0687N November 017 Modular manifolds for domestic water systems with outputs connection 1/ or /4 urocone R580 - R585 R580 R585 escription iacomini has introduced the R585 (with shut-off valve) and R580 (no shut-off valve) series of modular manifolds, in response to the growing demand for products for the distribution of domestic water which offer ease of installation, operational reliability and more generally, excellent attention to detail, contributing to an increased level of quality perceived by the users. Versions and product codes Series Size R580 R585 daptor seat Ø No. of outlets R580Y06 R580Y06 /4 M x 1/ (SO 8) 16 R580Y064 4 R580Y05 R580Y05 1 M x /4 (SO 8) 18 R580Y054 4 R585Y06 R585Y06 /4 M x 1/ (SO 8) 16 R585Y064 4 ompletion codes daptors for /4 M x 1/ manifolds (adapter seat Ø 16 mm) - or synthetic or multilayer pipes: R179Y05: 1/ x (16 x 1,8) R179Y055: 1/ x (16 x ) R179Y056: 1/ x (16 x,) R179Y058: 1/ x (16, x,6) RM179Y11: 1/ x (16 x ) RM179Y116: 1/ x (0 x ) - or copper pipes: R178Y11: 1/ x 10 R178Y1: 1/ x 1 R178Y1: 1/ x 14 R178Y14: 1/ x 15 R178Y15: 1/ x 16 daptors for 1 M x /4 manifolds - or synthetic or multilayer pipes: R179X01: /4 x (1 x 1,5) R179X0: /4 x (14 x ) R179X0: /4 x (16 x 1,5) R179Y08: /4 x (16 x 1,8) R179X04: /4 x (16 x ) R179X05: /4 x (17 x ) R179X06: /4 x (18 x ) R179X07: /4 x (0 x ) RM179X10: /4 x (16 x ) RM179X106: /4 x (0 x ) - or copper pipes: R178X11: /4 x 1 R178X11: /4 x 14 R178X104: /4 x 15 R178X115: /4 x 16 R178X116: /4 x 18 Plastic cabinet Y001: 400 x 00 x 90 mm R598 support kit for cabinet R598Y001: /4 R598Y00: 1 Plastic cabinet R595 R595Y001: 70 x 00 x 90 mm R595Y001: 50 x 00 x 90 mm R595Y001: 670 x 00 x 90 mm R598 support kit for R595 cabinet R598Y007: /4 1
0687N November 017 Modular manifolds for domestic water systems with outputs connection 1/ or /4 urocone R580 - R585 Technical data Temperature range: 5 100 Max. working pressure: 10 bar Outlets centre distance for /4 M x 1/ manifolds: 5 mm Outlets centre distance for 1 M x /4 manifolds: 40 mm Main features osses of pressure 1000 0,95 5,11 6,9 p [mm H O] 100 10 10 100 1000 10000 Q [l/h] Manifold v R580 /4 x 1/ 5,11 R580 1 x /4 6,9 R585 /4 x 1/ + RM179Y11 adaptor 0,95 The manifolds are produced using a moulded body, which gives them a combination of extreme solidity and reduced roughness, obtained by machining to remove burrs on all interior surfaces. When looking at a crosssection of the R585 manifold, it is evident that the connecting sections have been designed to obtain the widest passage possible. n addition, the reliability of the shutter closure is guaranteed by the presence of an PM gasket for the front seal. The shut-off valve is made in two pieces, so the bulk of the manifold is independent of the shutter position and does not obstruct it; this feature ensures that under normal operating conditions (i.e. with the shut-off valves fully or partially open) the handwheels do not prevent the containment cabinet door from closing properly. On modular manifolds R585 and R580, no surface finishing treatment is used, with a view to minimizing the amount of impurities in the alloy, thus complying with the requirements set out by the uropean irective 98/8, adopted in taly with the Ministry of Health ecree of pril 6 004, no. 174 - "Regulation on the materials and articles which can be used in fixed systems for the collection, treatment, supply and distribution of water intended for human consumption", as published in O.J. no. 166 on 17 July 004, and which entered into force on 17 July 007. The handwheels, connected to the shut-off valve with a screw, feature two plates: one of these plates indicates the corresponding user; the other plate is superimposed over the previous one, and is blue on one side and red on the other, so that users can immediately see whether the manifold is circulating hot water or cold water. This also allows to optimise the quantity of products in the warehouse. daptors for connecting piping to the manifold outlets R179 RM179 Note. With manifolds: R580Y06, R580Y06, R580Y064, R585Y06, R585Y06, R585Y064 (adaptor seat Ø 16 mm) only adaptors R179Y05, R179Y055, R179Y056, R179Y058, RM179Y11, RM179Y116, R178Y11, R178Y1, R178Y1, R178Y14, R178Y15 can be used. With manifolds: R580Y05, R580Y05, R580Y054 only adaptors R179X01, R179X0, R179X0, R179X04, R179X05, R179X06, R179X07, R179Y08, RM179X10, RM179X106, R178X11, R178X11, R178X104, R178X115, R178X116 can be used.
