 19 32 13 34 19 2.5 0.125 12 G1/4 01 12 13 17 22 34 14.5 34 19 23 0.12 G3/8 01 12 17 22 22 35 14.5 34 19 2.5 0.138 G1/4 01 14 13 17 24 37 1 37 20.5 28 0.4 14 G3/8 01 14 17 22 24 38 1 37 20.5 28 0.202 G1/2 01 14 21 27 24 40 1 38 20.5 32.5 0.202 G3/8 01 17 22 24 38 1 37 20.5 28 0.9 G1/2 01 21 27 24 40 1 38 20.5 32.5 0.19 1 G1/2 01 1 21 27 27 42 1 38 21 32.5 0.219 G1/2 01 21 27 30 4 19.5 43 24.5 3 0.32 20 G3/4 01 20 27 32 32 49 20 44 24.5 39 0.40 22 G3/4 01 22 27 32 3 53 22 45 24.5 39 0.454 Thread with pre-assembled washer Sealing washers 002 can be found in chapter 9. 01..39, zinc-plated steel with NBR seal Single Banjo with Bi-Material Seal, Male BSPP Thread C F F1 H H1 max 1 N Kg 4 G1/8 01 04 39 14 23 9.5 24 14.5 17.5 0.039 5 G1/8 01 05 39 14 12 23 9.5 25 14.5 17.5 0.041 G1/4 01 05 13 39 17 12 24 2 1 21 0.04 G1/8 01 0 39 14 13 23 9.5 25 14.5 17.5 0.042 G1/4 01 0 13 39 17 13 24 2 1 21 0.057 G1/8 01 08 39 14 14 23 9.5 28.5 17.5 0.05 8 G1/4 01 08 13 39 17 14 24 28.5 21 0.059 G3/8 01 08 17 39 22 14 31.5 13.5 30 2.5 0.113 G1/4 01 13 39 17 19 30 13 34 19 23 0.119 G3/8 01 17 39 22 19 31.5 13.5 34 19 2.5 0.127 12 G1/4 01 12 13 39 17 22 33 14.5 34 19 23 0.12 G3/8 01 12 17 39 22 22 34.5 34 19 2.5 0.13 G1/4 01 14 13 39 17 24 3 1 37 20.5 28 0.190 14 G3/8 01 14 17 39 22 24 37.5 1.5 37 20.5 28 0.198 G1/2 01 14 21 39 27 24 39 1.5 38 20.5 32.5 0.20 G1/2 01 21 39 27 24 40 1.5 38 20.5 32.5 0.202 1 G1/2 01 1 21 39 27 27 40 1.5 38 21 32.5 0.222 G1/2 01 21 39 27 30 47 20 43 24.5 3 0.35 20 G3/4 01 20 27 39 32 32 50 20.5 44 24.5 39 0.394 22 G3/4 01 22 27 39 32 3 54 22.5 45 24.5 39 0.42 With bi-material sealing washer The bi-material sealing washers, part number 0139, can be found in chapter 9. 5-14
Compression Fittings 0119, technical polymer Double Banjo with Captive Sealing Washer, Male BSPP Thread C F F1 H H1 1 /2 N Kg 4 G1/8 0119 04 14 24 9.5 14.5 24 17.5 0.051 G1/8 0119 0 14 13 24 9.5 14.5 25 17.5 0.05 G1/4 0119 0 13 17 13 25 1 2.5 21 0.073 G1/8 0119 08 14 14 24 9.5.5 28 17.5 0.070 8 G1/4 0119 08 13 17 14 25.5 28 21 0.075 G3/8 0119 08 17 22 14 32 13 30.5 2.5 0.140 G1/4 0119 13 17 19 31 13 19 34 23 0. G3/8 0119 17 22 19 32 13 19 34 2.5 0.173 12 G1/4 0119 12 13 17 22 34 14.5 19 34 23 0.173 G3/8 0119 12 17 22 22 35 14.5 19 34 2.5 0.2 G1/4 0119 14 13 17 24 37 1 20.5 37.5 28 0.24 14 G3/8 0119 14 17 22 24 38 1 20.5 37.5 28 0.245 G1/2 0119 14 21 27 24 40 1 20.5 38 32.5 0.219 Thread with pre-assembled washer Sealing washers 002 can be found in Chapter 9. Compression Fittings 0119..39, zinc-plated steel with NBR seal Double Banjo with Bi-Material Seal, Male BSPP Thread C F F1 H H1 1 /2 N Kg 4 G1/8 0119 04 39 14 23 9.5 14.5 24 17.5 0.050 5 G1/8 0119 05 39 14 12 23 9.5 14.5 25 17.5 0.049 G1/4 0119 05 13 39 