Beach Wheelchair and Accessories Corporate Offices: 203 Arlington Ave Lakewood, NJ 08701 Mailing address: 1995 Rutgers University Blvd. Lakewood, NJ 08701 Tel: 732-348-0312 Fax: 732-348-0412 Email: state@govsupplies.com Web: www.govsupplies.com
Contents Beach Wheelchair Stainless Steel.2-3 Beach Wheelchair Options.4 Beach Wheelchair Accessories 5 Stainless Steel Pool Wheelchair..6 PVC Beach Wheelchair..7 WaterWheels 8 Beach Walkers.9
Beach Wheelchairs Standard DeBug Beach Wheelchair De-Bug frame is constructed using #316L Stainless Steel tubing which is a higher grade than standard "#304 marine grade" stainless. * Weight capacity 350 pounds standard, weight capacities up to 600 pounds can be accommodated for a nominal fee. * Casters - rear wheels rotate 360 degrees. Wheel hubs are made from poly-nylon material to eliminate salt water corrosion. * The rear suspension also articulates +/- ~20 degrees, allowing all four wheels to remain in contact with the ground when going across uneven terrain, making it much more stable than standard outdoor wheelchairs. * Swing away arm rests are also easily removable for Lateral transfers. * Footrest-Has Linear position telescopic length adjustment and four position angle adjustment. The De-Bug also has a footrest for proper foot support. * Wheel Lock - Adjustable tension wheel brake can be actuated independently on each side, uses all #316L stainless steel hardware. * Chair weight - Forty pounds for a standard adult chair * Chair width is ~33.5 inches to access a 36 inch doorway and is ~27 inches wide with the optional interchangeable pool wheels. * Chair design is patented in the U.S. #380,991 and registered with agencies, and insurance companies.
Beach Wheelchairs Deluxe DeBug Wheelchair with Elevating Footrests De-Bug frame is constructed using #316L Stainless Steel tubing which is a higher grade than standard "#304 marine grade" stainless. * Weight capacity 350 pounds standard, weight capacities up to 600 pounds can be accommodated for a nominal fee. * Casters - rear wheels rotate 360 degrees. Wheel hubs are made from poly-nylon material to eliminate salt water corrosion. * The rear suspension also articulates +/- ~20 degrees, allowing all four wheels to remain in contact with the ground when going across uneven terrain, making it much more stable than standard outdoor wheelchairs. * Swing away arm rests are also easily removable for Lateral transfers. * Footrest-Has Linear position telescopic length adjustment and four position angle adjustment. The De-Bug also has a footrest for proper foot support. * Wheel Lock - Adjustable tension wheel brake can be actuated independently on each side, uses all #316L stainless steel hardware. * Chair weight - Forty pounds for a standard adult chair * Chair width is ~33.5 inches to access a 36 inch doorway and is ~27 inches wide with the optional interchangeable pool wheels. * Chair design is patented in the U.S. #380,991 and registered with agencies, and insurance companies.
Beach Wheelchair Options Tilt In Place Allows the chair to tilt on it s axis. Chair reclines smoothly and comfortably. Reclining Back Allows the chair to fully recline, allowing the user to get comfortable and take a tan!
Beach Wheelchair Accessories Interchangeable Street/ Pool Wheel for front wheels. Rear axle is extra Chest Strap with D- Ring Release Powder coating Available. Your choice of colors! Swing Away Lateral Supports Umbrella with swiveling stainless steel holder Butterfly Chest Strap Concave Headrest 3 Piece Headrest Stainless steel Quick Release Pins 2 Piece Cushion Fishing Pole Holder Drink Holder
Stainless Steel PoolWheelchair Will bring commercial pools in compliance with new ADA Swimming Pool Guidelines. The DeBug Beach Wheelchair easily converts into a pool wheelchair without the need for any tools! With a single pin convert the beach wheelchair to a pool wheelchair. All you need to do is remove the tires and replace them with the pool tires. The exchange takes only a minute or two. This pool chair is totally submersible and can be used for easy transfers or just to enjoy the water. Great, for Pools, Showers, and even as a manual, street wheelchair. Just reverse the exchange to convert back into a regular beach wheelchair.
PVC Beach Wheelchair These sturdy, light weight, all terrain beach chairs allow easier access in sand, snow and other soft soils. Our balloon flotation tires allow for extra stability and easy rolling. Our two chairs are made of durable PVC construction and non-corrosive wheels. Because it is made with a high-quality UV protected PVC frame, you can even take it right into the salt water. It won t chip, peel, rust, fade or discolor. Two models are available: The standard PVCBW-2 has two large wheels in the front and two smaller wheels in the rear which allow better steering, as the rear axle rotates, while the PVCBW-4 model has four large wheels which make it easier to push. The PVCBW-2 and PVCBW-4 disassemble into 3 pieces (base, seat, wheels) for easy transport, with the use of quick-action pins that you pull out. Both of our beach chairs come with the following characteristics and features: Stainless steel hardware Single motion parking brakes 6ft (1.8mtr) 8 panel umbrella Adjustable safety belt, cushion seat & storage Storage bag included Sliding footrest with a foot plate Furniture-grade UV protected PVC frame will not rust, chip, discolor or peel even when used in salty sea water Comfortable cushion seat covered with tough outdoor fabrics in your choice of colors and designs 41 high x 34½ wide x 41 deep Seat height 25 Seat width 21 between arms 250lb (113-kg) weight capacity Item Number Desription Weight Cap PVCBW-4 PVC Wheelchair 4 Big Wheels 250 LBS PVCBW-2 PVC Wheelchair Swivel Rear Wheels 250 LBS
WaterWheels WaterWheels is a three-wheeled buggy that is designed such that the user remains in a reclined position in an ergonomic chair. The WaterWheels seat has 3 positions, one to transition the user to the chair and two to recline the chair. These are adjusted by pulling a chain on the back for use and floating. The WaterWheels front fork, manufactured of stainless steel with our frame made of aluminum, is designed to absorb the shocks of rough terrains while withstanding the weight of its passenger for repeated use. Our wider backrest, which is made from UV and water resistant fabric, is designed to provide superior comfort while sun bathing and floating. The WaterWheels user must be buckled up in the chair and is then escorted to the water by a companion who must remain with them at all times. User should wear a life jacket going to water. The yellow floating armrests are highly visible to lifeguards, providing piece of mind to any user. Weighing only 60 lbs, WaterWheels accommodates all users from kids to elderly people with a maximum capacity of 250 lbs. Item Number Description Weight Cap BW-150 Floating Beach and Pool Wheelchair 250 LBS
Stainless Steel Beach Walker Specifications Frame: 316L Stainless Steel Tubing Wheels 30cm Wheeleez Wheels Casters Rear are fixed, Front rotate 360 degrees Weight 15lbs to 35lbs Width 30" outside to outside Height Standard 32" can be adjustable. Children sizes are also available Weight Capacity Standard 350lbs Aluminum Beach Walker Specifications Frame Powder Coated Aluminum Wheels in Front 22cm Wheeleez Wheels and 20cm Polycarbonate Wheels in Rear Casters 316l Stainless Steel Weight 28lbs Width clearance 33 inches Height 36.5 inches to 41 inches Weight Capacity 250lbs
All Beach Wheelchairs Are Proudly Made In The U.S.A For more information and to order please contact us! Phone: (732)348-0312 Fax: (732)348-0412 Email : state@govsupplies.com Web: www.govsupplies.com