0687N November 017 Modular manifolds for domestic water systems with outputs connection 1/ or /4 urocone R580 - R585 nstallation cabinet installation The assembly of the manifolds inside the cabinet using the appropriate R598 sliding supports is carried out using horizontal guide rails, and therefore without constraints on positioning. n addition, by taking advantage of the large openings in the lower part of the cabinet, users can easily install manifolds with different centre distances. The cabinet door can be opened without the need of special tools, with a view to enabling rapid intervention to be carried out on the shut-off valves, whilst closure is maintained by the solid joints attached to the surface of the frame. R595 cabinet installation Warning. n the R595 cabinets can be fitted only the manifolds of /4 size and centre distance of 5 mm. The manifolds (/4, centre distance 5 mm) can also be assembled in R595 cabinets, using the R598 supports. n this case, the supports are attached to the fixed guides in the cabinet, for this reason only manifolds with a centre distance of 5 mm can be fitted into these cabinets. The opening and closure of the door is performed by loosening and tightening the screws provided with the cabinet. R595 R598 R598 xample xample R585/ + R585/ R585/ + R585/ R595 R594 R59 R594 R59 R585/ R585/ n the example, R585 manifolds with R594 terminal plugs and R59 ball valves are illustrated, mounted inside cabinet. or cold domestic water, R585 manifolds were used (one manifold with units and one with units) assembled in series one beside the other, in order to obtain 5 units overall for cold domestic water uses. or hot domestic water uses, on the other hand, a single unit manifold was used. The example illustrates the R585 manifolds with R594 terminal plugs and R59 ball valves, mounted inside cabinet R595. or cold domestic water, R585 manifolds were used (one manifold with units and one with units) assembled in series one beside the other, in order to obtain 5 units overall for cold domestic water uses. or hot domestic water uses, on the other hand, a single unit manifold was used.