17 12 24 12 2 21 0.072 G1/8 0119 0 39 14 13 23 9.5 14.5 25 17.5 0.057 G1/4 0119 0 13 39 17 13 24 1 2 21 0.071 G1/8 0119 08 39 14 14 23 9.5.5 28 17.5 0.071 8 G1/4 0119 08 13 39 17 14 24.5 28 21 0.075 G3/8 0119 08 17 39 22 14 31.5 13.5 30 2.5 0.137 G1/4 0119 13 39 17 19 30 13 19 34 23 0. G3/8 0119 17 39 22 19 31.5 13.5 19 34 2.5 0.17 12 G1/4 0119 12 13 39 17 22 33 14.5 19 34 23 0.0 G1/4 0119 14 13 39 17 24 3 1 20.5 37 28 0.248 14 G3/8 0119 14 17 39 22 24 37.5 1.5 20.5 37 28 0.247 G1/2 0119 14 21 39 27 24 39 1.5 20.5 38 32.5 0.21 G3/8 0119 17 39 22 24 37.5 1.5 20.5 37 28 0.24 G1/2 0119 21 39 27 24 40 1.5 20.5 38 32.5 0.251 G1/2 0119 21 39 27 30 47 20 24.5 43 3 0.471 20 G3/4 0119 20 27 39 32 32 50 20.5 24.5 44 39 0.38 22 G3/4 0119 22 27 39 32 3 54 22.5 24.5 45 39 0. Thread with pre-assembled washer Bi-material sealing washers, part number 0139, can be found in Chapter 9. Compression Fittings 0 Equal Tube-to-Tube Connector F F1 max 1 Kg 4 0 04 00 28 0.017 5 0 05 00 11 12 31 11 0.024 0 0 00 11 13 32 11 0.02 8 0 08 00 13 14 3 0.031 0 00 17 19 42 13 0.070 12 0 12 00 19 22 42 13 0.091 14 0 14 00 22 24 45 11 0.3 0 00 22 24 45 11 0.098 1 0 1 00 24 27 48 13 0.142 0 00 27 30 53 14 0.8 20 0 20 00 30 32 5 14 0.2 22 0 22 00 32 3 0 14 0.282 25 0 25 00 3 41 4 14 0.401 28 0 28 00 41 42 4 14 0.397 5-
Compression Fittings 0113 Equal Tube-to-Tube Connector with Mounting Boss F H H1 1 /2 N Kg 4 0113 04 00.5 7 9.5 19 0.021 0113 0 00 13 13 9 20.5 7 0.033 8 0113 08 00 14 14.5 9.5 11 23.5 8 0.040 0113 00 19 19.5 12.5 11 2 9 0.081 12 0113 12 00 22 22 14 12 2.5 11 0.8 14 0113 14 00 24 25 1 11 28 12 0.124 011 Equal Bulkhead Connector F F1 F2 max max 1 3 ØT min Kg 4 011 04 00 13 27 17 7 17 8.3 0.024 5 011 05 00 13 12 14 28 7.5 17.5.3 0.035 011 0 00 13 13 14 28 19 7.5 17.5.3 0.037 8 011 08 00 14 14 17 29 20 7 17 12.3 0.045 011 00 19 19 22 33 25 9 19 1.5 0.0 12 011 12 00 22 22 22 33 25 9 19.5 0.121 14 011 14 00 24 24 27 35 25 8 20.5 0.144 011 00 24 24 24 35 25 8 20.5 0.134 1 011 1 00 27 27 27 3 28 9.5 19.5 22.5 0.8 011 00 27 30 30 40 30.5 20.5 24.5 0.238 20 011 20 00 32 30 32 41 31 11 21 27.5 0.275 22 011 22 00 3 3 3 42 32 11 21 30.5 0.37 25 011 25 00 3 41 38 4 3 11 21 33.5 0.479 02 Equal Elbow F J max Kg 4 02 04 00 5 19 0.01 5 02 05 00 12 8 21 0.025 02 0 00 13 8 22 0.027 8 02 08 00 14 28 0.038 02 00 19 12 30 0.072 12 02 12 00 22 30 0.098 14 02 14 00 24 19 35 0.133 02 00 24 19 35 0.123 1 02 1 00 27 19 39 0. 02 00 30 23 41 0.230 20 02 20 00 32 23 42 0.23 22 02 22 00 3 27 50 0.373 25 02 25 00 41 27 54 0.452 28 02 28 00 42 32 54.5 0.474 Related Products Parker also offers another type of brass compression fi tting: Metrulok, with a one-piece olive/nut. Do not hesitate to contact us. 5-1
