Abr
Niagara Orinoco Vibrator Volga Shannon 80 Volga fra Material handling hose Abr
56 Abr Niagara :,,. : -40 (-40 F) +70 (+58 F) :,,, SBR/NR,. :. :,, SBR/NR,. : DIN 5356 70+/- 5 mm 3 : IVG Abr : Niagara HD 50. english Plaster hose Application: softwall hose engineered for the spraying of plaster, grout, gypsum and concrete. Available at W.P. of 30 and 40 bar Temperature range: -40 C (-40 F) to +70 C (+58 F) CONSTRUCTION Tube: black antistatic smooth, SBR/NR rubber compound, abrasion resistant. Reinforcement: high strength synthetic cord Cover: black, smooth (wrapped finish) and antistatic SBR/NR rubber compound, abrasion and weathering resistant. Specifications: abrasion loss of the tube rubber compound, according to DIN 5356 70 +/- 5 mm 3 Branding: continuous spiral red brand IVG...Abr... Also available: Niagara HD with harder compound and W.P. 50 bar.
57 30 bar ( ) ( ) CODE inside outside working burst pressure weight diameter diameter pressure (theoretical) (nominal) mm inch mm inch bar psi bar psi kg/m lbs/ft 58724 25 38 -/2 30 450 90 305 0.79 0.53 228625 35-3/8 49-59/64 30 450 90 305 0.96 0.65 247980 40-37/64 53 2-3/32 30 450 90 305.03 0.69 87495 5 2 67 2-4/64 30 450 90 305.55.04 25665 5 2 69.5 2-23/32 30 450 90 305.84.24 Abr Niagara 40 bar 4083 9 3/4 3-7/32 40 600 20 800 0.49 0.33 29653 9 3/4 32 -/4 40 600 20 800 0.57 0.38 37050 25 37-29/64 40 600 20 800 0.59 0.40 06789 25 38 -/2 40 600 20 800 0.70 0.47 06797 25 39-7/32 40 600 20 800 0.73 0.49 29253 32 -/4 44-47/64 40 600 20 800 0.78 0.52 06800 32 -/4 46-3/6 40 600 20 800 0.89 0.60 06827 35-3/8 49-59/64 40 600 20 800 0.98 0.66 06843 35-3/8 5 2 40 600 20 800.3 0.76 06860 38 -/2 54 2-/8 40 600 20 800.2 0.8 0749 38 -/2 56 2-3/64 40 600 20 800.44 0.97 379208 40-37/64 54 2-/8 40 600 20 800.03 0.69 06886 40-37/64 56 2-3/64 40 600 20 800.26 0.85 50723 5 2 68 2-/6 40 600 20 800.72.6 688 5 2 70 2-3/4 40 600 20 800.89.27 06940 65 2-9/6 85 3-/32 40 600 20 800 2.47.66 0773 76 3 98 3-55/64 40 600 20 800 3.0 2.02 359053 76 3 2 4 40 600 20 800 3.73 2.5 07009 90 3-35/64 9.5 4-/6 40 600 20 800 5.0 3.37 30922 0 3-5/6 28 5-3/64 40 600 20 800 5.5 3.46 HD 50 bar 296965 32 -/4 49-49/64 50 750 50 2250.5 0.77 22230 38 -/2 55.5 2-3/64 50 750 50 2250.34 0.90 25736 5 2 69.5 2-22/32 50 750 50 2250.86.25 270737 63.5 2-/2 84.5 3-5/6 50 750 50 2250 2.52.69 22256 76 3 2 4 50 750 50 2250 3.78 2.54 34327 2 4 28 5-3/64 45 675 35 2025 4.97 3.34 max manufactured length up to I.D. m ft mm inch 20 400 2 4 Abr
58 Abr Orinoco :,. Ӏ,. Ӏ, 5. : -40 (-40 F) +70 (+58 F) :,, SBR/NR,. :. :,, SBR/NR,. : DIN 5356 70+/- 5 mm 3 : IVG Abr 2 : Orinoco 2000, DIN 5356 70+/- 5 mm 3. Orinoco 4 T, 4 english Sand blast hose Application: a long-lasting heavy-duty softwall hose exceptionally tough and abrasion resistant, used for the delivery of sand, cast steel shot and abrasive materials in general use in the sand blasting service. It is manufactured with anti-static rubber compound. Available at W.P. of and 5 bar. Temperature range: -40 C (-40 F) to +70 C (+58 F). CONSTRUCTION Tube: black, smooth, antistatic SBR/NR rubber compound, abrasion resistant. Reinforcement: high strength synthetic cord. Cover: black, smooth (wrapped finish), antistatic SBR/NR rubber compound, abrasion resistant. Specifications: Abrasion loss of the tube rubber compound according to DIN 5356 70 +/- 5 mm 3. Branding: continuous spiral red brand IVG...Abr.. 2 Also available: Orinoco 2000, extra resistance to abrasion (DIN 5356 50 +/- 5 mm 3 ). Orinoco 4 T, with 4 cord plies.
