We Keep the World in Motion. Company presentation www.elinmotoren.at January 2018
... in Motion. What you can expect from ELIN Motoren: high industrial standards based on decades of experience highest quality drive solutions at competitive prices application know-how in the defined market sectors the commitment of an innovative company personal customer service at all levels after sales services & life cycle support Page 2
A Global Player for Electrical Drives TRASYS Beteiligungs- und Management GmbH Generators for wind energy and decentralized energy systems Motors for industrial plant applications, marine, oil & gas, power plants, plastics & tunneling AC traction motors air and liquid cooled Traction drives (motor and gear) Traction generators, synchronous and asynchronous ELIN Motors Bosnia d.o.o. (Živinice, BiH) Suzlon Generators Ltd. (Pune, India) Medha Traction Equipment Ltd. (Hyderabad, India) Traktionssysteme Bosnia d.o.o. (Tuzla, BiH) Nordmetal Kft. (Bátonyterenye, Ungarn) Traction Systems Inc. (Somerville, NJ / USA) Page 3
Organisation Page 4
... in motion. Profit from our experience in the following sectors: Industrial Plant Applications Asynchronous motors with squirrel cage and slip ring rotor, motors IP68 and motors for operation with frequency converters for cement plants, opencast mining, steel plants, chemical plants, water & environment, seawater desalination plants, pulp & paper, test rig motors, applications for industrial plants Decentralized Energy Systems Synchronous generators for steam turbines (industrial turbines) Hydro power (small and medium power), gas turbines, gas motors Asynchronous generators for Hydro power (small power) Power Plants Three-phase short circuit motors for operation on mains as well as operation on mechanically or electrically speed regulated drive systems for all forms of large thermal power plants. Page 5
... in motion. Profit from our experience in the following sectors: Plastics & Tunneling Water jacket cooled low voltage motors for tunnel boring, vertical and shaft drill units, underground mining, extruder and compounder, mixer and kneader, injection moulding machines, roller mills, metallurgy, pumps and presses Marine, Oil & Gas Asynchronous and slip ring motors for up-, mid- & downstream solutions, petrochemistry, air separation, compressors and pumps as well as explosion proof applications (Ex n, e, p). Certified solutions for marine applications requirements (ABS, Bureau Veritas, DNV, KR, LR, ) Wind Energy Asynchronous and synchronous generators (conventional, DFIG s, PMG's), On- und offshore Page 6
Power Ranges Wind Energy Three-Phase Squirrel Cage and Slip Ring Generators Plastics Tunneling Mining Three-Phase Squirrel Cage Motors Compressor Drives Industrial Plant Applications Power Plants Three-Phase Squirrel Cage and Slip Ring Motors Decentralized Energy Systems Synchronous & Asynchronous Generators kw / kva 200 500 750 1,000 2,000 2,500 5,000 10,000 20,000 35,000 65,000 Page 7
Service Inspection Diagnostics Documentation Technical Support After Sales Services Spare Parts Maintenance and Maintenance Agreements Repair and Reconditioning of ELIN or other manufacturers products Installation and Commissioning Page 8
Service Technical project management International service and local support by our certified service partners (see above) Full support over the whole life cycle of the machines Page 9
Selected Certificates EN ISO 9001:2015 issued 2017, ISO 9001 original approval in 1996 EN ISO 14001:2015 issued 2017, ISO 14001 original approval in 2016 BS OHSAS 18001:2007 issued 2017, OHSAS 18001 original approval in 2011 Underwriters Labs, issued 2001 ATEX Compliance, issued 2003, renewed 2017 ANZEx, issued 2006 Certificate according to ISO 3834-2, issued 2017, original approval in 2012 Certificates for Marine (ABS, BV, DNV, KR, LR, ) Page 10 EN ISO 9001:2015
History Foundation of F. Pichler Werke / Weiz 1892 Renamed ELIN 1908 ELIN becomes a 100 % subsidiary of the newly founded Austrian Industries AG (which is 100 % owned by ÖIAG) 1989 ELIN Motoren becomes an independent company within VA Technologie AG, which itself was spun off from Austrian Industries AG 1993 Going public of VA Technologie AG (Vienna Stock Exchange) 1994 TRASYS buys 80,1% shares of ELIN Motoren GmbH 2002 Joint Venture with Suzlon Generators Ltd., Pune / India 2004 TRASYS becomes 100% owner of ELIN Motoren GmbH 2005 New premises in Preding/Weiz 2009 Foundation of the subsidiary ELIN Motors Bosnia d.o.o., Živinice/BiH 2015 Acquisition of Nordmetal Kft., Bátonyterenye/H 2017 Page 11
Preding/Weiz Research and Production Centre: built in 2008 Plant area: 50,000 m² Production: 17,000 m² Offices: 5,000 m² Height of shop floor: up to 12 m Length: 240 m Width: 70 m Crane capacity: up to 80 to, 8.25 m Connected load: 5 MW Page 12
Lamination Shop Lamination Shop: built in 2001 Plant area: 3,000 m² Production: 2,000 m² Warehouse: 1,000 m² Crane capacity: up to 25 to, 8.5 m Page 13