Compression Fittings 04 Equal Tee F H J /2 Kg 4 04 04 00 9.5 8 19 0.028 5 04 05 00 12 11 8 21 0.03 04 0 00 13 11 8 22 0.040 8 04 08 00 14 28 0.055 04 00 19 14.5 12 30 0.5 12 04 12 00 22 30 0.141 14 04 14 00 24 19 35 0. 04 00 24 19 35 0.174 1 04 1 00 27 21 19 39 0.234 04 00 30 21.5 23 41 0.319 20 04 20 00 32 21.5 23 42 0.330 22 04 22 00 3 29 27 50 0.51 25 04 25 00 41 29 27 54 0.37 28 04 28 00 42 30 32 55 0.1 Compression Fittings 0142 Equal Y Piece with Mounting Boss 07 Equal Cross F H max H1 max 1 ØT Kg 4 0142 04 00 1.5 7 2.5 17 4.2 0.032 0142 0 00 13 19.5 8.5 28 17 4.2 0.049 8 0142 08 00 14 21 8 30 17.2 0.01 0142 00 19 24.5 9 37.5 22.2 0.128 12 0142 12 00 22 2 11 38 23.2 0.1 14 0142 14 00 24 28 11 41.5 24.5.2 0.201 0142 00 24 28 11 41.5 24.5.2 0.204 1 0142 1 00 27 30 12 43 25.2 0.252 0142 00 30 31.5 12 50.5 31.2 0.353 Compression Fittings F H J /2 Kg 4 07 04 00 9.5 8 19 0.035 5 07 05 00 12 11 8 21 0.047 07 0 00 13 11 8 22 0.052 8 07 08 00 14 11 28 0.074 07 00 19 14.5 14 30 0.142 12 07 12 00 22 35 0.234 14 07 14 00 24 20 35 0.24 07 00 24 20 35 0.224 1 07 1 00 27 21 20 39 0.309 07 00 30 21.5 25 41 0.423 20 07 20 00 32 21.5 25 42 0.429 22 07 22 00 3 29 27 50 0.70 25 07 25 00 41 29 27 50 0.833 5-17
Complementary Fittings Reducers, Olives and Nuts This innovative reducer system, using a full range of nuts and olives, enables different diameters of steel, copper, brass or polymer tubes to be fitted onto a single Parker egris compression fitting. Product Advantages Efficient Solution Reduces envelope dimensions Quick and easy to assemble, whatever the diameters and tube material Improved stock management Multiple Combinations Silicone-free A single connector for up to 4 different tube materials and sizes Example: polymer tube 4 mm O.D. copper tube 8 mm O.D. brass tube 12 mm O.D. braided PVC hose 12 mm I.D. A full range of olives and nuts to optimise all assembly operations Pneumatics Cooling Automotive Process ubrication Fluid Transmission Packaging Industrial Machinery Applictions Regulations DI: 97/23/EC (PED) RG: 1907/200 (REACH) DI: 2002/95/EC (RoHS) DI: 94/9/EC (ATEX) Reducer Assembly Procedure Operation Assembly Sequence Assembled Fitting 1 Assemble the reducer Place the reducer in the fitting body. 1 2 Assemble the nut and olive Place the nut and then the olive onto the tube. 2 3 Assemble the nut Push the tubing into the fitting until it butts against the tube reducer. Tighten the nut to the recommended torque (see opposite page). 3 5-