59 BAR 5 BAR ( ) ( ) CODE inside outside working burst pressure weight diameter diameter pressure (theoretical) (nominal) mm inch mm inch bar psi bar psi kg/m lbs/ft 29576 3 /2 25 50 30 450 0.39 0.26 3053 3 /2 27 -/6 50 30 450 0.48 0.32 29584 3 /2 28-7/64 50 30 450 0.53 0.36 3088 6 5/8 30-3/6 50 30 450 0.56 0.38 29649 9 3/4 30-3/6 50 30 450 0.47 0.3 29657 9 3/4 33-9/64 50 30 450 0.63 0.42 375644 20 25/32 33-9/64 50 30 450 0.6 0.4 67257 25 39-7/32 50 30 450 0.78 0.52 29720 25 40-37/64 50 30 450 0.49 0.56 67346 25 4-5/8 50 30 450 0.92 0.62 29762 25 48-57/64 50 30 450.45 0.97 29789 30-3/6 45-49/64 50 30 450 0.98 0.66 29835 32 -/4 48-57/64 50 30 450.08 0.73 88009 32 -/4 52 2-3/64 50 30 450.48 0.99 29878 32 -/4 55 2-/64 50 30 450.73.6 208705 38 -/2 52 2-3/64 50 30 450.09 0.73 5370 38 -/2 54 2-/8 50 30 450.24 0.83 29959 38 -/2 56 2-3/64 50 30 450.47 0.99 29967 38 -/2 58 2-9/32 50 30 450.67.2 30035 40-37/64 60 2-3/8 50 30 450.74.7 297449 45-49/64 58 2-9/32 50 30 450.4 0.77 27857 50-3/32 70 2-3/4 50 30 450 2..4 76574 50-3/32 7 2-5/64 50 30 450 2.20.47 96400 5 2 67 2-4/64 50 30 450.60.08 27 5 2 70 2-3/4 50 30 450.96.32 3032 5 2 7 2-5/64 50 30 450 2.09.40 99 55 2-/64 73 2-7/8 50 30 450 2.02.36 673 60 2-3/8 78 3-5/64 50 30 450 2.5.44 3023 60 2-3/8 80 3-5/32 50 30 450 2.43.63 3022 60 2-3/8 82 3-5/64 50 30 450 2.7.82 97628 63.5 2-/2 83.5 3-7/64 50 30 450 2.55.7 72204 65 2-9/6 84 3-5/6 50 30 450 2.46.65 30248 65 2-9/6 85.5 3-/32 50 30 450 2.60.74 30264 65 2-9/6 89 3-/2 50 30 450 3.7 2.3 30272 70 2-3/4 90 3-35/64 50 30 450 2.74.84 8528 80 3-5/32 3 4-/6 50 30 450 3.6 2.43 30353 80 3-5/32 4-2/64 50 30 450 4.87 3.27 64509 90 3-35/64 5 4-7/32 50 30 450 4.37 2.93 30388 90 3-35/64 20 4-23/32 50 30 450 5.43 3.65 287494 2 4 22 4-3/6 50 30 450 3.75 2.52 209825 3 /2 25 5 225 45 675 0.40 0.26 7448 25 40-37/64 5 225 45 675 0.85 0.57 30760 32 -/4 48-57/64 5 225 45 675.09 0.73 663 38 -/2 54 2-/8 5 225 45 675.23 0.83 Abr Orinoco 2000 2 4T 293990 3 /2 25 2 80 36 540 0.39 0.26 278002 3 /2 27 -/6 2 80 36 540 0.48 0.32 297856 9 3/4 33-9/64 2 80 36 540 0.62 0.42 267264 25 40-37/64 2 80 36 540 0.83 0.56 24243 32 -/4 48-57/64 2 80 36 540.08 0.72 34246 38 -/2 54 2-/8 2 80 36 540.25 0.84 28406 40-37/64 60 2-3/8 2 80 36 540.73.6 3690 5 2 7 2-5/64 2 80 36 540 2..40 362038 60 2-3/8 80 3-5/32 2 80 36 540 2.30.54 277227 65 2-9/6 85 3-/32 2 80 36 540 2.47.65 230034 3 /2 28.5-7/64 50 30 450 0.55 0.37 2742 9 3/4 38 -/2 50 30 450 0.93 0.62 7047 25 48-57/64 50 30 450.45 0.97 86035 32 -/4 55 2-/64 50 30 450.74.7 7055 38 -/2 60 2-3/8 50 30 450.87.26 230050 5 2 73 2-7/8 50 30 450 2.37.59 Abr max manufactured length up to I.D. m ft mm inch 20 400 2 4