0687N November 017 Modular manifolds for domestic water systems with outputs connection 1/ or /4 urocone R580 - R585 imensions R580 Ø Product code Size x Ø R580Y0 8 R580Y0 1/ 15,5,5 8,5 45 5 1 117 R580Y04 /4 M 15 x R580Y06 /4 8 R595 R580Y06 1/ 16,5,5 8,5 45 5 1 117 R580Y064 15 R580Y05 9 R580Y05 1 M x /4 18 6 6 5 40 8 1 1 R580Y054 17 R585 Y001 417 04 110 90 R595Y001 70 00 110 90 R595Y001 50 00 110 90 R595Y001 670 00 110 90 Product code Size x Ø Ø R585Y0 8 R585Y0 /4 M x 1/ 15,5,5 8,5 69 5 1 117 /4 R585Y04 15 R585Y06 8 R585Y06 /4 M x 1/ 16,5,5 8,5 69 5 1 117 /4 R585Y064 15 Product specifications R580 - outlets 1/ or /4 Simple modular manifold in brass. vailable with /4 M connection + 1/ outlets with 5 mm of centre distance or 1 M connection + /4 outlets with 40 mm of centre distance. With connections for adaptors for copper, plastic or multilayer pipe. Temperature range 5 110. Max. working pressure 10 bar. R585 - outlets 1/ Simple modular manifold for domestic installations, with shut-off valves, in brass. vailable with /4 M connection + 1/ outlets with 5 mm of centre distance. With connections for adaptors for copper, plastic or multilayer pipe. Temperature range 5 100. Max. working pressure 10 bar. Plastic cabinet with door and frame. oor closure with bayonet connection without screw fixture. or manifolds R580, R585. R598 Plastic supports for manifolds R580, R585. or use with cabinet. R595 Plastic cabinet with door. oor closure with fixing screws. or R580, R585 manifolds with centre distance of 5 mm. R598 Plastic supports for manifolds R580, R585. or use with cabinet R595. dditional information or more information, go to www.giacomini.com or contact our technical assistance service: ' +9 0 97 6 +9 0 955 * consulenza.prodotti@giacomini.com This document provides only general indications. iacomini S.p.. may change at any time, without notice and for technical or commercial reasons, the items included herewith. The information included in this technical sheet do not exempt the user from strictly complying with the rules and good practice standards in force. iacomini S.p.. Via per lzo, 9-8017 San Maurizio d Opaglio (NO) taly 4
018N October 015 Modular manifolds for sanitary water systems with base 16 outputs connections R580 - R585 SO 9001 0006/7 SO 14001 00/ OHSS 18001 0064/1 ompletion codes daptors for manifolds with base 16 outputs - or plastic or multilayer pipes: R179MX01: 16 x (14 x ) R179MX014: 16 x (16 x ) R179MX01: 16 x (16 x,) R179MX016: 16 x (16, x,6) R179MX019: 16 x (17 x ) R179MX015: 16 x (18 x ) R179MX00: 16 x (0 x ) R179MX06: 16 x (0 x,5) R179MX01: 16 x (0 x,5) R179MX07: 16 x (0 x,9) R580 escription The R585 (with shut-off valve) and R580 (without shut-off valve) modular manifolds by iacomini satisfy the growing demand for products for the distribution of sanitary water which offer ease of installation, operational reliability and more generally, excellent attention to detail, contributing to an increased level of quality perceived by the users. Versions and product codes Series imension N. of outputs R580 R585 R585 R580Y0 R580Y0 /4 M (SO 8) x base 16 R580Y04 4 R580Y04 R580Y04 1 M (SO 8) x base 16 R580Y044 4 R585Y0 R585Y0 /4 M (SO 8) x base 16 R585Y04 4 R585Y04 R585Y04 1 M (SO 8) x base 16 R585Y044 4 - or plastic pipes: R179X04: 16 x (15 x ) R179X041: 16 x (16 x 1,5) R179X046: 16 x (18 x,5) - or copper pipes: R178X01: 16 x 10 R178X01: 16 x 1 R178X015: 16 x 14 R178X016: 16 x 15 R178X018: 16 x 16 plastic cabinet Y001: 400 x 00 x 90 mm R598 support kit for plastic cabinets R598Y001: /4 R598Y00: 1 Technical data Temperature range: 5 100 Max. working pressure: 10 bar R580 manifold outputs center distance: 5 mm R585 manifold outputs center distance: 50 mm osses of pressure p [mm H O] 1000 1,6 100 10 10 100 1000 10000 Q [l/h] Manifold v R585 /4 x base 16 1,6 1