Complementary Fittings Assembly Configuration The table and information given below illustrate the large number of options available with Parker egris brass compression fittings. To these must be added the advantages specific to the original Parker egris reducer shown on the previous page. Body 01 No olive required to assemble the plug 0124 0111 BNA** 01..0 0124 0111 BNA** 01..40 Steel 0124 40 Steel 01..70* Polymer No olive required to assemble the tube Compression Fittings plug: 012 Copper, coldrolled brass, polymer tube and barb connectors 0122 and 0 Coiled annealed copper tube Cold-rolled copper tube for vibration and side loading, etc. Coiled annealed copper tube for vibration and side loading, etc. Steel or copper tube: low/medium hydraulic pressure, lubricate before assembly Polymer tube *Assembly specifications for nut-olive 01..70 This part functions as both olive and nut for flexible polymer tube assemblies: 1. Hand tighten the polymer nut-olive a few turns onto the body of the fitting; the knurling makes this easier. 2. Then introduce the polymer tube and push home into the body of the fitting. 3. Continue manually tightening the polymer nut-olive. 4. Finish tightening using a spanner until the nut body disengages and turns freely, which acts as a torque limiter. N.B.: To avoid damaging the threads, do not insert the tube before hand tightening the nut-olive into the body of the fitting. **Bureau de Normalisation de l'automobile (French Automotive Bureau of Standards) Compression Fittings Recommended Tightening Torque Tightening torque in dan.m = maximum tightening torque of a 01 nut and 0124 olive with copper, brass or steel tube. Nut 01 and 01..40 C F Nut 01..0 C F Ø D (mm) F 01 F 01..0 max. dan.m copper or brass F 01..40 max. dan.m steel 4 11 0.7 1.5 5 12 13 0.7 12 1.5 13 13 1.5 13 2.5 8 14 1 1.5 14 2.5 19 20 1.8 19 3 12 22 22 3 22 4.5 14 24 24 3.5 24 5.5 24 24 4 24 1 27 27 5 27 7 30 30 30 9 20 32 32 32 22 3 3 7 3 12 25 41 41 8 41 13 28 42 9 5-19
Complementary Compression Fittings 01 3-Piece Reducer 1 2 F Kg 5 01 04 05 13 0.011 01 04 0 13 0.011 8 01 04 08 14 0.012 4 01 04 19 0.030 12 01 04 12 22 0.044 14 01 04 14 24 0.054 01 04 24 0.05 01 05 0 13 0.011 8 01 05 08 14 0.012 5 01 05 19 0.030 12 01 05 12 22 0.044 14 01 05 14 24 0.053 1 01 05 1 27 0.078 8 01 0 08 14 0.011 01 0 19 0.030 12 01 0 12 22 0.043 14 01 0 14 24 0.052 01 0 24 0.054 1 01 0 1 27 0.077 01 08 19 0.027 12 01 08 12 22 0.040 8 14 01 08 14 24 0.050 01 08 24 0.052 1 01 08 1 27 0.077 01 08 30 0.099 12 01 12 22 0.037 14 01 14 24 0.045 01 24 0.047 1 01 1 27 0.08 01 30 0.095 20 01 20 32 0.7 22 01 22 3 0.14 25 01 25 41 0.209 14 01 12 14 24 0.042 01 12 24 0.044 1 01 12 1 27 0.0 12 01 12 30 0.091 20 01 12 20 32 0.2 22 01 12 22 3 0.141 25 01 12 25 41 0.200 1 01 14 1 27 0.00 01 14 30 0.085 14 20 01 14 20 32 0.095 22 01 14 22 3 0.134 25 01 14 25 41 0.9 01 30 0.081 22 01 22 3 0.130 01 1 30 0.078 1 20 01 1 20 32 0.087 22 01 1 22 3 0.125 25 01 1 25 41 0.5 20 01 20 32 0.082 22 01 22 3 0.1 25 01 25 41 0.0 28 01 28 42 0.177 20 25 01 20 25 41 0. 22 28 01 22 28 42 0. 1: tube to be fitted 2: for a x mm fitting Each of the above part numbers comprises: - a reduction piece - an olive, PN 0124 - a sleeve nut 5-20