60 Abr Vibrator :,. Ӏ.,. 90 75 Shore A. : - (-4 F) +70 (+58 F) :,, SBR/NR. :. :,, SBR/NR,. : IVG : Vibrator CM english Concrete vibrator hose Application: softwall hose suitable for conveying compressed air on concrete vibrators. Used to help settle the concrete layer when building. The hose structure has been engineered to resist kinking. Available with rubber compound of 90 or 75 Shore A hardness. Temperature range: - C (-4 F) to +70 C (+58 F). CONSTRUCTION Tube: black, smooth SBR/NR rubber compound. Reinforcement: high strength synthetic cord. Cover: black, smooth (wrapped finish) SBR/NR rubber compound, weathering resistant. Branding: continuous spiral red brand IVG... Also available: Vibrator CM with plies of steel wire cord.
6 90 SHORE A ( ) ( ) CODE inside outside working burst pressure weight diameter diameter pressure (theoretical) (nominal) mm inch mm inch bar psi bar psi kg/m lbs/ft 96855 6 5/8 26 -/32 5 225 45 675 0.45 0.30 96847 22 7/8 32 -/4 5 225 45 675 0.60 0.40 84288 28-7/64 40-37/64 5 225 45 675 0.85 0.57 96839 30-3/6 42-2/32 5 225 45 675 0.94 0.63 96820 40-37/64 56 2-3/64 5 225 45 675.63. Abr Vibrator 75 SHORE A VIBRATORI CM 368800 20 25/32 34 -/32 5 225 45 675 0.8 0.54 386000* 25 39-7/32 5 225 45 675 0.93 0.62 369547 25 39-7/32 5 225 45 675.08 0.72 37894 30-3/6 44.5-49/64 5 225 45 675. 0.74 364960 9 3/4 3-7/32 5 225 45 675 0.62 0.42 408666 25 39-7/32 5 225 45 675.05 0.70 363905 30-3/6 43 -/6 5 225 45 675.00 0.67 (*) EPDM (*) EPDM ( ) EPDM copertura. ( ) EPDM cover. max manufactured length up to I.D. m ft mm inch 20 400 40-37/64 Abr
62 Abr Volga :,,,.. 5. : -30 (-22 F) +70 (+58 F) :,, NR/ SBR,,,. :,. :,, EPDM,. : DIN 5356: 70 +/- 5 mm 3 : IVG Abr,,,,.. english Bulk materials suction and delivery hose Application: dry materials suction and delivery hardwall hose specially designed for transfer dry cement, sand, gravel, etc. Available at W.P. of 5 or bar. Temperature range: - 30 C (-22 F) to +70 C (+58 F). CONSTRUCTION Tube: black, smooth, NR/SBR rubber compounded for long wear resistance in handling hard, sharp, abrasive materials; it is anti-static. Reinforcement: high strength synthetic cord plus helix wire and anti-static copper wire. Cover: black, smooth, (wrapped finish) EPDM rubber compound, weathering, and ozone resistant. Specifications: Abrasion loss of tube rubber compound according to DIN 5356: 70 +/- 5 mm 3. Branding: continuous spiral red brand IVG..Abr.. Also available with white tube, suitable for abrasive products that must not be stained, such as feed, seed, etc.