018N October 015 Modular manifolds for sanitary water systems with base 16 outputs connections R580 - R585 SO 9001 0006/7 SO 14001 00/ OHSS 18001 0064/1 Main features nstallation cabinet installation Manifolds are installed in the cabinet on horizontal rails using the special R598 sliding supports, offering total freedom of positioning. n addition, the large slots on the bottom of the cabinet enable to easily install manifolds with different center distances. No tool is required to open the door to quickly activate the shut-off valves and it can be securely closed fitting it in the grooves on the frame surface. These manifolds are manufactured by using a mold, removing the burrs from all internal surfaces and thus conferring extreme solidity and reduced roughness to the product. The R585 manifold cross-section shows how the connections have been designed so as to offer the widest passage possible. n addition, the stopper seal is guaranteed by an PM front gasket. The shut-off valve is made by two pieces so the space occupied by the manifold is not affected by the position of the stopper; this prevents the handwheels from obstructing the cabinet door during ordinary operation, that is with the shut-off valves completely or partially open. R585 and R580 modular manifolds are not treated for surface finish so as to reduce to the minimum the presence of alloy impurities, thus complying with the provisions set forth by the 98/8 uropean irective, transposed in taly with ecree of pril 6 004, n. 174 - Ministry of Health - Regulation concerning materials and items used in fixed systems for catchment, treatment, adduction and distribution of human consumption water, published on Official azette n. 166 of July 17 004 and enforced on July 17 007. The handwheels connected to the shut-off valve by a screw are equipped with two plates: - one showing the corresponding supplied system; - the other, red on one end and blue on the other, overlaps the first one and promptly displays whether hot or cold sanitary water is flowing inside the manifold. This also allows to optimise the quantity of products in the warehouse. xample R585/ + R585/ R598 R585/ The example shows the R585 manifolds with R594 end caps and R59 ball valves installed in the cabinet. This installation uses n. R585 manifolds (one -outputs manifold + one -outputs manifold) assembled one next to the other for a total of 5 outputs for systems requiring cold sanitary water. or systems requiring hot sanitary water, only one -outputs manifold has been used.
018N October 015 Modular manifolds for sanitary water systems with base 16 outputs connections R580 - R585 SO 9001 0006/7 SO 14001 00/ OHSS 18001 0064/1 imensions R580 Product specifications R580 - base 16 outputs rass basic modular manifold. vailable with /4 M or 1 M connection. ase 16 outputs, 5 mm center distance, for copper, plastic or multilayer pipe adaptors. Temperature range 5 110. Max. working pressure 10 bar. R585 - base 16 outputs rass basic modular manifold for sanitary water systems with shut-off valves. vailable with /4 M or 1 M connection. ase 16 outputs, center distance 50 mm, for copper, plastic or multilayer pipe adaptors. Temperature range 5 110. Max. working pressure 10 bar. im. x R580Y0 97 R580Y0 /4 M x 16 0 8 46 5 1 1 /4 R580Y04 167 Plastic cabinet with door and frame. oor closure with bayonet connection without screw fixture. or manifolds R580, R585. R598 Plastic supports for manifolds R580, R585. or use with cabinet. R580Y04 97 R580Y04 1 M x 16 0 55 5 9 1 1 R580Y044 167 R585 im. x R585Y0 11 R585Y0 /4 M x 16 0 4 58 50 1 16 /4 R585Y04 1 R585Y04 11 R585Y04 1 M x 16 0 45 65 50 9 16 1 R585Y044 1 Y001 417 04 110 90
018N October 015 Modular manifolds for sanitary water systems with base 16 outputs connections R580 - R585 SO 9001 0006/7 SO 14001 00/ OHSS 18001 0064/1 dditional information or additional information please check the website www.giacomini.com or contact the technical service: ' +9 0 97 6 +9 0 955 * consulenza.prodotti@giacomini.com This pamphlet is merely for information purposes. iacomini S.p.. retains the right to make modifications for technical or commercial reasons, without prior notice, to the items described in this pamphlet. The information described in this technical pamphlet does not exempt the user from following carefully the existing regulations and norms on good workmanship. iacomini S.p.. Via per lzo, 9-8017 San Maurizio d Opaglio (NO) taly 4