Test Field Testing of synchronous, asynchronous and direct current machines Feed voltage: AC: 400 V up to 15 kv DC: up to 600 V Power: up to 6 MW direct coupling Alternative load testing for asynchronous machines up to 15 MW Alternative testing for synchronous machines up to 65 MVA Page 14
All our efforts revolve around our customers' success. Page 15
Project: Boxberg Power Plant Block R - BFP Location: Germany Year: 2009 Type: HKM110D04 Power: 13500 kw Voltage: 10 kv Frequency: 50 Hz Speed: 1478 rpm Cooling: Air / water cooled Quantity: 1 piece Application: Pump Highlight: Start-up at 75 % of the nominal voltage against full resisting moment of the pump. Best efficiency (>97 %) at 75 % of the nominal power (usual operation point of this application) Copyright: Vattenfall Europe Page 16
Project: Moorburg ID-Fan Location: Hamburg, Germany Year: 2012 Type: HKM111Z10 Power: 11000 kw Voltage: 10 kv Frequency: 50 Hz Speed: 592 rpm Cooling: Air / water cooled Quantity: 2 pieces Application: Fan Highlight: Power plant design standard: Start-up after voltage drop against open valve and partial voltage 80 % with reduced start-up current. Focus on low noise level. Page 17
Project: White Nile Sugar Location: Sudan Year: 2006 Type: HRH-063 P14 Power: 960 kw Voltage: 3.3 kv Frequency: 50 Hz Speed: 421 rpm Cooling: Exhaust air discharged by a conduit Quantity: 20 pieces Application: Pipe cased shaft pump Highlight: Vertical installation on pipe cased shaft pump with low vibrations (between 0.12 and 0.48 mm/sec measured) / automatic brush lifting device Page 18
Project: Sarooj Busher Location: Iran Year: 2006 Type: HRR-010 Z06 (526096) Power: 4300 kw Voltage: 6300V Frequency: 50 Hz Speed: 992 rpm Cooling: Tube cooled Quantity: 1 pc Application: Raw Mill Highlight: 2nd shaft end Amb. Temp.: 50 C Page 19
Project: Test Bench Drives Location: Germany Year: 2012 Type: HKF and MKH Power: 620 kw 3200 kw Voltage: 690 V 3.3 kv Frequency: 50 / 60 Hz Speed: 0-3000 rpm Cooling: Air/Water & forced ventilation and water jacked Quantity: 11 pieces Application: Test field Page 20
Project: 8 TBM Crossrail Location: Great Britain Year: since 2011 Type: MKH428W04 Power: 160 kw Voltage: 400 V Cooling: water cooled Quantity: Totally 82 Motors Appliance: Cutter Head Drive Page 21
Project: Mining and Tunneling Location: Worldwide Year: since 1975 Type: dmcv, dprw, dmkh Power: 100 400 kw Voltage: 400 1140 V Cooling: water cooled Protectionclass: ATEX EN 60079 Appliance: Cutter Head and Hydraulic Page 22
Project: Extruder for thermoplastic Location: Worldwide Year: since 2000 Type: various MKH-7/8 Power: 30 1320 kw Voltage: 380 690 V Cooling: water - cooled Appliance: Extruder Leistritz Page 23
Project: Siemens / POSCO Korea Location: Korea Year: 2012 Type: HRM-080 C04 Power: 7,850 kw Voltage: 6,000 V Frequency: 60 Hz Cooling: Air/ Water Quantity: 3 Application: Turbo compressor Siemens Highlight: KOSHA Design Exp IIC Zone2 design Brush lifting device Start via liquid starter Page 24
Project: GEA / LUKOIL - Krasnodar Location: Russia Year: 2010 Type: HKM-171 E02 Power: 5,300 kw Voltage: 6,000 V Cooling: Air/ Water Quantity: 3 Application: Cameron Compressor Highlight: Exp IIB T3, Zone2 Balancing G0,8 Shaft vibration max. 25µm p-p High level of auxiliaries Starting current 3,9xFLC via soft starter GOST+ RTN Page 25
Project: LMF / Western GECO Location: all over the world Year: 2012 Type: MCZ-545 N04 Power: 1,400 kw Voltage: 690 V Cooling: Water Jacket cooled Quantity: 3 Application: Reciprocating compressor Highlight: DNV Certified Double shaft end IM2202 Flange mounted Operation on exploration ships Page 26
Project: Windpark Janneby Location: Germany Year: 2013 Type: MRM-063 Z06 Power: 3,100 / 3,400 kw Voltage: 660 V Speed: 1,010 rpm Cooling: Air / water Application: Nordex N100 / N117 / N131 turbines Page 27
Project: Windpark Donghai bridge (Off-shore) Location: China Year: 2011 Type: HRM-171 Z06 Power: 5,300 kw Voltage: 6.3 kv Speed: 1,006 rpm Cooling: Air / water Application: Sinovel SL 5000 Page 28
Project: Torsvik Location: Torsvik, Schweden Year: 2004 Type: HTM-110 D04 Power: 18,300 kva Voltage: 10.5 kv Speed: 1,500 rpm Cooling: Air - Water Application: Steam turbine (generator mounted gearbox) Page 29
Project: Envesta Energie- & Dienstleistungs GmbH Location: KW Johnsbach Year: 1958 Service: Stator winding, new collector, 2011 Type: Sy 4004 / E26 Power: 700 kva Voltage: 400 V Current: 1010 A Frequency: 50 Hz Speed: 1,500 rpm Make: ELIN Page 30
Project: KW Gaulwerk Location: Imst Year: 1982 Service: Overhaul of synchronous generator, 2011 Type: S 20012 Power: 1,000 kva Voltage: 5,250 V Current: 318 A Frequency: 50 Hz Speed: 500 rpm Make: ELIN Page 31
Project: KW Offensee 1 Location: Ebensee Year: 1908 Service: Renewal of stator winding, synchronous rotor Type: Wid 1020/500 Power: 1,200 kva Voltage: 3,000 V Current: 231 A Frequency: 50 Hz Speed: 500 rpm Make: SSW Page 32