63 5 BAR BAR ( ) ( ) CODE inside outside working burst pressure weight bending vacuum diameter diameter pressure (theoretical) (nominal) radius mm inch mm inch bar psi bar psi kg/m lbs/ft mm inch bar 208900 5 2 64.5 2-7/32 5 75 5 225 2.03.36 230 9.0 0.9 34456 76 3 90.5 3-35/64 5 75 5 225 3.00 2.02 360 4. 0.9 34464 80 3-5/32 94 3-45/64 5 75 5 225 3.07 2.07 385 5. 0.9 34472 90 3-35/64 4 4-3/32 5 75 5 225 3.50 2.35 440 7.3 0.9 4004 0 3-5/6 20 4-23/32 5 75 5 225 5.58 3.75 55 20.2 0.9 80784 2 4 8 4-4/64 5 75 5 225 4.78 3.2 55 20.2 0.9 39436 4-2/64 30 5-/8 5 75 5 225 6.2 4. 560 22.0 0.9 292943 4 4-3/64 3 5-5/32 5 75 2 80 5.56 3.74 6 24.0 0.9 34499 20 4-23/32 36 5-23/64 5 75 2 80 5.57 3.74 650 25.6 0.9 372939 27 5 49 5-7/8 5 75 5 225 7.40 4.97 675 26.6 0.9 95344 52 6 73.5 6-3/6 5 75 5 225.8 7.26 835 32.8 0.8 578 203 8 229 9 5 75 5 225 6.30.96 220 48.0 0.7 37292 250 9-27/32 284-3/6 5 75 5 225 24.63 6.55 6 63.3 0.7 3874 305 2 344 3-35/64 5 75 5 225 35.00 23.52 2040 80.3 0.6 70643 5 2 65 2-9/6 50 30 450 2.08.39 230 9.0 0.9 3448 60 2-3/8 76 3 50 30 450 2.74.84 275.8 0.9 255282 76 3 92 3-5/8 50 30 450 3.28 2.20 360 4. 0.9 270257 2 4 20 4-23/32 50 30 450 5.5 3.46 55 20.2 0.9 246690 2 4 22.5 4-3/6 50 30 450 5.03 3.37 55 20.2 0.9 22265 27 5 47 5-5/64 50 30 450 6.7 4.5 675 26.6 0.9 Abr Volga B (white tube) 388509 5 2 65 2-9/6 5 75 5 225 2.05.38 230 9.0 0.9 365487 75 2-6/64 93 3-2/32 5 75 5 225 3.64 2.45 360 4. 0.9 34570 76 3 94 3-45/64 5 75 5 225 3.63 2.44 360 4. 0.9 209698 90 3-35/64 4 4-3/32 5 75 5 225 3.52 2.37 440 7.3 0.9 80555 2 4 8 4-4/64 5 75 5 225 4.75 3.9 55 20.2 0.9 max manufactured length up to I.D. m ft mm inch 20 400 2 4 60 200 203 8 2 40 305 2 Abr
64 Abr Shannon 80 4, 80. :,.. Full Flow. : -40 (-40 F) +70 (+58 F) :,, NR/ SBR,. :. :,, EPDM,. : DIN 5356: 70 +/- 5 mm 3 : IVG Shannon 80r english Concrete placement hose, 4 steel plies, 80 bars W.P. Application: Steel cord hose used for placement of concrete at casting location; it is used at the end of the pumps to distribute the concrete. The hose resists to suction during the cleaning process. Usually supplied with swaged on Full flow hardened couplings. Temperature range: -40 C (-40 F) to +70 C (+58 F) CONSTRUCTION Tube: black, smooth, NR/SBR rubber compound, withstands the abrasive action of the concrete. Reinforcement: plies of steel wire cord. Cover: black, smooth, (wrapped finish), NR/SBR rubber compound, abrasion and weathering resistant. Specifications: abrasion loss of tube rubber compound according to DIN 5356: 50 +/- 5 mm 3. Branding: continuous spiral red brand IVG.. Shannon 80.
65 CODE inside outside working burst pressure weight bending vacuum diameter diameter pressure (theoretical) (nominal) radius (*) 6 (*) 6 steel wires. ( ) ( ) mm inch mm inch bar psi bar psi kg/m lbs/ft mm inch bar 350498 5 2 75 2-6/64 80 200 200 3000 3.96 2.70 380 5 0.8 347470 65 2-9/6 89 3-/2 80 200 200 3000 4.84 3.25 400 6 0.8 345222 76 3 4 4-3/32 80 200 200 3000 6.2 4.7 400 6 0.8 350030 80 3-5/32 8 4-/4 80 200 200 3000 6.48 4.35 450 8 0.8 35792 85 3-/32 4 4-3/64 80 200 200 3000 7.06 4.74 500 20 0.8 333577 0 3-5/6 26 4-3/32 80 200 200 3000 7.5 5.05 550 22 0.8 340255 0 3-5/6 28 5-3/64 80 200 200 3000 7.85 5.27 550 22 0.8 346547 25 4-59/64 53 6-/32 80 200 200 3000 9.67 6.50 700 28 0.8 347020 27 5 55 3-7/64 80 200 200 3000 9.69 6.5 700 28 0.8 343670 * 52 6 86 7-2/64 80 200 75 2625 5.6.8 800 3 0.8 Abr Shannon 80 max manufactured length up to I.D. m ft mm inch 60 200 52 6 Abr
66 Abr Volga fra UNI PN,. :,, -, (,,,.).,. : -30 (-22 F) +70 (+58 F) :,, NR/ SBR,,,. :,. :,, EPDM,. : DIN 5356: 70 +/- 5mm 3. : IVG Abr english Heavy-duty materials suction and delivery hose with over cover UNI PN couplings easy to assemble Application: suction and delivery corrugated, hardwall hose, specially designed to transfer a wide range of abrasive products mixed with water or only dust (sand, gravel, cement, seeds etc.). It can be cut in lengths at the place of work and it has an easy coupling system. Temperature range: - 30 C (-22 F) to +70 C (+58 F). CONSTRUCTION Tube: black, smooth, NR/SBR rubber compounded for long wear resistance in handling hard, sharp, abrasive materials; it is antistatic. Reinforcement: high strength synthetic cord plus embedded helix wire and antistatic copper wire. Cover: black, corrugated (wrapped finish) EPDM rubber compound, weathering and ozone resistant. Specifications: abrasion loss of tube rubber compound according to DIN 5356: 50 +/- 5 mm 3. Branding: continuous spiral red brand IVG...Abr...