Complementary Compression Fittings 0124 Olive 4 0124 04 00 0.001 5 0124 05 00 0.001 0124 0 00 0.001 8 0124 08 00 0.001 0124 00 0.003 12 0124 12 00 0.004 14 0124 14 00 0.005 0124 00 0.004 1 0124 1 00 0.00 0124 00 0.007 20 0124 20 00 0.009 22 0124 22 00 0.012 25 0124 25 00 0.017 28 0124 28 00 0.017 Kg Compression Fittings 0124..40 Zinc-plated steel Steel Olive 4 0124 04 00 40 0.001 0124 0 00 40 0.001 8 0124 08 00 40 0.001 0124 00 40 0.003 12 0124 12 00 40 0.003 14 0124 14 00 40 0.005 0124 00 40 0.004 1 0124 1 00 40 0.00 0124 00 40 0.007 20 0124 20 00 40 0.008 22 0124 22 00 40 0.0 25 0124 25 00 40 0.014 Kg Compression Fittings 0111 BNA* Olive 4 0111 04 00 0.001 5 0111 05 00 0.001 0111 0 00 0.001 8 0111 08 00 0.001 0111 00 0.002 12 0111 12 00 0.002 14 0111 14 00 0.002 0111 00 0.003 1 0111 1 00 0.003 *Bureau de Normalisation de l'automobile Kg Related Products Parker also offers another type of brass compression fi tting: Metrulok, with a one-piece olive/nut. Do not hesitate to contact us. 5-21
Complementary Compression Fittings 01 Nut C F Kg 4 M8x1 01 04 00 11 0.005 5 Mx1 01 05 00 12 11 0.00 Mx1 01 0 00 13 11 0.008 8 M12x1 01 08 00 14 13 0.009 M1x1.5 01 00 19 0.0 12 Mx1.5 01 12 00 22 0.02 14 M20x1.5 01 14 00 24 0.029 M20x1.5 01 00 24 0.029 1 M22x1.5 01 1 00 27 17 0.042 M24x1.5 01 00 30 0.055 20 M27x1.5 01 20 00 32 0.057 22 M30x1.5 01 22 00 3 19 0.080 25 M33x1.5 01 25 00 41 21 0.121 28 M3x1.5 01 28 00 42 21 0.8 01..40 Zinc-plated steel Steel Nut C F Kg 4 M8x1 01 04 00 40 11 0.004 5 Mx1 01 05 00 40 12 11.5 0.00 Mx1 01 0 00 40 13 12 0.008 8 M12x1 01 08 00 40 14 13.5 0.008 M1x1.5 01 00 40 19 1 0.0 12 Mx1.5 01 12 00 40 22 1.5 0.02 14 M20x1.5 01 14 00 40 24 17 0.030 M20x1.5 01 00 40 24 17 0.030 1 M22x1.5 01 1 00 40 27 0.043 M24x1.5 01 00 40 30 19 0.057 20 M27x1.5 01 20 00 40 32 20.5 0.01 22 M30x1.5 01 22 00 40 3 21.5 0.085 01..0 ong Nut C F Kg 4 M8x1 01 04 00 0 11 14.5 0.007 5 Mx1 01 05 00 0 13 17 0.008 Mx1 01 0 00 0 13 17.5 0.011 8 M12x1 01 08 00 0 1 20 0.019 M1x1.5 01 00 0 20 23 0.032 12 Mx1.5 01 12 00 0 22 25 0.039 14 M20x1.5 01 14 00 0 24 30 0.051 M20x1.5 01 00 0 24 30 0.049 M24x1.5 01 00 0 30 35 0.098 20 M27x1.5 01 20 00 0 32 35 0.2 22 M30x1.5 01 22 00 0 3 3 0.129 01..70 Technical polymer Technical Polymer Nut-Olive C F Kg 4 M8x1 01 04 00 70 8 13 0.008 Mx1 01 0 00 70 11 0.002 8 M12x1 01 08 00 70 13 1 0.002 M1x1.5 01 00 70 17 19 0.004 12 Mx1.5 01 12 00 70 19 19 0.005 14 M20x1.5 01 14 00 70 22 20 0.005 NB: polymer nut-olives should not be used on metal tubes. 5-22