67 ( ) ( ) CODE inside outside working burst pressure weight bending vacuum diameter diameter pressure (theoretical) (nominal) radius mm inch mm inch bar psi bar psi kg/m lbs/ft mm inch Bar 332449 5 2 83 3-7/64 50 30 450 3.75 2.58 265 0.9 38390 80 3-5/32 2 4-27/64 50 30 450 5.8 3.90 425 5.7 0.9 322257 0 4 32 5-3/64 50 30 450 6.85 4.60 530 9.6 0.9 320467 25 5 57 6-3/6 50 30 450 8.26 5.55 660 25.6 0.9 320475 50 6 82 7-/64 50 30 450.50 7.73 950 29.5 0.9 324802 200 8 233 9-/64 50 30 450 5.2.6 750 68.9 0.9 33538 250 287-9/64 50 30 450 20.46 3.75 2000 78.7 0.9 max manufactured length up to I.D. m ft mm inch 60 200 200 8 2 40 250 Abr Volga fra Abr
68 Abr Volga fra english Volga fra UNI 2277 PN - DIN 2576. Couplings with flanges for Volga Fra hoses Couplings dimensions according to UNI 2277 PN - DIN 2576. ( ) A B C D N CODE NR. <di> Hose diameter Holes nr. Holes Weight diameter : Materiale: Aluminium Alloy. mm inch mm mm mm mm Kg 4205084 5 2 65 25 90 8 4 8.50 4206584 65 2-9/6 85 45 0 8 4 8.80 4208084 80 3-/8 200 60 20 4 8 2.00 42084 0 4 220 80 2 22 8 8 2.60 422584 25 5 250 2 2 24 8 8 3.20 425084 50 6 285 240 52 24 8 22 4.60 4220084 200 8 340 295 7 26 8 22 7.70 4225084 250 395 350 86 28 2 22 9.60 Volga fra UNI 2277 PN DIN 2576. Standard Gasket for Volga Fra hoses Boring holes according to UNI 2277 PN - DIN 2576. ( ) A B S N CODE NR. <di> Hose diameter Holes nr. Holes Weight diameter mm inch mm mm mm Kg 4705084 5 2 65 25 5 4 8 0.20 4706584 65 2-9/6 85 45 5 4 8 0.20 4708084 80 3-/8 200 60 5 4 8 0.20 47084 0 4 220 80 5 8 8 0.30 472584 25 5 250 2 5 8 8 0.30 475084 50 6 285 240 5 8 22 0.30 4720084 200 8 340 295 5 8 22 0.30 4725084 250 395 350 5 2 22 0.30 NR Solid NR rubber gasket to be used for dry and wet products (plaster or similar).
69 L Volga fra L Gaskets for Volga Fra hoses CODE NR. ( ) <di> Hose diameter D D2 D3 S L mm inch mm mm mm mm mm 47505 5 2 90 44 5 6 6 47655 65 2-9/6 8 58 65 6 6 47805 80 3-/8 25 74 80 6 6 475 0 4 50 93 0 6 6 4725 25 5 80 8 25 6 6 4755 50 6 200 42 50 6 6 47205 200 8 260 90 200 7 20 47255 250 3 240 250 7 20 Abr Volga fra. Clear rubber gasket to be used for conveying dry and wet food products and liquids in general. Abr